From 06f11dfb5b75acafdb86b50ac5c90b49716d9362 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Thu, 29 Sep 2022 15:39:20 +0200
Subject: [PATCH] ARM: mmp: remove all board files

The old-style board files were marked as 'unused' a while ago
and can now be removed for good, leaving only devicetree based
boot support.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/arm/configs/pxa168_defconfig |   3 -
 arch/arm/configs/pxa910_defconfig |   2 -
 arch/arm/mach-mmp/Kconfig         |  96 --------
 arch/arm/mach-mmp/Makefile        |   9 -
 arch/arm/mach-mmp/aspenite.c      | 284 ---------------------
 arch/arm/mach-mmp/avengers_lite.c |  55 -----
 arch/arm/mach-mmp/brownstone.c    | 237 ------------------
 arch/arm/mach-mmp/flint.c         | 131 ----------
 arch/arm/mach-mmp/gplugd.c        | 206 ----------------
 arch/arm/mach-mmp/jasper.c        | 185 --------------
 arch/arm/mach-mmp/mfp-mmp2.h      | 396 ------------------------------
 arch/arm/mach-mmp/mfp-pxa168.h    | 355 --------------------------
 arch/arm/mach-mmp/mfp-pxa910.h    | 170 -------------
 arch/arm/mach-mmp/teton_bga.c     | 100 --------
 arch/arm/mach-mmp/teton_bga.h     |  22 --
 arch/arm/mach-mmp/ttc_dkb.c       | 315 ------------------------
 16 files changed, 2566 deletions(-)
 delete mode 100644 arch/arm/mach-mmp/aspenite.c
 delete mode 100644 arch/arm/mach-mmp/avengers_lite.c
 delete mode 100644 arch/arm/mach-mmp/brownstone.c
 delete mode 100644 arch/arm/mach-mmp/flint.c
 delete mode 100644 arch/arm/mach-mmp/gplugd.c
 delete mode 100644 arch/arm/mach-mmp/jasper.c
 delete mode 100644 arch/arm/mach-mmp/mfp-mmp2.h
 delete mode 100644 arch/arm/mach-mmp/mfp-pxa168.h
 delete mode 100644 arch/arm/mach-mmp/mfp-pxa910.h
 delete mode 100644 arch/arm/mach-mmp/teton_bga.c
 delete mode 100644 arch/arm/mach-mmp/teton_bga.h
 delete mode 100644 arch/arm/mach-mmp/ttc_dkb.c

diff --git a/arch/arm/configs/pxa168_defconfig b/arch/arm/configs/pxa168_defconfig
index 826ebbef2e3c..8422ddc9bab2 100644
--- a/arch/arm/configs/pxa168_defconfig
+++ b/arch/arm/configs/pxa168_defconfig
@@ -1,9 +1,6 @@
 CONFIG_SYSVIPC=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_BLK_DEV_BSG is not set
-CONFIG_MACH_ASPENITE=y
-CONFIG_MACH_ZYLONITE2=y
-CONFIG_MACH_AVENGERS_LITE=y
 CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
diff --git a/arch/arm/configs/pxa910_defconfig b/arch/arm/configs/pxa910_defconfig
index 353008de5678..48e41ca582af 100644
--- a/arch/arm/configs/pxa910_defconfig
+++ b/arch/arm/configs/pxa910_defconfig
@@ -11,8 +11,6 @@ CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
-CONFIG_MACH_TAVOREVB=y
-CONFIG_MACH_TTC_DKB=y
 CONFIG_AEABI=y
 CONFIG_FPE_NWFPE=y
 CONFIG_SLAB=y
diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
index da38106149c4..a1396c495b85 100644
--- a/arch/arm/mach-mmp/Kconfig
+++ b/arch/arm/mach-mmp/Kconfig
@@ -13,99 +13,6 @@ if ARCH_MMP
 
 menu "Marvell PXA168/910/MMP2 Implementations"
 
-if ATAGS
-
-config MACH_ASPENITE
-	bool "Marvell's PXA168 Aspenite Development Board"
-	depends on ARCH_MULTI_V5
-	depends on UNUSED_BOARD_FILES
-	select CPU_PXA168
-	help
-	  Say 'Y' here if you want to support the Marvell PXA168-based
-	  Aspenite Development Board.
-
-config MACH_ZYLONITE2
-	bool "Marvell's PXA168 Zylonite2 Development Board"
-	depends on ARCH_MULTI_V5
-	depends on UNUSED_BOARD_FILES
-	select CPU_PXA168
-	help
-	  Say 'Y' here if you want to support the Marvell PXA168-based
-	  Zylonite2 Development Board.
-
-config MACH_AVENGERS_LITE
-	bool "Marvell's PXA168 Avengers Lite Development Board"
-	depends on ARCH_MULTI_V5
-	depends on UNUSED_BOARD_FILES
-	select CPU_PXA168
-	help
-	  Say 'Y' here if you want to support the Marvell PXA168-based
-	  Avengers Lite Development Board.
-
-config MACH_TTC_DKB
-	bool "Marvell's PXA910 TavorEVB/TTC_DKB Development Board"
-	depends on ARCH_MULTI_V5
-	depends on UNUSED_BOARD_FILES
-	select CPU_PXA910
-	help
-	  Say 'Y' here if you want to support the Marvell PXA910-based
-	  TTC_DKB Development Board.
-
-config MACH_BROWNSTONE
-	bool "Marvell's Brownstone Development Platform"
-	depends on ARCH_MULTI_V7
-	depends on UNUSED_BOARD_FILES
-	select CPU_MMP2
-	help
-	  Say 'Y' here if you want to support the Marvell MMP2-based
-	  Brown Development Platform.
-	  MMP2-based board can't be co-existed with PXA168-based &
-	  PXA910-based development board. Since MMP2 is compatible to
-	  ARMv7 architecture.
-
-config MACH_FLINT
-	bool "Marvell's Flint Development Platform"
-	depends on ARCH_MULTI_V7
-	depends on UNUSED_BOARD_FILES
-	select CPU_MMP2
-	help
-	  Say 'Y' here if you want to support the Marvell MMP2-based
-	  Flint Development Platform.
-	  MMP2-based board can't be co-existed with PXA168-based &
-	  PXA910-based development board. Since MMP2 is compatible to
-	  ARMv7 architecture.
-
-config MACH_MARVELL_JASPER
-	bool "Marvell's Jasper Development Platform"
-	depends on ARCH_MULTI_V7
-	depends on UNUSED_BOARD_FILES
-	select CPU_MMP2
-	help
-	  Say 'Y' here if you want to support the Marvell MMP2-base
-	  Jasper Development Platform.
-	  MMP2-based board can't be co-existed with PXA168-based &
-	  PXA910-based development board. Since MMP2 is compatible to
-	  ARMv7 architecture.
-
-config MACH_TETON_BGA
-	bool "Marvell's PXA168 Teton BGA Development Board"
-	depends on ARCH_MULTI_V5
-	depends on UNUSED_BOARD_FILES
-	select CPU_PXA168
-	help
-	  Say 'Y' here if you want to support the Marvell PXA168-based
-	  Teton BGA Development Board.
-
-config MACH_GPLUGD
-	bool "Marvell's PXA168 GuruPlug Display (gplugD) Board"
-	depends on ARCH_MULTI_V5
-	depends on UNUSED_BOARD_FILES
-	select CPU_PXA168
-	help
-	  Say 'Y' here if you want to support the Marvell PXA168-based
-	  GuruPlug Display (gplugD) Board
-endif
-
 config MACH_MMP_DT
 	bool "Support MMP (ARMv5) platforms from device tree"
 	depends on ARCH_MULTI_V5
@@ -178,7 +85,4 @@ config USB_EHCI_MV_U2O
 	help
 	  Enables support for OTG controller which can be switched to host mode.
 
-config MMP_SRAM
-	bool
-
 endif
diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile
index 539d750aaf10..65cc9b691983 100644
--- a/arch/arm/mach-mmp/Makefile
+++ b/arch/arm/mach-mmp/Makefile
@@ -19,15 +19,6 @@ obj-$(CONFIG_MACH_MMP3_DT)	+= platsmp.o
 endif
 
 # board support
-obj-$(CONFIG_MACH_ASPENITE)	+= aspenite.o
-obj-$(CONFIG_MACH_ZYLONITE2)	+= aspenite.o
-obj-$(CONFIG_MACH_AVENGERS_LITE)+= avengers_lite.o
-obj-$(CONFIG_MACH_TTC_DKB)	+= ttc_dkb.o
-obj-$(CONFIG_MACH_BROWNSTONE)	+= brownstone.o
-obj-$(CONFIG_MACH_FLINT)	+= flint.o
-obj-$(CONFIG_MACH_MARVELL_JASPER) += jasper.o
 obj-$(CONFIG_MACH_MMP_DT)	+= mmp-dt.o
 obj-$(CONFIG_MACH_MMP2_DT)	+= mmp2-dt.o
 obj-$(CONFIG_MACH_MMP3_DT)	+= mmp3.o
-obj-$(CONFIG_MACH_TETON_BGA)	+= teton_bga.o
-obj-$(CONFIG_MACH_GPLUGD)	+= gplugd.o
diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c
deleted file mode 100644
index 6314824b62fc..000000000000
--- a/arch/arm/mach-mmp/aspenite.c
+++ /dev/null
@@ -1,284 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-mmp/aspenite.c
- *
- *  Support for the Marvell PXA168-based Aspenite and Zylonite2
- *  Development Platform.
- */
-#include <linux/gpio.h>
-#include <linux/gpio-pxa.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/smc91x.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/interrupt.h>
-#include <linux/platform_data/mv_usb.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <video/pxa168fb.h>
-#include <linux/input.h>
-#include <linux/platform_data/keypad-pxa27x.h>
-
-#include "addr-map.h"
-#include "mfp-pxa168.h"
-#include "pxa168.h"
-#include "pxa910.h"
-#include "irqs.h"
-#include "common.h"
-
-static unsigned long common_pin_config[] __initdata = {
-	/* Data Flash Interface */
-	GPIO0_DFI_D15,
-	GPIO1_DFI_D14,
-	GPIO2_DFI_D13,
-	GPIO3_DFI_D12,
-	GPIO4_DFI_D11,
-	GPIO5_DFI_D10,
-	GPIO6_DFI_D9,
-	GPIO7_DFI_D8,
-	GPIO8_DFI_D7,
-	GPIO9_DFI_D6,
-	GPIO10_DFI_D5,
-	GPIO11_DFI_D4,
-	GPIO12_DFI_D3,
-	GPIO13_DFI_D2,
-	GPIO14_DFI_D1,
-	GPIO15_DFI_D0,
-
-	/* Static Memory Controller */
-	GPIO18_SMC_nCS0,
-	GPIO34_SMC_nCS1,
-	GPIO23_SMC_nLUA,
-	GPIO25_SMC_nLLA,
-	GPIO28_SMC_RDY,
-	GPIO29_SMC_SCLK,
-	GPIO35_SMC_BE1,
-	GPIO36_SMC_BE2,
-	GPIO27_GPIO,	/* Ethernet IRQ */
-
-	/* UART1 */
-	GPIO107_UART1_RXD,
-	GPIO108_UART1_TXD,
-
-	/* SSP1 */
-	GPIO113_I2S_MCLK,
-	GPIO114_I2S_FRM,
-	GPIO115_I2S_BCLK,
-	GPIO116_I2S_RXD,
-	GPIO117_I2S_TXD,
-
-	/* LCD */
-	GPIO56_LCD_FCLK_RD,
-	GPIO57_LCD_LCLK_A0,
-	GPIO58_LCD_PCLK_WR,
-	GPIO59_LCD_DENA_BIAS,
-	GPIO60_LCD_DD0,
-	GPIO61_LCD_DD1,
-	GPIO62_LCD_DD2,
-	GPIO63_LCD_DD3,
-	GPIO64_LCD_DD4,
-	GPIO65_LCD_DD5,
-	GPIO66_LCD_DD6,
-	GPIO67_LCD_DD7,
-	GPIO68_LCD_DD8,
-	GPIO69_LCD_DD9,
-	GPIO70_LCD_DD10,
-	GPIO71_LCD_DD11,
-	GPIO72_LCD_DD12,
-	GPIO73_LCD_DD13,
-	GPIO74_LCD_DD14,
-	GPIO75_LCD_DD15,
-	GPIO76_LCD_DD16,
-	GPIO77_LCD_DD17,
-	GPIO78_LCD_DD18,
-	GPIO79_LCD_DD19,
-	GPIO80_LCD_DD20,
-	GPIO81_LCD_DD21,
-	GPIO82_LCD_DD22,
-	GPIO83_LCD_DD23,
-
-	/* Keypad */
-	GPIO109_KP_MKIN1,
-	GPIO110_KP_MKIN0,
-	GPIO111_KP_MKOUT7,
-	GPIO112_KP_MKOUT6,
-	GPIO121_KP_MKIN4,
-};
-
-static struct pxa_gpio_platform_data pxa168_gpio_pdata = {
-	.irq_base	= MMP_GPIO_TO_IRQ(0),
-};
-
-static struct smc91x_platdata smc91x_info = {
-	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= SMC_CS1_PHYS_BASE + 0x300,
-		.end	= SMC_CS1_PHYS_BASE + 0xfffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= MMP_GPIO_TO_IRQ(27),
-		.end	= MMP_GPIO_TO_IRQ(27),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &smc91x_info,
-	},
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-static struct mtd_partition aspenite_nand_partitions[] = {
-	{
-		.name		= "bootloader",
-		.offset		= 0,
-		.size		= SZ_1M,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "reserved",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_128K,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "reserved",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_8M,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= (SZ_2M + SZ_1M),
-		.mask_flags	= 0,
-	}, {
-		.name		= "filesystem",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_32M + SZ_16M,
-		.mask_flags	= 0,
-	}
-};
-
-static struct pxa3xx_nand_platform_data aspenite_nand_info = {
-	.parts		= aspenite_nand_partitions,
-	.nr_parts	= ARRAY_SIZE(aspenite_nand_partitions),
-};
-
-static struct i2c_board_info aspenite_i2c_info[] __initdata = {
-	{ I2C_BOARD_INFO("wm8753", 0x1b), },
-};
-
-static struct fb_videomode video_modes[] = {
-	[0] = {
-		.pixclock	= 30120,
-		.refresh	= 60,
-		.xres		= 800,
-		.yres		= 480,
-		.hsync_len	= 1,
-		.left_margin	= 215,
-		.right_margin	= 40,
-		.vsync_len	= 1,
-		.upper_margin	= 34,
-		.lower_margin	= 10,
-		.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT,
-	},
-};
-
-struct pxa168fb_mach_info aspenite_lcd_info = {
-	.id			= "Graphic Frame",
-	.modes			= video_modes,
-	.num_modes		= ARRAY_SIZE(video_modes),
-	.pix_fmt		= PIX_FMT_RGB565,
-	.io_pin_allocation_mode = PIN_MODE_DUMB_24,
-	.dumb_mode		= DUMB_MODE_RGB888,
-	.active			= 1,
-	.panel_rbswap		= 0,
-	.invert_pixclock	= 0,
-};
-
-static const unsigned int aspenite_matrix_key_map[] = {
-	KEY(0, 6, KEY_UP),	/* SW 4 */
-	KEY(0, 7, KEY_DOWN),	/* SW 5 */
-	KEY(1, 6, KEY_LEFT),	/* SW 6 */
-	KEY(1, 7, KEY_RIGHT),	/* SW 7 */
-	KEY(4, 6, KEY_ENTER),	/* SW 8 */
-	KEY(4, 7, KEY_ESC),	/* SW 9 */
-};
-
-static struct matrix_keymap_data aspenite_matrix_keymap_data = {
-	.keymap			= aspenite_matrix_key_map,
-	.keymap_size		= ARRAY_SIZE(aspenite_matrix_key_map),
-};
-
-static struct pxa27x_keypad_platform_data aspenite_keypad_info __initdata = {
-	.matrix_key_rows	= 5,
-	.matrix_key_cols	= 8,
-	.matrix_keymap_data	= &aspenite_matrix_keymap_data,
-	.debounce_interval	= 30,
-};
-
-#if IS_ENABLED(CONFIG_USB_EHCI_MV)
-static struct mv_usb_platform_data pxa168_sph_pdata = {
-	.mode           = MV_USB_MODE_HOST,
-	.phy_init	= pxa_usb_phy_init,
-	.phy_deinit	= pxa_usb_phy_deinit,
-	.set_vbus	= NULL,
-};
-#endif
-
-static void __init common_init(void)
-{
-	mfp_config(ARRAY_AND_SIZE(common_pin_config));
-
-	/* on-chip devices */
-	pxa168_add_uart(1);
-	pxa168_add_twsi(1, NULL, ARRAY_AND_SIZE(aspenite_i2c_info));
-	pxa168_add_ssp(1);
-	pxa168_add_nand(&aspenite_nand_info);
-	pxa168_add_fb(&aspenite_lcd_info);
-	pxa168_add_keypad(&aspenite_keypad_info);
-	platform_device_add_data(&pxa168_device_gpio, &pxa168_gpio_pdata,
-				 sizeof(struct pxa_gpio_platform_data));
-	platform_device_register(&pxa168_device_gpio);
-
-	/* off-chip devices */
-	platform_device_register(&smc91x_device);
-
-#if IS_ENABLED(CONFIG_USB_SUPPORT)
-#if IS_ENABLED(CONFIG_PHY_PXA_USB)
-	platform_device_register(&pxa168_device_usb_phy);
-#endif
-
-#if IS_ENABLED(CONFIG_USB_EHCI_MV)
-	pxa168_add_usb_host(&pxa168_sph_pdata);
-#endif
-#endif
-}
-
-MACHINE_START(ASPENITE, "PXA168-based Aspenite Development Platform")
-	.map_io		= mmp_map_io,
-	.nr_irqs	= MMP_NR_IRQS,
-	.init_irq       = pxa168_init_irq,
-	.init_time	= pxa168_timer_init,
-	.init_machine   = common_init,
-	.restart	= pxa168_restart,
-MACHINE_END
-
-MACHINE_START(ZYLONITE2, "PXA168-based Zylonite2 Development Platform")
-	.map_io		= mmp_map_io,
-	.nr_irqs	= MMP_NR_IRQS,
-	.init_irq       = pxa168_init_irq,
-	.init_time	= pxa168_timer_init,
-	.init_machine   = common_init,
-	.restart	= pxa168_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mmp/avengers_lite.c b/arch/arm/mach-mmp/avengers_lite.c
deleted file mode 100644
index 12e5a9441df9..000000000000
--- a/arch/arm/mach-mmp/avengers_lite.c
+++ /dev/null
@@ -1,55 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-mmp/avengers_lite.c
- *
- *  Support for the Marvell PXA168-based Avengers lite Development Platform.
- *
- *  Copyright (C) 2009-2010 Marvell International Ltd.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/gpio-pxa.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include "addr-map.h"
-#include "mfp-pxa168.h"
-#include "pxa168.h"
-#include "irqs.h"
-
-
-#include "common.h"
-#include <linux/delay.h>
-
-/* Avengers lite MFP configurations */
-static unsigned long avengers_lite_pin_config_V16F[] __initdata = {
-	/* DEBUG_UART */
-	GPIO88_UART2_TXD,
-	GPIO89_UART2_RXD,
-};
-
-static struct pxa_gpio_platform_data pxa168_gpio_pdata = {
-	.irq_base	= MMP_GPIO_TO_IRQ(0),
-};
-
-static void __init avengers_lite_init(void)
-{
-	mfp_config(ARRAY_AND_SIZE(avengers_lite_pin_config_V16F));
-
-	/* on-chip devices */
-	pxa168_add_uart(2);
-	platform_device_add_data(&pxa168_device_gpio, &pxa168_gpio_pdata,
-				 sizeof(struct pxa_gpio_platform_data));
-	platform_device_register(&pxa168_device_gpio);
-}
-
-MACHINE_START(AVENGERS_LITE, "PXA168 Avengers lite Development Platform")
-	.map_io		= mmp_map_io,
-	.nr_irqs	= MMP_NR_IRQS,
-	.init_irq       = pxa168_init_irq,
-	.init_time	= pxa168_timer_init,
-	.init_machine   = avengers_lite_init,
-	.restart	= pxa168_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mmp/brownstone.c b/arch/arm/mach-mmp/brownstone.c
deleted file mode 100644
index ce93bc395546..000000000000
--- a/arch/arm/mach-mmp/brownstone.c
+++ /dev/null
@@ -1,237 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-mmp/brownstone.c
- *
- *  Support for the Marvell Brownstone Development Platform.
- *
- *  Copyright (C) 2009-2010 Marvell International Ltd.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/gpio-pxa.h>
-#include <linux/gpio/machine.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/max8649.h>
-#include <linux/regulator/fixed.h>
-#include <linux/mfd/max8925.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include "addr-map.h"
-#include "mfp-mmp2.h"
-#include "mmp2.h"
-#include "irqs.h"
-
-#include "common.h"
-
-#define BROWNSTONE_NR_IRQS	(MMP_NR_IRQS + 40)
-
-#define GPIO_5V_ENABLE		(89)
-
-static unsigned long brownstone_pin_config[] __initdata = {
-	/* UART1 */
-	GPIO29_UART1_RXD,
-	GPIO30_UART1_TXD,
-
-	/* UART3 */
-	GPIO51_UART3_RXD,
-	GPIO52_UART3_TXD,
-
-	/* DFI */
-	GPIO168_DFI_D0,
-	GPIO167_DFI_D1,
-	GPIO166_DFI_D2,
-	GPIO165_DFI_D3,
-	GPIO107_DFI_D4,
-	GPIO106_DFI_D5,
-	GPIO105_DFI_D6,
-	GPIO104_DFI_D7,
-	GPIO111_DFI_D8,
-	GPIO164_DFI_D9,
-	GPIO163_DFI_D10,
-	GPIO162_DFI_D11,
-	GPIO161_DFI_D12,
-	GPIO110_DFI_D13,
-	GPIO109_DFI_D14,
-	GPIO108_DFI_D15,
-	GPIO143_ND_nCS0,
-	GPIO144_ND_nCS1,
-	GPIO147_ND_nWE,
-	GPIO148_ND_nRE,
-	GPIO150_ND_ALE,
-	GPIO149_ND_CLE,
-	GPIO112_ND_RDY0,
-	GPIO160_ND_RDY1,
-
-	/* PMIC */
-	PMIC_PMIC_INT | MFP_LPM_EDGE_FALL,
-
-	/* MMC0 */
-	GPIO131_MMC1_DAT3 | MFP_PULL_HIGH,
-	GPIO132_MMC1_DAT2 | MFP_PULL_HIGH,
-	GPIO133_MMC1_DAT1 | MFP_PULL_HIGH,
-	GPIO134_MMC1_DAT0 | MFP_PULL_HIGH,
-	GPIO136_MMC1_CMD | MFP_PULL_HIGH,
-	GPIO139_MMC1_CLK,
-	GPIO140_MMC1_CD | MFP_PULL_LOW,
-	GPIO141_MMC1_WP | MFP_PULL_LOW,
-
-	/* MMC1 */
-	GPIO37_MMC2_DAT3 | MFP_PULL_HIGH,
-	GPIO38_MMC2_DAT2 | MFP_PULL_HIGH,
-	GPIO39_MMC2_DAT1 | MFP_PULL_HIGH,
-	GPIO40_MMC2_DAT0 | MFP_PULL_HIGH,
-	GPIO41_MMC2_CMD | MFP_PULL_HIGH,
-	GPIO42_MMC2_CLK,
-
-	/* MMC2 */
-	GPIO165_MMC3_DAT7 | MFP_PULL_HIGH,
-	GPIO162_MMC3_DAT6 | MFP_PULL_HIGH,
-	GPIO166_MMC3_DAT5 | MFP_PULL_HIGH,
-	GPIO163_MMC3_DAT4 | MFP_PULL_HIGH,
-	GPIO167_MMC3_DAT3 | MFP_PULL_HIGH,
-	GPIO164_MMC3_DAT2 | MFP_PULL_HIGH,
-	GPIO168_MMC3_DAT1 | MFP_PULL_HIGH,
-	GPIO111_MMC3_DAT0 | MFP_PULL_HIGH,
-	GPIO112_MMC3_CMD | MFP_PULL_HIGH,
-	GPIO151_MMC3_CLK,
-
-	/* 5V regulator */
-	GPIO89_GPIO,
-};
-
-static struct pxa_gpio_platform_data mmp2_gpio_pdata = {
-	.irq_base	= MMP_GPIO_TO_IRQ(0),
-};
-
-static struct regulator_consumer_supply max8649_supply[] = {
-	REGULATOR_SUPPLY("vcc_core", NULL),
-};
-
-static struct regulator_init_data max8649_init_data = {
-	.constraints	= {
-		.name		= "vcc_core range",
-		.min_uV		= 1150000,
-		.max_uV		= 1280000,
-		.always_on	= 1,
-		.boot_on	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &max8649_supply[0],
-};
-
-static struct max8649_platform_data brownstone_max8649_info = {
-	.mode		= 2,	/* VID1 = 1, VID0 = 0 */
-	.extclk		= 0,
-	.ramp_timing	= MAX8649_RAMP_32MV,
-	.regulator	= &max8649_init_data,
-};
-
-static struct regulator_consumer_supply brownstone_v_5vp_supplies[] = {
-	REGULATOR_SUPPLY("v_5vp", NULL),
-};
-
-static struct regulator_init_data brownstone_v_5vp_data = {
-	.constraints	= {
-		.valid_ops_mask		= REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(brownstone_v_5vp_supplies),
-	.consumer_supplies	= brownstone_v_5vp_supplies,
-};
-
-static struct fixed_voltage_config brownstone_v_5vp = {
-	.supply_name		= "v_5vp",
-	.microvolts		= 5000000,
-	.enabled_at_boot	= 1,
-	.init_data		= &brownstone_v_5vp_data,
-};
-
-static struct platform_device brownstone_v_5vp_device = {
-	.name		= "reg-fixed-voltage",
-	.id		= 1,
-	.dev = {
-		.platform_data = &brownstone_v_5vp,
-	},
-};
-
-static struct gpiod_lookup_table brownstone_v_5vp_gpiod_table = {
-	.dev_id = "reg-fixed-voltage.1", /* .id set to 1 above */
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO_5V_ENABLE,
-			    NULL, GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct max8925_platform_data brownstone_max8925_info = {
-	.irq_base		= MMP_NR_IRQS,
-};
-
-static struct i2c_board_info brownstone_twsi1_info[] = {
-	[0] = {
-		.type		= "max8649",
-		.addr		= 0x60,
-		.platform_data	= &brownstone_max8649_info,
-	},
-	[1] = {
-		.type		= "max8925",
-		.addr		= 0x3c,
-		.irq		= IRQ_MMP2_PMIC,
-		.platform_data	= &brownstone_max8925_info,
-	},
-};
-
-static struct sdhci_pxa_platdata mmp2_sdh_platdata_mmc0 = {
-	.clk_delay_cycles = 0x1f,
-};
-
-static struct sdhci_pxa_platdata mmp2_sdh_platdata_mmc2 = {
-	.clk_delay_cycles = 0x1f,
-	.flags = PXA_FLAG_CARD_PERMANENT
-		| PXA_FLAG_SD_8_BIT_CAPABLE_SLOT,
-};
-
-static struct sram_platdata mmp2_asram_platdata = {
-	.pool_name	= "asram",
-	.granularity	= SRAM_GRANULARITY,
-};
-
-static struct sram_platdata mmp2_isram_platdata = {
-	.pool_name	= "isram",
-	.granularity	= SRAM_GRANULARITY,
-};
-
-static void __init brownstone_init(void)
-{
-	mfp_config(ARRAY_AND_SIZE(brownstone_pin_config));
-
-	/* on-chip devices */
-	mmp2_add_uart(1);
-	mmp2_add_uart(3);
-	platform_device_add_data(&mmp2_device_gpio, &mmp2_gpio_pdata,
-				 sizeof(struct pxa_gpio_platform_data));
-	platform_device_register(&mmp2_device_gpio);
-	mmp2_add_twsi(1, NULL, ARRAY_AND_SIZE(brownstone_twsi1_info));
-	mmp2_add_sdhost(0, &mmp2_sdh_platdata_mmc0); /* SD/MMC */
-	mmp2_add_sdhost(2, &mmp2_sdh_platdata_mmc2); /* eMMC */
-	mmp2_add_asram(&mmp2_asram_platdata);
-	mmp2_add_isram(&mmp2_isram_platdata);
-
-	/* enable 5v regulator */
-	gpiod_add_lookup_table(&brownstone_v_5vp_gpiod_table);
-	platform_device_register(&brownstone_v_5vp_device);
-}
-
-MACHINE_START(BROWNSTONE, "Brownstone Development Platform")
-	/* Maintainer: Haojian Zhuang <haojian.zhuang@marvell.com> */
-	.map_io		= mmp_map_io,
-	.nr_irqs	= BROWNSTONE_NR_IRQS,
-	.init_irq	= mmp2_init_irq,
-	.init_time	= mmp2_timer_init,
-	.init_machine	= brownstone_init,
-	.restart	= mmp_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mmp/flint.c b/arch/arm/mach-mmp/flint.c
deleted file mode 100644
index 9a7054368e55..000000000000
--- a/arch/arm/mach-mmp/flint.c
+++ /dev/null
@@ -1,131 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-mmp/flint.c
- *
- *  Support for the Marvell Flint Development Platform.
- *
- *  Copyright (C) 2009 Marvell International Ltd.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/smc91x.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/gpio-pxa.h>
-#include <linux/interrupt.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include "addr-map.h"
-#include "mfp-mmp2.h"
-#include "mmp2.h"
-#include "irqs.h"
-
-#include "common.h"
-
-#define FLINT_NR_IRQS	(MMP_NR_IRQS + 48)
-
-static unsigned long flint_pin_config[] __initdata = {
-	/* UART1 */
-	GPIO45_UART1_RXD,
-	GPIO46_UART1_TXD,
-
-	/* UART2 */
-	GPIO47_UART2_RXD,
-	GPIO48_UART2_TXD,
-
-	/* SMC */
-	GPIO151_SMC_SCLK,
-	GPIO145_SMC_nCS0,
-	GPIO146_SMC_nCS1,
-	GPIO152_SMC_BE0,
-	GPIO153_SMC_BE1,
-	GPIO154_SMC_IRQ,
-	GPIO113_SMC_RDY,
-
-	/*Ethernet*/
-	GPIO155_GPIO,
-
-	/* DFI */
-	GPIO168_DFI_D0,
-	GPIO167_DFI_D1,
-	GPIO166_DFI_D2,
-	GPIO165_DFI_D3,
-	GPIO107_DFI_D4,
-	GPIO106_DFI_D5,
-	GPIO105_DFI_D6,
-	GPIO104_DFI_D7,
-	GPIO111_DFI_D8,
-	GPIO164_DFI_D9,
-	GPIO163_DFI_D10,
-	GPIO162_DFI_D11,
-	GPIO161_DFI_D12,
-	GPIO110_DFI_D13,
-	GPIO109_DFI_D14,
-	GPIO108_DFI_D15,
-	GPIO143_ND_nCS0,
-	GPIO144_ND_nCS1,
-	GPIO147_ND_nWE,
-	GPIO148_ND_nRE,
-	GPIO150_ND_ALE,
-	GPIO149_ND_CLE,
-	GPIO112_ND_RDY0,
-	GPIO160_ND_RDY1,
-};
-
-static struct pxa_gpio_platform_data mmp2_gpio_pdata = {
-	.irq_base	= MMP_GPIO_TO_IRQ(0),
-};
-
-static struct smc91x_platdata flint_smc91x_info = {
-	.flags  = SMC91X_USE_16BIT | SMC91X_NOWAIT,
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start  = SMC_CS1_PHYS_BASE + 0x300,
-		.end    = SMC_CS1_PHYS_BASE + 0xfffff,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = MMP_GPIO_TO_IRQ(155),
-		.end    = MMP_GPIO_TO_IRQ(155),
-		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-static struct platform_device smc91x_device = {
-	.name           = "smc91x",
-	.id             = 0,
-	.dev            = {
-		.platform_data = &flint_smc91x_info,
-	},
-	.num_resources  = ARRAY_SIZE(smc91x_resources),
-	.resource       = smc91x_resources,
-};
-
-static void __init flint_init(void)
-{
-	mfp_config(ARRAY_AND_SIZE(flint_pin_config));
-
-	/* on-chip devices */
-	mmp2_add_uart(1);
-	mmp2_add_uart(2);
-	platform_device_add_data(&mmp2_device_gpio, &mmp2_gpio_pdata,
-				 sizeof(struct pxa_gpio_platform_data));
-	platform_device_register(&mmp2_device_gpio);
-
-	/* off-chip devices */
-	platform_device_register(&smc91x_device);
-}
-
-MACHINE_START(FLINT, "Flint Development Platform")
-	.map_io		= mmp_map_io,
-	.nr_irqs	= FLINT_NR_IRQS,
-	.init_irq       = mmp2_init_irq,
-	.init_time	= mmp2_timer_init,
-	.init_machine   = flint_init,
-	.restart	= mmp_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c
deleted file mode 100644
index 5888b71944b8..000000000000
--- a/arch/arm/mach-mmp/gplugd.c
+++ /dev/null
@@ -1,206 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-mmp/gplugd.c
- *
- *  Support for the Marvell PXA168-based GuruPlug Display (gplugD) Platform.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/gpio-pxa.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include "irqs.h"
-#include "pxa168.h"
-#include "mfp-pxa168.h"
-
-#include "common.h"
-
-static unsigned long gplugd_pin_config[] __initdata = {
-	/* UART3 */
-	GPIO8_UART3_TXD,
-	GPIO9_UART3_RXD,
-	GPIO1O_UART3_CTS,
-	GPIO11_UART3_RTS,
-
-	/* USB OTG PEN */
-	GPIO18_GPIO,
-
-	/* MMC2 */
-	GPIO28_MMC2_CMD,
-	GPIO29_MMC2_CLK,
-	GPIO30_MMC2_DAT0,
-	GPIO31_MMC2_DAT1,
-	GPIO32_MMC2_DAT2,
-	GPIO33_MMC2_DAT3,
-
-	/* LCD & HDMI clock selection GPIO: 0: 74.176MHz, 1: 74.25 MHz */
-	GPIO35_GPIO,
-	GPIO36_GPIO, /* CEC Interrupt */
-
-	/* MMC1 */
-	GPIO43_MMC1_CLK,
-	GPIO49_MMC1_CMD,
-	GPIO41_MMC1_DAT0,
-	GPIO40_MMC1_DAT1,
-	GPIO52_MMC1_DAT2,
-	GPIO51_MMC1_DAT3,
-	GPIO53_MMC1_CD,
-
-	/* LCD */
-	GPIO56_LCD_FCLK_RD,
-	GPIO57_LCD_LCLK_A0,
-	GPIO58_LCD_PCLK_WR,
-	GPIO59_LCD_DENA_BIAS,
-	GPIO60_LCD_DD0,
-	GPIO61_LCD_DD1,
-	GPIO62_LCD_DD2,
-	GPIO63_LCD_DD3,
-	GPIO64_LCD_DD4,
-	GPIO65_LCD_DD5,
-	GPIO66_LCD_DD6,
-	GPIO67_LCD_DD7,
-	GPIO68_LCD_DD8,
-	GPIO69_LCD_DD9,
-	GPIO70_LCD_DD10,
-	GPIO71_LCD_DD11,
-	GPIO72_LCD_DD12,
-	GPIO73_LCD_DD13,
-	GPIO74_LCD_DD14,
-	GPIO75_LCD_DD15,
-	GPIO76_LCD_DD16,
-	GPIO77_LCD_DD17,
-	GPIO78_LCD_DD18,
-	GPIO79_LCD_DD19,
-	GPIO80_LCD_DD20,
-	GPIO81_LCD_DD21,
-	GPIO82_LCD_DD22,
-	GPIO83_LCD_DD23,
-
-	/* GPIO */
-	GPIO84_GPIO,
-	GPIO85_GPIO,
-
-	/* Fast-Ethernet*/
-	GPIO86_TX_CLK,
-	GPIO87_TX_EN,
-	GPIO88_TX_DQ3,
-	GPIO89_TX_DQ2,
-	GPIO90_TX_DQ1,
-	GPIO91_TX_DQ0,
-	GPIO92_MII_CRS,
-	GPIO93_MII_COL,
-	GPIO94_RX_CLK,
-	GPIO95_RX_ER,
-	GPIO96_RX_DQ3,
-	GPIO97_RX_DQ2,
-	GPIO98_RX_DQ1,
-	GPIO99_RX_DQ0,
-	GPIO100_MII_MDC,
-	GPIO101_MII_MDIO,
-	GPIO103_RX_DV,
-	GPIO104_GPIO,     /* Reset PHY */
-
-	/* RTC interrupt */
-	GPIO102_GPIO,
-
-	/* I2C */
-	GPIO105_CI2C_SDA,
-	GPIO106_CI2C_SCL,
-
-	/* SPI NOR Flash on SSP2 */
-	GPIO107_SSP2_RXD,
-	GPIO108_SSP2_TXD,
-	GPIO110_GPIO,     /* SPI_CSn */
-	GPIO111_SSP2_CLK,
-
-	/* Select JTAG */
-	GPIO109_GPIO,
-
-	/* I2S */
-	GPIO114_I2S_FRM,
-	GPIO115_I2S_BCLK,
-	GPIO116_I2S_TXD
-};
-
-static struct pxa_gpio_platform_data pxa168_gpio_pdata = {
-	.irq_base	= MMP_GPIO_TO_IRQ(0),
-};
-
-static struct i2c_board_info gplugd_i2c_board_info[] = {
-	{
-		.type = "isl1208",
-		.addr = 0x6F,
-	}
-};
-
-/* Bring PHY out of reset by setting GPIO 104 */
-static int gplugd_eth_init(void)
-{
-	if (unlikely(gpio_request(104, "ETH_RESET_N"))) {
-		printk(KERN_ERR "Can't get hold of GPIO 104 to bring Ethernet "
-				"PHY out of reset\n");
-		return -EIO;
-	}
-
-	gpio_direction_output(104, 1);
-	gpio_free(104);
-	return 0;
-}
-
-struct pxa168_eth_platform_data gplugd_eth_platform_data = {
-	.port_number = 0,
-	.phy_addr    = 0,
-	.speed       = 0, /* Autonagotiation */
-	.intf        = PHY_INTERFACE_MODE_RMII,
-	.init        = gplugd_eth_init,
-};
-
-static void __init select_disp_freq(void)
-{
-	/* set GPIO 35 & clear GPIO 85 to set LCD External Clock to 74.25 MHz */
-	if (unlikely(gpio_request(35, "DISP_FREQ_SEL"))) {
-		printk(KERN_ERR "Can't get hold of GPIO 35 to select display "
-				"frequency\n");
-	} else {
-		gpio_direction_output(35, 1);
-		gpio_free(35);
-	}
-
-	if (unlikely(gpio_request(85, "DISP_FREQ_SEL_2"))) {
-		printk(KERN_ERR "Can't get hold of GPIO 85 to select display "
-				"frequency\n");
-	} else {
-		gpio_direction_output(85, 0);
-		gpio_free(85);
-	}
-}
-
-static void __init gplugd_init(void)
-{
-	mfp_config(ARRAY_AND_SIZE(gplugd_pin_config));
-
-	select_disp_freq();
-
-	/* on-chip devices */
-	pxa168_add_uart(3);
-	pxa168_add_ssp(1);
-	pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(gplugd_i2c_board_info));
-	platform_device_add_data(&pxa168_device_gpio, &pxa168_gpio_pdata,
-				 sizeof(struct pxa_gpio_platform_data));
-	platform_device_register(&pxa168_device_gpio);
-
-	pxa168_add_eth(&gplugd_eth_platform_data);
-}
-
-MACHINE_START(GPLUGD, "PXA168-based GuruPlug Display (gplugD) Platform")
-	.map_io		= mmp_map_io,
-	.nr_irqs	= MMP_NR_IRQS,
-	.init_irq       = pxa168_init_irq,
-	.init_time	= pxa168_timer_init,
-	.init_machine   = gplugd_init,
-	.restart	= pxa168_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mmp/jasper.c b/arch/arm/mach-mmp/jasper.c
deleted file mode 100644
index 2578e176fd48..000000000000
--- a/arch/arm/mach-mmp/jasper.c
+++ /dev/null
@@ -1,185 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-mmp/jasper.c
- *
- *  Support for the Marvell Jasper Development Platform.
- *
- *  Copyright (C) 2009-2010 Marvell International Ltd.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/gpio-pxa.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/max8649.h>
-#include <linux/mfd/max8925.h>
-#include <linux/interrupt.h>
-
-#include "irqs.h"
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include "addr-map.h"
-#include "mfp-mmp2.h"
-#include "mmp2.h"
-
-#include "common.h"
-
-#define JASPER_NR_IRQS		(MMP_NR_IRQS + 48)
-
-static unsigned long jasper_pin_config[] __initdata = {
-	/* UART1 */
-	GPIO29_UART1_RXD,
-	GPIO30_UART1_TXD,
-
-	/* UART3 */
-	GPIO51_UART3_RXD,
-	GPIO52_UART3_TXD,
-
-	/* DFI */
-	GPIO168_DFI_D0,
-	GPIO167_DFI_D1,
-	GPIO166_DFI_D2,
-	GPIO165_DFI_D3,
-	GPIO107_DFI_D4,
-	GPIO106_DFI_D5,
-	GPIO105_DFI_D6,
-	GPIO104_DFI_D7,
-	GPIO111_DFI_D8,
-	GPIO164_DFI_D9,
-	GPIO163_DFI_D10,
-	GPIO162_DFI_D11,
-	GPIO161_DFI_D12,
-	GPIO110_DFI_D13,
-	GPIO109_DFI_D14,
-	GPIO108_DFI_D15,
-	GPIO143_ND_nCS0,
-	GPIO144_ND_nCS1,
-	GPIO147_ND_nWE,
-	GPIO148_ND_nRE,
-	GPIO150_ND_ALE,
-	GPIO149_ND_CLE,
-	GPIO112_ND_RDY0,
-	GPIO160_ND_RDY1,
-
-	/* PMIC */
-	PMIC_PMIC_INT | MFP_LPM_EDGE_FALL,
-
-	/* MMC1 */
-	GPIO131_MMC1_DAT3,
-	GPIO132_MMC1_DAT2,
-	GPIO133_MMC1_DAT1,
-	GPIO134_MMC1_DAT0,
-	GPIO136_MMC1_CMD,
-	GPIO139_MMC1_CLK,
-	GPIO140_MMC1_CD,
-	GPIO141_MMC1_WP,
-
-	/* MMC2 */
-	GPIO37_MMC2_DAT3,
-	GPIO38_MMC2_DAT2,
-	GPIO39_MMC2_DAT1,
-	GPIO40_MMC2_DAT0,
-	GPIO41_MMC2_CMD,
-	GPIO42_MMC2_CLK,
-
-	/* MMC3 */
-	GPIO165_MMC3_DAT7,
-	GPIO162_MMC3_DAT6,
-	GPIO166_MMC3_DAT5,
-	GPIO163_MMC3_DAT4,
-	GPIO167_MMC3_DAT3,
-	GPIO164_MMC3_DAT2,
-	GPIO168_MMC3_DAT1,
-	GPIO111_MMC3_DAT0,
-	GPIO112_MMC3_CMD,
-	GPIO151_MMC3_CLK,
-};
-
-static struct pxa_gpio_platform_data mmp2_gpio_pdata = {
-	.irq_base	= MMP_GPIO_TO_IRQ(0),
-};
-
-static struct regulator_consumer_supply max8649_supply[] = {
-	REGULATOR_SUPPLY("vcc_core", NULL),
-};
-
-static struct regulator_init_data max8649_init_data = {
-	.constraints	= {
-		.name		= "vcc_core range",
-		.min_uV		= 1150000,
-		.max_uV		= 1280000,
-		.always_on	= 1,
-		.boot_on	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &max8649_supply[0],
-};
-
-static struct max8649_platform_data jasper_max8649_info = {
-	.mode		= 2,	/* VID1 = 1, VID0 = 0 */
-	.extclk		= 0,
-	.ramp_timing	= MAX8649_RAMP_32MV,
-	.regulator	= &max8649_init_data,
-};
-
-static struct max8925_backlight_pdata jasper_backlight_data = {
-	.dual_string	= 0,
-};
-
-static struct max8925_power_pdata jasper_power_data = {
-	.batt_detect		= 0,	/* can't detect battery by ID pin */
-	.topoff_threshold	= MAX8925_TOPOFF_THR_10PER,
-	.fast_charge		= MAX8925_FCHG_1000MA,
-};
-
-static struct max8925_platform_data jasper_max8925_info = {
-	.backlight		= &jasper_backlight_data,
-	.power			= &jasper_power_data,
-	.irq_base		= MMP_NR_IRQS,
-};
-
-static struct i2c_board_info jasper_twsi1_info[] = {
-	[0] = {
-		.type		= "max8649",
-		.addr		= 0x60,
-		.platform_data	= &jasper_max8649_info,
-	},
-	[1] = {
-		.type		= "max8925",
-		.addr		= 0x3c,
-		.irq		= IRQ_MMP2_PMIC,
-		.platform_data	= &jasper_max8925_info,
-	},
-};
-
-static struct sdhci_pxa_platdata mmp2_sdh_platdata_mmc0 = {
-	.clk_delay_cycles = 0x1f,
-};
-
-static void __init jasper_init(void)
-{
-	mfp_config(ARRAY_AND_SIZE(jasper_pin_config));
-
-	/* on-chip devices */
-	mmp2_add_uart(1);
-	mmp2_add_uart(3);
-	mmp2_add_twsi(1, NULL, ARRAY_AND_SIZE(jasper_twsi1_info));
-	platform_device_add_data(&mmp2_device_gpio, &mmp2_gpio_pdata,
-				 sizeof(struct pxa_gpio_platform_data));
-	platform_device_register(&mmp2_device_gpio);
-	mmp2_add_sdhost(0, &mmp2_sdh_platdata_mmc0); /* SD/MMC */
-
-	regulator_has_full_constraints();
-}
-
-MACHINE_START(MARVELL_JASPER, "Jasper Development Platform")
-	.map_io		= mmp_map_io,
-	.nr_irqs	= JASPER_NR_IRQS,
-	.init_irq       = mmp2_init_irq,
-	.init_time	= mmp2_timer_init,
-	.init_machine   = jasper_init,
-	.restart	= mmp_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mmp/mfp-mmp2.h b/arch/arm/mach-mmp/mfp-mmp2.h
deleted file mode 100644
index 1620222981e3..000000000000
--- a/arch/arm/mach-mmp/mfp-mmp2.h
+++ /dev/null
@@ -1,396 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_MACH_MFP_MMP2_H
-#define __ASM_MACH_MFP_MMP2_H
-
-#include "mfp.h"
-
-#define MFP_DRIVE_VERY_SLOW	(0x0 << 13)
-#define MFP_DRIVE_SLOW		(0x2 << 13)
-#define MFP_DRIVE_MEDIUM	(0x4 << 13)
-#define MFP_DRIVE_FAST		(0x6 << 13)
-
-/* GPIO */
-#define GPIO0_GPIO	MFP_CFG(GPIO0, AF0)
-#define GPIO1_GPIO	MFP_CFG(GPIO1, AF0)
-#define GPIO2_GPIO	MFP_CFG(GPIO2, AF0)
-#define GPIO3_GPIO	MFP_CFG(GPIO3, AF0)
-#define GPIO4_GPIO	MFP_CFG(GPIO4, AF0)
-#define GPIO5_GPIO	MFP_CFG(GPIO5, AF0)
-#define GPIO6_GPIO	MFP_CFG(GPIO6, AF0)
-#define GPIO7_GPIO	MFP_CFG(GPIO7, AF0)
-#define GPIO8_GPIO	MFP_CFG(GPIO8, AF0)
-#define GPIO9_GPIO	MFP_CFG(GPIO9, AF0)
-#define GPIO10_GPIO	MFP_CFG(GPIO10, AF0)
-#define GPIO11_GPIO	MFP_CFG(GPIO11, AF0)
-#define GPIO12_GPIO	MFP_CFG(GPIO12, AF0)
-#define GPIO13_GPIO	MFP_CFG(GPIO13, AF0)
-#define GPIO14_GPIO	MFP_CFG(GPIO14, AF0)
-#define GPIO15_GPIO	MFP_CFG(GPIO15, AF0)
-#define GPIO16_GPIO	MFP_CFG(GPIO16, AF0)
-#define GPIO17_GPIO	MFP_CFG(GPIO17, AF0)
-#define GPIO18_GPIO	MFP_CFG(GPIO18, AF0)
-#define GPIO19_GPIO	MFP_CFG(GPIO19, AF0)
-#define GPIO20_GPIO	MFP_CFG(GPIO20, AF0)
-#define GPIO21_GPIO	MFP_CFG(GPIO21, AF0)
-#define GPIO22_GPIO	MFP_CFG(GPIO22, AF0)
-#define GPIO23_GPIO	MFP_CFG(GPIO23, AF0)
-#define GPIO24_GPIO	MFP_CFG(GPIO24, AF0)
-#define GPIO25_GPIO	MFP_CFG(GPIO25, AF0)
-#define GPIO26_GPIO	MFP_CFG(GPIO26, AF0)
-#define GPIO27_GPIO	MFP_CFG(GPIO27, AF0)
-#define GPIO28_GPIO	MFP_CFG(GPIO28, AF0)
-#define GPIO29_GPIO	MFP_CFG(GPIO29, AF0)
-#define GPIO30_GPIO	MFP_CFG(GPIO30, AF0)
-#define GPIO31_GPIO	MFP_CFG(GPIO31, AF0)
-#define GPIO32_GPIO	MFP_CFG(GPIO32, AF0)
-#define GPIO33_GPIO	MFP_CFG(GPIO33, AF0)
-#define GPIO34_GPIO	MFP_CFG(GPIO34, AF0)
-#define GPIO35_GPIO	MFP_CFG(GPIO35, AF0)
-#define GPIO36_GPIO	MFP_CFG(GPIO36, AF0)
-#define GPIO37_GPIO	MFP_CFG(GPIO37, AF0)
-#define GPIO38_GPIO	MFP_CFG(GPIO38, AF0)
-#define GPIO39_GPIO	MFP_CFG(GPIO39, AF0)
-#define GPIO40_GPIO	MFP_CFG(GPIO40, AF0)
-#define GPIO41_GPIO	MFP_CFG(GPIO41, AF0)
-#define GPIO42_GPIO	MFP_CFG(GPIO42, AF0)
-#define GPIO43_GPIO	MFP_CFG(GPIO43, AF0)
-#define GPIO44_GPIO	MFP_CFG(GPIO44, AF0)
-#define GPIO45_GPIO	MFP_CFG(GPIO45, AF0)
-#define GPIO46_GPIO	MFP_CFG(GPIO46, AF0)
-#define GPIO47_GPIO	MFP_CFG(GPIO47, AF0)
-#define GPIO48_GPIO	MFP_CFG(GPIO48, AF0)
-#define GPIO49_GPIO	MFP_CFG(GPIO49, AF0)
-#define GPIO50_GPIO	MFP_CFG(GPIO50, AF0)
-#define GPIO51_GPIO	MFP_CFG(GPIO51, AF0)
-#define GPIO52_GPIO	MFP_CFG(GPIO52, AF0)
-#define GPIO53_GPIO	MFP_CFG(GPIO53, AF0)
-#define GPIO54_GPIO	MFP_CFG(GPIO54, AF0)
-#define GPIO55_GPIO	MFP_CFG(GPIO55, AF0)
-#define GPIO56_GPIO	MFP_CFG(GPIO56, AF0)
-#define GPIO57_GPIO	MFP_CFG(GPIO57, AF0)
-#define GPIO58_GPIO	MFP_CFG(GPIO58, AF0)
-#define GPIO59_GPIO	MFP_CFG(GPIO59, AF0)
-#define GPIO60_GPIO	MFP_CFG(GPIO60, AF0)
-#define GPIO61_GPIO	MFP_CFG(GPIO61, AF0)
-#define GPIO62_GPIO	MFP_CFG(GPIO62, AF0)
-#define GPIO63_GPIO	MFP_CFG(GPIO63, AF0)
-#define GPIO64_GPIO	MFP_CFG(GPIO64, AF0)
-#define GPIO65_GPIO	MFP_CFG(GPIO65, AF0)
-#define GPIO66_GPIO	MFP_CFG(GPIO66, AF0)
-#define GPIO67_GPIO	MFP_CFG(GPIO67, AF0)
-#define GPIO68_GPIO	MFP_CFG(GPIO68, AF0)
-#define GPIO69_GPIO	MFP_CFG(GPIO69, AF0)
-#define GPIO70_GPIO	MFP_CFG(GPIO70, AF0)
-#define GPIO71_GPIO	MFP_CFG(GPIO71, AF0)
-#define GPIO72_GPIO	MFP_CFG(GPIO72, AF0)
-#define GPIO73_GPIO	MFP_CFG(GPIO73, AF0)
-#define GPIO74_GPIO	MFP_CFG(GPIO74, AF0)
-#define GPIO75_GPIO	MFP_CFG(GPIO75, AF0)
-#define GPIO76_GPIO	MFP_CFG(GPIO76, AF0)
-#define GPIO77_GPIO	MFP_CFG(GPIO77, AF0)
-#define GPIO78_GPIO	MFP_CFG(GPIO78, AF0)
-#define GPIO79_GPIO	MFP_CFG(GPIO79, AF0)
-#define GPIO80_GPIO	MFP_CFG(GPIO80, AF0)
-#define GPIO81_GPIO	MFP_CFG(GPIO81, AF0)
-#define GPIO82_GPIO	MFP_CFG(GPIO82, AF0)
-#define GPIO83_GPIO	MFP_CFG(GPIO83, AF0)
-#define GPIO84_GPIO	MFP_CFG(GPIO84, AF0)
-#define GPIO85_GPIO	MFP_CFG(GPIO85, AF0)
-#define GPIO86_GPIO	MFP_CFG(GPIO86, AF0)
-#define GPIO87_GPIO	MFP_CFG(GPIO87, AF0)
-#define GPIO88_GPIO	MFP_CFG(GPIO88, AF0)
-#define GPIO89_GPIO	MFP_CFG(GPIO89, AF0)
-#define GPIO90_GPIO	MFP_CFG(GPIO90, AF0)
-#define GPIO91_GPIO	MFP_CFG(GPIO91, AF0)
-#define GPIO92_GPIO	MFP_CFG(GPIO92, AF0)
-#define GPIO93_GPIO	MFP_CFG(GPIO93, AF0)
-#define GPIO94_GPIO	MFP_CFG(GPIO94, AF0)
-#define GPIO95_GPIO	MFP_CFG(GPIO95, AF0)
-#define GPIO96_GPIO	MFP_CFG(GPIO96, AF0)
-#define GPIO97_GPIO	MFP_CFG(GPIO97, AF0)
-#define GPIO98_GPIO	MFP_CFG(GPIO98, AF0)
-#define GPIO99_GPIO	MFP_CFG(GPIO99, AF0)
-#define GPIO100_GPIO	MFP_CFG(GPIO100, AF0)
-#define GPIO101_GPIO	MFP_CFG(GPIO101, AF0)
-#define GPIO102_GPIO	MFP_CFG(GPIO102, AF1)
-#define GPIO103_GPIO	MFP_CFG(GPIO103, AF1)
-#define GPIO104_GPIO	MFP_CFG(GPIO104, AF1)
-#define GPIO105_GPIO	MFP_CFG(GPIO105, AF1)
-#define GPIO106_GPIO	MFP_CFG(GPIO106, AF1)
-#define GPIO107_GPIO	MFP_CFG(GPIO107, AF1)
-#define GPIO108_GPIO	MFP_CFG(GPIO108, AF1)
-#define GPIO109_GPIO	MFP_CFG(GPIO109, AF1)
-#define GPIO110_GPIO	MFP_CFG(GPIO110, AF1)
-#define GPIO111_GPIO	MFP_CFG(GPIO111, AF1)
-#define GPIO112_GPIO	MFP_CFG(GPIO112, AF1)
-#define GPIO113_GPIO	MFP_CFG(GPIO113, AF1)
-#define GPIO114_GPIO	MFP_CFG(GPIO114, AF0)
-#define GPIO115_GPIO	MFP_CFG(GPIO115, AF0)
-#define GPIO116_GPIO	MFP_CFG(GPIO116, AF0)
-#define GPIO117_GPIO	MFP_CFG(GPIO117, AF0)
-#define GPIO118_GPIO	MFP_CFG(GPIO118, AF0)
-#define GPIO119_GPIO	MFP_CFG(GPIO119, AF0)
-#define GPIO120_GPIO	MFP_CFG(GPIO120, AF0)
-#define GPIO121_GPIO	MFP_CFG(GPIO121, AF0)
-#define GPIO122_GPIO	MFP_CFG(GPIO122, AF0)
-#define GPIO123_GPIO	MFP_CFG(GPIO123, AF0)
-#define GPIO124_GPIO	MFP_CFG(GPIO124, AF0)
-#define GPIO125_GPIO	MFP_CFG(GPIO125, AF0)
-#define GPIO126_GPIO	MFP_CFG(GPIO126, AF0)
-#define GPIO127_GPIO	MFP_CFG(GPIO127, AF0)
-#define GPIO128_GPIO	MFP_CFG(GPIO128, AF0)
-#define GPIO129_GPIO	MFP_CFG(GPIO129, AF0)
-#define GPIO130_GPIO	MFP_CFG(GPIO130, AF0)
-#define GPIO131_GPIO	MFP_CFG(GPIO131, AF0)
-#define GPIO132_GPIO	MFP_CFG(GPIO132, AF0)
-#define GPIO133_GPIO	MFP_CFG(GPIO133, AF0)
-#define GPIO134_GPIO	MFP_CFG(GPIO134, AF0)
-#define GPIO135_GPIO	MFP_CFG(GPIO135, AF0)
-#define GPIO136_GPIO	MFP_CFG(GPIO136, AF0)
-#define GPIO137_GPIO	MFP_CFG(GPIO137, AF0)
-#define GPIO138_GPIO	MFP_CFG(GPIO138, AF0)
-#define GPIO139_GPIO	MFP_CFG(GPIO139, AF0)
-#define GPIO140_GPIO	MFP_CFG(GPIO140, AF0)
-#define GPIO141_GPIO	MFP_CFG(GPIO141, AF0)
-#define GPIO142_GPIO	MFP_CFG(GPIO142, AF1)
-#define GPIO143_GPIO	MFP_CFG(GPIO143, AF1)
-#define GPIO144_GPIO	MFP_CFG(GPIO144, AF1)
-#define GPIO145_GPIO	MFP_CFG(GPIO145, AF1)
-#define GPIO146_GPIO	MFP_CFG(GPIO146, AF1)
-#define GPIO147_GPIO	MFP_CFG(GPIO147, AF1)
-#define GPIO148_GPIO	MFP_CFG(GPIO148, AF1)
-#define GPIO149_GPIO	MFP_CFG(GPIO149, AF1)
-#define GPIO150_GPIO	MFP_CFG(GPIO150, AF1)
-#define GPIO151_GPIO	MFP_CFG(GPIO151, AF1)
-#define GPIO152_GPIO	MFP_CFG(GPIO152, AF1)
-#define GPIO153_GPIO	MFP_CFG(GPIO153, AF1)
-#define GPIO154_GPIO	MFP_CFG(GPIO154, AF1)
-#define GPIO155_GPIO	MFP_CFG(GPIO155, AF1)
-#define GPIO156_GPIO	MFP_CFG(GPIO156, AF1)
-#define GPIO157_GPIO	MFP_CFG(GPIO157, AF1)
-#define GPIO158_GPIO	MFP_CFG(GPIO158, AF1)
-#define GPIO159_GPIO	MFP_CFG(GPIO159, AF1)
-#define GPIO160_GPIO	MFP_CFG(GPIO160, AF1)
-#define GPIO161_GPIO	MFP_CFG(GPIO161, AF1)
-#define GPIO162_GPIO	MFP_CFG(GPIO162, AF1)
-#define GPIO163_GPIO	MFP_CFG(GPIO163, AF1)
-#define GPIO164_GPIO	MFP_CFG(GPIO164, AF1)
-#define GPIO165_GPIO	MFP_CFG(GPIO165, AF1)
-#define GPIO166_GPIO	MFP_CFG(GPIO166, AF1)
-#define GPIO167_GPIO	MFP_CFG(GPIO167, AF1)
-#define GPIO168_GPIO	MFP_CFG(GPIO168, AF1)
-
-/* DFI */
-#define GPIO108_DFI_D15		MFP_CFG(GPIO108, AF0)
-#define GPIO109_DFI_D14		MFP_CFG(GPIO109, AF0)
-#define GPIO110_DFI_D13		MFP_CFG(GPIO110, AF0)
-#define GPIO161_DFI_D12		MFP_CFG(GPIO161, AF0)
-#define GPIO162_DFI_D11		MFP_CFG(GPIO162, AF0)
-#define GPIO163_DFI_D10		MFP_CFG(GPIO163, AF0)
-#define GPIO164_DFI_D9		MFP_CFG(GPIO164, AF0)
-#define GPIO111_DFI_D8		MFP_CFG(GPIO111, AF0)
-#define GPIO104_DFI_D7		MFP_CFG(GPIO104, AF0)
-#define GPIO105_DFI_D6		MFP_CFG(GPIO105, AF0)
-#define GPIO106_DFI_D5		MFP_CFG(GPIO106, AF0)
-#define GPIO107_DFI_D4		MFP_CFG(GPIO107, AF0)
-#define GPIO165_DFI_D3		MFP_CFG(GPIO165, AF0)
-#define GPIO166_DFI_D2		MFP_CFG(GPIO166, AF0)
-#define GPIO167_DFI_D1		MFP_CFG(GPIO167, AF0)
-#define GPIO168_DFI_D0		MFP_CFG(GPIO168, AF0)
-#define GPIO143_ND_nCS0		MFP_CFG(GPIO143, AF0)
-#define GPIO144_ND_nCS1		MFP_CFG(GPIO144, AF0)
-#define GPIO147_ND_nWE		MFP_CFG(GPIO147, AF0)
-#define GPIO148_ND_nRE		MFP_CFG(GPIO148, AF0)
-#define GPIO150_ND_ALE		MFP_CFG(GPIO150, AF0)
-#define GPIO149_ND_CLE		MFP_CFG(GPIO149, AF0)
-#define GPIO112_ND_RDY0		MFP_CFG(GPIO112, AF0)
-#define GPIO160_ND_RDY1		MFP_CFG(GPIO160, AF0)
-
-/* Static Memory Controller */
-#define GPIO145_SMC_nCS0	MFP_CFG(GPIO145, AF0)
-#define GPIO146_SMC_nCS1	MFP_CFG(GPIO146, AF0)
-#define GPIO152_SMC_BE0		MFP_CFG(GPIO152, AF0)
-#define GPIO153_SMC_BE1		MFP_CFG(GPIO153, AF0)
-#define GPIO154_SMC_IRQ		MFP_CFG(GPIO154, AF0)
-#define GPIO113_SMC_RDY		MFP_CFG(GPIO113, AF0)
-#define GPIO151_SMC_SCLK	MFP_CFG(GPIO151, AF0)
-
-/* Ethernet */
-#define GPIO155_SM_ADVMUX	MFP_CFG(GPIO155, AF2)
-
-/* UART1 */
-#define GPIO45_UART1_RXD	MFP_CFG(GPIO45, AF1)
-#define GPIO46_UART1_TXD	MFP_CFG(GPIO46, AF1)
-#define GPIO29_UART1_RXD	MFP_CFG(GPIO29, AF1)
-#define GPIO30_UART1_TXD	MFP_CFG(GPIO30, AF1)
-#define GPIO31_UART1_CTS	MFP_CFG(GPIO31, AF1)
-#define GPIO32_UART1_RTS	MFP_CFG(GPIO32, AF1)
-
-/* UART2 */
-#define GPIO47_UART2_RXD	MFP_CFG(GPIO47, AF1)
-#define GPIO48_UART2_TXD	MFP_CFG(GPIO48, AF1)
-#define GPIO49_UART2_CTS	MFP_CFG(GPIO49, AF1)
-#define GPIO50_UART2_RTS	MFP_CFG(GPIO50, AF1)
-
-/* UART3 */
-#define GPIO51_UART3_RXD	MFP_CFG(GPIO51, AF1)
-#define GPIO52_UART3_TXD	MFP_CFG(GPIO52, AF1)
-#define GPIO53_UART3_CTS	MFP_CFG(GPIO53, AF1)
-#define GPIO54_UART3_RTS	MFP_CFG(GPIO54, AF1)
-
-/* MMC1 */
-#define GPIO124_MMC1_DAT7	MFP_CFG_DRV(GPIO124, AF1, FAST)
-#define GPIO125_MMC1_DAT6	MFP_CFG_DRV(GPIO125, AF1, FAST)
-#define GPIO129_MMC1_DAT5	MFP_CFG_DRV(GPIO129, AF1, FAST)
-#define GPIO130_MMC1_DAT4	MFP_CFG_DRV(GPIO130, AF1, FAST)
-#define GPIO131_MMC1_DAT3	MFP_CFG_DRV(GPIO131, AF1, FAST)
-#define GPIO132_MMC1_DAT2	MFP_CFG_DRV(GPIO132, AF1, FAST)
-#define GPIO133_MMC1_DAT1	MFP_CFG_DRV(GPIO133, AF1, FAST)
-#define GPIO134_MMC1_DAT0	MFP_CFG_DRV(GPIO134, AF1, FAST)
-#define GPIO136_MMC1_CMD	MFP_CFG_DRV(GPIO136, AF1, FAST)
-#define GPIO139_MMC1_CLK	MFP_CFG_DRV(GPIO139, AF1, FAST)
-#define GPIO140_MMC1_CD		MFP_CFG_DRV(GPIO140, AF1, FAST)
-#define GPIO141_MMC1_WP		MFP_CFG_DRV(GPIO141, AF1, FAST)
-
-/*MMC2*/
-#define GPIO37_MMC2_DAT3	MFP_CFG_DRV(GPIO37, AF1, FAST)
-#define GPIO38_MMC2_DAT2	MFP_CFG_DRV(GPIO38, AF1, FAST)
-#define GPIO39_MMC2_DAT1	MFP_CFG_DRV(GPIO39, AF1, FAST)
-#define GPIO40_MMC2_DAT0	MFP_CFG_DRV(GPIO40, AF1, FAST)
-#define GPIO41_MMC2_CMD		MFP_CFG_DRV(GPIO41, AF1, FAST)
-#define GPIO42_MMC2_CLK		MFP_CFG_DRV(GPIO42, AF1, FAST)
-
-/*MMC3*/
-#define GPIO165_MMC3_DAT7	MFP_CFG_DRV(GPIO165, AF2, FAST)
-#define GPIO162_MMC3_DAT6	MFP_CFG_DRV(GPIO162, AF2, FAST)
-#define GPIO166_MMC3_DAT5	MFP_CFG_DRV(GPIO166, AF2, FAST)
-#define GPIO163_MMC3_DAT4	MFP_CFG_DRV(GPIO163, AF2, FAST)
-#define GPIO167_MMC3_DAT3	MFP_CFG_DRV(GPIO167, AF2, FAST)
-#define GPIO164_MMC3_DAT2	MFP_CFG_DRV(GPIO164, AF2, FAST)
-#define GPIO168_MMC3_DAT1	MFP_CFG_DRV(GPIO168, AF2, FAST)
-#define GPIO111_MMC3_DAT0	MFP_CFG_DRV(GPIO111, AF2, FAST)
-#define GPIO112_MMC3_CMD	MFP_CFG_DRV(GPIO112, AF2, FAST)
-#define GPIO151_MMC3_CLK	MFP_CFG_DRV(GPIO151, AF2, FAST)
-
-/* LCD */
-#define GPIO74_LCD_FCLK		MFP_CFG_DRV(GPIO74, AF1, FAST)
-#define GPIO75_LCD_LCLK		MFP_CFG_DRV(GPIO75, AF1, FAST)
-#define GPIO76_LCD_PCLK		MFP_CFG_DRV(GPIO76, AF1, FAST)
-#define GPIO77_LCD_DENA		MFP_CFG_DRV(GPIO77, AF1, FAST)
-#define GPIO78_LCD_DD0		MFP_CFG_DRV(GPIO78, AF1, FAST)
-#define GPIO79_LCD_DD1		MFP_CFG_DRV(GPIO79, AF1, FAST)
-#define GPIO80_LCD_DD2		MFP_CFG_DRV(GPIO80, AF1, FAST)
-#define GPIO81_LCD_DD3		MFP_CFG_DRV(GPIO81, AF1, FAST)
-#define GPIO82_LCD_DD4		MFP_CFG_DRV(GPIO82, AF1, FAST)
-#define GPIO83_LCD_DD5		MFP_CFG_DRV(GPIO83, AF1, FAST)
-#define GPIO84_LCD_DD6		MFP_CFG_DRV(GPIO84, AF1, FAST)
-#define GPIO85_LCD_DD7		MFP_CFG_DRV(GPIO85, AF1, FAST)
-#define GPIO86_LCD_DD8		MFP_CFG_DRV(GPIO86, AF1, FAST)
-#define GPIO87_LCD_DD9		MFP_CFG_DRV(GPIO87, AF1, FAST)
-#define GPIO88_LCD_DD10		MFP_CFG_DRV(GPIO88, AF1, FAST)
-#define GPIO89_LCD_DD11		MFP_CFG_DRV(GPIO89, AF1, FAST)
-#define GPIO90_LCD_DD12		MFP_CFG_DRV(GPIO90, AF1, FAST)
-#define GPIO91_LCD_DD13		MFP_CFG_DRV(GPIO91, AF1, FAST)
-#define GPIO92_LCD_DD14		MFP_CFG_DRV(GPIO92, AF1, FAST)
-#define GPIO93_LCD_DD15		MFP_CFG_DRV(GPIO93, AF1, FAST)
-#define GPIO94_LCD_DD16		MFP_CFG_DRV(GPIO94, AF1, FAST)
-#define GPIO95_LCD_DD17		MFP_CFG_DRV(GPIO95, AF1, FAST)
-#define GPIO96_LCD_DD18		MFP_CFG_DRV(GPIO96, AF1, FAST)
-#define GPIO97_LCD_DD19		MFP_CFG_DRV(GPIO97, AF1, FAST)
-#define GPIO98_LCD_DD20		MFP_CFG_DRV(GPIO98, AF1, FAST)
-#define GPIO99_LCD_DD21		MFP_CFG_DRV(GPIO99, AF1, FAST)
-#define GPIO100_LCD_DD22	MFP_CFG_DRV(GPIO100, AF1, FAST)
-#define GPIO101_LCD_DD23	MFP_CFG_DRV(GPIO101, AF1, FAST)
-#define GPIO94_SPI_DCLK		MFP_CFG_DRV(GPIO94, AF3, FAST)
-#define GPIO95_SPI_CS0		MFP_CFG_DRV(GPIO95, AF3, FAST)
-#define GPIO96_SPI_DIN		MFP_CFG_DRV(GPIO96, AF3, FAST)
-#define GPIO97_SPI_DOUT		MFP_CFG_DRV(GPIO97, AF3, FAST)
-#define GPIO98_LCD_RST		MFP_CFG_DRV(GPIO98, AF0, FAST)
-
-#define GPIO114_MN_CLK_OUT	MFP_CFG_DRV(GPIO114, AF1, FAST)
-
-/*LCD TV path*/
-#define GPIO124_LCD_DD24	MFP_CFG_DRV(GPIO124, AF2, FAST)
-#define GPIO125_LCD_DD25	MFP_CFG_DRV(GPIO125, AF2, FAST)
-#define GPIO126_LCD_DD33	MFP_CFG_DRV(GPIO126, AF2, FAST)
-#define GPIO127_LCD_DD26	MFP_CFG_DRV(GPIO127, AF2, FAST)
-#define GPIO128_LCD_DD27	MFP_CFG_DRV(GPIO128, AF2, FAST)
-#define GPIO129_LCD_DD28	MFP_CFG_DRV(GPIO129, AF2, FAST)
-#define GPIO130_LCD_DD29	MFP_CFG_DRV(GPIO130, AF2, FAST)
-#define GPIO135_LCD_DD30	MFP_CFG_DRV(GPIO135, AF2, FAST)
-#define GPIO137_LCD_DD31	MFP_CFG_DRV(GPIO137, AF2, FAST)
-#define GPIO138_LCD_DD32	MFP_CFG_DRV(GPIO138, AF2, FAST)
-#define GPIO140_LCD_DD34	MFP_CFG_DRV(GPIO140, AF2, FAST)
-#define GPIO141_LCD_DD35	MFP_CFG_DRV(GPIO141, AF2, FAST)
-
-/* I2C */
-#define GPIO43_TWSI2_SCL	MFP_CFG_DRV(GPIO43, AF1, SLOW)
-#define GPIO44_TWSI2_SDA	MFP_CFG_DRV(GPIO44, AF1, SLOW)
-#define GPIO71_TWSI3_SCL	MFP_CFG_DRV(GPIO71, AF1, SLOW)
-#define GPIO72_TWSI3_SDA	MFP_CFG_DRV(GPIO72, AF1, SLOW)
-#define TWSI4_SCL		MFP_CFG_DRV(TWSI4_SCL, AF0, SLOW)
-#define TWSI4_SDA		MFP_CFG_DRV(TWSI4_SDA, AF0, SLOW)
-#define GPIO99_TWSI5_SCL	MFP_CFG_DRV(GPIO99, AF4, SLOW)
-#define GPIO100_TWSI5_SDA	MFP_CFG_DRV(GPIO100, AF4, SLOW)
-#define GPIO97_TWSI6_SCL	MFP_CFG_DRV(GPIO97, AF2, SLOW)
-#define GPIO98_TWSI6_SDA	MFP_CFG_DRV(GPIO98, AF2, SLOW)
-
-/* SSPA1 */
-#define GPIO24_I2S_SYSCLK	MFP_CFG(GPIO24, AF1)
-#define GPIO25_I2S_BITCLK	MFP_CFG(GPIO25, AF1)
-#define GPIO26_I2S_SYNC		MFP_CFG(GPIO26, AF1)
-#define GPIO27_I2S_DATA_OUT	MFP_CFG(GPIO27, AF1)
-#define GPIO28_I2S_SDATA_IN	MFP_CFG(GPIO28, AF1)
-#define GPIO114_I2S_MCLK	MFP_CFG(GPIO114, AF1)
-
-/* SSPA2 */
-#define GPIO33_SSPA2_CLK	MFP_CFG(GPIO33, AF1)
-#define GPIO34_SSPA2_FRM	MFP_CFG(GPIO34, AF1)
-#define GPIO35_SSPA2_TXD	MFP_CFG(GPIO35, AF1)
-#define GPIO36_SSPA2_RXD	MFP_CFG(GPIO36, AF1)
-
-/* Keypad */
-#define GPIO00_KP_MKIN0		MFP_CFG(GPIO0, AF1)
-#define GPIO01_KP_MKOUT0	MFP_CFG(GPIO1, AF1)
-#define GPIO02_KP_MKIN1		MFP_CFG(GPIO2, AF1)
-#define GPIO03_KP_MKOUT1	MFP_CFG(GPIO3, AF1)
-#define GPIO04_KP_MKIN2		MFP_CFG(GPIO4, AF1)
-#define GPIO05_KP_MKOUT2	MFP_CFG(GPIO5, AF1)
-#define GPIO06_KP_MKIN3		MFP_CFG(GPIO6, AF1)
-#define GPIO07_KP_MKOUT3	MFP_CFG(GPIO7, AF1)
-#define GPIO08_KP_MKIN4		MFP_CFG(GPIO8, AF1)
-#define GPIO09_KP_MKOUT4	MFP_CFG(GPIO9, AF1)
-#define GPIO10_KP_MKIN5		MFP_CFG(GPIO10, AF1)
-#define GPIO11_KP_MKOUT5	MFP_CFG(GPIO11, AF1)
-#define GPIO12_KP_MKIN6		MFP_CFG(GPIO12, AF1)
-#define GPIO13_KP_MKOUT6	MFP_CFG(GPIO13, AF1)
-#define GPIO14_KP_MKIN7		MFP_CFG(GPIO14, AF1)
-#define GPIO15_KP_MKOUT7	MFP_CFG(GPIO15, AF1)
-#define GPIO16_KP_DKIN0		MFP_CFG(GPIO16, AF1)
-#define GPIO17_KP_DKIN1		MFP_CFG(GPIO17, AF1)
-#define GPIO18_KP_DKIN2		MFP_CFG(GPIO18, AF1)
-#define GPIO19_KP_DKIN3		MFP_CFG(GPIO19, AF1)
-#define GPIO20_KP_DKIN4		MFP_CFG(GPIO20, AF1)
-#define GPIO21_KP_DKIN5		MFP_CFG(GPIO21, AF1)
-#define GPIO22_KP_DKIN6		MFP_CFG(GPIO22, AF1)
-#define GPIO23_KP_DKIN7		MFP_CFG(GPIO23, AF1)
-
-/* CAMERA */
-#define GPIO59_CCIC_IN7		MFP_CFG_DRV(GPIO59, AF1, FAST)
-#define GPIO60_CCIC_IN6		MFP_CFG_DRV(GPIO60, AF1, FAST)
-#define GPIO61_CCIC_IN5		MFP_CFG_DRV(GPIO61, AF1, FAST)
-#define GPIO62_CCIC_IN4		MFP_CFG_DRV(GPIO62, AF1, FAST)
-#define GPIO63_CCIC_IN3		MFP_CFG_DRV(GPIO63, AF1, FAST)
-#define GPIO64_CCIC_IN2		MFP_CFG_DRV(GPIO64, AF1, FAST)
-#define GPIO65_CCIC_IN1		MFP_CFG_DRV(GPIO65, AF1, FAST)
-#define GPIO66_CCIC_IN0		MFP_CFG_DRV(GPIO66, AF1, FAST)
-#define GPIO67_CAM_HSYNC	MFP_CFG_DRV(GPIO67, AF1, FAST)
-#define GPIO68_CAM_VSYNC	MFP_CFG_DRV(GPIO68, AF1, FAST)
-#define GPIO69_CAM_MCLK		MFP_CFG_DRV(GPIO69, AF1, FAST)
-#define GPIO70_CAM_PCLK		MFP_CFG_DRV(GPIO70, AF1, FAST)
-
-/* PMIC */
-#define PMIC_PMIC_INT		MFP_CFG(PMIC_INT, AF0)
-
-#endif /* __ASM_MACH_MFP_MMP2_H */
-
diff --git a/arch/arm/mach-mmp/mfp-pxa168.h b/arch/arm/mach-mmp/mfp-pxa168.h
deleted file mode 100644
index 90d16d3419a4..000000000000
--- a/arch/arm/mach-mmp/mfp-pxa168.h
+++ /dev/null
@@ -1,355 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_MACH_MFP_PXA168_H
-#define __ASM_MACH_MFP_PXA168_H
-
-#include "mfp.h"
-
-#define MFP_DRIVE_VERY_SLOW	(0x0 << 13)
-#define MFP_DRIVE_SLOW		(0x1 << 13)
-#define MFP_DRIVE_MEDIUM	(0x2 << 13)
-#define MFP_DRIVE_FAST		(0x3 << 13)
-
-#undef MFP_CFG
-#undef MFP_CFG_DRV
-
-#define MFP_CFG(pin, af)		\
-	(MFP_LPM_INPUT | MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DRIVE_MEDIUM)
-
-#define MFP_CFG_DRV(pin, af, drv)	\
-	(MFP_LPM_INPUT | MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DRIVE_##drv)
-
-/* GPIO */
-#define GPIO0_GPIO		MFP_CFG(GPIO0, AF5)
-#define GPIO1_GPIO		MFP_CFG(GPIO1, AF5)
-#define GPIO2_GPIO		MFP_CFG(GPIO2, AF5)
-#define GPIO3_GPIO		MFP_CFG(GPIO3, AF5)
-#define GPIO4_GPIO		MFP_CFG(GPIO4, AF5)
-#define GPIO5_GPIO		MFP_CFG(GPIO5, AF5)
-#define GPIO6_GPIO		MFP_CFG(GPIO6, AF5)
-#define GPIO7_GPIO		MFP_CFG(GPIO7, AF5)
-#define GPIO8_GPIO		MFP_CFG(GPIO8, AF5)
-#define GPIO9_GPIO		MFP_CFG(GPIO9, AF5)
-#define GPIO10_GPIO		MFP_CFG(GPIO10, AF5)
-#define GPIO11_GPIO		MFP_CFG(GPIO11, AF5)
-#define GPIO12_GPIO		MFP_CFG(GPIO12, AF5)
-#define GPIO13_GPIO		MFP_CFG(GPIO13, AF5)
-#define GPIO14_GPIO		MFP_CFG(GPIO14, AF5)
-#define GPIO15_GPIO		MFP_CFG(GPIO15, AF5)
-#define GPIO16_GPIO		MFP_CFG(GPIO16, AF0)
-#define GPIO17_GPIO		MFP_CFG(GPIO17, AF5)
-#define GPIO18_GPIO		MFP_CFG(GPIO18, AF0)
-#define GPIO19_GPIO		MFP_CFG(GPIO19, AF5)
-#define GPIO20_GPIO		MFP_CFG(GPIO20, AF0)
-#define GPIO21_GPIO		MFP_CFG(GPIO21, AF5)
-#define GPIO22_GPIO		MFP_CFG(GPIO22, AF5)
-#define GPIO23_GPIO		MFP_CFG(GPIO23, AF5)
-#define GPIO24_GPIO		MFP_CFG(GPIO24, AF5)
-#define GPIO25_GPIO		MFP_CFG(GPIO25, AF5)
-#define GPIO26_GPIO		MFP_CFG(GPIO26, AF0)
-#define GPIO27_GPIO		MFP_CFG(GPIO27, AF5)
-#define GPIO28_GPIO		MFP_CFG(GPIO28, AF5)
-#define GPIO29_GPIO		MFP_CFG(GPIO29, AF5)
-#define GPIO30_GPIO		MFP_CFG(GPIO30, AF5)
-#define GPIO31_GPIO		MFP_CFG(GPIO31, AF5)
-#define GPIO32_GPIO		MFP_CFG(GPIO32, AF5)
-#define GPIO33_GPIO		MFP_CFG(GPIO33, AF5)
-#define GPIO34_GPIO		MFP_CFG(GPIO34, AF0)
-#define GPIO35_GPIO		MFP_CFG(GPIO35, AF0)
-#define GPIO36_GPIO		MFP_CFG(GPIO36, AF0)
-#define GPIO37_GPIO		MFP_CFG(GPIO37, AF0)
-#define GPIO38_GPIO		MFP_CFG(GPIO38, AF0)
-#define GPIO39_GPIO		MFP_CFG(GPIO39, AF0)
-#define GPIO40_GPIO		MFP_CFG(GPIO40, AF0)
-#define GPIO41_GPIO		MFP_CFG(GPIO41, AF0)
-#define GPIO42_GPIO		MFP_CFG(GPIO42, AF0)
-#define GPIO43_GPIO		MFP_CFG(GPIO43, AF0)
-#define GPIO44_GPIO		MFP_CFG(GPIO44, AF0)
-#define GPIO45_GPIO		MFP_CFG(GPIO45, AF0)
-#define GPIO46_GPIO		MFP_CFG(GPIO46, AF0)
-#define GPIO47_GPIO		MFP_CFG(GPIO47, AF0)
-#define GPIO48_GPIO		MFP_CFG(GPIO48, AF0)
-#define GPIO49_GPIO		MFP_CFG(GPIO49, AF0)
-#define GPIO50_GPIO		MFP_CFG(GPIO50, AF0)
-#define GPIO51_GPIO		MFP_CFG(GPIO51, AF0)
-#define GPIO52_GPIO		MFP_CFG(GPIO52, AF0)
-#define GPIO53_GPIO		MFP_CFG(GPIO53, AF0)
-#define GPIO54_GPIO		MFP_CFG(GPIO54, AF0)
-#define GPIO55_GPIO		MFP_CFG(GPIO55, AF0)
-#define GPIO56_GPIO		MFP_CFG(GPIO56, AF0)
-#define GPIO57_GPIO		MFP_CFG(GPIO57, AF0)
-#define GPIO58_GPIO		MFP_CFG(GPIO58, AF0)
-#define GPIO59_GPIO		MFP_CFG(GPIO59, AF0)
-#define GPIO60_GPIO		MFP_CFG(GPIO60, AF0)
-#define GPIO61_GPIO		MFP_CFG(GPIO61, AF0)
-#define GPIO62_GPIO		MFP_CFG(GPIO62, AF0)
-#define GPIO63_GPIO		MFP_CFG(GPIO63, AF0)
-#define GPIO64_GPIO		MFP_CFG(GPIO64, AF0)
-#define GPIO65_GPIO		MFP_CFG(GPIO65, AF0)
-#define GPIO66_GPIO		MFP_CFG(GPIO66, AF0)
-#define GPIO67_GPIO		MFP_CFG(GPIO67, AF0)
-#define GPIO68_GPIO		MFP_CFG(GPIO68, AF0)
-#define GPIO69_GPIO		MFP_CFG(GPIO69, AF0)
-#define GPIO70_GPIO		MFP_CFG(GPIO70, AF0)
-#define GPIO71_GPIO		MFP_CFG(GPIO71, AF0)
-#define GPIO72_GPIO		MFP_CFG(GPIO72, AF0)
-#define GPIO73_GPIO		MFP_CFG(GPIO73, AF0)
-#define GPIO74_GPIO		MFP_CFG(GPIO74, AF0)
-#define GPIO75_GPIO		MFP_CFG(GPIO75, AF0)
-#define GPIO76_GPIO		MFP_CFG(GPIO76, AF0)
-#define GPIO77_GPIO		MFP_CFG(GPIO77, AF0)
-#define GPIO78_GPIO		MFP_CFG(GPIO78, AF0)
-#define GPIO79_GPIO		MFP_CFG(GPIO79, AF0)
-#define GPIO80_GPIO		MFP_CFG(GPIO80, AF0)
-#define GPIO81_GPIO		MFP_CFG(GPIO81, AF0)
-#define GPIO82_GPIO		MFP_CFG(GPIO82, AF0)
-#define GPIO83_GPIO		MFP_CFG(GPIO83, AF0)
-#define GPIO84_GPIO		MFP_CFG(GPIO84, AF0)
-#define GPIO85_GPIO		MFP_CFG(GPIO85, AF0)
-#define GPIO86_GPIO		MFP_CFG(GPIO86, AF0)
-#define GPIO87_GPIO		MFP_CFG(GPIO87, AF0)
-#define GPIO88_GPIO		MFP_CFG(GPIO88, AF0)
-#define GPIO89_GPIO		MFP_CFG(GPIO89, AF0)
-#define GPIO90_GPIO		MFP_CFG(GPIO90, AF0)
-#define GPIO91_GPIO		MFP_CFG(GPIO91, AF0)
-#define GPIO92_GPIO		MFP_CFG(GPIO92, AF0)
-#define GPIO93_GPIO		MFP_CFG(GPIO93, AF0)
-#define GPIO94_GPIO		MFP_CFG(GPIO94, AF0)
-#define GPIO95_GPIO		MFP_CFG(GPIO95, AF0)
-#define GPIO96_GPIO		MFP_CFG(GPIO96, AF0)
-#define GPIO97_GPIO		MFP_CFG(GPIO97, AF0)
-#define GPIO98_GPIO		MFP_CFG(GPIO98, AF0)
-#define GPIO99_GPIO		MFP_CFG(GPIO99, AF0)
-#define GPIO100_GPIO		MFP_CFG(GPIO100, AF0)
-#define GPIO101_GPIO		MFP_CFG(GPIO101, AF0)
-#define GPIO102_GPIO		MFP_CFG(GPIO102, AF0)
-#define GPIO103_GPIO		MFP_CFG(GPIO103, AF0)
-#define GPIO104_GPIO		MFP_CFG(GPIO104, AF0)
-#define GPIO105_GPIO		MFP_CFG(GPIO105, AF0)
-#define GPIO106_GPIO		MFP_CFG(GPIO106, AF0)
-#define GPIO107_GPIO		MFP_CFG(GPIO107, AF0)
-#define GPIO108_GPIO		MFP_CFG(GPIO108, AF0)
-#define GPIO109_GPIO		MFP_CFG(GPIO109, AF0)
-#define GPIO110_GPIO		MFP_CFG(GPIO110, AF0)
-#define GPIO111_GPIO		MFP_CFG(GPIO111, AF0)
-#define GPIO112_GPIO		MFP_CFG(GPIO112, AF0)
-#define GPIO113_GPIO		MFP_CFG(GPIO113, AF0)
-#define GPIO114_GPIO		MFP_CFG(GPIO114, AF0)
-#define GPIO115_GPIO		MFP_CFG(GPIO115, AF0)
-#define GPIO116_GPIO		MFP_CFG(GPIO116, AF0)
-#define GPIO117_GPIO		MFP_CFG(GPIO117, AF0)
-#define GPIO118_GPIO		MFP_CFG(GPIO118, AF0)
-#define GPIO119_GPIO		MFP_CFG(GPIO119, AF0)
-#define GPIO120_GPIO		MFP_CFG(GPIO120, AF0)
-#define GPIO121_GPIO		MFP_CFG(GPIO121, AF0)
-#define GPIO122_GPIO		MFP_CFG(GPIO122, AF0)
-
-/* DFI */
-#define GPIO0_DFI_D15		MFP_CFG(GPIO0, AF0)
-#define GPIO1_DFI_D14		MFP_CFG(GPIO1, AF0)
-#define GPIO2_DFI_D13		MFP_CFG(GPIO2, AF0)
-#define GPIO3_DFI_D12		MFP_CFG(GPIO3, AF0)
-#define GPIO4_DFI_D11		MFP_CFG(GPIO4, AF0)
-#define GPIO5_DFI_D10		MFP_CFG(GPIO5, AF0)
-#define GPIO6_DFI_D9		MFP_CFG(GPIO6, AF0)
-#define GPIO7_DFI_D8		MFP_CFG(GPIO7, AF0)
-#define GPIO8_DFI_D7		MFP_CFG(GPIO8, AF0)
-#define GPIO9_DFI_D6		MFP_CFG(GPIO9, AF0)
-#define GPIO10_DFI_D5		MFP_CFG(GPIO10, AF0)
-#define GPIO11_DFI_D4		MFP_CFG(GPIO11, AF0)
-#define GPIO12_DFI_D3		MFP_CFG(GPIO12, AF0)
-#define GPIO13_DFI_D2		MFP_CFG(GPIO13, AF0)
-#define GPIO14_DFI_D1		MFP_CFG(GPIO14, AF0)
-#define GPIO15_DFI_D0		MFP_CFG(GPIO15, AF0)
-
-#define GPIO30_DFI_ADDR0	MFP_CFG(GPIO30, AF0)
-#define GPIO31_DFI_ADDR1	MFP_CFG(GPIO31, AF0)
-#define GPIO32_DFI_ADDR2	MFP_CFG(GPIO32, AF0)
-#define GPIO33_DFI_ADDR3	MFP_CFG(GPIO33, AF0)
-
-/* NAND */
-#define GPIO16_ND_nCS0		MFP_CFG(GPIO16, AF1)
-#define GPIO17_ND_nWE		MFP_CFG(GPIO17, AF0)
-#define GPIO21_ND_ALE		MFP_CFG(GPIO21, AF0)
-#define GPIO22_ND_CLE		MFP_CFG(GPIO22, AF0)
-#define GPIO24_ND_nRE		MFP_CFG(GPIO24, AF0)
-#define GPIO26_ND_RnB1		MFP_CFG(GPIO26, AF1)
-#define GPIO27_ND_RnB2		MFP_CFG(GPIO27, AF1)
-
-/* Static Memory Controller */
-#define GPIO18_SMC_nCS0		MFP_CFG(GPIO18, AF3)
-#define GPIO18_SMC_nCS1		MFP_CFG(GPIO18, AF2)
-#define GPIO16_SMC_nCS0		MFP_CFG(GPIO16, AF2)
-#define GPIO16_SMC_nCS1		MFP_CFG(GPIO16, AF3)
-#define GPIO19_SMC_nCS0		MFP_CFG(GPIO19, AF0)
-#define GPIO20_SMC_nCS1		MFP_CFG(GPIO20, AF2)
-#define GPIO23_SMC_nLUA		MFP_CFG(GPIO23, AF0)
-#define GPIO25_SMC_nLLA		MFP_CFG(GPIO25, AF0)
-#define GPIO27_SMC_IRQ		MFP_CFG(GPIO27, AF0)
-#define GPIO28_SMC_RDY		MFP_CFG(GPIO28, AF0)
-#define GPIO29_SMC_SCLK		MFP_CFG(GPIO29, AF0)
-#define GPIO34_SMC_nCS1		MFP_CFG(GPIO34, AF2)
-#define GPIO35_SMC_BE1		MFP_CFG(GPIO35, AF2)
-#define GPIO36_SMC_BE2		MFP_CFG(GPIO36, AF2)
-
-/* Compact Flash */
-#define GPIO19_CF_nCE1		MFP_CFG(GPIO19, AF3)
-#define GPIO20_CF_nCE2		MFP_CFG(GPIO20, AF3)
-#define GPIO23_CF_nALE		MFP_CFG(GPIO23, AF3)
-#define GPIO25_CF_nRESET	MFP_CFG(GPIO25, AF3)
-#define GPIO28_CF_RDY		MFP_CFG(GPIO28, AF3)
-#define GPIO29_CF_STSCH		MFP_CFG(GPIO29, AF3)
-#define GPIO30_CF_nREG		MFP_CFG(GPIO30, AF3)
-#define GPIO31_CF_nIOIS16	MFP_CFG(GPIO31, AF3)
-#define GPIO32_CF_nCD1		MFP_CFG(GPIO32, AF3)
-#define GPIO33_CF_nCD2		MFP_CFG(GPIO33, AF3)
-
-/* UART */
-#define GPIO8_UART3_TXD		MFP_CFG(GPIO8, AF2)
-#define GPIO9_UART3_RXD		MFP_CFG(GPIO9, AF2)
-#define GPIO1O_UART3_CTS	MFP_CFG(GPIO10, AF2)
-#define GPIO11_UART3_RTS	MFP_CFG(GPIO11, AF2)
-#define GPIO88_UART2_TXD	MFP_CFG(GPIO88, AF2)
-#define GPIO89_UART2_RXD	MFP_CFG(GPIO89, AF2)
-#define GPIO107_UART1_TXD	MFP_CFG_DRV(GPIO107, AF1, FAST)
-#define GPIO107_UART1_RXD	MFP_CFG_DRV(GPIO107, AF2, FAST)
-#define GPIO108_UART1_RXD	MFP_CFG_DRV(GPIO108, AF1, FAST)
-#define GPIO108_UART1_TXD	MFP_CFG_DRV(GPIO108, AF2, FAST)
-#define GPIO109_UART1_CTS	MFP_CFG(GPIO109, AF1)
-#define GPIO109_UART1_RTS	MFP_CFG(GPIO109, AF2)
-#define GPIO110_UART1_RTS	MFP_CFG(GPIO110, AF1)
-#define GPIO110_UART1_CTS	MFP_CFG(GPIO110, AF2)
-#define GPIO111_UART1_RI	MFP_CFG(GPIO111, AF1)
-#define GPIO111_UART1_DSR	MFP_CFG(GPIO111, AF2)
-#define GPIO112_UART1_DTR	MFP_CFG(GPIO111, AF1)
-#define GPIO112_UART1_DCD	MFP_CFG(GPIO112, AF2)
-
-/* MMC1 */
-#define GPIO37_MMC1_DAT7	MFP_CFG(GPIO37, AF1)
-#define GPIO38_MMC1_DAT6	MFP_CFG(GPIO38, AF1)
-#define GPIO54_MMC1_DAT5	MFP_CFG(GPIO54, AF1)
-#define GPIO48_MMC1_DAT4	MFP_CFG(GPIO48, AF1)
-#define GPIO51_MMC1_DAT3	MFP_CFG(GPIO51, AF1)
-#define GPIO52_MMC1_DAT2	MFP_CFG(GPIO52, AF1)
-#define GPIO40_MMC1_DAT1	MFP_CFG(GPIO40, AF1)
-#define GPIO41_MMC1_DAT0	MFP_CFG(GPIO41, AF1)
-#define GPIO49_MMC1_CMD		MFP_CFG(GPIO49, AF1)
-#define GPIO43_MMC1_CLK		MFP_CFG(GPIO43, AF1)
-#define GPIO53_MMC1_CD		MFP_CFG(GPIO53, AF1)
-#define GPIO46_MMC1_WP		MFP_CFG(GPIO46, AF1)
-
-/* MMC2 */
-#define	GPIO28_MMC2_CMD		MFP_CFG_DRV(GPIO28, AF6, FAST)
-#define	GPIO29_MMC2_CLK		MFP_CFG_DRV(GPIO29, AF6, FAST)
-#define	GPIO30_MMC2_DAT0	MFP_CFG_DRV(GPIO30, AF6, FAST)
-#define	GPIO31_MMC2_DAT1	MFP_CFG_DRV(GPIO31, AF6, FAST)
-#define	GPIO32_MMC2_DAT2	MFP_CFG_DRV(GPIO32, AF6, FAST)
-#define	GPIO33_MMC2_DAT3	MFP_CFG_DRV(GPIO33, AF6, FAST)
-
-/* MMC4 */
-#define GPIO125_MMC4_DAT3       MFP_CFG_DRV(GPIO125, AF7, FAST)
-#define GPIO126_MMC4_DAT2       MFP_CFG_DRV(GPIO126, AF7, FAST)
-#define GPIO127_MMC4_DAT1       MFP_CFG_DRV(GPIO127, AF7, FAST)
-#define GPIO0_2_MMC4_DAT0       MFP_CFG_DRV(GPIO0_2, AF7, FAST)
-#define GPIO1_2_MMC4_CMD        MFP_CFG_DRV(GPIO1_2, AF7, FAST)
-#define GPIO2_2_MMC4_CLK        MFP_CFG_DRV(GPIO2_2, AF7, FAST)
-
-/* LCD */
-#define GPIO84_LCD_CS		MFP_CFG(GPIO84, AF1)
-#define GPIO60_LCD_DD0		MFP_CFG(GPIO60, AF1)
-#define GPIO61_LCD_DD1		MFP_CFG(GPIO61, AF1)
-#define GPIO70_LCD_DD10		MFP_CFG(GPIO70, AF1)
-#define GPIO71_LCD_DD11		MFP_CFG(GPIO71, AF1)
-#define GPIO72_LCD_DD12		MFP_CFG(GPIO72, AF1)
-#define GPIO73_LCD_DD13		MFP_CFG(GPIO73, AF1)
-#define GPIO74_LCD_DD14		MFP_CFG(GPIO74, AF1)
-#define GPIO75_LCD_DD15		MFP_CFG(GPIO75, AF1)
-#define GPIO76_LCD_DD16		MFP_CFG(GPIO76, AF1)
-#define GPIO77_LCD_DD17		MFP_CFG(GPIO77, AF1)
-#define GPIO78_LCD_DD18		MFP_CFG(GPIO78, AF1)
-#define GPIO79_LCD_DD19		MFP_CFG(GPIO79, AF1)
-#define GPIO62_LCD_DD2		MFP_CFG(GPIO62, AF1)
-#define GPIO80_LCD_DD20		MFP_CFG(GPIO80, AF1)
-#define GPIO81_LCD_DD21		MFP_CFG(GPIO81, AF1)
-#define GPIO82_LCD_DD22		MFP_CFG(GPIO82, AF1)
-#define GPIO83_LCD_DD23		MFP_CFG(GPIO83, AF1)
-#define GPIO63_LCD_DD3		MFP_CFG(GPIO63, AF1)
-#define GPIO64_LCD_DD4		MFP_CFG(GPIO64, AF1)
-#define GPIO65_LCD_DD5		MFP_CFG(GPIO65, AF1)
-#define GPIO66_LCD_DD6		MFP_CFG(GPIO66, AF1)
-#define GPIO67_LCD_DD7		MFP_CFG(GPIO67, AF1)
-#define GPIO68_LCD_DD8		MFP_CFG(GPIO68, AF1)
-#define GPIO69_LCD_DD9		MFP_CFG(GPIO69, AF1)
-#define GPIO59_LCD_DENA_BIAS	MFP_CFG(GPIO59, AF1)
-#define GPIO56_LCD_FCLK_RD	MFP_CFG(GPIO56, AF1)
-#define GPIO57_LCD_LCLK_A0	MFP_CFG(GPIO57, AF1)
-#define GPIO58_LCD_PCLK_WR	MFP_CFG(GPIO58, AF1)
-#define GPIO85_LCD_VSYNC	MFP_CFG(GPIO85, AF1)
-
-/* I2C */
-#define GPIO105_CI2C_SDA	MFP_CFG(GPIO105, AF1)
-#define GPIO106_CI2C_SCL	MFP_CFG(GPIO106, AF1)
-
-/* I2S */
-#define GPIO113_I2S_MCLK	MFP_CFG(GPIO113, AF6)
-#define GPIO114_I2S_FRM		MFP_CFG(GPIO114, AF1)
-#define GPIO115_I2S_BCLK	MFP_CFG(GPIO115, AF1)
-#define GPIO116_I2S_RXD		MFP_CFG(GPIO116, AF2)
-#define GPIO116_I2S_TXD         MFP_CFG(GPIO116, AF1)
-#define GPIO117_I2S_TXD		MFP_CFG(GPIO117, AF2)
-
-/* PWM */
-#define GPIO96_PWM3_OUT		MFP_CFG(GPIO96, AF1)
-#define GPIO97_PWM2_OUT		MFP_CFG(GPIO97, AF1)
-#define GPIO98_PWM1_OUT		MFP_CFG(GPIO98, AF1)
-#define GPIO104_PWM4_OUT	MFP_CFG(GPIO104, AF1)
-#define GPIO106_PWM2_OUT	MFP_CFG(GPIO106, AF2)
-#define GPIO74_PWM4_OUT		MFP_CFG(GPIO74, AF2)
-#define GPIO75_PWM3_OUT		MFP_CFG(GPIO75, AF2)
-#define GPIO76_PWM2_OUT		MFP_CFG(GPIO76, AF2)
-#define GPIO77_PWM1_OUT		MFP_CFG(GPIO77, AF2)
-#define GPIO82_PWM4_OUT		MFP_CFG(GPIO82, AF2)
-#define GPIO83_PWM3_OUT		MFP_CFG(GPIO83, AF2)
-#define GPIO84_PWM2_OUT		MFP_CFG(GPIO84, AF2)
-#define GPIO85_PWM1_OUT		MFP_CFG(GPIO85, AF2)
-#define GPIO84_PWM1_OUT		MFP_CFG(GPIO84, AF4)
-#define GPIO122_PWM3_OUT	MFP_CFG(GPIO122, AF3)
-#define GPIO123_PWM1_OUT	MFP_CFG(GPIO123, AF1)
-#define GPIO124_PWM2_OUT	MFP_CFG(GPIO124, AF1)
-#define GPIO125_PWM3_OUT	MFP_CFG(GPIO125, AF1)
-#define GPIO126_PWM4_OUT	MFP_CFG(GPIO126, AF1)
-#define GPIO86_PWM1_OUT		MFP_CFG(GPIO86, AF2)
-#define GPIO86_PWM2_OUT		MFP_CFG(GPIO86, AF3)
-
-/* Keypad */
-#define GPIO109_KP_MKIN1        MFP_CFG(GPIO109, AF7)
-#define GPIO110_KP_MKIN0        MFP_CFG(GPIO110, AF7)
-#define GPIO111_KP_MKOUT7       MFP_CFG(GPIO111, AF7)
-#define GPIO112_KP_MKOUT6       MFP_CFG(GPIO112, AF7)
-#define GPIO121_KP_MKIN4        MFP_CFG(GPIO121, AF7)
-
-/* Fast Ethernet */
-#define GPIO86_TX_CLK		MFP_CFG(GPIO86, AF5)
-#define GPIO87_TX_EN		MFP_CFG(GPIO87, AF5)
-#define GPIO88_TX_DQ3		MFP_CFG(GPIO88, AF5)
-#define GPIO89_TX_DQ2		MFP_CFG(GPIO89, AF5)
-#define GPIO90_TX_DQ1		MFP_CFG(GPIO90, AF5)
-#define GPIO91_TX_DQ0		MFP_CFG(GPIO91, AF5)
-#define GPIO92_MII_CRS		MFP_CFG(GPIO92, AF5)
-#define GPIO93_MII_COL		MFP_CFG(GPIO93, AF5)
-#define GPIO94_RX_CLK		MFP_CFG(GPIO94, AF5)
-#define GPIO95_RX_ER		MFP_CFG(GPIO95, AF5)
-#define GPIO96_RX_DQ3		MFP_CFG(GPIO96, AF5)
-#define GPIO97_RX_DQ2		MFP_CFG(GPIO97, AF5)
-#define GPIO98_RX_DQ1		MFP_CFG(GPIO98, AF5)
-#define GPIO99_RX_DQ0		MFP_CFG(GPIO99, AF5)
-#define GPIO100_MII_MDC		MFP_CFG(GPIO100, AF5)
-#define GPIO101_MII_MDIO	MFP_CFG(GPIO101, AF5)
-#define GPIO103_RX_DV		MFP_CFG(GPIO103, AF5)
-
-/* SSP2 */
-#define GPIO107_SSP2_RXD	MFP_CFG(GPIO107, AF4)
-#define GPIO108_SSP2_TXD	MFP_CFG(GPIO108, AF4)
-#define GPIO111_SSP2_CLK	MFP_CFG(GPIO111, AF4)
-#define GPIO112_SSP2_FRM	MFP_CFG(GPIO112, AF4)
-
-#endif /* __ASM_MACH_MFP_PXA168_H */
diff --git a/arch/arm/mach-mmp/mfp-pxa910.h b/arch/arm/mach-mmp/mfp-pxa910.h
deleted file mode 100644
index 6f900cade631..000000000000
--- a/arch/arm/mach-mmp/mfp-pxa910.h
+++ /dev/null
@@ -1,170 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_MACH_MFP_PXA910_H
-#define __ASM_MACH_MFP_PXA910_H
-
-#include "mfp.h"
-
-#define MFP_DRIVE_VERY_SLOW	(0x0 << 13)
-#define MFP_DRIVE_SLOW		(0x2 << 13)
-#define MFP_DRIVE_MEDIUM	(0x4 << 13)
-#define MFP_DRIVE_FAST		(0x6 << 13)
-
-/* UART2 */
-#define GPIO47_UART2_RXD	MFP_CFG(GPIO47, AF6)
-#define GPIO48_UART2_TXD	MFP_CFG(GPIO48, AF6)
-
-/* UART3 */
-#define GPIO31_UART3_RXD	MFP_CFG(GPIO31, AF4)
-#define GPIO32_UART3_TXD	MFP_CFG(GPIO32, AF4)
-
-/*IRDA*/
-#define GPIO51_IRDA_SHDN	MFP_CFG(GPIO51, AF0)
-
-/* SMC */
-#define SM_nCS0_nCS0		MFP_CFG(SM_nCS0, AF0)
-#define SM_ADV_SM_ADV		MFP_CFG(SM_ADV, AF0)
-#define SM_SCLK_SM_SCLK		MFP_CFG(SM_SCLK, AF0)
-#define SM_BE0_SM_BE0		MFP_CFG(SM_BE0, AF1)
-#define SM_BE1_SM_BE1		MFP_CFG(SM_BE1, AF1)
-
-/* I2C */
-#define GPIO53_CI2C_SCL		MFP_CFG(GPIO53, AF2)
-#define GPIO54_CI2C_SDA		MFP_CFG(GPIO54, AF2)
-
-/* SSP1 (I2S) */
-#define GPIO24_SSP1_SDATA_IN	MFP_CFG_DRV(GPIO24, AF1, MEDIUM)
-#define GPIO21_SSP1_BITCLK	MFP_CFG_DRV(GPIO21, AF1, MEDIUM)
-#define GPIO20_SSP1_SYSCLK	MFP_CFG_DRV(GPIO20, AF1, MEDIUM)
-#define GPIO22_SSP1_SYNC	MFP_CFG_DRV(GPIO22, AF1, MEDIUM)
-#define GPIO23_SSP1_DATA_OUT	MFP_CFG_DRV(GPIO23, AF1, MEDIUM)
-#define GPIO124_MN_CLK_OUT	MFP_CFG_DRV(GPIO124, AF1, MEDIUM)
-#define GPIO123_CLK_REQ		MFP_CFG_DRV(GPIO123, AF0, MEDIUM)
-
-/* DFI */
-#define DF_IO0_ND_IO0		MFP_CFG(DF_IO0, AF0)
-#define DF_IO1_ND_IO1		MFP_CFG(DF_IO1, AF0)
-#define DF_IO2_ND_IO2		MFP_CFG(DF_IO2, AF0)
-#define DF_IO3_ND_IO3		MFP_CFG(DF_IO3, AF0)
-#define DF_IO4_ND_IO4		MFP_CFG(DF_IO4, AF0)
-#define DF_IO5_ND_IO5		MFP_CFG(DF_IO5, AF0)
-#define DF_IO6_ND_IO6		MFP_CFG(DF_IO6, AF0)
-#define DF_IO7_ND_IO7		MFP_CFG(DF_IO7, AF0)
-#define DF_IO8_ND_IO8		MFP_CFG(DF_IO8, AF0)
-#define DF_IO9_ND_IO9		MFP_CFG(DF_IO9, AF0)
-#define DF_IO10_ND_IO10		MFP_CFG(DF_IO10, AF0)
-#define DF_IO11_ND_IO11		MFP_CFG(DF_IO11, AF0)
-#define DF_IO12_ND_IO12		MFP_CFG(DF_IO12, AF0)
-#define DF_IO13_ND_IO13		MFP_CFG(DF_IO13, AF0)
-#define DF_IO14_ND_IO14		MFP_CFG(DF_IO14, AF0)
-#define DF_IO15_ND_IO15		MFP_CFG(DF_IO15, AF0)
-#define DF_nCS0_SM_nCS2_nCS0	MFP_CFG(DF_nCS0_SM_nCS2, AF0)
-#define DF_ALE_SM_WEn_ND_ALE	MFP_CFG(DF_ALE_SM_WEn, AF1)
-#define DF_CLE_SM_OEn_ND_CLE	MFP_CFG(DF_CLE_SM_OEn, AF0)
-#define DF_WEn_DF_WEn		MFP_CFG(DF_WEn, AF1)
-#define DF_REn_DF_REn		MFP_CFG(DF_REn, AF1)
-#define DF_RDY0_DF_RDY0		MFP_CFG(DF_RDY0, AF0)
-
-/*keypad*/
-#define GPIO00_KP_MKIN0		MFP_CFG(GPIO0, AF1)
-#define GPIO01_KP_MKOUT0	MFP_CFG(GPIO1, AF1)
-#define GPIO02_KP_MKIN1		MFP_CFG(GPIO2, AF1)
-#define GPIO03_KP_MKOUT1	MFP_CFG(GPIO3, AF1)
-#define GPIO04_KP_MKIN2		MFP_CFG(GPIO4, AF1)
-#define GPIO05_KP_MKOUT2	MFP_CFG(GPIO5, AF1)
-#define GPIO06_KP_MKIN3		MFP_CFG(GPIO6, AF1)
-#define GPIO07_KP_MKOUT3	MFP_CFG(GPIO7, AF1)
-#define GPIO08_KP_MKIN4		MFP_CFG(GPIO8, AF1)
-#define GPIO09_KP_MKOUT4	MFP_CFG(GPIO9, AF1)
-#define GPIO10_KP_MKIN5		MFP_CFG(GPIO10, AF1)
-#define GPIO11_KP_MKOUT5	MFP_CFG(GPIO11, AF1)
-#define GPIO12_KP_MKIN6		MFP_CFG(GPIO12, AF1)
-#define GPIO13_KP_MKOUT6	MFP_CFG(GPIO13, AF1)
-#define GPIO14_KP_MKIN7		MFP_CFG(GPIO14, AF1)
-#define GPIO15_KP_MKOUT7	MFP_CFG(GPIO15, AF1)
-#define GPIO16_KP_DKIN0		MFP_CFG(GPIO16, AF1)
-#define GPIO17_KP_DKIN1		MFP_CFG(GPIO17, AF1)
-#define GPIO18_KP_DKIN2		MFP_CFG(GPIO18, AF1)
-#define GPIO19_KP_DKIN3		MFP_CFG(GPIO19, AF1)
-
-/* LCD */
-#define GPIO81_LCD_FCLK		MFP_CFG(GPIO81, AF1)
-#define GPIO82_LCD_LCLK		MFP_CFG(GPIO82, AF1)
-#define GPIO83_LCD_PCLK		MFP_CFG(GPIO83, AF1)
-#define GPIO84_LCD_DENA		MFP_CFG(GPIO84, AF1)
-#define GPIO85_LCD_DD0		MFP_CFG(GPIO85, AF1)
-#define GPIO86_LCD_DD1		MFP_CFG(GPIO86, AF1)
-#define GPIO87_LCD_DD2		MFP_CFG(GPIO87, AF1)
-#define GPIO88_LCD_DD3		MFP_CFG(GPIO88, AF1)
-#define GPIO89_LCD_DD4		MFP_CFG(GPIO89, AF1)
-#define GPIO90_LCD_DD5		MFP_CFG(GPIO90, AF1)
-#define GPIO91_LCD_DD6		MFP_CFG(GPIO91, AF1)
-#define GPIO92_LCD_DD7		MFP_CFG(GPIO92, AF1)
-#define GPIO93_LCD_DD8		MFP_CFG(GPIO93, AF1)
-#define GPIO94_LCD_DD9		MFP_CFG(GPIO94, AF1)
-#define GPIO95_LCD_DD10		MFP_CFG(GPIO95, AF1)
-#define GPIO96_LCD_DD11		MFP_CFG(GPIO96, AF1)
-#define GPIO97_LCD_DD12		MFP_CFG(GPIO97, AF1)
-#define GPIO98_LCD_DD13		MFP_CFG(GPIO98, AF1)
-#define GPIO100_LCD_DD14	MFP_CFG(GPIO100, AF1)
-#define GPIO101_LCD_DD15	MFP_CFG(GPIO101, AF1)
-#define GPIO102_LCD_DD16	MFP_CFG(GPIO102, AF1)
-#define GPIO103_LCD_DD17	MFP_CFG(GPIO103, AF1)
-#define GPIO104_LCD_DD18	MFP_CFG(GPIO104, AF1)
-#define GPIO105_LCD_DD19	MFP_CFG(GPIO105, AF1)
-#define GPIO106_LCD_DD20	MFP_CFG(GPIO106, AF1)
-#define GPIO107_LCD_DD21	MFP_CFG(GPIO107, AF1)
-#define GPIO108_LCD_DD22	MFP_CFG(GPIO108, AF1)
-#define GPIO109_LCD_DD23	MFP_CFG(GPIO109, AF1)
-
-#define GPIO104_LCD_SPIDOUT	MFP_CFG(GPIO104, AF3)
-#define GPIO105_LCD_SPIDIN	MFP_CFG(GPIO105, AF3)
-#define GPIO107_LCD_CS1 	MFP_CFG(GPIO107, AF3)
-#define GPIO108_LCD_DCLK	MFP_CFG(GPIO108, AF3)
-
-#define GPIO106_LCD_RESET	MFP_CFG(GPIO106, AF0)
-
-/*smart panel*/
-#define GPIO82_LCD_A0		MFP_CFG(GPIO82, AF0)
-#define GPIO83_LCD_WR		MFP_CFG(GPIO83, AF0)
-#define GPIO103_LCD_CS		MFP_CFG(GPIO103, AF0)
-
-/*1wire*/
-#define GPIO106_1WIRE		MFP_CFG(GPIO106, AF3)
-
-/*CCIC*/
-#define GPIO67_CCIC_IN7		MFP_CFG_DRV(GPIO67, AF1, MEDIUM)
-#define GPIO68_CCIC_IN6		MFP_CFG_DRV(GPIO68, AF1, MEDIUM)
-#define GPIO69_CCIC_IN5		MFP_CFG_DRV(GPIO69, AF1, MEDIUM)
-#define GPIO70_CCIC_IN4		MFP_CFG_DRV(GPIO70, AF1, MEDIUM)
-#define GPIO71_CCIC_IN3		MFP_CFG_DRV(GPIO71, AF1, MEDIUM)
-#define GPIO72_CCIC_IN2		MFP_CFG_DRV(GPIO72, AF1, MEDIUM)
-#define GPIO73_CCIC_IN1		MFP_CFG_DRV(GPIO73, AF1, MEDIUM)
-#define GPIO74_CCIC_IN0		MFP_CFG_DRV(GPIO74, AF1, MEDIUM)
-#define GPIO75_CAM_HSYNC	MFP_CFG_DRV(GPIO75, AF1, MEDIUM)
-#define GPIO76_CAM_VSYNC	MFP_CFG_DRV(GPIO76, AF1, MEDIUM)
-#define GPIO77_CAM_MCLK		MFP_CFG_DRV(GPIO77, AF1, MEDIUM)
-#define GPIO78_CAM_PCLK		MFP_CFG_DRV(GPIO78, AF1, MEDIUM)
-
-/* MMC1 */
-#define MMC1_DAT7_MMC1_DAT7	MFP_CFG_DRV(MMC1_DAT7, AF0, MEDIUM)
-#define MMC1_DAT6_MMC1_DAT6	MFP_CFG_DRV(MMC1_DAT6, AF0, MEDIUM)
-#define MMC1_DAT5_MMC1_DAT5	MFP_CFG_DRV(MMC1_DAT5, AF0, MEDIUM)
-#define MMC1_DAT4_MMC1_DAT4	MFP_CFG_DRV(MMC1_DAT4, AF0, MEDIUM)
-#define MMC1_DAT3_MMC1_DAT3	MFP_CFG_DRV(MMC1_DAT3, AF0, MEDIUM)
-#define MMC1_DAT2_MMC1_DAT2	MFP_CFG_DRV(MMC1_DAT2, AF0, MEDIUM)
-#define MMC1_DAT1_MMC1_DAT1	MFP_CFG_DRV(MMC1_DAT1, AF0, MEDIUM)
-#define MMC1_DAT0_MMC1_DAT0	MFP_CFG_DRV(MMC1_DAT0, AF0, MEDIUM)
-#define MMC1_CMD_MMC1_CMD	MFP_CFG_DRV(MMC1_CMD, AF0, MEDIUM)
-#define MMC1_CLK_MMC1_CLK	MFP_CFG_DRV(MMC1_CLK, AF0, MEDIUM)
-#define MMC1_CD_MMC1_CD		MFP_CFG_DRV(MMC1_CD, AF0, MEDIUM)
-#define MMC1_WP_MMC1_WP		MFP_CFG_DRV(MMC1_WP, AF0, MEDIUM)
-
-/* PWM */
-#define GPIO27_PWM3_AF2		MFP_CFG(GPIO27, AF2)
-#define GPIO51_PWM2_OUT		MFP_CFG(GPIO51, AF2)
-#define GPIO117_PWM1_OUT	MFP_CFG(GPIO117, AF2)
-#define GPIO118_PWM2_OUT	MFP_CFG(GPIO118, AF2)
-#define GPIO119_PWM3_OUT	MFP_CFG(GPIO119, AF2)
-#define GPIO120_PWM4_OUT	MFP_CFG(GPIO120, AF2)
-
-#endif /* __ASM_MACH MFP_PXA910_H */
diff --git a/arch/arm/mach-mmp/teton_bga.c b/arch/arm/mach-mmp/teton_bga.c
deleted file mode 100644
index 7111535f325f..000000000000
--- a/arch/arm/mach-mmp/teton_bga.c
+++ /dev/null
@@ -1,100 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-mmp/teton_bga.c
- *
- *  Support for the Marvell PXA168 Teton BGA Development Platform.
- *
- *  Author: Mark F. Brown <mark.brown314@gmail.com>
- *
- *  This code is based on aspenite.c
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/gpio-pxa.h>
-#include <linux/input.h>
-#include <linux/platform_data/keypad-pxa27x.h>
-#include <linux/i2c.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include "addr-map.h"
-#include "mfp-pxa168.h"
-#include "pxa168.h"
-#include "teton_bga.h"
-#include "irqs.h"
-
-#include "common.h"
-
-static unsigned long teton_bga_pin_config[] __initdata = {
-	/* UART1 */
-	GPIO107_UART1_TXD,
-	GPIO108_UART1_RXD,
-
-	/* Keypad */
-	GPIO109_KP_MKIN1,
-	GPIO110_KP_MKIN0,
-	GPIO111_KP_MKOUT7,
-	GPIO112_KP_MKOUT6,
-
-	/* I2C Bus */
-	GPIO105_CI2C_SDA,
-	GPIO106_CI2C_SCL,
-
-	/* RTC */
-	GPIO78_GPIO,
-};
-
-static struct pxa_gpio_platform_data pxa168_gpio_pdata = {
-	.irq_base	= MMP_GPIO_TO_IRQ(0),
-};
-
-static unsigned int teton_bga_matrix_key_map[] = {
-	KEY(0, 6, KEY_ESC),
-	KEY(0, 7, KEY_ENTER),
-	KEY(1, 6, KEY_LEFT),
-	KEY(1, 7, KEY_RIGHT),
-};
-
-static struct matrix_keymap_data teton_bga_matrix_keymap_data = {
-	.keymap			= teton_bga_matrix_key_map,
-	.keymap_size		= ARRAY_SIZE(teton_bga_matrix_key_map),
-};
-
-static struct pxa27x_keypad_platform_data teton_bga_keypad_info __initdata = {
-	.matrix_key_rows        = 2,
-	.matrix_key_cols        = 8,
-	.matrix_keymap_data	= &teton_bga_matrix_keymap_data,
-	.debounce_interval      = 30,
-};
-
-static struct i2c_board_info teton_bga_i2c_info[] __initdata = {
-	{
-		I2C_BOARD_INFO("ds1337", 0x68),
-		.irq = MMP_GPIO_TO_IRQ(RTC_INT_GPIO)
-	},
-};
-
-static void __init teton_bga_init(void)
-{
-	mfp_config(ARRAY_AND_SIZE(teton_bga_pin_config));
-
-	/* on-chip devices */
-	pxa168_add_uart(1);
-	pxa168_add_keypad(&teton_bga_keypad_info);
-	pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(teton_bga_i2c_info));
-	platform_device_add_data(&pxa168_device_gpio, &pxa168_gpio_pdata,
-				 sizeof(struct pxa_gpio_platform_data));
-	platform_device_register(&pxa168_device_gpio);
-}
-
-MACHINE_START(TETON_BGA, "PXA168-based Teton BGA Development Platform")
-	.map_io		= mmp_map_io,
-	.nr_irqs	= MMP_NR_IRQS,
-	.init_irq       = pxa168_init_irq,
-	.init_time	= pxa168_timer_init,
-	.init_machine   = teton_bga_init,
-	.restart	= pxa168_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mmp/teton_bga.h b/arch/arm/mach-mmp/teton_bga.h
deleted file mode 100644
index 73050096f0bd..000000000000
--- a/arch/arm/mach-mmp/teton_bga.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *  Support for the Marvell PXA168 Teton BGA Development Platform.
- */
-#ifndef __ASM_MACH_TETON_BGA_H
-#define __ASM_MACH_TETON_BGA_H
-
-/* GPIOs */
-#define MMC_PWENA_GPIO		27
-#define USBHPENB_GPIO		55
-#define RTC_INT_GPIO		78
-#define LCD_VBLK_EN_GPIO	79
-#define LCD_DVDD_EN_GPIO	80
-#define RST_WIFI_GPIO		81
-#define CF_PWEN_GPIO		82
-#define USB_OC_GPIO		83
-#define PWM_GPIO		84
-#define USBHPENA_GPIO		85
-#define TS_INT_GPIO		86
-#define CIR_GPIO		108
-
-#endif /* __ASM_MACH_TETON_BGA_H */
diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c
deleted file mode 100644
index 345b2e6d5c7e..000000000000
--- a/arch/arm/mach-mmp/ttc_dkb.c
+++ /dev/null
@@ -1,315 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-mmp/ttc_dkb.c
- *
- *  Support for the Marvell PXA910-based TTC_DKB Development Platform.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/onenand.h>
-#include <linux/interrupt.h>
-#include <linux/platform_data/pca953x.h>
-#include <linux/gpio.h>
-#include <linux/gpio-pxa.h>
-#include <linux/mfd/88pm860x.h>
-#include <linux/platform_data/mv_usb.h>
-#include <linux/spi/spi.h>
-#include <linux/delay.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include "addr-map.h"
-#include "mfp-pxa910.h"
-#include "pxa910.h"
-#include "irqs.h"
-#include "regs-usb.h"
-
-#include "common.h"
-
-#define TTCDKB_GPIO_EXT0(x)	(MMP_NR_BUILTIN_GPIO + ((x < 0) ? 0 :	\
-				((x < 16) ? x : 15)))
-#define TTCDKB_GPIO_EXT1(x)	(MMP_NR_BUILTIN_GPIO + 16 + ((x < 0) ? 0 : \
-				((x < 16) ? x : 15)))
-
-/*
- * 16 board interrupts -- MAX7312 GPIO expander
- * 16 board interrupts -- PCA9575 GPIO expander
- * 24 board interrupts -- 88PM860x PMIC
- */
-#define TTCDKB_NR_IRQS		(MMP_NR_IRQS + 16 + 16 + 24)
-
-static unsigned long ttc_dkb_pin_config[] __initdata = {
-	/* UART2 */
-	GPIO47_UART2_RXD,
-	GPIO48_UART2_TXD,
-
-	/* DFI */
-	DF_IO0_ND_IO0,
-	DF_IO1_ND_IO1,
-	DF_IO2_ND_IO2,
-	DF_IO3_ND_IO3,
-	DF_IO4_ND_IO4,
-	DF_IO5_ND_IO5,
-	DF_IO6_ND_IO6,
-	DF_IO7_ND_IO7,
-	DF_IO8_ND_IO8,
-	DF_IO9_ND_IO9,
-	DF_IO10_ND_IO10,
-	DF_IO11_ND_IO11,
-	DF_IO12_ND_IO12,
-	DF_IO13_ND_IO13,
-	DF_IO14_ND_IO14,
-	DF_IO15_ND_IO15,
-	DF_nCS0_SM_nCS2_nCS0,
-	DF_ALE_SM_WEn_ND_ALE,
-	DF_CLE_SM_OEn_ND_CLE,
-	DF_WEn_DF_WEn,
-	DF_REn_DF_REn,
-	DF_RDY0_DF_RDY0,
-};
-
-static struct pxa_gpio_platform_data pxa910_gpio_pdata = {
-	.irq_base	= MMP_GPIO_TO_IRQ(0),
-};
-
-static struct mtd_partition ttc_dkb_onenand_partitions[] = {
-	{
-		.name		= "bootloader",
-		.offset		= 0,
-		.size		= SZ_1M,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "reserved",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_128K,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "reserved",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_8M,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= (SZ_2M + SZ_1M),
-		.mask_flags	= 0,
-	}, {
-		.name		= "filesystem",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_32M + SZ_16M,
-		.mask_flags	= 0,
-	}
-};
-
-static struct onenand_platform_data ttc_dkb_onenand_info = {
-	.parts		= ttc_dkb_onenand_partitions,
-	.nr_parts	= ARRAY_SIZE(ttc_dkb_onenand_partitions),
-};
-
-static struct resource ttc_dkb_resource_onenand[] = {
-	[0] = {
-		.start	= SMC_CS0_PHYS_BASE,
-		.end	= SMC_CS0_PHYS_BASE + SZ_1M,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device ttc_dkb_device_onenand = {
-	.name		= "onenand-flash",
-	.id		= -1,
-	.resource	= ttc_dkb_resource_onenand,
-	.num_resources	= ARRAY_SIZE(ttc_dkb_resource_onenand),
-	.dev		= {
-		.platform_data	= &ttc_dkb_onenand_info,
-	},
-};
-
-static struct platform_device *ttc_dkb_devices[] = {
-	&pxa910_device_gpio,
-	&pxa910_device_rtc,
-	&ttc_dkb_device_onenand,
-};
-
-static struct pca953x_platform_data max7312_data[] = {
-	{
-		.gpio_base	= TTCDKB_GPIO_EXT0(0),
-		.irq_base	= MMP_NR_IRQS,
-	},
-};
-
-static struct pm860x_platform_data ttc_dkb_pm8607_info = {
-	.irq_base       = IRQ_BOARD_START,
-};
-
-static struct i2c_board_info ttc_dkb_i2c_info[] = {
-	{
-		.type           = "88PM860x",
-		.addr           = 0x34,
-		.platform_data  = &ttc_dkb_pm8607_info,
-		.irq            = IRQ_PXA910_PMIC_INT,
-	},
-	{
-		.type		= "max7312",
-		.addr		= 0x23,
-		.irq		= MMP_GPIO_TO_IRQ(80),
-		.platform_data	= &max7312_data,
-	},
-};
-
-#if IS_ENABLED(CONFIG_USB_SUPPORT)
-#if IS_ENABLED(CONFIG_USB_MV_UDC) || IS_ENABLED(CONFIG_USB_EHCI_MV_U2O)
-
-static struct mv_usb_platform_data ttc_usb_pdata = {
-	.vbus		= NULL,
-	.mode		= MV_USB_MODE_OTG,
-	.otg_force_a_bus_req = 1,
-	.phy_init	= pxa_usb_phy_init,
-	.phy_deinit	= pxa_usb_phy_deinit,
-	.set_vbus	= NULL,
-};
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
-static struct pxa3xx_nand_platform_data dkb_nand_info = {};
-#endif
-
-#if IS_ENABLED(CONFIG_MMP_DISP)
-/* path config */
-#define CFG_IOPADMODE(iopad)   (iopad)  /* 0x0 ~ 0xd */
-#define SCLK_SOURCE_SELECT(x)  (x << 30) /* 0x0 ~ 0x3 */
-/* link config */
-#define CFG_DUMBMODE(mode)     (mode << 28) /* 0x0 ~ 0x6*/
-static struct mmp_mach_path_config dkb_disp_config[] = {
-	[0] = {
-		.name = "mmp-parallel",
-		.overlay_num = 2,
-		.output_type = PATH_OUT_PARALLEL,
-		.path_config = CFG_IOPADMODE(0x1)
-			| SCLK_SOURCE_SELECT(0x1),
-		.link_config = CFG_DUMBMODE(0x2),
-	},
-};
-
-static struct mmp_mach_plat_info dkb_disp_info = {
-	.name = "mmp-disp",
-	.clk_name = "disp0",
-	.path_num = 1,
-	.paths = dkb_disp_config,
-};
-
-static struct mmp_buffer_driver_mach_info dkb_fb_info = {
-	.name = "mmp-fb",
-	.path_name = "mmp-parallel",
-	.overlay_id = 0,
-	.dmafetch_id = 1,
-	.default_pixfmt = PIXFMT_RGB565,
-};
-
-static void dkb_tpo_panel_power(int on)
-{
-	int err;
-	u32 spi_reset = mfp_to_gpio(MFP_PIN_GPIO106);
-
-	if (on) {
-		err = gpio_request(spi_reset, "TPO_LCD_SPI_RESET");
-		if (err) {
-			pr_err("failed to request GPIO for TPO LCD RESET\n");
-			return;
-		}
-		gpio_direction_output(spi_reset, 0);
-		udelay(100);
-		gpio_set_value(spi_reset, 1);
-		gpio_free(spi_reset);
-	} else {
-		err = gpio_request(spi_reset, "TPO_LCD_SPI_RESET");
-		if (err) {
-			pr_err("failed to request LCD RESET gpio\n");
-			return;
-		}
-		gpio_set_value(spi_reset, 0);
-		gpio_free(spi_reset);
-	}
-}
-
-static struct mmp_mach_panel_info dkb_tpo_panel_info = {
-	.name = "tpo-hvga",
-	.plat_path_name = "mmp-parallel",
-	.plat_set_onoff = dkb_tpo_panel_power,
-};
-
-static struct spi_board_info spi_board_info[] __initdata = {
-	{
-		.modalias       = "tpo-hvga",
-		.platform_data  = &dkb_tpo_panel_info,
-		.bus_num        = 5,
-	}
-};
-
-static void __init add_disp(void)
-{
-	mmp_register_device(&pxa910_device_disp,
-		&dkb_disp_info, sizeof(dkb_disp_info));
-	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-	mmp_register_device(&pxa910_device_fb,
-		&dkb_fb_info, sizeof(dkb_fb_info));
-	mmp_register_device(&pxa910_device_panel,
-		&dkb_tpo_panel_info, sizeof(dkb_tpo_panel_info));
-}
-#endif
-
-static void __init ttc_dkb_init(void)
-{
-	mfp_config(ARRAY_AND_SIZE(ttc_dkb_pin_config));
-
-	/* on-chip devices */
-	pxa910_add_uart(1);
-#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
-	pxa910_add_nand(&dkb_nand_info);
-#endif
-
-	/* off-chip devices */
-	pxa910_add_twsi(0, NULL, ARRAY_AND_SIZE(ttc_dkb_i2c_info));
-	platform_device_add_data(&pxa910_device_gpio, &pxa910_gpio_pdata,
-				 sizeof(struct pxa_gpio_platform_data));
-	platform_add_devices(ARRAY_AND_SIZE(ttc_dkb_devices));
-
-#if IS_ENABLED(CONFIG_USB_SUPPORT)
-#if IS_ENABLED(CONFIG_PHY_PXA_USB)
-	platform_device_register(&pxa168_device_usb_phy);
-#endif
-
-#if IS_ENABLED(CONFIG_USB_MV_UDC)
-	pxa168_device_u2o.dev.platform_data = &ttc_usb_pdata;
-	platform_device_register(&pxa168_device_u2o);
-#endif
-
-#if IS_ENABLED(CONFIG_USB_EHCI_MV_U2O)
-	pxa168_device_u2oehci.dev.platform_data = &ttc_usb_pdata;
-	platform_device_register(&pxa168_device_u2oehci);
-#endif
-
-#if IS_ENABLED(CONFIG_USB_MV_OTG)
-	pxa168_device_u2ootg.dev.platform_data = &ttc_usb_pdata;
-	platform_device_register(&pxa168_device_u2ootg);
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_MMP_DISP)
-	add_disp();
-#endif
-}
-
-MACHINE_START(TTC_DKB, "PXA910-based TTC_DKB Development Platform")
-	.map_io		= mmp_map_io,
-	.nr_irqs	= TTCDKB_NR_IRQS,
-	.init_irq       = pxa910_init_irq,
-	.init_time	= pxa910_timer_init,
-	.init_machine   = ttc_dkb_init,
-	.restart	= mmp_restart,
-MACHINE_END