soc: imx: imx8m-blk-ctrl: Add i.MX8MP media blk-ctrl

Add the description for the i.MX8MP media blk-ctrl.

Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Tested-by: Marek Vasut <marex@denx.de> # MX8MP LCDIF #1 and #2
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This commit is contained in:
Paul Elder 2022-04-06 17:33:55 +02:00 committed by Shawn Guo
parent 556f5cf956
commit 07614fed00

View File

@ -15,11 +15,12 @@
#include <dt-bindings/power/imx8mm-power.h>
#include <dt-bindings/power/imx8mn-power.h>
#include <dt-bindings/power/imx8mp-power.h>
#include <dt-bindings/power/imx8mq-power.h>
#define BLK_SFT_RSTN 0x0
#define BLK_CLK_EN 0x4
#define BLK_MIPI_RESET_DIV 0x8 /* Mini/Nano DISPLAY_BLK_CTRL only */
#define BLK_MIPI_RESET_DIV 0x8 /* Mini/Nano/Plus DISPLAY_BLK_CTRL only */
struct imx8m_blk_ctrl_domain;
@ -41,7 +42,7 @@ struct imx8m_blk_ctrl_domain_data {
u32 clk_mask;
/*
* i.MX8M Mini and Nano have a third DISPLAY_BLK_CTRL register
* i.MX8M Mini, Nano and Plus have a third DISPLAY_BLK_CTRL register
* which is used to control the reset for the MIPI Phy.
* Since it's only present in certain circumstances,
* an if-statement should be used before setting and clearing this
@ -591,6 +592,121 @@ static const struct imx8m_blk_ctrl_data imx8mn_disp_blk_ctl_dev_data = {
.num_domains = ARRAY_SIZE(imx8mn_disp_blk_ctl_domain_data),
};
static int imx8mp_media_power_notifier(struct notifier_block *nb,
unsigned long action, void *data)
{
struct imx8m_blk_ctrl *bc = container_of(nb, struct imx8m_blk_ctrl,
power_nb);
if (action != GENPD_NOTIFY_ON && action != GENPD_NOTIFY_PRE_OFF)
return NOTIFY_OK;
/* Enable bus clock and deassert bus reset */
regmap_set_bits(bc->regmap, BLK_CLK_EN, BIT(8));
regmap_set_bits(bc->regmap, BLK_SFT_RSTN, BIT(8));
/*
* On power up we have no software backchannel to the GPC to
* wait for the ADB handshake to happen, so we just delay for a
* bit. On power down the GPC driver waits for the handshake.
*/
if (action == GENPD_NOTIFY_ON)
udelay(5);
return NOTIFY_OK;
}
/*
* From i.MX 8M Plus Applications Processor Reference Manual, Rev. 1,
* section 13.2.2, 13.2.3
* isp-ahb and dwe are not in Figure 13-5. Media BLK_CTRL Clocks
*/
static const struct imx8m_blk_ctrl_domain_data imx8mp_media_blk_ctl_domain_data[] = {
[IMX8MP_MEDIABLK_PD_MIPI_DSI_1] = {
.name = "mediablk-mipi-dsi-1",
.clk_names = (const char *[]){ "apb", "phy", },
.num_clks = 2,
.gpc_name = "mipi-dsi1",
.rst_mask = BIT(0) | BIT(1),
.clk_mask = BIT(0) | BIT(1),
.mipi_phy_rst_mask = BIT(17),
},
[IMX8MP_MEDIABLK_PD_MIPI_CSI2_1] = {
.name = "mediablk-mipi-csi2-1",
.clk_names = (const char *[]){ "apb", "cam1" },
.num_clks = 2,
.gpc_name = "mipi-csi1",
.rst_mask = BIT(2) | BIT(3),
.clk_mask = BIT(2) | BIT(3),
.mipi_phy_rst_mask = BIT(16),
},
[IMX8MP_MEDIABLK_PD_LCDIF_1] = {
.name = "mediablk-lcdif-1",
.clk_names = (const char *[]){ "disp1", "apb", "axi", },
.num_clks = 3,
.gpc_name = "lcdif1",
.rst_mask = BIT(4) | BIT(5) | BIT(23),
.clk_mask = BIT(4) | BIT(5) | BIT(23),
},
[IMX8MP_MEDIABLK_PD_ISI] = {
.name = "mediablk-isi",
.clk_names = (const char *[]){ "axi", "apb" },
.num_clks = 2,
.gpc_name = "isi",
.rst_mask = BIT(6) | BIT(7),
.clk_mask = BIT(6) | BIT(7),
},
[IMX8MP_MEDIABLK_PD_MIPI_CSI2_2] = {
.name = "mediablk-mipi-csi2-2",
.clk_names = (const char *[]){ "apb", "cam2" },
.num_clks = 2,
.gpc_name = "mipi-csi2",
.rst_mask = BIT(9) | BIT(10),
.clk_mask = BIT(9) | BIT(10),
.mipi_phy_rst_mask = BIT(30),
},
[IMX8MP_MEDIABLK_PD_LCDIF_2] = {
.name = "mediablk-lcdif-2",
.clk_names = (const char *[]){ "disp1", "apb", "axi", },
.num_clks = 3,
.gpc_name = "lcdif2",
.rst_mask = BIT(11) | BIT(12) | BIT(24),
.clk_mask = BIT(11) | BIT(12) | BIT(24),
},
[IMX8MP_MEDIABLK_PD_ISP] = {
.name = "mediablk-isp",
.clk_names = (const char *[]){ "isp", "axi", "apb" },
.num_clks = 3,
.gpc_name = "isp",
.rst_mask = BIT(16) | BIT(17) | BIT(18),
.clk_mask = BIT(16) | BIT(17) | BIT(18),
},
[IMX8MP_MEDIABLK_PD_DWE] = {
.name = "mediablk-dwe",
.clk_names = (const char *[]){ "axi", "apb" },
.num_clks = 2,
.gpc_name = "dwe",
.rst_mask = BIT(19) | BIT(20) | BIT(21),
.clk_mask = BIT(19) | BIT(20) | BIT(21),
},
[IMX8MP_MEDIABLK_PD_MIPI_DSI_2] = {
.name = "mediablk-mipi-dsi-2",
.clk_names = (const char *[]){ "phy", },
.num_clks = 1,
.gpc_name = "mipi-dsi2",
.rst_mask = BIT(22),
.clk_mask = BIT(22),
.mipi_phy_rst_mask = BIT(29),
},
};
static const struct imx8m_blk_ctrl_data imx8mp_media_blk_ctl_dev_data = {
.max_reg = 0x138,
.power_notifier_fn = imx8mp_media_power_notifier,
.domains = imx8mp_media_blk_ctl_domain_data,
.num_domains = ARRAY_SIZE(imx8mp_media_blk_ctl_domain_data),
};
static int imx8mq_vpu_power_notifier(struct notifier_block *nb,
unsigned long action, void *data)
{
@ -663,6 +779,9 @@ static const struct of_device_id imx8m_blk_ctrl_of_match[] = {
}, {
.compatible = "fsl,imx8mn-disp-blk-ctrl",
.data = &imx8mn_disp_blk_ctl_dev_data
}, {
.compatible = "fsl,imx8mp-media-blk-ctrl",
.data = &imx8mp_media_blk_ctl_dev_data
}, {
.compatible = "fsl,imx8mq-vpu-blk-ctrl",
.data = &imx8mq_vpu_blk_ctl_dev_data