iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Updates for timers, timekeeping and drivers:

Browse Source 
- Core:
 
    - The timer_shutdown[_sync]() infrastructure:
 
      Tearing down timers can be tedious when there are circular
      dependencies to other things which need to be torn down. A prime
      example is timer and workqueue where the timer schedules work and the
      work arms the timer.
 
      What needs to prevented is that pending work which is drained via
      destroy_workqueue() does not rearm the previously shutdown
      timer. Nothing in that shutdown sequence relies on the timer being
      functional.
 
      The conclusion was that the semantics of timer_shutdown_sync() should
      be:
 
 	- timer is not enqueued
     	- timer callback is not running
     	- timer cannot be rearmed
 
      Preventing the rearming of shutdown timers is done by discarding rearm
      attempts silently. A warning for the case that a rearm attempt of a
      shutdown timer is detected would not be really helpful because it's
      entirely unclear how it should be acted upon. The only way to address
      such a case is to add 'if (in_shutdown)' conditionals all over the
      place. This is error prone and in most cases of teardown not required
      all.
 
    - The real fix for the bluetooth HCI teardown based on
      timer_shutdown_sync().
 
      A larger scale conversion to timer_shutdown_sync() is work in
      progress.
 
    - Consolidation of VDSO time namespace helper functions
 
    - Small fixes for timer and timerqueue
 
  - Drivers:
 
    - Prevent integer overflow on the XGene-1 TVAL register which causes
      an never ending interrupt storm.
 
    - The usual set of new device tree bindings
 
    - Small fixes and improvements all over the place
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmOUuC0THHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYodpZD/9kCDi009n65QFF1J4kE5aZuABbRMtO
 7sy66fJpDyB/MtcbPPH29uzQUEs1VMTQVB+ZM+7e1YGoxSWuSTzeoFH+yK1w4tEZ
 VPbOcvUEjG0esKUehwYFeOjSnIjy6M1Y41aOUaDnq00/azhfTrzLxQA1BbbFbkpw
 S7u2hllbyRJ8KdqQyV9cVpXmze6fcpdtNhdQeoA7qQCsSPnJ24MSpZ/PG9bAovq8
 75IRROT7CQRd6AMKAVpA9Ov8ak9nbY3EgQmoKcp5ZXfXz8kD3nHky9Lste7djgYB
 U085Vwcelt39V5iXevDFfzrBYRUqrMKOXIf2xnnoDNeF5Jlj5gChSNVZwTLO38wu
 RFEVCjCjuC41GQJWSck9LRSYdriW/htVbEE8JLc6uzUJGSyjshgJRn/PK4HjpiLY
 AvH2rd4rAap/rjDKvfWvBqClcfL7pyBvavgJeyJ8oXyQjHrHQwapPcsMFBm0Cky5
 soF0Lr3hIlQ9u+hwUuFdNZkY9mOg09g9ImEjW1AZTKY0DfJMc5JAGjjSCfuopVUN
 Uf/qqcUeQPSEaC+C9xiFs0T3svYFxBqpgPv4B6t8zAnozon9fyZs+lv5KdRg4X77
 qX395qc6PaOSQlA7gcxVw3vjCPd0+hljXX84BORP7z+uzcsomvIH1MxJepIHmgaJ
 JrYbSZ5qzY5TTA==
 =JlDe
 -----END PGP SIGNATURE-----

Merge tag 'timers-core-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull timer updates from Thomas Gleixner:
 "Updates for timers, timekeeping and drivers:

  Core:

   - The timer_shutdown[_sync]() infrastructure:

     Tearing down timers can be tedious when there are circular
     dependencies to other things which need to be torn down. A prime
     example is timer and workqueue where the timer schedules work and
     the work arms the timer.

     What needs to prevented is that pending work which is drained via
     destroy_workqueue() does not rearm the previously shutdown timer.
     Nothing in that shutdown sequence relies on the timer being
     functional.

     The conclusion was that the semantics of timer_shutdown_sync()
     should be:
	- timer is not enqueued
    	- timer callback is not running
    	- timer cannot be rearmed

     Preventing the rearming of shutdown timers is done by discarding
     rearm attempts silently.

     A warning for the case that a rearm attempt of a shutdown timer is
     detected would not be really helpful because it's entirely unclear
     how it should be acted upon. The only way to address such a case is
     to add 'if (in_shutdown)' conditionals all over the place. This is
     error prone and in most cases of teardown not required all.

   - The real fix for the bluetooth HCI teardown based on
     timer_shutdown_sync().

     A larger scale conversion to timer_shutdown_sync() is work in
     progress.

   - Consolidation of VDSO time namespace helper functions

   - Small fixes for timer and timerqueue

  Drivers:

   - Prevent integer overflow on the XGene-1 TVAL register which causes
     an never ending interrupt storm.

   - The usual set of new device tree bindings

   - Small fixes and improvements all over the place"

* tag 'timers-core-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
  dt-bindings: timer: renesas,cmt: Add r8a779g0 CMT support
  dt-bindings: timer: renesas,tmu: Add r8a779g0 support
  clocksource/drivers/arm_arch_timer: Use kstrtobool() instead of strtobool()
  clocksource/drivers/timer-ti-dm: Fix missing clk_disable_unprepare in dmtimer_systimer_init_clock()
  clocksource/drivers/timer-ti-dm: Clear settings on probe and free
  clocksource/drivers/timer-ti-dm: Make timer_get_irq static
  clocksource/drivers/timer-ti-dm: Fix warning for omap_timer_match
  clocksource/drivers/arm_arch_timer: Fix XGene-1 TVAL register math error
  clocksource/drivers/timer-npcm7xx: Enable timer 1 clock before use
  dt-bindings: timer: nuvoton,npcm7xx-timer: Allow specifying all clocks
  dt-bindings: timer: rockchip: Add rockchip,rk3128-timer
  clockevents: Repair kernel-doc for clockevent_delta2ns()
  clocksource/drivers/ingenic-ost: Define pm functions properly in platform_driver struct
  clocksource/drivers/sh_cmt: Access registers according to spec
  vdso/timens: Refactor copy-pasted find_timens_vvar_page() helper into one copy
  Bluetooth: hci_qca: Fix the teardown problem for real
  timers: Update the documentation to reflect on the new timer_shutdown() API
  timers: Provide timer_shutdown[_sync]()
  timers: Add shutdown mechanism to the internal functions
  timers: Split [try_to_]del_timer[_sync]() to prepare for shutdown mode
  ...
This commit is contained in:
Linus Torvalds 2022-12-12 12:52:02 -08:00
commit 0a1d4434db
35 changed files with 530 additions and 298 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Documentation/RCU/Design/Requirements/Requirements.rst
View File

@ -1858,7 +1858,7 @@ unloaded. After a given module has been unloaded, any attempt to call
one of its functions results in a segmentation fault. The module-unload
functions must therefore cancel any delayed calls to loadable-module
functions, for example, any outstanding mod_timer() must be dealt
with via del_timer_sync() or similar.
with via timer_shutdown_sync() or similar.
Unfortunately, there is no way to cancel an RCU callback; once you
invoke call_rcu(), the callback function is eventually going to be

2
Documentation/core-api/local_ops.rst
View File

@ -191,7 +191,7 @@ Here is a sample module which implements a basic per cpu counter using
static void __exit test_exit(void)
{
del_timer_sync(&test_timer);
timer_shutdown_sync(&test_timer);
}
module_init(test_init);

8
Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.yaml
View File

@ -25,7 +25,13 @@ properties:
- description: The timer interrupt of timer 0
clocks:
maxItems: 1
items:
- description: The reference clock for timer 0
- description: The reference clock for timer 1
- description: The reference clock for timer 2
- description: The reference clock for timer 3
- description: The reference clock for timer 4
minItems: 1
required:
- compatible

2
Documentation/devicetree/bindings/timer/renesas,cmt.yaml
View File

@ -102,12 +102,14 @@ properties:
- enum:
- renesas,r8a779a0-cmt0 # 32-bit CMT0 on R-Car V3U
- renesas,r8a779f0-cmt0 # 32-bit CMT0 on R-Car S4-8
- renesas,r8a779g0-cmt0 # 32-bit CMT0 on R-Car V4H
- const: renesas,rcar-gen4-cmt0 # 32-bit CMT0 on R-Car Gen4
- items:
- enum:
- renesas,r8a779a0-cmt1 # 48-bit CMT on R-Car V3U
- renesas,r8a779f0-cmt1 # 48-bit CMT on R-Car S4-8
- renesas,r8a779g0-cmt1 # 48-bit CMT on R-Car V4H
- const: renesas,rcar-gen4-cmt1 # 48-bit CMT on R-Car Gen4
reg:

1
Documentation/devicetree/bindings/timer/renesas,tmu.yaml
View File

@ -38,6 +38,7 @@ properties:
- renesas,tmu-r8a77995 # R-Car D3
- renesas,tmu-r8a779a0 # R-Car V3U
- renesas,tmu-r8a779f0 # R-Car S4-8
- renesas,tmu-r8a779g0 # R-Car V4H
- const: renesas,tmu
reg:

1
Documentation/devicetree/bindings/timer/rockchip,rk-timer.yaml
View File

@ -18,6 +18,7 @@ properties:
- enum:
- rockchip,rv1108-timer
- rockchip,rk3036-timer
- rockchip,rk3128-timer
- rockchip,rk3188-timer
- rockchip,rk3228-timer
- rockchip,rk3229-timer

17
Documentation/kernel-hacking/locking.rst
View File

@ -967,7 +967,7 @@ you might do the following::
while (list) {
struct foo *next = list->next;
del_timer(&list->timer);
timer_delete(&list->timer);
kfree(list);
list = next;
}
@ -981,7 +981,7 @@ the lock after we spin_unlock_bh(), and then try to free
the element (which has already been freed!).
This can be avoided by checking the result of
del_timer(): if it returns 1, the timer has been deleted.
timer_delete(): if it returns 1, the timer has been deleted.
If 0, it means (in this case) that it is currently running, so we can
do::
@ -990,7 +990,7 @@ do::
while (list) {
struct foo *next = list->next;
if (!del_timer(&list->timer)) {
if (!timer_delete(&list->timer)) {
/* Give timer a chance to delete this */
spin_unlock_bh(&list_lock);
goto retry;
@ -1005,9 +1005,12 @@ do::
Another common problem is deleting timers which restart themselves (by
calling add_timer() at the end of their timer function).
Because this is a fairly common case which is prone to races, you should
use del_timer_sync() (``include/linux/timer.h``) to
handle this case. It returns the number of times the timer had to be
deleted before we finally stopped it from adding itself back in.
use timer_delete_sync() (``include/linux/timer.h``) to handle this case.
Before freeing a timer, timer_shutdown() or timer_shutdown_sync() should be
called which will keep it from being rearmed. Any subsequent attempt to
rearm the timer will be silently ignored by the core code.
Locking Speed
=============
@ -1335,7 +1338,7 @@ lock.
- kfree()
- add_timer() and del_timer()
- add_timer() and timer_delete()
Mutex API reference
===================

2
Documentation/timers/hrtimers.rst
View File

@ -118,7 +118,7 @@ existing timer wheel code, as it is mature and well suited. Sharing code
was not really a win, due to the different data structures. Also, the
hrtimer functions now have clearer behavior and clearer names - such as
hrtimer_try_to_cancel() and hrtimer_cancel() [which are roughly
equivalent to del_timer() and del_timer_sync()] - so there's no direct
equivalent to timer_delete() and timer_delete_sync()] - so there's no direct
1:1 mapping between them on the algorithmic level, and thus no real
potential for code sharing either.

14
Documentation/translations/it_IT/kernel-hacking/locking.rst
View File

@ -990,7 +990,7 @@ potreste fare come segue::
while (list) {
struct foo *next = list->next;
del_timer(&list->timer);
timer_delete(&list->timer);
kfree(list);
list = next;
}
@ -1003,7 +1003,7 @@ e prenderà il *lock* solo dopo spin_unlock_bh(), e cercherà
di eliminare il suo oggetto (che però è già stato eliminato).
Questo può essere evitato controllando il valore di ritorno di
del_timer(): se ritorna 1, il temporizzatore è stato già
timer_delete(): se ritorna 1, il temporizzatore è stato già
rimosso. Se 0, significa (in questo caso) che il temporizzatore è in
esecuzione, quindi possiamo fare come segue::
@ -1012,7 +1012,7 @@ esecuzione, quindi possiamo fare come segue::
while (list) {
struct foo *next = list->next;
if (!del_timer(&list->timer)) {
if (!timer_delete(&list->timer)) {
/* Give timer a chance to delete this */
spin_unlock_bh(&list_lock);
goto retry;
@ -1026,10 +1026,8 @@ esecuzione, quindi possiamo fare come segue::
Un altro problema è l'eliminazione dei temporizzatori che si riavviano
da soli (chiamando add_timer() alla fine della loro esecuzione).
Dato che questo è un problema abbastanza comune con una propensione
alle corse critiche, dovreste usare del_timer_sync()
(``include/linux/timer.h``) per gestire questo caso. Questa ritorna il
numero di volte che il temporizzatore è stato interrotto prima che
fosse in grado di fermarlo senza che si riavviasse.
alle corse critiche, dovreste usare timer_delete_sync()
(``include/linux/timer.h``) per gestire questo caso.
Velocità della sincronizzazione
===============================
@ -1374,7 +1372,7 @@ contesto, o trattenendo un qualsiasi *lock*.
- kfree()
- add_timer() e del_timer()
- add_timer() e timer_delete()
Riferimento per l'API dei Mutex
===============================

2
Documentation/translations/zh_CN/core-api/local_ops.rst
View File

@ -185,7 +185,7 @@ UP之间没有不同的行为，在你的架构的 ``local.h`` 中包括 ``asm-g
static void __exit test_exit(void)
{
del_timer_sync(&test_timer);
timer_shutdown_sync(&test_timer);
}
module_init(test_init);

8
arch/arm/mach-spear/time.c
View File

@ -90,7 +90,7 @@ static void __init spear_clocksource_init(void)
200, 16, clocksource_mmio_readw_up);
}
static inline void timer_shutdown(struct clock_event_device *evt)
static inline void spear_timer_shutdown(struct clock_event_device *evt)
{
u16 val = readw(gpt_base + CR(CLKEVT));
@ -101,7 +101,7 @@ static inline void timer_shutdown(struct clock_event_device *evt)
static int spear_shutdown(struct clock_event_device *evt)
{
timer_shutdown(evt);
spear_timer_shutdown(evt);
return 0;
}
@ -111,7 +111,7 @@ static int spear_set_oneshot(struct clock_event_device *evt)
u16 val;
/* stop the timer */
timer_shutdown(evt);
spear_timer_shutdown(evt);
val = readw(gpt_base + CR(CLKEVT));
val |= CTRL_ONE_SHOT;
@ -126,7 +126,7 @@ static int spear_set_periodic(struct clock_event_device *evt)
u16 val;
/* stop the timer */
timer_shutdown(evt);
spear_timer_shutdown(evt);
period = clk_get_rate(gpt_clk) / HZ;
period >>= CTRL_PRESCALER16;

22
arch/arm64/kernel/vdso.c
View File

@ -151,28 +151,6 @@ int vdso_join_timens(struct task_struct *task, struct time_namespace *ns)
mmap_read_unlock(mm);
return 0;
}
static struct page *find_timens_vvar_page(struct vm_area_struct *vma)
{
if (likely(vma->vm_mm == current->mm))
return current->nsproxy->time_ns->vvar_page;
/*
* VM_PFNMAP | VM_IO protect .fault() handler from being called
* through interfaces like /proc/$pid/mem or
* process_vm_{readv,writev}() as long as there's no .access()
* in special_mapping_vmops.
* For more details check_vma_flags() and __access_remote_vm()
*/
WARN(1, "vvar_page accessed remotely");
return NULL;
}
#else
static struct page *find_timens_vvar_page(struct vm_area_struct *vma)
{
return NULL;
}
#endif
static vm_fault_t vvar_fault(const struct vm_special_mapping *sm,

22
arch/powerpc/kernel/vdso.c
View File

@ -129,28 +129,6 @@ int vdso_join_timens(struct task_struct *task, struct time_namespace *ns)
return 0;
}
static struct page *find_timens_vvar_page(struct vm_area_struct *vma)
{
if (likely(vma->vm_mm == current->mm))
return current->nsproxy->time_ns->vvar_page;
/*
* VM_PFNMAP | VM_IO protect .fault() handler from being called
* through interfaces like /proc/$pid/mem or
* process_vm_{readv,writev}() as long as there's no .access()
* in special_mapping_vmops.
* For more details check_vma_flags() and __access_remote_vm()
*/
WARN(1, "vvar_page accessed remotely");
return NULL;
}
#else
static struct page *find_timens_vvar_page(struct vm_area_struct *vma)
{
return NULL;
}
#endif
static vm_fault_t vvar_fault(const struct vm_special_mapping *sm,

22
arch/riscv/kernel/vdso.c
View File

@ -137,28 +137,6 @@ int vdso_join_timens(struct task_struct *task, struct time_namespace *ns)
mmap_read_unlock(mm);
return 0;
}
static struct page *find_timens_vvar_page(struct vm_area_struct *vma)
{
if (likely(vma->vm_mm == current->mm))
return current->nsproxy->time_ns->vvar_page;
/*
* VM_PFNMAP | VM_IO protect .fault() handler from being called
* through interfaces like /proc/$pid/mem or
* process_vm_{readv,writev}() as long as there's no .access()
* in special_mapping_vmops.
* For more details check_vma_flags() and __access_remote_vm()
*/
WARN(1, "vvar_page accessed remotely");
return NULL;
}
#else
static struct page *find_timens_vvar_page(struct vm_area_struct *vma)
{
return NULL;
}
#endif
static vm_fault_t vvar_fault(const struct vm_special_mapping *sm,

20
arch/s390/kernel/vdso.c
View File

@ -44,21 +44,6 @@ struct vdso_data *arch_get_vdso_data(void *vvar_page)
return (struct vdso_data *)(vvar_page);
}
static struct page *find_timens_vvar_page(struct vm_area_struct *vma)
{
if (likely(vma->vm_mm == current->mm))
return current->nsproxy->time_ns->vvar_page;
/*
* VM_PFNMAP | VM_IO protect .fault() handler from being called
* through interfaces like /proc/$pid/mem or
* process_vm_{readv,writev}() as long as there's no .access()
* in special_mapping_vmops().
* For more details check_vma_flags() and __access_remote_vm()
*/
WARN(1, "vvar_page accessed remotely");
return NULL;
}
/*
* The VVAR page layout depends on whether a task belongs to the root or
* non-root time namespace. Whenever a task changes its namespace, the VVAR
@ -84,11 +69,6 @@ int vdso_join_timens(struct task_struct *task, struct time_namespace *ns)
mmap_read_unlock(mm);
return 0;
}
#else
static inline struct page *find_timens_vvar_page(struct vm_area_struct *vma)
{
return NULL;
}
#endif
static vm_fault_t vvar_fault(const struct vm_special_mapping *sm,

23
arch/x86/entry/vdso/vma.c
View File

@ -98,24 +98,6 @@ static int vdso_mremap(const struct vm_special_mapping *sm,
}
#ifdef CONFIG_TIME_NS
static struct page *find_timens_vvar_page(struct vm_area_struct *vma)
{
if (likely(vma->vm_mm == current->mm))
return current->nsproxy->time_ns->vvar_page;
/*
* VM_PFNMAP | VM_IO protect .fault() handler from being called
* through interfaces like /proc/$pid/mem or
* process_vm_{readv,writev}() as long as there's no .access()
* in special_mapping_vmops().
* For more details check_vma_flags() and __access_remote_vm()
*/
WARN(1, "vvar_page accessed remotely");
return NULL;
}
/*
* The vvar page layout depends on whether a task belongs to the root or
* non-root time namespace. Whenever a task changes its namespace, the VVAR
@ -140,11 +122,6 @@ int vdso_join_timens(struct task_struct *task, struct time_namespace *ns)
return 0;
}
#else
static inline struct page *find_timens_vvar_page(struct vm_area_struct *vma)
{
return NULL;
}
#endif
static vm_fault_t vvar_fault(const struct vm_special_mapping *sm,

10
drivers/bluetooth/hci_qca.c
View File

@ -696,9 +696,15 @@ static int qca_close(struct hci_uart *hu)
skb_queue_purge(&qca->tx_wait_q);
skb_queue_purge(&qca->txq);
skb_queue_purge(&qca->rx_memdump_q);
/*
* Shut the timers down so they can't be rearmed when
* destroy_workqueue() drains pending work which in turn might try
* to arm a timer. After shutdown rearm attempts are silently
* ignored by the timer core code.
*/
timer_shutdown_sync(&qca->tx_idle_timer);
timer_shutdown_sync(&qca->wake_retrans_timer);
destroy_workqueue(qca->workqueue);
del_timer_sync(&qca->tx_idle_timer);
del_timer_sync(&qca->wake_retrans_timer);
qca->hu = NULL;
kfree_skb(qca->rx_skb);

4
drivers/char/tpm/tpm-dev-common.c
View File

@ -155,7 +155,7 @@ ssize_t tpm_common_read(struct file *file, char __user *buf,
out:
if (!priv->response_length) {
*off = 0;
del_singleshot_timer_sync(&priv->user_read_timer);
del_timer_sync(&priv->user_read_timer);
flush_work(&priv->timeout_work);
}
mutex_unlock(&priv->buffer_mutex);
@ -262,7 +262,7 @@ __poll_t tpm_common_poll(struct file *file, poll_table *wait)
void tpm_common_release(struct file *file, struct file_priv *priv)
{
flush_work(&priv->async_work);
del_singleshot_timer_sync(&priv->user_read_timer);
del_timer_sync(&priv->user_read_timer);
flush_work(&priv->timeout_work);
file->private_data = NULL;
priv->response_length = 0;

15
drivers/clocksource/arm_arch_timer.c
View File

@ -18,6 +18,7 @@
#include <linux/clocksource.h>
#include <linux/clocksource_ids.h>
#include <linux/interrupt.h>
#include <linux/kstrtox.h>
#include <linux/of_irq.h>
#include <linux/of_address.h>
#include <linux/io.h>
@ -97,7 +98,7 @@ static bool evtstrm_enable __ro_after_init = IS_ENABLED(CONFIG_ARM_ARCH_TIMER_EV
static int __init early_evtstrm_cfg(char *buf)
{
return strtobool(buf, &evtstrm_enable);
return kstrtobool(buf, &evtstrm_enable);
}
early_param("clocksource.arm_arch_timer.evtstrm", early_evtstrm_cfg);
@ -687,8 +688,8 @@ static irqreturn_t arch_timer_handler_virt_mem(int irq, void *dev_id)
return timer_handler(ARCH_TIMER_MEM_VIRT_ACCESS, evt);
}
static __always_inline int timer_shutdown(const int access,
struct clock_event_device *clk)
static __always_inline int arch_timer_shutdown(const int access,
struct clock_event_device *clk)
{
unsigned long ctrl;
@ -701,22 +702,22 @@ static __always_inline int timer_shutdown(const int access,
static int arch_timer_shutdown_virt(struct clock_event_device *clk)
{
return timer_shutdown(ARCH_TIMER_VIRT_ACCESS, clk);
return arch_timer_shutdown(ARCH_TIMER_VIRT_ACCESS, clk);
}
static int arch_timer_shutdown_phys(struct clock_event_device *clk)
{
return timer_shutdown(ARCH_TIMER_PHYS_ACCESS, clk);
return arch_timer_shutdown(ARCH_TIMER_PHYS_ACCESS, clk);
}
static int arch_timer_shutdown_virt_mem(struct clock_event_device *clk)
{
return timer_shutdown(ARCH_TIMER_MEM_VIRT_ACCESS, clk);
return arch_timer_shutdown(ARCH_TIMER_MEM_VIRT_ACCESS, clk);
}
static int arch_timer_shutdown_phys_mem(struct clock_event_device *clk)
{
return timer_shutdown(ARCH_TIMER_MEM_PHYS_ACCESS, clk);
return arch_timer_shutdown(ARCH_TIMER_MEM_PHYS_ACCESS, clk);
}
static __always_inline void set_next_event(const int access, unsigned long evt,

10
drivers/clocksource/ingenic-ost.c
View File

@ -141,7 +141,7 @@ static int __init ingenic_ost_probe(struct platform_device *pdev)
return 0;
}
static int __maybe_unused ingenic_ost_suspend(struct device *dev)
static int ingenic_ost_suspend(struct device *dev)
{
struct ingenic_ost *ost = dev_get_drvdata(dev);
@ -150,14 +150,14 @@ static int __maybe_unused ingenic_ost_suspend(struct device *dev)
return 0;
}
static int __maybe_unused ingenic_ost_resume(struct device *dev)
static int ingenic_ost_resume(struct device *dev)
{
struct ingenic_ost *ost = dev_get_drvdata(dev);
return clk_enable(ost->clk);
}
static const struct dev_pm_ops __maybe_unused ingenic_ost_pm_ops = {
static const struct dev_pm_ops ingenic_ost_pm_ops = {
/* _noirq: We want the OST clock to be gated last / ungated first */
.suspend_noirq = ingenic_ost_suspend,
.resume_noirq = ingenic_ost_resume,
@ -181,9 +181,7 @@ static const struct of_device_id ingenic_ost_of_match[] = {
static struct platform_driver ingenic_ost_driver = {
.driver = {
.name = "ingenic-ost",
#ifdef CONFIG_PM_SUSPEND
.pm = &ingenic_ost_pm_ops,
#endif
.pm = pm_sleep_ptr(&ingenic_ost_pm_ops),
.of_match_table = ingenic_ost_of_match,
},
};

88
drivers/clocksource/sh_cmt.c
View File

@ -13,6 +13,7 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/iopoll.h>
#include <linux/ioport.h>
#include <linux/irq.h>
#include <linux/module.h>
@ -116,6 +117,7 @@ struct sh_cmt_device {
void __iomem *mapbase;
struct clk *clk;
unsigned long rate;
unsigned int reg_delay;
raw_spinlock_t lock; /* Protect the shared start/stop register */
@ -247,10 +249,17 @@ static inline u32 sh_cmt_read_cmstr(struct sh_cmt_channel *ch)
static inline void sh_cmt_write_cmstr(struct sh_cmt_channel *ch, u32 value)
{
if (ch->iostart)
ch->cmt->info->write_control(ch->iostart, 0, value);
else
ch->cmt->info->write_control(ch->cmt->mapbase, 0, value);
u32 old_value = sh_cmt_read_cmstr(ch);
if (value != old_value) {
if (ch->iostart) {
ch->cmt->info->write_control(ch->iostart, 0, value);
udelay(ch->cmt->reg_delay);
} else {
ch->cmt->info->write_control(ch->cmt->mapbase, 0, value);
udelay(ch->cmt->reg_delay);
}
}
}
static inline u32 sh_cmt_read_cmcsr(struct sh_cmt_channel *ch)
@ -260,7 +269,12 @@ static inline u32 sh_cmt_read_cmcsr(struct sh_cmt_channel *ch)
static inline void sh_cmt_write_cmcsr(struct sh_cmt_channel *ch, u32 value)
{
ch->cmt->info->write_control(ch->ioctrl, CMCSR, value);
u32 old_value = sh_cmt_read_cmcsr(ch);
if (value != old_value) {
ch->cmt->info->write_control(ch->ioctrl, CMCSR, value);
udelay(ch->cmt->reg_delay);
}
}
static inline u32 sh_cmt_read_cmcnt(struct sh_cmt_channel *ch)
@ -268,14 +282,33 @@ static inline u32 sh_cmt_read_cmcnt(struct sh_cmt_channel *ch)
return ch->cmt->info->read_count(ch->ioctrl, CMCNT);
}
static inline void sh_cmt_write_cmcnt(struct sh_cmt_channel *ch, u32 value)
static inline int sh_cmt_write_cmcnt(struct sh_cmt_channel *ch, u32 value)
{
/* Tests showed that we need to wait 3 clocks here */
unsigned int cmcnt_delay = DIV_ROUND_UP(3 * ch->cmt->reg_delay, 2);
u32 reg;
if (ch->cmt->info->model > SH_CMT_16BIT) {
int ret = read_poll_timeout_atomic(sh_cmt_read_cmcsr, reg,
!(reg & SH_CMT32_CMCSR_WRFLG),
1, cmcnt_delay, false, ch);
if (ret < 0)
return ret;
}
ch->cmt->info->write_count(ch->ioctrl, CMCNT, value);
udelay(cmcnt_delay);
return 0;
}
static inline void sh_cmt_write_cmcor(struct sh_cmt_channel *ch, u32 value)
{
ch->cmt->info->write_count(ch->ioctrl, CMCOR, value);
u32 old_value = ch->cmt->info->read_count(ch->ioctrl, CMCOR);
if (value != old_value) {
ch->cmt->info->write_count(ch->ioctrl, CMCOR, value);
udelay(ch->cmt->reg_delay);
}
}
static u32 sh_cmt_get_counter(struct sh_cmt_channel *ch, u32 *has_wrapped)
@ -319,7 +352,7 @@ static void sh_cmt_start_stop_ch(struct sh_cmt_channel *ch, int start)
static int sh_cmt_enable(struct sh_cmt_channel *ch)
{
int k, ret;
int ret;
dev_pm_syscore_device(&ch->cmt->pdev->dev, true);
@ -347,26 +380,9 @@ static int sh_cmt_enable(struct sh_cmt_channel *ch)
}
sh_cmt_write_cmcor(ch, 0xffffffff);
sh_cmt_write_cmcnt(ch, 0);
ret = sh_cmt_write_cmcnt(ch, 0);
/*
* According to the sh73a0 user's manual, as CMCNT can be operated
* only by the RCLK (Pseudo 32 kHz), there's one restriction on
* modifying CMCNT register; two RCLK cycles are necessary before
* this register is either read or any modification of the value
* it holds is reflected in the LSI's actual operation.
*
* While at it, we're supposed to clear out the CMCNT as of this
* moment, so make sure it's processed properly here. This will
* take RCLKx2 at maximum.
*/
for (k = 0; k < 100; k++) {
if (!sh_cmt_read_cmcnt(ch))
break;
udelay(1);
}
if (sh_cmt_read_cmcnt(ch)) {
if (ret || sh_cmt_read_cmcnt(ch)) {
dev_err(&ch->cmt->pdev->dev, "ch%u: cannot clear CMCNT\n",
ch->index);
ret = -ETIMEDOUT;
@ -995,8 +1011,8 @@ MODULE_DEVICE_TABLE(of, sh_cmt_of_table);
static int sh_cmt_setup(struct sh_cmt_device *cmt, struct platform_device *pdev)
{
unsigned int mask;
unsigned int i;
unsigned int mask, i;
unsigned long rate;
int ret;
cmt->pdev = pdev;
@ -1032,10 +1048,16 @@ static int sh_cmt_setup(struct sh_cmt_device *cmt, struct platform_device *pdev)
if (ret < 0)
goto err_clk_unprepare;
if (cmt->info->width == 16)
cmt->rate = clk_get_rate(cmt->clk) / 512;
else
cmt->rate = clk_get_rate(cmt->clk) / 8;
rate = clk_get_rate(cmt->clk);
if (!rate) {
ret = -EINVAL;
goto err_clk_disable;
}
/* We shall wait 2 input clks after register writes */
if (cmt->info->model >= SH_CMT_48BIT)
cmt->reg_delay = DIV_ROUND_UP(2UL * USEC_PER_SEC, rate);
cmt->rate = rate / (cmt->info->width == 16 ? 512 : 8);
/* Map the memory resource(s). */
ret = sh_cmt_map_memory(cmt);

10
drivers/clocksource/timer-npcm7xx.c
View File

@ -188,6 +188,7 @@ static void __init npcm7xx_clocksource_init(void)
static int __init npcm7xx_timer_init(struct device_node *np)
{
struct clk *clk;
int ret;
ret = timer_of_init(np, &npcm7xx_to);
@ -199,6 +200,15 @@ static int __init npcm7xx_timer_init(struct device_node *np)
npcm7xx_to.of_clk.rate = npcm7xx_to.of_clk.rate /
(NPCM7XX_Tx_MIN_PRESCALE + 1);
/* Enable the clock for timer1, if it exists */
clk = of_clk_get(np, 1);
if (clk) {
if (!IS_ERR(clk))
clk_prepare_enable(clk);
else
pr_warn("%pOF: Failed to get clock for timer1: %pe", np, clk);
}
npcm7xx_clocksource_init();
npcm7xx_clockevents_init();

6
drivers/clocksource/timer-sp804.c
View File

@ -155,14 +155,14 @@ static irqreturn_t sp804_timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
static inline void timer_shutdown(struct clock_event_device *evt)
static inline void evt_timer_shutdown(struct clock_event_device *evt)
{
writel(0, common_clkevt->ctrl);
}
static int sp804_shutdown(struct clock_event_device *evt)
{
timer_shutdown(evt);
evt_timer_shutdown(evt);
return 0;
}
@ -171,7 +171,7 @@ static int sp804_set_periodic(struct clock_event_device *evt)
unsigned long ctrl = TIMER_CTRL_32BIT | TIMER_CTRL_IE |
TIMER_CTRL_PERIODIC | TIMER_CTRL_ENABLE;
timer_shutdown(evt);
evt_timer_shutdown(evt);
writel(common_clkevt->reload, common_clkevt->load);
writel(ctrl, common_clkevt->ctrl);
return 0;

4
drivers/clocksource/timer-ti-dm-systimer.c
View File

@ -345,8 +345,10 @@ static int __init dmtimer_systimer_init_clock(struct dmtimer_systimer *t,
return error;
r = clk_get_rate(clock);
if (!r)
if (!r) {
clk_disable_unprepare(clock);
return -ENODEV;
}
if (is_ick)
t->ick = clock;

21
drivers/clocksource/timer-ti-dm.c
View File

@ -633,6 +633,8 @@ static struct omap_dm_timer *omap_dm_timer_request_by_node(struct device_node *n
static int omap_dm_timer_free(struct omap_dm_timer *cookie)
{
struct dmtimer *timer;
struct device *dev;
int rc;
timer = to_dmtimer(cookie);
if (unlikely(!timer))
@ -640,10 +642,21 @@ static int omap_dm_timer_free(struct omap_dm_timer *cookie)
WARN_ON(!timer->reserved);
timer->reserved = 0;
dev = &timer->pdev->dev;
rc = pm_runtime_resume_and_get(dev);
if (rc)
return rc;
/* Clear timer configuration */
dmtimer_write(timer, OMAP_TIMER_CTRL_REG, 0);
pm_runtime_put_sync(dev);
return 0;
}
int omap_dm_timer_get_irq(struct omap_dm_timer *cookie)
static int omap_dm_timer_get_irq(struct omap_dm_timer *cookie)
{
struct dmtimer *timer = to_dmtimer(cookie);
if (timer)
@ -1135,6 +1148,10 @@ static int omap_dm_timer_probe(struct platform_device *pdev)
goto err_disable;
}
__omap_dm_timer_init_regs(timer);
/* Clear timer configuration */
dmtimer_write(timer, OMAP_TIMER_CTRL_REG, 0);
pm_runtime_put(dev);
}
@ -1258,7 +1275,7 @@ static struct platform_driver omap_dm_timer_driver = {
.remove = omap_dm_timer_remove,
.driver = {
.name = "omap_timer",
.of_match_table = of_match_ptr(omap_timer_match),
.of_match_table = omap_timer_match,
.pm = &omap_dm_timer_pm_ops,
},
};

4
drivers/staging/wlan-ng/hfa384x_usb.c
View File

@ -1116,8 +1116,8 @@ cleanup:
if (ctlx == get_active_ctlx(hw)) {
spin_unlock_irqrestore(&hw->ctlxq.lock, flags);
del_singleshot_timer_sync(&hw->reqtimer);
del_singleshot_timer_sync(&hw->resptimer);
del_timer_sync(&hw->reqtimer);
del_timer_sync(&hw->resptimer);
hw->req_timer_done = 1;
hw->resp_timer_done = 1;
usb_kill_urb(&hw->ctlx_urb);

6
drivers/staging/wlan-ng/prism2usb.c
View File

@ -170,9 +170,9 @@ static void prism2sta_disconnect_usb(struct usb_interface *interface)
*/
prism2sta_ifstate(wlandev, P80211ENUM_ifstate_disable);
del_singleshot_timer_sync(&hw->throttle);
del_singleshot_timer_sync(&hw->reqtimer);
del_singleshot_timer_sync(&hw->resptimer);
del_timer_sync(&hw->throttle);
del_timer_sync(&hw->reqtimer);
del_timer_sync(&hw->resptimer);
/* Unlink all the URBs. This "removes the wheels"
* from the entire CTLX handling mechanism.

2
include/clocksource/timer-ti-dm.h
View File

@ -62,8 +62,6 @@
struct omap_dm_timer {
};
int omap_dm_timer_get_irq(struct omap_dm_timer *timer);
u32 omap_dm_timer_modify_idlect_mask(u32 inputmask);
/*

6
include/linux/time_namespace.h
View File

@ -45,6 +45,7 @@ struct time_namespace *copy_time_ns(unsigned long flags,
void free_time_ns(struct time_namespace *ns);
void timens_on_fork(struct nsproxy *nsproxy, struct task_struct *tsk);
struct vdso_data *arch_get_vdso_data(void *vvar_page);
struct page *find_timens_vvar_page(struct vm_area_struct *vma);
static inline void put_time_ns(struct time_namespace *ns)
{
@ -141,6 +142,11 @@ static inline void timens_on_fork(struct nsproxy *nsproxy,
return;
}
static inline struct page *find_timens_vvar_page(struct vm_area_struct *vma)
{
return NULL;
}
static inline void timens_add_monotonic(struct timespec64 *ts) { }
static inline void timens_add_boottime(struct timespec64 *ts) { }

35
include/linux/timer.h
View File

@ -169,7 +169,6 @@ static inline int timer_pending(const struct timer_list * timer)
}
extern void add_timer_on(struct timer_list *timer, int cpu);
extern int del_timer(struct timer_list * timer);
extern int mod_timer(struct timer_list *timer, unsigned long expires);
extern int mod_timer_pending(struct timer_list *timer, unsigned long expires);
extern int timer_reduce(struct timer_list *timer, unsigned long expires);
@ -183,14 +182,36 @@ extern int timer_reduce(struct timer_list *timer, unsigned long expires);
extern void add_timer(struct timer_list *timer);
extern int try_to_del_timer_sync(struct timer_list *timer);
extern int timer_delete_sync(struct timer_list *timer);
extern int timer_delete(struct timer_list *timer);
extern int timer_shutdown_sync(struct timer_list *timer);
extern int timer_shutdown(struct timer_list *timer);
#if defined(CONFIG_SMP) || defined(CONFIG_PREEMPT_RT)
extern int del_timer_sync(struct timer_list *timer);
#else
# define del_timer_sync(t) del_timer(t)
#endif
/**
* del_timer_sync - Delete a pending timer and wait for a running callback
* @timer: The timer to be deleted
*
* See timer_delete_sync() for detailed explanation.
*
* Do not use in new code. Use timer_delete_sync() instead.
*/
static inline int del_timer_sync(struct timer_list *timer)
{
return timer_delete_sync(timer);
}
#define del_singleshot_timer_sync(t) del_timer_sync(t)
/**
* del_timer - Delete a pending timer
* @timer: The timer to be deleted
*
* See timer_delete() for detailed explanation.
*
* Do not use in new code. Use timer_delete() instead.
*/
static inline int del_timer(struct timer_list *timer)
{
return timer_delete(timer);
}
extern void init_timers(void);
struct hrtimer;

2
include/linux/timerqueue.h
View File

@ -35,7 +35,7 @@ struct timerqueue_node *timerqueue_getnext(struct timerqueue_head *head)
{
struct rb_node *leftmost = rb_first_cached(&head->rb_root);
return rb_entry(leftmost, struct timerqueue_node, node);
return rb_entry_safe(leftmost, struct timerqueue_node, node);
}
static inline void timerqueue_init(struct timerqueue_node *node)

2
kernel/time/clockevents.c
View File

@ -76,7 +76,7 @@ static u64 cev_delta2ns(unsigned long latch, struct clock_event_device *evt,
}
/**
* clockevents_delta2ns - Convert a latch value (device ticks) to nanoseconds
* clockevent_delta2ns - Convert a latch value (device ticks) to nanoseconds
* @latch: value to convert
* @evt: pointer to clock event device descriptor
*

18
kernel/time/namespace.c
View File

@ -192,6 +192,24 @@ static void timens_setup_vdso_data(struct vdso_data *vdata,
offset[CLOCK_BOOTTIME_ALARM] = boottime;
}
struct page *find_timens_vvar_page(struct vm_area_struct *vma)
{
if (likely(vma->vm_mm == current->mm))
return current->nsproxy->time_ns->vvar_page;
/*
* VM_PFNMAP | VM_IO protect .fault() handler from being called
* through interfaces like /proc/$pid/mem or
* process_vm_{readv,writev}() as long as there's no .access()
* in special_mapping_vmops().
* For more details check_vma_flags() and __access_remote_vm()
*/
WARN(1, "vvar_page accessed remotely");
return NULL;
}
/*
* Protects possibly multiple offsets writers racing each other
* and tasks entering the namespace.

415
kernel/time/timer.c
View File

@ -1017,7 +1017,7 @@ __mod_timer(struct timer_list *timer, unsigned long expires, unsigned int option
unsigned int idx = UINT_MAX;
int ret = 0;
BUG_ON(!timer->function);
debug_assert_init(timer);
/*
* This is a common optimization triggered by the networking code - if
@ -1044,6 +1044,14 @@ __mod_timer(struct timer_list *timer, unsigned long expires, unsigned int option
* dequeue/enqueue dance.
*/
base = lock_timer_base(timer, &flags);
/*
* Has @timer been shutdown? This needs to be evaluated
* while holding base lock to prevent a race against the
* shutdown code.
*/
if (!timer->function)
goto out_unlock;
forward_timer_base(base);
if (timer_pending(timer) && (options & MOD_TIMER_REDUCE) &&
@ -1070,6 +1078,14 @@ __mod_timer(struct timer_list *timer, unsigned long expires, unsigned int option
}
} else {
base = lock_timer_base(timer, &flags);
/*
* Has @timer been shutdown? This needs to be evaluated
* while holding base lock to prevent a race against the
* shutdown code.
*/
if (!timer->function)
goto out_unlock;
forward_timer_base(base);
}
@ -1083,7 +1099,7 @@ __mod_timer(struct timer_list *timer, unsigned long expires, unsigned int option
/*
* We are trying to schedule the timer on the new base.
* However we can't change timer's base while it is running,
* otherwise del_timer_sync() can't detect that the timer's
* otherwise timer_delete_sync() can't detect that the timer's
* handler yet has not finished. This also guarantees that the
* timer is serialized wrt itself.
*/
@ -1121,14 +1137,20 @@ out_unlock:
}
/**
* mod_timer_pending - modify a pending timer's timeout
* @timer: the pending timer to be modified
* @expires: new timeout in jiffies
* mod_timer_pending - Modify a pending timer's timeout
* @timer: The pending timer to be modified
* @expires: New absolute timeout in jiffies
*
* mod_timer_pending() is the same for pending timers as mod_timer(),
* but will not re-activate and modify already deleted timers.
* mod_timer_pending() is the same for pending timers as mod_timer(), but
* will not activate inactive timers.
*
* It is useful for unserialized use of timers.
* If @timer->function == NULL then the start operation is silently
* discarded.
*
* Return:
* * %0 - The timer was inactive and not modified or was in
* shutdown state and the operation was discarded
* * %1 - The timer was active and requeued to expire at @expires
*/
int mod_timer_pending(struct timer_list *timer, unsigned long expires)
{
@ -1137,24 +1159,31 @@ int mod_timer_pending(struct timer_list *timer, unsigned long expires)
EXPORT_SYMBOL(mod_timer_pending);
/**
* mod_timer - modify a timer's timeout
* @timer: the timer to be modified
* @expires: new timeout in jiffies
*
* mod_timer() is a more efficient way to update the expire field of an
* active timer (if the timer is inactive it will be activated)
* mod_timer - Modify a timer's timeout
* @timer: The timer to be modified
* @expires: New absolute timeout in jiffies
*
* mod_timer(timer, expires) is equivalent to:
*
* del_timer(timer); timer->expires = expires; add_timer(timer);
*
* mod_timer() is more efficient than the above open coded sequence. In
* case that the timer is inactive, the del_timer() part is a NOP. The
* timer is in any case activated with the new expiry time @expires.
*
* Note that if there are multiple unserialized concurrent users of the
* same timer, then mod_timer() is the only safe way to modify the timeout,
* since add_timer() cannot modify an already running timer.
*
* The function returns whether it has modified a pending timer or not.
* (ie. mod_timer() of an inactive timer returns 0, mod_timer() of an
* active timer returns 1.)
* If @timer->function == NULL then the start operation is silently
* discarded. In this case the return value is 0 and meaningless.
*
* Return:
* * %0 - The timer was inactive and started or was in shutdown
* state and the operation was discarded
* * %1 - The timer was active and requeued to expire at @expires or
* the timer was active and not modified because @expires did
* not change the effective expiry time
*/
int mod_timer(struct timer_list *timer, unsigned long expires)
{
@ -1165,11 +1194,22 @@ EXPORT_SYMBOL(mod_timer);
/**
* timer_reduce - Modify a timer's timeout if it would reduce the timeout
* @timer: The timer to be modified
* @expires: New timeout in jiffies
* @expires: New absolute timeout in jiffies
*
* timer_reduce() is very similar to mod_timer(), except that it will only
* modify a running timer if that would reduce the expiration time (it will
* start a timer that isn't running).
* modify an enqueued timer if that would reduce the expiration time. If
* @timer is not enqueued it starts the timer.
*
* If @timer->function == NULL then the start operation is silently
* discarded.
*
* Return:
* * %0 - The timer was inactive and started or was in shutdown
* state and the operation was discarded
* * %1 - The timer was active and requeued to expire at @expires or
* the timer was active and not modified because @expires
* did not change the effective expiry time such that the
* timer would expire earlier than already scheduled
*/
int timer_reduce(struct timer_list *timer, unsigned long expires)
{
@ -1178,39 +1218,51 @@ int timer_reduce(struct timer_list *timer, unsigned long expires)
EXPORT_SYMBOL(timer_reduce);
/**
* add_timer - start a timer
* @timer: the timer to be added
* add_timer - Start a timer
* @timer: The timer to be started
*
* The kernel will do a ->function(@timer) callback from the
* timer interrupt at the ->expires point in the future. The
* current time is 'jiffies'.
* Start @timer to expire at @timer->expires in the future. @timer->expires
* is the absolute expiry time measured in 'jiffies'. When the timer expires
* timer->function(timer) will be invoked from soft interrupt context.
*
* The timer's ->expires, ->function fields must be set prior calling this
* function.
* The @timer->expires and @timer->function fields must be set prior
* to calling this function.
*
* Timers with an ->expires field in the past will be executed in the next
* timer tick.
* If @timer->function == NULL then the start operation is silently
* discarded.
*
* If @timer->expires is already in the past @timer will be queued to
* expire at the next timer tick.
*
* This can only operate on an inactive timer. Attempts to invoke this on
* an active timer are rejected with a warning.
*/
void add_timer(struct timer_list *timer)
{
BUG_ON(timer_pending(timer));
if (WARN_ON_ONCE(timer_pending(timer)))
return;
__mod_timer(timer, timer->expires, MOD_TIMER_NOTPENDING);
}
EXPORT_SYMBOL(add_timer);
/**
* add_timer_on - start a timer on a particular CPU
* @timer: the timer to be added
* @cpu: the CPU to start it on
* add_timer_on - Start a timer on a particular CPU
* @timer: The timer to be started
* @cpu: The CPU to start it on
*
* This is not very scalable on SMP. Double adds are not possible.
* Same as add_timer() except that it starts the timer on the given CPU.
*
* See add_timer() for further details.
*/
void add_timer_on(struct timer_list *timer, int cpu)
{
struct timer_base *new_base, *base;
unsigned long flags;
BUG_ON(timer_pending(timer) || !timer->function);
debug_assert_init(timer);
if (WARN_ON_ONCE(timer_pending(timer)))
return;
new_base = get_timer_cpu_base(timer->flags, cpu);
@ -1220,6 +1272,13 @@ void add_timer_on(struct timer_list *timer, int cpu)
* wrong base locked. See lock_timer_base().
*/
base = lock_timer_base(timer, &flags);
/*
* Has @timer been shutdown? This needs to be evaluated while
* holding base lock to prevent a race against the shutdown code.
*/
if (!timer->function)
goto out_unlock;
if (base != new_base) {
timer->flags |= TIMER_MIGRATING;
@ -1233,22 +1292,27 @@ void add_timer_on(struct timer_list *timer, int cpu)
debug_timer_activate(timer);
internal_add_timer(base, timer);
out_unlock:
raw_spin_unlock_irqrestore(&base->lock, flags);
}
EXPORT_SYMBOL_GPL(add_timer_on);
/**
* del_timer - deactivate a timer.
* @timer: the timer to be deactivated
* __timer_delete - Internal function: Deactivate a timer
* @timer: The timer to be deactivated
* @shutdown: If true, this indicates that the timer is about to be
* shutdown permanently.
*
* del_timer() deactivates a timer - this works on both active and inactive
* timers.
* If @shutdown is true then @timer->function is set to NULL under the
* timer base lock which prevents further rearming of the time. In that
* case any attempt to rearm @timer after this function returns will be
* silently ignored.
*
* The function returns whether it has deactivated a pending timer or not.
* (ie. del_timer() of an inactive timer returns 0, del_timer() of an
* active timer returns 1.)
* Return:
* * %0 - The timer was not pending
* * %1 - The timer was pending and deactivated
*/
int del_timer(struct timer_list *timer)
static int __timer_delete(struct timer_list *timer, bool shutdown)
{
struct timer_base *base;
unsigned long flags;
@ -1256,24 +1320,90 @@ int del_timer(struct timer_list *timer)
debug_assert_init(timer);
if (timer_pending(timer)) {
/*
* If @shutdown is set then the lock has to be taken whether the
* timer is pending or not to protect against a concurrent rearm
* which might hit between the lockless pending check and the lock
* aquisition. By taking the lock it is ensured that such a newly
* enqueued timer is dequeued and cannot end up with
* timer->function == NULL in the expiry code.
*
* If timer->function is currently executed, then this makes sure
* that the callback cannot requeue the timer.
*/
if (timer_pending(timer) || shutdown) {
base = lock_timer_base(timer, &flags);
ret = detach_if_pending(timer, base, true);
if (shutdown)
timer->function = NULL;
raw_spin_unlock_irqrestore(&base->lock, flags);
}
return ret;
}
EXPORT_SYMBOL(del_timer);
/**
* try_to_del_timer_sync - Try to deactivate a timer
* @timer: timer to delete
* timer_delete - Deactivate a timer
* @timer: The timer to be deactivated
*
* This function tries to deactivate a timer. Upon successful (ret >= 0)
* exit the timer is not queued and the handler is not running on any CPU.
* The function only deactivates a pending timer, but contrary to
* timer_delete_sync() it does not take into account whether the timer's
* callback function is concurrently executed on a different CPU or not.
* It neither prevents rearming of the timer. If @timer can be rearmed
* concurrently then the return value of this function is meaningless.
*
* Return:
* * %0 - The timer was not pending
* * %1 - The timer was pending and deactivated
*/
int try_to_del_timer_sync(struct timer_list *timer)
int timer_delete(struct timer_list *timer)
{
return __timer_delete(timer, false);
}
EXPORT_SYMBOL(timer_delete);
/**
* timer_shutdown - Deactivate a timer and prevent rearming
* @timer: The timer to be deactivated
*
* The function does not wait for an eventually running timer callback on a
* different CPU but it prevents rearming of the timer. Any attempt to arm
* @timer after this function returns will be silently ignored.
*
* This function is useful for teardown code and should only be used when
* timer_shutdown_sync() cannot be invoked due to locking or context constraints.
*
* Return:
* * %0 - The timer was not pending
* * %1 - The timer was pending
*/
int timer_shutdown(struct timer_list *timer)
{
return __timer_delete(timer, true);
}
EXPORT_SYMBOL_GPL(timer_shutdown);
/**
* __try_to_del_timer_sync - Internal function: Try to deactivate a timer
* @timer: Timer to deactivate
* @shutdown: If true, this indicates that the timer is about to be
* shutdown permanently.
*
* If @shutdown is true then @timer->function is set to NULL under the
* timer base lock which prevents further rearming of the timer. Any
* attempt to rearm @timer after this function returns will be silently
* ignored.
*
* This function cannot guarantee that the timer cannot be rearmed
* right after dropping the base lock if @shutdown is false. That
* needs to be prevented by the calling code if necessary.
*
* Return:
* * %0 - The timer was not pending
* * %1 - The timer was pending and deactivated
* * %-1 - The timer callback function is running on a different CPU
*/
static int __try_to_del_timer_sync(struct timer_list *timer, bool shutdown)
{
struct timer_base *base;
unsigned long flags;
@ -1285,11 +1415,34 @@ int try_to_del_timer_sync(struct timer_list *timer)
if (base->running_timer != timer)
ret = detach_if_pending(timer, base, true);
if (shutdown)
timer->function = NULL;
raw_spin_unlock_irqrestore(&base->lock, flags);
return ret;
}
/**
* try_to_del_timer_sync - Try to deactivate a timer
* @timer: Timer to deactivate
*
* This function tries to deactivate a timer. On success the timer is not
* queued and the timer callback function is not running on any CPU.
*
* This function does not guarantee that the timer cannot be rearmed right
* after dropping the base lock. That needs to be prevented by the calling
* code if necessary.
*
* Return:
* * %0 - The timer was not pending
* * %1 - The timer was pending and deactivated
* * %-1 - The timer callback function is running on a different CPU
*/
int try_to_del_timer_sync(struct timer_list *timer)
{
return __try_to_del_timer_sync(timer, false);
}
EXPORT_SYMBOL(try_to_del_timer_sync);
#ifdef CONFIG_PREEMPT_RT
@ -1365,44 +1518,29 @@ static inline void timer_sync_wait_running(struct timer_base *base) { }
static inline void del_timer_wait_running(struct timer_list *timer) { }
#endif
#if defined(CONFIG_SMP) || defined(CONFIG_PREEMPT_RT)
/**
* del_timer_sync - deactivate a timer and wait for the handler to finish.
* @timer: the timer to be deactivated
* __timer_delete_sync - Internal function: Deactivate a timer and wait
* for the handler to finish.
* @timer: The timer to be deactivated
* @shutdown: If true, @timer->function will be set to NULL under the
* timer base lock which prevents rearming of @timer
*
* This function only differs from del_timer() on SMP: besides deactivating
* the timer it also makes sure the handler has finished executing on other
* CPUs.
* If @shutdown is not set the timer can be rearmed later. If the timer can
* be rearmed concurrently, i.e. after dropping the base lock then the
* return value is meaningless.
*
* Synchronization rules: Callers must prevent restarting of the timer,
* otherwise this function is meaningless. It must not be called from
* interrupt contexts unless the timer is an irqsafe one. The caller must
* not hold locks which would prevent completion of the timer's
* handler. The timer's handler must not call add_timer_on(). Upon exit the
* timer is not queued and the handler is not running on any CPU.
* If @shutdown is set then @timer->function is set to NULL under timer
* base lock which prevents rearming of the timer. Any attempt to rearm
* a shutdown timer is silently ignored.
*
* Note: For !irqsafe timers, you must not hold locks that are held in
* interrupt context while calling this function. Even if the lock has
* nothing to do with the timer in question. Here's why::
* If the timer should be reused after shutdown it has to be initialized
* again.
*
* CPU0 CPU1
* ---- ----
* <SOFTIRQ>
* call_timer_fn();
* base->running_timer = mytimer;
* spin_lock_irq(somelock);
* <IRQ>
* spin_lock(somelock);
* del_timer_sync(mytimer);
* while (base->running_timer == mytimer);
*
* Now del_timer_sync() will never return and never release somelock.
* The interrupt on the other CPU is waiting to grab somelock but
* it has interrupted the softirq that CPU0 is waiting to finish.
*
* The function returns whether it has deactivated a pending timer or not.
* Return:
* * %0 - The timer was not pending
* * %1 - The timer was pending and deactivated
*/
int del_timer_sync(struct timer_list *timer)
static int __timer_delete_sync(struct timer_list *timer, bool shutdown)
{
int ret;
@ -1422,7 +1560,7 @@ int del_timer_sync(struct timer_list *timer)
* don't use it in hardirq context, because it
* could lead to deadlock.
*/
WARN_ON(in_irq() && !(timer->flags & TIMER_IRQSAFE));
WARN_ON(in_hardirq() && !(timer->flags & TIMER_IRQSAFE));
/*
* Must be able to sleep on PREEMPT_RT because of the slowpath in
@ -1432,7 +1570,7 @@ int del_timer_sync(struct timer_list *timer)
lockdep_assert_preemption_enabled();
do {
ret = try_to_del_timer_sync(timer);
ret = __try_to_del_timer_sync(timer, shutdown);
if (unlikely(ret < 0)) {
del_timer_wait_running(timer);
@ -1442,8 +1580,96 @@ int del_timer_sync(struct timer_list *timer)
return ret;
}
EXPORT_SYMBOL(del_timer_sync);
#endif
/**
* timer_delete_sync - Deactivate a timer and wait for the handler to finish.
* @timer: The timer to be deactivated
*
* Synchronization rules: Callers must prevent restarting of the timer,
* otherwise this function is meaningless. It must not be called from
* interrupt contexts unless the timer is an irqsafe one. The caller must
* not hold locks which would prevent completion of the timer's callback
* function. The timer's handler must not call add_timer_on(). Upon exit
* the timer is not queued and the handler is not running on any CPU.
*
* For !irqsafe timers, the caller must not hold locks that are held in
* interrupt context. Even if the lock has nothing to do with the timer in
* question. Here's why::
*
* CPU0 CPU1
* ---- ----
* <SOFTIRQ>
* call_timer_fn();
* base->running_timer = mytimer;
* spin_lock_irq(somelock);
* <IRQ>
* spin_lock(somelock);
* timer_delete_sync(mytimer);
* while (base->running_timer == mytimer);
*
* Now timer_delete_sync() will never return and never release somelock.
* The interrupt on the other CPU is waiting to grab somelock but it has
* interrupted the softirq that CPU0 is waiting to finish.
*
* This function cannot guarantee that the timer is not rearmed again by
* some concurrent or preempting code, right after it dropped the base
* lock. If there is the possibility of a concurrent rearm then the return
* value of the function is meaningless.
*
* If such a guarantee is needed, e.g. for teardown situations then use
* timer_shutdown_sync() instead.
*
* Return:
* * %0 - The timer was not pending
* * %1 - The timer was pending and deactivated
*/
int timer_delete_sync(struct timer_list *timer)
{
return __timer_delete_sync(timer, false);
}
EXPORT_SYMBOL(timer_delete_sync);
/**
* timer_shutdown_sync - Shutdown a timer and prevent rearming
* @timer: The timer to be shutdown
*
* When the function returns it is guaranteed that:
* - @timer is not queued
* - The callback function of @timer is not running
* - @timer cannot be enqueued again. Any attempt to rearm
* @timer is silently ignored.
*
* See timer_delete_sync() for synchronization rules.
*
* This function is useful for final teardown of an infrastructure where
* the timer is subject to a circular dependency problem.
*
* A common pattern for this is a timer and a workqueue where the timer can
* schedule work and work can arm the timer. On shutdown the workqueue must
* be destroyed and the timer must be prevented from rearming. Unless the
* code has conditionals like 'if (mything->in_shutdown)' to prevent that
* there is no way to get this correct with timer_delete_sync().
*
* timer_shutdown_sync() is solving the problem. The correct ordering of
* calls in this case is:
*
* timer_shutdown_sync(&mything->timer);
* workqueue_destroy(&mything->workqueue);
*
* After this 'mything' can be safely freed.
*
* This obviously implies that the timer is not required to be functional
* for the rest of the shutdown operation.
*
* Return:
* * %0 - The timer was not pending
* * %1 - The timer was pending
*/
int timer_shutdown_sync(struct timer_list *timer)
{
return __timer_delete_sync(timer, true);
}
EXPORT_SYMBOL_GPL(timer_shutdown_sync);
static void call_timer_fn(struct timer_list *timer,
void (*fn)(struct timer_list *),
@ -1465,8 +1691,8 @@ static void call_timer_fn(struct timer_list *timer,
#endif
/*
* Couple the lock chain with the lock chain at
* del_timer_sync() by acquiring the lock_map around the fn()
* call here and in del_timer_sync().
* timer_delete_sync() by acquiring the lock_map around the fn()
* call here and in timer_delete_sync().
*/
lock_map_acquire(&lockdep_map);
@ -1509,6 +1735,12 @@ static void expire_timers(struct timer_base *base, struct hlist_head *head)
fn = timer->function;
if (WARN_ON_ONCE(!fn)) {
/* Should never happen. Emphasis on should! */
base->running_timer = NULL;
continue;
}
if (timer->flags & TIMER_IRQSAFE) {
raw_spin_unlock(&base->lock);
call_timer_fn(timer, fn, baseclk);
@ -1933,7 +2165,7 @@ signed long __sched schedule_timeout(signed long timeout)
timer_setup_on_stack(&timer.timer, process_timeout, 0);
__mod_timer(&timer.timer, expire, MOD_TIMER_NOTPENDING);
schedule();
del_singleshot_timer_sync(&timer.timer);
del_timer_sync(&timer.timer);
/* Remove the timer from the object tracker */
destroy_timer_on_stack(&timer.timer);
@ -2017,8 +2249,6 @@ int timers_dead_cpu(unsigned int cpu)
struct timer_base *new_base;
int b, i;
BUG_ON(cpu_online(cpu));
for (b = 0; b < NR_BASES; b++) {
old_base = per_cpu_ptr(&timer_bases[b], cpu);
new_base = get_cpu_ptr(&timer_bases[b]);
@ -2035,7 +2265,8 @@ int timers_dead_cpu(unsigned int cpu)
*/
forward_timer_base(new_base);
BUG_ON(old_base->running_timer);
WARN_ON_ONCE(old_base->running_timer);
old_base->running_timer = NULL;
for (i = 0; i < WHEEL_SIZE; i++)
migrate_timer_list(new_base, old_base->vectors + i);

2
net/sunrpc/xprt.c
View File

@ -1164,7 +1164,7 @@ xprt_request_enqueue_receive(struct rpc_task *task)
spin_unlock(&xprt->queue_lock);
/* Turn off autodisconnect */
del_singleshot_timer_sync(&xprt->timer);
del_timer_sync(&xprt->timer);
return 0;
}