From 054b40a6111ffffc5aaadf0551f0e13b8dd41d7e Mon Sep 17 00:00:00 2001 From: Jack Pham Date: Thu, 4 Feb 2021 22:39:04 +0530 Subject: [PATCH] arm64: dts: qcom: sm8350-mtp: enable USB nodes Enable both USB controllers and associated hsphy and qmp phy nodes on sm8350 MTP. Designate the usb_1 instance as peripheral-mode only until proper PMIC based Type-C dual-role handling is supported. TODO: the second USB controller is exposed to a microAB port. Dual- role can be supported for this by adding the "usb-role-switch" property as well as defining a USB connector node with a "gpio-usb-b-connector" compatible. However, this requires GPIO support from PM8350 which is still missing. Signed-off-by: Jack Pham Link: https://lore.kernel.org/r/20210116013802.1609-3-jackp@codeaurora.org Signed-off-by: Vinod Koul Link: https://lore.kernel.org/r/20210204170907.63545-4-vkoul@kernel.org Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/sm8350-mtp.dts | 42 +++++++++++++++++++++++++ 1 file changed, 42 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm8350-mtp.dts b/arch/arm64/boot/dts/qcom/sm8350-mtp.dts index 8923657579fb..a2baa1ad3752 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8350-mtp.dts @@ -248,3 +248,45 @@ &uart2 { status = "okay"; }; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdda-pll-supply = <&vreg_l5b_0p88>; + vdda18-supply = <&vreg_l1c_1p8>; + vdda33-supply = <&vreg_l2b_3p07>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l6b_1p2>; + vdda-pll-supply = <&vreg_l1b_0p88>; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_2_hsphy { + status = "okay"; + + vdda-pll-supply = <&vreg_l5b_0p88>; + vdda18-supply = <&vreg_l1c_1p8>; + vdda33-supply = <&vreg_l2b_3p07>; +}; + +&usb_2_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l6b_1p2>; + vdda-pll-supply = <&vreg_l5b_0p88>; +};