arm64: dts: qcom: msm8916-lg-m216: Add initial device tree
This commit adds initial support for the LG K10 smartphone. Support for the following features is included: - Serial - Keys - Battery and charger - Accelerometer, magnetometer - Touchscreen - Sound and modem - Haptic Signed-off-by: Cristian Cozzolino <cristian_ci@protonmail.com> [Nikita: Minor cleanup] Signed-off-by: Nikita Travkin <nikita@trvn.ru> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240623-msm8916-lg-initial-v1-2-6fbcf714d69b@trvn.ru Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This commit is contained in:
Cristian Cozzolino
Bjorn Andersson
parent
2c69048c5d
commit
0655b44746
@ -31,6 +31,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8916-gplus-fl8005a.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8916-huawei-g7.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8916-lg-m216.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8150.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8910.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8916-motorola-harpia.dtb
|
||||
|
||||
251
arch/arm64/boot/dts/qcom/msm8916-lg-m216.dts
Normal file
251
arch/arm64/boot/dts/qcom/msm8916-lg-m216.dts
Normal file
@ -0,0 +1,251 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-only
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "msm8916-pm8916.dtsi"
|
||||
#include "msm8916-modem-qdsp6.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
|
||||
/ {
|
||||
model = "LG K10 (K420n)";
|
||||
compatible = "lg,m216", "qcom,msm8916";
|
||||
chassis-type = "handset";
|
||||
|
||||
aliases {
|
||||
mmc0 = &sdhc_1; /* eMMC */
|
||||
mmc1 = &sdhc_2; /* SD card */
|
||||
serial0 = &blsp_uart2;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0";
|
||||
};
|
||||
|
||||
battery: battery {
|
||||
compatible = "simple-battery";
|
||||
voltage-min-design-microvolt = <3300000>;
|
||||
voltage-max-design-microvolt = <4350000>;
|
||||
energy-full-design-microwatt-hours = <8800000>;
|
||||
charge-full-design-microamp-hours = <2300000>;
|
||||
|
||||
ocv-capacity-celsius = <25>;
|
||||
ocv-capacity-table-0 = <4342000 100>, <4266000 95>, <4206000 90>,
|
||||
<4148000 85>, <4094000 80>, <4046000 75>, <3994000 70>,
|
||||
<3956000 65>, <3916000 60>, <3866000 55>, <3831000 50>,
|
||||
<3808000 45>, <3789000 40>, <3776000 35>, <3769000 30>,
|
||||
<3760000 25>, <3740000 20>, <3712000 16>, <3684000 13>,
|
||||
<3676000 11>, <3674000 10>, <3672000 9>, <3669000 8>,
|
||||
<3665000 7>, <3660000 6>, <3643000 5>, <3602000 4>,
|
||||
<3542000 3>, <3458000 2>, <3326000 1>, <3000000 0>;
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
pinctrl-0 = <&gpio_keys_default>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
label = "GPIO Buttons";
|
||||
|
||||
volume-up-button {
|
||||
label = "Volume Up";
|
||||
gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
};
|
||||
|
||||
volume-down-button {
|
||||
label = "Volume Down";
|
||||
gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_VOLUMEDOWN>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&blsp_i2c2 {
|
||||
status = "okay";
|
||||
|
||||
accelerometer@11 {
|
||||
compatible = "bosch,bmc150_accel";
|
||||
reg = <0x11>;
|
||||
|
||||
interrupts-extended = <&tlmm 115 IRQ_TYPE_EDGE_RISING>;
|
||||
|
||||
mount-matrix = "0", "1", "0",
|
||||
"-1", "0", "0",
|
||||
"0", "0", "1";
|
||||
|
||||
vdd-supply = <&pm8916_l17>;
|
||||
vddio-supply = <&pm8916_l6>;
|
||||
|
||||
pinctrl-0 = <&accel_int_default>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
magnetometer@13 {
|
||||
compatible = "bosch,bmc150_magn";
|
||||
reg = <0x13>;
|
||||
|
||||
interrupts-extended = <&tlmm 69 IRQ_TYPE_EDGE_RISING>;
|
||||
|
||||
vdd-supply = <&pm8916_l17>;
|
||||
vddio-supply = <&pm8916_l6>;
|
||||
|
||||
pinctrl-0 = <&magn_int_default>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
};
|
||||
|
||||
&blsp_i2c5 {
|
||||
status = "okay";
|
||||
|
||||
touchscreen@34 {
|
||||
compatible = "melfas,mip4_ts";
|
||||
reg = <0x34>;
|
||||
|
||||
interrupts-extended = <&tlmm 13 IRQ_TYPE_EDGE_FALLING>;
|
||||
ce-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
pinctrl-0 = <&touchscreen_default>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
};
|
||||
|
||||
&blsp_uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mpss_mem {
|
||||
reg = <0x0 0x86800000 0x0 0x4a00000>;
|
||||
};
|
||||
|
||||
&pm8916_bms {
|
||||
monitored-battery = <&battery>;
|
||||
power-supplies = <&pm8916_charger>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pm8916_charger {
|
||||
qcom,fast-charge-safe-current = <700000>;
|
||||
qcom,fast-charge-safe-voltage = <4300000>;
|
||||
|
||||
monitored-battery = <&battery>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pm8916_codec {
|
||||
qcom,micbias1-ext-cap;
|
||||
qcom,micbias-lvl = <2800>;
|
||||
qcom,mbhc-vthreshold-low = <75 100 120 180 500>;
|
||||
qcom,mbhc-vthreshold-high = <75 100 120 180 500>;
|
||||
qcom,hphl-jack-type-normally-open;
|
||||
};
|
||||
|
||||
&pm8916_rpm_regulators {
|
||||
pm8916_l17: l17 {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <2850000>;
|
||||
};
|
||||
};
|
||||
|
||||
&pm8916_vib {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhc_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhc_2 {
|
||||
pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
|
||||
pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
|
||||
cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sound {
|
||||
audio-routing =
|
||||
"AMIC1", "MIC BIAS External1",
|
||||
"AMIC2", "MIC BIAS Internal2",
|
||||
"AMIC3", "MIC BIAS External1";
|
||||
};
|
||||
|
||||
&usb {
|
||||
dr_mode = "peripheral";
|
||||
extcon = <&pm8916_charger>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_hs_phy {
|
||||
extcon = <&pm8916_charger>;
|
||||
};
|
||||
|
||||
&venus {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&venus_mem {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wcnss {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wcnss_iris {
|
||||
compatible = "qcom,wcn3620";
|
||||
};
|
||||
|
||||
&wcnss_mem {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
accel_int_default: accel-int-default-state {
|
||||
pins = "gpio115";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
gpio_keys_default: gpio-keys-default-state {
|
||||
pins = "gpio107", "gpio108";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
magn_int_default: magn-int-default-state {
|
||||
pins = "gpio69";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
sdc2_cd_default: sdc2-cd-default-state {
|
||||
pins = "gpio38";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
touchscreen_default: touchscreen-default-state {
|
||||
touchscreen-pins {
|
||||
pins = "gpio13";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
ce-pins {
|
||||
pins = "gpio12";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
};
|
||||
Loading…
x
Reference in New Issue
Block a user