- New Drivers

- Add support for Allwinner A100 RGB LED controller - Add support for Maxim 5970 Dual Hot-swap controller - New Device Support - Add support for AW20108 to Awinic LED driver - New Functionality - Extend support for Net speeds to include; 2.5G, 5G and 10G - Allow tx/rx and cts/dsr/dcd/rng TTY LEDS to be turned on and off via sysfs if required - Add support for hardware control in AW200xx - Fix-ups - Use safer methods for string handling - Improve error handling; return proper error values, simplify, avoid duplicates, etc - Replace Mutex use with the Completion mechanism - Fix include lists; alphabetise, remove unused, explicitly add used - Use generic platform device properties - Use/convert to new/better APIs/helpers/MACROs instead of hand-rolling implementations - Device Tree binding adaptions/conversions/creation - Continue work to remove superfluous platform .remove() call-backs - Remove superfluous/defunct code - Trivial; whitespace, unused variables, spelling, clean-ups, etc - Avoid unnecessary duplicate locks - Bug Fixes - Repair Kconfig based dependency lists - Ensure unused dynamically allocated data is freed after use - Fix support for brightness control - Add missing sufficient delays during reset to ensure correct operation - Avoid division-by-zero issues -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAmWmsRkACgkQUa+KL4f8 d2HjTQ/8DKBBDEJQLX1R9GN3W+F1RwenAyeuLcaBzIR1eAcw2CV6bb686CO+WxIn pgZE33PiB1VR2Y571dUmj1oAJ8QMRsGed0bDzjNHO592ANHbGX/kxRlLsvcYqxE5 zAe0W93qn5ZEHRek6bJ55fsCuwRt1S/sPK/UDRb1MtJNQ51mh1ErhKk9rO0GkaDz OtOeOwIqwNIDBqmYs8IAgfFolzBgnCMBnAW7EGA6hJjc2lWHHr+T8flT7rEPPcxD s3ZT/m2jg0bAwWzFYWYxweyJ50NnP1xe7ABSqLi2jTcFkOKyYa/wvuL8GINXOSvM 9OVXPQ4MwiPTCPOhWex0WJ2/s0g2L5rL8gz+GBNVRppn53rYY0GwyXuEjmznYSrp X4T8C1wRUMXQeBTNyoDxDid3oGoObGfyzIfI/aPOpqRHmeGWsbBITztCXgBEQcbs k5WuiLzqYpLdTcjE0TJ4WTsR98zoY0yVwF5PFtTBcFTWz1QGmXujAa5gAIGJPhx6 fVovV0aih8hoZOq2xmCYRuR47rwH/QjfHcYZbhGC4YOPPA6Hh6j+eS9+1IpaWdLs gUtXpU/pIWKUn0FVmtvK83MJ6VbJy5QHpQi7nf06ADNlDt0IoMTJAoMYsiKzqgeG 3L+sAd/DYcuS7Eyf5DP9SY/rqSsamsdSJpaSynP1Rm8Cyqka/Qg= =/f98 -----END PGP SIGNATURE----- Merge tag 'leds-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds Pull LED updates from Lee Jones: "New Drivers: - Add support for Allwinner A100 RGB LED controller - Add support for Maxim 5970 Dual Hot-swap controller New Device Support: - Add support for AW20108 to Awinic LED driver New Functionality: - Extend support for Net speeds to include; 2.5G, 5G and 10G - Allow tx/rx and cts/dsr/dcd/rng TTY LEDS to be turned on and off via sysfs if required - Add support for hardware control in AW200xx Fix-ups: - Use safer methods for string handling - Improve error handling; return proper error values, simplify, avoid duplicates, etc - Replace Mutex use with the Completion mechanism - Fix include lists; alphabetise, remove unused, explicitly add used - Use generic platform device properties - Use/convert to new/better APIs/helpers/MACROs instead of hand-rolling implementations - Device Tree binding adaptions/conversions/creation - Continue work to remove superfluous platform .remove() call-backs - Remove superfluous/defunct code - Trivial; whitespace, unused variables, spelling, clean-ups, etc - Avoid unnecessary duplicate locks Bug Fixes: - Repair Kconfig based dependency lists - Ensure unused dynamically allocated data is freed after use - Fix support for brightness control - Add missing sufficient delays during reset to ensure correct operation - Avoid division-by-zero issues" * tag 'leds-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (45 commits) leds: trigger: netdev: Add core support for hw not supporting fallback to LED sw control leds: trigger: panic: Don't register panic notifier if creating the trigger failed leds: sun50i-a100: Convert to be agnostic to property provider leds: max5970: Add missing headers leds: max5970: Make use of dev_err_probe() leds: max5970: Make use of device properties leds: max5970: Remove unused variable leds: rgb: Drop obsolete dependency on COMPILE_TEST leds: sun50i-a100: Avoid division-by-zero warning leds: trigger: Remove unused function led_trigger_rename_static() leds: qcom-lpg: Introduce a wrapper for getting driver data from a pwm chip leds: gpio: Add kernel log if devm_fwnode_gpiod_get() fails dt-bindings: leds: qcom,spmi-flash-led: Fix example node name dt-bindings: leds: aw200xx: Fix led pattern and add reg constraints dt-bindings: leds: awinic,aw200xx: Add AW20108 device leds: aw200xx: Add support for aw20108 device leds: aw200xx: Improve autodim calculation method leds: aw200xx: Enable disable_locking flag in regmap config leds: aw200xx: Add delay after software reset dt-bindings: leds: aw200xx: Remove property "awinic,display-rows" ...
2024-01-17 15:25:27 -08:00 · 2024-01-17 15:25:27 -08:00 · 08df80a3c5
commit 08df80a3c5
parent 2385018a4e 4289e434c4
24 changed files with 1449 additions and 201 deletions
--- a/Documentation/ABI/testing/sysfs-class-led-trigger-netdev
+++ b/Documentation/ABI/testing/sysfs-class-led-trigger-netdev
@ -114,6 +114,45 @@ Description:
 		speed of 1000Mbps of the named network device.
 		Setting this value also immediately changes the LED state.

+What:		/sys/class/leds/<led>/link_2500
+Date:		Nov 2023
+KernelVersion:	6.8
+Contact:	linux-leds@vger.kernel.org
+Description:
+		Signal the link speed state of 2500Mbps of the named network device.
+
+		If set to 0 (default), the LED's normal state is off.
+
+		If set to 1, the LED's normal state reflects the link state
+		speed of 2500Mbps of the named network device.
+		Setting this value also immediately changes the LED state.
+
+What:		/sys/class/leds/<led>/link_5000
+Date:		Nov 2023
+KernelVersion:	6.8
+Contact:	linux-leds@vger.kernel.org
+Description:
+		Signal the link speed state of 5000Mbps of the named network device.
+
+		If set to 0 (default), the LED's normal state is off.
+
+		If set to 1, the LED's normal state reflects the link state
+		speed of 5000Mbps of the named network device.
+		Setting this value also immediately changes the LED state.
+
+What:		/sys/class/leds/<led>/link_10000
+Date:		Nov 2023
+KernelVersion:	6.8
+Contact:	linux-leds@vger.kernel.org
+Description:
+		Signal the link speed state of 10000Mbps of the named network device.
+
+		If set to 0 (default), the LED's normal state is off.
+
+		If set to 1, the LED's normal state reflects the link state
+		speed of 10000Mbps of the named network device.
+		Setting this value also immediately changes the LED state.
+
 What:		/sys/class/leds/<led>/half_duplex
 Date:		Jun 2023
 KernelVersion:	6.5
--- a/Documentation/ABI/testing/sysfs-class-led-trigger-tty
+++ b/Documentation/ABI/testing/sysfs-class-led-trigger-tty
@ -4,3 +4,59 @@ KernelVersion:	5.10
 Contact:	linux-leds@vger.kernel.org
 Description:
 		Specifies the tty device name of the triggering tty
+
+What:		/sys/class/leds/<led>/rx
+Date:		February 2024
+KernelVersion:	6.8
+Description:
+		Signal reception (rx) of data on the named tty device.
+		If set to 0, the LED will not blink on reception.
+		If set to 1 (default), the LED will blink on reception.
+
+What:		/sys/class/leds/<led>/tx
+Date:		February 2024
+KernelVersion:	6.8
+Description:
+		Signal transmission (tx) of data on the named tty device.
+		If set to 0, the LED will not blink on transmission.
+		If set to 1 (default), the LED will blink on transmission.
+
+What:		/sys/class/leds/<led>/cts
+Date:		February 2024
+KernelVersion:	6.8
+Description:
+		CTS = Clear To Send
+		DCE is ready to accept data from the DTE.
+		If the line state is detected, the LED is switched on.
+		If set to 0 (default), the LED will not evaluate CTS.
+		If set to 1, the LED will evaluate CTS.
+
+What:		/sys/class/leds/<led>/dsr
+Date:		February 2024
+KernelVersion:	6.8
+Description:
+		DSR = Data Set Ready
+		DCE is ready to receive and send data.
+		If the line state is detected, the LED is switched on.
+		If set to 0 (default), the LED will not evaluate DSR.
+		If set to 1, the LED will evaluate DSR.
+
+What:		/sys/class/leds/<led>/dcd
+Date:		February 2024
+KernelVersion:	6.8
+Description:
+		DCD = Data Carrier Detect
+		DTE is receiving a carrier from the DCE.
+		If the line state is detected, the LED is switched on.
+		If set to 0 (default), the LED will not evaluate CAR (DCD).
+		If set to 1, the LED will evaluate CAR (DCD).
+
+What:		/sys/class/leds/<led>/rng
+Date:		February 2024
+KernelVersion:	6.8
+Description:
+		RNG = Ring Indicator
+		DCE has detected an incoming ring signal on the telephone
+		line. If the line state is detected, the LED is switched on.
+		If set to 0 (default), the LED will not evaluate RNG.
+		If set to 1, the LED will evaluate RNG.
--- a/Documentation/devicetree/bindings/leds/allwinner,sun50i-a100-ledc.yaml
+++ b/Documentation/devicetree/bindings/leds/allwinner,sun50i-a100-ledc.yaml
@ -0,0 +1,137 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/allwinner,sun50i-a100-ledc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A100 LED Controller
+
+maintainers:
+  - Samuel Holland <samuel@sholland.org>
+
+description:
+  The LED controller found in Allwinner sunxi SoCs uses a one-wire serial
+  interface to drive up to 1024 RGB LEDs.
+
+properties:
+  compatible:
+    oneOf:
+      - const: allwinner,sun50i-a100-ledc
+      - items:
+          - enum:
+              - allwinner,sun20i-d1-ledc
+              - allwinner,sun50i-r329-ledc
+          - const: allwinner,sun50i-a100-ledc
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus clock
+      - description: Module clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: mod
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    maxItems: 1
+    description: TX DMA channel
+
+  dma-names:
+    const: tx
+
+  allwinner,pixel-format:
+    description: Pixel format (subpixel transmission order), default is "grb"
+    enum:
+      - bgr
+      - brg
+      - gbr
+      - grb
+      - rbg
+      - rgb
+
+  allwinner,t0h-ns:
+    default: 336
+    description: Length of high pulse when transmitting a "0" bit
+
+  allwinner,t0l-ns:
+    default: 840
+    description: Length of low pulse when transmitting a "0" bit
+
+  allwinner,t1h-ns:
+    default: 882
+    description: Length of high pulse when transmitting a "1" bit
+
+  allwinner,t1l-ns:
+    default: 294
+    description: Length of low pulse when transmitting a "1" bit
+
+  allwinner,treset-ns:
+    default: 300000
+    description: Minimum delay between transmission frames
+
+patternProperties:
+  "^multi-led@[0-9a-f]+$":
+    type: object
+    $ref: leds-class-multicolor.yaml#
+    unevaluatedProperties: false
+    properties:
+      reg:
+        minimum: 0
+        maximum: 1023
+        description: Index of the LED in the series (must be contiguous)
+
+    required:
+      - reg
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/leds/common.h>
+
+    ledc: led-controller@2008000 {
+      compatible = "allwinner,sun20i-d1-ledc",
+                   "allwinner,sun50i-a100-ledc";
+      reg = <0x2008000 0x400>;
+      interrupts = <36 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&ccu 12>, <&ccu 34>;
+      clock-names = "bus", "mod";
+      resets = <&ccu 12>;
+      dmas = <&dma 42>;
+      dma-names = "tx";
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      multi-led@0 {
+        reg = <0x0>;
+        color = <LED_COLOR_ID_RGB>;
+        function = LED_FUNCTION_INDICATOR;
+      };
+    };
+
+...
--- a/Documentation/devicetree/bindings/leds/awinic,aw200xx.yaml
+++ b/Documentation/devicetree/bindings/leds/awinic,aw200xx.yaml
@ -10,15 +10,19 @@ maintainers:
  - Martin Kurbanov <mmkurbanov@sberdevices.ru>

 description: |
-  This controller is present on AW20036/AW20054/AW20072.
-  It is a 3x12/6x9/6x12 matrix LED programmed via
-  an I2C interface, up to 36/54/72 LEDs or 12/18/24 RGBs,
-  3 pattern controllers for auto breathing or group dimming control.
+  It is a matrix LED driver programmed via an I2C interface. Devices have
+  a set of individually controlled leds and support 3 pattern controllers
+  for auto breathing or group dimming control. Supported devices:
+    - AW20036 (3x12) 36 LEDs
+    - AW20054 (6x9)  54 LEDs
+    - AW20072 (6x12) 72 LEDs
+    - AW20108 (9x12) 108 LEDs

  For more product information please see the link below:
  aw20036 - https://www.awinic.com/en/productDetail/AW20036QNR#tech-docs
  aw20054 - https://www.awinic.com/en/productDetail/AW20054QNR#tech-docs
  aw20072 - https://www.awinic.com/en/productDetail/AW20072QNR#tech-docs
+  aw20108 - https://www.awinic.com/en/productDetail/AW20108QNR#tech-docs

 properties:
  compatible:
@ -26,6 +30,7 @@ properties:
      - awinic,aw20036
      - awinic,aw20054
      - awinic,aw20072
+      - awinic,aw20108

  reg:
    maxItems: 1
@ -36,13 +41,11 @@ properties:
  "#size-cells":
    const: 0

-  awinic,display-rows:
-    $ref: /schemas/types.yaml#/definitions/uint32
-    description:
-      Leds matrix size
+  enable-gpios:
+    maxItems: 1

 patternProperties:
-  "^led@[0-9a-f]$":
+  "^led@[0-9a-f]+$":
    type: object
    $ref: common.yaml#
    unevaluatedProperties: false
@ -60,16 +63,11 @@ patternProperties:
          since the chip has a single global setting.
          The maximum output current of each LED is calculated by the
          following formula:
-            IMAXled = 160000 * (592 / 600.5) * (1 / display-rows)
+            IMAXled = 160000 * (592 / 600.5) * (1 / max-current-switch-number)
          And the minimum output current formula:
-            IMINled = 3300 * (592 / 600.5) * (1 / display-rows)
-
-required:
-  - compatible
-  - reg
-  - "#address-cells"
-  - "#size-cells"
-  - awinic,display-rows
+            IMINled = 3300 * (592 / 600.5) * (1 / max-current-switch-number)
+          where max-current-switch-number is determinated by led configuration
+          and depends on how leds are physically connected to the led driver.

 allOf:
  - if:
@ -78,18 +76,67 @@ allOf:
          contains:
            const: awinic,aw20036
    then:
+      patternProperties:
+        "^led@[0-9a-f]+$":
+          properties:
+            reg:
+              items:
+                minimum: 0
+                maximum: 36
+
+  - if:
      properties:
-        awinic,display-rows:
-          enum: [1, 2, 3]
-    else:
+        compatible:
+          contains:
+            const: awinic,aw20054
+    then:
+      patternProperties:
+        "^led@[0-9a-f]+$":
+          properties:
+            reg:
+              items:
+                minimum: 0
+                maximum: 54
+
+  - if:
      properties:
-        awinic,display-rows:
-          enum: [1, 2, 3, 4, 5, 6, 7]
+        compatible:
+          contains:
+            const: awinic,aw20072
+    then:
+      patternProperties:
+        "^led@[0-9a-f]+$":
+          properties:
+            reg:
+              items:
+                minimum: 0
+                maximum: 72
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: awinic,aw20108
+    then:
+      patternProperties:
+        "^led@[0-9a-f]+$":
+          properties:
+            reg:
+              items:
+                minimum: 0
+                maximum: 108
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"

 additionalProperties: false

 examples:
  - |
+    #include <dt-bindings/gpio/gpio.h>
    #include <dt-bindings/leds/common.h>

    i2c {
@ -101,7 +148,7 @@ examples:
            reg = <0x3a>;
            #address-cells = <1>;
            #size-cells = <0>;
-            awinic,display-rows = <3>;
+            enable-gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;

            led@0 {
                reg = <0x0>;
--- a/Documentation/devicetree/bindings/leds/common.yaml
+++ b/Documentation/devicetree/bindings/leds/common.yaml
@ -167,7 +167,7 @@ properties:
      Note that this flag is mainly used for PWM-LEDs, where it is not possible
      to map brightness to current. Drivers for other controllers should use
      led-max-microamp.
-    $ref: /schemas/types.yaml#definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32

  panic-indicator:
    description:
--- a/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml
+++ b/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml
@ -89,9 +89,11 @@ additionalProperties: false
 examples:
  - |
    #include <dt-bindings/leds/common.h>
-    spmi {
+
+    pmic {
        #address-cells = <1>;
        #size-cells = <0>;
+
        led-controller@ee00 {
            compatible = "qcom,pm8350c-flash-led", "qcom,spmi-flash-led";
            reg = <0xee00>;
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@ -95,14 +95,18 @@ config LEDS_ARIEL
 	  Say Y to if your machine is a Dell Wyse 3020 thin client.

 config LEDS_AW200XX
-	tristate "LED support for Awinic AW20036/AW20054/AW20072"
+	tristate "LED support for Awinic AW20036/AW20054/AW20072/AW20108"
 	depends on LEDS_CLASS
 	depends on I2C
 	help
-	  This option enables support for the AW20036/AW20054/AW20072 LED driver.
-	  It is a 3x12/6x9/6x12 matrix LED driver programmed via
-	  an I2C interface, up to 36/54/72 LEDs or 12/18/24 RGBs,
-	  3 pattern controllers for auto breathing or group dimming control.
+	  This option enables support for the Awinic AW200XX LED controllers.
+	  It is a matrix LED driver programmed via an I2C interface. Devices have
+	  a set of individually controlled LEDs and support 3 pattern controllers
+	  for auto breathing or group dimming control. Supported devices:
+	    - AW20036 (3x12) 36 LEDs
+	    - AW20054 (6x9)  54 LEDs
+	    - AW20072 (6x12) 72 LEDs
+	    - AW20108 (9x12) 108 LEDs

 	  To compile this driver as a module, choose M here: the module
 	  will be called leds-aw200xx.
@ -110,6 +114,7 @@ config LEDS_AW200XX
 config LEDS_AW2013
 	tristate "LED support for Awinic AW2013"
 	depends on LEDS_CLASS && I2C && OF
+	select REGMAP_I2C
 	help
 	  This option enables support for the AW2013 3-channel
 	  LED driver.
@ -298,6 +303,15 @@ config LEDS_COBALT_RAQ
 	help
 	  This option enables support for the Cobalt Raq series LEDs.

+config LEDS_SUN50I_A100
+	tristate "LED support for Allwinner A100 RGB LED controller"
+	depends on LEDS_CLASS_MULTICOLOR
+	depends on ARCH_SUNXI || COMPILE_TEST
+	help
+	  This option enables support for the RGB LED controller found
+	  in some Allwinner sunxi SoCs, including A100, R329, and D1.
+	  It uses a one-wire interface to control up to 1024 LEDs.
+
 config LEDS_SUNFIRE
 	tristate "LED support for SunFire servers."
 	depends on LEDS_CLASS
@ -638,6 +652,17 @@ config LEDS_ADP5520
 	  To compile this driver as a module, choose M here: the module will
 	  be called leds-adp5520.

+config LEDS_MAX5970
+	tristate "LED Support for Maxim 5970"
+	depends on LEDS_CLASS
+	depends on MFD_MAX5970
+	help
+	  This option enables support for the Maxim MAX5970 & MAX5978 smart
+	  switch indication LEDs via the I2C bus.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called leds-max5970.
+
 config LEDS_MC13783
 	tristate "LED Support for MC13XXX PMIC"
 	depends on LEDS_CLASS
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@ -56,6 +56,7 @@ obj-$(CONFIG_LEDS_LP8501)		+= leds-lp8501.o
 obj-$(CONFIG_LEDS_LP8788)		+= leds-lp8788.o
 obj-$(CONFIG_LEDS_LP8860)		+= leds-lp8860.o
 obj-$(CONFIG_LEDS_LT3593)		+= leds-lt3593.o
+obj-$(CONFIG_LEDS_MAX5970)		+= leds-max5970.o
 obj-$(CONFIG_LEDS_MAX77650)		+= leds-max77650.o
 obj-$(CONFIG_LEDS_MAX8997)		+= leds-max8997.o
 obj-$(CONFIG_LEDS_MC13783)		+= leds-mc13783.o
@ -78,6 +79,7 @@ obj-$(CONFIG_LEDS_POWERNV)		+= leds-powernv.o
 obj-$(CONFIG_LEDS_PWM)			+= leds-pwm.o
 obj-$(CONFIG_LEDS_REGULATOR)		+= leds-regulator.o
 obj-$(CONFIG_LEDS_SC27XX_BLTC)		+= leds-sc27xx-bltc.o
+obj-$(CONFIG_LEDS_SUN50I_A100)		+= leds-sun50i-a100.o
 obj-$(CONFIG_LEDS_SUNFIRE)		+= leds-sunfire.o
 obj-$(CONFIG_LEDS_SYSCON)		+= leds-syscon.o
 obj-$(CONFIG_LEDS_TCA6507)		+= leds-tca6507.o
--- a/drivers/leds/led-triggers.c
+++ b/drivers/leds/led-triggers.c
@ -269,19 +269,6 @@ void led_trigger_set_default(struct led_classdev *led_cdev)
 }
 EXPORT_SYMBOL_GPL(led_trigger_set_default);

-void led_trigger_rename_static(const char *name, struct led_trigger *trig)
-{
-	/* new name must be on a temporary string to prevent races */
-	BUG_ON(name == trig->name);
-
-	down_write(&triggers_list_lock);
-	/* this assumes that trig->name was originaly allocated to
-	 * non constant storage */
-	strcpy((char *)trig->name, name);
-	up_write(&triggers_list_lock);
-}
-EXPORT_SYMBOL_GPL(led_trigger_rename_static);
-
 /* LED Trigger Interface */

 int led_trigger_register(struct led_trigger *trig)
--- a/drivers/leds/leds-aw200xx.c
+++ b/drivers/leds/leds-aw200xx.c
@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Awinic AW20036/AW20054/AW20072 LED driver
+ * Awinic AW20036/AW20054/AW20072/AW20108 LED driver
 *
 * Copyright (c) 2023, SberDevices. All Rights Reserved.
 *
@ -10,6 +10,7 @@
 #include <linux/bitfield.h>
 #include <linux/bits.h>
 #include <linux/container_of.h>
+#include <linux/gpio/consumer.h>
 #include <linux/i2c.h>
 #include <linux/leds.h>
 #include <linux/mod_devicetable.h>
@ -74,6 +75,10 @@
 #define AW200XX_LED2REG(x, columns) \
 	((x) + (((x) / (columns)) * (AW200XX_DSIZE_COLUMNS_MAX - (columns))))

+/* DIM current configuration register on page 1 */
+#define AW200XX_REG_DIM_PAGE1(x, columns) \
+	AW200XX_REG(AW200XX_PAGE1, AW200XX_LED2REG(x, columns))
+
 /*
 * DIM current configuration register (page 4).
 * The even address for current DIM configuration.
@ -82,6 +87,8 @@
 #define AW200XX_REG_DIM(x, columns) \
 	AW200XX_REG(AW200XX_PAGE4, AW200XX_LED2REG(x, columns) * 2)
 #define AW200XX_REG_DIM2FADE(x) ((x) + 1)
+#define AW200XX_REG_FADE2DIM(fade) \
+	DIV_ROUND_UP((fade) * AW200XX_DIM_MAX, AW200XX_FADE_MAX)

 /*
 * Duty ratio of display scan (see p.15 of datasheet for formula):
@ -112,6 +119,7 @@ struct aw200xx {
 	struct mutex mutex;
 	u32 num_leds;
 	u32 display_rows;
+	struct gpio_desc *hwen;
 	struct aw200xx_led leds[] __counted_by(num_leds);
 };

@ -153,7 +161,8 @@ static ssize_t dim_store(struct device *dev, struct device_attribute *devattr,

 	if (dim >= 0) {
 		ret = regmap_write(chip->regmap,
-				   AW200XX_REG_DIM(led->num, columns), dim);
+				   AW200XX_REG_DIM_PAGE1(led->num, columns),
+				   dim);
 		if (ret)
 			goto out_unlock;
 	}
@ -188,9 +197,7 @@ static int aw200xx_brightness_set(struct led_classdev *cdev,

 	dim = led->dim;
 	if (dim < 0)
-		dim = max_t(int,
-			    brightness / (AW200XX_FADE_MAX / AW200XX_DIM_MAX),
-			    1);
+		dim = AW200XX_REG_FADE2DIM(brightness);

 	ret = regmap_write(chip->regmap, reg, dim);
 	if (ret)
@ -314,6 +321,9 @@ static int aw200xx_chip_reset(const struct aw200xx *const chip)
 	if (ret)
 		return ret;

+	/* According to the datasheet software reset takes at least 1ms */
+	fsleep(1000);
+
 	regcache_mark_dirty(chip->regmap);
 	return regmap_write(chip->regmap, AW200XX_REG_FCD, AW200XX_FCD_CLEAR);
 }
@ -353,6 +363,50 @@ static int aw200xx_chip_check(const struct aw200xx *const chip)
 	return 0;
 }

+static void aw200xx_enable(const struct aw200xx *const chip)
+{
+	gpiod_set_value_cansleep(chip->hwen, 1);
+
+	/*
+	 * After HWEN pin set high the chip begins to load the OTP information,
+	 * which takes 200us to complete. About 200us wait time is needed for
+	 * internal oscillator startup and display SRAM initialization. After
+	 * display SRAM initialization, the registers in page1 to page5 can be
+	 * configured via i2c interface.
+	 */
+	fsleep(400);
+}
+
+static void aw200xx_disable(const struct aw200xx *const chip)
+{
+	return gpiod_set_value_cansleep(chip->hwen, 0);
+}
+
+static int aw200xx_probe_get_display_rows(struct device *dev,
+					  struct aw200xx *chip)
+{
+	struct fwnode_handle *child;
+	u32 max_source = 0;
+
+	device_for_each_child_node(dev, child) {
+		u32 source;
+		int ret;
+
+		ret = fwnode_property_read_u32(child, "reg", &source);
+		if (ret || source >= chip->cdef->channels)
+			continue;
+
+		max_source = max(max_source, source);
+	}
+
+	if (max_source == 0)
+		return -EINVAL;
+
+	chip->display_rows = max_source / chip->cdef->display_size_columns + 1;
+
+	return 0;
+}
+
 static int aw200xx_probe_fw(struct device *dev, struct aw200xx *chip)
 {
 	struct fwnode_handle *child;
@ -360,18 +414,10 @@ static int aw200xx_probe_fw(struct device *dev, struct aw200xx *chip)
 	int ret;
 	int i;

-	ret = device_property_read_u32(dev, "awinic,display-rows",
-				       &chip->display_rows);
+	ret = aw200xx_probe_get_display_rows(dev, chip);
 	if (ret)
 		return dev_err_probe(dev, ret,
-				     "Failed to read 'display-rows' property\n");
-
-	if (!chip->display_rows ||
-	    chip->display_rows > chip->cdef->display_size_rows_max) {
-		return dev_err_probe(dev, -EINVAL,
-				     "Invalid leds display size %u\n",
-				     chip->display_rows);
-	}
+				     "No valid led definitions found\n");

 	current_max = aw200xx_imax_from_global(chip, AW200XX_IMAX_MAX_uA);
 	current_min = aw200xx_imax_from_global(chip, AW200XX_IMAX_MIN_uA);
@ -416,6 +462,7 @@ static int aw200xx_probe_fw(struct device *dev, struct aw200xx *chip)
 		led->num = source;
 		led->chip = chip;
 		led->cdev.brightness_set_blocking = aw200xx_brightness_set;
+		led->cdev.max_brightness = AW200XX_FADE_MAX;
 		led->cdev.groups = dim_groups;
 		init_data.fwnode = child;

@ -480,6 +527,7 @@ static const struct regmap_config aw200xx_regmap_config = {
 	.rd_table = &aw200xx_readable_table,
 	.wr_table = &aw200xx_writeable_table,
 	.cache_type = REGCACHE_MAPLE,
+	.disable_locking = true,
 };

 static int aw200xx_probe(struct i2c_client *client)
@ -512,6 +560,14 @@ static int aw200xx_probe(struct i2c_client *client)
 	if (IS_ERR(chip->regmap))
 		return PTR_ERR(chip->regmap);

+	chip->hwen = devm_gpiod_get_optional(&client->dev, "enable",
+					     GPIOD_OUT_HIGH);
+	if (IS_ERR(chip->hwen))
+		return dev_err_probe(&client->dev, PTR_ERR(chip->hwen),
+				     "Cannot get enable GPIO");
+
+	aw200xx_enable(chip);
+
 	ret = aw200xx_chip_check(chip);
 	if (ret)
 		return ret;
@ -532,6 +588,9 @@ static int aw200xx_probe(struct i2c_client *client)
 	ret = aw200xx_chip_init(chip);

 out_unlock:
+	if (ret)
+		aw200xx_disable(chip);
+
 	mutex_unlock(&chip->mutex);
 	return ret;
 }
@ -541,6 +600,7 @@ static void aw200xx_remove(struct i2c_client *client)
 	struct aw200xx *chip = i2c_get_clientdata(client);

 	aw200xx_chip_reset(chip);
+	aw200xx_disable(chip);
 	mutex_destroy(&chip->mutex);
 }

@ -562,10 +622,17 @@ static const struct aw200xx_chipdef aw20072_cdef = {
 	.display_size_columns = 12,
 };

+static const struct aw200xx_chipdef aw20108_cdef = {
+	.channels = 108,
+	.display_size_rows_max = 9,
+	.display_size_columns = 12,
+};
+
 static const struct i2c_device_id aw200xx_id[] = {
 	{ "aw20036" },
 	{ "aw20054" },
 	{ "aw20072" },
+	{ "aw20108" },
 	{}
 };
 MODULE_DEVICE_TABLE(i2c, aw200xx_id);
@ -574,6 +641,7 @@ static const struct of_device_id aw200xx_match_table[] = {
 	{ .compatible = "awinic,aw20036", .data = &aw20036_cdef, },
 	{ .compatible = "awinic,aw20054", .data = &aw20054_cdef, },
 	{ .compatible = "awinic,aw20072", .data = &aw20072_cdef, },
+	{ .compatible = "awinic,aw20108", .data = &aw20108_cdef, },
 	{}
 };
 MODULE_DEVICE_TABLE(of, aw200xx_match_table);
--- a/drivers/leds/leds-gpio.c
+++ b/drivers/leds/leds-gpio.c
@ -172,6 +172,8 @@ static struct gpio_leds_priv *gpio_leds_create(struct device *dev)
 		led.gpiod = devm_fwnode_gpiod_get(dev, child, NULL, GPIOD_ASIS,
 						  NULL);
 		if (IS_ERR(led.gpiod)) {
+			dev_err_probe(dev, PTR_ERR(led.gpiod), "Failed to get GPIO '%pfw'\n",
+				      child);
 			fwnode_handle_put(child);
 			return ERR_CAST(led.gpiod);
 		}
--- a/drivers/leds/leds-max5970.c
+++ b/drivers/leds/leds-max5970.c
@ -0,0 +1,111 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device driver for leds in MAX5970 and MAX5978 IC
+ *
+ * Copyright (c) 2022 9elements GmbH
+ *
+ * Author: Patrick Rudolph <patrick.rudolph@9elements.com>
+ */
+
+#include <linux/bits.h>
+#include <linux/container_of.h>
+#include <linux/device.h>
+#include <linux/leds.h>
+#include <linux/mfd/max5970.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+
+#define ldev_to_maxled(c)       container_of(c, struct max5970_led, cdev)
+
+struct max5970_led {
+	struct device *dev;
+	struct regmap *regmap;
+	struct led_classdev cdev;
+	unsigned int index;
+};
+
+static int max5970_led_set_brightness(struct led_classdev *cdev,
+				      enum led_brightness brightness)
+{
+	struct max5970_led *ddata = ldev_to_maxled(cdev);
+	int ret, val;
+
+	/* Set/clear corresponding bit for given led index */
+	val = !brightness ? BIT(ddata->index) : 0;
+
+	ret = regmap_update_bits(ddata->regmap, MAX5970_REG_LED_FLASH, BIT(ddata->index), val);
+	if (ret < 0)
+		dev_err(cdev->dev, "failed to set brightness %d", ret);
+
+	return ret;
+}
+
+static int max5970_led_probe(struct platform_device *pdev)
+{
+	struct fwnode_handle *led_node, *child;
+	struct device *dev = &pdev->dev;
+	struct regmap *regmap;
+	struct max5970_led *ddata;
+	int ret = -ENODEV;
+
+	regmap = dev_get_regmap(dev->parent, NULL);
+	if (!regmap)
+		return -ENODEV;
+
+	led_node = device_get_named_child_node(dev->parent, "leds");
+	if (!led_node)
+		return -ENODEV;
+
+	fwnode_for_each_available_child_node(led_node, child) {
+		u32 reg;
+
+		if (fwnode_property_read_u32(child, "reg", &reg))
+			continue;
+
+		if (reg >= MAX5970_NUM_LEDS) {
+			dev_err_probe(dev, -EINVAL, "invalid LED (%u >= %d)\n", reg, MAX5970_NUM_LEDS);
+			continue;
+		}
+
+		ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
+		if (!ddata) {
+			fwnode_handle_put(child);
+			return -ENOMEM;
+		}
+
+		ddata->index = reg;
+		ddata->regmap = regmap;
+		ddata->dev = dev;
+
+		if (fwnode_property_read_string(child, "label", &ddata->cdev.name))
+			ddata->cdev.name = fwnode_get_name(child);
+
+		ddata->cdev.max_brightness = 1;
+		ddata->cdev.brightness_set_blocking = max5970_led_set_brightness;
+		ddata->cdev.default_trigger = "none";
+
+		ret = devm_led_classdev_register(dev, &ddata->cdev);
+		if (ret < 0) {
+			fwnode_handle_put(child);
+			return dev_err_probe(dev, ret, "Failed to initialize LED %u\n", reg);
+		}
+	}
+
+	return ret;
+}
+
+static struct platform_driver max5970_led_driver = {
+	.driver = {
+		.name = "max5970-led",
+	},
+	.probe = max5970_led_probe,
+};
+module_platform_driver(max5970_led_driver);
+
+MODULE_AUTHOR("Patrick Rudolph <patrick.rudolph@9elements.com>");
+MODULE_AUTHOR("Naresh Solanki <Naresh.Solanki@9elements.com>");
+MODULE_DESCRIPTION("MAX5970_hot-swap controller LED driver");
+MODULE_LICENSE("GPL");
--- a/drivers/leds/leds-sun50i-a100.c
+++ b/drivers/leds/leds-sun50i-a100.c
@ -0,0 +1,584 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021-2023 Samuel Holland <samuel@sholland.org>
+ *
+ * Partly based on drivers/leds/leds-turris-omnia.c, which is:
+ *     Copyright (c) 2020 by Marek Behún <kabel@kernel.org>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/led-class-multicolor.h>
+#include <linux/leds.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/property.h>
+#include <linux/reset.h>
+#include <linux/spinlock.h>
+
+#define LEDC_CTRL_REG			0x0000
+#define LEDC_CTRL_REG_DATA_LENGTH		GENMASK(28, 16)
+#define LEDC_CTRL_REG_RGB_MODE			GENMASK(8, 6)
+#define LEDC_CTRL_REG_LEDC_EN			BIT(0)
+#define LEDC_T01_TIMING_CTRL_REG	0x0004
+#define LEDC_T01_TIMING_CTRL_REG_T1H		GENMASK(26, 21)
+#define LEDC_T01_TIMING_CTRL_REG_T1L		GENMASK(20, 16)
+#define LEDC_T01_TIMING_CTRL_REG_T0H		GENMASK(10, 6)
+#define LEDC_T01_TIMING_CTRL_REG_T0L		GENMASK(5, 0)
+#define LEDC_RESET_TIMING_CTRL_REG	0x000c
+#define LEDC_RESET_TIMING_CTRL_REG_TR		GENMASK(28, 16)
+#define LEDC_RESET_TIMING_CTRL_REG_LED_NUM	GENMASK(9, 0)
+#define LEDC_DATA_REG			0x0014
+#define LEDC_DMA_CTRL_REG		0x0018
+#define LEDC_DMA_CTRL_REG_DMA_EN		BIT(5)
+#define LEDC_DMA_CTRL_REG_FIFO_TRIG_LEVEL	GENMASK(4, 0)
+#define LEDC_INT_CTRL_REG		0x001c
+#define LEDC_INT_CTRL_REG_GLOBAL_INT_EN		BIT(5)
+#define LEDC_INT_CTRL_REG_FIFO_CPUREQ_INT_EN	BIT(1)
+#define LEDC_INT_CTRL_REG_TRANS_FINISH_INT_EN	BIT(0)
+#define LEDC_INT_STS_REG		0x0020
+#define LEDC_INT_STS_REG_FIFO_WLW		GENMASK(15, 10)
+#define LEDC_INT_STS_REG_FIFO_CPUREQ_INT	BIT(1)
+#define LEDC_INT_STS_REG_TRANS_FINISH_INT	BIT(0)
+
+#define LEDC_FIFO_DEPTH			32U
+#define LEDC_MAX_LEDS			1024
+#define LEDC_CHANNELS_PER_LED		3 /* RGB */
+
+#define LEDS_TO_BYTES(n)		((n) * sizeof(u32))
+
+struct sun50i_a100_ledc_led {
+	struct led_classdev_mc mc_cdev;
+	struct mc_subled subled_info[LEDC_CHANNELS_PER_LED];
+	u32 addr;
+};
+
+#define to_ledc_led(mc) container_of(mc, struct sun50i_a100_ledc_led, mc_cdev)
+
+struct sun50i_a100_ledc_timing {
+	u32 t0h_ns;
+	u32 t0l_ns;
+	u32 t1h_ns;
+	u32 t1l_ns;
+	u32 treset_ns;
+};
+
+struct sun50i_a100_ledc {
+	struct device *dev;
+	void __iomem *base;
+	struct clk *bus_clk;
+	struct clk *mod_clk;
+	struct reset_control *reset;
+
+	u32 *buffer;
+	struct dma_chan *dma_chan;
+	dma_addr_t dma_handle;
+	unsigned int pio_length;
+	unsigned int pio_offset;
+
+	spinlock_t lock;
+	unsigned int next_length;
+	bool xfer_active;
+
+	u32 format;
+	struct sun50i_a100_ledc_timing timing;
+
+	u32 max_addr;
+	u32 num_leds;
+	struct sun50i_a100_ledc_led leds[] __counted_by(num_leds);
+};
+
+static int sun50i_a100_ledc_dma_xfer(struct sun50i_a100_ledc *priv, unsigned int length)
+{
+	struct dma_async_tx_descriptor *desc;
+	dma_cookie_t cookie;
+
+	desc = dmaengine_prep_slave_single(priv->dma_chan, priv->dma_handle,
+					   LEDS_TO_BYTES(length), DMA_MEM_TO_DEV, 0);
+	if (!desc)
+		return -ENOMEM;
+
+	cookie = dmaengine_submit(desc);
+	if (dma_submit_error(cookie))
+		return -EIO;
+
+	dma_async_issue_pending(priv->dma_chan);
+
+	return 0;
+}
+
+static void sun50i_a100_ledc_pio_xfer(struct sun50i_a100_ledc *priv, unsigned int fifo_used)
+{
+	unsigned int burst, length, offset;
+	u32 control;
+
+	length = priv->pio_length;
+	offset = priv->pio_offset;
+	burst  = min(length, LEDC_FIFO_DEPTH - fifo_used);
+
+	iowrite32_rep(priv->base + LEDC_DATA_REG, priv->buffer + offset, burst);
+
+	if (burst < length) {
+		priv->pio_length = length - burst;
+		priv->pio_offset = offset + burst;
+
+		if (!offset) {
+			control = readl(priv->base + LEDC_INT_CTRL_REG);
+			control |= LEDC_INT_CTRL_REG_FIFO_CPUREQ_INT_EN;
+			writel(control, priv->base + LEDC_INT_CTRL_REG);
+		}
+	} else {
+		/* Disable the request IRQ once all data is written. */
+		control = readl(priv->base + LEDC_INT_CTRL_REG);
+		control &= ~LEDC_INT_CTRL_REG_FIFO_CPUREQ_INT_EN;
+		writel(control, priv->base + LEDC_INT_CTRL_REG);
+	}
+}
+
+static void sun50i_a100_ledc_start_xfer(struct sun50i_a100_ledc *priv, unsigned int length)
+{
+	bool use_dma = false;
+	u32 control;
+
+	if (priv->dma_chan && length > LEDC_FIFO_DEPTH) {
+		int ret;
+
+		ret = sun50i_a100_ledc_dma_xfer(priv, length);
+		if (ret)
+			dev_warn(priv->dev, "Failed to set up DMA (%d), using PIO\n", ret);
+		else
+			use_dma = true;
+	}
+
+	/* The DMA trigger level must be at least the burst length. */
+	control = FIELD_PREP(LEDC_DMA_CTRL_REG_DMA_EN, use_dma) |
+		  FIELD_PREP_CONST(LEDC_DMA_CTRL_REG_FIFO_TRIG_LEVEL, LEDC_FIFO_DEPTH / 2);
+	writel(control, priv->base + LEDC_DMA_CTRL_REG);
+
+	control = readl(priv->base + LEDC_CTRL_REG);
+	control &= ~LEDC_CTRL_REG_DATA_LENGTH;
+	control |= FIELD_PREP(LEDC_CTRL_REG_DATA_LENGTH, length) | LEDC_CTRL_REG_LEDC_EN;
+	writel(control, priv->base + LEDC_CTRL_REG);
+
+	if (!use_dma) {
+		/* The FIFO is empty when starting a new transfer. */
+		unsigned int fifo_used = 0;
+
+		priv->pio_length = length;
+		priv->pio_offset = 0;
+
+		sun50i_a100_ledc_pio_xfer(priv, fifo_used);
+	}
+}
+
+static irqreturn_t sun50i_a100_ledc_irq(int irq, void *data)
+{
+	struct sun50i_a100_ledc *priv = data;
+	u32 status;
+
+	status = readl(priv->base + LEDC_INT_STS_REG);
+
+	if (status & LEDC_INT_STS_REG_TRANS_FINISH_INT) {
+		unsigned int next_length;
+
+		spin_lock(&priv->lock);
+
+		/* If another transfer is queued, dequeue and start it. */
+		next_length = priv->next_length;
+		if (next_length)
+			priv->next_length = 0;
+		else
+			priv->xfer_active = false;
+
+		spin_unlock(&priv->lock);
+
+		if (next_length)
+			sun50i_a100_ledc_start_xfer(priv, next_length);
+	} else if (status & LEDC_INT_STS_REG_FIFO_CPUREQ_INT) {
+		/* Continue the current transfer. */
+		sun50i_a100_ledc_pio_xfer(priv, FIELD_GET(LEDC_INT_STS_REG_FIFO_WLW, status));
+	}
+
+	/* Clear the W1C status bits. */
+	writel(status, priv->base + LEDC_INT_STS_REG);
+
+	return IRQ_HANDLED;
+}
+
+static void sun50i_a100_ledc_brightness_set(struct led_classdev *cdev,
+					    enum led_brightness brightness)
+{
+	struct sun50i_a100_ledc *priv = dev_get_drvdata(cdev->dev->parent);
+	struct led_classdev_mc *mc_cdev = lcdev_to_mccdev(cdev);
+	struct sun50i_a100_ledc_led *led = to_ledc_led(mc_cdev);
+	unsigned int next_length;
+	unsigned long flags;
+	bool xfer_active;
+
+	led_mc_calc_color_components(mc_cdev, brightness);
+
+	priv->buffer[led->addr] = led->subled_info[0].brightness << 16 |
+				  led->subled_info[1].brightness <<  8 |
+				  led->subled_info[2].brightness;
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	/* Start, enqueue, or extend an enqueued transfer, as appropriate. */
+	next_length = max(priv->next_length, led->addr + 1);
+	xfer_active = priv->xfer_active;
+	if (xfer_active)
+		priv->next_length = next_length;
+	else
+		priv->xfer_active = true;
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	if (!xfer_active)
+		sun50i_a100_ledc_start_xfer(priv, next_length);
+}
+
+static const char *const sun50i_a100_ledc_formats[] = {
+	"rgb", "rbg", "grb", "gbr", "brg", "bgr",
+};
+
+static int sun50i_a100_ledc_parse_format(struct device *dev,
+					 struct sun50i_a100_ledc *priv)
+{
+	const char *format = "grb";
+	u32 i;
+
+	device_property_read_string(dev, "allwinner,pixel-format", &format);
+
+	for (i = 0; i < ARRAY_SIZE(sun50i_a100_ledc_formats); i++) {
+		if (!strcmp(format, sun50i_a100_ledc_formats[i])) {
+			priv->format = i;
+			return 0;
+		}
+	}
+
+	return dev_err_probe(dev, -EINVAL, "Bad pixel format '%s'\n", format);
+}
+
+static void sun50i_a100_ledc_set_format(struct sun50i_a100_ledc *priv)
+{
+	u32 control;
+
+	control = readl(priv->base + LEDC_CTRL_REG);
+	control &= ~LEDC_CTRL_REG_RGB_MODE;
+	control |= FIELD_PREP(LEDC_CTRL_REG_RGB_MODE, priv->format);
+	writel(control, priv->base + LEDC_CTRL_REG);
+}
+
+static const struct sun50i_a100_ledc_timing sun50i_a100_ledc_default_timing = {
+	.t0h_ns = 336,
+	.t0l_ns = 840,
+	.t1h_ns = 882,
+	.t1l_ns = 294,
+	.treset_ns = 300000,
+};
+
+static int sun50i_a100_ledc_parse_timing(struct device *dev,
+					 struct sun50i_a100_ledc *priv)
+{
+	struct sun50i_a100_ledc_timing *timing = &priv->timing;
+
+	*timing = sun50i_a100_ledc_default_timing;
+
+	device_property_read_u32(dev, "allwinner,t0h-ns", &timing->t0h_ns);
+	device_property_read_u32(dev, "allwinner,t0l-ns", &timing->t0l_ns);
+	device_property_read_u32(dev, "allwinner,t1h-ns", &timing->t1h_ns);
+	device_property_read_u32(dev, "allwinner,t1l-ns", &timing->t1l_ns);
+	device_property_read_u32(dev, "allwinner,treset-ns", &timing->treset_ns);
+
+	return 0;
+}
+
+static void sun50i_a100_ledc_set_timing(struct sun50i_a100_ledc *priv)
+{
+	const struct sun50i_a100_ledc_timing *timing = &priv->timing;
+	unsigned long mod_freq = clk_get_rate(priv->mod_clk);
+	u32 cycle_ns;
+	u32 control;
+
+	if (!mod_freq)
+		return;
+
+	cycle_ns = NSEC_PER_SEC / mod_freq;
+	control = FIELD_PREP(LEDC_T01_TIMING_CTRL_REG_T1H, timing->t1h_ns / cycle_ns) |
+		  FIELD_PREP(LEDC_T01_TIMING_CTRL_REG_T1L, timing->t1l_ns / cycle_ns) |
+		  FIELD_PREP(LEDC_T01_TIMING_CTRL_REG_T0H, timing->t0h_ns / cycle_ns) |
+		  FIELD_PREP(LEDC_T01_TIMING_CTRL_REG_T0L, timing->t0l_ns / cycle_ns);
+	writel(control, priv->base + LEDC_T01_TIMING_CTRL_REG);
+
+	control = FIELD_PREP(LEDC_RESET_TIMING_CTRL_REG_TR, timing->treset_ns / cycle_ns) |
+		  FIELD_PREP(LEDC_RESET_TIMING_CTRL_REG_LED_NUM, priv->max_addr);
+	writel(control, priv->base + LEDC_RESET_TIMING_CTRL_REG);
+}
+
+static int sun50i_a100_ledc_resume(struct device *dev)
+{
+	struct sun50i_a100_ledc *priv = dev_get_drvdata(dev);
+	int ret;
+
+	ret = reset_control_deassert(priv->reset);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(priv->bus_clk);
+	if (ret)
+		goto err_assert_reset;
+
+	ret = clk_prepare_enable(priv->mod_clk);
+	if (ret)
+		goto err_disable_bus_clk;
+
+	sun50i_a100_ledc_set_format(priv);
+	sun50i_a100_ledc_set_timing(priv);
+
+	writel(LEDC_INT_CTRL_REG_GLOBAL_INT_EN | LEDC_INT_CTRL_REG_TRANS_FINISH_INT_EN,
+	       priv->base + LEDC_INT_CTRL_REG);
+
+	return 0;
+
+err_disable_bus_clk:
+	clk_disable_unprepare(priv->bus_clk);
+err_assert_reset:
+	reset_control_assert(priv->reset);
+
+	return ret;
+}
+
+static int sun50i_a100_ledc_suspend(struct device *dev)
+{
+	struct sun50i_a100_ledc *priv = dev_get_drvdata(dev);
+
+	/* Wait for all transfers to complete. */
+	for (;;) {
+		unsigned long flags;
+		bool xfer_active;
+
+		spin_lock_irqsave(&priv->lock, flags);
+		xfer_active = priv->xfer_active;
+		spin_unlock_irqrestore(&priv->lock, flags);
+		if (!xfer_active)
+			break;
+
+		msleep(1);
+	}
+
+	clk_disable_unprepare(priv->mod_clk);
+	clk_disable_unprepare(priv->bus_clk);
+	reset_control_assert(priv->reset);
+
+	return 0;
+}
+
+static void sun50i_a100_ledc_dma_cleanup(void *data)
+{
+	struct sun50i_a100_ledc *priv = data;
+
+	dma_release_channel(priv->dma_chan);
+}
+
+static int sun50i_a100_ledc_probe(struct platform_device *pdev)
+{
+	struct dma_slave_config dma_cfg = {};
+	struct led_init_data init_data = {};
+	struct sun50i_a100_ledc_led *led;
+	struct device *dev = &pdev->dev;
+	struct sun50i_a100_ledc *priv;
+	struct fwnode_handle *child;
+	struct resource *mem;
+	u32 max_addr = 0;
+	u32 num_leds = 0;
+	int irq, ret;
+
+	/*
+	 * The maximum LED address must be known in sun50i_a100_ledc_resume() before
+	 * class device registration, so parse and validate the subnodes up front.
+	 */
+	device_for_each_child_node(dev, child) {
+		u32 addr, color;
+
+		ret = fwnode_property_read_u32(child, "reg", &addr);
+		if (ret || addr >= LEDC_MAX_LEDS) {
+			fwnode_handle_put(child);
+			return dev_err_probe(dev, -EINVAL, "'reg' must be between 0 and %d\n",
+					     LEDC_MAX_LEDS - 1);
+		}
+
+		ret = fwnode_property_read_u32(child, "color", &color);
+		if (ret || color != LED_COLOR_ID_RGB) {
+			fwnode_handle_put(child);
+			return dev_err_probe(dev, -EINVAL, "'color' must be LED_COLOR_ID_RGB\n");
+		}
+
+		max_addr = max(max_addr, addr);
+		num_leds++;
+	}
+
+	if (!num_leds)
+		return -ENODEV;
+
+	priv = devm_kzalloc(dev, struct_size(priv, leds, num_leds), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = dev;
+	priv->max_addr = max_addr;
+	priv->num_leds = num_leds;
+	spin_lock_init(&priv->lock);
+	dev_set_drvdata(dev, priv);
+
+	ret = sun50i_a100_ledc_parse_format(dev, priv);
+	if (ret)
+		return ret;
+
+	ret = sun50i_a100_ledc_parse_timing(dev, priv);
+	if (ret)
+		return ret;
+
+	priv->base = devm_platform_get_and_ioremap_resource(pdev, 0, &mem);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	priv->bus_clk = devm_clk_get(dev, "bus");
+	if (IS_ERR(priv->bus_clk))
+		return PTR_ERR(priv->bus_clk);
+
+	priv->mod_clk = devm_clk_get(dev, "mod");
+	if (IS_ERR(priv->mod_clk))
+		return PTR_ERR(priv->mod_clk);
+
+	priv->reset = devm_reset_control_get_exclusive(dev, NULL);
+	if (IS_ERR(priv->reset))
+		return PTR_ERR(priv->reset);
+
+	priv->dma_chan = dma_request_chan(dev, "tx");
+	if (IS_ERR(priv->dma_chan)) {
+		if (PTR_ERR(priv->dma_chan) != -ENODEV)
+			return PTR_ERR(priv->dma_chan);
+
+		priv->dma_chan = NULL;
+
+		priv->buffer = devm_kzalloc(dev, LEDS_TO_BYTES(LEDC_MAX_LEDS), GFP_KERNEL);
+		if (!priv->buffer)
+			return -ENOMEM;
+	} else {
+		ret = devm_add_action_or_reset(dev, sun50i_a100_ledc_dma_cleanup, priv);
+		if (ret)
+			return ret;
+
+		dma_cfg.dst_addr	= mem->start + LEDC_DATA_REG;
+		dma_cfg.dst_addr_width	= DMA_SLAVE_BUSWIDTH_4_BYTES;
+		dma_cfg.dst_maxburst	= LEDC_FIFO_DEPTH / 2;
+
+		ret = dmaengine_slave_config(priv->dma_chan, &dma_cfg);
+		if (ret)
+			return ret;
+
+		priv->buffer = dmam_alloc_attrs(dmaengine_get_dma_device(priv->dma_chan),
+						LEDS_TO_BYTES(LEDC_MAX_LEDS), &priv->dma_handle,
+						GFP_KERNEL, DMA_ATTR_WRITE_COMBINE);
+		if (!priv->buffer)
+			return -ENOMEM;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	ret = devm_request_irq(dev, irq, sun50i_a100_ledc_irq, 0, dev_name(dev), priv);
+	if (ret)
+		return ret;
+
+	ret = sun50i_a100_ledc_resume(dev);
+	if (ret)
+		return ret;
+
+	led = priv->leds;
+	device_for_each_child_node(dev, child) {
+		struct led_classdev *cdev;
+
+		/* The node was already validated above. */
+		fwnode_property_read_u32(child, "reg", &led->addr);
+
+		led->subled_info[0].color_index = LED_COLOR_ID_RED;
+		led->subled_info[0].channel = 0;
+		led->subled_info[1].color_index = LED_COLOR_ID_GREEN;
+		led->subled_info[1].channel = 1;
+		led->subled_info[2].color_index = LED_COLOR_ID_BLUE;
+		led->subled_info[2].channel = 2;
+
+		led->mc_cdev.num_colors = ARRAY_SIZE(led->subled_info);
+		led->mc_cdev.subled_info = led->subled_info;
+
+		cdev = &led->mc_cdev.led_cdev;
+		cdev->max_brightness = U8_MAX;
+		cdev->brightness_set = sun50i_a100_ledc_brightness_set;
+
+		init_data.fwnode = child;
+
+		ret = led_classdev_multicolor_register_ext(dev, &led->mc_cdev, &init_data);
+		if (ret) {
+			dev_err_probe(dev, ret, "Failed to register multicolor LED %u", led->addr);
+			goto err_put_child;
+		}
+
+		led++;
+	}
+
+	dev_info(dev, "Registered %u LEDs\n", num_leds);
+
+	return 0;
+
+err_put_child:
+	fwnode_handle_put(child);
+	while (led-- > priv->leds)
+		led_classdev_multicolor_unregister(&led->mc_cdev);
+	sun50i_a100_ledc_suspend(&pdev->dev);
+
+	return ret;
+}
+
+static void sun50i_a100_ledc_remove(struct platform_device *pdev)
+{
+	struct sun50i_a100_ledc *priv = platform_get_drvdata(pdev);
+
+	for (u32 i = 0; i < priv->num_leds; i++)
+		led_classdev_multicolor_unregister(&priv->leds[i].mc_cdev);
+	sun50i_a100_ledc_suspend(&pdev->dev);
+}
+
+static const struct of_device_id sun50i_a100_ledc_of_match[] = {
+	{ .compatible = "allwinner,sun50i-a100-ledc" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, sun50i_a100_ledc_of_match);
+
+static DEFINE_SIMPLE_DEV_PM_OPS(sun50i_a100_ledc_pm,
+				sun50i_a100_ledc_suspend,
+				sun50i_a100_ledc_resume);
+
+static struct platform_driver sun50i_a100_ledc_driver = {
+	.probe		= sun50i_a100_ledc_probe,
+	.remove_new	= sun50i_a100_ledc_remove,
+	.shutdown	= sun50i_a100_ledc_remove,
+	.driver		= {
+		.name		= "sun50i-a100-ledc",
+		.of_match_table	= sun50i_a100_ledc_of_match,
+		.pm		= pm_ptr(&sun50i_a100_ledc_pm),
+	},
+};
+module_platform_driver(sun50i_a100_ledc_driver);
+
+MODULE_AUTHOR("Samuel Holland <samuel@sholland.org>");
+MODULE_DESCRIPTION("Allwinner A100 LED controller driver");
+MODULE_LICENSE("GPL");
--- a/drivers/leds/leds-syscon.c
+++ b/drivers/leds/leds-syscon.c
@ -81,7 +81,8 @@ static int syscon_led_probe(struct platform_device *pdev)

 	sled->map = map;

-	if (of_property_read_u32(np, "offset", &sled->offset))
+	if (of_property_read_u32(np, "reg", &sled->offset) &&
+	    of_property_read_u32(np, "offset", &sled->offset))
 		return -EINVAL;
 	if (of_property_read_u32(np, "mask", &sled->mask))
 		return -EINVAL;
--- a/drivers/leds/leds-tca6507.c
+++ b/drivers/leds/leds-tca6507.c
@ -638,19 +638,13 @@ static int tca6507_probe_gpios(struct device *dev,
 	tca->gpio.direction_output = tca6507_gpio_direction_output;
 	tca->gpio.set = tca6507_gpio_set_value;
 	tca->gpio.parent = dev;
-	err = gpiochip_add_data(&tca->gpio, tca);
+	err = devm_gpiochip_add_data(dev, &tca->gpio, tca);
 	if (err) {
 		tca->gpio.ngpio = 0;
 		return err;
 	}
 	return 0;
 }
-
-static void tca6507_remove_gpio(struct tca6507_chip *tca)
-{
-	if (tca->gpio.ngpio)
-		gpiochip_remove(&tca->gpio);
-}
 #else /* CONFIG_GPIOLIB */
 static int tca6507_probe_gpios(struct device *dev,
 			       struct tca6507_chip *tca,
@ -658,9 +652,6 @@ static int tca6507_probe_gpios(struct device *dev,
 {
 	return 0;
 }
-static void tca6507_remove_gpio(struct tca6507_chip *tca)
-{
-}
 #endif /* CONFIG_GPIOLIB */

 static struct tca6507_platform_data *
@ -762,38 +753,25 @@ static int tca6507_probe(struct i2c_client *client)
 			l->led_cdev.brightness_set = tca6507_brightness_set;
 			l->led_cdev.blink_set = tca6507_blink_set;
 			l->bank = -1;
-			err = led_classdev_register(dev, &l->led_cdev);
+			err = devm_led_classdev_register(dev, &l->led_cdev);
 			if (err < 0)
-				goto exit;
+				return err;
 		}
 	}
 	err = tca6507_probe_gpios(dev, tca, pdata);
 	if (err)
-		goto exit;
+		return err;
 	/* set all registers to known state - zero */
 	tca->reg_set = 0x7f;
 	schedule_work(&tca->work);

 	return 0;
-exit:
-	while (i--) {
-		if (tca->leds[i].led_cdev.name)
-			led_classdev_unregister(&tca->leds[i].led_cdev);
-	}
-	return err;
 }

 static void tca6507_remove(struct i2c_client *client)
 {
-	int i;
 	struct tca6507_chip *tca = i2c_get_clientdata(client);
-	struct tca6507_led *tca_leds = tca->leds;

-	for (i = 0; i < NUM_LEDS; i++) {
-		if (tca_leds[i].led_cdev.name)
-			led_classdev_unregister(&tca_leds[i].led_cdev);
-	}
-	tca6507_remove_gpio(tca);
 	cancel_work_sync(&tca->work);
 }

--- a/drivers/leds/rgb/Kconfig
+++ b/drivers/leds/rgb/Kconfig
@ -4,7 +4,7 @@ if LEDS_CLASS_MULTICOLOR

 config LEDS_GROUP_MULTICOLOR
 	tristate "LEDs group multi-color support"
-	depends on OF || COMPILE_TEST
+	depends on OF
 	help
 	  This option enables support for monochrome LEDs that are grouped
 	  into multicolor LEDs which is useful in the case where LEDs of
--- a/drivers/leds/rgb/leds-qcom-lpg.c
+++ b/drivers/leds/rgb/leds-qcom-lpg.c
@ -552,9 +552,9 @@ static int lpg_parse_dtest(struct lpg *lpg)
 		ret = count;
 		goto err_malformed;
 	} else if (count != lpg->data->num_channels * 2) {
-		dev_err(lpg->dev, "qcom,dtest needs to be %d items\n",
-			lpg->data->num_channels * 2);
-		return -EINVAL;
+		return dev_err_probe(lpg->dev, -EINVAL,
+				     "qcom,dtest needs to be %d items\n",
+				     lpg->data->num_channels * 2);
 	}

 	for (i = 0; i < lpg->data->num_channels; i++) {
@ -574,8 +574,7 @@ static int lpg_parse_dtest(struct lpg *lpg)
 	return 0;

 err_malformed:
-	dev_err(lpg->dev, "malformed qcom,dtest\n");
-	return ret;
+	return dev_err_probe(lpg->dev, ret, "malformed qcom,dtest\n");
 }

 static void lpg_apply_dtest(struct lpg_channel *chan)
@ -977,9 +976,14 @@ static int lpg_pattern_mc_clear(struct led_classdev *cdev)
 	return lpg_pattern_clear(led);
 }

+static inline struct lpg *lpg_pwm_from_chip(struct pwm_chip *chip)
+{
+	return container_of(chip, struct lpg, pwm);
+}
+
 static int lpg_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
 {
-	struct lpg *lpg = container_of(chip, struct lpg, pwm);
+	struct lpg *lpg = lpg_pwm_from_chip(chip);
 	struct lpg_channel *chan = &lpg->channels[pwm->hwpwm];

 	return chan->in_use ? -EBUSY : 0;
@ -995,7 +999,7 @@ static int lpg_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
 static int lpg_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 			 const struct pwm_state *state)
 {
-	struct lpg *lpg = container_of(chip, struct lpg, pwm);
+	struct lpg *lpg = lpg_pwm_from_chip(chip);
 	struct lpg_channel *chan = &lpg->channels[pwm->hwpwm];
 	int ret = 0;

@ -1026,7 +1030,7 @@ out_unlock:
 static int lpg_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
 			     struct pwm_state *state)
 {
-	struct lpg *lpg = container_of(chip, struct lpg, pwm);
+	struct lpg *lpg = lpg_pwm_from_chip(chip);
 	struct lpg_channel *chan = &lpg->channels[pwm->hwpwm];
 	unsigned int resolution;
 	unsigned int pre_div;
@ -1095,9 +1099,9 @@ static int lpg_add_pwm(struct lpg *lpg)
 	lpg->pwm.npwm = lpg->num_channels;
 	lpg->pwm.ops = &lpg_pwm_ops;

-	ret = pwmchip_add(&lpg->pwm);
+	ret = devm_pwmchip_add(lpg->dev, &lpg->pwm);
 	if (ret)
-		dev_err(lpg->dev, "failed to add PWM chip: ret %d\n", ret);
+		dev_err_probe(lpg->dev, ret, "failed to add PWM chip\n");

 	return ret;
 }
@ -1111,19 +1115,16 @@ static int lpg_parse_channel(struct lpg *lpg, struct device_node *np,
 	int ret;

 	ret = of_property_read_u32(np, "reg", &reg);
-	if (ret || !reg || reg > lpg->num_channels) {
-		dev_err(lpg->dev, "invalid \"reg\" of %pOFn\n", np);
-		return -EINVAL;
-	}
+	if (ret || !reg || reg > lpg->num_channels)
+		return dev_err_probe(lpg->dev, -EINVAL, "invalid \"reg\" of %pOFn\n", np);

 	chan = &lpg->channels[reg - 1];
 	chan->in_use = true;

 	ret = of_property_read_u32(np, "color", &color);
-	if (ret < 0 && ret != -EINVAL) {
-		dev_err(lpg->dev, "failed to parse \"color\" of %pOF\n", np);
-		return ret;
-	}
+	if (ret < 0 && ret != -EINVAL)
+		return dev_err_probe(lpg->dev, ret,
+				     "failed to parse \"color\" of %pOF\n", np);

 	chan->color = color;

@ -1146,10 +1147,9 @@ static int lpg_add_led(struct lpg *lpg, struct device_node *np)
 	int i;

 	ret = of_property_read_u32(np, "color", &color);
-	if (ret < 0 && ret != -EINVAL) {
-		dev_err(lpg->dev, "failed to parse \"color\" of %pOF\n", np);
-		return ret;
-	}
+	if (ret < 0 && ret != -EINVAL)
+		return dev_err_probe(lpg->dev, ret,
+			      "failed to parse \"color\" of %pOF\n", np);

 	if (color == LED_COLOR_ID_RGB)
 		num_channels = of_get_available_child_count(np);
@ -1226,7 +1226,7 @@ static int lpg_add_led(struct lpg *lpg, struct device_node *np)
 	else
 		ret = devm_led_classdev_register_ext(lpg->dev, &led->cdev, &init_data);
 	if (ret)
-		dev_err(lpg->dev, "unable to register %s\n", cdev->name);
+		dev_err_probe(lpg->dev, ret, "unable to register %s\n", cdev->name);

 	return ret;
 }
@ -1272,10 +1272,9 @@ static int lpg_init_triled(struct lpg *lpg)

 	if (lpg->triled_has_src_sel) {
 		ret = of_property_read_u32(np, "qcom,power-source", &lpg->triled_src);
-		if (ret || lpg->triled_src == 2 || lpg->triled_src > 3) {
-			dev_err(lpg->dev, "invalid power source\n");
-			return -EINVAL;
-		}
+		if (ret || lpg->triled_src == 2 || lpg->triled_src > 3)
+			return dev_err_probe(lpg->dev, -EINVAL,
+					     "invalid power source\n");
 	}

 	/* Disable automatic trickle charge LED */
@ -1324,8 +1323,6 @@ static int lpg_probe(struct platform_device *pdev)
 	if (!lpg->data)
 		return -EINVAL;

-	platform_set_drvdata(pdev, lpg);
-
 	lpg->dev = &pdev->dev;
 	mutex_init(&lpg->lock);

@ -1363,13 +1360,6 @@ static int lpg_probe(struct platform_device *pdev)
 	return lpg_add_pwm(lpg);
 }

-static void lpg_remove(struct platform_device *pdev)
-{
-	struct lpg *lpg = platform_get_drvdata(pdev);
-
-	pwmchip_remove(&lpg->pwm);
-}
-
 static const struct lpg_data pm8916_pwm_data = {
 	.num_channels = 1,
 	.channels = (const struct lpg_channel_data[]) {
@ -1529,7 +1519,6 @@ MODULE_DEVICE_TABLE(of, lpg_of_table);

 static struct platform_driver lpg_driver = {
 	.probe = lpg_probe,
-	.remove_new = lpg_remove,
 	.driver = {
 		.name = "qcom-spmi-lpg",
 		.of_match_table = lpg_of_table,
--- a/drivers/leds/trigger/ledtrig-gpio.c
+++ b/drivers/leds/trigger/ledtrig-gpio.c
@ -41,33 +41,30 @@ static irqreturn_t gpio_trig_irq(int irq, void *_led)
 	return IRQ_HANDLED;
 }

-static ssize_t gpio_trig_brightness_show(struct device *dev,
+static ssize_t desired_brightness_show(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {
 	struct gpio_trig_data *gpio_data = led_trigger_get_drvdata(dev);

-	return sprintf(buf, "%u\n", gpio_data->desired_brightness);
+	return sysfs_emit(buf, "%u\n", gpio_data->desired_brightness);
 }

-static ssize_t gpio_trig_brightness_store(struct device *dev,
+static ssize_t desired_brightness_store(struct device *dev,
 		struct device_attribute *attr, const char *buf, size_t n)
 {
 	struct gpio_trig_data *gpio_data = led_trigger_get_drvdata(dev);
-	unsigned desired_brightness;
+	u8 desired_brightness;
 	int ret;

-	ret = sscanf(buf, "%u", &desired_brightness);
-	if (ret < 1 || desired_brightness > 255) {
-		dev_err(dev, "invalid value\n");
-		return -EINVAL;
-	}
+	ret = kstrtou8(buf, 10, &desired_brightness);
+	if (ret)
+		return ret;

 	gpio_data->desired_brightness = desired_brightness;

 	return n;
 }
-static DEVICE_ATTR(desired_brightness, 0644, gpio_trig_brightness_show,
-		gpio_trig_brightness_store);
+static DEVICE_ATTR_RW(desired_brightness);

 static struct attribute *gpio_trig_attrs[] = {
 	&dev_attr_desired_brightness.attr,
@ -89,10 +86,7 @@ static int gpio_trig_activate(struct led_classdev *led)
 	 * The generic property "trigger-sources" is followed,
 	 * and we hope that this is a GPIO.
 	 */
-	gpio_data->gpiod = fwnode_gpiod_get_index(dev->fwnode,
-						  "trigger-sources",
-						  0, GPIOD_IN,
-						  "led-trigger");
+	gpio_data->gpiod = gpiod_get_optional(dev, "trigger-sources", GPIOD_IN);
 	if (IS_ERR(gpio_data->gpiod)) {
 		ret = PTR_ERR(gpio_data->gpiod);
 		kfree(gpio_data);
@ -104,6 +98,8 @@ static int gpio_trig_activate(struct led_classdev *led)
 		return -EINVAL;
 	}

+	gpiod_set_consumer_name(gpio_data->gpiod, "led-trigger");
+
 	gpio_data->led = led;
 	led_set_trigger_data(led, gpio_data);

--- a/drivers/leds/trigger/ledtrig-netdev.c
+++ b/drivers/leds/trigger/ledtrig-netdev.c
@ -38,6 +38,16 @@
 * tx -  LED blinks on transmitted data
 * rx -  LED blinks on receive data
 *
+ * Note: If the user selects a mode that is not supported by hw, default
+ * behavior is to fall back to software control of the LED. However not every
+ * hw supports software control. LED callbacks brightness_set() and
+ * brightness_set_blocking() are NULL in this case. hw_control_is_supported()
+ * should use available means supported by hw to inform the user that selected
+ * mode isn't supported by hw. This could be switching off the LED or any
+ * hw blink mode. If software control fallback isn't possible, we return
+ * -EOPNOTSUPP to the user, but still store the selected mode. This is needed
+ * in case an intermediate unsupported mode is necessary to switch from one
+ * supported mode to another.
 */

 struct led_netdev_data {
@ -99,6 +109,18 @@ static void set_baseline_state(struct led_netdev_data *trigger_data)
 		    trigger_data->link_speed == SPEED_1000)
 			blink_on = true;

+		if (test_bit(TRIGGER_NETDEV_LINK_2500, &trigger_data->mode) &&
+		    trigger_data->link_speed == SPEED_2500)
+			blink_on = true;
+
+		if (test_bit(TRIGGER_NETDEV_LINK_5000, &trigger_data->mode) &&
+		    trigger_data->link_speed == SPEED_5000)
+			blink_on = true;
+
+		if (test_bit(TRIGGER_NETDEV_LINK_10000, &trigger_data->mode) &&
+		    trigger_data->link_speed == SPEED_10000)
+			blink_on = true;
+
 		if (test_bit(TRIGGER_NETDEV_HALF_DUPLEX, &trigger_data->mode) &&
 		    trigger_data->duplex == DUPLEX_HALF)
 			blink_on = true;
@ -289,6 +311,9 @@ static ssize_t netdev_led_attr_show(struct device *dev, char *buf,
 	case TRIGGER_NETDEV_LINK_10:
 	case TRIGGER_NETDEV_LINK_100:
 	case TRIGGER_NETDEV_LINK_1000:
+	case TRIGGER_NETDEV_LINK_2500:
+	case TRIGGER_NETDEV_LINK_5000:
+	case TRIGGER_NETDEV_LINK_10000:
 	case TRIGGER_NETDEV_HALF_DUPLEX:
 	case TRIGGER_NETDEV_FULL_DUPLEX:
 	case TRIGGER_NETDEV_TX:
@ -306,6 +331,7 @@ static ssize_t netdev_led_attr_store(struct device *dev, const char *buf,
 				     size_t size, enum led_trigger_netdev_modes attr)
 {
 	struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev);
+	struct led_classdev *led_cdev = trigger_data->led_cdev;
 	unsigned long state, mode = trigger_data->mode;
 	int ret;
 	int bit;
@ -319,6 +345,9 @@ static ssize_t netdev_led_attr_store(struct device *dev, const char *buf,
 	case TRIGGER_NETDEV_LINK_10:
 	case TRIGGER_NETDEV_LINK_100:
 	case TRIGGER_NETDEV_LINK_1000:
+	case TRIGGER_NETDEV_LINK_2500:
+	case TRIGGER_NETDEV_LINK_5000:
+	case TRIGGER_NETDEV_LINK_10000:
 	case TRIGGER_NETDEV_HALF_DUPLEX:
 	case TRIGGER_NETDEV_FULL_DUPLEX:
 	case TRIGGER_NETDEV_TX:
@ -337,7 +366,10 @@ static ssize_t netdev_led_attr_store(struct device *dev, const char *buf,
 	if (test_bit(TRIGGER_NETDEV_LINK, &mode) &&
 	    (test_bit(TRIGGER_NETDEV_LINK_10, &mode) ||
 	     test_bit(TRIGGER_NETDEV_LINK_100, &mode) ||
-	     test_bit(TRIGGER_NETDEV_LINK_1000, &mode)))
+	     test_bit(TRIGGER_NETDEV_LINK_1000, &mode) ||
+	     test_bit(TRIGGER_NETDEV_LINK_2500, &mode) ||
+	     test_bit(TRIGGER_NETDEV_LINK_5000, &mode) ||
+	     test_bit(TRIGGER_NETDEV_LINK_10000, &mode)))
 		return -EINVAL;

 	cancel_delayed_work_sync(&trigger_data->work);
@ -345,6 +377,10 @@ static ssize_t netdev_led_attr_store(struct device *dev, const char *buf,
 	trigger_data->mode = mode;
 	trigger_data->hw_control = can_hw_control(trigger_data);

+	if (!led_cdev->brightness_set && !led_cdev->brightness_set_blocking &&
+	    !trigger_data->hw_control)
+		return -EOPNOTSUPP;
+
 	set_baseline_state(trigger_data);

 	return size;
@ -367,6 +403,9 @@ DEFINE_NETDEV_TRIGGER(link, TRIGGER_NETDEV_LINK);
 DEFINE_NETDEV_TRIGGER(link_10, TRIGGER_NETDEV_LINK_10);
 DEFINE_NETDEV_TRIGGER(link_100, TRIGGER_NETDEV_LINK_100);
 DEFINE_NETDEV_TRIGGER(link_1000, TRIGGER_NETDEV_LINK_1000);
+DEFINE_NETDEV_TRIGGER(link_2500, TRIGGER_NETDEV_LINK_2500);
+DEFINE_NETDEV_TRIGGER(link_5000, TRIGGER_NETDEV_LINK_5000);
+DEFINE_NETDEV_TRIGGER(link_10000, TRIGGER_NETDEV_LINK_10000);
 DEFINE_NETDEV_TRIGGER(half_duplex, TRIGGER_NETDEV_HALF_DUPLEX);
 DEFINE_NETDEV_TRIGGER(full_duplex, TRIGGER_NETDEV_FULL_DUPLEX);
 DEFINE_NETDEV_TRIGGER(tx, TRIGGER_NETDEV_TX);
@ -425,6 +464,9 @@ static struct attribute *netdev_trig_attrs[] = {
 	&dev_attr_link_10.attr,
 	&dev_attr_link_100.attr,
 	&dev_attr_link_1000.attr,
+	&dev_attr_link_2500.attr,
+	&dev_attr_link_5000.attr,
+	&dev_attr_link_10000.attr,
 	&dev_attr_full_duplex.attr,
 	&dev_attr_half_duplex.attr,
 	&dev_attr_rx.attr,
@ -522,6 +564,9 @@ static void netdev_trig_work(struct work_struct *work)
 			 test_bit(TRIGGER_NETDEV_LINK_10, &trigger_data->mode) ||
 			 test_bit(TRIGGER_NETDEV_LINK_100, &trigger_data->mode) ||
 			 test_bit(TRIGGER_NETDEV_LINK_1000, &trigger_data->mode) ||
+			 test_bit(TRIGGER_NETDEV_LINK_2500, &trigger_data->mode) ||
+			 test_bit(TRIGGER_NETDEV_LINK_5000, &trigger_data->mode) ||
+			 test_bit(TRIGGER_NETDEV_LINK_10000, &trigger_data->mode) ||
 			 test_bit(TRIGGER_NETDEV_HALF_DUPLEX, &trigger_data->mode) ||
 			 test_bit(TRIGGER_NETDEV_FULL_DUPLEX, &trigger_data->mode);
 		interval = jiffies_to_msecs(
--- a/drivers/leds/trigger/ledtrig-panic.c
+++ b/drivers/leds/trigger/ledtrig-panic.c
@ -64,10 +64,13 @@ static long led_panic_blink(int state)

 static int __init ledtrig_panic_init(void)
 {
+	led_trigger_register_simple("panic", &trigger);
+	if (!trigger)
+		return -ENOMEM;
+
 	atomic_notifier_chain_register(&panic_notifier_list,
 				       &led_trigger_panic_nb);

-	led_trigger_register_simple("panic", &trigger);
 	panic_blink = led_panic_blink;
 	return 0;
 }
--- a/drivers/leds/trigger/ledtrig-tty.c
+++ b/drivers/leds/trigger/ledtrig-tty.c
@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0

+#include <linux/completion.h>
 #include <linux/delay.h>
 #include <linux/leds.h>
 #include <linux/module.h>
@ -12,15 +13,45 @@
 struct ledtrig_tty_data {
 	struct led_classdev *led_cdev;
 	struct delayed_work dwork;
-	struct mutex mutex;
+	struct completion sysfs;
 	const char *ttyname;
 	struct tty_struct *tty;
 	int rx, tx;
+	bool mode_rx;
+	bool mode_tx;
+	bool mode_cts;
+	bool mode_dsr;
+	bool mode_dcd;
+	bool mode_rng;
 };

-static void ledtrig_tty_restart(struct ledtrig_tty_data *trigger_data)
+/* Indicates which state the LED should now display */
+enum led_trigger_tty_state {
+	TTY_LED_BLINK,
+	TTY_LED_ENABLE,
+	TTY_LED_DISABLE,
+};
+
+enum led_trigger_tty_modes {
+	TRIGGER_TTY_RX = 0,
+	TRIGGER_TTY_TX,
+	TRIGGER_TTY_CTS,
+	TRIGGER_TTY_DSR,
+	TRIGGER_TTY_DCD,
+	TRIGGER_TTY_RNG,
+};
+
+static int ledtrig_tty_wait_for_completion(struct device *dev)
 {
-	schedule_delayed_work(&trigger_data->dwork, 0);
+	struct ledtrig_tty_data *trigger_data = led_trigger_get_drvdata(dev);
+	int ret;
+
+	ret = wait_for_completion_timeout(&trigger_data->sysfs,
+					  msecs_to_jiffies(LEDTRIG_TTY_INTERVAL * 20));
+	if (ret == 0)
+		return -ETIMEDOUT;
+
+	return ret;
 }

 static ssize_t ttyname_show(struct device *dev,
@ -28,14 +59,16 @@ static ssize_t ttyname_show(struct device *dev,
 {
 	struct ledtrig_tty_data *trigger_data = led_trigger_get_drvdata(dev);
 	ssize_t len = 0;
+	int completion;

-	mutex_lock(&trigger_data->mutex);
+	reinit_completion(&trigger_data->sysfs);
+	completion = ledtrig_tty_wait_for_completion(dev);
+	if (completion < 0)
+		return completion;

 	if (trigger_data->ttyname)
 		len = sprintf(buf, "%s\n", trigger_data->ttyname);

-	mutex_unlock(&trigger_data->mutex);
-
 	return len;
 }

@ -46,7 +79,7 @@ static ssize_t ttyname_store(struct device *dev,
 	struct ledtrig_tty_data *trigger_data = led_trigger_get_drvdata(dev);
 	char *ttyname;
 	ssize_t ret = size;
-	bool running;
+	int completion;

 	if (size > 0 && buf[size - 1] == '\n')
 		size -= 1;
@ -59,9 +92,10 @@ static ssize_t ttyname_store(struct device *dev,
 		ttyname = NULL;
 	}

-	mutex_lock(&trigger_data->mutex);
-
-	running = trigger_data->ttyname != NULL;
+	reinit_completion(&trigger_data->sysfs);
+	completion = ledtrig_tty_wait_for_completion(dev);
+	if (completion < 0)
+		return completion;

 	kfree(trigger_data->ttyname);
 	tty_kref_put(trigger_data->tty);
@ -69,29 +103,107 @@ static ssize_t ttyname_store(struct device *dev,

 	trigger_data->ttyname = ttyname;

-	mutex_unlock(&trigger_data->mutex);
-
-	if (ttyname && !running)
-		ledtrig_tty_restart(trigger_data);
-
 	return ret;
 }
 static DEVICE_ATTR_RW(ttyname);

+static ssize_t ledtrig_tty_attr_show(struct device *dev, char *buf,
+				     enum led_trigger_tty_modes attr)
+{
+	struct ledtrig_tty_data *trigger_data = led_trigger_get_drvdata(dev);
+	bool state;
+
+	switch (attr) {
+	case TRIGGER_TTY_RX:
+		state = trigger_data->mode_rx;
+		break;
+	case TRIGGER_TTY_TX:
+		state = trigger_data->mode_tx;
+		break;
+	case TRIGGER_TTY_CTS:
+		state = trigger_data->mode_cts;
+		break;
+	case TRIGGER_TTY_DSR:
+		state = trigger_data->mode_dsr;
+		break;
+	case TRIGGER_TTY_DCD:
+		state = trigger_data->mode_dcd;
+		break;
+	case TRIGGER_TTY_RNG:
+		state = trigger_data->mode_rng;
+		break;
+	}
+
+	return sysfs_emit(buf, "%u\n", state);
+}
+
+static ssize_t ledtrig_tty_attr_store(struct device *dev, const char *buf,
+				      size_t size, enum led_trigger_tty_modes attr)
+{
+	struct ledtrig_tty_data *trigger_data = led_trigger_get_drvdata(dev);
+	bool state;
+	int ret;
+
+	ret = kstrtobool(buf, &state);
+	if (ret)
+		return ret;
+
+	switch (attr) {
+	case TRIGGER_TTY_RX:
+		trigger_data->mode_rx = state;
+		break;
+	case TRIGGER_TTY_TX:
+		trigger_data->mode_tx = state;
+		break;
+	case TRIGGER_TTY_CTS:
+		trigger_data->mode_cts = state;
+		break;
+	case TRIGGER_TTY_DSR:
+		trigger_data->mode_dsr = state;
+		break;
+	case TRIGGER_TTY_DCD:
+		trigger_data->mode_dcd = state;
+		break;
+	case TRIGGER_TTY_RNG:
+		trigger_data->mode_rng = state;
+		break;
+	}
+
+	return size;
+}
+
+#define DEFINE_TTY_TRIGGER(trigger_name, trigger) \
+	static ssize_t trigger_name##_show(struct device *dev, \
+		struct device_attribute *attr, char *buf) \
+	{ \
+		return ledtrig_tty_attr_show(dev, buf, trigger); \
+	} \
+	static ssize_t trigger_name##_store(struct device *dev, \
+		struct device_attribute *attr, const char *buf, size_t size) \
+	{ \
+		return ledtrig_tty_attr_store(dev, buf, size, trigger); \
+	} \
+	static DEVICE_ATTR_RW(trigger_name)
+
+DEFINE_TTY_TRIGGER(rx, TRIGGER_TTY_RX);
+DEFINE_TTY_TRIGGER(tx, TRIGGER_TTY_TX);
+DEFINE_TTY_TRIGGER(cts, TRIGGER_TTY_CTS);
+DEFINE_TTY_TRIGGER(dsr, TRIGGER_TTY_DSR);
+DEFINE_TTY_TRIGGER(dcd, TRIGGER_TTY_DCD);
+DEFINE_TTY_TRIGGER(rng, TRIGGER_TTY_RNG);
+
 static void ledtrig_tty_work(struct work_struct *work)
 {
 	struct ledtrig_tty_data *trigger_data =
 		container_of(work, struct ledtrig_tty_data, dwork.work);
-	struct serial_icounter_struct icount;
+	enum led_trigger_tty_state state = TTY_LED_DISABLE;
+	unsigned long interval = LEDTRIG_TTY_INTERVAL;
+	bool invert = false;
+	int status;
 	int ret;

-	mutex_lock(&trigger_data->mutex);
-
-	if (!trigger_data->ttyname) {
-		/* exit without rescheduling */
-		mutex_unlock(&trigger_data->mutex);
-		return;
-	}
+	if (!trigger_data->ttyname)
+		goto out;

 	/* try to get the tty corresponding to $ttyname */
 	if (!trigger_data->tty) {
@ -115,32 +227,83 @@ static void ledtrig_tty_work(struct work_struct *work)
 		trigger_data->tty = tty;
 	}

-	ret = tty_get_icount(trigger_data->tty, &icount);
-	if (ret) {
-		dev_info(trigger_data->tty->dev, "Failed to get icount, stopped polling\n");
-		mutex_unlock(&trigger_data->mutex);
-		return;
+	status = tty_get_tiocm(trigger_data->tty);
+	if (status > 0) {
+		if (trigger_data->mode_cts) {
+			if (status & TIOCM_CTS)
+				state = TTY_LED_ENABLE;
+		}
+
+		if (trigger_data->mode_dsr) {
+			if (status & TIOCM_DSR)
+				state = TTY_LED_ENABLE;
+		}
+
+		if (trigger_data->mode_dcd) {
+			if (status & TIOCM_CAR)
+				state = TTY_LED_ENABLE;
+		}
+
+		if (trigger_data->mode_rng) {
+			if (status & TIOCM_RNG)
+				state = TTY_LED_ENABLE;
+		}
 	}

-	if (icount.rx != trigger_data->rx ||
-	    icount.tx != trigger_data->tx) {
-		unsigned long interval = LEDTRIG_TTY_INTERVAL;
+	/*
+	 * The evaluation of rx/tx must be done after the evaluation
+	 * of TIOCM_*, because rx/tx has priority.
+	 */
+	if (trigger_data->mode_rx || trigger_data->mode_tx) {
+		struct serial_icounter_struct icount;

-		led_blink_set_oneshot(trigger_data->led_cdev, &interval,
-				      &interval, 0);
+		ret = tty_get_icount(trigger_data->tty, &icount);
+		if (ret)
+			goto out;

-		trigger_data->rx = icount.rx;
-		trigger_data->tx = icount.tx;
+		if (trigger_data->mode_tx && (icount.tx != trigger_data->tx)) {
+			trigger_data->tx = icount.tx;
+			invert = state == TTY_LED_ENABLE;
+			state = TTY_LED_BLINK;
+		}
+
+		if (trigger_data->mode_rx && (icount.rx != trigger_data->rx)) {
+			trigger_data->rx = icount.rx;
+			invert = state == TTY_LED_ENABLE;
+			state = TTY_LED_BLINK;
+		}
 	}

 out:
-	mutex_unlock(&trigger_data->mutex);
+	switch (state) {
+	case TTY_LED_BLINK:
+		led_blink_set_oneshot(trigger_data->led_cdev, &interval,
+				&interval, invert);
+		break;
+	case TTY_LED_ENABLE:
+		led_set_brightness(trigger_data->led_cdev,
+				trigger_data->led_cdev->blink_brightness);
+		break;
+	case TTY_LED_DISABLE:
+		fallthrough;
+	default:
+		led_set_brightness(trigger_data->led_cdev, LED_OFF);
+		break;
+	}
+
+	complete_all(&trigger_data->sysfs);
 	schedule_delayed_work(&trigger_data->dwork,
 			      msecs_to_jiffies(LEDTRIG_TTY_INTERVAL * 2));
 }

 static struct attribute *ledtrig_tty_attrs[] = {
 	&dev_attr_ttyname.attr,
+	&dev_attr_rx.attr,
+	&dev_attr_tx.attr,
+	&dev_attr_cts.attr,
+	&dev_attr_dsr.attr,
+	&dev_attr_dcd.attr,
+	&dev_attr_rng.attr,
 	NULL
 };
 ATTRIBUTE_GROUPS(ledtrig_tty);
@ -153,11 +316,17 @@ static int ledtrig_tty_activate(struct led_classdev *led_cdev)
 	if (!trigger_data)
 		return -ENOMEM;

+	/* Enable default rx/tx mode */
+	trigger_data->mode_rx = true;
+	trigger_data->mode_tx = true;
+
 	led_set_trigger_data(led_cdev, trigger_data);

 	INIT_DELAYED_WORK(&trigger_data->dwork, ledtrig_tty_work);
 	trigger_data->led_cdev = led_cdev;
-	mutex_init(&trigger_data->mutex);
+	init_completion(&trigger_data->sysfs);
+
+	schedule_delayed_work(&trigger_data->dwork, 0);

 	return 0;
 }
@ -168,6 +337,10 @@ static void ledtrig_tty_deactivate(struct led_classdev *led_cdev)

 	cancel_delayed_work_sync(&trigger_data->dwork);

+	kfree(trigger_data->ttyname);
+	tty_kref_put(trigger_data->tty);
+	trigger_data->tty = NULL;
+
 	kfree(trigger_data);
 }

--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@ -2498,6 +2498,24 @@ static int send_break(struct tty_struct *tty, unsigned int duration)
 	return retval;
 }

+/**
+ * tty_get_tiocm - get tiocm status register
+ * @tty: tty device
+ *
+ * Obtain the modem status bits from the tty driver if the feature
+ * is supported.
+ */
+int tty_get_tiocm(struct tty_struct *tty)
+{
+	int retval = -ENOTTY;
+
+	if (tty->ops->tiocmget)
+		retval = tty->ops->tiocmget(tty);
+
+	return retval;
+}
+EXPORT_SYMBOL_GPL(tty_get_tiocm);
+
 /**
 * tty_tiocmget - get modem status
 * @tty: tty device
@ -2510,14 +2528,12 @@ static int send_break(struct tty_struct *tty, unsigned int duration)
 */
 static int tty_tiocmget(struct tty_struct *tty, int __user *p)
 {
-	int retval = -ENOTTY;
+	int retval;

-	if (tty->ops->tiocmget) {
-		retval = tty->ops->tiocmget(tty);
+	retval = tty_get_tiocm(tty);
+	if (retval >= 0)
+		retval = put_user(retval, p);

-		if (retval >= 0)
-			retval = put_user(retval, p);
-	}
 	return retval;
 }

--- a/include/linux/leds.h
+++ b/include/linux/leds.h
@ -527,23 +527,6 @@ static inline void *led_get_trigger_data(struct led_classdev *led_cdev)
 	return led_cdev->trigger_data;
 }

-/**
- * led_trigger_rename_static - rename a trigger
- * @name: the new trigger name
- * @trig: the LED trigger to rename
- *
- * Change a LED trigger name by copying the string passed in
- * name into current trigger name, which MUST be large
- * enough for the new string.
- *
- * Note that name must NOT point to the same string used
- * during LED registration, as that could lead to races.
- *
- * This is meant to be used on triggers with statically
- * allocated name.
- */
-void led_trigger_rename_static(const char *name, struct led_trigger *trig);
-
 #define module_led_trigger(__led_trigger) \
 	module_driver(__led_trigger, led_trigger_register, \
 		      led_trigger_unregister)
@ -588,6 +571,9 @@ enum led_trigger_netdev_modes {
 	TRIGGER_NETDEV_LINK_10,
 	TRIGGER_NETDEV_LINK_100,
 	TRIGGER_NETDEV_LINK_1000,
+	TRIGGER_NETDEV_LINK_2500,
+	TRIGGER_NETDEV_LINK_5000,
+	TRIGGER_NETDEV_LINK_10000,
 	TRIGGER_NETDEV_HALF_DUPLEX,
 	TRIGGER_NETDEV_FULL_DUPLEX,
 	TRIGGER_NETDEV_TX,
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@ -419,6 +419,7 @@ bool tty_unthrottle_safe(struct tty_struct *tty);
 int tty_do_resize(struct tty_struct *tty, struct winsize *ws);
 int tty_get_icount(struct tty_struct *tty,
 		struct serial_icounter_struct *icount);
+int tty_get_tiocm(struct tty_struct *tty);
 int is_current_pgrp_orphaned(void);
 void tty_hangup(struct tty_struct *tty);
 void tty_vhangup(struct tty_struct *tty);