ARM: SoC: platform support for v4.2

Our SoC branch usually contains expanded support for new SoCs and other core platform code. Some highlights from this round: - sunxi: SMP support for A23 SoC - socpga: big-endian support - pxa: conversion to common clock framework - bcm: SMP support for BCM63138 - imx: support new I.MX7D SoC - zte: basic support for ZX296702 SoC Conflicts: arch/arm/mach-socfpga/core.h Trivial remove/remove conflict with our cleanup branch. Resolution: remove both sides -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJVi4RMAAoJEFk3GJrT+8Zl6/kP/1Rv9O++1Kxua6R54Og6AF1J 0miFr2fnUrUWUYg/NVbseRH5bBe6N6ir3SQMfde8W2/QibEjOoEwSwrle+mC/eiq CE0x0gtyRvXMrMU/FWkOvbmmw9uv5oz1z3IHZV6AiecNuSMLUBPfamryikQ8C+d1 O/QZtX543tJQJDOBihO5cuhoVVM37UX0unNmqGsyswlyqTPF8FxcIJAYVNtnxjmj AFaOB0nDJKLKFTiX2Ype2wOxxJX1lrLatNo4W4T+YaaK+i1uCOhgTdSN+n49K7YA KNDFEgZFQqT8VMJyG+eJVeYF+cI7yWQ7lBzIftPUjPk/7+dIHBjWPz2QdjVz3U38 kxncf4S9xGAF5G2rcKe4mFrfT3Y8QLWQpA/jFs06yLwW1O3Hlfq3DzMdGNcF7hth 17LOP8namn9+NepZEp/vAlFzRRypxWWtbkPNBIItkImC6zn0IiGjBy50DE1io27W hmQcnMb7d+0wWl2Y8OmR2lZSB97JiRZkRYMCVHVt+0zGJzp4prLvl9wbjh1VXkPv ERCDJ9nCmZsl7ZVmIXMI7KNXYuPNp7R/QAzCvuSUueswF0qxTAQ0VSSBwRMqvQsQ UUNC6p63VnjUeMUdn2EBsUQZ0Uqw3t2U5TtvooHNt9FkiGsSpwjWrvVD+LItaPoJ GPeeJrJaYQsDvTrO8wjU =ZtPK -----END PGP SIGNATURE----- Merge tag 'armsoc-soc' into test-merge ARM: SoC: platform support for v4.2 Our SoC branch usually contains expanded support for new SoCs and other core platform code. Some highlights from this round: - sunxi: SMP support for A23 SoC - socpga: big-endian support - pxa: conversion to common clock framework - bcm: SMP support for BCM63138 - imx: support new I.MX7D SoC - zte: basic support for ZX296702 SoC Conflicts: arch/arm/mach-socfpga/core.h Trivial remove/remove conflict with our cleanup branch. Resolution: remove both sides # gpg: Signature made Wed Jun 24 21:32:12 2015 PDT using RSA key ID D3FBC665 # gpg: Good signature from "Kevin Hilman <khilman@deeprootsystems.com>" # gpg: aka "Kevin Hilman <khilman@linaro.org>" # gpg: aka "Kevin Hilman <khilman@kernel.org>" # Conflicts: # arch/arm/mach-socfpga/core.h
2015-06-24 21:32:13 -07:00 · 2015-06-24 21:32:13 -07:00 · 03fa626774
commit 03fa626774
parent 8d2977bf36 2879e43f09
225 changed files with 6677 additions and 2077 deletions
--- a/Documentation/arm/stm32/overview.txt
+++ b/Documentation/arm/stm32/overview.txt
@ -0,0 +1,32 @@
+			STM32 ARM Linux Overview
+			========================
+
+Introduction
+------------
+
+  The STMicroelectronics family of Cortex-M based MCUs are supported by the
+  'STM32' platform of ARM Linux. Currently only the STM32F429 is supported.
+
+
+Configuration
+-------------
+
+  A generic configuration is provided for STM32 family, and can be used as the
+  default by
+	make stm32_defconfig
+
+Layout
+------
+
+  All the files for multiple machine families are located in the platform code
+  contained in arch/arm/mach-stm32
+
+  There is a generic board board-dt.c in the mach folder which support
+  Flattened Device Tree, which means, it works with any compatible board with
+  Device Trees.
+
+
+Document Author
+---------------
+
+  Maxime Coquelin <mcoquelin.stm32@gmail.com>
--- a/Documentation/arm/stm32/stm32f429-overview.txt
+++ b/Documentation/arm/stm32/stm32f429-overview.txt
@ -0,0 +1,22 @@
+			STM32F429 Overview
+			==================
+
+  Introduction
+  ------------
+	The STM32F429 is a Cortex-M4 MCU aimed at various applications.
+	It features:
+	- ARM Cortex-M4 up to 180MHz with FPU
+	- 2MB internal Flash Memory
+	- External memory support through FMC controller (PSRAM, SDRAM, NOR, NAND)
+	- I2C, SPI, SAI, CAN, USB OTG, Ethernet controllers
+	- LCD controller & Camera interface
+	- Cryptographic processor
+
+  Resources
+  ---------
+	Datasheet and reference manual are publicly available on ST website:
+	- http://www.st.com/web/en/catalog/mmc/FM141/SC1169/SS1577/LN1806?ecmp=stm32f429-439_pron_pr-ces2014_nov2013
+
+  Document Author
+  ---------------
+	Maxime Coquelin <mcoquelin.stm32@gmail.com>
--- a/Documentation/devicetree/bindings/arm/cpus.txt
+++ b/Documentation/devicetree/bindings/arm/cpus.txt
@ -188,6 +188,7 @@ nodes to be present and contain the properties described below.
 			# On ARM 32-bit systems this property is optional and
 			  can be one of:
 			    "allwinner,sun6i-a31"
+			    "allwinner,sun8i-a23"
 			    "arm,psci"
 			    "brcm,brahma-b15"
 			    "marvell,armada-375-smp"
--- a/Documentation/devicetree/bindings/arm/exynos/power_domain.txt
+++ b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt
@ -19,9 +19,10 @@ Optional Properties:
 	domains.
 - clock-names: The following clocks can be specified:
 	- oscclk: Oscillator clock.
-	- pclkN, clkN: Pairs of parent of input clock and input clock to the
-		devices in this power domain. Maximum of 4 pairs (N = 0 to 3)
-		are supported currently.
+	- clkN: Input clocks to the devices in this power domain. These clocks
+		will be reparented to oscclk before swithing power domain off.
+		Their original parent will be brought back after turning on
+		the domain. Maximum of 4 clocks (N = 0 to 3) are supported.
 	- asbN: Clocks required by asynchronous bridges (ASB) present in
 		the power domain. These clock should be enabled during power
 		domain on/off operations.
--- a/Documentation/devicetree/bindings/arm/fsl.txt
+++ b/Documentation/devicetree/bindings/arm/fsl.txt
@ -81,12 +81,15 @@ Freescale Vybrid Platform Device Tree Bindings
 For the Vybrid SoC familiy all variants with DDR controller are supported,
 which is the VF5xx and VF6xx series. Out of historical reasons, in most
 places the kernel uses vf610 to refer to the whole familiy.
+The compatible string "fsl,vf610m4" is used for the secondary Cortex-M4
+core support.

 Required root node compatible property (one of them):
    - compatible = "fsl,vf500";
    - compatible = "fsl,vf510";
    - compatible = "fsl,vf600";
    - compatible = "fsl,vf610";
+    - compatible = "fsl,vf610m4";

 Freescale LS1021A Platform Device Tree Bindings
 ------------------------------------------------
--- a/Documentation/devicetree/bindings/arm/zte.txt
+++ b/Documentation/devicetree/bindings/arm/zte.txt
@ -0,0 +1,15 @@
+ZTE platforms device tree bindings
+---------------------------------------
+
+-  ZX296702 board:
+    Required root node properties:
+      - compatible = "zte,zx296702-ad1", "zte,zx296702"
+
+System management required properties:
+      - compatible = "zte,sysctrl"
+
+Low power management required properties:
+      - compatible = "zte,zx296702-pcu"
+
+Bus matrix required properties:
+      - compatible = "zte,zx-bus-matrix"
--- a/Documentation/devicetree/bindings/clock/zx296702-clk.txt
+++ b/Documentation/devicetree/bindings/clock/zx296702-clk.txt
@ -0,0 +1,35 @@
+Device Tree Clock bindings for ZTE zx296702
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be one of the following:
+	"zte,zx296702-topcrm-clk":
+		zx296702 top clock selection, divider and gating
+
+	"zte,zx296702-lsp0crpm-clk" and
+	"zte,zx296702-lsp1crpm-clk":
+		zx296702 device level clock selection and gating
+
+- reg: Address and length of the register set
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/zx296702-clock.h
+for the full list of zx296702 clock IDs.
+
+
+topclk: topcrm@0x09800000 {
+        compatible = "zte,zx296702-topcrm-clk";
+        reg = <0x09800000 0x1000>;
+        #clock-cells = <1>;
+};
+
+uart0: serial@0x09405000 {
+        compatible = "zte,zx296702-uart";
+        reg = <0x09405000 0x1000>;
+        interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&lsp1clk ZX296702_UART0_PCLK>;
+        status = "disabled";
+};
--- a/Documentation/devicetree/bindings/serial/pl011.txt
+++ b/Documentation/devicetree/bindings/serial/pl011.txt
@ -1,7 +1,7 @@
 * ARM AMBA Primecell PL011 serial UART

 Required properties:
- compatible: must be "arm,primecell", "arm,pl011"
+- compatible: must be "arm,primecell", "arm,pl011", "zte,zx296702-uart"
 - reg: exactly one register range with length 0x1000
 - interrupts: exactly one interrupt specifier

--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@ -211,3 +211,4 @@ xillybus	Xillybus Ltd.
 xlnx	Xilinx
 zyxel	ZyXEL Communications Corp.
 zarlink	Zarlink Semiconductor
+zte	ZTE Corp.
--- a/38
+++ b/38
@ -1035,7 +1035,7 @@ F:	arch/arm/include/asm/hardware/dec21285.h
 F:	arch/arm/mach-footbridge/

 ARM/FREESCALE IMX / MXC ARM ARCHITECTURE
-M:	Shawn Guo <shawn.guo@linaro.org>
+M:	Shawn Guo <shawnguo@kernel.org>
 M:	Sascha Hauer <kernel@pengutronix.de>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
@ -1044,9 +1044,11 @@ F:	arch/arm/mach-imx/
 F:	arch/arm/mach-mxs/
 F:	arch/arm/boot/dts/imx*
 F:	arch/arm/configs/imx*_defconfig
+F:	drivers/clk/imx/
+F:	include/soc/imx/

 ARM/FREESCALE VYBRID ARM ARCHITECTURE
-M:	Shawn Guo <shawn.guo@linaro.org>
+M:	Shawn Guo <shawnguo@kernel.org>
 M:	Sascha Hauer <kernel@pengutronix.de>
 R:	Stefan Agner <stefan@agner.ch>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@ -1189,6 +1191,12 @@ M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained

+ARM/LPC18XX ARCHITECTURE
+M:	Joachim Eastwood <manabian@gmail.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+N:	lpc18xx
+
 ARM/MAGICIAN MACHINE SUPPORT
 M:	Philipp Zabel <philipp.zabel@gmail.com>
 S:	Maintained
@ -1385,6 +1393,7 @@ L:	linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/boot/dts/s3c*
 F:	arch/arm/boot/dts/exynos*
+F:	arch/arm64/boot/dts/exynos/
 F:	arch/arm/plat-samsung/
 F:	arch/arm/mach-s3c24*/
 F:	arch/arm/mach-s3c64xx/
@ -1494,6 +1503,14 @@ F:	drivers/usb/host/ehci-st.c
 F:	drivers/usb/host/ohci-st.c
 F:	drivers/ata/ahci_st.c

+ARM/STM32 ARCHITECTURE
+M:	Maxime Coquelin <mcoquelin.stm32@gmail.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/stm32.git
+N:	stm32
+F:	drivers/clocksource/armv7m_systick.c
+
 ARM/TECHNOLOGIC SYSTEMS TS7250 MACHINE SUPPORT
 M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@ -1540,6 +1557,13 @@ F:	drivers/rtc/rtc-ab3100.c
 F:	drivers/rtc/rtc-coh901331.c
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson.git

+ARM/UNIPHIER ARCHITECTURE
+M:	Masahiro Yamada <yamada.masahiro@socionext.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	arch/arm/mach-uniphier/
+N:	uniphier
+
 ARM/Ux500 ARM ARCHITECTURE
 M:	Linus Walleij <linus.walleij@linaro.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@ -1617,6 +1641,15 @@ S:	Maintained
 F:	arch/arm/mach-pxa/z2.c
 F:	arch/arm/mach-pxa/include/mach/z2.h

+ARM/ZTE ARCHITECTURE
+M:	Jun Nie <jun.nie@linaro.org>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	arch/arm/mach-zx/
+F:	drivers/clk/zte/
+F:	Documentation/devicetree/bindings/arm/zte.txt
+F:	Documentation/devicetree/bindings/clock/zx296702-clk.txt
+
 ARM/ZYNQ ARCHITECTURE
 M:	Michal Simek <michal.simek@xilinx.com>
 R:	Sören Brinkmann <soren.brinkmann@xilinx.com>
@ -2193,6 +2226,7 @@ S:	Maintained
 F:	arch/arm/mach-bcm/*brcmstb*
 F:	arch/arm/boot/dts/bcm7*.dts*
 F:	drivers/bus/brcmstb_gisb.c
+N:	brcmstb

 BROADCOM BMIPS MIPS ARCHITECTURE
 M:	Kevin Cernekee <cernekee@gmail.com>
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@ -329,6 +329,20 @@ config ARCH_MULTIPLATFORM
 	select SPARSE_IRQ
 	select USE_OF

+config ARM_SINGLE_ARMV7M
+	bool "ARMv7-M based platforms (Cortex-M0/M3/M4)"
+	depends on !MMU
+	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select ARM_NVIC
+	select AUTO_ZRELADDR
+	select CLKSRC_OF
+	select COMMON_CLK
+	select CPU_V7M
+	select GENERIC_CLOCKEVENTS
+	select NO_IOPORT_MAP
+	select SPARSE_IRQ
+	select USE_OF
+
 config ARCH_REALVIEW
 	bool "ARM Ltd. RealView family"
 	select ARCH_WANT_OPTIONAL_GPIOLIB
@ -398,24 +412,6 @@ config ARCH_EBSA110
 	  Ethernet interface, two PCMCIA sockets, two serial ports and a
 	  parallel port.

-config ARCH_EFM32
-	bool "Energy Micro efm32"
-	depends on !MMU
-	select ARCH_REQUIRE_GPIOLIB
-	select ARM_NVIC
-	select AUTO_ZRELADDR
-	select CLKSRC_OF
-	select COMMON_CLK
-	select CPU_V7M
-	select GENERIC_CLOCKEVENTS
-	select NO_DMA
-	select NO_IOPORT_MAP
-	select SPARSE_IRQ
-	select USE_OF
-	help
-	  Support for Energy Micro's (now Silicon Labs) efm32 Giant Gecko
-	  processors.
-
 config ARCH_EP93XX
 	bool "EP93xx-based"
 	select ARCH_HAS_HOLES_MEMORYMODEL
@ -606,6 +602,7 @@ config ARCH_PXA
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_CPU_SUSPEND if PM
 	select AUTO_ZRELADDR
+	select COMMON_CLK
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
 	select CLKSRC_OF
@ -752,8 +749,10 @@ config ARCH_OMAP1
 	select GENERIC_IRQ_CHIP
 	select HAVE_IDE
 	select IRQ_DOMAIN
+	select MULTI_IRQ_HANDLER
 	select NEED_MACH_IO_H if PCCARD
 	select NEED_MACH_MEMORY_H
+	select SPARSE_IRQ
 	help
 	  Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx)

@ -937,6 +936,8 @@ source "arch/arm/mach-tegra/Kconfig"

 source "arch/arm/mach-u300/Kconfig"

+source "arch/arm/mach-uniphier/Kconfig"
+
 source "arch/arm/mach-ux500/Kconfig"

 source "arch/arm/mach-versatile/Kconfig"
@ -948,8 +949,40 @@ source "arch/arm/mach-vt8500/Kconfig"

 source "arch/arm/mach-w90x900/Kconfig"

+source "arch/arm/mach-zx/Kconfig"
+
 source "arch/arm/mach-zynq/Kconfig"

+# ARMv7-M architecture
+config ARCH_EFM32
+	bool "Energy Micro efm32"
+	depends on ARM_SINGLE_ARMV7M
+	select ARCH_REQUIRE_GPIOLIB
+	help
+	  Support for Energy Micro's (now Silicon Labs) efm32 Giant Gecko
+	  processors.
+
+config ARCH_LPC18XX
+	bool "NXP LPC18xx/LPC43xx"
+	depends on ARM_SINGLE_ARMV7M
+	select ARCH_HAS_RESET_CONTROLLER
+	select ARM_AMBA
+	select CLKSRC_LPC32XX
+	select PINCTRL
+	help
+	  Support for NXP's LPC18xx Cortex-M3 and LPC43xx Cortex-M4
+	  high performance microcontrollers.
+
+config ARCH_STM32
+	bool "STMicrolectronics STM32"
+	depends on ARM_SINGLE_ARMV7M
+	select ARCH_HAS_RESET_CONTROLLER
+	select ARMV7M_SYSTICK
+	select CLKSRC_STM32
+	select RESET_CONTROLLER
+	help
+	  Support for STMicroelectronics STM32 processors.
+
 # Definitions to make life easier
 config ARCH_ACORN
 	bool
@ -1477,7 +1510,8 @@ config ARM_PSCI
 # selected platforms.
 config ARCH_NR_GPIO
 	int
-	default 1024 if ARCH_SHMOBILE || ARCH_TEGRA || ARCH_ZYNQ
+	default 1024 if ARCH_BRCMSTB || ARCH_SHMOBILE || ARCH_TEGRA || \
+		ARCH_ZYNQ
 	default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 || \
 		SOC_DRA7XX || ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210
 	default 416 if ARCH_SUNXI
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@ -410,6 +410,13 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on i.MX6SX.

+	config DEBUG_IMX7D_UART
+		bool "i.MX7D Debug UART"
+		depends on SOC_IMX7D
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on i.MX7D.
+
 	config DEBUG_KEYSTONE_UART0
 		bool "Kernel low-level debugging on KEYSTONE2 using UART0"
 		depends on ARCH_KEYSTONE
@ -433,6 +440,14 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on KS8695.

+	config DEBUG_LPC18XX_UART0
+		bool "Kernel low-level debugging via LPC18xx/43xx UART0"
+		depends on ARCH_LPC18XX
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on NXP LPC18xx/43xx UART0.
+
 	config DEBUG_MESON_UARTAO
 		bool "Kernel low-level debugging via Meson6 UARTAO"
 		depends on ARCH_MESON
@ -908,13 +923,22 @@ choice
 		  on SA-11x0 UART ports. The kernel will check for the first
 		  enabled UART in a sequence 3-1-2.

-	config DEBUG_SOCFPGA_UART
+	config DEBUG_SOCFPGA_UART0
 		depends on ARCH_SOCFPGA
-		bool "Use SOCFPGA UART for low-level debug"
+		bool "Use SOCFPGA UART0 for low-level debug"
 		select DEBUG_UART_8250
 		help
 		  Say Y here if you want kernel low-level debugging support
-		  on SOCFPGA based platforms.
+		  on SOCFPGA(Cyclone 5 and Arria 5) based platforms.
+
+	config DEBUG_SOCFPGA_UART1
+		depends on ARCH_SOCFPGA
+		bool "Use SOCFPGA UART1 for low-level debug"
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on SOCFPGA(Arria 10) based platforms.
+

 	config DEBUG_SUN9I_UART0
 		bool "Kernel low-level debugging messages via sun9i UART0"
@ -1157,6 +1181,18 @@ choice
 		  For more details about semihosting, please see
 		  chapter 8 of DUI0203I_rvct_developer_guide.pdf from ARM Ltd.

+	config DEBUG_ZTE_ZX
+		bool "Use ZTE ZX UART"
+		select DEBUG_UART_PL01X
+		depends on ARCH_ZX
+		help
+		  Say Y here if you are enabling ZTE ZX296702 SOC and need
+		  debug uart support.
+
+		  This option is preferred over the platform specific
+		  options; the platform specific options are deprecated
+		  and will be soon removed.
+
 	config DEBUG_LL_UART_8250
 		bool "Kernel low-level debugging via 8250 UART"
 		help
@ -1231,7 +1267,8 @@ config DEBUG_IMX_UART_PORT
 						DEBUG_IMX53_UART || \
 						DEBUG_IMX6Q_UART || \
 						DEBUG_IMX6SL_UART || \
-						DEBUG_IMX6SX_UART
+						DEBUG_IMX6SX_UART || \
+						DEBUG_IMX7D_UART
 	default 1
 	depends on ARCH_MXC
 	help
@ -1281,7 +1318,8 @@ config DEBUG_LL_INCLUDE
 				 DEBUG_IMX53_UART ||\
 				 DEBUG_IMX6Q_UART || \
 				 DEBUG_IMX6SL_UART || \
-				 DEBUG_IMX6SX_UART
+				 DEBUG_IMX6SX_UART || \
+				 DEBUG_IMX7D_UART
 	default "debug/ks8695.S" if DEBUG_KS8695_UART
 	default "debug/msm.S" if DEBUG_QCOM_UARTDM
 	default "debug/netx.S" if DEBUG_NETX_UART
@ -1337,6 +1375,7 @@ config DEBUG_UART_PHYS
 	default 0x02531000 if DEBUG_KEYSTONE_UART1
 	default 0x03010fe0 if ARCH_RPC
 	default 0x07000000 if DEBUG_SUN9I_UART0
+	default 0x09405000 if DEBUG_ZTE_ZX
 	default 0x10009000 if DEBUG_REALVIEW_STD_PORT || \
 				DEBUG_VEXPRESS_UART0_CA9
 	default 0x1010c000 if DEBUG_REALVIEW_PB1176_PORT
@ -1359,6 +1398,7 @@ config DEBUG_UART_PHYS
 	default 0x20201000 if DEBUG_BCM2835
 	default 0x3e000000 if DEBUG_BCM_KONA_UART
 	default 0x4000e400 if DEBUG_LL_UART_EFM32
+	default 0x40081000 if DEBUG_LPC18XX_UART0
 	default 0x40090000 if ARCH_LPC32XX
 	default 0x40100000 if DEBUG_PXA_UART1
 	default 0x42000000 if ARCH_GEMINI
@ -1407,7 +1447,8 @@ config DEBUG_UART_PHYS
 	default 0xfd883000 if DEBUG_ALPINE_UART0
 	default 0xfe800000 if ARCH_IOP32X
 	default 0xff690000 if DEBUG_RK32_UART2
-	default 0xffc02000 if DEBUG_SOCFPGA_UART
+	default 0xffc02000 if DEBUG_SOCFPGA_UART0
+	default 0xffc02100 if DEBUG_SOCFPGA_UART1
 	default 0xffd82340 if ARCH_IOP13XX
 	default 0xffe40000 if DEBUG_RCAR_GEN1_SCIF0
 	default 0xffe42000 if DEBUG_RCAR_GEN1_SCIF2
@ -1466,6 +1507,7 @@ config DEBUG_UART_VIRT
 	default 0xfb009000 if DEBUG_REALVIEW_STD_PORT
 	default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT
 	default 0xfc40ab00 if DEBUG_BRCMSTB_UART
+	default 0xfc705000 if DEBUG_ZTE_ZX
 	default 0xfcfe8600 if DEBUG_UART_BCM63XX
 	default 0xfd000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX
 	default 0xfd000000 if ARCH_SPEAR13XX
@ -1485,7 +1527,8 @@ config DEBUG_UART_VIRT
 	default 0xfeb26000 if DEBUG_RK3X_UART1
 	default 0xfeb30c00 if DEBUG_KEYSTONE_UART0
 	default 0xfeb31000 if DEBUG_KEYSTONE_UART1
-	default 0xfec02000 if DEBUG_SOCFPGA_UART
+	default 0xfec02000 if DEBUG_SOCFPGA_UART0
+	default 0xfec02100 if DEBUG_SOCFPGA_UART1
 	default 0xfec12000 if DEBUG_MVEBU_UART0 || DEBUG_MVEBU_UART0_ALTERNATE
 	default 0xfec12100 if DEBUG_MVEBU_UART1_ALTERNATE
 	default 0xfec10000 if DEBUG_SIRFATLAS7_UART0
@ -1530,8 +1573,9 @@ config DEBUG_UART_8250_WORD
 	bool "Use 32-bit accesses for 8250 UART"
 	depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
 	depends on DEBUG_UART_8250_SHIFT >= 2
-	default y if DEBUG_PICOXCELL_UART || DEBUG_SOCFPGA_UART || \
-		ARCH_KEYSTONE || DEBUG_ALPINE_UART0 || \
+	default y if DEBUG_PICOXCELL_UART || DEBUG_SOCFPGA_UART0 || \
+		DEBUG_SOCFPGA_UART1 || ARCH_KEYSTONE || \
+		DEBUG_ALPINE_UART0 || \
 		DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \
 		DEBUG_DAVINCI_DA8XX_UART2 || \
 		DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2 || \
@ -1544,7 +1588,7 @@ config DEBUG_UART_8250_FLOW_CONTROL

 config DEBUG_UNCOMPRESS
 	bool
-	depends on ARCH_MULTIPLATFORM || PLAT_SAMSUNG
+	depends on ARCH_MULTIPLATFORM || PLAT_SAMSUNG || ARM_SINGLE_ARMV7M
 	default y if DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \
 		     (!DEBUG_TEGRA_UART || !ZBOOT_ROM)
 	help
@ -1561,7 +1605,7 @@ config DEBUG_UNCOMPRESS
 config UNCOMPRESS_INCLUDE
 	string
 	default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM || \
-					PLAT_SAMSUNG || ARCH_EFM32 || \
+					PLAT_SAMSUNG || ARM_SINGLE_ARMV7M || \
 					ARCH_SHMOBILE_LEGACY
 	default "mach/uncompress.h"

--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@ -167,6 +167,7 @@ machine-$(CONFIG_ARCH_IOP33X)		+= iop33x
 machine-$(CONFIG_ARCH_IXP4XX)		+= ixp4xx
 machine-$(CONFIG_ARCH_KEYSTONE)		+= keystone
 machine-$(CONFIG_ARCH_KS8695)		+= ks8695
+machine-$(CONFIG_ARCH_LPC18XX)		+= lpc18xx
 machine-$(CONFIG_ARCH_LPC32XX)		+= lpc32xx
 machine-$(CONFIG_ARCH_MESON)		+= meson
 machine-$(CONFIG_ARCH_MMP)		+= mmp
@ -196,14 +197,17 @@ machine-$(CONFIG_ARCH_SHMOBILE) 	+= shmobile
 machine-$(CONFIG_ARCH_SIRF)		+= prima2
 machine-$(CONFIG_ARCH_SOCFPGA)		+= socfpga
 machine-$(CONFIG_ARCH_STI)		+= sti
+machine-$(CONFIG_ARCH_STM32)		+= stm32
 machine-$(CONFIG_ARCH_SUNXI)		+= sunxi
 machine-$(CONFIG_ARCH_TEGRA)		+= tegra
 machine-$(CONFIG_ARCH_U300)		+= u300
 machine-$(CONFIG_ARCH_U8500)		+= ux500
+machine-$(CONFIG_ARCH_UNIPHIER)		+= uniphier
 machine-$(CONFIG_ARCH_VERSATILE)	+= versatile
 machine-$(CONFIG_ARCH_VEXPRESS)		+= vexpress
 machine-$(CONFIG_ARCH_VT8500)		+= vt8500
 machine-$(CONFIG_ARCH_W90X900)		+= w90x900
+machine-$(CONFIG_ARCH_ZX)		+= zx
 machine-$(CONFIG_ARCH_ZYNQ)		+= zynq
 machine-$(CONFIG_PLAT_SPEAR)		+= spear

--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@ -660,6 +660,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
 	mt6592-evb.dtb \
 	mt8127-moose.dtb \
 	mt8135-evbp1.dtb
+dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
 endif

 always		:= $(dtb-y)
--- a/arch/arm/boot/dts/zx296702-ad1.dts
+++ b/arch/arm/boot/dts/zx296702-ad1.dts
@ -0,0 +1,48 @@
+
+/dts-v1/;
+
+#include "zx296702.dtsi"
+
+/ {
+	model = "ZTE ZX296702 AD1 Board";
+	compatible = "zte,zx296702-ad1", "zte,zx296702";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	memory {
+		reg = <0x50000000 0x20000000>;
+	};
+};
+
+&mmc0 {
+	num-slots = <1>;
+	supports-highspeed;
+	non-removable;
+	disable-wp;
+	status = "okay";
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+	};
+};
+
+&mmc1 {
+	num-slots = <1>;
+	supports-highspeed;
+	non-removable;
+	disable-wp;
+	status = "okay";
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <8>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
--- a/arch/arm/boot/dts/zx296702.dtsi
+++ b/arch/arm/boot/dts/zx296702.dtsi
@ -0,0 +1,139 @@
+
+#include "skeleton.dtsi"
+#include <dt-bindings/clock/zx296702-clock.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "zte,zx296702-smp";
+
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			next-level-cache = <&l2cc>;
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			next-level-cache = <&l2cc>;
+			reg = <1>;
+		};
+	};
+
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&intc>;
+		ranges;
+
+		matrix: bus-matrix@400000 {
+			compatible = "zte,zx-bus-matrix";
+			reg = <0x00400000 0x1000>;
+		};
+
+		intc: interrupt-controller@00801000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			interrupt-controller;
+			reg = <0x00801000 0x1000>,
+			      <0x00800100 0x100>;
+		};
+
+		global_timer: timer@008000200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x00800200 0x20>;
+			interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&intc>;
+			clocks = <&topclk ZX296702_A9_PERIPHCLK>;
+		};
+
+		l2cc: l2-cache-controller@0x00c00000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x00c00000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+			arm,data-latency = <1 1 1>;
+			arm,tag-latency = <1 1 1>;
+			arm,double-linefill = <1>;
+			arm,double-linefill-incr = <0>;
+		};
+
+		pcu: pcu@0xa0008000 {
+			compatible = "zte,zx296702-pcu";
+			reg = <0xa0008000 0x1000>;
+		};
+
+		topclk: topclk@0x09800000 {
+			compatible = "zte,zx296702-topcrm-clk";
+			reg = <0x09800000 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		lsp1clk: lsp1clk@0x09400000 {
+			compatible = "zte,zx296702-lsp1crpm-clk";
+			reg = <0x09400000 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		lsp0clk: lsp0clk@0x0b000000 {
+			compatible = "zte,zx296702-lsp0crpm-clk";
+			reg = <0x0b000000 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		uart0: serial@0x09405000 {
+			compatible = "zte,zx296702-uart";
+			reg = <0x09405000 0x1000>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&lsp1clk ZX296702_UART0_WCLK>;
+			status = "disabled";
+		};
+
+		uart1: serial@0x09406000 {
+			compatible = "zte,zx296702-uart";
+			reg = <0x09406000 0x1000>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&lsp1clk ZX296702_UART1_WCLK>;
+			status = "disabled";
+		};
+
+		mmc0: mmc@0x09408000 {
+			compatible = "snps,dw-mshc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x09408000 0x1000>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			fifo-depth = <32>;
+			clocks = <&lsp1clk ZX296702_SDMMC0_PCLK>,
+				 <&lsp1clk ZX296702_SDMMC0_WCLK>;
+			clock-names = "biu", "ciu";
+			status = "disabled";
+		};
+
+		mmc1: mmc@0x0b003000 {
+			compatible = "snps,dw-mshc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0b003000 0x1000>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			fifo-depth = <32>;
+			clocks = <&lsp0clk ZX296702_SDMMC1_PCLK>,
+				 <&lsp0clk ZX296702_SDMMC1_WCLK>;
+			clock-names = "biu", "ciu";
+			status = "disabled";
+		};
+
+		sysctrl: sysctrl@0xa0007000 {
+			compatible = "zte,sysctrl", "syscon";
+			reg = <0xa0007000 0x1000>;
+		};
+	};
+};
--- a/arch/arm/configs/efm32_defconfig
+++ b/arch/arm/configs/efm32_defconfig
@ -16,6 +16,7 @@ CONFIG_EMBEDDED=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
 # CONFIG_MMU is not set
+CONFIG_ARM_SINGLE_ARMV7M=y
 CONFIG_ARCH_EFM32=y
 CONFIG_SET_MEM_PARAM=y
 CONFIG_DRAM_BASE=0x88000000
--- a/arch/arm/configs/zx_defconfig
+++ b/arch/arm/configs/zx_defconfig
@ -0,0 +1,129 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_DEBUG=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_NAMESPACES=y
+CONFIG_USER_NS=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
+CONFIG_SLAB=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_ZX=y
+CONFIG_SOC_ZX296702=y
+# CONFIG_SWP_EMULATE is not set
+CONFIG_ARM_ERRATA_754322=y
+CONFIG_ARM_ERRATA_775420=y
+CONFIG_SMP=y
+CONFIG_VMSPLIT_2G=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_KSM=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_KERNEL_MODE_NEON=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HIBERNATION=y
+CONFIG_PM_RUNTIME=y
+CONFIG_PM_DEBUG=y
+CONFIG_SUSPEND_TIME=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyAMA0,115200 debug earlyprintk root=/dev/ram rw rootwait"
+#CONFIG_NET is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_DMA_CMA=y
+CONFIG_CMA_SIZE_MBYTES=192
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=1
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_UID_STAT=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_CHR_DEV_SCH=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_DM=y
+CONFIG_DM_CRYPT=y
+CONFIG_DM_UEVENT=y
+CONFIG_DM_VERITY=y
+CONFIG_NETDEVICES=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_SERIO=y
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SPI=y
+CONFIG_LOGO=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_CONSOLE_POLL=y
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+CONFIG_MMC_UNSAFE_RESUME=y
+CONFIG_MMC_BLOCK_MINORS=16
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_IDMAC=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_EXT4_DEBUG=y
+CONFIG_FUSE_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=936
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+#CONFIG_NFS_FS is not set
+CONFIG_NLS_CODEPAGE_936=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
+CONFIG_PRINTK_TIME=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_INFO=y
+CONFIG_FRAME_WARN=4096
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_PANIC_TIMEOUT=5
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_RCU_CPU_STALL_TIMEOUT=60
+# CONFIG_FTRACE is not set
+CONFIG_KGDB=y
+CONFIG_KGDB_KDB=y
+# CONFIG_ARM_UNWIND is not set
+CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_LL=y
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_STACKTRACE=y
+CONFIG_DEBUG_ZTE_ZX=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_CRYPTO_LZO=y
+CONFIG_GPIOLIB=y
--- a/arch/arm/include/asm/firmware.h
+++ b/arch/arm/include/asm/firmware.h
@ -33,6 +33,10 @@ struct firmware_ops {
 	 * Sets boot address of specified physical CPU
 	 */
 	int (*set_cpu_boot_addr)(int cpu, unsigned long boot_addr);
+	/*
+	 * Gets boot address of specified physical CPU
+	 */
+	int (*get_cpu_boot_addr)(int cpu, unsigned long *boot_addr);
 	/*
 	 * Boots specified physical CPU
 	 */
--- a/arch/arm/include/asm/vfp.h
+++ b/arch/arm/include/asm/vfp.h
@ -5,6 +5,9 @@
 * First, the standard VFP set.
 */

+#ifndef __ASM_VFP_H
+#define __ASM_VFP_H
+
 #define FPSID			cr0
 #define FPSCR			cr1
 #define MVFR1			cr6
@ -87,3 +90,9 @@
 #define VFPOPDESC_UNUSED_BIT	(24)
 #define VFPOPDESC_UNUSED_MASK	(0xFF << VFPOPDESC_UNUSED_BIT)
 #define VFPOPDESC_OPDESC_MASK	(~(VFPOPDESC_LENGTH_MASK | VFPOPDESC_UNUSED_MASK))
+
+#ifndef __ASSEMBLY__
+void vfp_disable(void);
+#endif
+
+#endif /* __ASM_VFP_H */
--- a/arch/arm/include/debug/8250.S
+++ b/arch/arm/include/debug/8250.S
@ -16,11 +16,14 @@

 #ifdef CONFIG_DEBUG_UART_8250_WORD
 		.macro	store, rd, rx:vararg
+	 ARM_BE8(rev \rd, \rd)
 		str	\rd, \rx
+	 ARM_BE8(rev \rd, \rd)
 		.endm

 		.macro	load, rd, rx:vararg
 		ldr	\rd, \rx
+	ARM_BE8(rev \rd, \rd)
 		.endm
 #else
 		.macro	store, rd, rx:vararg
--- a/arch/arm/include/debug/efm32.S
+++ b/arch/arm/include/debug/efm32.S
@ -16,7 +16,7 @@

 #define	UARTn_TXDATA		0x0034

-		.macro	addruart, rx, tmp
+		.macro	addruart, rx, tmp, tmp2
 		ldr	\rx, =(CONFIG_DEBUG_UART_PHYS)

 		/*
--- a/arch/arm/include/debug/imx-uart.h
+++ b/arch/arm/include/debug/imx-uart.h
@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2012 Freescale Semiconductor, Inc.
+ * Copyright (C) 2012-2015 Freescale Semiconductor, Inc.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
@ -90,6 +90,16 @@
 #define IMX6SX_UART_BASE_ADDR(n) IMX6SX_UART##n##_BASE_ADDR
 #define IMX6SX_UART_BASE(n)	IMX6SX_UART_BASE_ADDR(n)

+#define IMX7D_UART1_BASE_ADDR	0x30860000
+#define IMX7D_UART2_BASE_ADDR	0x30890000
+#define IMX7D_UART3_BASE_ADDR	0x30880000
+#define IMX7D_UART4_BASE_ADDR	0x30a60000
+#define IMX7D_UART5_BASE_ADDR	0x30a70000
+#define IMX7D_UART6_BASE_ADDR	0x30a80000
+#define IMX7D_UART7_BASE_ADDR	0x30a90000
+#define IMX7D_UART_BASE_ADDR(n) IMX7D_UART##n##_BASE_ADDR
+#define IMX7D_UART_BASE(n)	IMX7D_UART_BASE_ADDR(n)
+
 #define IMX_DEBUG_UART_BASE(soc) soc##_UART_BASE(CONFIG_DEBUG_IMX_UART_PORT)

 #ifdef CONFIG_DEBUG_IMX1_UART
@ -114,6 +124,9 @@
 #define UART_PADDR	IMX_DEBUG_UART_BASE(IMX6SL)
 #elif defined(CONFIG_DEBUG_IMX6SX_UART)
 #define UART_PADDR	IMX_DEBUG_UART_BASE(IMX6SX)
+#elif defined(CONFIG_DEBUG_IMX7D_UART)
+#define UART_PADDR	IMX_DEBUG_UART_BASE(IMX7D)
+
 #endif

 #endif /* __DEBUG_IMX_UART_H */
--- a/arch/arm/include/debug/pl01x.S
+++ b/arch/arm/include/debug/pl01x.S
@ -12,6 +12,13 @@
 */
 #include <linux/amba/serial.h>

+#ifdef CONFIG_DEBUG_ZTE_ZX
+#undef UART01x_DR
+#undef UART01x_FR
+#define UART01x_DR     0x04
+#define UART01x_FR     0x14
+#endif
+
 #ifdef CONFIG_DEBUG_UART_PHYS
 		.macro	addruart, rp, rv, tmp
 		ldr	\rp, =CONFIG_DEBUG_UART_PHYS
--- a/arch/arm/kernel/debug.S
+++ b/arch/arm/kernel/debug.S
@ -35,7 +35,7 @@

 #else /* !CONFIG_MMU */
 		.macro	addruart_current, rx, tmp1, tmp2
-		addruart	\rx, \tmp1
+		addruart	\rx, \tmp1, \tmp2
 		.endm

 #endif /* CONFIG_MMU */
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@ -19,6 +19,7 @@ config ARCH_BCM_IPROC
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select PINCTRL
+	select MTD_NAND_BRCMNAND
 	help
 	  This enables support for systems based on Broadcom IPROC architected SoCs.
 	  The IPROC complex contains one or more ARM CPUs along with common
@ -144,6 +145,7 @@ config ARCH_BRCMSTB
 	select BRCMSTB_GISB_ARB
 	select BRCMSTB_L2_IRQ
 	select BCM7120_L2_IRQ
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 	help
 	  Say Y if you intend to run the kernel on a Broadcom ARM-based STB
 	  chipset.
--- a/arch/arm/mach-bcm/Makefile
+++ b/arch/arm/mach-bcm/Makefile
@ -38,7 +38,12 @@ obj-$(CONFIG_ARCH_BCM2835)	+= board_bcm2835.o
 obj-$(CONFIG_ARCH_BCM_5301X)	+= bcm_5301x.o

 # BCM63XXx
-obj-$(CONFIG_ARCH_BCM_63XX)	:= bcm63xx.o
+ifeq ($(CONFIG_ARCH_BCM_63XX),y)
+CFLAGS_bcm63xx_headsmp.o	+= -march=armv7-a
+obj-y				+= bcm63xx.o
+obj-$(CONFIG_SMP)		+= bcm63xx_smp.o bcm63xx_headsmp.o \
+				   bcm63xx_pmb.o
+endif

 ifeq ($(CONFIG_ARCH_BRCMSTB),y)
 CFLAGS_platsmp-brcmstb.o	+= -march=armv7-a
--- a/arch/arm/mach-bcm/bcm63xx_headsmp.S
+++ b/arch/arm/mach-bcm/bcm63xx_headsmp.S
@ -0,0 +1,23 @@
+/*
+ *  Copyright (C) 2015, Broadcom Corporation
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+
+ENTRY(bcm63138_secondary_startup)
+ ARM_BE8(setend	be)
+	/*
+	 * L1 cache does have unpredictable contents at power-up clean its
+	 * contents without flushing
+	 */
+	bl      v7_invalidate_l1
+	nop
+
+	b	secondary_startup
+ENDPROC(bcm63138_secondary_startup)
--- a/arch/arm/mach-bcm/bcm63xx_pmb.c
+++ b/arch/arm/mach-bcm/bcm63xx_pmb.c
@ -0,0 +1,221 @@
+/*
+ * Broadcom BCM63138 PMB initialization for secondary CPU(s)
+ *
+ * Copyright (C) 2015 Broadcom Corporation
+ * Author: Florian Fainelli <f.fainelli@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/spinlock.h>
+#include <linux/reset/bcm63xx_pmb.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include "bcm63xx_smp.h"
+
+/* ARM Control register definitions */
+#define CORE_PWR_CTRL_SHIFT	0
+#define CORE_PWR_CTRL_MASK	0x3
+#define PLL_PWR_ON		BIT(8)
+#define PLL_LDO_PWR_ON		BIT(9)
+#define PLL_CLAMP_ON		BIT(10)
+#define CPU_RESET_N(x)		BIT(13 + (x))
+#define NEON_RESET_N		BIT(15)
+#define PWR_CTRL_STATUS_SHIFT	28
+#define PWR_CTRL_STATUS_MASK	0x3
+#define PWR_DOWN_SHIFT		30
+#define PWR_DOWN_MASK		0x3
+
+/* CPU Power control register definitions */
+#define MEM_PWR_OK		BIT(0)
+#define MEM_PWR_ON		BIT(1)
+#define MEM_CLAMP_ON		BIT(2)
+#define MEM_PWR_OK_STATUS	BIT(4)
+#define MEM_PWR_ON_STATUS	BIT(5)
+#define MEM_PDA_SHIFT		8
+#define MEM_PDA_MASK		0xf
+#define  MEM_PDA_CPU_MASK	0x1
+#define  MEM_PDA_NEON_MASK	0xf
+#define CLAMP_ON		BIT(15)
+#define PWR_OK_SHIFT		16
+#define PWR_OK_MASK		0xf
+#define PWR_ON_SHIFT		20
+#define  PWR_CPU_MASK		0x03
+#define  PWR_NEON_MASK		0x01
+#define PWR_ON_MASK		0xf
+#define PWR_OK_STATUS_SHIFT	24
+#define PWR_OK_STATUS_MASK	0xf
+#define PWR_ON_STATUS_SHIFT	28
+#define PWR_ON_STATUS_MASK	0xf
+
+#define ARM_CONTROL		0x30
+#define ARM_PWR_CONTROL_BASE	0x34
+#define ARM_PWR_CONTROL(x)	(ARM_PWR_CONTROL_BASE + (x) * 0x4)
+#define ARM_NEON_L2		0x3c
+
+/* Perform a value write, then spin until the value shifted by
+ * shift is seen, masked with mask and is different from cond.
+ */
+static int bpcm_wr_rd_mask(void __iomem *master,
+			   unsigned int addr, u32 off, u32 *val,
+			   u32 shift, u32 mask, u32 cond)
+{
+	int ret;
+
+	ret = bpcm_wr(master, addr, off, *val);
+	if (ret)
+		return ret;
+
+	do {
+		ret = bpcm_rd(master, addr, off, val);
+		if (ret)
+			return ret;
+
+		cpu_relax();
+	} while (((*val >> shift) & mask) != cond);
+
+	return ret;
+}
+
+/* Global lock to serialize accesses to the PMB registers while we
+ * are bringing up the secondary CPU
+ */
+static DEFINE_SPINLOCK(pmb_lock);
+
+static int bcm63xx_pmb_get_resources(struct device_node *dn,
+				     void __iomem **base,
+				     unsigned int *cpu,
+				     unsigned int *addr)
+{
+	struct device_node *pmb_dn;
+	struct of_phandle_args args;
+	int ret;
+
+	ret = of_property_read_u32(dn, "reg", cpu);
+	if (ret) {
+		pr_err("CPU is missing a reg node\n");
+		return ret;
+	}
+
+	ret = of_parse_phandle_with_args(dn, "resets", "#reset-cells",
+					 0, &args);
+	if (ret) {
+		pr_err("CPU is missing a resets phandle\n");
+		return ret;
+	}
+
+	pmb_dn = args.np;
+	if (args.args_count != 2) {
+		pr_err("reset-controller does not conform to reset-cells\n");
+		return -EINVAL;
+	}
+
+	*base = of_iomap(args.np, 0);
+	if (!*base) {
+		pr_err("failed remapping PMB register\n");
+		return -ENOMEM;
+	}
+
+	/* We do not need the number of zones */
+	*addr = args.args[0];
+
+	return 0;
+}
+
+int bcm63xx_pmb_power_on_cpu(struct device_node *dn)
+{
+	void __iomem *base;
+	unsigned int cpu, addr;
+	unsigned long flags;
+	u32 val, ctrl;
+	int ret;
+
+	ret = bcm63xx_pmb_get_resources(dn, &base, &cpu, &addr);
+	if (ret)
+		return ret;
+
+	/* We would not know how to enable a third and greater CPU */
+	WARN_ON(cpu > 1);
+
+	spin_lock_irqsave(&pmb_lock, flags);
+
+	/* Check if the CPU is already on and save the ARM_CONTROL register
+	 * value since we will use it later for CPU de-assert once done with
+	 * the CPU-specific power sequence
+	 */
+	ret = bpcm_rd(base, addr, ARM_CONTROL, &ctrl);
+	if (ret)
+		goto out;
+
+	if (ctrl & CPU_RESET_N(cpu)) {
+		pr_info("PMB: CPU%d is already powered on\n", cpu);
+		ret = 0;
+		goto out;
+	}
+
+	/* Power on PLL */
+	ret = bpcm_rd(base, addr, ARM_PWR_CONTROL(cpu), &val);
+	if (ret)
+		goto out;
+
+	val |= (PWR_CPU_MASK << PWR_ON_SHIFT);
+
+	ret = bpcm_wr_rd_mask(base, addr, ARM_PWR_CONTROL(cpu), &val,
+			PWR_ON_STATUS_SHIFT, PWR_CPU_MASK, PWR_CPU_MASK);
+	if (ret)
+		goto out;
+
+	val |= (PWR_CPU_MASK << PWR_OK_SHIFT);
+
+	ret = bpcm_wr_rd_mask(base, addr, ARM_PWR_CONTROL(cpu), &val,
+			PWR_OK_STATUS_SHIFT, PWR_CPU_MASK, PWR_CPU_MASK);
+	if (ret)
+		goto out;
+
+	val &= ~CLAMP_ON;
+
+	ret = bpcm_wr(base, addr, ARM_PWR_CONTROL(cpu), val);
+	if (ret)
+		goto out;
+
+	/* Power on CPU<N> RAM */
+	val &= ~(MEM_PDA_MASK << MEM_PDA_SHIFT);
+
+	ret = bpcm_wr(base, addr, ARM_PWR_CONTROL(cpu), val);
+	if (ret)
+		goto out;
+
+	val |= MEM_PWR_ON;
+
+	ret = bpcm_wr_rd_mask(base, addr, ARM_PWR_CONTROL(cpu), &val,
+			0, MEM_PWR_ON_STATUS, MEM_PWR_ON_STATUS);
+	if (ret)
+		goto out;
+
+	val |= MEM_PWR_OK;
+
+	ret = bpcm_wr_rd_mask(base, addr, ARM_PWR_CONTROL(cpu), &val,
+			0, MEM_PWR_OK_STATUS, MEM_PWR_OK_STATUS);
+	if (ret)
+		goto out;
+
+	val &= ~MEM_CLAMP_ON;
+
+	ret = bpcm_wr(base, addr, ARM_PWR_CONTROL(cpu), val);
+	if (ret)
+		goto out;
+
+	/* De-assert CPU reset */
+	ctrl |= CPU_RESET_N(cpu);
+
+	ret = bpcm_wr(base, addr, ARM_CONTROL, ctrl);
+out:
+	spin_unlock_irqrestore(&pmb_lock, flags);
+	iounmap(base);
+	return ret;
+}
--- a/arch/arm/mach-bcm/bcm63xx_smp.c
+++ b/arch/arm/mach-bcm/bcm63xx_smp.c
@ -0,0 +1,169 @@
+/*
+ * Broadcom BCM63138 DSL SoCs SMP support code
+ *
+ * Copyright (C) 2015, Broadcom Corporation
+ *
+ * Licensed under the terms of the GPLv2
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include <asm/cacheflush.h>
+#include <asm/smp_scu.h>
+#include <asm/smp_plat.h>
+#include <asm/vfp.h>
+
+#include "bcm63xx_smp.h"
+
+/* Size of mapped Cortex A9 SCU address space */
+#define CORTEX_A9_SCU_SIZE	0x58
+
+/*
+ * Enable the Cortex A9 Snoop Control Unit
+ *
+ * By the time this is called we already know there are multiple
+ * cores present.  We assume we're running on a Cortex A9 processor,
+ * so any trouble getting the base address register or getting the
+ * SCU base is a problem.
+ *
+ * Return 0 if successful or an error code otherwise.
+ */
+static int __init scu_a9_enable(void)
+{
+	unsigned long config_base;
+	void __iomem *scu_base;
+	unsigned int i, ncores;
+
+	if (!scu_a9_has_base()) {
+		pr_err("no configuration base address register!\n");
+		return -ENXIO;
+	}
+
+	/* Config base address register value is zero for uniprocessor */
+	config_base = scu_a9_get_base();
+	if (!config_base) {
+		pr_err("hardware reports only one core\n");
+		return -ENOENT;
+	}
+
+	scu_base = ioremap((phys_addr_t)config_base, CORTEX_A9_SCU_SIZE);
+	if (!scu_base) {
+		pr_err("failed to remap config base (%lu/%u) for SCU\n",
+			config_base, CORTEX_A9_SCU_SIZE);
+		return -ENOMEM;
+	}
+
+	scu_enable(scu_base);
+
+	ncores = scu_base ? scu_get_core_count(scu_base) : 1;
+
+	if (ncores > nr_cpu_ids) {
+		pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
+				ncores, nr_cpu_ids);
+		ncores = nr_cpu_ids;
+	}
+
+	/* The BCM63138 SoC has two Cortex-A9 CPUs, CPU0 features a complete
+	 * and fully functional VFP unit that can be used, but CPU1 does not.
+	 * Since we will not be able to trap kernel-mode NEON to force
+	 * migration to CPU0, just do not advertise VFP support at all.
+	 *
+	 * This will make vfp_init bail out and do not attempt to use VFP at
+	 * all, for kernel-mode NEON, we do not want to introduce any
+	 * conditionals in hot-paths, so we just restrict the system to UP.
+	 */
+#ifdef CONFIG_VFP
+	if (ncores > 1) {
+		pr_warn("SMP: secondary CPUs lack VFP unit, disabling VFP\n");
+		vfp_disable();
+
+#ifdef CONFIG_KERNEL_MODE_NEON
+		WARN(1, "SMP: kernel-mode NEON enabled, restricting to UP\n");
+		ncores = 1;
+#endif
+	}
+#endif
+
+	for (i = 0; i < ncores; i++)
+		set_cpu_possible(i, true);
+
+	iounmap(scu_base);	/* That's the last we'll need of this */
+
+	return 0;
+}
+
+static const struct of_device_id bcm63138_bootlut_ids[] = {
+	{ .compatible = "brcm,bcm63138-bootlut", },
+	{ /* sentinel */ },
+};
+
+#define BOOTLUT_RESET_VECT	0x20
+
+static int bcm63138_smp_boot_secondary(unsigned int cpu,
+				       struct task_struct *idle)
+{
+	void __iomem *bootlut_base;
+	struct device_node *dn;
+	int ret = 0;
+	u32 val;
+
+	dn = of_find_matching_node(NULL, bcm63138_bootlut_ids);
+	if (!dn) {
+		pr_err("SMP: unable to find bcm63138 boot LUT node\n");
+		return -ENODEV;
+	}
+
+	bootlut_base = of_iomap(dn, 0);
+	of_node_put(dn);
+
+	if (!bootlut_base) {
+		pr_err("SMP: unable to remap boot LUT base register\n");
+		return -ENOMEM;
+	}
+
+	/* Locate the secondary CPU node */
+	dn = of_get_cpu_node(cpu_logical_map(cpu), NULL);
+	if (!dn) {
+		pr_err("SMP: failed to locate secondary CPU%d node\n", cpu);
+		ret = -ENODEV;
+		goto out;
+	}
+
+	/* Write the secondary init routine to the BootLUT reset vector */
+	val = virt_to_phys(bcm63138_secondary_startup);
+	writel_relaxed(val, bootlut_base + BOOTLUT_RESET_VECT);
+
+	/* Power up the core, will jump straight to its reset vector when we
+	 * return
+	 */
+	ret = bcm63xx_pmb_power_on_cpu(dn);
+	if (ret)
+		goto out;
+out:
+	iounmap(bootlut_base);
+
+	return ret;
+}
+
+static void __init bcm63138_smp_prepare_cpus(unsigned int max_cpus)
+{
+	int ret;
+
+	ret = scu_a9_enable();
+	if (ret) {
+		pr_warn("SMP: Cortex-A9 SCU setup failed\n");
+		return;
+	}
+}
+
+struct smp_operations bcm63138_smp_ops __initdata = {
+	.smp_prepare_cpus	= bcm63138_smp_prepare_cpus,
+	.smp_boot_secondary	= bcm63138_smp_boot_secondary,
+};
+
+CPU_METHOD_OF_DECLARE(bcm63138_smp, "brcm,bcm63138", &bcm63138_smp_ops);
--- a/arch/arm/mach-bcm/bcm63xx_smp.h
+++ b/arch/arm/mach-bcm/bcm63xx_smp.h
@ -0,0 +1,9 @@
+#ifndef __BCM63XX_SMP_H
+#define __BCM63XX_SMP_H
+
+struct device_node;
+
+extern void bcm63138_secondary_startup(void);
+extern int bcm63xx_pmb_power_on_cpu(struct device_node *dn);
+
+#endif /* __BCM63XX_SMP_H */
--- a/arch/arm/mach-bcm/bcm_5301x.c
+++ b/arch/arm/mach-bcm/bcm_5301x.c
@ -18,15 +18,16 @@ static bool first_fault = true;
 static int bcm5301x_abort_handler(unsigned long addr, unsigned int fsr,
 				 struct pt_regs *regs)
 {
-	if (fsr == 0x1c06 && first_fault) {
+	if ((fsr == 0x1406 || fsr == 0x1c06) && first_fault) {
 		first_fault = false;

 		/*
-		 * These faults with code 0x1c06 happens for no good reason,
-		 * possibly left over from the CFE boot loader.
+		 * These faults with codes 0x1406 (BCM4709) or 0x1c06 happens
+		 * for no good reason, possibly left over from the CFE boot
+		 * loader.
 		 */
 		pr_warn("External imprecise Data abort at addr=%#lx, fsr=%#x ignored.\n",
-		addr, fsr);
+			addr, fsr);

 		/* Returning non-zero causes fault display and panic */
 		return 0;
--- a/arch/arm/mach-bcm/board_bcm2835.c
+++ b/arch/arm/mach-bcm/board_bcm2835.c
@ -12,7 +12,6 @@
 * GNU General Public License for more details.
 */

-#include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/irqchip.h>
 #include <linux/of_address.h>
@ -22,97 +21,10 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>

-#define PM_RSTC				0x1c
-#define PM_RSTS				0x20
-#define PM_WDOG				0x24
-
-#define PM_PASSWORD			0x5a000000
-#define PM_RSTC_WRCFG_MASK		0x00000030
-#define PM_RSTC_WRCFG_FULL_RESET	0x00000020
-#define PM_RSTS_HADWRH_SET		0x00000040
-
-#define BCM2835_PERIPH_PHYS	0x20000000
-#define BCM2835_PERIPH_VIRT	0xf0000000
-#define BCM2835_PERIPH_SIZE	SZ_16M
-
-static void __iomem *wdt_regs;
-
-/*
- * The machine restart method can be called from an atomic context so we won't
- * be able to ioremap the regs then.
- */
-static void bcm2835_setup_restart(void)
-{
-	struct device_node *np = of_find_compatible_node(NULL, NULL,
-						"brcm,bcm2835-pm-wdt");
-	if (WARN(!np, "unable to setup watchdog restart"))
-		return;
-
-	wdt_regs = of_iomap(np, 0);
-	WARN(!wdt_regs, "failed to remap watchdog regs");
-}
-
-static void bcm2835_restart(enum reboot_mode mode, const char *cmd)
-{
-	u32 val;
-
-	if (!wdt_regs)
-		return;
-
-	/* use a timeout of 10 ticks (~150us) */
-	writel_relaxed(10 | PM_PASSWORD, wdt_regs + PM_WDOG);
-	val = readl_relaxed(wdt_regs + PM_RSTC);
-	val &= ~PM_RSTC_WRCFG_MASK;
-	val |= PM_PASSWORD | PM_RSTC_WRCFG_FULL_RESET;
-	writel_relaxed(val, wdt_regs + PM_RSTC);
-
-	/* No sleeping, possibly atomic. */
-	mdelay(1);
-}
-
-/*
- * We can't really power off, but if we do the normal reset scheme, and
- * indicate to bootcode.bin not to reboot, then most of the chip will be
- * powered off.
- */
-static void bcm2835_power_off(void)
-{
-	u32 val;
-
-	/*
-	 * We set the watchdog hard reset bit here to distinguish this reset
-	 * from the normal (full) reset. bootcode.bin will not reboot after a
-	 * hard reset.
-	 */
-	val = readl_relaxed(wdt_regs + PM_RSTS);
-	val &= ~PM_RSTC_WRCFG_MASK;
-	val |= PM_PASSWORD | PM_RSTS_HADWRH_SET;
-	writel_relaxed(val, wdt_regs + PM_RSTS);
-
-	/* Continue with normal reset mechanism */
-	bcm2835_restart(REBOOT_HARD, "");
-}
-
-static struct map_desc io_map __initdata = {
-	.virtual = BCM2835_PERIPH_VIRT,
-	.pfn = __phys_to_pfn(BCM2835_PERIPH_PHYS),
-	.length = BCM2835_PERIPH_SIZE,
-	.type = MT_DEVICE
-};
-
-static void __init bcm2835_map_io(void)
-{
-	iotable_init(&io_map, 1);
-}
-
 static void __init bcm2835_init(void)
 {
 	int ret;

-	bcm2835_setup_restart();
-	if (wdt_regs)
-		pm_power_off = bcm2835_power_off;
-
 	bcm2835_init_clocks();

 	ret = of_platform_populate(NULL, of_default_bus_match_table, NULL,
@ -129,9 +41,6 @@ static const char * const bcm2835_compat[] = {
 };

 DT_MACHINE_START(BCM2835, "BCM2835")
-	.map_io = bcm2835_map_io,
-	.init_irq = irqchip_init,
 	.init_machine = bcm2835_init,
-	.restart = bcm2835_restart,
 	.dt_compat = bcm2835_compat
 MACHINE_END
--- a/arch/arm/mach-ep93xx/simone.c
+++ b/arch/arm/mach-ep93xx/simone.c
@ -20,9 +20,14 @@
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
+#include <linux/mmc/host.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/mmc_spi.h>
+#include <linux/platform_data/video-ep93xx.h>
+#include <linux/platform_data/spi-ep93xx.h>
+#include <linux/gpio.h>

 #include <mach/hardware.h>
-#include <linux/platform_data/video-ep93xx.h>
 #include <mach/gpio-ep93xx.h>

 #include <asm/mach-types.h>
@ -40,6 +45,132 @@ static struct ep93xxfb_mach_info __initdata simone_fb_info = {
 	.flags		= EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING,
 };

+/*
+ * GPIO lines used for MMC card detection.
+ */
+#define MMC_CARD_DETECT_GPIO EP93XX_GPIO_LINE_EGPIO0
+
+/*
+ * Up to v1.3, the Sim.One used SFRMOUT as SD card chip select, but this goes
+ * low between multi-message command blocks. From v1.4, it uses a GPIO instead.
+ * v1.3 parts will still work, since the signal on SFRMOUT is automatic.
+ */
+#define MMC_CHIP_SELECT_GPIO EP93XX_GPIO_LINE_EGPIO1
+
+/*
+ * MMC SPI chip select GPIO handling. If you are using SFRMOUT (SFRM1) signal,
+ * you can leave these empty and pass NULL as .controller_data.
+ */
+
+static int simone_mmc_spi_setup(struct spi_device *spi)
+{
+	unsigned int gpio = MMC_CHIP_SELECT_GPIO;
+	int err;
+
+	err = gpio_request(gpio, spi->modalias);
+	if (err)
+		return err;
+
+	err = gpio_direction_output(gpio, 1);
+	if (err) {
+		gpio_free(gpio);
+		return err;
+	}
+
+	return 0;
+}
+
+static void simone_mmc_spi_cleanup(struct spi_device *spi)
+{
+	unsigned int gpio = MMC_CHIP_SELECT_GPIO;
+
+	gpio_set_value(gpio, 1);
+	gpio_direction_input(gpio);
+	gpio_free(gpio);
+}
+
+static void simone_mmc_spi_cs_control(struct spi_device *spi, int value)
+{
+	gpio_set_value(MMC_CHIP_SELECT_GPIO, value);
+}
+
+static struct ep93xx_spi_chip_ops simone_mmc_spi_ops = {
+	.setup		= simone_mmc_spi_setup,
+	.cleanup	= simone_mmc_spi_cleanup,
+	.cs_control	= simone_mmc_spi_cs_control,
+};
+
+/*
+ * MMC card detection GPIO setup.
+ */
+
+static int simone_mmc_spi_init(struct device *dev,
+	irqreturn_t (*irq_handler)(int, void *), void *mmc)
+{
+	unsigned int gpio = MMC_CARD_DETECT_GPIO;
+	int irq, err;
+
+	err = gpio_request(gpio, dev_name(dev));
+	if (err)
+		return err;
+
+	err = gpio_direction_input(gpio);
+	if (err)
+		goto fail;
+
+	irq = gpio_to_irq(gpio);
+	if (irq < 0)
+		goto fail;
+
+	err = request_irq(irq, irq_handler, IRQF_TRIGGER_FALLING,
+			  "MMC card detect", mmc);
+	if (err)
+		goto fail;
+
+	printk(KERN_INFO "%s: using irq %d for MMC card detection\n",
+	       dev_name(dev), irq);
+
+	return 0;
+fail:
+	gpio_free(gpio);
+	return err;
+}
+
+static void simone_mmc_spi_exit(struct device *dev, void *mmc)
+{
+	unsigned int gpio = MMC_CARD_DETECT_GPIO;
+
+	free_irq(gpio_to_irq(gpio), mmc);
+	gpio_free(gpio);
+}
+
+static struct mmc_spi_platform_data simone_mmc_spi_data = {
+	.init		= simone_mmc_spi_init,
+	.exit		= simone_mmc_spi_exit,
+	.detect_delay	= 500,
+	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
+};
+
+static struct spi_board_info simone_spi_devices[] __initdata = {
+	{
+		.modalias		= "mmc_spi",
+		.controller_data	= &simone_mmc_spi_ops,
+		.platform_data		= &simone_mmc_spi_data,
+		/*
+		 * We use 10 MHz even though the maximum is 3.7 MHz. The driver
+		 * will limit it automatically to max. frequency.
+		 */
+		.max_speed_hz		= 10 * 1000 * 1000,
+		.bus_num		= 0,
+		.chip_select		= 0,
+		.mode			= SPI_MODE_3,
+	},
+};
+
+static struct ep93xx_spi_info simone_spi_info __initdata = {
+	.num_chipselect	= ARRAY_SIZE(simone_spi_devices),
+};
+
 static struct i2c_gpio_platform_data __initdata simone_i2c_gpio_data = {
 	.sda_pin		= EP93XX_GPIO_LINE_EEDAT,
 	.sda_is_open_drain	= 0,
@ -74,6 +205,8 @@ static void __init simone_init_machine(void)
 	ep93xx_register_fb(&simone_fb_info);
 	ep93xx_register_i2c(&simone_i2c_gpio_data, simone_i2c_board_info,
 			    ARRAY_SIZE(simone_i2c_board_info));
+	ep93xx_register_spi(&simone_spi_info, simone_spi_devices,
+			    ARRAY_SIZE(simone_spi_devices));
 	simone_register_audio();
 }

--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@ -163,7 +163,9 @@ extern void exynos_set_delayed_reset_assertion(bool enable);

 extern void s5p_init_cpu(void __iomem *cpuid_addr);
 extern unsigned int samsung_rev(void);
-extern void __iomem *cpu_boot_reg_base(void);
+extern void exynos_core_restart(u32 core_id);
+extern int exynos_set_boot_addr(u32 core_id, unsigned long boot_addr);
+extern int exynos_get_boot_addr(u32 core_id, unsigned long *boot_addr);

 static inline void pmu_raw_writel(u32 val, u32 offset)
 {
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@ -234,7 +234,8 @@ static void __init exynos_dt_machine_init(void)
 		exynos_sysram_init();

 #if defined(CONFIG_SMP) && defined(CONFIG_ARM_EXYNOS_CPUIDLE)
-	if (of_machine_is_compatible("samsung,exynos4210"))
+	if (of_machine_is_compatible("samsung,exynos4210") ||
+	    of_machine_is_compatible("samsung,exynos3250"))
 		exynos_cpuidle.dev.platform_data = &cpuidle_coupled_exynos_data;
 #endif
 	if (of_machine_is_compatible("samsung,exynos4210") ||
--- a/arch/arm/mach-exynos/firmware.c
+++ b/arch/arm/mach-exynos/firmware.c
@ -49,6 +49,7 @@ static int exynos_do_idle(unsigned long mode)
 			     sysram_ns_base_addr + 0x24);
 		__raw_writel(EXYNOS_AFTR_MAGIC, sysram_ns_base_addr + 0x20);
 		if (soc_is_exynos3250()) {
+			flush_cache_all();
 			exynos_smc(SMC_CMD_SAVE, OP_TYPE_CORE,
 				   SMC_POWERSTATE_IDLE, 0);
 			exynos_smc(SMC_CMD_SHUTDOWN, OP_TYPE_CLUSTER,
@ -104,6 +105,22 @@ static int exynos_set_cpu_boot_addr(int cpu, unsigned long boot_addr)
 	return 0;
 }

+static int exynos_get_cpu_boot_addr(int cpu, unsigned long *boot_addr)
+{
+	void __iomem *boot_reg;
+
+	if (!sysram_ns_base_addr)
+		return -ENODEV;
+
+	boot_reg = sysram_ns_base_addr + 0x1c;
+
+	if (soc_is_exynos4412())
+		boot_reg += 4 * cpu;
+
+	*boot_addr = __raw_readl(boot_reg);
+	return 0;
+}
+
 static int exynos_cpu_suspend(unsigned long arg)
 {
 	flush_cache_all();
@ -138,6 +155,7 @@ static int exynos_resume(void)
 static const struct firmware_ops exynos_firmware_ops = {
 	.do_idle		= IS_ENABLED(CONFIG_EXYNOS_CPU_SUSPEND) ? exynos_do_idle : NULL,
 	.set_cpu_boot_addr	= exynos_set_cpu_boot_addr,
+	.get_cpu_boot_addr	= exynos_get_cpu_boot_addr,
 	.cpu_boot		= exynos_cpu_boot,
 	.suspend		= IS_ENABLED(CONFIG_PM_SLEEP) ? exynos_suspend : NULL,
 	.resume			= IS_ENABLED(CONFIG_EXYNOS_CPU_SUSPEND) ? exynos_resume : NULL,
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@ -169,7 +169,7 @@ int exynos_cluster_power_state(int cluster)
 		S5P_CORE_LOCAL_PWR_EN);
 }

-void __iomem *cpu_boot_reg_base(void)
+static void __iomem *cpu_boot_reg_base(void)
 {
 	if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_1_1)
 		return pmu_base_addr + S5P_INFORM5;
@ -195,7 +195,7 @@ static inline void __iomem *cpu_boot_reg(int cpu)
 *
 * Currently this is needed only when booting secondary CPU on Exynos3250.
 */
-static void exynos_core_restart(u32 core_id)
+void exynos_core_restart(u32 core_id)
 {
 	u32 val;

@ -210,7 +210,6 @@ static void exynos_core_restart(u32 core_id)
 	val |= S5P_CORE_WAKEUP_FROM_LOCAL_CFG;
 	pmu_raw_writel(val, EXYNOS_ARM_CORE_STATUS(core_id));

-	pr_info("CPU%u: Software reset\n", core_id);
 	pmu_raw_writel(EXYNOS_CORE_PO_RESET(core_id), EXYNOS_SWRESET);
 }

@ -248,6 +247,56 @@ static void exynos_secondary_init(unsigned int cpu)
 	spin_unlock(&boot_lock);
 }

+int exynos_set_boot_addr(u32 core_id, unsigned long boot_addr)
+{
+	int ret;
+
+	/*
+	 * Try to set boot address using firmware first
+	 * and fall back to boot register if it fails.
+	 */
+	ret = call_firmware_op(set_cpu_boot_addr, core_id, boot_addr);
+	if (ret && ret != -ENOSYS)
+		goto fail;
+	if (ret == -ENOSYS) {
+		void __iomem *boot_reg = cpu_boot_reg(core_id);
+
+		if (IS_ERR(boot_reg)) {
+			ret = PTR_ERR(boot_reg);
+			goto fail;
+		}
+		__raw_writel(boot_addr, boot_reg);
+		ret = 0;
+	}
+fail:
+	return ret;
+}
+
+int exynos_get_boot_addr(u32 core_id, unsigned long *boot_addr)
+{
+	int ret;
+
+	/*
+	 * Try to get boot address using firmware first
+	 * and fall back to boot register if it fails.
+	 */
+	ret = call_firmware_op(get_cpu_boot_addr, core_id, boot_addr);
+	if (ret && ret != -ENOSYS)
+		goto fail;
+	if (ret == -ENOSYS) {
+		void __iomem *boot_reg = cpu_boot_reg(core_id);
+
+		if (IS_ERR(boot_reg)) {
+			ret = PTR_ERR(boot_reg);
+			goto fail;
+		}
+		*boot_addr = __raw_readl(boot_reg);
+		ret = 0;
+	}
+fail:
+	return ret;
+}
+
 static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	unsigned long timeout;
@ -307,22 +356,9 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)

 		boot_addr = virt_to_phys(exynos4_secondary_startup);

-		/*
-		 * Try to set boot address using firmware first
-		 * and fall back to boot register if it fails.
-		 */
-		ret = call_firmware_op(set_cpu_boot_addr, core_id, boot_addr);
-		if (ret && ret != -ENOSYS)
+		ret = exynos_set_boot_addr(core_id, boot_addr);
+		if (ret)
 			goto fail;
-		if (ret == -ENOSYS) {
-			void __iomem *boot_reg = cpu_boot_reg(core_id);
-
-			if (IS_ERR(boot_reg)) {
-				ret = PTR_ERR(boot_reg);
-				goto fail;
-			}
-			__raw_writel(boot_addr, boot_reg);
-		}

 		call_firmware_op(cpu_boot, core_id);

@ -337,6 +373,9 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
 		udelay(10);
 	}

+	if (pen_release != -1)
+		ret = -ETIMEDOUT;
+
 	/*
 	 * now the secondary core is starting up let it run its
 	 * calibrations, then wait for it to finish
@ -407,16 +446,9 @@ static void __init exynos_smp_prepare_cpus(unsigned int max_cpus)
 		core_id = MPIDR_AFFINITY_LEVEL(mpidr, 0);
 		boot_addr = virt_to_phys(exynos4_secondary_startup);

-		ret = call_firmware_op(set_cpu_boot_addr, core_id, boot_addr);
-		if (ret && ret != -ENOSYS)
+		ret = exynos_set_boot_addr(core_id, boot_addr);
+		if (ret)
 			break;
-		if (ret == -ENOSYS) {
-			void __iomem *boot_reg = cpu_boot_reg(core_id);
-
-			if (IS_ERR(boot_reg))
-				break;
-			__raw_writel(boot_addr, boot_reg);
-		}
 	}
 }

--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@ -22,6 +22,7 @@
 #include <asm/firmware.h>
 #include <asm/smp_scu.h>
 #include <asm/suspend.h>
+#include <asm/cacheflush.h>

 #include <mach/map.h>

@ -209,6 +210,8 @@ static int exynos_cpu0_enter_aftr(void)
 		 * sequence, let's wait for one of these to happen
 		 */
 		while (exynos_cpu_power_state(1)) {
+			unsigned long boot_addr;
+
 			/*
 			 * The other cpu may skip idle and boot back
 			 * up again
@ -221,7 +224,11 @@ static int exynos_cpu0_enter_aftr(void)
 			 * boot back up again, getting stuck in the
 			 * boot rom code
 			 */
-			if (__raw_readl(cpu_boot_reg_base()) == 0)
+			ret = exynos_get_boot_addr(1, &boot_addr);
+			if (ret)
+				goto fail;
+			ret = -1;
+			if (boot_addr == 0)
 				goto abort;

 			cpu_relax();
@ -233,11 +240,14 @@ static int exynos_cpu0_enter_aftr(void)

 abort:
 	if (cpu_online(1)) {
+		unsigned long boot_addr = virt_to_phys(exynos_cpu_resume);
+
 		/*
 		 * Set the boot vector to something non-zero
 		 */
-		__raw_writel(virt_to_phys(exynos_cpu_resume),
-			     cpu_boot_reg_base());
+		ret = exynos_set_boot_addr(1, boot_addr);
+		if (ret)
+			goto fail;
 		dsb();

 		/*
@ -247,22 +257,42 @@ abort:
 		while (exynos_cpu_power_state(1) != S5P_CORE_LOCAL_PWR_EN)
 			cpu_relax();

+		if (soc_is_exynos3250()) {
+			while (!pmu_raw_readl(S5P_PMU_SPARE2) &&
+			       !atomic_read(&cpu1_wakeup))
+				cpu_relax();
+
+			if (!atomic_read(&cpu1_wakeup))
+				exynos_core_restart(1);
+		}
+
 		while (!atomic_read(&cpu1_wakeup)) {
+			smp_rmb();
+
 			/*
 			 * Poke cpu1 out of the boot rom
 			 */
-			__raw_writel(virt_to_phys(exynos_cpu_resume),
-				     cpu_boot_reg_base());

-			arch_send_wakeup_ipi_mask(cpumask_of(1));
+			ret = exynos_set_boot_addr(1, boot_addr);
+			if (ret)
+				goto fail;
+
+			call_firmware_op(cpu_boot, 1);
+
+			if (soc_is_exynos3250())
+				dsb_sev();
+			else
+				arch_send_wakeup_ipi_mask(cpumask_of(1));
 		}
 	}
-
+fail:
 	return ret;
 }

 static int exynos_wfi_finisher(unsigned long flags)
 {
+	if (soc_is_exynos3250())
+		flush_cache_all();
 	cpu_do_idle();

 	return -1;
@ -283,6 +313,9 @@ static int exynos_cpu1_powerdown(void)
 	 */
 	exynos_cpu_power_down(1);

+	if (soc_is_exynos3250())
+		pmu_raw_writel(0, S5P_PMU_SPARE2);
+
 	ret = cpu_suspend(0, exynos_wfi_finisher);

 	cpu_pm_exit();
@ -299,7 +332,9 @@ cpu1_aborted:

 static void exynos_pre_enter_aftr(void)
 {
-	__raw_writel(virt_to_phys(exynos_cpu_resume), cpu_boot_reg_base());
+	unsigned long boot_addr = virt_to_phys(exynos_cpu_resume);
+
+	(void)exynos_set_boot_addr(1, boot_addr);
 }

 static void exynos_post_enter_aftr(void)
--- a/arch/arm/mach-exynos/pm_domains.c
+++ b/arch/arm/mach-exynos/pm_domains.c
@ -62,6 +62,7 @@ static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on)
 		for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) {
 			if (IS_ERR(pd->clk[i]))
 				break;
+			pd->pclk[i] = clk_get_parent(pd->clk[i]);
 			if (clk_set_parent(pd->clk[i], pd->oscclk))
 				pr_err("%s: error setting oscclk as parent to clock %d\n",
 						pd->name, i);
@ -90,6 +91,9 @@ static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on)
 		for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) {
 			if (IS_ERR(pd->clk[i]))
 				break;
+
+			if (IS_ERR(pd->clk[i]))
+				continue; /* Skip on first power up */
 			if (clk_set_parent(pd->clk[i], pd->pclk[i]))
 				pr_err("%s: error setting parent to clock%d\n",
 						pd->name, i);
@ -117,27 +121,37 @@ static int exynos_pd_power_off(struct generic_pm_domain *domain)

 static __init int exynos4_pm_init_power_domain(void)
 {
-	struct platform_device *pdev;
 	struct device_node *np;

 	for_each_compatible_node(np, NULL, "samsung,exynos4210-pd") {
 		struct exynos_pm_domain *pd;
 		int on, i;
-		struct device *dev;
-
-		pdev = of_find_device_by_node(np);
-		dev = &pdev->dev;

 		pd = kzalloc(sizeof(*pd), GFP_KERNEL);
 		if (!pd) {
 			pr_err("%s: failed to allocate memory for domain\n",
 					__func__);
+			of_node_put(np);
+			return -ENOMEM;
+		}
+		pd->pd.name = kstrdup_const(strrchr(np->full_name, '/') + 1,
+					    GFP_KERNEL);
+		if (!pd->pd.name) {
+			kfree(pd);
+			of_node_put(np);
 			return -ENOMEM;
 		}

-		pd->pd.name = kstrdup(dev_name(dev), GFP_KERNEL);
 		pd->name = pd->pd.name;
 		pd->base = of_iomap(np, 0);
+		if (!pd->base) {
+			pr_warn("%s: failed to map memory\n", __func__);
+			kfree(pd->pd.name);
+			kfree(pd);
+			of_node_put(np);
+			continue;
+		}
+
 		pd->pd.power_off = exynos_pd_power_off;
 		pd->pd.power_on = exynos_pd_power_on;

@ -145,12 +159,12 @@ static __init int exynos4_pm_init_power_domain(void)
 			char clk_name[8];

 			snprintf(clk_name, sizeof(clk_name), "asb%d", i);
-			pd->asb_clk[i] = clk_get(dev, clk_name);
+			pd->asb_clk[i] = of_clk_get_by_name(np, clk_name);
 			if (IS_ERR(pd->asb_clk[i]))
 				break;
 		}

-		pd->oscclk = clk_get(dev, "oscclk");
+		pd->oscclk = of_clk_get_by_name(np, "oscclk");
 		if (IS_ERR(pd->oscclk))
 			goto no_clk;

@ -158,16 +172,14 @@ static __init int exynos4_pm_init_power_domain(void)
 			char clk_name[8];

 			snprintf(clk_name, sizeof(clk_name), "clk%d", i);
-			pd->clk[i] = clk_get(dev, clk_name);
+			pd->clk[i] = of_clk_get_by_name(np, clk_name);
 			if (IS_ERR(pd->clk[i]))
 				break;
-			snprintf(clk_name, sizeof(clk_name), "pclk%d", i);
-			pd->pclk[i] = clk_get(dev, clk_name);
-			if (IS_ERR(pd->pclk[i])) {
-				clk_put(pd->clk[i]);
-				pd->clk[i] = ERR_PTR(-EINVAL);
-				break;
-			}
+			/*
+			 * Skip setting parent on first power up.
+			 * The parent at this time may not be useful at all.
+			 */
+			pd->pclk[i] = ERR_PTR(-EINVAL);
 		}

 		if (IS_ERR(pd->clk[0]))
@ -189,15 +201,15 @@ no_clk:
 		args.args_count = 0;
 		child_domain = of_genpd_get_from_provider(&args);
 		if (IS_ERR(child_domain))
-			continue;
+			goto next_pd;

 		if (of_parse_phandle_with_args(np, "power-domains",
 					 "#power-domain-cells", 0, &args) != 0)
-			continue;
+			goto next_pd;

 		parent_domain = of_genpd_get_from_provider(&args);
 		if (IS_ERR(parent_domain))
-			continue;
+			goto next_pd;

 		if (pm_genpd_add_subdomain(parent_domain, child_domain))
 			pr_warn("%s failed to add subdomain: %s\n",
@ -205,9 +217,10 @@ no_clk:
 		else
 			pr_info("%s has as child subdomain: %s.\n",
 				parent_domain->name, child_domain->name);
+next_pd:
 		of_node_put(np);
 	}

 	return 0;
 }
-arch_initcall(exynos4_pm_init_power_domain);
+core_initcall(exynos4_pm_init_power_domain);
--- a/arch/arm/mach-exynos/pmu.c
+++ b/arch/arm/mach-exynos/pmu.c
@ -681,7 +681,7 @@ static unsigned int const exynos5420_list_disable_pmu_reg[] = {
 	EXYNOS5420_CMU_RESET_FSYS_SYS_PWR_REG,
 };

-static void exynos5_power_off(void)
+static void exynos_power_off(void)
 {
 	unsigned int tmp;

@ -872,8 +872,6 @@ static void exynos5420_pmu_init(void)
 			EXYNOS5420_ARM_INTR_SPREAD_USE_STANDBYWFI);

 	pmu_raw_writel(0x1, EXYNOS5420_UP_SCHEDULER);
-
-	pm_power_off = exynos5_power_off;
 	pr_info("EXYNOS5420 PMU initialized\n");
 }

@ -984,6 +982,8 @@ static int exynos_pmu_probe(struct platform_device *pdev)
 	if (ret)
 		dev_warn(dev, "can't register restart handler err=%d\n", ret);

+	pm_power_off = exynos_power_off;
+
 	dev_dbg(dev, "Exynos PMU Driver probe done\n");
 	return 0;
 }
--- a/arch/arm/mach-exynos/suspend.c
+++ b/arch/arm/mach-exynos/suspend.c
@ -223,7 +223,7 @@ static int exynos_pmu_domain_alloc(struct irq_domain *domain,
 	return irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, &parent_args);
 }

-static struct irq_domain_ops exynos_pmu_domain_ops = {
+static const struct irq_domain_ops exynos_pmu_domain_ops = {
 	.xlate	= exynos_pmu_domain_xlate,
 	.alloc	= exynos_pmu_domain_alloc,
 	.free	= irq_domain_free_irqs_common,
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@ -1,8 +1,8 @@
 menuconfig ARCH_MXC
-	bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7
+	bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 || ARM_SINGLE_ARMV7M
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_CPU_SUSPEND if PM
-	select CLKSRC_MMIO
+	select CLKSRC_IMX_GPT
 	select GENERIC_IRQ_CHIP
 	select PINCTRL
 	select PM_OPP if PM
@ -462,10 +462,10 @@ config MACH_VPR200

 endif

-if ARCH_MULTI_V5
-
 comment "Device tree only"

+if ARCH_MULTI_V5
+
 config SOC_IMX25
 	bool "i.MX25 support"
 	select ARCH_MXC_IOMUX_V3
@ -478,7 +478,7 @@ endif

 if ARCH_MULTI_V7

-comment "Device tree only"
+comment "Cortex-A platforms"

 config SOC_IMX5
 	bool
@ -548,10 +548,33 @@ config SOC_IMX6SX
 	help
 	  This enables support for Freescale i.MX6 SoloX processor.

+config SOC_IMX7D
+	bool "i.MX7 Dual support"
+	select PINCTRL_IMX7D
+	select ARM_GIC
+	select HAVE_IMX_ANATOP
+	select HAVE_IMX_MMDC
+	help
+		This enables support for Freescale i.MX7 Dual processor.
+
+config SOC_LS1021A
+	bool "Freescale LS1021A support"
+	select ARM_GIC
+	select HAVE_ARM_ARCH_TIMER
+	select PCI_DOMAINS if PCI
+	select ZONE_DMA if ARM_LPAE
+	help
+	  This enables support for Freescale LS1021A processor.
+
+endif
+
+comment "Cortex-A/Cortex-M asymmetric multiprocessing platforms"
+
+if ARCH_MULTI_V7 || ARM_SINGLE_ARMV7M
+
 config SOC_VF610
 	bool "Vybrid Family VF610 support"
-	select IRQ_DOMAIN_HIERARCHY
-	select ARM_GIC
+	select ARM_GIC if ARCH_MULTI_V7
 	select PINCTRL_VF610
 	select PL310_ERRATA_769419 if CACHE_L2X0
 	select SMP_ON_UP if SMP
@ -565,7 +588,7 @@ choice
 	default VF_USE_ARM_GLOBAL_TIMER

 	config VF_USE_ARM_GLOBAL_TIMER
-		bool "Use ARM Global Timer"
+		bool "Use ARM Global Timer" if ARCH_MULTI_V7
 		select ARM_GLOBAL_TIMER
 		select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
 		help
@ -579,16 +602,6 @@ choice

 endchoice

-config SOC_LS1021A
-	bool "Freescale LS1021A support"
-	select ARM_GIC
-	select HAVE_ARM_ARCH_TIMER
-	select PCI_DOMAINS if PCI
-	select ZONE_DMA if ARM_LPAE
-
-	help
-	  This enables support for Freescale LS1021A processor.
-
 endif

 source "arch/arm/mach-imx/devices/Kconfig"
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@ -1,23 +1,18 @@
-obj-y := time.o cpu.o system.o irq-common.o
+obj-y := cpu.o system.o irq-common.o

-obj-$(CONFIG_SOC_IMX1) += clk-imx1.o mm-imx1.o
-obj-$(CONFIG_SOC_IMX21) += clk-imx21.o mm-imx21.o
+obj-$(CONFIG_SOC_IMX1) += mm-imx1.o
+obj-$(CONFIG_SOC_IMX21) += mm-imx21.o

-obj-$(CONFIG_SOC_IMX25) += clk-imx25.o cpu-imx25.o mach-imx25.o
+obj-$(CONFIG_SOC_IMX25) += cpu-imx25.o mach-imx25.o

 obj-$(CONFIG_SOC_IMX27) += cpu-imx27.o pm-imx27.o
-obj-$(CONFIG_SOC_IMX27) += clk-imx27.o mm-imx27.o ehci-imx27.o
+obj-$(CONFIG_SOC_IMX27) += mm-imx27.o ehci-imx27.o

-obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clk-imx31.o iomux-imx31.o ehci-imx31.o pm-imx3.o
-obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clk-imx35.o ehci-imx35.o pm-imx3.o
+obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o iomux-imx31.o ehci-imx31.o pm-imx3.o
+obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o ehci-imx35.o pm-imx3.o

 imx5-pm-$(CONFIG_PM) += pm-imx5.o
-obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o clk-imx51-imx53.o clk-cpu.o $(imx5-pm-y)
-
-obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \
-			    clk-pfd.o clk-busy.o clk.o \
-			    clk-fixup-div.o clk-fixup-mux.o \
-			    clk-gate-exclusive.o
+obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o $(imx5-pm-y)

 obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o
 obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
@ -85,13 +80,15 @@ AFLAGS_headsmp.o :=-Wa,-march=armv7-a
 obj-$(CONFIG_SMP) += headsmp.o platsmp.o
 obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
 endif
-obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o
-obj-$(CONFIG_SOC_IMX6SL) += clk-imx6sl.o mach-imx6sl.o
-obj-$(CONFIG_SOC_IMX6SX) += clk-imx6sx.o mach-imx6sx.o
+obj-$(CONFIG_SOC_IMX6Q) += mach-imx6q.o
+obj-$(CONFIG_SOC_IMX6SL) += mach-imx6sl.o
+obj-$(CONFIG_SOC_IMX6SX) += mach-imx6sx.o
+obj-$(CONFIG_SOC_IMX7D) += mach-imx7d.o

 ifeq ($(CONFIG_SUSPEND),y)
 AFLAGS_suspend-imx6.o :=-Wa,-march=armv7-a
 obj-$(CONFIG_SOC_IMX6) += suspend-imx6.o
+obj-$(CONFIG_SOC_IMX53) += suspend-imx53.o
 endif
 obj-$(CONFIG_SOC_IMX6) += pm-imx6.o

@ -99,7 +96,7 @@ obj-$(CONFIG_SOC_IMX50) += mach-imx50.o
 obj-$(CONFIG_SOC_IMX51) += mach-imx51.o
 obj-$(CONFIG_SOC_IMX53) += mach-imx53.o

-obj-$(CONFIG_SOC_VF610) += clk-vf610.o mach-vf610.o
+obj-$(CONFIG_SOC_VF610) += mach-vf610.o

 obj-$(CONFIG_SOC_LS1021A) += mach-ls1021a.o

--- a/arch/arm/mach-imx/Makefile.boot
+++ b/arch/arm/mach-imx/Makefile.boot
--- a/arch/arm/mach-imx/anatop.c
+++ b/arch/arm/mach-imx/anatop.c
@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ * Copyright (C) 2013-2015 Freescale Semiconductor, Inc.
 *
 * The code contained herein is licensed under the GNU General Public
 * License. You may obtain a copy of the GNU General Public License
@ -28,6 +28,7 @@
 #define ANADIG_USB2_CHRG_DETECT	0x210
 #define ANADIG_DIGPROG		0x260
 #define ANADIG_DIGPROG_IMX6SL	0x280
+#define ANADIG_DIGPROG_IMX7D	0x800

 #define BM_ANADIG_REG_2P5_ENABLE_WEAK_LINREG	0x40000
 #define BM_ANADIG_REG_2P5_ENABLE_PULLDOWN	0x8
@ -121,6 +122,8 @@ void __init imx_init_revision_from_anatop(void)
 	WARN_ON(!anatop_base);
 	if (of_device_is_compatible(np, "fsl,imx6sl-anatop"))
 		offset = ANADIG_DIGPROG_IMX6SL;
+	if (of_device_is_compatible(np, "fsl,imx7d-anatop"))
+		offset = ANADIG_DIGPROG_IMX7D;
 	digprog = readl_relaxed(anatop_base + offset);
 	iounmap(anatop_base);

--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@ -44,7 +44,6 @@ void imx27_soc_init(void);
 void imx31_soc_init(void);
 void imx35_soc_init(void);
 void epit_timer_init(void __iomem *base, int irq);
-void mxc_timer_init(void __iomem *, int);
 int mx1_clocks_init(unsigned long fref);
 int mx21_clocks_init(unsigned long lref, unsigned long fref);
 int mx27_clocks_init(unsigned long fref);
@ -56,13 +55,10 @@ struct platform_device *mxc_register_gpio(char *name, int id,
 void mxc_set_cpu_type(unsigned int type);
 void mxc_restart(enum reboot_mode, const char *);
 void mxc_arch_reset_init(void __iomem *);
-int mx51_revision(void);
-int mx53_revision(void);
 void imx_set_aips(void __iomem *);
 void imx_aips_allow_unprivileged_access(const char *compat);
 int mxc_device_init(void);
 void imx_set_soc_revision(unsigned int rev);
-unsigned int imx_get_soc_revision(void);
 void imx_init_revision_from_anatop(void);
 struct device *imx_soc_device_init(void);
 void imx6_enable_rbc(bool enable);
@ -87,7 +83,6 @@ enum mx3_cpu_pwr_mode {
 };

 void mx3_cpu_lp_set(enum mx3_cpu_pwr_mode mode);
-void imx_print_silicon_rev(const char *cpu, int srev);

 void imx_enable_cpu(int cpu, bool enable);
 void imx_set_cpu_jump(int cpu, void *jump_addr);
@ -111,7 +106,7 @@ void imx_gpc_hwirq_unmask(unsigned int hwirq);
 void imx_anatop_init(void);
 void imx_anatop_pre_suspend(void);
 void imx_anatop_post_resume(void);
-int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
+int imx6_set_lpm(enum mxc_cpu_pwr_mode mode);
 void imx6q_set_int_mem_clk_lpm(bool enable);
 void imx6sl_set_wait_clk(bool enter);
 int imx_mmdc_get_ddr_type(void);
@ -121,26 +116,28 @@ int imx_cpu_kill(unsigned int cpu);

 #ifdef CONFIG_SUSPEND
 void v7_cpu_resume(void);
+void imx53_suspend(void __iomem *ocram_vbase);
+extern const u32 imx53_suspend_sz;
 void imx6_suspend(void __iomem *ocram_vbase);
 #else
 static inline void v7_cpu_resume(void) {}
+static inline void imx53_suspend(void __iomem *ocram_vbase) {}
+static const u32 imx53_suspend_sz;
 static inline void imx6_suspend(void __iomem *ocram_vbase) {}
 #endif

+void imx6_pm_ccm_init(const char *ccm_compat);
 void imx6q_pm_init(void);
 void imx6dl_pm_init(void);
 void imx6sl_pm_init(void);
 void imx6sx_pm_init(void);
-void imx6q_pm_set_ccm_base(void __iomem *base);

 #ifdef CONFIG_PM
 void imx51_pm_init(void);
 void imx53_pm_init(void);
-void imx5_pm_set_ccm_base(void __iomem *base);
 #else
 static inline void imx51_pm_init(void) {}
 static inline void imx53_pm_init(void) {}
-static inline void imx5_pm_set_ccm_base(void __iomem *base) {}
 #endif

 #ifdef CONFIG_NEON
--- a/arch/arm/mach-imx/cpu.c
+++ b/arch/arm/mach-imx/cpu.c
@ -130,6 +130,9 @@ struct device * __init imx_soc_device_init(void)
 	case MXC_CPU_IMX6Q:
 		soc_id = "i.MX6Q";
 		break;
+	case MXC_CPU_IMX7D:
+		soc_id = "i.MX7D";
+		break;
 	default:
 		soc_id = "Unknown";
 	}
--- a/arch/arm/mach-imx/cpuidle-imx6q.c
+++ b/arch/arm/mach-imx/cpuidle-imx6q.c
@ -27,9 +27,9 @@ static int imx6q_enter_wait(struct cpuidle_device *dev,
 		 */
 		if (!spin_trylock(&master_lock))
 			goto idle;
-		imx6q_set_lpm(WAIT_UNCLOCKED);
+		imx6_set_lpm(WAIT_UNCLOCKED);
 		cpu_do_idle();
-		imx6q_set_lpm(WAIT_CLOCKED);
+		imx6_set_lpm(WAIT_CLOCKED);
 		spin_unlock(&master_lock);
 		goto done;
 	}
--- a/arch/arm/mach-imx/cpuidle-imx6sl.c
+++ b/arch/arm/mach-imx/cpuidle-imx6sl.c
@ -16,7 +16,7 @@
 static int imx6sl_enter_wait(struct cpuidle_device *dev,
 			    struct cpuidle_driver *drv, int index)
 {
-	imx6q_set_lpm(WAIT_UNCLOCKED);
+	imx6_set_lpm(WAIT_UNCLOCKED);
 	/*
 	 * Software workaround for ERR005311, see function
 	 * description for details.
@ -24,7 +24,7 @@ static int imx6sl_enter_wait(struct cpuidle_device *dev,
 	imx6sl_set_wait_clk(true);
 	cpu_do_idle();
 	imx6sl_set_wait_clk(false);
-	imx6q_set_lpm(WAIT_CLOCKED);
+	imx6_set_lpm(WAIT_CLOCKED);

 	return index;
 }
--- a/arch/arm/mach-imx/cpuidle-imx6sx.c
+++ b/arch/arm/mach-imx/cpuidle-imx6sx.c
@ -25,7 +25,7 @@ static int imx6sx_idle_finish(unsigned long val)
 static int imx6sx_enter_wait(struct cpuidle_device *dev,
 			    struct cpuidle_driver *drv, int index)
 {
-	imx6q_set_lpm(WAIT_UNCLOCKED);
+	imx6_set_lpm(WAIT_UNCLOCKED);

 	switch (index) {
 	case 1:
@ -50,7 +50,7 @@ static int imx6sx_enter_wait(struct cpuidle_device *dev,
 		break;
 	}

-	imx6q_set_lpm(WAIT_CLOCKED);
+	imx6_set_lpm(WAIT_CLOCKED);

 	return index;
 }
--- a/arch/arm/mach-imx/gpc.c
+++ b/arch/arm/mach-imx/gpc.c
@ -227,7 +227,7 @@ static int imx_gpc_domain_alloc(struct irq_domain *domain,
 	return irq_domain_alloc_irqs_parent(domain, irq, nr_irqs, &parent_args);
 }

-static struct irq_domain_ops imx_gpc_domain_ops = {
+static const struct irq_domain_ops imx_gpc_domain_ops = {
 	.xlate	= imx_gpc_domain_xlate,
 	.alloc	= imx_gpc_domain_alloc,
 	.free	= irq_domain_free_irqs_common,
--- a/arch/arm/mach-imx/hardware.h
+++ b/arch/arm/mach-imx/hardware.h
@ -22,6 +22,7 @@

 #ifndef __ASSEMBLY__
 #include <asm/io.h>
+#include <soc/imx/revision.h>
 #endif
 #include <asm/sizes.h>

--- a/arch/arm/mach-imx/iomux-imx31.c
+++ b/arch/arm/mach-imx/iomux-imx31.c
@ -40,7 +40,7 @@ static DEFINE_SPINLOCK(gpio_mux_lock);

 #define IOMUX_REG_MASK (IOMUX_PADNUM_MASK & ~0x3)

-static unsigned long mxc_pin_alloc_map[NB_PORTS * 32 / BITS_PER_LONG];
+static DECLARE_BITMAP(mxc_pin_alloc_map, NB_PORTS * 32);
 /*
 * set the mode for a IOMUX pin.
 */
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@ -393,6 +393,7 @@ static void __init imx6q_init_irq(void)
 	imx_init_l2cache();
 	imx_src_init();
 	irqchip_init();
+	imx6_pm_ccm_init("fsl,imx6q-ccm");
 }

 static const char * const imx6q_dt_compat[] __initconst = {
--- a/arch/arm/mach-imx/mach-imx6sl.c
+++ b/arch/arm/mach-imx/mach-imx6sl.c
@ -66,6 +66,7 @@ static void __init imx6sl_init_irq(void)
 	imx_init_l2cache();
 	imx_src_init();
 	irqchip_init();
+	imx6_pm_ccm_init("fsl,imx6sl-ccm");
 }

 static const char * const imx6sl_dt_compat[] __initconst = {
--- a/arch/arm/mach-imx/mach-imx6sx.c
+++ b/arch/arm/mach-imx/mach-imx6sx.c
@ -86,6 +86,7 @@ static void __init imx6sx_init_irq(void)
 	imx_init_l2cache();
 	imx_src_init();
 	irqchip_init();
+	imx6_pm_ccm_init("fsl,imx6sx-ccm");
 }

 static void __init imx6sx_init_late(void)
--- a/arch/arm/mach-imx/mach-imx7d.c
+++ b/arch/arm/mach-imx/mach-imx7d.c
@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/irqchip.h>
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include "common.h"
+
+static void __init imx7d_init_machine(void)
+{
+	struct device *parent;
+
+	parent = imx_soc_device_init();
+	if (parent == NULL)
+		pr_warn("failed to initialize soc device\n");
+
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+	imx_anatop_init();
+}
+
+static void __init imx7d_init_irq(void)
+{
+	imx_init_revision_from_anatop();
+	imx_src_init();
+	irqchip_init();
+}
+
+static const char *imx7d_dt_compat[] __initconst = {
+	"fsl,imx7d",
+	NULL,
+};
+
+DT_MACHINE_START(IMX7D, "Freescale i.MX7 Dual (Device Tree)")
+	.init_irq	= imx7d_init_irq,
+	.init_machine	= imx7d_init_machine,
+	.dt_compat	= imx7d_dt_compat,
+MACHINE_END
--- a/arch/arm/mach-imx/mach-vf610.c
+++ b/arch/arm/mach-imx/mach-vf610.c
@ -17,6 +17,7 @@ static const char * const vf610_dt_compat[] __initconst = {
 	"fsl,vf510",
 	"fsl,vf600",
 	"fsl,vf610",
+	"fsl,vf610m4",
 	NULL,
 };

--- a/arch/arm/mach-imx/mmdc.c
+++ b/arch/arm/mach-imx/mmdc.c
@ -17,6 +17,8 @@
 #include <linux/of_address.h>
 #include <linux/of_device.h>

+#include "common.h"
+
 #define MMDC_MAPSR		0x404
 #define BP_MMDC_MAPSR_PSD	0
 #define BP_MMDC_MAPSR_PSS	4
--- a/arch/arm/mach-imx/mx27.h
+++ b/arch/arm/mach-imx/mx27.h
@ -231,8 +231,4 @@
 #define MX27_DMA_REQ_SDHC3	36
 #define MX27_DMA_REQ_NFC	37

-#ifndef __ASSEMBLY__
-extern int mx27_revision(void);
-#endif
-
 #endif /* ifndef __MACH_MX27_H__ */
--- a/arch/arm/mach-imx/mx3x.h
+++ b/arch/arm/mach-imx/mx3x.h
@ -185,11 +185,4 @@

 #define MX3x_PROD_SIGNATURE		0x1	/* For MX31 */

-/* Mandatory defines used globally */
-
-#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
-extern int mx35_revision(void);
-extern int mx31_revision(void);
-#endif
-
 #endif /* ifndef __MACH_MX3x_H__ */
--- a/arch/arm/mach-imx/mxc.h
+++ b/arch/arm/mach-imx/mxc.h
@ -1,5 +1,5 @@
 /*
- * Copyright 2004-2007, 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2004-2007, 2010-2015 Freescale Semiconductor, Inc.
 * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
 *
 * This program is free software; you can redistribute it and/or
@ -38,22 +38,7 @@
 #define MXC_CPU_IMX6DL		0x61
 #define MXC_CPU_IMX6SX		0x62
 #define MXC_CPU_IMX6Q		0x63
-
-#define IMX_CHIP_REVISION_1_0		0x10
-#define IMX_CHIP_REVISION_1_1		0x11
-#define IMX_CHIP_REVISION_1_2		0x12
-#define IMX_CHIP_REVISION_1_3		0x13
-#define IMX_CHIP_REVISION_1_4		0x14
-#define IMX_CHIP_REVISION_1_5		0x15
-#define IMX_CHIP_REVISION_2_0		0x20
-#define IMX_CHIP_REVISION_2_1		0x21
-#define IMX_CHIP_REVISION_2_2		0x22
-#define IMX_CHIP_REVISION_2_3		0x23
-#define IMX_CHIP_REVISION_3_0		0x30
-#define IMX_CHIP_REVISION_3_1		0x31
-#define IMX_CHIP_REVISION_3_2		0x32
-#define IMX_CHIP_REVISION_3_3		0x33
-#define IMX_CHIP_REVISION_UNKNOWN	0xff
+#define MXC_CPU_IMX7D		0x72

 #define IMX_DDR_TYPE_LPDDR2		1

@ -185,6 +170,11 @@ static inline bool cpu_is_imx6q(void)
 	return __mxc_cpu_type == MXC_CPU_IMX6Q;
 }

+static inline bool cpu_is_imx7d(void)
+{
+	return __mxc_cpu_type == MXC_CPU_IMX7D;
+}
+
 struct cpu_op {
 	u32 cpu_rate;
 };
--- a/arch/arm/mach-imx/pm-imx5.c
+++ b/arch/arm/mach-imx/pm-imx5.c
@ -13,7 +13,14 @@
 #include <linux/io.h>
 #include <linux/err.h>
 #include <linux/export.h>
+
+#include <linux/genalloc.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+
 #include <asm/cacheflush.h>
+#include <asm/fncpy.h>
 #include <asm/system_misc.h>
 #include <asm/tlbflush.h>

@ -49,29 +56,91 @@
 */
 #define IMX5_DEFAULT_CPU_IDLE_STATE WAIT_UNCLOCKED_POWER_OFF

+struct imx5_suspend_io_state {
+	u32	offset;
+	u32	clear;
+	u32	set;
+	u32	saved_value;
+};
+
 struct imx5_pm_data {
+	phys_addr_t ccm_addr;
 	phys_addr_t cortex_addr;
 	phys_addr_t gpc_addr;
+	phys_addr_t m4if_addr;
+	phys_addr_t iomuxc_addr;
+	void (*suspend_asm)(void __iomem *ocram_vbase);
+	const u32 *suspend_asm_sz;
+	const struct imx5_suspend_io_state *suspend_io_config;
+	int suspend_io_count;
+};
+
+static const struct imx5_suspend_io_state imx53_suspend_io_config[] = {
+#define MX53_DSE_HIGHZ_MASK (0x7 << 19)
+	{.offset = 0x584, .clear = MX53_DSE_HIGHZ_MASK}, /* DQM0 */
+	{.offset = 0x594, .clear = MX53_DSE_HIGHZ_MASK}, /* DQM1 */
+	{.offset = 0x560, .clear = MX53_DSE_HIGHZ_MASK}, /* DQM2 */
+	{.offset = 0x554, .clear = MX53_DSE_HIGHZ_MASK}, /* DQM3 */
+	{.offset = 0x574, .clear = MX53_DSE_HIGHZ_MASK}, /* CAS */
+	{.offset = 0x588, .clear = MX53_DSE_HIGHZ_MASK}, /* RAS */
+	{.offset = 0x578, .clear = MX53_DSE_HIGHZ_MASK}, /* SDCLK_0 */
+	{.offset = 0x570, .clear = MX53_DSE_HIGHZ_MASK}, /* SDCLK_1 */
+
+	{.offset = 0x580, .clear = MX53_DSE_HIGHZ_MASK}, /* SDODT0 */
+	{.offset = 0x564, .clear = MX53_DSE_HIGHZ_MASK}, /* SDODT1 */
+	{.offset = 0x57c, .clear = MX53_DSE_HIGHZ_MASK}, /* SDQS0 */
+	{.offset = 0x590, .clear = MX53_DSE_HIGHZ_MASK}, /* SDQS1 */
+	{.offset = 0x568, .clear = MX53_DSE_HIGHZ_MASK}, /* SDQS2 */
+	{.offset = 0x558, .clear = MX53_DSE_HIGHZ_MASK}, /* SDSQ3 */
+	{.offset = 0x6f0, .clear = MX53_DSE_HIGHZ_MASK}, /* GRP_ADDS */
+	{.offset = 0x718, .clear = MX53_DSE_HIGHZ_MASK}, /* GRP_BODS */
+	{.offset = 0x71c, .clear = MX53_DSE_HIGHZ_MASK}, /* GRP_B1DS */
+	{.offset = 0x728, .clear = MX53_DSE_HIGHZ_MASK}, /* GRP_B2DS */
+	{.offset = 0x72c, .clear = MX53_DSE_HIGHZ_MASK}, /* GRP_B3DS */
+
+	/* Controls the CKE signal which is required to leave self refresh */
+	{.offset = 0x720, .clear = MX53_DSE_HIGHZ_MASK, .set = 1 << 19}, /* CTLDS */
 };

 static const struct imx5_pm_data imx51_pm_data __initconst = {
+	.ccm_addr = 0x73fd4000,
 	.cortex_addr = 0x83fa0000,
 	.gpc_addr = 0x73fd8000,
 };

 static const struct imx5_pm_data imx53_pm_data __initconst = {
+	.ccm_addr = 0x53fd4000,
 	.cortex_addr = 0x63fa0000,
 	.gpc_addr = 0x53fd8000,
+	.m4if_addr = 0x63fd8000,
+	.iomuxc_addr = 0x53fa8000,
+	.suspend_asm = &imx53_suspend,
+	.suspend_asm_sz = &imx53_suspend_sz,
+	.suspend_io_config = imx53_suspend_io_config,
+	.suspend_io_count = ARRAY_SIZE(imx53_suspend_io_config),
 };

+#define MX5_MAX_SUSPEND_IOSTATE ARRAY_SIZE(imx53_suspend_io_config)
+
+/*
+ * This structure is for passing necessary data for low level ocram
+ * suspend code(arch/arm/mach-imx/suspend-imx53.S), if this struct
+ * definition is changed, the offset definition in that file
+ * must be also changed accordingly otherwise, the suspend to ocram
+ * function will be broken!
+ */
+struct imx5_cpu_suspend_info {
+	void __iomem	*m4if_base;
+	void __iomem	*iomuxc_base;
+	u32		io_count;
+	struct imx5_suspend_io_state io_state[MX5_MAX_SUSPEND_IOSTATE];
+} __aligned(8);
+
 static void __iomem *ccm_base;
 static void __iomem *cortex_base;
 static void __iomem *gpc_base;
-
-void __init imx5_pm_set_ccm_base(void __iomem *base)
-{
-	ccm_base = base;
-}
+static void __iomem *suspend_ocram_base;
+static void (*imx5_suspend_in_ocram_fn)(void __iomem *ocram_vbase);

 /*
 * set cpu low power mode before WFI instruction. This function is called
@ -161,8 +230,15 @@ static int mx5_suspend_enter(suspend_state_t state)
 		/*clear the EMPGC0/1 bits */
 		__raw_writel(0, gpc_base + MXC_SRPG_EMPGC0_SRPGCR);
 		__raw_writel(0, gpc_base + MXC_SRPG_EMPGC1_SRPGCR);
+
+		if (imx5_suspend_in_ocram_fn)
+			imx5_suspend_in_ocram_fn(suspend_ocram_base);
+		else
+			cpu_do_idle();
+
+	} else {
+		cpu_do_idle();
 	}
-	cpu_do_idle();

 	/* return registers to default idle state */
 	mx5_cpu_lp_set(IMX5_DEFAULT_CPU_IDLE_STATE);
@ -194,6 +270,111 @@ static void imx5_pm_idle(void)
 	imx5_cpu_do_idle();
 }

+static int __init imx_suspend_alloc_ocram(
+				size_t size,
+				void __iomem **virt_out,
+				phys_addr_t *phys_out)
+{
+	struct device_node *node;
+	struct platform_device *pdev;
+	struct gen_pool *ocram_pool;
+	unsigned long ocram_base;
+	void __iomem *virt;
+	phys_addr_t phys;
+	int ret = 0;
+
+	/* Copied from imx6: TODO factorize */
+	node = of_find_compatible_node(NULL, NULL, "mmio-sram");
+	if (!node) {
+		pr_warn("%s: failed to find ocram node!\n", __func__);
+		return -ENODEV;
+	}
+
+	pdev = of_find_device_by_node(node);
+	if (!pdev) {
+		pr_warn("%s: failed to find ocram device!\n", __func__);
+		ret = -ENODEV;
+		goto put_node;
+	}
+
+	ocram_pool = dev_get_gen_pool(&pdev->dev);
+	if (!ocram_pool) {
+		pr_warn("%s: ocram pool unavailable!\n", __func__);
+		ret = -ENODEV;
+		goto put_node;
+	}
+
+	ocram_base = gen_pool_alloc(ocram_pool, size);
+	if (!ocram_base) {
+		pr_warn("%s: unable to alloc ocram!\n", __func__);
+		ret = -ENOMEM;
+		goto put_node;
+	}
+
+	phys = gen_pool_virt_to_phys(ocram_pool, ocram_base);
+	virt = __arm_ioremap_exec(phys, size, false);
+	if (phys_out)
+		*phys_out = phys;
+	if (virt_out)
+		*virt_out = virt;
+
+put_node:
+	of_node_put(node);
+
+	return ret;
+}
+
+static int __init imx5_suspend_init(const struct imx5_pm_data *soc_data)
+{
+	struct imx5_cpu_suspend_info *suspend_info;
+	int ret;
+	/* Need this to avoid compile error due to const typeof in fncpy.h */
+	void (*suspend_asm)(void __iomem *) = soc_data->suspend_asm;
+
+	if (!suspend_asm)
+		return 0;
+
+	if (!soc_data->suspend_asm_sz || !*soc_data->suspend_asm_sz)
+		return -EINVAL;
+
+	ret = imx_suspend_alloc_ocram(
+		*soc_data->suspend_asm_sz + sizeof(*suspend_info),
+		&suspend_ocram_base, NULL);
+	if (ret)
+		return ret;
+
+	suspend_info = suspend_ocram_base;
+
+	suspend_info->io_count = soc_data->suspend_io_count;
+	memcpy(suspend_info->io_state, soc_data->suspend_io_config,
+	       sizeof(*suspend_info->io_state) * soc_data->suspend_io_count);
+
+	suspend_info->m4if_base = ioremap(soc_data->m4if_addr, SZ_16K);
+	if (!suspend_info->m4if_base) {
+		ret = -ENOMEM;
+		goto failed_map_m4if;
+	}
+
+	suspend_info->iomuxc_base = ioremap(soc_data->iomuxc_addr, SZ_16K);
+	if (!suspend_info->iomuxc_base) {
+		ret = -ENOMEM;
+		goto failed_map_iomuxc;
+	}
+
+	imx5_suspend_in_ocram_fn = fncpy(
+		suspend_ocram_base + sizeof(*suspend_info),
+		suspend_asm,
+		*soc_data->suspend_asm_sz);
+
+	return 0;
+
+failed_map_iomuxc:
+	iounmap(suspend_info->m4if_base);
+
+failed_map_m4if:
+	return ret;
+}
+
 static int __init imx5_pm_common_init(const struct imx5_pm_data *data)
 {
 	int ret;
@ -208,6 +389,7 @@ static int __init imx5_pm_common_init(const struct imx5_pm_data *data)

 	arm_pm_idle = imx5_pm_idle;

+	ccm_base = ioremap(data->ccm_addr, SZ_16K);
 	cortex_base = ioremap(data->cortex_addr, SZ_16K);
 	gpc_base = ioremap(data->gpc_addr, SZ_16K);
 	WARN_ON(!ccm_base || !cortex_base || !gpc_base);
@ -219,6 +401,11 @@ static int __init imx5_pm_common_init(const struct imx5_pm_data *data)
 	if (ret)
 		pr_warn("%s: cpuidle init failed %d\n", __func__, ret);

+	ret = imx5_suspend_init(data);
+	if (ret)
+		pr_warn("%s: No DDR LPM support with suspend %d!\n",
+			__func__, ret);
+
 	suspend_set_ops(&mx5_suspend_ops);

 	return 0;
@ -226,10 +413,12 @@ static int __init imx5_pm_common_init(const struct imx5_pm_data *data)

 void __init imx51_pm_init(void)
 {
-	imx5_pm_common_init(&imx51_pm_data);
+	if (IS_ENABLED(CONFIG_SOC_IMX51))
+		imx5_pm_common_init(&imx51_pm_data);
 }

 void __init imx53_pm_init(void)
 {
-	imx5_pm_common_init(&imx53_pm_data);
+	if (IS_ENABLED(CONFIG_SOC_IMX53))
+		imx5_pm_common_init(&imx53_pm_data);
 }
--- a/arch/arm/mach-imx/pm-imx6.c
+++ b/arch/arm/mach-imx/pm-imx6.c
@ -255,7 +255,7 @@ static void imx6q_enable_wb(bool enable)
 	writel_relaxed(val, ccm_base + CCR);
 }

-int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
+int imx6_set_lpm(enum mxc_cpu_pwr_mode mode)
 {
 	u32 val = readl_relaxed(ccm_base + CLPCR);

@ -340,7 +340,7 @@ static int imx6q_pm_enter(suspend_state_t state)
 {
 	switch (state) {
 	case PM_SUSPEND_STANDBY:
-		imx6q_set_lpm(STOP_POWER_ON);
+		imx6_set_lpm(STOP_POWER_ON);
 		imx6q_set_int_mem_clk_lpm(true);
 		imx_gpc_pre_suspend(false);
 		if (cpu_is_imx6sl())
@ -350,10 +350,10 @@ static int imx6q_pm_enter(suspend_state_t state)
 		if (cpu_is_imx6sl())
 			imx6sl_set_wait_clk(false);
 		imx_gpc_post_resume();
-		imx6q_set_lpm(WAIT_CLOCKED);
+		imx6_set_lpm(WAIT_CLOCKED);
 		break;
 	case PM_SUSPEND_MEM:
-		imx6q_set_lpm(STOP_POWER_OFF);
+		imx6_set_lpm(STOP_POWER_OFF);
 		imx6q_set_int_mem_clk_lpm(false);
 		imx6q_enable_wb(true);
 		/*
@ -373,7 +373,7 @@ static int imx6q_pm_enter(suspend_state_t state)
 		imx6_enable_rbc(false);
 		imx6q_enable_wb(false);
 		imx6q_set_int_mem_clk_lpm(true);
-		imx6q_set_lpm(WAIT_CLOCKED);
+		imx6_set_lpm(WAIT_CLOCKED);
 		break;
 	default:
 		return -EINVAL;
@ -392,11 +392,6 @@ static const struct platform_suspend_ops imx6q_pm_ops = {
 	.valid = imx6q_pm_valid,
 };

-void __init imx6q_pm_set_ccm_base(void __iomem *base)
-{
-	ccm_base = base;
-}
-
 static int __init imx6_pm_get_base(struct imx6_pm_base *base,
 				const char *compat)
 {
@ -482,8 +477,7 @@ static int __init imx6q_suspend_init(const struct imx6_pm_socdata *socdata)

 	/*
 	 * ccm physical address is not used by asm code currently,
-	 * so get ccm virtual address directly, as we already have
-	 * it from ccm driver.
+	 * so get ccm virtual address directly.
 	 */
 	pm_info->ccm_base.vbase = ccm_base;

@ -568,7 +562,7 @@ static void __init imx6_pm_common_init(const struct imx6_pm_socdata

 	/*
 	 * This is for SW workaround step #1 of ERR007265, see comments
-	 * in imx6q_set_lpm for details of this errata.
+	 * in imx6_set_lpm for details of this errata.
 	 * Force IOMUXC irq pending, so that the interrupt to GPC can be
 	 * used to deassert dsm_request signal when the signal gets
 	 * asserted unexpectedly.
@ -579,6 +573,24 @@ static void __init imx6_pm_common_init(const struct imx6_pm_socdata
 				   IMX6Q_GPR1_GINT);
 }

+void __init imx6_pm_ccm_init(const char *ccm_compat)
+{
+	struct device_node *np;
+	u32 val;
+
+	np = of_find_compatible_node(NULL, NULL, ccm_compat);
+	ccm_base = of_iomap(np, 0);
+	BUG_ON(!ccm_base);
+
+	/*
+	 * Initialize CCM_CLPCR_LPM into RUN mode to avoid ARM core
+	 * clock being shut down unexpectedly by WAIT mode.
+	 */
+	val = readl_relaxed(ccm_base + CLPCR);
+	val &= ~BM_CLPCR_LPM;
+	writel_relaxed(val, ccm_base + CLPCR);
+}
+
 void __init imx6q_pm_init(void)
 {
 	imx6_pm_common_init(&imx6q_pm_data);
--- a/arch/arm/mach-imx/suspend-imx53.S
+++ b/arch/arm/mach-imx/suspend-imx53.S
@ -0,0 +1,139 @@
+/*
+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc.
+ */
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/linkage.h>
+
+#define M4IF_MCR0_OFFSET			(0x008C)
+#define M4IF_MCR0_FDVFS				(0x1 << 11)
+#define M4IF_MCR0_FDVACK			(0x1 << 27)
+
+	.align 3
+
+/*
+ * ==================== low level suspend ====================
+ *
+ * On entry
+ * r0: pm_info structure address;
+ *
+ * suspend ocram space layout:
+ * ======================== high address ======================
+ *                              .
+ *                              .
+ *                              .
+ *                              ^
+ *                              ^
+ *                              ^
+ *                      imx53_suspend code
+ *              PM_INFO structure(imx53_suspend_info)
+ * ======================== low address =======================
+ */
+
+/* Offsets of members of struct imx53_suspend_info */
+#define SUSPEND_INFO_MX53_M4IF_V_OFFSET		0x0
+#define SUSPEND_INFO_MX53_IOMUXC_V_OFFSET	0x4
+#define SUSPEND_INFO_MX53_IO_COUNT_OFFSET	0x8
+#define SUSPEND_INFO_MX53_IO_STATE_OFFSET	0xc
+
+ENTRY(imx53_suspend)
+	stmfd	sp!, {r4,r5,r6,r7}
+
+	/* Save pad config */
+	ldr	r1, [r0, #SUSPEND_INFO_MX53_IO_COUNT_OFFSET]
+	cmp	r1, #0
+	beq	skip_pad_conf_1
+
+	add	r2, r0, #SUSPEND_INFO_MX53_IO_STATE_OFFSET
+	ldr	r3, [r0, #SUSPEND_INFO_MX53_IOMUXC_V_OFFSET]
+
+1:
+	ldr	r5, [r2], #12	/* IOMUXC register offset */
+	ldr	r6, [r3, r5]	/* current value */
+	str	r6, [r2], #4	/* save area */
+	subs	r1, r1, #1
+	bne	1b
+
+skip_pad_conf_1:
+	/* Set FDVFS bit of M4IF_MCR0 to request DDR to enter self-refresh */
+	ldr	r1, [r0, #SUSPEND_INFO_MX53_M4IF_V_OFFSET]
+	ldr	r2,[r1, #M4IF_MCR0_OFFSET]
+	orr	r2, r2, #M4IF_MCR0_FDVFS
+	str	r2,[r1, #M4IF_MCR0_OFFSET]
+
+	/* Poll FDVACK bit of M4IF_MCR to wait for DDR to enter self-refresh */
+wait_sr_ack:
+	ldr	r2,[r1, #M4IF_MCR0_OFFSET]
+	ands	r2, r2, #M4IF_MCR0_FDVACK
+	beq	wait_sr_ack
+
+	/* Set pad config */
+	ldr	r1, [r0, #SUSPEND_INFO_MX53_IO_COUNT_OFFSET]
+	cmp	r1, #0
+	beq	skip_pad_conf_2
+
+	add	r2, r0, #SUSPEND_INFO_MX53_IO_STATE_OFFSET
+	ldr	r3, [r0, #SUSPEND_INFO_MX53_IOMUXC_V_OFFSET]
+
+2:
+	ldr	r5, [r2], #4	/* IOMUXC register offset */
+	ldr	r6, [r2], #4	/* clear */
+	ldr	r7, [r3, r5]
+	bic	r7, r7, r6
+	ldr	r6, [r2], #8	/* set */
+	orr	r7, r7, r6
+	str	r7, [r3, r5]
+	subs	r1, r1, #1
+	bne	2b
+
+skip_pad_conf_2:
+	/* Zzz, enter stop mode */
+	wfi
+	nop
+	nop
+	nop
+	nop
+
+	/* Restore pad config */
+	ldr	r1, [r0, #SUSPEND_INFO_MX53_IO_COUNT_OFFSET]
+	cmp	r1, #0
+	beq	skip_pad_conf_3
+
+	add	r2, r0, #SUSPEND_INFO_MX53_IO_STATE_OFFSET
+	ldr	r3, [r0, #SUSPEND_INFO_MX53_IOMUXC_V_OFFSET]
+
+3:
+	ldr	r5, [r2], #12	/* IOMUXC register offset */
+	ldr	r6, [r2], #4	/* saved value */
+	str	r6, [r3, r5]
+	subs	r1, r1, #1
+	bne	3b
+
+skip_pad_conf_3:
+	/* Clear FDVFS bit of M4IF_MCR0 to request DDR to exit self-refresh */
+	ldr	r1, [r0, #SUSPEND_INFO_MX53_M4IF_V_OFFSET]
+	ldr	r2,[r1, #M4IF_MCR0_OFFSET]
+	bic	r2, r2, #M4IF_MCR0_FDVFS
+	str	r2,[r1, #M4IF_MCR0_OFFSET]
+
+	/* Poll FDVACK bit of M4IF_MCR to wait for DDR to exit self-refresh */
+wait_ar_ack:
+	ldr	r2,[r1, #M4IF_MCR0_OFFSET]
+	ands	r2, r2, #M4IF_MCR0_FDVACK
+	bne	wait_ar_ack
+
+	/* Restore registers */
+	ldmfd	sp!, {r4,r5,r6,r7}
+	mov	pc, lr
+
+ENDPROC(imx53_suspend)
+
+ENTRY(imx53_suspend_sz)
+        .word   . - imx53_suspend
--- a/arch/arm/mach-imx/time.c
+++ b/arch/arm/mach-imx/time.c
@ -1,385 +0,0 @@
-/*
- *  linux/arch/arm/plat-mxc/time.c
- *
- *  Copyright (C) 2000-2001 Deep Blue Solutions
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *  Copyright (C) 2006-2007 Pavel Pisa (ppisa@pikron.com)
- *  Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/clockchips.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/sched_clock.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-
-#include <asm/mach/time.h>
-
-#include "common.h"
-#include "hardware.h"
-
-/*
- * There are 2 versions of the timer hardware on Freescale MXC hardware.
- * Version 1: MX1/MXL, MX21, MX27.
- * Version 2: MX25, MX31, MX35, MX37, MX51
- */
-
-/* defines common for all i.MX */
-#define MXC_TCTL		0x00
-#define MXC_TCTL_TEN		(1 << 0) /* Enable module */
-#define MXC_TPRER		0x04
-
-/* MX1, MX21, MX27 */
-#define MX1_2_TCTL_CLK_PCLK1	(1 << 1)
-#define MX1_2_TCTL_IRQEN	(1 << 4)
-#define MX1_2_TCTL_FRR		(1 << 8)
-#define MX1_2_TCMP		0x08
-#define MX1_2_TCN		0x10
-#define MX1_2_TSTAT		0x14
-
-/* MX21, MX27 */
-#define MX2_TSTAT_CAPT		(1 << 1)
-#define MX2_TSTAT_COMP		(1 << 0)
-
-/* MX31, MX35, MX25, MX5, MX6 */
-#define V2_TCTL_WAITEN		(1 << 3) /* Wait enable mode */
-#define V2_TCTL_CLK_IPG		(1 << 6)
-#define V2_TCTL_CLK_PER		(2 << 6)
-#define V2_TCTL_CLK_OSC_DIV8	(5 << 6)
-#define V2_TCTL_FRR		(1 << 9)
-#define V2_TCTL_24MEN		(1 << 10)
-#define V2_TPRER_PRE24M		12
-#define V2_IR			0x0c
-#define V2_TSTAT		0x08
-#define V2_TSTAT_OF1		(1 << 0)
-#define V2_TCN			0x24
-#define V2_TCMP			0x10
-
-#define V2_TIMER_RATE_OSC_DIV8	3000000
-
-#define timer_is_v1()	(cpu_is_mx1() || cpu_is_mx21() || cpu_is_mx27())
-#define timer_is_v2()	(!timer_is_v1())
-
-static struct clock_event_device clockevent_mxc;
-static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED;
-
-static void __iomem *timer_base;
-
-static inline void gpt_irq_disable(void)
-{
-	unsigned int tmp;
-
-	if (timer_is_v2())
-		__raw_writel(0, timer_base + V2_IR);
-	else {
-		tmp = __raw_readl(timer_base + MXC_TCTL);
-		__raw_writel(tmp & ~MX1_2_TCTL_IRQEN, timer_base + MXC_TCTL);
-	}
-}
-
-static inline void gpt_irq_enable(void)
-{
-	if (timer_is_v2())
-		__raw_writel(1<<0, timer_base + V2_IR);
-	else {
-		__raw_writel(__raw_readl(timer_base + MXC_TCTL) | MX1_2_TCTL_IRQEN,
-			timer_base + MXC_TCTL);
-	}
-}
-
-static void gpt_irq_acknowledge(void)
-{
-	if (timer_is_v1()) {
-		if (cpu_is_mx1())
-			__raw_writel(0, timer_base + MX1_2_TSTAT);
-		else
-			__raw_writel(MX2_TSTAT_CAPT | MX2_TSTAT_COMP,
-				timer_base + MX1_2_TSTAT);
-	} else if (timer_is_v2())
-		__raw_writel(V2_TSTAT_OF1, timer_base + V2_TSTAT);
-}
-
-static void __iomem *sched_clock_reg;
-
-static u64 notrace mxc_read_sched_clock(void)
-{
-	return sched_clock_reg ? __raw_readl(sched_clock_reg) : 0;
-}
-
-static struct delay_timer imx_delay_timer;
-
-static unsigned long imx_read_current_timer(void)
-{
-	return __raw_readl(sched_clock_reg);
-}
-
-static int __init mxc_clocksource_init(struct clk *timer_clk)
-{
-	unsigned int c = clk_get_rate(timer_clk);
-	void __iomem *reg = timer_base + (timer_is_v2() ? V2_TCN : MX1_2_TCN);
-
-	imx_delay_timer.read_current_timer = &imx_read_current_timer;
-	imx_delay_timer.freq = c;
-	register_current_timer_delay(&imx_delay_timer);
-
-	sched_clock_reg = reg;
-
-	sched_clock_register(mxc_read_sched_clock, 32, c);
-	return clocksource_mmio_init(reg, "mxc_timer1", c, 200, 32,
-			clocksource_mmio_readl_up);
-}
-
-/* clock event */
-
-static int mx1_2_set_next_event(unsigned long evt,
-			      struct clock_event_device *unused)
-{
-	unsigned long tcmp;
-
-	tcmp = __raw_readl(timer_base + MX1_2_TCN) + evt;
-
-	__raw_writel(tcmp, timer_base + MX1_2_TCMP);
-
-	return (int)(tcmp - __raw_readl(timer_base + MX1_2_TCN)) < 0 ?
-				-ETIME : 0;
-}
-
-static int v2_set_next_event(unsigned long evt,
-			      struct clock_event_device *unused)
-{
-	unsigned long tcmp;
-
-	tcmp = __raw_readl(timer_base + V2_TCN) + evt;
-
-	__raw_writel(tcmp, timer_base + V2_TCMP);
-
-	return evt < 0x7fffffff &&
-		(int)(tcmp - __raw_readl(timer_base + V2_TCN)) < 0 ?
-				-ETIME : 0;
-}
-
-#ifdef DEBUG
-static const char *clock_event_mode_label[] = {
-	[CLOCK_EVT_MODE_PERIODIC] = "CLOCK_EVT_MODE_PERIODIC",
-	[CLOCK_EVT_MODE_ONESHOT]  = "CLOCK_EVT_MODE_ONESHOT",
-	[CLOCK_EVT_MODE_SHUTDOWN] = "CLOCK_EVT_MODE_SHUTDOWN",
-	[CLOCK_EVT_MODE_UNUSED]   = "CLOCK_EVT_MODE_UNUSED",
-	[CLOCK_EVT_MODE_RESUME]   = "CLOCK_EVT_MODE_RESUME",
-};
-#endif /* DEBUG */
-
-static void mxc_set_mode(enum clock_event_mode mode,
-				struct clock_event_device *evt)
-{
-	unsigned long flags;
-
-	/*
-	 * The timer interrupt generation is disabled at least
-	 * for enough time to call mxc_set_next_event()
-	 */
-	local_irq_save(flags);
-
-	/* Disable interrupt in GPT module */
-	gpt_irq_disable();
-
-	if (mode != clockevent_mode) {
-		/* Set event time into far-far future */
-		if (timer_is_v2())
-			__raw_writel(__raw_readl(timer_base + V2_TCN) - 3,
-					timer_base + V2_TCMP);
-		else
-			__raw_writel(__raw_readl(timer_base + MX1_2_TCN) - 3,
-					timer_base + MX1_2_TCMP);
-
-		/* Clear pending interrupt */
-		gpt_irq_acknowledge();
-	}
-
-#ifdef DEBUG
-	printk(KERN_INFO "mxc_set_mode: changing mode from %s to %s\n",
-		clock_event_mode_label[clockevent_mode],
-		clock_event_mode_label[mode]);
-#endif /* DEBUG */
-
-	/* Remember timer mode */
-	clockevent_mode = mode;
-	local_irq_restore(flags);
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		printk(KERN_ERR"mxc_set_mode: Periodic mode is not "
-				"supported for i.MX\n");
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-	/*
-	 * Do not put overhead of interrupt enable/disable into
-	 * mxc_set_next_event(), the core has about 4 minutes
-	 * to call mxc_set_next_event() or shutdown clock after
-	 * mode switching
-	 */
-		local_irq_save(flags);
-		gpt_irq_enable();
-		local_irq_restore(flags);
-		break;
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_RESUME:
-		/* Left event sources disabled, no more interrupts appear */
-		break;
-	}
-}
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = &clockevent_mxc;
-	uint32_t tstat;
-
-	if (timer_is_v2())
-		tstat = __raw_readl(timer_base + V2_TSTAT);
-	else
-		tstat = __raw_readl(timer_base + MX1_2_TSTAT);
-
-	gpt_irq_acknowledge();
-
-	evt->event_handler(evt);
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction mxc_timer_irq = {
-	.name		= "i.MX Timer Tick",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= mxc_timer_interrupt,
-};
-
-static struct clock_event_device clockevent_mxc = {
-	.name		= "mxc_timer1",
-	.features	= CLOCK_EVT_FEAT_ONESHOT,
-	.set_mode	= mxc_set_mode,
-	.set_next_event	= mx1_2_set_next_event,
-	.rating		= 200,
-};
-
-static int __init mxc_clockevent_init(struct clk *timer_clk)
-{
-	if (timer_is_v2())
-		clockevent_mxc.set_next_event = v2_set_next_event;
-
-	clockevent_mxc.cpumask = cpumask_of(0);
-	clockevents_config_and_register(&clockevent_mxc,
-					clk_get_rate(timer_clk),
-					0xff, 0xfffffffe);
-
-	return 0;
-}
-
-static void __init _mxc_timer_init(int irq,
-				   struct clk *clk_per, struct clk *clk_ipg)
-{
-	uint32_t tctl_val;
-
-	if (IS_ERR(clk_per)) {
-		pr_err("i.MX timer: unable to get clk\n");
-		return;
-	}
-
-	if (!IS_ERR(clk_ipg))
-		clk_prepare_enable(clk_ipg);
-
-	clk_prepare_enable(clk_per);
-
-	/*
-	 * Initialise to a known state (all timers off, and timing reset)
-	 */
-
-	__raw_writel(0, timer_base + MXC_TCTL);
-	__raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */
-
-	if (timer_is_v2()) {
-		tctl_val = V2_TCTL_FRR | V2_TCTL_WAITEN | MXC_TCTL_TEN;
-		if (clk_get_rate(clk_per) == V2_TIMER_RATE_OSC_DIV8) {
-			tctl_val |= V2_TCTL_CLK_OSC_DIV8;
-			if (cpu_is_imx6dl() || cpu_is_imx6sx()) {
-				/* 24 / 8 = 3 MHz */
-				__raw_writel(7 << V2_TPRER_PRE24M,
-					timer_base + MXC_TPRER);
-				tctl_val |= V2_TCTL_24MEN;
-			}
-		} else {
-			tctl_val |= V2_TCTL_CLK_PER;
-		}
-	} else {
-		tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN;
-	}
-
-	__raw_writel(tctl_val, timer_base + MXC_TCTL);
-
-	/* init and register the timer to the framework */
-	mxc_clocksource_init(clk_per);
-	mxc_clockevent_init(clk_per);
-
-	/* Make irqs happen */
-	setup_irq(irq, &mxc_timer_irq);
-}
-
-void __init mxc_timer_init(void __iomem *base, int irq)
-{
-	struct clk *clk_per = clk_get_sys("imx-gpt.0", "per");
-	struct clk *clk_ipg = clk_get_sys("imx-gpt.0", "ipg");
-
-	timer_base = base;
-
-	_mxc_timer_init(irq, clk_per, clk_ipg);
-}
-
-static void __init mxc_timer_init_dt(struct device_node *np)
-{
-	struct clk *clk_per, *clk_ipg;
-	int irq;
-
-	if (timer_base)
-		return;
-
-	timer_base = of_iomap(np, 0);
-	WARN_ON(!timer_base);
-	irq = irq_of_parse_and_map(np, 0);
-
-	clk_ipg = of_clk_get_by_name(np, "ipg");
-
-	/* Try osc_per first, and fall back to per otherwise */
-	clk_per = of_clk_get_by_name(np, "osc_per");
-	if (IS_ERR(clk_per))
-		clk_per = of_clk_get_by_name(np, "per");
-
-	_mxc_timer_init(irq, clk_per, clk_ipg);
-}
-CLOCKSOURCE_OF_DECLARE(mx1_timer, "fsl,imx1-gpt", mxc_timer_init_dt);
-CLOCKSOURCE_OF_DECLARE(mx25_timer, "fsl,imx25-gpt", mxc_timer_init_dt);
-CLOCKSOURCE_OF_DECLARE(mx50_timer, "fsl,imx50-gpt", mxc_timer_init_dt);
-CLOCKSOURCE_OF_DECLARE(mx51_timer, "fsl,imx51-gpt", mxc_timer_init_dt);
-CLOCKSOURCE_OF_DECLARE(mx53_timer, "fsl,imx53-gpt", mxc_timer_init_dt);
-CLOCKSOURCE_OF_DECLARE(mx6q_timer, "fsl,imx6q-gpt", mxc_timer_init_dt);
-CLOCKSOURCE_OF_DECLARE(mx6sl_timer, "fsl,imx6sl-gpt", mxc_timer_init_dt);
-CLOCKSOURCE_OF_DECLARE(mx6sx_timer, "fsl,imx6sx-gpt", mxc_timer_init_dt);
--- a/arch/arm/mach-lpc18xx/Makefile
+++ b/arch/arm/mach-lpc18xx/Makefile
@ -0,0 +1 @@
+obj-y += board-dt.o
--- a/arch/arm/mach-lpc18xx/Makefile.boot
+++ b/arch/arm/mach-lpc18xx/Makefile.boot
@ -0,0 +1,3 @@
+# Empty file waiting for deletion once Makefile.boot isn't needed any more.
+# Patch waits for application at
+# http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=7889/1 .
--- a/arch/arm/mach-lpc18xx/board-dt.c
+++ b/arch/arm/mach-lpc18xx/board-dt.c
@ -0,0 +1,22 @@
+/*
+ * Device Tree board file for NXP LPC18xx/43xx
+ *
+ * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <asm/mach/arch.h>
+
+static const char *const lpc18xx_43xx_compat[] __initconst = {
+	"nxp,lpc1850",
+	"nxp,lpc4350",
+	"nxp,lpc4370",
+	NULL
+};
+
+DT_MACHINE_START(LPC18XXDT, "NXP LPC18xx/43xx (Device Tree)")
+	.dt_compat = lpc18xx_43xx_compat,
+MACHINE_END
--- a/arch/arm/mach-omap1/ams-delta-fiq-handler.S
+++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
@ -17,11 +17,10 @@
 #include <asm/assembler.h>

 #include <mach/board-ams-delta.h>
-
-#include <mach/irqs.h>
 #include <mach/ams-delta-fiq.h>

 #include "iomap.h"
+#include "soc.h"

 /*
 * GPIO related definitions, copied from arch/arm/plat-omap/gpio.c.
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@ -626,6 +626,7 @@ MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)")
 	.map_io		= ams_delta_map_io,
 	.init_early	= omap1_init_early,
 	.init_irq	= omap1_init_irq,
+	.handle_irq	= omap1_handle_irq,
 	.init_machine	= ams_delta_init,
 	.init_late	= ams_delta_init_late,
 	.init_time	= omap1_timer_init,
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@ -362,6 +362,7 @@ MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample")
 	.map_io		= omap_fsample_map_io,
 	.init_early	= omap1_init_early,
 	.init_irq	= omap1_init_irq,
+	.handle_irq	= omap1_handle_irq,
 	.init_machine	= omap_fsample_init,
 	.init_late	= omap1_init_late,
 	.init_time	= omap1_timer_init,
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@ -82,6 +82,7 @@ MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710")
 	.map_io		= omap16xx_map_io,
 	.init_early	= omap1_init_early,
 	.init_irq	= omap1_init_irq,
+	.handle_irq	= omap1_handle_irq,
 	.init_machine	= omap_generic_init,
 	.init_late	= omap1_init_late,
 	.init_time	= omap1_timer_init,
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@ -426,6 +426,7 @@ MACHINE_START(OMAP_H2, "TI-H2")
 	.map_io		= omap16xx_map_io,
 	.init_early     = omap1_init_early,
 	.init_irq	= omap1_init_irq,
+	.handle_irq	= omap1_handle_irq,
 	.init_machine	= h2_init,
 	.init_late	= omap1_init_late,
 	.init_time	= omap1_timer_init,
--- a/arch/arm/mach-omap1/board-h3-mmc.c
+++ b/arch/arm/mach-omap1/board-h3-mmc.c
@ -16,6 +16,7 @@

 #include <linux/i2c/tps65010.h>

+#include "common.h"
 #include "board-h3.h"
 #include "mmc.h"

--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@ -452,6 +452,7 @@ MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")
 	.map_io		= omap16xx_map_io,
 	.init_early     = omap1_init_early,
 	.init_irq	= omap1_init_irq,
+	.handle_irq	= omap1_handle_irq,
 	.init_machine	= h3_init,
 	.init_late	= omap1_init_late,
 	.init_time	= omap1_timer_init,
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@ -601,6 +601,7 @@ MACHINE_START(HERALD, "HTC Herald")
 	.map_io         = htcherald_map_io,
 	.init_early     = omap1_init_early,
 	.init_irq       = omap1_init_irq,
+	.handle_irq	= omap1_handle_irq,
 	.init_machine   = htcherald_init,
 	.init_late	= omap1_init_late,
 	.init_time	= omap1_timer_init,
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@ -456,6 +456,7 @@ MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
 	.map_io		= innovator_map_io,
 	.init_early     = omap1_init_early,
 	.init_irq	= omap1_init_irq,
+	.handle_irq	= omap1_handle_irq,
 	.init_machine	= innovator_init,
 	.init_late	= omap1_init_late,
 	.init_time	= omap1_timer_init,
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@ -294,6 +294,7 @@ MACHINE_START(NOKIA770, "Nokia 770")
 	.map_io		= omap16xx_map_io,
 	.init_early     = omap1_init_early,
 	.init_irq	= omap1_init_irq,
+	.handle_irq	= omap1_handle_irq,
 	.init_machine	= omap_nokia770_init,
 	.init_late	= omap1_init_late,
 	.init_time	= omap1_timer_init,
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@ -610,6 +610,7 @@ MACHINE_START(OMAP_OSK, "TI-OSK")
 	.map_io		= omap16xx_map_io,
 	.init_early	= omap1_init_early,
 	.init_irq	= omap1_init_irq,
+	.handle_irq	= omap1_handle_irq,
 	.init_machine	= osk_init,
 	.init_late	= omap1_init_late,
 	.init_time	= omap1_timer_init,
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@ -235,6 +235,7 @@ MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E")
 	.map_io		= omap15xx_map_io,
 	.init_early     = omap1_init_early,
 	.init_irq	= omap1_init_irq,
+	.handle_irq	= omap1_handle_irq,
 	.init_machine	= omap_palmte_init,
 	.init_late	= omap1_init_late,
 	.init_time	= omap1_timer_init,
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@ -282,6 +282,7 @@ MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T")
 	.map_io		= omap15xx_map_io,
 	.init_early     = omap1_init_early,
 	.init_irq	= omap1_init_irq,
+	.handle_irq	= omap1_handle_irq,
 	.init_machine	= omap_palmtt_init,
 	.init_late	= omap1_init_late,
 	.init_time	= omap1_timer_init,
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@ -297,6 +297,7 @@ MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71")
 	.map_io		= omap15xx_map_io,
 	.init_early     = omap1_init_early,
 	.init_irq	= omap1_init_irq,
+	.handle_irq	= omap1_handle_irq,
 	.init_machine	= omap_palmz71_init,
 	.init_late	= omap1_init_late,
 	.init_time	= omap1_timer_init,
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@ -324,6 +324,7 @@ MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
 	.map_io		= omap_perseus2_map_io,
 	.init_early     = omap1_init_early,
 	.init_irq	= omap1_init_irq,
+	.handle_irq	= omap1_handle_irq,
 	.init_machine	= omap_perseus2_init,
 	.init_late	= omap1_init_late,
 	.init_time	= omap1_timer_init,
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@ -343,6 +343,7 @@ MACHINE_START(SX1, "OMAP310 based Siemens SX1")
 	.map_io		= omap15xx_map_io,
 	.init_early     = omap1_init_early,
 	.init_irq	= omap1_init_irq,
+	.handle_irq	= omap1_handle_irq,
 	.init_machine	= omap_sx1_init,
 	.init_late	= omap1_init_late,
 	.init_time	= omap1_timer_init,
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@ -288,6 +288,7 @@ MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
 	.map_io		= omap15xx_map_io,
 	.init_early     = omap1_init_early,
 	.init_irq	= omap1_init_irq,
+	.handle_irq	= omap1_handle_irq,
 	.init_machine	= voiceblue_init,
 	.init_late	= omap1_init_late,
 	.init_time	= omap1_timer_init,
--- a/arch/arm/mach-omap1/common.h
+++ b/arch/arm/mach-omap1/common.h
@ -30,10 +30,14 @@
 #include <linux/i2c-omap.h>
 #include <linux/reboot.h>

+#include <asm/exception.h>
+
 #include <plat/i2c.h>

 #include <mach/irqs.h>

+#include "soc.h"
+
 #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
 void omap7xx_map_io(void);
 #else
@ -73,6 +77,7 @@ static inline int omap_serial_wakeup_init(void)

 void omap1_init_early(void);
 void omap1_init_irq(void);
+void __exception_irq_entry omap1_handle_irq(struct pt_regs *regs);
 void omap1_init_late(void);
 void omap1_restart(enum reboot_mode, const char *);

@ -91,8 +96,6 @@ static inline int __init omap_32k_timer_init(void)
 }
 #endif

-extern u32 omap_irq_flags;
-
 #ifdef CONFIG_ARCH_OMAP16XX
 extern int ocpi_enable(void);
 #else
--- a/arch/arm/mach-omap1/dma.c
+++ b/arch/arm/mach-omap1/dma.c
@ -28,7 +28,7 @@
 #include <linux/omap-dma.h>
 #include <mach/tc.h>

-#include <mach/irqs.h>
+#include "soc.h"

 #define OMAP1_DMA_BASE			(0xfffed800)
 #define OMAP1_LOGICAL_DMA_CH_COUNT	17
--- a/arch/arm/mach-omap1/gpio16xx.c
+++ b/arch/arm/mach-omap1/gpio16xx.c
@ -21,6 +21,8 @@

 #include <mach/irqs.h>

+#include "soc.h"
+
 #define OMAP1610_GPIO1_BASE		0xfffbe400
 #define OMAP1610_GPIO2_BASE		0xfffbec00
 #define OMAP1610_GPIO3_BASE		0xfffbb400
--- a/arch/arm/mach-omap1/gpio7xx.c
+++ b/arch/arm/mach-omap1/gpio7xx.c
@ -21,6 +21,8 @@

 #include <mach/irqs.h>

+#include "soc.h"
+
 #define OMAP7XX_GPIO1_BASE		0xfffbc000
 #define OMAP7XX_GPIO2_BASE		0xfffbc800
 #define OMAP7XX_GPIO3_BASE		0xfffbd000
--- a/arch/arm/mach-omap1/i2c.c
+++ b/arch/arm/mach-omap1/i2c.c
@ -27,7 +27,6 @@

 #define OMAP_I2C_SIZE		0x3f
 #define OMAP1_I2C_BASE		0xfffb3800
-#define OMAP1_INT_I2C		(32 + 4)

 static const char name[] = "omap_i2c";

@ -67,7 +66,7 @@ int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *pdata,
 	res[0].start = OMAP1_I2C_BASE;
 	res[0].end = res[0].start + OMAP_I2C_SIZE;
 	res[0].flags = IORESOURCE_MEM;
-	res[1].start = OMAP1_INT_I2C;
+	res[1].start = INT_I2C;
 	res[1].flags = IORESOURCE_IRQ;
 	pdev->resource = res;

--- a/arch/arm/mach-omap1/include/mach/entry-macro.S
+++ b/arch/arm/mach-omap1/include/mach/entry-macro.S
@ -1,39 +0,0 @@
-/*
- * arch/arm/mach-omap1/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for OMAP-based platforms
- *
- * Copyright (C) 2009 Texas Instruments
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\base, =OMAP1_IO_ADDRESS(OMAP_IH1_BASE)
-		ldr	\irqnr, [\base, #IRQ_ITR_REG_OFFSET]
-		ldr	\tmp, [\base, #IRQ_MIR_REG_OFFSET]
-		mov	\irqstat, #0xffffffff
-		bic	\tmp, \irqstat, \tmp
-		tst	\irqnr, \tmp
-		beq	1510f
-
-		ldr	\irqnr, [\base, #IRQ_SIR_FIQ_REG_OFFSET]
-		ldr	\tmp, =omap_irq_flags	@ irq flags address
-		ldr	\tmp, [\tmp, #0]	@ irq flags value
-		cmp	\irqnr, #0
-		ldreq	\irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
-		cmpeq	\irqnr, \tmp
-		ldreq	\base, =OMAP1_IO_ADDRESS(OMAP_IH2_BASE)
-		ldreq	\irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
-		addeqs	\irqnr, \irqnr, #32
-1510:
-		.endm
-
--- a/arch/arm/mach-omap1/include/mach/irqs.h
+++ b/arch/arm/mach-omap1/include/mach/irqs.h
@ -34,84 +34,84 @@
 * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
 *
 */
-#define INT_CAMERA		1
-#define INT_FIQ			3
-#define INT_RTDX		6
-#define INT_DSP_MMU_ABORT	7
-#define INT_HOST		8
-#define INT_ABORT		9
-#define INT_BRIDGE_PRIV		13
-#define INT_GPIO_BANK1		14
-#define INT_UART3		15
-#define INT_TIMER3		16
-#define INT_DMA_CH0_6		19
-#define INT_DMA_CH1_7		20
-#define INT_DMA_CH2_8		21
-#define INT_DMA_CH3		22
-#define INT_DMA_CH4		23
-#define INT_DMA_CH5		24
-#define INT_TIMER1		26
-#define INT_WD_TIMER		27
-#define INT_BRIDGE_PUB		28
-#define INT_TIMER2		30
-#define INT_LCD_CTRL		31
+#define INT_CAMERA		(NR_IRQS_LEGACY + 1)
+#define INT_FIQ			(NR_IRQS_LEGACY + 3)
+#define INT_RTDX		(NR_IRQS_LEGACY + 6)
+#define INT_DSP_MMU_ABORT	(NR_IRQS_LEGACY + 7)
+#define INT_HOST		(NR_IRQS_LEGACY + 8)
+#define INT_ABORT		(NR_IRQS_LEGACY + 9)
+#define INT_BRIDGE_PRIV		(NR_IRQS_LEGACY + 13)
+#define INT_GPIO_BANK1		(NR_IRQS_LEGACY + 14)
+#define INT_UART3		(NR_IRQS_LEGACY + 15)
+#define INT_TIMER3		(NR_IRQS_LEGACY + 16)
+#define INT_DMA_CH0_6		(NR_IRQS_LEGACY + 19)
+#define INT_DMA_CH1_7		(NR_IRQS_LEGACY + 20)
+#define INT_DMA_CH2_8		(NR_IRQS_LEGACY + 21)
+#define INT_DMA_CH3		(NR_IRQS_LEGACY + 22)
+#define INT_DMA_CH4		(NR_IRQS_LEGACY + 23)
+#define INT_DMA_CH5		(NR_IRQS_LEGACY + 24)
+#define INT_TIMER1		(NR_IRQS_LEGACY + 26)
+#define INT_WD_TIMER		(NR_IRQS_LEGACY + 27)
+#define INT_BRIDGE_PUB		(NR_IRQS_LEGACY + 28)
+#define INT_TIMER2		(NR_IRQS_LEGACY + 30)
+#define INT_LCD_CTRL		(NR_IRQS_LEGACY + 31)

 /*
 * OMAP-1510 specific IRQ numbers for interrupt handler 1
 */
-#define INT_1510_IH2_IRQ	0
-#define INT_1510_RES2		2
-#define INT_1510_SPI_TX		4
-#define INT_1510_SPI_RX		5
-#define INT_1510_DSP_MAILBOX1	10
-#define INT_1510_DSP_MAILBOX2	11
-#define INT_1510_RES12		12
-#define INT_1510_LB_MMU		17
-#define INT_1510_RES18		18
-#define INT_1510_LOCAL_BUS	29
+#define INT_1510_IH2_IRQ	(NR_IRQS_LEGACY + 0)
+#define INT_1510_RES2		(NR_IRQS_LEGACY + 2)
+#define INT_1510_SPI_TX		(NR_IRQS_LEGACY + 4)
+#define INT_1510_SPI_RX		(NR_IRQS_LEGACY + 5)
+#define INT_1510_DSP_MAILBOX1	(NR_IRQS_LEGACY + 10)
+#define INT_1510_DSP_MAILBOX2	(NR_IRQS_LEGACY + 11)
+#define INT_1510_RES12		(NR_IRQS_LEGACY + 12)
+#define INT_1510_LB_MMU		(NR_IRQS_LEGACY + 17)
+#define INT_1510_RES18		(NR_IRQS_LEGACY + 18)
+#define INT_1510_LOCAL_BUS	(NR_IRQS_LEGACY + 29)

 /*
 * OMAP-1610 specific IRQ numbers for interrupt handler 1
 */
 #define INT_1610_IH2_IRQ	INT_1510_IH2_IRQ
-#define INT_1610_IH2_FIQ	2
-#define INT_1610_McBSP2_TX	4
-#define INT_1610_McBSP2_RX	5
-#define INT_1610_DSP_MAILBOX1	10
-#define INT_1610_DSP_MAILBOX2	11
-#define INT_1610_LCD_LINE	12
-#define INT_1610_GPTIMER1	17
-#define INT_1610_GPTIMER2	18
-#define INT_1610_SSR_FIFO_0	29
+#define INT_1610_IH2_FIQ	(NR_IRQS_LEGACY + 2)
+#define INT_1610_McBSP2_TX	(NR_IRQS_LEGACY + 4)
+#define INT_1610_McBSP2_RX	(NR_IRQS_LEGACY + 5)
+#define INT_1610_DSP_MAILBOX1	(NR_IRQS_LEGACY + 10)
+#define INT_1610_DSP_MAILBOX2	(NR_IRQS_LEGACY + 11)
+#define INT_1610_LCD_LINE	(NR_IRQS_LEGACY + 12)
+#define INT_1610_GPTIMER1	(NR_IRQS_LEGACY + 17)
+#define INT_1610_GPTIMER2	(NR_IRQS_LEGACY + 18)
+#define INT_1610_SSR_FIFO_0	(NR_IRQS_LEGACY + 29)

 /*
 * OMAP-7xx specific IRQ numbers for interrupt handler 1
 */
-#define INT_7XX_IH2_FIQ		0
-#define INT_7XX_IH2_IRQ		1
-#define INT_7XX_USB_NON_ISO	2
-#define INT_7XX_USB_ISO		3
-#define INT_7XX_ICR		4
-#define INT_7XX_EAC		5
-#define INT_7XX_GPIO_BANK1	6
-#define INT_7XX_GPIO_BANK2	7
-#define INT_7XX_GPIO_BANK3	8
-#define INT_7XX_McBSP2TX	10
-#define INT_7XX_McBSP2RX	11
-#define INT_7XX_McBSP2RX_OVF	12
-#define INT_7XX_LCD_LINE	14
-#define INT_7XX_GSM_PROTECT	15
-#define INT_7XX_TIMER3		16
-#define INT_7XX_GPIO_BANK5	17
-#define INT_7XX_GPIO_BANK6	18
-#define INT_7XX_SPGIO_WR	29
+#define INT_7XX_IH2_FIQ		(NR_IRQS_LEGACY + 0)
+#define INT_7XX_IH2_IRQ		(NR_IRQS_LEGACY + 1)
+#define INT_7XX_USB_NON_ISO	(NR_IRQS_LEGACY + 2)
+#define INT_7XX_USB_ISO		(NR_IRQS_LEGACY + 3)
+#define INT_7XX_ICR		(NR_IRQS_LEGACY + 4)
+#define INT_7XX_EAC		(NR_IRQS_LEGACY + 5)
+#define INT_7XX_GPIO_BANK1	(NR_IRQS_LEGACY + 6)
+#define INT_7XX_GPIO_BANK2	(NR_IRQS_LEGACY + 7)
+#define INT_7XX_GPIO_BANK3	(NR_IRQS_LEGACY + 8)
+#define INT_7XX_McBSP2TX	(NR_IRQS_LEGACY + 10)
+#define INT_7XX_McBSP2RX	(NR_IRQS_LEGACY + 11)
+#define INT_7XX_McBSP2RX_OVF	(NR_IRQS_LEGACY + 12)
+#define INT_7XX_LCD_LINE	(NR_IRQS_LEGACY + 14)
+#define INT_7XX_GSM_PROTECT	(NR_IRQS_LEGACY + 15)
+#define INT_7XX_TIMER3		(NR_IRQS_LEGACY + 16)
+#define INT_7XX_GPIO_BANK5	(NR_IRQS_LEGACY + 17)
+#define INT_7XX_GPIO_BANK6	(NR_IRQS_LEGACY + 18)
+#define INT_7XX_SPGIO_WR	(NR_IRQS_LEGACY + 29)

 /*
 * IRQ numbers for interrupt handler 2
 *
 * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
 */
-#define IH2_BASE		32
+#define IH2_BASE		(NR_IRQS_LEGACY + 32)

 #define INT_KEYBOARD		(1 + IH2_BASE)
 #define INT_uWireTX		(2 + IH2_BASE)
@ -255,11 +255,7 @@
 #endif
 #define OMAP_FPGA_IRQ_END	(OMAP_FPGA_IRQ_BASE + OMAP_FPGA_NR_IRQS)

-#define NR_IRQS			OMAP_FPGA_IRQ_END
-
-#define OMAP_IRQ_BIT(irq)	(1 << ((irq) % 32))
-
-#include <mach/hardware.h>
+#define OMAP_IRQ_BIT(irq)	(1 << ((irq - NR_IRQS_LEGACY) % 32))

 #ifdef CONFIG_FIQ
 #define FIQ_START		1024
--- a/arch/arm/mach-omap1/include/mach/memory.h
+++ b/arch/arm/mach-omap1/include/mach/memory.h
@ -5,6 +5,9 @@
 #ifndef __ASM_ARCH_MEMORY_H
 #define __ASM_ARCH_MEMORY_H

+/* REVISIT: omap1 legacy drivers still rely on this */
+#include <mach/soc.h>
+
 /*
 * Bus address is physical address, except for OMAP-1510 Local Bus.
 * OMAP-1510 bus address is translated into a Local Bus address if the
@ -14,7 +17,6 @@
 * because of the strncmp().
 */
 #if defined(CONFIG_ARCH_OMAP15XX) && !defined(__ASSEMBLER__)
-#include <mach/soc.h>

 /*
 * OMAP-1510 Local Bus address offset
--- a/arch/arm/mach-omap1/include/mach/serial.h
+++ b/arch/arm/mach-omap1/include/mach/serial.h
@ -27,11 +27,6 @@
 */
 #define OMAP_UART_INFO_OFS	0x3ffc

-/* OMAP1 serial ports */
-#define OMAP1_UART1_BASE	0xfffb0000
-#define OMAP1_UART2_BASE	0xfffb0800
-#define OMAP1_UART3_BASE	0xfffb9800
-
 #define OMAP_PORT_SHIFT		2
 #define OMAP7XX_PORT_SHIFT	0

--- a/arch/arm/mach-omap1/include/mach/soc.h
+++ b/arch/arm/mach-omap1/include/mach/soc.h
@ -28,6 +28,10 @@
 #ifndef __ASM_ARCH_OMAP_CPU_H
 #define __ASM_ARCH_OMAP_CPU_H

+#include <asm/irq.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
 #ifndef __ASSEMBLY__

 #include <linux/bitops.h>
--- a/arch/arm/mach-omap1/irq.c
+++ b/arch/arm/mach-omap1/irq.c
@ -43,6 +43,7 @@
 #include <linux/io.h>

 #include <asm/irq.h>
+#include <asm/exception.h>
 #include <asm/mach/irq.h>

 #include "soc.h"
@ -56,66 +57,41 @@

 struct omap_irq_bank {
 	unsigned long base_reg;
+	void __iomem *va;
 	unsigned long trigger_map;
 	unsigned long wake_enable;
 };

-u32 omap_irq_flags;
+static u32 omap_l2_irq;
 static unsigned int irq_bank_count;
 static struct omap_irq_bank *irq_banks;
+static struct irq_domain *domain;

+static inline unsigned int irq_bank_readl(int bank, int offset)
+{
+	return readl_relaxed(irq_banks[bank].va + offset);
+}
 static inline void irq_bank_writel(unsigned long value, int bank, int offset)
 {
-	omap_writel(value, irq_banks[bank].base_reg + offset);
+	writel_relaxed(value, irq_banks[bank].va + offset);
 }

-static void omap_ack_irq(struct irq_data *d)
+static void omap_ack_irq(int irq)
 {
-	if (d->irq > 31)
-		omap_writel(0x1, OMAP_IH2_BASE + IRQ_CONTROL_REG_OFFSET);
+	if (irq > 31)
+		writel_relaxed(0x1, irq_banks[1].va + IRQ_CONTROL_REG_OFFSET);

-	omap_writel(0x1, OMAP_IH1_BASE + IRQ_CONTROL_REG_OFFSET);
-}
-
-static void omap_mask_irq(struct irq_data *d)
-{
-	int bank = IRQ_BANK(d->irq);
-	u32 l;
-
-	l = omap_readl(irq_banks[bank].base_reg + IRQ_MIR_REG_OFFSET);
-	l |= 1 << IRQ_BIT(d->irq);
-	omap_writel(l, irq_banks[bank].base_reg + IRQ_MIR_REG_OFFSET);
-}
-
-static void omap_unmask_irq(struct irq_data *d)
-{
-	int bank = IRQ_BANK(d->irq);
-	u32 l;
-
-	l = omap_readl(irq_banks[bank].base_reg + IRQ_MIR_REG_OFFSET);
-	l &= ~(1 << IRQ_BIT(d->irq));
-	omap_writel(l, irq_banks[bank].base_reg + IRQ_MIR_REG_OFFSET);
+	writel_relaxed(0x1, irq_banks[0].va + IRQ_CONTROL_REG_OFFSET);
 }

 static void omap_mask_ack_irq(struct irq_data *d)
 {
-	omap_mask_irq(d);
-	omap_ack_irq(d);
+	struct irq_chip_type *ct = irq_data_get_chip_type(d);
+
+	ct->chip.irq_mask(d);
+	omap_ack_irq(d->irq);
 }

-static int omap_wake_irq(struct irq_data *d, unsigned int enable)
-{
-	int bank = IRQ_BANK(d->irq);
-
-	if (enable)
-		irq_banks[bank].wake_enable |= IRQ_BIT(d->irq);
-	else
-		irq_banks[bank].wake_enable &= ~IRQ_BIT(d->irq);
-
-	return 0;
-}
-
-
 /*
 * Allows tuning the IRQ type and priority
 *
@ -165,46 +141,105 @@ static struct omap_irq_bank omap1610_irq_banks[] = {
 };
 #endif

-static struct irq_chip omap_irq_chip = {
-	.name		= "MPU",
-	.irq_ack	= omap_mask_ack_irq,
-	.irq_mask	= omap_mask_irq,
-	.irq_unmask	= omap_unmask_irq,
-	.irq_set_wake	= omap_wake_irq,
-};
+asmlinkage void __exception_irq_entry omap1_handle_irq(struct pt_regs *regs)
+{
+	void __iomem *l1 = irq_banks[0].va;
+	void __iomem *l2 = irq_banks[1].va;
+	u32 irqnr;
+
+	do {
+		irqnr = readl_relaxed(l1 + IRQ_ITR_REG_OFFSET);
+		irqnr &= ~(readl_relaxed(l1 + IRQ_MIR_REG_OFFSET) & 0xffffffff);
+		if (!irqnr)
+			break;
+
+		irqnr = readl_relaxed(l1 + IRQ_SIR_FIQ_REG_OFFSET);
+		if (irqnr)
+			goto irq;
+
+		irqnr = readl_relaxed(l1 + IRQ_SIR_IRQ_REG_OFFSET);
+		if (irqnr == omap_l2_irq) {
+			irqnr = readl_relaxed(l2 + IRQ_SIR_IRQ_REG_OFFSET);
+			if (irqnr)
+				irqnr += 32;
+		}
+irq:
+		if (irqnr)
+			handle_domain_irq(domain, irqnr, regs);
+		else
+			break;
+	} while (irqnr);
+}
+
+static __init void
+omap_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num)
+{
+	struct irq_chip_generic *gc;
+	struct irq_chip_type *ct;
+
+	gc = irq_alloc_generic_chip("MPU", 1, irq_start, base,
+				    handle_level_irq);
+	ct = gc->chip_types;
+	ct->chip.irq_ack = omap_mask_ack_irq;
+	ct->chip.irq_mask = irq_gc_mask_set_bit;
+	ct->chip.irq_unmask = irq_gc_mask_clr_bit;
+	ct->chip.irq_set_wake = irq_gc_set_wake;
+	ct->regs.mask = IRQ_MIR_REG_OFFSET;
+	irq_setup_generic_chip(gc, IRQ_MSK(num), IRQ_GC_INIT_MASK_CACHE,
+			       IRQ_NOREQUEST | IRQ_NOPROBE, 0);
+}

 void __init omap1_init_irq(void)
 {
-	int i, j;
+	struct irq_chip_type *ct;
+	struct irq_data *d = NULL;
+	int i, j, irq_base;
+	unsigned long nr_irqs;

 #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
 	if (cpu_is_omap7xx()) {
-		omap_irq_flags = INT_7XX_IH2_IRQ;
 		irq_banks = omap7xx_irq_banks;
 		irq_bank_count = ARRAY_SIZE(omap7xx_irq_banks);
 	}
 #endif
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap1510()) {
-		omap_irq_flags = INT_1510_IH2_IRQ;
 		irq_banks = omap1510_irq_banks;
 		irq_bank_count = ARRAY_SIZE(omap1510_irq_banks);
 	}
 	if (cpu_is_omap310()) {
-		omap_irq_flags = INT_1510_IH2_IRQ;
 		irq_banks = omap310_irq_banks;
 		irq_bank_count = ARRAY_SIZE(omap310_irq_banks);
 	}
 #endif
 #if defined(CONFIG_ARCH_OMAP16XX)
 	if (cpu_is_omap16xx()) {
-		omap_irq_flags = INT_1510_IH2_IRQ;
 		irq_banks = omap1610_irq_banks;
 		irq_bank_count = ARRAY_SIZE(omap1610_irq_banks);
 	}
 #endif
-	printk("Total of %i interrupts in %i interrupt banks\n",
-	       irq_bank_count * 32, irq_bank_count);
+
+	for (i = 0; i < irq_bank_count; i++) {
+		irq_banks[i].va = ioremap(irq_banks[i].base_reg, 0xff);
+		if (WARN_ON(!irq_banks[i].va))
+			return;
+	}
+
+	nr_irqs = irq_bank_count * 32;
+
+	irq_base = irq_alloc_descs(-1, 0, nr_irqs, 0);
+	if (irq_base < 0) {
+		pr_warn("Couldn't allocate IRQ numbers\n");
+		irq_base = 0;
+	}
+	omap_l2_irq = cpu_is_omap7xx() ? irq_base + 1 : irq_base;
+	omap_l2_irq -= NR_IRQS_LEGACY;
+
+	domain = irq_domain_add_legacy(NULL, nr_irqs, irq_base, 0,
+				       &irq_domain_simple_ops, NULL);
+
+	pr_info("Total of %lu interrupts in %i interrupt banks\n",
+		nr_irqs, irq_bank_count);

 	/* Mask and clear all interrupts */
 	for (i = 0; i < irq_bank_count; i++) {
@ -227,19 +262,15 @@ void __init omap1_init_irq(void)

 			irq_trigger = irq_banks[i].trigger_map >> IRQ_BIT(j);
 			omap_irq_set_cfg(j, 0, 0, irq_trigger);
-
-			irq_set_chip_and_handler(j, &omap_irq_chip,
-						 handle_level_irq);
 			set_irq_flags(j, IRQF_VALID);
 		}
+		omap_alloc_gc(irq_banks[i].va, irq_base + i * 32, 32);
 	}

 	/* Unmask level 2 handler */
-
-	if (cpu_is_omap7xx())
-		omap_unmask_irq(irq_get_irq_data(INT_7XX_IH2_IRQ));
-	else if (cpu_is_omap15xx())
-		omap_unmask_irq(irq_get_irq_data(INT_1510_IH2_IRQ));
-	else if (cpu_is_omap16xx())
-		omap_unmask_irq(irq_get_irq_data(INT_1610_IH2_IRQ));
+	d = irq_get_irq_data(irq_find_mapping(domain, omap_l2_irq));
+	if (d) {
+		ct = irq_data_get_chip_type(d);
+		ct->chip.irq_unmask(d);
+	}
 }
--- a/arch/arm/mach-omap1/mux.c
+++ b/arch/arm/mach-omap1/mux.c
@ -36,7 +36,7 @@
 static struct omap_mux_cfg arch_mux_cfg;

 #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-static struct pin_config __initdata_or_module omap7xx_pins[] = {
+static struct pin_config omap7xx_pins[] = {
 MUX_CFG_7XX("E2_7XX_KBR0",        12,   21,    0,   20,   1, 0)
 MUX_CFG_7XX("J7_7XX_KBR1",        12,   25,    0,   24,   1, 0)
 MUX_CFG_7XX("E1_7XX_KBR2",        12,   29,    0,   28,   1, 0)
@ -82,7 +82,7 @@ MUX_CFG_7XX("UART_7XX_2",          8,    1,    6,    0,   0, 0)
 #endif	/* CONFIG_ARCH_OMAP730 || CONFIG_ARCH_OMAP850 */

 #if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)
-static struct pin_config __initdata_or_module omap1xxx_pins[] = {
+static struct pin_config omap1xxx_pins[] = {
 /*
 *	 description		mux  mode   mux	 pull pull  pull  pu_pd	 pu  dbg
 *				reg  offset mode reg  bit   ena	  reg
@ -343,7 +343,7 @@ MUX_CFG("Y14_1610_CCP_DATAM",	 9,   21,    6,   2,   3,   1,    2,     0,  0)
 #define OMAP1XXX_PINS_SZ	0
 #endif	/* CONFIG_ARCH_OMAP15XX || CONFIG_ARCH_OMAP16XX */

-static int __init_or_module omap1_cfg_reg(const struct pin_config *cfg)
+static int omap1_cfg_reg(const struct pin_config *cfg)
 {
 	static DEFINE_SPINLOCK(mux_spin_lock);
 	unsigned long flags;
@ -469,7 +469,7 @@ int __init omap_mux_register(struct omap_mux_cfg *arch_mux_cfg)
 /*
 * Sets the Omap MUX and PULL_DWN registers based on the table
 */
-int __init_or_module omap_cfg_reg(const unsigned long index)
+int omap_cfg_reg(const unsigned long index)
 {
 	struct pin_config *reg;

--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@ -62,6 +62,7 @@
 #include "iomap.h"
 #include "clock.h"
 #include "pm.h"
+#include "soc.h"
 #include "sram.h"

 static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];
--- a/Show More
+++ b/Show More