ASoC: tas571x: implemented digital mute
The driver did not have a mute function. The amplifier was brought out of shutdown mode (hard-mute) once for ever in probe(), which was causing clicks and pops when altering the I2C register configuration later. This adds the digital_mute() function. The amplifier unmute in probe() was removed. Signed-off-by: Petr Kulhavy <petr@barix.com> Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
parent
f55532a0c0
commit
0400485076
@ -167,6 +167,23 @@ static int tas571x_hw_params(struct snd_pcm_substream *substream,
|
||||
TAS571X_SDI_FMT_MASK, val);
|
||||
}
|
||||
|
||||
static int tas571x_mute(struct snd_soc_dai *dai, int mute)
|
||||
{
|
||||
struct snd_soc_codec *codec = dai->codec;
|
||||
u8 sysctl2;
|
||||
int ret;
|
||||
|
||||
sysctl2 = mute ? TAS571X_SYS_CTRL_2_SDN_MASK : 0;
|
||||
|
||||
ret = snd_soc_update_bits(codec,
|
||||
TAS571X_SYS_CTRL_2_REG,
|
||||
TAS571X_SYS_CTRL_2_SDN_MASK,
|
||||
sysctl2);
|
||||
usleep_range(1000, 2000);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int tas571x_set_bias_level(struct snd_soc_codec *codec,
|
||||
enum snd_soc_bias_level level)
|
||||
{
|
||||
@ -214,6 +231,7 @@ static int tas571x_set_bias_level(struct snd_soc_codec *codec,
|
||||
static const struct snd_soc_dai_ops tas571x_dai_ops = {
|
||||
.set_fmt = tas571x_set_dai_fmt,
|
||||
.hw_params = tas571x_hw_params,
|
||||
.digital_mute = tas571x_mute,
|
||||
};
|
||||
|
||||
static const char *const tas5711_supply_names[] = {
|
||||
@ -445,10 +463,6 @@ static int tas571x_i2c_probe(struct i2c_client *client,
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
ret = regmap_update_bits(priv->regmap, TAS571X_SYS_CTRL_2_REG,
|
||||
TAS571X_SYS_CTRL_2_SDN_MASK, 0);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
memcpy(&priv->codec_driver, &tas571x_codec, sizeof(priv->codec_driver));
|
||||
priv->codec_driver.controls = priv->chip->controls;
|
||||
|
Loading…
Reference in New Issue
Block a user