From 7cef07d5cd25b1286376d1e8948f75b89d34a37e Mon Sep 17 00:00:00 2001 From: Shiraz Hashim Date: Mon, 3 Sep 2012 11:46:58 +0530 Subject: [PATCH 01/14] ARM: SPEAr13xx: DT: Add spics gpio controller nodes SPEAr platform provides a provision to control chipselects of ARM PL022 Prime Cell spi controller through its system registers, which otherwise remains under PL022 control which some protocols do not want. This patch adds spics controller nodes in device tree for various SPEAr13xx SoCs. Cc: Linus Walleij Signed-off-by: Shiraz Hashim Reviewed-by: Vipin Kumar Signed-off-by: Viresh Kumar --- arch/arm/boot/dts/spear1310.dtsi | 12 ++++++++++++ arch/arm/boot/dts/spear1340.dtsi | 14 ++++++++++++++ 2 files changed, 26 insertions(+) diff --git a/arch/arm/boot/dts/spear1310.dtsi b/arch/arm/boot/dts/spear1310.dtsi index 7cd25eb4f8e0..f489f648c6eb 100644 --- a/arch/arm/boot/dts/spear1310.dtsi +++ b/arch/arm/boot/dts/spear1310.dtsi @@ -17,6 +17,18 @@ compatible = "st,spear1310"; ahb { + spics: spics@e0700000{ + compatible = "st,spear-spics-gpio"; + reg = <0xe0700000 0x1000>; + st-spics,peripcfg-reg = <0x3b0>; + st-spics,sw-enable-bit = <12>; + st-spics,cs-value-bit = <11>; + st-spics,cs-enable-mask = <3>; + st-spics,cs-enable-shift = <8>; + gpio-controller; + #gpio-cells = <2>; + }; + ahci@b1000000 { compatible = "snps,spear-ahci"; reg = <0xb1000000 0x10000>; diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi index 6c09eb0a1b2b..64d14fde215d 100644 --- a/arch/arm/boot/dts/spear1340.dtsi +++ b/arch/arm/boot/dts/spear1340.dtsi @@ -17,6 +17,20 @@ compatible = "st,spear1340"; ahb { + + spics: spics@e0700000{ + compatible = "st,spear-spics-gpio"; + reg = <0xe0700000 0x1000>; + st-spics,peripcfg-reg = <0x42c>; + st-spics,sw-enable-bit = <21>; + st-spics,cs-value-bit = <20>; + st-spics,cs-enable-mask = <3>; + st-spics,cs-enable-shift = <18>; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + ahci@b1000000 { compatible = "snps,spear-ahci"; reg = <0xb1000000 0x10000>; From 7db083e0e1b70b0300eeb5945538e725c018f8e0 Mon Sep 17 00:00:00 2001 From: Vipul Kumar Samar Date: Thu, 5 Jul 2012 11:51:47 +0800 Subject: [PATCH 02/14] ARM: SPEAr: DT: Update pinctrl list This patch updates pinctrl configuration for SPEAr SoC's. Signed-off-by: Shiraz Hashim Signed-off-by: Vipul Kumar Samar Signed-off-by: Viresh Kumar --- arch/arm/boot/dts/spear1310-evb.dts | 23 ++++++++++++++----- arch/arm/boot/dts/spear1340-evb.dts | 35 +++++++++++++++++------------ arch/arm/boot/dts/spear320-evb.dts | 6 +---- 3 files changed, 39 insertions(+), 25 deletions(-) diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts index 2e4c5727468e..3448d60117ec 100644 --- a/arch/arm/boot/dts/spear1310-evb.dts +++ b/arch/arm/boot/dts/spear1310-evb.dts @@ -30,10 +30,14 @@ pinctrl-0 = <&state_default>; state_default: pinmux { - i2c0-pmx { + i2c0 { st,pins = "i2c0_grp"; st,function = "i2c0"; }; + i2s0 { + st,pins = "i2s0_grp"; + st,function = "i2s0"; + }; i2s1 { st,pins = "i2s1_grp"; st,function = "i2s1"; @@ -42,6 +46,10 @@ st,pins = "arm_gpio_grp"; st,function = "arm_gpio"; }; + clcd { + st,pins = "clcd_grp" , "clcd_high_res"; + st,function = "clcd"; + }; eth { st,pins = "gmii_grp"; st,function = "gmii"; @@ -74,11 +82,6 @@ st,pins = "i2c_1_2_grp"; st,function = "i2c_1_2"; }; - pci { - st,pins = "pcie0_grp","pcie1_grp", - "pcie2_grp"; - st,function = "pci"; - }; smii { st,pins = "smii_0_1_2_grp"; st,function = "smii_0_1_2"; @@ -88,6 +91,14 @@ "nand_16bit_grp"; st,function = "nand"; }; + sata { + st,pins = "sata0_grp"; + st,function = "sata"; + }; + pcie { + st,pins = "pcie1_grp", "pcie2_grp"; + st,function = "pci_express"; + }; }; }; diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts index 045f7123ffac..1fc558424d96 100644 --- a/arch/arm/boot/dts/spear1340-evb.dts +++ b/arch/arm/boot/dts/spear1340-evb.dts @@ -38,20 +38,15 @@ st,pins = "fsmc_8bit_grp"; st,function = "fsmc"; }; - kbd { - st,pins = "keyboard_row_col_grp", - "keyboard_col5_grp"; - st,function = "keyboard"; - }; uart0 { - st,pins = "uart0_grp", "uart0_enh_grp"; + st,pins = "uart0_grp"; st,function = "uart0"; }; - i2c0-pmx { + i2c0 { st,pins = "i2c0_grp"; st,function = "i2c0"; }; - i2c1-pmx { + i2c1 { st,pins = "i2c1_grp"; st,function = "i2c1"; }; @@ -64,14 +59,9 @@ st,function = "spdif_out"; }; ssp0 { - st,pins = "ssp0_grp", "ssp0_cs1_grp", - "ssp0_cs3_grp"; + st,pins = "ssp0_grp", "ssp0_cs1_grp", "ssp0_cs2_grp", "ssp0_cs3_grp"; st,function = "ssp0"; }; - pwm { - st,pins = "pwm2_grp", "pwm3_grp"; - st,function = "pwm"; - }; smi-pmx { st,pins = "smi_grp"; st,function = "smi"; @@ -84,6 +74,18 @@ st,pins = "gmii_grp", "rgmii_grp"; st,function = "gmac"; }; + cam0 { + st,pins = "cam0_grp"; + st,function = "cam0"; + }; + cam1 { + st,pins = "cam1_grp"; + st,function = "cam1"; + }; + cam2 { + st,pins = "cam2_grp"; + st,function = "cam2"; + }; cam3 { st,pins = "cam3_grp"; st,function = "cam3"; @@ -108,6 +110,11 @@ st,pins = "sata_grp"; st,function = "sata"; }; + pcie { + st,pins = "pcie_grp"; + st,function = "pcie"; + }; + }; }; diff --git a/arch/arm/boot/dts/spear320-evb.dts b/arch/arm/boot/dts/spear320-evb.dts index ad4bfc68ee05..70c3498b16a4 100644 --- a/arch/arm/boot/dts/spear320-evb.dts +++ b/arch/arm/boot/dts/spear320-evb.dts @@ -76,13 +76,9 @@ st,function = "mii2"; }; pwm0_1 { - st,pins = "pwm0_1_pin_14_15_grp"; + st,pins = "pwm0_1_pin_37_38_grp"; st,function = "pwm0_1"; }; - pwm2 { - st,pins = "pwm2_pin_13_grp"; - st,function = "pwm2"; - }; }; }; From 482a8f3f53e9bc7a52ef54f6cd40bcf2c270e2f5 Mon Sep 17 00:00:00 2001 From: Vipin Kumar Date: Thu, 5 Jul 2012 11:51:47 +0800 Subject: [PATCH 03/14] ARM: SPEAr: DT: Update partition info for MTD devices This patch enhances partition information of MTD devices like fsmc-nand and spear-smi. Signed-off-by: Shiraz Hashim Signed-off-by: Vipin Kumar Signed-off-by: Vipul Kumar Samar Signed-off-by: Viresh Kumar --- arch/arm/boot/dts/spear1310-evb.dts | 43 +++++++++++++++++++++++++---- arch/arm/boot/dts/spear1340-evb.dts | 43 +++++++++++++++++++++++++---- arch/arm/boot/dts/spear300-evb.dts | 18 ++++++++---- arch/arm/boot/dts/spear310-evb.dts | 18 ++++++++---- arch/arm/boot/dts/spear320-evb.dts | 18 ++++++++---- arch/arm/boot/dts/spear600-evb.dts | 18 ++++++++---- 6 files changed, 128 insertions(+), 30 deletions(-) diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts index 3448d60117ec..010e21deb867 100644 --- a/arch/arm/boot/dts/spear1310-evb.dts +++ b/arch/arm/boot/dts/spear1310-evb.dts @@ -120,6 +120,31 @@ fsmc: flash@b0000000 { status = "okay"; + + partition@0 { + label = "xloader"; + reg = <0x0 0x80000>; + }; + partition@80000 { + label = "u-boot"; + reg = <0x80000 0x140000>; + }; + partition@1C0000 { + label = "environment"; + reg = <0x1C0000 0x40000>; + }; + partition@200000 { + label = "dtb"; + reg = <0x200000 0x40000>; + }; + partition@240000 { + label = "linux"; + reg = <0x240000 0xC00000>; + }; + partition@E40000 { + label = "rootfs"; + reg = <0xE40000 0x0>; + }; }; gmac0: eth@e2000000 { @@ -146,15 +171,23 @@ }; partition@10000 { label = "u-boot"; - reg = <0x10000 0x40000>; + reg = <0x10000 0x50000>; }; - partition@50000 { + partition@60000 { + label = "environment"; + reg = <0x60000 0x10000>; + }; + partition@70000 { + label = "dtb"; + reg = <0x70000 0x10000>; + }; + partition@80000 { label = "linux"; - reg = <0x50000 0x2c0000>; + reg = <0x80000 0x310000>; }; - partition@310000 { + partition@390000 { label = "rootfs"; - reg = <0x310000 0x4f0000>; + reg = <0x390000 0x0>; }; }; }; diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts index 1fc558424d96..b16f7569bf5b 100644 --- a/arch/arm/boot/dts/spear1340-evb.dts +++ b/arch/arm/boot/dts/spear1340-evb.dts @@ -128,6 +128,31 @@ fsmc: flash@b0000000 { status = "okay"; + + partition@0 { + label = "xloader"; + reg = <0x0 0x200000>; + }; + partition@200000 { + label = "u-boot"; + reg = <0x200000 0x200000>; + }; + partition@400000 { + label = "environment"; + reg = <0x400000 0x100000>; + }; + partition@500000 { + label = "dtb"; + reg = <0x500000 0x100000>; + }; + partition@600000 { + label = "linux"; + reg = <0x600000 0xC00000>; + }; + partition@1200000 { + label = "rootfs"; + reg = <0x1200000 0x0>; + }; }; gmac0: eth@e2000000 { @@ -154,15 +179,23 @@ }; partition@10000 { label = "u-boot"; - reg = <0x10000 0x40000>; + reg = <0x10000 0x50000>; }; - partition@50000 { + partition@60000 { + label = "environment"; + reg = <0x60000 0x10000>; + }; + partition@70000 { + label = "dtb"; + reg = <0x70000 0x10000>; + }; + partition@80000 { label = "linux"; - reg = <0x50000 0x2c0000>; + reg = <0x80000 0x310000>; }; - partition@310000 { + partition@390000 { label = "rootfs"; - reg = <0x310000 0x4f0000>; + reg = <0x390000 0x0>; }; }; }; diff --git a/arch/arm/boot/dts/spear300-evb.dts b/arch/arm/boot/dts/spear300-evb.dts index 1e7c7a8e2123..b3265f6f5958 100644 --- a/arch/arm/boot/dts/spear300-evb.dts +++ b/arch/arm/boot/dts/spear300-evb.dts @@ -100,15 +100,23 @@ }; partition@10000 { label = "u-boot"; - reg = <0x10000 0x40000>; + reg = <0x10000 0x50000>; }; - partition@50000 { + partition@60000 { + label = "environment"; + reg = <0x60000 0x10000>; + }; + partition@70000 { + label = "dtb"; + reg = <0x70000 0x10000>; + }; + partition@80000 { label = "linux"; - reg = <0x50000 0x2c0000>; + reg = <0x80000 0x310000>; }; - partition@310000 { + partition@390000 { label = "rootfs"; - reg = <0x310000 0x4f0000>; + reg = <0x390000 0x0>; }; }; }; diff --git a/arch/arm/boot/dts/spear310-evb.dts b/arch/arm/boot/dts/spear310-evb.dts index b00544e0cd5d..b30fa0e60010 100644 --- a/arch/arm/boot/dts/spear310-evb.dts +++ b/arch/arm/boot/dts/spear310-evb.dts @@ -114,15 +114,23 @@ }; partition@10000 { label = "u-boot"; - reg = <0x10000 0x40000>; + reg = <0x10000 0x50000>; }; - partition@50000 { + partition@60000 { + label = "environment"; + reg = <0x60000 0x10000>; + }; + partition@70000 { + label = "dtb"; + reg = <0x70000 0x10000>; + }; + partition@80000 { label = "linux"; - reg = <0x50000 0x2c0000>; + reg = <0x80000 0x310000>; }; - partition@310000 { + partition@390000 { label = "rootfs"; - reg = <0x310000 0x4f0000>; + reg = <0x390000 0x0>; }; }; }; diff --git a/arch/arm/boot/dts/spear320-evb.dts b/arch/arm/boot/dts/spear320-evb.dts index 70c3498b16a4..5b73d9c805d9 100644 --- a/arch/arm/boot/dts/spear320-evb.dts +++ b/arch/arm/boot/dts/spear320-evb.dts @@ -118,15 +118,23 @@ }; partition@10000 { label = "u-boot"; - reg = <0x10000 0x40000>; + reg = <0x10000 0x50000>; }; - partition@50000 { + partition@60000 { + label = "environment"; + reg = <0x60000 0x10000>; + }; + partition@70000 { + label = "dtb"; + reg = <0x70000 0x10000>; + }; + partition@80000 { label = "linux"; - reg = <0x50000 0x2c0000>; + reg = <0x80000 0x310000>; }; - partition@310000 { + partition@390000 { label = "rootfs"; - reg = <0x310000 0x4f0000>; + reg = <0x390000 0x0>; }; }; }; diff --git a/arch/arm/boot/dts/spear600-evb.dts b/arch/arm/boot/dts/spear600-evb.dts index 1119c22c9a82..16e4de46c7b8 100644 --- a/arch/arm/boot/dts/spear600-evb.dts +++ b/arch/arm/boot/dts/spear600-evb.dts @@ -49,15 +49,23 @@ }; partition@10000 { label = "u-boot"; - reg = <0x10000 0x40000>; + reg = <0x10000 0x50000>; }; - partition@50000 { + partition@60000 { + label = "environment"; + reg = <0x60000 0x10000>; + }; + partition@70000 { + label = "dtb"; + reg = <0x70000 0x10000>; + }; + partition@80000 { label = "linux"; - reg = <0x50000 0x2c0000>; + reg = <0x80000 0x310000>; }; - partition@310000 { + partition@390000 { label = "rootfs"; - reg = <0x310000 0x4f0000>; + reg = <0x390000 0x0>; }; }; }; From f631b984ee104bb3979cd26311abbcd4d23a715d Mon Sep 17 00:00:00 2001 From: Vipul Kumar Samar Date: Thu, 5 Jul 2012 11:51:47 +0800 Subject: [PATCH 04/14] ARM: SPEAr: DT: Fix existing DT support This patch fixes existing DT support for all SPEAr SoC's. This includes: - Removing few nodes from board files - Updating DT data of few nodes - Updating ranges of few busses - Moving devices to correct parent bus Signed-off-by: Bhavna Yadav Signed-off-by: Deepak Sikri Signed-off-by: Rajeev Kumar Signed-off-by: Shiraz Hashim Signed-off-by: Vijay Kumar Mishra Signed-off-by: Vipin Kumar Signed-off-by: Vipul Kumar Samar Signed-off-by: Viresh Kumar --- arch/arm/boot/dts/spear1310-evb.dts | 13 +++++------- arch/arm/boot/dts/spear1310.dtsi | 14 ++++++------ arch/arm/boot/dts/spear1340-evb.dts | 9 ++++---- arch/arm/boot/dts/spear1340.dtsi | 1 + arch/arm/boot/dts/spear13xx.dtsi | 33 +++++++++++++++++++---------- arch/arm/boot/dts/spear300.dtsi | 2 +- arch/arm/boot/dts/spear320-evb.dts | 5 +---- arch/arm/boot/dts/spear320.dtsi | 4 ++-- arch/arm/boot/dts/spear3xx.dtsi | 2 +- 9 files changed, 45 insertions(+), 38 deletions(-) diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts index 010e21deb867..668dcb27dafd 100644 --- a/arch/arm/boot/dts/spear1310-evb.dts +++ b/arch/arm/boot/dts/spear1310-evb.dts @@ -192,10 +192,6 @@ }; }; - spi0: spi@e0100000 { - status = "okay"; - }; - ehci@e4800000 { status = "okay"; }; @@ -233,10 +229,6 @@ status = "okay"; }; - i2c1: i2c@5cd00000 { - status = "okay"; - }; - kbd@e0300000 { linux,keymap = < 0x00000001 0x00010002 @@ -321,6 +313,7 @@ 0x08080052 >; autorepeat; st,mode = <0>; + suspended_rate = <2000000>; status = "okay"; }; @@ -332,6 +325,10 @@ status = "okay"; }; + spi0: spi@e0100000 { + status = "okay"; + }; + wdt@ec800620 { status = "okay"; }; diff --git a/arch/arm/boot/dts/spear1310.dtsi b/arch/arm/boot/dts/spear1310.dtsi index f489f648c6eb..b2479be75905 100644 --- a/arch/arm/boot/dts/spear1310.dtsi +++ b/arch/arm/boot/dts/spear1310.dtsi @@ -88,13 +88,6 @@ #gpio-range-cells = <2>; }; - spi1: spi@5d400000 { - compatible = "arm,pl022", "arm,primecell"; - reg = <0x5d400000 0x1000>; - interrupts = <0 99 0x4>; - status = "disabled"; - }; - apb { i2c1: i2c@5cd00000 { #address-cells = <1>; @@ -159,6 +152,13 @@ status = "disabled"; }; + spi1: spi@5d400000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x5d400000 0x1000>; + interrupts = <0 99 0x4>; + status = "disabled"; + }; + serial@5c800000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x5c800000 0x1000>; diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts index b16f7569bf5b..015601360f73 100644 --- a/arch/arm/boot/dts/spear1340-evb.dts +++ b/arch/arm/boot/dts/spear1340-evb.dts @@ -200,10 +200,6 @@ }; }; - spi0: spi@e0100000 { - status = "okay"; - }; - ehci@e4800000 { status = "okay"; }; @@ -329,6 +325,7 @@ 0x08080052 >; autorepeat; st,mode = <0>; + suspended_rate = <2000000>; status = "okay"; }; @@ -344,6 +341,10 @@ status = "okay"; }; + spi0: spi@e0100000 { + status = "okay"; + }; + wdt@ec800620 { status = "okay"; }; diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi index 64d14fde215d..c49781e196b6 100644 --- a/arch/arm/boot/dts/spear1340.dtsi +++ b/arch/arm/boot/dts/spear1340.dtsi @@ -58,6 +58,7 @@ compatible = "snps,designware-i2c"; reg = <0xb4000000 0x1000>; interrupts = <0 104 0x4>; + write-16bit; status = "disabled"; }; diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi index f7b84aced654..4d351442e581 100644 --- a/arch/arm/boot/dts/spear13xx.dtsi +++ b/arch/arm/boot/dts/spear13xx.dtsi @@ -70,6 +70,8 @@ compatible = "simple-bus"; ranges = <0x50000000 0x50000000 0x10000000 0xb0000000 0xb0000000 0x10000000 + 0xd0000000 0xd0000000 0x02000000 + 0xd8000000 0xd8000000 0x01000000 0xe0000000 0xe0000000 0x10000000>; sdhci@b3000000 { @@ -81,7 +83,7 @@ cf@b2800000 { compatible = "arasan,cf-spear1340"; - reg = <0xb2800000 0x100>; + reg = <0xb2800000 0x1000>; interrupts = <0 29 0x4>; status = "disabled"; }; @@ -113,6 +115,7 @@ 0 23 0x4>; st,ale-off = <0x20000>; st,cle-off = <0x10000>; + st,mode = <2>; status = "disabled"; }; @@ -134,17 +137,11 @@ status = "disabled"; }; - spi0: spi@e0100000 { - compatible = "arm,pl022", "arm,primecell"; - reg = <0xe0100000 0x1000>; - interrupts = <0 31 0x4>; - status = "disabled"; - }; - ehci@e4800000 { compatible = "st,spear600-ehci", "usb-ehci"; reg = <0xe4800000 0x1000>; interrupts = <0 64 0x4>; + usbh0_id = <0>; status = "disabled"; }; @@ -152,6 +149,7 @@ compatible = "st,spear600-ehci", "usb-ehci"; reg = <0xe5800000 0x1000>; interrupts = <0 66 0x4>; + usbh1_id = <1>; status = "disabled"; }; @@ -159,6 +157,7 @@ compatible = "st,spear600-ohci", "usb-ohci"; reg = <0xe4000000 0x1000>; interrupts = <0 65 0x4>; + usbh0_id = <0>; status = "disabled"; }; @@ -166,6 +165,7 @@ compatible = "st,spear600-ohci", "usb-ohci"; reg = <0xe5000000 0x1000>; interrupts = <0 67 0x4>; + usbh1_id = <1>; status = "disabled"; }; @@ -175,6 +175,8 @@ compatible = "simple-bus"; ranges = <0x50000000 0x50000000 0x10000000 0xb0000000 0xb0000000 0x10000000 + 0xd0000000 0xd0000000 0x02000000 + 0xd8000000 0xd8000000 0x01000000 0xe0000000 0xe0000000 0x10000000>; gpio0: gpio@e0600000 { @@ -215,8 +217,15 @@ status = "disabled"; }; + spi0: spi@e0100000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0xe0100000 0x1000>; + interrupts = <0 31 0x4>; + status = "disabled"; + }; + rtc@e0580000 { - compatible = "st,spear-rtc"; + compatible = "st,spear600-rtc"; reg = <0xe0580000 0x1000>; interrupts = <0 36 0x4>; status = "disabled"; @@ -232,7 +241,7 @@ adc@e0080000 { compatible = "st,spear600-adc"; reg = <0xe0080000 0x1000>; - interrupts = <0 44 0x4>; + interrupts = <0 12 0x4>; status = "disabled"; }; @@ -245,7 +254,8 @@ timer@ec800600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0xec800600 0x20>; - interrupts = <1 13 0x301>; + interrupts = <1 13 0x4>; + status = "disabled"; }; wdt@ec800620 { @@ -257,6 +267,7 @@ thermal@e07008c4 { compatible = "st,thermal-spear1340"; reg = <0xe07008c4 0x4>; + thermal_flags = <0x7000>; }; }; }; diff --git a/arch/arm/boot/dts/spear300.dtsi b/arch/arm/boot/dts/spear300.dtsi index ed3627c116cc..fdac8713367a 100644 --- a/arch/arm/boot/dts/spear300.dtsi +++ b/arch/arm/boot/dts/spear300.dtsi @@ -27,7 +27,7 @@ }; clcd@60000000 { - compatible = "arm,clcd-pl110", "arm,primecell"; + compatible = "arm,pl110", "arm,primecell"; reg = <0x60000000 0x1000>; interrupts = <30>; status = "disabled"; diff --git a/arch/arm/boot/dts/spear320-evb.dts b/arch/arm/boot/dts/spear320-evb.dts index 5b73d9c805d9..bf5848d9aa2b 100644 --- a/arch/arm/boot/dts/spear320-evb.dts +++ b/arch/arm/boot/dts/spear320-evb.dts @@ -82,10 +82,6 @@ }; }; - clcd@90000000 { - status = "okay"; - }; - dma@fc400000 { status = "okay"; }; @@ -99,6 +95,7 @@ }; sdhci@70000000 { + power-gpio = <&gpiopinctrl 61 1>; status = "okay"; }; diff --git a/arch/arm/boot/dts/spear320.dtsi b/arch/arm/boot/dts/spear320.dtsi index 67d7ada71275..da29afba54e6 100644 --- a/arch/arm/boot/dts/spear320.dtsi +++ b/arch/arm/boot/dts/spear320.dtsi @@ -28,7 +28,7 @@ }; clcd@90000000 { - compatible = "arm,clcd-pl110", "arm,primecell"; + compatible = "arm,pl110", "arm,primecell"; reg = <0x90000000 0x1000>; interrupts = <33>; status = "disabled"; @@ -69,7 +69,7 @@ #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; - ranges = <0xa0000000 0xa0000000 0x10000000 + ranges = <0xa0000000 0xa0000000 0x20000000 0xd0000000 0xd0000000 0x30000000>; i2c1: i2c@a7000000 { diff --git a/arch/arm/boot/dts/spear3xx.dtsi b/arch/arm/boot/dts/spear3xx.dtsi index 3a8bb5736928..b02721fed166 100644 --- a/arch/arm/boot/dts/spear3xx.dtsi +++ b/arch/arm/boot/dts/spear3xx.dtsi @@ -120,7 +120,7 @@ }; rtc@fc900000 { - compatible = "st,spear-rtc"; + compatible = "st,spear600-rtc"; reg = <0xfc900000 0x1000>; interrupts = <10>; status = "disabled"; From 4c7a078f9003f31862f3a194dfa6a2dcf0937b39 Mon Sep 17 00:00:00 2001 From: Deepak Sikri Date: Thu, 9 Aug 2012 13:18:40 +0530 Subject: [PATCH 05/14] ARM: SPEAr: DT: Modify DT bindings for STMMAC This patch modifies the DT bindings for the GMAC IP existings for the SPEAr family. The DT bindings now additionally pass the phy mode as a configuration parameter for the ethernet device. Signed-off-by: Deepak Sikri Signed-off-by: Viresh Kumar --- arch/arm/boot/dts/spear1310-evb.dts | 1 + arch/arm/boot/dts/spear1310.dtsi | 4 ++++ arch/arm/boot/dts/spear1340-evb.dts | 1 + arch/arm/boot/dts/spear3xx.dtsi | 1 + arch/arm/boot/dts/spear600.dtsi | 1 + 5 files changed, 8 insertions(+) diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts index 668dcb27dafd..72f467575743 100644 --- a/arch/arm/boot/dts/spear1310-evb.dts +++ b/arch/arm/boot/dts/spear1310-evb.dts @@ -148,6 +148,7 @@ }; gmac0: eth@e2000000 { + phy-mode = "gmii"; status = "okay"; }; diff --git a/arch/arm/boot/dts/spear1310.dtsi b/arch/arm/boot/dts/spear1310.dtsi index b2479be75905..e613452ec5bb 100644 --- a/arch/arm/boot/dts/spear1310.dtsi +++ b/arch/arm/boot/dts/spear1310.dtsi @@ -55,6 +55,7 @@ reg = <0x5c400000 0x8000>; interrupts = <0 95 0x4>; interrupt-names = "macirq"; + phy-mode = "mii"; status = "disabled"; }; @@ -63,6 +64,7 @@ reg = <0x5c500000 0x8000>; interrupts = <0 96 0x4>; interrupt-names = "macirq"; + phy-mode = "mii"; status = "disabled"; }; @@ -71,6 +73,7 @@ reg = <0x5c600000 0x8000>; interrupts = <0 97 0x4>; interrupt-names = "macirq"; + phy-mode = "rmii"; status = "disabled"; }; @@ -79,6 +82,7 @@ reg = <0x5c700000 0x8000>; interrupts = <0 98 0x4>; interrupt-names = "macirq"; + phy-mode = "rgmii"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts index 015601360f73..cfe82d126da3 100644 --- a/arch/arm/boot/dts/spear1340-evb.dts +++ b/arch/arm/boot/dts/spear1340-evb.dts @@ -156,6 +156,7 @@ }; gmac0: eth@e2000000 { + phy-mode = "rgmii"; status = "okay"; }; diff --git a/arch/arm/boot/dts/spear3xx.dtsi b/arch/arm/boot/dts/spear3xx.dtsi index b02721fed166..494636000f5c 100644 --- a/arch/arm/boot/dts/spear3xx.dtsi +++ b/arch/arm/boot/dts/spear3xx.dtsi @@ -53,6 +53,7 @@ reg = <0xe0800000 0x8000>; interrupts = <23 22>; interrupt-names = "macirq", "eth_wake_irq"; + phy-mode = "mii"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/spear600.dtsi b/arch/arm/boot/dts/spear600.dtsi index a3c36e47d7ef..f74feeaab1e0 100644 --- a/arch/arm/boot/dts/spear600.dtsi +++ b/arch/arm/boot/dts/spear600.dtsi @@ -59,6 +59,7 @@ interrupt-parent = <&vic1>; interrupts = <24 23>; interrupt-names = "macirq", "eth_wake_irq"; + phy-mode = "gmii"; status = "disabled"; }; From 7bceba83734dd4d50e978492959bd327f697fc23 Mon Sep 17 00:00:00 2001 From: Vipul Kumar Samar Date: Thu, 30 Aug 2012 09:32:24 +0530 Subject: [PATCH 06/14] ARM: SPEAr: DT: add uart state to fix warning amba-pl011 driver supports two pin state "default" and "sleep" and it expect from dt to provide this pinctrl states and phandler otherwise it gives a warning message. To remove this warning message pass default state with null phandler to uart pins in device node (In our case all the pins are configured in default states so we pass null phandler to pins). Signed-off-by: Vipul Kumar Samar Signed-off-by: Viresh Kumar --- arch/arm/boot/dts/spear1310-evb.dts | 2 ++ arch/arm/boot/dts/spear1340-evb.dts | 4 ++++ arch/arm/boot/dts/spear300-evb.dts | 2 ++ arch/arm/boot/dts/spear310-evb.dts | 12 ++++++++++++ arch/arm/boot/dts/spear320-evb.dts | 6 ++++++ arch/arm/boot/dts/spear600-evb.dts | 4 ++++ 6 files changed, 30 insertions(+) diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts index 72f467575743..8c97f34b99fb 100644 --- a/arch/arm/boot/dts/spear1310-evb.dts +++ b/arch/arm/boot/dts/spear1310-evb.dts @@ -324,6 +324,8 @@ serial@e0000000 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; }; spi0: spi@e0100000 { diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts index cfe82d126da3..05c25495804b 100644 --- a/arch/arm/boot/dts/spear1340-evb.dts +++ b/arch/arm/boot/dts/spear1340-evb.dts @@ -336,10 +336,14 @@ serial@e0000000 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; }; serial@b4100000 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; }; spi0: spi@e0100000 { diff --git a/arch/arm/boot/dts/spear300-evb.dts b/arch/arm/boot/dts/spear300-evb.dts index b3265f6f5958..5de1431653e4 100644 --- a/arch/arm/boot/dts/spear300-evb.dts +++ b/arch/arm/boot/dts/spear300-evb.dts @@ -243,6 +243,8 @@ serial@d0000000 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; }; wdt@fc880000 { diff --git a/arch/arm/boot/dts/spear310-evb.dts b/arch/arm/boot/dts/spear310-evb.dts index b30fa0e60010..b09632963d15 100644 --- a/arch/arm/boot/dts/spear310-evb.dts +++ b/arch/arm/boot/dts/spear310-evb.dts @@ -166,26 +166,38 @@ serial@d0000000 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; }; serial@b2000000 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; }; serial@b2080000 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; }; serial@b2100000 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; }; serial@b2180000 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; }; serial@b2200000 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; }; wdt@fc880000 { diff --git a/arch/arm/boot/dts/spear320-evb.dts b/arch/arm/boot/dts/spear320-evb.dts index bf5848d9aa2b..fdedbb514102 100644 --- a/arch/arm/boot/dts/spear320-evb.dts +++ b/arch/arm/boot/dts/spear320-evb.dts @@ -183,14 +183,20 @@ serial@d0000000 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; }; serial@a3000000 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; }; serial@a4000000 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; }; wdt@fc880000 { diff --git a/arch/arm/boot/dts/spear600-evb.dts b/arch/arm/boot/dts/spear600-evb.dts index 16e4de46c7b8..5e6ef03cd04e 100644 --- a/arch/arm/boot/dts/spear600-evb.dts +++ b/arch/arm/boot/dts/spear600-evb.dts @@ -73,10 +73,14 @@ apb { serial@d0000000 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; }; serial@d0080000 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; }; i2c@d0200000 { From 8113ba917dfa74ba51b176f9f528f3a217c0eea2 Mon Sep 17 00:00:00 2001 From: Shiraz Hashim Date: Sat, 10 Nov 2012 17:31:01 +0530 Subject: [PATCH 07/14] ARM: SPEAr: DT: Update device nodes This patch adds multiple device nodes for SPEAr machines and boards. Signed-off-by: Bhavna Yadav Signed-off-by: Deepak Sikri Signed-off-by: Rajeev Kumar Signed-off-by: Shiraz Hashim Signed-off-by: Vijay Kumar Mishra Signed-off-by: Vipin Kumar Signed-off-by: Vipul Kumar Samar Signed-off-by: Viresh Kumar --- arch/arm/boot/dts/spear1310-evb.dts | 83 ++++++++++++++ arch/arm/boot/dts/spear1310.dtsi | 2 + arch/arm/boot/dts/spear1340-evb.dts | 163 ++++++++++++++++++++++++++++ arch/arm/boot/dts/spear1340.dtsi | 46 ++++++++ arch/arm/boot/dts/spear13xx.dtsi | 39 +++++++ arch/arm/boot/dts/spear320.dtsi | 11 ++ arch/arm/boot/dts/spear3xx.dtsi | 2 + arch/arm/boot/dts/spear600-evb.dts | 24 ++++ arch/arm/boot/dts/spear600.dtsi | 15 +++ 9 files changed, 385 insertions(+) diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts index 8c97f34b99fb..b56a801e42a2 100644 --- a/arch/arm/boot/dts/spear1310-evb.dts +++ b/arch/arm/boot/dts/spear1310-evb.dts @@ -147,6 +147,20 @@ }; }; + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + label = "wakeup"; + linux,code = <0x100>; + gpios = <&gpio0 7 0x4>; + debounce-interval = <20>; + gpio-key,wakeup = <1>; + }; + }; + gmac0: eth@e2000000 { phy-mode = "gmii"; status = "okay"; @@ -330,6 +344,75 @@ spi0: spi@e0100000 { status = "okay"; + num-cs = <3>; + cs-gpios = <&gpio1 7 0>, <&spics 0>, <&spics 1>; + + stmpe610@0 { + compatible = "st,stmpe610"; + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + spi-max-frequency = <1000000>; + spi-cpha; + pl022,hierarchy = <0>; + pl022,interface = <0>; + pl022,slave-tx-disable; + pl022,com-mode = <0>; + pl022,rx-level-trig = <0>; + pl022,tx-level-trig = <0>; + pl022,ctrl-len = <0x7>; + pl022,wait-state = <0>; + pl022,duplex = <0>; + interrupts = <6 0x4>; + interrupt-parent = <&gpio1>; + irq-trigger = <0x2>; + + stmpe_touchscreen { + compatible = "st,stmpe-ts"; + ts,sample-time = <4>; + ts,mod-12b = <1>; + ts,ref-sel = <0>; + ts,adc-freq = <1>; + ts,ave-ctrl = <1>; + ts,touch-det-delay = <2>; + ts,settling = <2>; + ts,fraction-z = <7>; + ts,i-drive = <1>; + }; + }; + + m25p80@1 { + compatible = "st,m25p80"; + reg = <1>; + spi-max-frequency = <12000000>; + spi-cpol; + spi-cpha; + pl022,hierarchy = <0>; + pl022,interface = <0>; + pl022,slave-tx-disable; + pl022,com-mode = <0x2>; + pl022,rx-level-trig = <0>; + pl022,tx-level-trig = <0>; + pl022,ctrl-len = <0x11>; + pl022,wait-state = <0>; + pl022,duplex = <0>; + }; + + spidev@2 { + compatible = "spidev"; + reg = <2>; + spi-max-frequency = <25000000>; + spi-cpha; + pl022,hierarchy = <0>; + pl022,interface = <0>; + pl022,slave-tx-disable; + pl022,com-mode = <0x2>; + pl022,rx-level-trig = <0>; + pl022,tx-level-trig = <0>; + pl022,ctrl-len = <0x11>; + pl022,wait-state = <0>; + pl022,duplex = <0>; + }; }; wdt@ec800620 { diff --git a/arch/arm/boot/dts/spear1310.dtsi b/arch/arm/boot/dts/spear1310.dtsi index e613452ec5bb..1513c1927cc8 100644 --- a/arch/arm/boot/dts/spear1310.dtsi +++ b/arch/arm/boot/dts/spear1310.dtsi @@ -160,6 +160,8 @@ compatible = "arm,pl022", "arm,primecell"; reg = <0x5d400000 0x1000>; interrupts = <0 99 0x4>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts index 05c25495804b..d6c30ae0a8d7 100644 --- a/arch/arm/boot/dts/spear1340-evb.dts +++ b/arch/arm/boot/dts/spear1340-evb.dts @@ -118,6 +118,10 @@ }; }; + ahci@b1000000 { + status = "okay"; + }; + dma@ea800000 { status = "okay"; }; @@ -205,10 +209,37 @@ status = "okay"; }; + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + label = "wakeup"; + linux,code = <0x100>; + gpios = <&gpio1 1 0x4>; + debounce-interval = <20>; + gpio-key,wakeup = <1>; + }; + }; + ehci@e5800000 { status = "okay"; }; + i2s0: i2s-play@b2400000 { + status = "okay"; + }; + + i2s1: i2s-rec@b2000000 { + status = "okay"; + }; + + incodec: dir-hifi { + compatible = "dummy,dir-hifi"; + status = "okay"; + }; + ohci@e4000000 { status = "okay"; }; @@ -217,11 +248,43 @@ status = "okay"; }; + outcodec: dit-hifi { + compatible = "dummy,dit-hifi"; + status = "okay"; + }; + + sound { + compatible = "spear,spear-evb"; + audio-controllers = <&spdif0 &spdif1 &i2s0 &i2s1>; + audio-codecs = <&incodec &outcodec &sta529 &sta529>; + codec_dai_name = "dir-hifi", "dit-hifi", "sta529-audio", "sta529-audio"; + stream_name = "spdif-cap", "spdif-play", "i2s-play", "i2s-cap"; + dai_name = "spdifin-pcm", "spdifout-pcm", "i2s0-pcm", "i2s1-pcm"; + nr_controllers = <4>; + status = "okay"; + }; + + spdif0: spdif-in@d0100000 { + status = "okay"; + }; + + spdif1: spdif-out@d0000000 { + status = "okay"; + }; + apb { adc@e0080000 { status = "okay"; }; + i2s-play@b2400000 { + status = "okay"; + }; + + i2s-rec@b2000000 { + status = "okay"; + }; + gpio0: gpio@e0600000 { status = "okay"; }; @@ -236,10 +299,36 @@ i2c0: i2c@e0280000 { status = "okay"; + + sta529: sta529@1a { + compatible = "st,sta529"; + reg = <0x1a>; + }; }; i2c1: i2c@b4000000 { status = "okay"; + + eeprom0@56 { + compatible = "st,eeprom"; + reg = <0x56>; + }; + + stmpe801@41 { + compatible = "st,stmpe801"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x41>; + interrupts = <4 0x4>; + interrupt-parent = <&gpio0>; + irq-trigger = <0x2>; + + stmpegpio: stmpe_gpio { + compatible = "st,stmpe-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + }; }; kbd@e0300000 { @@ -348,6 +437,80 @@ spi0: spi@e0100000 { status = "okay"; + num-cs = <3>; + cs-gpios = <&gpiopinctrl 80 0>, <&gpiopinctrl 24 0>, + <&gpiopinctrl 85 0>; + + m25p80@0 { + compatible = "m25p80"; + reg = <0>; + spi-max-frequency = <12000000>; + spi-cpol; + spi-cpha; + pl022,hierarchy = <0>; + pl022,interface = <0>; + pl022,slave-tx-disable; + pl022,com-mode = <0x2>; + pl022,rx-level-trig = <0>; + pl022,tx-level-trig = <0>; + pl022,ctrl-len = <0x11>; + pl022,wait-state = <0>; + pl022,duplex = <0>; + }; + + stmpe610@1 { + compatible = "st,stmpe610"; + spi-max-frequency = <1000000>; + spi-cpha; + reg = <1>; + pl022,hierarchy = <0>; + pl022,interface = <0>; + pl022,slave-tx-disable; + pl022,com-mode = <0>; + pl022,rx-level-trig = <0>; + pl022,tx-level-trig = <0>; + pl022,ctrl-len = <0x7>; + pl022,wait-state = <0>; + pl022,duplex = <0>; + interrupts = <100 0>; + interrupt-parent = <&gpiopinctrl>; + irq-trigger = <0x2>; + #address-cells = <1>; + #size-cells = <0>; + + stmpe_touchscreen { + compatible = "st,stmpe-ts"; + ts,sample-time = <4>; + ts,mod-12b = <1>; + ts,ref-sel = <0>; + ts,adc-freq = <1>; + ts,ave-ctrl = <1>; + ts,touch-det-delay = <2>; + ts,settling = <2>; + ts,fraction-z = <7>; + ts,i-drive = <1>; + }; + }; + + spidev@2 { + compatible = "spidev"; + reg = <2>; + spi-max-frequency = <25000000>; + spi-cpha; + pl022,hierarchy = <0>; + pl022,interface = <0>; + pl022,slave-tx-disable; + pl022,com-mode = <0x2>; + pl022,rx-level-trig = <0>; + pl022,tx-level-trig = <0>; + pl022,ctrl-len = <0x11>; + pl022,wait-state = <0>; + pl022,duplex = <0>; + }; + }; + + timer@ec800600 { + status = "okay"; }; wdt@ec800620 { diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi index c49781e196b6..34da11aa6795 100644 --- a/arch/arm/boot/dts/spear1340.dtsi +++ b/arch/arm/boot/dts/spear1340.dtsi @@ -38,15 +38,61 @@ status = "disabled"; }; + i2s-play@b2400000 { + compatible = "snps,designware-i2s"; + reg = <0xb2400000 0x10000>; + interrupt-names = "play_irq"; + interrupts = <0 98 0x4 + 0 99 0x4>; + play; + channel = <8>; + status = "disabled"; + }; + + i2s-rec@b2000000 { + compatible = "snps,designware-i2s"; + reg = <0xb2000000 0x10000>; + interrupt-names = "record_irq"; + interrupts = <0 100 0x4 + 0 101 0x4>; + record; + channel = <8>; + status = "disabled"; + }; + pinmux: pinmux@e0700000 { compatible = "st,spear1340-pinmux"; reg = <0xe0700000 0x1000>; #gpio-range-cells = <2>; }; + pwm: pwm@e0180000 { + compatible ="st,spear13xx-pwm"; + reg = <0xe0180000 0x1000>; + #pwm-cells = <2>; + status = "disabled"; + }; + + spdif-in@d0100000 { + compatible = "st,spdif-in"; + reg = < 0xd0100000 0x20000 + 0xd0110000 0x10000 >; + interrupts = <0 84 0x4>; + status = "disabled"; + }; + + spdif-out@d0000000 { + compatible = "st,spdif-out"; + reg = <0xd0000000 0x20000>; + interrupts = <0 85 0x4>; + status = "disabled"; + }; + spi1: spi@5d400000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x5d400000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <0 99 0x4>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi index 4d351442e581..009096d1d2c3 100644 --- a/arch/arm/boot/dts/spear13xx.dtsi +++ b/arch/arm/boot/dts/spear13xx.dtsi @@ -64,6 +64,18 @@ bootargs = "console=ttyAMA0,115200"; }; + cpufreq { + compatible = "st,cpufreq-spear"; + cpufreq_tbl = < 166000 + 200000 + 250000 + 300000 + 400000 + 500000 + 600000 >; + status = "disable"; + }; + ahb { #address-cells = <1>; #size-cells = <1>; @@ -128,6 +140,13 @@ status = "disabled"; }; + pcm { + compatible = "st,pcm-audio"; + #address-cells = <0>; + #size-cells = <0>; + status = "disable"; + }; + smi: flash@ea000000 { compatible = "st,spear600-smi"; #address-cells = <1>; @@ -217,9 +236,29 @@ status = "disabled"; }; + i2s@e0180000 { + compatible = "st,designware-i2s"; + reg = <0xe0180000 0x1000>; + interrupt-names = "play_irq", "record_irq"; + interrupts = <0 10 0x4 + 0 11 0x4 >; + status = "disabled"; + }; + + i2s@e0200000 { + compatible = "st,designware-i2s"; + reg = <0xe0200000 0x1000>; + interrupt-names = "play_irq", "record_irq"; + interrupts = <0 26 0x4 + 0 53 0x4>; + status = "disabled"; + }; + spi0: spi@e0100000 { compatible = "arm,pl022", "arm,primecell"; reg = <0xe0100000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <0 31 0x4>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/spear320.dtsi b/arch/arm/boot/dts/spear320.dtsi index da29afba54e6..6ff0d1e0e461 100644 --- a/arch/arm/boot/dts/spear320.dtsi +++ b/arch/arm/boot/dts/spear320.dtsi @@ -56,15 +56,26 @@ spi1: spi@a5000000 { compatible = "arm,pl022", "arm,primecell"; reg = <0xa5000000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; spi2: spi@a6000000 { compatible = "arm,pl022", "arm,primecell"; reg = <0xa6000000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; + pwm: pwm@a8000000 { + compatible ="st,spear-pwm"; + reg = <0xa8000000 0x1000>; + #pwm-cells = <2>; + status = "disabled"; + }; + apb { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/spear3xx.dtsi b/arch/arm/boot/dts/spear3xx.dtsi index 494636000f5c..c2a852d43c48 100644 --- a/arch/arm/boot/dts/spear3xx.dtsi +++ b/arch/arm/boot/dts/spear3xx.dtsi @@ -70,6 +70,8 @@ compatible = "arm,pl022", "arm,primecell"; reg = <0xd0100000 0x1000>; interrupts = <20>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/spear600-evb.dts b/arch/arm/boot/dts/spear600-evb.dts index 5e6ef03cd04e..d865a891776d 100644 --- a/arch/arm/boot/dts/spear600-evb.dts +++ b/arch/arm/boot/dts/spear600-evb.dts @@ -24,15 +24,35 @@ }; ahb { + clcd@fc200000 { + status = "okay"; + }; + dma@fc400000 { status = "okay"; }; + ehci@e1800000 { + status = "okay"; + }; + + ehci@e2000000 { + status = "okay"; + }; + gmac: ethernet@e0800000 { phy-mode = "gmii"; status = "okay"; }; + ohci@e1900000 { + status = "okay"; + }; + + ohci@e2100000 { + status = "okay"; + }; + smi: flash@fc000000 { status = "okay"; clock-rate=<50000000>; @@ -83,6 +103,10 @@ pinctrl-0 = <>; }; + rtc@fc900000 { + status = "okay"; + }; + i2c@d0200000 { clock-frequency = <400000>; status = "okay"; diff --git a/arch/arm/boot/dts/spear600.dtsi b/arch/arm/boot/dts/spear600.dtsi index f74feeaab1e0..e051dde5181f 100644 --- a/arch/arm/boot/dts/spear600.dtsi +++ b/arch/arm/boot/dts/spear600.dtsi @@ -45,6 +45,14 @@ #interrupt-cells = <1>; }; + clcd@fc200000 { + compatible = "arm,pl110", "arm,primecell"; + reg = <0xfc200000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <12>; + status = "disabled"; + }; + dma@fc400000 { compatible = "arm,pl080", "arm,primecell"; reg = <0xfc400000 0x1000>; @@ -179,6 +187,13 @@ status = "disabled"; }; + rtc@fc900000 { + compatible = "st,spear600-rtc"; + reg = <0xfc900000 0x1000>; + interrupts = <10>; + status = "disabled"; + }; + timer@f0000000 { compatible = "st,spear-timer"; reg = <0xf0000000 0x400>; From 07e812a0aeaaf21a23b3db5048a65c7042248321 Mon Sep 17 00:00:00 2001 From: Vipul Kumar Samar Date: Wed, 17 Oct 2012 12:08:26 +0530 Subject: [PATCH 08/14] ARM: SPEAr1310: Move 1310 specific misc register into machine specific files This patch moves some global macro definitions to the files where they are used. Its a step towards removing spear.h completely later on. Signed-off-by: Vipul Kumar Samar Signed-off-by: Viresh Kumar --- arch/arm/mach-spear13xx/include/mach/spear.h | 8 -------- arch/arm/mach-spear13xx/spear1310.c | 5 +++++ drivers/clk/spear/spear1310_clock.c | 1 + 3 files changed, 6 insertions(+), 8 deletions(-) diff --git a/arch/arm/mach-spear13xx/include/mach/spear.h b/arch/arm/mach-spear13xx/include/mach/spear.h index 07d90acc92c8..7cfa6818865a 100644 --- a/arch/arm/mach-spear13xx/include/mach/spear.h +++ b/arch/arm/mach-spear13xx/include/mach/spear.h @@ -47,14 +47,6 @@ #define DMAC1_BASE UL(0xEB000000) #define MCIF_CF_BASE UL(0xB2800000) -/* Devices present in SPEAr1310 */ -#ifdef CONFIG_MACH_SPEAR1310 -#define SPEAR1310_RAS_GRP1_BASE UL(0xD8000000) -#define VA_SPEAR1310_RAS_GRP1_BASE UL(0xFA000000) -#define SPEAR1310_RAS_BASE UL(0xD8400000) -#define VA_SPEAR1310_RAS_BASE IOMEM(UL(0xFA400000)) -#endif /* CONFIG_MACH_SPEAR1310 */ - /* Debug uart for linux, will be used for debug and uncompress messages */ #define SPEAR_DBG_UART_BASE UART_BASE #define VA_SPEAR_DBG_UART_BASE VA_UART_BASE diff --git a/arch/arm/mach-spear13xx/spear1310.c b/arch/arm/mach-spear13xx/spear1310.c index 9fbbfc5650aa..593a756dc7f7 100644 --- a/arch/arm/mach-spear13xx/spear1310.c +++ b/arch/arm/mach-spear13xx/spear1310.c @@ -27,6 +27,11 @@ #define SPEAR1310_SATA1_BASE UL(0xB1800000) #define SPEAR1310_SATA2_BASE UL(0xB4000000) +#define SPEAR1310_RAS_GRP1_BASE UL(0xD8000000) +#define VA_SPEAR1310_RAS_GRP1_BASE UL(0xFA000000) +#define SPEAR1310_RAS_BASE UL(0xD8400000) +#define VA_SPEAR1310_RAS_BASE IOMEM(UL(0xFA400000)) + /* ssp device registration */ static struct pl022_ssp_controller ssp1_plat_data = { .bus_id = 0, diff --git a/drivers/clk/spear/spear1310_clock.c b/drivers/clk/spear/spear1310_clock.c index 0fcec2aae19c..cf7e17685a2c 100644 --- a/drivers/clk/spear/spear1310_clock.c +++ b/drivers/clk/spear/spear1310_clock.c @@ -20,6 +20,7 @@ #include #include "clk.h" +#define VA_SPEAR1310_RAS_BASE IOMEM(UL(0xFA400000)) /* PLL related registers and bit values */ #define SPEAR1310_PLL_CFG (VA_MISC_BASE + 0x210) /* PLL_CFG bit values */ From 3e270ba6e9158f0958e46a606cbeb14ddaf6979b Mon Sep 17 00:00:00 2001 From: Shiraz Hashim Date: Wed, 29 Aug 2012 21:57:36 +0530 Subject: [PATCH 09/14] ARM: SPEAr13xx: Remove fields not required for ssp controller Few fields are not required to be programmed in platform data of spi controller now, as it comes via DT. Remove them. Signed-off-by: Shiraz Hashim Signed-off-by: Viresh Kumar --- arch/arm/mach-spear13xx/spear1310.c | 2 -- arch/arm/mach-spear13xx/spear13xx.c | 2 -- 2 files changed, 4 deletions(-) diff --git a/arch/arm/mach-spear13xx/spear1310.c b/arch/arm/mach-spear13xx/spear1310.c index 593a756dc7f7..451f3b1867b0 100644 --- a/arch/arm/mach-spear13xx/spear1310.c +++ b/arch/arm/mach-spear13xx/spear1310.c @@ -34,9 +34,7 @@ /* ssp device registration */ static struct pl022_ssp_controller ssp1_plat_data = { - .bus_id = 0, .enable_dma = 0, - .num_chipselect = 3, }; /* Add SPEAr1310 auxdata to pass platform data */ diff --git a/arch/arm/mach-spear13xx/spear13xx.c b/arch/arm/mach-spear13xx/spear13xx.c index 5633d698f1e1..c4af775a8451 100644 --- a/arch/arm/mach-spear13xx/spear13xx.c +++ b/arch/arm/mach-spear13xx/spear13xx.c @@ -57,12 +57,10 @@ static struct dw_dma_slave ssp_dma_param[] = { }; struct pl022_ssp_controller pl022_plat_data = { - .bus_id = 0, .enable_dma = 1, .dma_filter = dw_dma_filter, .dma_rx_param = &ssp_dma_param[1], .dma_tx_param = &ssp_dma_param[0], - .num_chipselect = 3, }; /* CF device registration */ From 300a6856324a56955ab909e1dca93dabb8464c8a Mon Sep 17 00:00:00 2001 From: Vipul Kumar Samar Date: Mon, 15 Oct 2012 17:55:58 +0530 Subject: [PATCH 10/14] ARM: SPEAr1310: Fix AUXDATA for compact flash controller This patch fixes the platform data for compact flash controller. Signed-off-by: Vipul Kumar Samar Signed-off-by: Viresh Kumar --- arch/arm/mach-spear13xx/spear1310.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-spear13xx/spear1310.c b/arch/arm/mach-spear13xx/spear1310.c index 451f3b1867b0..02f4724bb0d4 100644 --- a/arch/arm/mach-spear13xx/spear1310.c +++ b/arch/arm/mach-spear13xx/spear1310.c @@ -15,6 +15,7 @@ #include #include +#include #include #include #include @@ -32,6 +33,12 @@ #define SPEAR1310_RAS_BASE UL(0xD8400000) #define VA_SPEAR1310_RAS_BASE IOMEM(UL(0xFA400000)) +static struct arasan_cf_pdata cf_pdata = { + .cf_if_clk = CF_IF_CLK_166M, + .quirk = CF_BROKEN_UDMA, + .dma_priv = &cf_dma_priv, +}; + /* ssp device registration */ static struct pl022_ssp_controller ssp1_plat_data = { .enable_dma = 0, @@ -39,7 +46,7 @@ static struct pl022_ssp_controller ssp1_plat_data = { /* Add SPEAr1310 auxdata to pass platform data */ static struct of_dev_auxdata spear1310_auxdata_lookup[] __initdata = { - OF_DEV_AUXDATA("arasan,cf-spear1340", MCIF_CF_BASE, NULL, &cf_dma_priv), + OF_DEV_AUXDATA("arasan,cf-spear1340", MCIF_CF_BASE, NULL, &cf_pdata), OF_DEV_AUXDATA("snps,dma-spear1340", DMAC0_BASE, NULL, &dmac_plat_data), OF_DEV_AUXDATA("snps,dma-spear1340", DMAC1_BASE, NULL, &dmac_plat_data), OF_DEV_AUXDATA("arm,pl022", SSP_BASE, NULL, &pl022_plat_data), From 80515a5a2e3c35e2994105f19af27650e8a16c51 Mon Sep 17 00:00:00 2001 From: Shiraz Hashim Date: Fri, 3 Aug 2012 15:33:10 +0530 Subject: [PATCH 11/14] ARM: SPEAr3xx: shirq: simplify and move the shared irq multiplexor to DT SPEAr3xx architecture includes shared/multiplexed irqs for certain set of devices. The multiplexor provides a single interrupt to parent interrupt controller (VIC) on behalf of a group of devices. There can be multiple groups available on SPEAr3xx variants but not exceeding 4. The number of devices in a group can differ, further they may share same set of status/mask registers spanning across different bit masks. Also in some cases the group may not have enable or other registers. This makes software little complex. Present implementation was non-DT and had few complex data structures to decipher banks, number of irqs supported, mask and registers involved. This patch simplifies the overall design and convert it in to DT. It also removes all registration from individual SoC files and bring them in to common shirq.c. Also updated the corresponding documentation for DT binding of shirq. Signed-off-by: Shiraz Hashim Signed-off-by: Viresh Kumar --- .../devicetree/bindings/arm/spear/shirq.txt | 48 +++ arch/arm/mach-spear3xx/include/mach/irqs.h | 10 +- arch/arm/mach-spear3xx/spear300.c | 103 ------ arch/arm/mach-spear3xx/spear310.c | 202 ------------ arch/arm/mach-spear3xx/spear320.c | 204 ------------ arch/arm/mach-spear3xx/spear3xx.c | 4 + arch/arm/plat-spear/include/plat/shirq.h | 39 +-- arch/arm/plat-spear/shirq.c | 299 +++++++++++++++--- 8 files changed, 317 insertions(+), 592 deletions(-) create mode 100644 Documentation/devicetree/bindings/arm/spear/shirq.txt diff --git a/Documentation/devicetree/bindings/arm/spear/shirq.txt b/Documentation/devicetree/bindings/arm/spear/shirq.txt new file mode 100644 index 000000000000..13fbb8866bd6 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/spear/shirq.txt @@ -0,0 +1,48 @@ +* SPEAr Shared IRQ layer (shirq) + +SPEAr3xx architecture includes shared/multiplexed irqs for certain set +of devices. The multiplexor provides a single interrupt to parent +interrupt controller (VIC) on behalf of a group of devices. + +There can be multiple groups available on SPEAr3xx variants but not +exceeding 4. The number of devices in a group can differ, further they +may share same set of status/mask registers spanning across different +bit masks. Also in some cases the group may not have enable or other +registers. This makes software little complex. + +A single node in the device tree is used to describe the shared +interrupt multiplexor (one node for all groups). A group in the +interrupt controller shares config/control registers with other groups. +For example, a 32-bit interrupt enable/disable config register can +accommodate upto 4 interrupt groups. + +Required properties: + - compatible: should be, either of + - "st,spear300-shirq" + - "st,spear310-shirq" + - "st,spear320-shirq" + - interrupt-controller: Identifies the node as an interrupt controller. + - #interrupt-cells: should be <1> which basically contains the offset + (starting from 0) of interrupts for all the groups. + - reg: Base address and size of shirq registers. + - interrupts: The list of interrupts generated by the groups which are + then connected to a parent interrupt controller. Each group is + associated with one of the interrupts, hence number of interrupts (to + parent) is equal to number of groups. The format of the interrupt + specifier depends in the interrupt parent controller. + + Optional properties: + - interrupt-parent: pHandle of the parent interrupt controller, if not + inherited from the parent node. + +Example: + +The following is an example from the SPEAr320 SoC dtsi file. + +shirq: interrupt-controller@0xb3000000 { + compatible = "st,spear320-shirq"; + reg = <0xb3000000 0x1000>; + interrupts = <28 29 30 1>; + #interrupt-cells = <1>; + interrupt-controller; +}; diff --git a/arch/arm/mach-spear3xx/include/mach/irqs.h b/arch/arm/mach-spear3xx/include/mach/irqs.h index 803de76f5f36..f95e5b2b6686 100644 --- a/arch/arm/mach-spear3xx/include/mach/irqs.h +++ b/arch/arm/mach-spear3xx/include/mach/irqs.h @@ -14,14 +14,6 @@ #ifndef __MACH_IRQS_H #define __MACH_IRQS_H -/* FIXME: probe all these from DT */ -#define SPEAR3XX_IRQ_INTRCOMM_RAS_ARM 1 -#define SPEAR3XX_IRQ_GEN_RAS_1 28 -#define SPEAR3XX_IRQ_GEN_RAS_2 29 -#define SPEAR3XX_IRQ_GEN_RAS_3 30 -#define SPEAR3XX_IRQ_VIC_END 32 -#define SPEAR3XX_VIRQ_START SPEAR3XX_IRQ_VIC_END - -#define NR_IRQS 160 +#define NR_IRQS 256 #endif /* __MACH_IRQS_H */ diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c index 6ec300549960..a69cbfdb07ee 100644 --- a/arch/arm/mach-spear3xx/spear300.c +++ b/arch/arm/mach-spear3xx/spear300.c @@ -17,102 +17,9 @@ #include #include #include -#include #include #include -/* Base address of various IPs */ -#define SPEAR300_TELECOM_BASE UL(0x50000000) - -/* Interrupt registers offsets and masks */ -#define SPEAR300_INT_ENB_MASK_REG 0x54 -#define SPEAR300_INT_STS_MASK_REG 0x58 -#define SPEAR300_IT_PERS_S_IRQ_MASK (1 << 0) -#define SPEAR300_IT_CHANGE_S_IRQ_MASK (1 << 1) -#define SPEAR300_I2S_IRQ_MASK (1 << 2) -#define SPEAR300_TDM_IRQ_MASK (1 << 3) -#define SPEAR300_CAMERA_L_IRQ_MASK (1 << 4) -#define SPEAR300_CAMERA_F_IRQ_MASK (1 << 5) -#define SPEAR300_CAMERA_V_IRQ_MASK (1 << 6) -#define SPEAR300_KEYBOARD_IRQ_MASK (1 << 7) -#define SPEAR300_GPIO1_IRQ_MASK (1 << 8) - -#define SPEAR300_SHIRQ_RAS1_MASK 0x1FF - -#define SPEAR300_SOC_CONFIG_BASE UL(0x99000000) - - -/* SPEAr300 Virtual irq definitions */ -/* IRQs sharing IRQ_GEN_RAS_1 */ -#define SPEAR300_VIRQ_IT_PERS_S (SPEAR3XX_VIRQ_START + 0) -#define SPEAR300_VIRQ_IT_CHANGE_S (SPEAR3XX_VIRQ_START + 1) -#define SPEAR300_VIRQ_I2S (SPEAR3XX_VIRQ_START + 2) -#define SPEAR300_VIRQ_TDM (SPEAR3XX_VIRQ_START + 3) -#define SPEAR300_VIRQ_CAMERA_L (SPEAR3XX_VIRQ_START + 4) -#define SPEAR300_VIRQ_CAMERA_F (SPEAR3XX_VIRQ_START + 5) -#define SPEAR300_VIRQ_CAMERA_V (SPEAR3XX_VIRQ_START + 6) -#define SPEAR300_VIRQ_KEYBOARD (SPEAR3XX_VIRQ_START + 7) -#define SPEAR300_VIRQ_GPIO1 (SPEAR3XX_VIRQ_START + 8) - -/* IRQs sharing IRQ_GEN_RAS_3 */ -#define SPEAR300_IRQ_CLCD SPEAR3XX_IRQ_GEN_RAS_3 - -/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */ -#define SPEAR300_IRQ_SDHCI SPEAR3XX_IRQ_INTRCOMM_RAS_ARM - -/* spear3xx shared irq */ -static struct shirq_dev_config shirq_ras1_config[] = { - { - .virq = SPEAR300_VIRQ_IT_PERS_S, - .enb_mask = SPEAR300_IT_PERS_S_IRQ_MASK, - .status_mask = SPEAR300_IT_PERS_S_IRQ_MASK, - }, { - .virq = SPEAR300_VIRQ_IT_CHANGE_S, - .enb_mask = SPEAR300_IT_CHANGE_S_IRQ_MASK, - .status_mask = SPEAR300_IT_CHANGE_S_IRQ_MASK, - }, { - .virq = SPEAR300_VIRQ_I2S, - .enb_mask = SPEAR300_I2S_IRQ_MASK, - .status_mask = SPEAR300_I2S_IRQ_MASK, - }, { - .virq = SPEAR300_VIRQ_TDM, - .enb_mask = SPEAR300_TDM_IRQ_MASK, - .status_mask = SPEAR300_TDM_IRQ_MASK, - }, { - .virq = SPEAR300_VIRQ_CAMERA_L, - .enb_mask = SPEAR300_CAMERA_L_IRQ_MASK, - .status_mask = SPEAR300_CAMERA_L_IRQ_MASK, - }, { - .virq = SPEAR300_VIRQ_CAMERA_F, - .enb_mask = SPEAR300_CAMERA_F_IRQ_MASK, - .status_mask = SPEAR300_CAMERA_F_IRQ_MASK, - }, { - .virq = SPEAR300_VIRQ_CAMERA_V, - .enb_mask = SPEAR300_CAMERA_V_IRQ_MASK, - .status_mask = SPEAR300_CAMERA_V_IRQ_MASK, - }, { - .virq = SPEAR300_VIRQ_KEYBOARD, - .enb_mask = SPEAR300_KEYBOARD_IRQ_MASK, - .status_mask = SPEAR300_KEYBOARD_IRQ_MASK, - }, { - .virq = SPEAR300_VIRQ_GPIO1, - .enb_mask = SPEAR300_GPIO1_IRQ_MASK, - .status_mask = SPEAR300_GPIO1_IRQ_MASK, - }, -}; - -static struct spear_shirq shirq_ras1 = { - .irq = SPEAR3XX_IRQ_GEN_RAS_1, - .dev_config = shirq_ras1_config, - .dev_count = ARRAY_SIZE(shirq_ras1_config), - .regs = { - .enb_reg = SPEAR300_INT_ENB_MASK_REG, - .status_reg = SPEAR300_INT_STS_MASK_REG, - .status_reg_mask = SPEAR300_SHIRQ_RAS1_MASK, - .clear_reg = -1, - }, -}; - /* DMAC platform data's slave info */ struct pl08x_channel_data spear300_dma_info[] = { { @@ -285,21 +192,11 @@ static struct of_dev_auxdata spear300_auxdata_lookup[] __initdata = { static void __init spear300_dt_init(void) { - int ret; - pl080_plat_data.slave_channels = spear300_dma_info; pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear300_dma_info); of_platform_populate(NULL, of_default_bus_match_table, spear300_auxdata_lookup, NULL); - - /* shared irq registration */ - shirq_ras1.regs.base = ioremap(SPEAR300_TELECOM_BASE, SZ_4K); - if (shirq_ras1.regs.base) { - ret = spear_shirq_register(&shirq_ras1); - if (ret) - pr_err("Error registering Shared IRQ\n"); - } } static const char * const spear300_dt_board_compat[] = { diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear3xx/spear310.c index 1d0e435b9045..b963ebb10b56 100644 --- a/arch/arm/mach-spear3xx/spear310.c +++ b/arch/arm/mach-spear3xx/spear310.c @@ -18,7 +18,6 @@ #include #include #include -#include #include #include @@ -27,176 +26,6 @@ #define SPEAR310_UART3_BASE UL(0xB2100000) #define SPEAR310_UART4_BASE UL(0xB2180000) #define SPEAR310_UART5_BASE UL(0xB2200000) -#define SPEAR310_SOC_CONFIG_BASE UL(0xB4000000) - -/* Interrupt registers offsets and masks */ -#define SPEAR310_INT_STS_MASK_REG 0x04 -#define SPEAR310_SMII0_IRQ_MASK (1 << 0) -#define SPEAR310_SMII1_IRQ_MASK (1 << 1) -#define SPEAR310_SMII2_IRQ_MASK (1 << 2) -#define SPEAR310_SMII3_IRQ_MASK (1 << 3) -#define SPEAR310_WAKEUP_SMII0_IRQ_MASK (1 << 4) -#define SPEAR310_WAKEUP_SMII1_IRQ_MASK (1 << 5) -#define SPEAR310_WAKEUP_SMII2_IRQ_MASK (1 << 6) -#define SPEAR310_WAKEUP_SMII3_IRQ_MASK (1 << 7) -#define SPEAR310_UART1_IRQ_MASK (1 << 8) -#define SPEAR310_UART2_IRQ_MASK (1 << 9) -#define SPEAR310_UART3_IRQ_MASK (1 << 10) -#define SPEAR310_UART4_IRQ_MASK (1 << 11) -#define SPEAR310_UART5_IRQ_MASK (1 << 12) -#define SPEAR310_EMI_IRQ_MASK (1 << 13) -#define SPEAR310_TDM_HDLC_IRQ_MASK (1 << 14) -#define SPEAR310_RS485_0_IRQ_MASK (1 << 15) -#define SPEAR310_RS485_1_IRQ_MASK (1 << 16) - -#define SPEAR310_SHIRQ_RAS1_MASK 0x000FF -#define SPEAR310_SHIRQ_RAS2_MASK 0x01F00 -#define SPEAR310_SHIRQ_RAS3_MASK 0x02000 -#define SPEAR310_SHIRQ_INTRCOMM_RAS_MASK 0x1C000 - -/* SPEAr310 Virtual irq definitions */ -/* IRQs sharing IRQ_GEN_RAS_1 */ -#define SPEAR310_VIRQ_SMII0 (SPEAR3XX_VIRQ_START + 0) -#define SPEAR310_VIRQ_SMII1 (SPEAR3XX_VIRQ_START + 1) -#define SPEAR310_VIRQ_SMII2 (SPEAR3XX_VIRQ_START + 2) -#define SPEAR310_VIRQ_SMII3 (SPEAR3XX_VIRQ_START + 3) -#define SPEAR310_VIRQ_WAKEUP_SMII0 (SPEAR3XX_VIRQ_START + 4) -#define SPEAR310_VIRQ_WAKEUP_SMII1 (SPEAR3XX_VIRQ_START + 5) -#define SPEAR310_VIRQ_WAKEUP_SMII2 (SPEAR3XX_VIRQ_START + 6) -#define SPEAR310_VIRQ_WAKEUP_SMII3 (SPEAR3XX_VIRQ_START + 7) - -/* IRQs sharing IRQ_GEN_RAS_2 */ -#define SPEAR310_VIRQ_UART1 (SPEAR3XX_VIRQ_START + 8) -#define SPEAR310_VIRQ_UART2 (SPEAR3XX_VIRQ_START + 9) -#define SPEAR310_VIRQ_UART3 (SPEAR3XX_VIRQ_START + 10) -#define SPEAR310_VIRQ_UART4 (SPEAR3XX_VIRQ_START + 11) -#define SPEAR310_VIRQ_UART5 (SPEAR3XX_VIRQ_START + 12) - -/* IRQs sharing IRQ_GEN_RAS_3 */ -#define SPEAR310_VIRQ_EMI (SPEAR3XX_VIRQ_START + 13) -#define SPEAR310_VIRQ_PLGPIO (SPEAR3XX_VIRQ_START + 14) - -/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */ -#define SPEAR310_VIRQ_TDM_HDLC (SPEAR3XX_VIRQ_START + 15) -#define SPEAR310_VIRQ_RS485_0 (SPEAR3XX_VIRQ_START + 16) -#define SPEAR310_VIRQ_RS485_1 (SPEAR3XX_VIRQ_START + 17) - - -/* spear3xx shared irq */ -static struct shirq_dev_config shirq_ras1_config[] = { - { - .virq = SPEAR310_VIRQ_SMII0, - .status_mask = SPEAR310_SMII0_IRQ_MASK, - }, { - .virq = SPEAR310_VIRQ_SMII1, - .status_mask = SPEAR310_SMII1_IRQ_MASK, - }, { - .virq = SPEAR310_VIRQ_SMII2, - .status_mask = SPEAR310_SMII2_IRQ_MASK, - }, { - .virq = SPEAR310_VIRQ_SMII3, - .status_mask = SPEAR310_SMII3_IRQ_MASK, - }, { - .virq = SPEAR310_VIRQ_WAKEUP_SMII0, - .status_mask = SPEAR310_WAKEUP_SMII0_IRQ_MASK, - }, { - .virq = SPEAR310_VIRQ_WAKEUP_SMII1, - .status_mask = SPEAR310_WAKEUP_SMII1_IRQ_MASK, - }, { - .virq = SPEAR310_VIRQ_WAKEUP_SMII2, - .status_mask = SPEAR310_WAKEUP_SMII2_IRQ_MASK, - }, { - .virq = SPEAR310_VIRQ_WAKEUP_SMII3, - .status_mask = SPEAR310_WAKEUP_SMII3_IRQ_MASK, - }, -}; - -static struct spear_shirq shirq_ras1 = { - .irq = SPEAR3XX_IRQ_GEN_RAS_1, - .dev_config = shirq_ras1_config, - .dev_count = ARRAY_SIZE(shirq_ras1_config), - .regs = { - .enb_reg = -1, - .status_reg = SPEAR310_INT_STS_MASK_REG, - .status_reg_mask = SPEAR310_SHIRQ_RAS1_MASK, - .clear_reg = -1, - }, -}; - -static struct shirq_dev_config shirq_ras2_config[] = { - { - .virq = SPEAR310_VIRQ_UART1, - .status_mask = SPEAR310_UART1_IRQ_MASK, - }, { - .virq = SPEAR310_VIRQ_UART2, - .status_mask = SPEAR310_UART2_IRQ_MASK, - }, { - .virq = SPEAR310_VIRQ_UART3, - .status_mask = SPEAR310_UART3_IRQ_MASK, - }, { - .virq = SPEAR310_VIRQ_UART4, - .status_mask = SPEAR310_UART4_IRQ_MASK, - }, { - .virq = SPEAR310_VIRQ_UART5, - .status_mask = SPEAR310_UART5_IRQ_MASK, - }, -}; - -static struct spear_shirq shirq_ras2 = { - .irq = SPEAR3XX_IRQ_GEN_RAS_2, - .dev_config = shirq_ras2_config, - .dev_count = ARRAY_SIZE(shirq_ras2_config), - .regs = { - .enb_reg = -1, - .status_reg = SPEAR310_INT_STS_MASK_REG, - .status_reg_mask = SPEAR310_SHIRQ_RAS2_MASK, - .clear_reg = -1, - }, -}; - -static struct shirq_dev_config shirq_ras3_config[] = { - { - .virq = SPEAR310_VIRQ_EMI, - .status_mask = SPEAR310_EMI_IRQ_MASK, - }, -}; - -static struct spear_shirq shirq_ras3 = { - .irq = SPEAR3XX_IRQ_GEN_RAS_3, - .dev_config = shirq_ras3_config, - .dev_count = ARRAY_SIZE(shirq_ras3_config), - .regs = { - .enb_reg = -1, - .status_reg = SPEAR310_INT_STS_MASK_REG, - .status_reg_mask = SPEAR310_SHIRQ_RAS3_MASK, - .clear_reg = -1, - }, -}; - -static struct shirq_dev_config shirq_intrcomm_ras_config[] = { - { - .virq = SPEAR310_VIRQ_TDM_HDLC, - .status_mask = SPEAR310_TDM_HDLC_IRQ_MASK, - }, { - .virq = SPEAR310_VIRQ_RS485_0, - .status_mask = SPEAR310_RS485_0_IRQ_MASK, - }, { - .virq = SPEAR310_VIRQ_RS485_1, - .status_mask = SPEAR310_RS485_1_IRQ_MASK, - }, -}; - -static struct spear_shirq shirq_intrcomm_ras = { - .irq = SPEAR3XX_IRQ_INTRCOMM_RAS_ARM, - .dev_config = shirq_intrcomm_ras_config, - .dev_count = ARRAY_SIZE(shirq_intrcomm_ras_config), - .regs = { - .enb_reg = -1, - .status_reg = SPEAR310_INT_STS_MASK_REG, - .status_reg_mask = SPEAR310_SHIRQ_INTRCOMM_RAS_MASK, - .clear_reg = -1, - }, -}; /* DMAC platform data's slave info */ struct pl08x_channel_data spear310_dma_info[] = { @@ -405,42 +234,11 @@ static struct of_dev_auxdata spear310_auxdata_lookup[] __initdata = { static void __init spear310_dt_init(void) { - void __iomem *base; - int ret; - pl080_plat_data.slave_channels = spear310_dma_info; pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear310_dma_info); of_platform_populate(NULL, of_default_bus_match_table, spear310_auxdata_lookup, NULL); - - /* shared irq registration */ - base = ioremap(SPEAR310_SOC_CONFIG_BASE, SZ_4K); - if (base) { - /* shirq 1 */ - shirq_ras1.regs.base = base; - ret = spear_shirq_register(&shirq_ras1); - if (ret) - pr_err("Error registering Shared IRQ 1\n"); - - /* shirq 2 */ - shirq_ras2.regs.base = base; - ret = spear_shirq_register(&shirq_ras2); - if (ret) - pr_err("Error registering Shared IRQ 2\n"); - - /* shirq 3 */ - shirq_ras3.regs.base = base; - ret = spear_shirq_register(&shirq_ras3); - if (ret) - pr_err("Error registering Shared IRQ 3\n"); - - /* shirq 4 */ - shirq_intrcomm_ras.regs.base = base; - ret = spear_shirq_register(&shirq_intrcomm_ras); - if (ret) - pr_err("Error registering Shared IRQ 4\n"); - } } static const char * const spear310_dt_board_compat[] = { diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c index fd823c624575..707504b84e0e 100644 --- a/arch/arm/mach-spear3xx/spear320.c +++ b/arch/arm/mach-spear3xx/spear320.c @@ -19,7 +19,6 @@ #include #include #include -#include #include #include @@ -28,184 +27,6 @@ #define SPEAR320_SSP0_BASE UL(0xA5000000) #define SPEAR320_SSP1_BASE UL(0xA6000000) -/* Interrupt registers offsets and masks */ -#define SPEAR320_INT_STS_MASK_REG 0x04 -#define SPEAR320_INT_CLR_MASK_REG 0x04 -#define SPEAR320_INT_ENB_MASK_REG 0x08 -#define SPEAR320_GPIO_IRQ_MASK (1 << 0) -#define SPEAR320_I2S_PLAY_IRQ_MASK (1 << 1) -#define SPEAR320_I2S_REC_IRQ_MASK (1 << 2) -#define SPEAR320_EMI_IRQ_MASK (1 << 7) -#define SPEAR320_CLCD_IRQ_MASK (1 << 8) -#define SPEAR320_SPP_IRQ_MASK (1 << 9) -#define SPEAR320_SDHCI_IRQ_MASK (1 << 10) -#define SPEAR320_CAN_U_IRQ_MASK (1 << 11) -#define SPEAR320_CAN_L_IRQ_MASK (1 << 12) -#define SPEAR320_UART1_IRQ_MASK (1 << 13) -#define SPEAR320_UART2_IRQ_MASK (1 << 14) -#define SPEAR320_SSP1_IRQ_MASK (1 << 15) -#define SPEAR320_SSP2_IRQ_MASK (1 << 16) -#define SPEAR320_SMII0_IRQ_MASK (1 << 17) -#define SPEAR320_MII1_SMII1_IRQ_MASK (1 << 18) -#define SPEAR320_WAKEUP_SMII0_IRQ_MASK (1 << 19) -#define SPEAR320_WAKEUP_MII1_SMII1_IRQ_MASK (1 << 20) -#define SPEAR320_I2C1_IRQ_MASK (1 << 21) - -#define SPEAR320_SHIRQ_RAS1_MASK 0x000380 -#define SPEAR320_SHIRQ_RAS3_MASK 0x000007 -#define SPEAR320_SHIRQ_INTRCOMM_RAS_MASK 0x3FF800 - -/* SPEAr320 Virtual irq definitions */ -/* IRQs sharing IRQ_GEN_RAS_1 */ -#define SPEAR320_VIRQ_EMI (SPEAR3XX_VIRQ_START + 0) -#define SPEAR320_VIRQ_CLCD (SPEAR3XX_VIRQ_START + 1) -#define SPEAR320_VIRQ_SPP (SPEAR3XX_VIRQ_START + 2) - -/* IRQs sharing IRQ_GEN_RAS_2 */ -#define SPEAR320_IRQ_SDHCI SPEAR3XX_IRQ_GEN_RAS_2 - -/* IRQs sharing IRQ_GEN_RAS_3 */ -#define SPEAR320_VIRQ_PLGPIO (SPEAR3XX_VIRQ_START + 3) -#define SPEAR320_VIRQ_I2S_PLAY (SPEAR3XX_VIRQ_START + 4) -#define SPEAR320_VIRQ_I2S_REC (SPEAR3XX_VIRQ_START + 5) - -/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */ -#define SPEAR320_VIRQ_CANU (SPEAR3XX_VIRQ_START + 6) -#define SPEAR320_VIRQ_CANL (SPEAR3XX_VIRQ_START + 7) -#define SPEAR320_VIRQ_UART1 (SPEAR3XX_VIRQ_START + 8) -#define SPEAR320_VIRQ_UART2 (SPEAR3XX_VIRQ_START + 9) -#define SPEAR320_VIRQ_SSP1 (SPEAR3XX_VIRQ_START + 10) -#define SPEAR320_VIRQ_SSP2 (SPEAR3XX_VIRQ_START + 11) -#define SPEAR320_VIRQ_SMII0 (SPEAR3XX_VIRQ_START + 12) -#define SPEAR320_VIRQ_MII1_SMII1 (SPEAR3XX_VIRQ_START + 13) -#define SPEAR320_VIRQ_WAKEUP_SMII0 (SPEAR3XX_VIRQ_START + 14) -#define SPEAR320_VIRQ_WAKEUP_MII1_SMII1 (SPEAR3XX_VIRQ_START + 15) -#define SPEAR320_VIRQ_I2C1 (SPEAR3XX_VIRQ_START + 16) - -/* spear3xx shared irq */ -static struct shirq_dev_config shirq_ras1_config[] = { - { - .virq = SPEAR320_VIRQ_EMI, - .status_mask = SPEAR320_EMI_IRQ_MASK, - .clear_mask = SPEAR320_EMI_IRQ_MASK, - }, { - .virq = SPEAR320_VIRQ_CLCD, - .status_mask = SPEAR320_CLCD_IRQ_MASK, - .clear_mask = SPEAR320_CLCD_IRQ_MASK, - }, { - .virq = SPEAR320_VIRQ_SPP, - .status_mask = SPEAR320_SPP_IRQ_MASK, - .clear_mask = SPEAR320_SPP_IRQ_MASK, - }, -}; - -static struct spear_shirq shirq_ras1 = { - .irq = SPEAR3XX_IRQ_GEN_RAS_1, - .dev_config = shirq_ras1_config, - .dev_count = ARRAY_SIZE(shirq_ras1_config), - .regs = { - .enb_reg = -1, - .status_reg = SPEAR320_INT_STS_MASK_REG, - .status_reg_mask = SPEAR320_SHIRQ_RAS1_MASK, - .clear_reg = SPEAR320_INT_CLR_MASK_REG, - .reset_to_clear = 1, - }, -}; - -static struct shirq_dev_config shirq_ras3_config[] = { - { - .virq = SPEAR320_VIRQ_PLGPIO, - .enb_mask = SPEAR320_GPIO_IRQ_MASK, - .status_mask = SPEAR320_GPIO_IRQ_MASK, - .clear_mask = SPEAR320_GPIO_IRQ_MASK, - }, { - .virq = SPEAR320_VIRQ_I2S_PLAY, - .enb_mask = SPEAR320_I2S_PLAY_IRQ_MASK, - .status_mask = SPEAR320_I2S_PLAY_IRQ_MASK, - .clear_mask = SPEAR320_I2S_PLAY_IRQ_MASK, - }, { - .virq = SPEAR320_VIRQ_I2S_REC, - .enb_mask = SPEAR320_I2S_REC_IRQ_MASK, - .status_mask = SPEAR320_I2S_REC_IRQ_MASK, - .clear_mask = SPEAR320_I2S_REC_IRQ_MASK, - }, -}; - -static struct spear_shirq shirq_ras3 = { - .irq = SPEAR3XX_IRQ_GEN_RAS_3, - .dev_config = shirq_ras3_config, - .dev_count = ARRAY_SIZE(shirq_ras3_config), - .regs = { - .enb_reg = SPEAR320_INT_ENB_MASK_REG, - .reset_to_enb = 1, - .status_reg = SPEAR320_INT_STS_MASK_REG, - .status_reg_mask = SPEAR320_SHIRQ_RAS3_MASK, - .clear_reg = SPEAR320_INT_CLR_MASK_REG, - .reset_to_clear = 1, - }, -}; - -static struct shirq_dev_config shirq_intrcomm_ras_config[] = { - { - .virq = SPEAR320_VIRQ_CANU, - .status_mask = SPEAR320_CAN_U_IRQ_MASK, - .clear_mask = SPEAR320_CAN_U_IRQ_MASK, - }, { - .virq = SPEAR320_VIRQ_CANL, - .status_mask = SPEAR320_CAN_L_IRQ_MASK, - .clear_mask = SPEAR320_CAN_L_IRQ_MASK, - }, { - .virq = SPEAR320_VIRQ_UART1, - .status_mask = SPEAR320_UART1_IRQ_MASK, - .clear_mask = SPEAR320_UART1_IRQ_MASK, - }, { - .virq = SPEAR320_VIRQ_UART2, - .status_mask = SPEAR320_UART2_IRQ_MASK, - .clear_mask = SPEAR320_UART2_IRQ_MASK, - }, { - .virq = SPEAR320_VIRQ_SSP1, - .status_mask = SPEAR320_SSP1_IRQ_MASK, - .clear_mask = SPEAR320_SSP1_IRQ_MASK, - }, { - .virq = SPEAR320_VIRQ_SSP2, - .status_mask = SPEAR320_SSP2_IRQ_MASK, - .clear_mask = SPEAR320_SSP2_IRQ_MASK, - }, { - .virq = SPEAR320_VIRQ_SMII0, - .status_mask = SPEAR320_SMII0_IRQ_MASK, - .clear_mask = SPEAR320_SMII0_IRQ_MASK, - }, { - .virq = SPEAR320_VIRQ_MII1_SMII1, - .status_mask = SPEAR320_MII1_SMII1_IRQ_MASK, - .clear_mask = SPEAR320_MII1_SMII1_IRQ_MASK, - }, { - .virq = SPEAR320_VIRQ_WAKEUP_SMII0, - .status_mask = SPEAR320_WAKEUP_SMII0_IRQ_MASK, - .clear_mask = SPEAR320_WAKEUP_SMII0_IRQ_MASK, - }, { - .virq = SPEAR320_VIRQ_WAKEUP_MII1_SMII1, - .status_mask = SPEAR320_WAKEUP_MII1_SMII1_IRQ_MASK, - .clear_mask = SPEAR320_WAKEUP_MII1_SMII1_IRQ_MASK, - }, { - .virq = SPEAR320_VIRQ_I2C1, - .status_mask = SPEAR320_I2C1_IRQ_MASK, - .clear_mask = SPEAR320_I2C1_IRQ_MASK, - }, -}; - -static struct spear_shirq shirq_intrcomm_ras = { - .irq = SPEAR3XX_IRQ_INTRCOMM_RAS_ARM, - .dev_config = shirq_intrcomm_ras_config, - .dev_count = ARRAY_SIZE(shirq_intrcomm_ras_config), - .regs = { - .enb_reg = -1, - .status_reg = SPEAR320_INT_STS_MASK_REG, - .status_reg_mask = SPEAR320_SHIRQ_INTRCOMM_RAS_MASK, - .clear_reg = SPEAR320_INT_CLR_MASK_REG, - .reset_to_clear = 1, - }, -}; - /* DMAC platform data's slave info */ struct pl08x_channel_data spear320_dma_info[] = { { @@ -416,36 +237,11 @@ static struct of_dev_auxdata spear320_auxdata_lookup[] __initdata = { static void __init spear320_dt_init(void) { - void __iomem *base; - int ret; - pl080_plat_data.slave_channels = spear320_dma_info; pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear320_dma_info); of_platform_populate(NULL, of_default_bus_match_table, spear320_auxdata_lookup, NULL); - - /* shared irq registration */ - base = ioremap(SPEAR320_SOC_CONFIG_BASE, SZ_4K); - if (base) { - /* shirq 1 */ - shirq_ras1.regs.base = base; - ret = spear_shirq_register(&shirq_ras1); - if (ret) - pr_err("Error registering Shared IRQ 1\n"); - - /* shirq 3 */ - shirq_ras3.regs.base = base; - ret = spear_shirq_register(&shirq_ras3); - if (ret) - pr_err("Error registering Shared IRQ 3\n"); - - /* shirq 4 */ - shirq_intrcomm_ras.regs.base = base; - ret = spear_shirq_register(&shirq_intrcomm_ras); - if (ret) - pr_err("Error registering Shared IRQ 4\n"); - } } static const char * const spear320_dt_board_compat[] = { diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c index 98144baf8883..f1aaf5b168b2 100644 --- a/arch/arm/mach-spear3xx/spear3xx.c +++ b/arch/arm/mach-spear3xx/spear3xx.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include @@ -121,6 +122,9 @@ struct sys_timer spear3xx_timer = { static const struct of_device_id vic_of_match[] __initconst = { { .compatible = "arm,pl190-vic", .data = vic_of_init, }, + { .compatible = "st,spear300-shirq", .data = spear300_shirq_of_init, }, + { .compatible = "st,spear310-shirq", .data = spear310_shirq_of_init, }, + { .compatible = "st,spear320-shirq", .data = spear320_shirq_of_init, }, { /* Sentinel */ } }; diff --git a/arch/arm/plat-spear/include/plat/shirq.h b/arch/arm/plat-spear/include/plat/shirq.h index 88a7fbd24793..c51b355f00de 100644 --- a/arch/arm/plat-spear/include/plat/shirq.h +++ b/arch/arm/plat-spear/include/plat/shirq.h @@ -17,25 +17,9 @@ #include #include -/* - * struct shirq_dev_config: shared irq device configuration - * - * virq: virtual irq number of device - * enb_mask: enable mask of device - * status_mask: status mask of device - * clear_mask: clear mask of device - */ -struct shirq_dev_config { - u32 virq; - u32 enb_mask; - u32 status_mask; - u32 clear_mask; -}; - /* * struct shirq_regs: shared irq register configuration * - * base: base address of shared irq register * enb_reg: enable register offset * reset_to_enb: val 1 indicates, we need to clear bit for enabling interrupt * status_reg: status register offset @@ -44,11 +28,9 @@ struct shirq_dev_config { * reset_to_clear: val 1 indicates, we need to clear bit for clearing interrupt */ struct shirq_regs { - void __iomem *base; u32 enb_reg; u32 reset_to_enb; u32 status_reg; - u32 status_reg_mask; u32 clear_reg; u32 reset_to_clear; }; @@ -57,17 +39,28 @@ struct shirq_regs { * struct spear_shirq: shared irq structure * * irq: hardware irq number - * dev_config: array of device config structures which are using "irq" line - * dev_count: size of dev_config array + * irq_base: base irq in linux domain + * irq_nr: no. of shared interrupts in a particular block + * irq_bit_off: starting bit offset in the status register + * invalid_irq: irq group is currently disabled + * base: base address of shared irq register * regs: register configuration for shared irq block */ struct spear_shirq { u32 irq; - struct shirq_dev_config *dev_config; - u32 dev_count; + u32 irq_base; + u32 irq_nr; + u32 irq_bit_off; + int invalid_irq; + void __iomem *base; struct shirq_regs regs; }; -int spear_shirq_register(struct spear_shirq *shirq); +int __init spear300_shirq_of_init(struct device_node *np, + struct device_node *parent); +int __init spear310_shirq_of_init(struct device_node *np, + struct device_node *parent); +int __init spear320_shirq_of_init(struct device_node *np, + struct device_node *parent); #endif /* __PLAT_SHIRQ_H */ diff --git a/arch/arm/plat-spear/shirq.c b/arch/arm/plat-spear/shirq.c index 853e891e1184..955c7249a5c1 100644 --- a/arch/arm/plat-spear/shirq.c +++ b/arch/arm/plat-spear/shirq.c @@ -10,56 +10,182 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include +#include +#include #include #include +#include +#include +#include +#include #include #include -struct spear_shirq *shirq; static DEFINE_SPINLOCK(lock); -static void shirq_irq_mask(struct irq_data *d) +/* spear300 shared irq registers offsets and masks */ +#define SPEAR300_INT_ENB_MASK_REG 0x54 +#define SPEAR300_INT_STS_MASK_REG 0x58 + +static struct spear_shirq spear300_shirq_ras1 = { + .irq_nr = 9, + .irq_bit_off = 0, + .regs = { + .enb_reg = SPEAR300_INT_ENB_MASK_REG, + .status_reg = SPEAR300_INT_STS_MASK_REG, + .clear_reg = -1, + }, +}; + +static struct spear_shirq *spear300_shirq_blocks[] = { + &spear300_shirq_ras1, +}; + +/* spear310 shared irq registers offsets and masks */ +#define SPEAR310_INT_STS_MASK_REG 0x04 + +static struct spear_shirq spear310_shirq_ras1 = { + .irq_nr = 8, + .irq_bit_off = 0, + .regs = { + .enb_reg = -1, + .status_reg = SPEAR310_INT_STS_MASK_REG, + .clear_reg = -1, + }, +}; + +static struct spear_shirq spear310_shirq_ras2 = { + .irq_nr = 5, + .irq_bit_off = 8, + .regs = { + .enb_reg = -1, + .status_reg = SPEAR310_INT_STS_MASK_REG, + .clear_reg = -1, + }, +}; + +static struct spear_shirq spear310_shirq_ras3 = { + .irq_nr = 1, + .irq_bit_off = 13, + .regs = { + .enb_reg = -1, + .status_reg = SPEAR310_INT_STS_MASK_REG, + .clear_reg = -1, + }, +}; + +static struct spear_shirq spear310_shirq_intrcomm_ras = { + .irq_nr = 3, + .irq_bit_off = 14, + .regs = { + .enb_reg = -1, + .status_reg = SPEAR310_INT_STS_MASK_REG, + .clear_reg = -1, + }, +}; + +static struct spear_shirq *spear310_shirq_blocks[] = { + &spear310_shirq_ras1, + &spear310_shirq_ras2, + &spear310_shirq_ras3, + &spear310_shirq_intrcomm_ras, +}; + +/* spear320 shared irq registers offsets and masks */ +#define SPEAR320_INT_STS_MASK_REG 0x04 +#define SPEAR320_INT_CLR_MASK_REG 0x04 +#define SPEAR320_INT_ENB_MASK_REG 0x08 + +static struct spear_shirq spear320_shirq_ras1 = { + .irq_nr = 3, + .irq_bit_off = 7, + .regs = { + .enb_reg = -1, + .status_reg = SPEAR320_INT_STS_MASK_REG, + .clear_reg = SPEAR320_INT_CLR_MASK_REG, + .reset_to_clear = 1, + }, +}; + +static struct spear_shirq spear320_shirq_ras2 = { + .irq_nr = 1, + .irq_bit_off = 10, + .regs = { + .enb_reg = -1, + .status_reg = SPEAR320_INT_STS_MASK_REG, + .clear_reg = SPEAR320_INT_CLR_MASK_REG, + .reset_to_clear = 1, + }, +}; + +static struct spear_shirq spear320_shirq_ras3 = { + .irq_nr = 3, + .irq_bit_off = 0, + .invalid_irq = 1, + .regs = { + .enb_reg = SPEAR320_INT_ENB_MASK_REG, + .reset_to_enb = 1, + .status_reg = SPEAR320_INT_STS_MASK_REG, + .clear_reg = SPEAR320_INT_CLR_MASK_REG, + .reset_to_clear = 1, + }, +}; + +static struct spear_shirq spear320_shirq_intrcomm_ras = { + .irq_nr = 11, + .irq_bit_off = 11, + .regs = { + .enb_reg = -1, + .status_reg = SPEAR320_INT_STS_MASK_REG, + .clear_reg = SPEAR320_INT_CLR_MASK_REG, + .reset_to_clear = 1, + }, +}; + +static struct spear_shirq *spear320_shirq_blocks[] = { + &spear320_shirq_ras3, + &spear320_shirq_ras1, + &spear320_shirq_ras2, + &spear320_shirq_intrcomm_ras, +}; + +static void shirq_irq_mask_unmask(struct irq_data *d, bool mask) { struct spear_shirq *shirq = irq_data_get_irq_chip_data(d); - u32 val, id = d->irq - shirq->dev_config[0].virq; + u32 val, offset = d->irq - shirq->irq_base; unsigned long flags; - if ((shirq->regs.enb_reg == -1) || shirq->dev_config[id].enb_mask == -1) + if (shirq->regs.enb_reg == -1) return; spin_lock_irqsave(&lock, flags); - val = readl(shirq->regs.base + shirq->regs.enb_reg); - if (shirq->regs.reset_to_enb) - val |= shirq->dev_config[id].enb_mask; + val = readl(shirq->base + shirq->regs.enb_reg); + + if (mask ^ shirq->regs.reset_to_enb) + val &= ~(0x1 << shirq->irq_bit_off << offset); else - val &= ~(shirq->dev_config[id].enb_mask); - writel(val, shirq->regs.base + shirq->regs.enb_reg); + val |= 0x1 << shirq->irq_bit_off << offset; + + writel(val, shirq->base + shirq->regs.enb_reg); spin_unlock_irqrestore(&lock, flags); + +} + +static void shirq_irq_mask(struct irq_data *d) +{ + shirq_irq_mask_unmask(d, 1); } static void shirq_irq_unmask(struct irq_data *d) { - struct spear_shirq *shirq = irq_data_get_irq_chip_data(d); - u32 val, id = d->irq - shirq->dev_config[0].virq; - unsigned long flags; - - if ((shirq->regs.enb_reg == -1) || shirq->dev_config[id].enb_mask == -1) - return; - - spin_lock_irqsave(&lock, flags); - val = readl(shirq->regs.base + shirq->regs.enb_reg); - if (shirq->regs.reset_to_enb) - val &= ~(shirq->dev_config[id].enb_mask); - else - val |= shirq->dev_config[id].enb_mask; - writel(val, shirq->regs.base + shirq->regs.enb_reg); - spin_unlock_irqrestore(&lock, flags); + shirq_irq_mask_unmask(d, 0); } static struct irq_chip shirq_chip = { - .name = "spear_shirq", + .name = "spear-shirq", .irq_ack = shirq_irq_mask, .irq_mask = shirq_irq_mask, .irq_unmask = shirq_irq_unmask, @@ -67,52 +193,123 @@ static struct irq_chip shirq_chip = { static void shirq_handler(unsigned irq, struct irq_desc *desc) { - u32 i, val, mask; + u32 i, j, val, mask, tmp; + struct irq_chip *chip; struct spear_shirq *shirq = irq_get_handler_data(irq); - desc->irq_data.chip->irq_ack(&desc->irq_data); - while ((val = readl(shirq->regs.base + shirq->regs.status_reg) & - shirq->regs.status_reg_mask)) { - for (i = 0; (i < shirq->dev_count) && val; i++) { - if (!(shirq->dev_config[i].status_mask & val)) + chip = irq_get_chip(irq); + chip->irq_ack(&desc->irq_data); + + mask = ((0x1 << shirq->irq_nr) - 1) << shirq->irq_bit_off; + while ((val = readl(shirq->base + shirq->regs.status_reg) & + mask)) { + + val >>= shirq->irq_bit_off; + for (i = 0, j = 1; i < shirq->irq_nr; i++, j <<= 1) { + + if (!(j & val)) continue; - generic_handle_irq(shirq->dev_config[i].virq); + generic_handle_irq(shirq->irq_base + i); /* clear interrupt */ - val &= ~shirq->dev_config[i].status_mask; - if ((shirq->regs.clear_reg == -1) || - shirq->dev_config[i].clear_mask == -1) + if (shirq->regs.clear_reg == -1) continue; - mask = readl(shirq->regs.base + shirq->regs.clear_reg); + + tmp = readl(shirq->base + shirq->regs.clear_reg); if (shirq->regs.reset_to_clear) - mask &= ~shirq->dev_config[i].clear_mask; + tmp &= ~(j << shirq->irq_bit_off); else - mask |= shirq->dev_config[i].clear_mask; - writel(mask, shirq->regs.base + shirq->regs.clear_reg); + tmp |= (j << shirq->irq_bit_off); + writel(tmp, shirq->base + shirq->regs.clear_reg); } } - desc->irq_data.chip->irq_unmask(&desc->irq_data); + chip->irq_unmask(&desc->irq_data); } -int spear_shirq_register(struct spear_shirq *shirq) +static void __init spear_shirq_register(struct spear_shirq *shirq) { int i; - if (!shirq || !shirq->dev_config || !shirq->regs.base) - return -EFAULT; - - if (!shirq->dev_count) - return -EINVAL; + if (shirq->invalid_irq) + return; irq_set_chained_handler(shirq->irq, shirq_handler); - for (i = 0; i < shirq->dev_count; i++) { - irq_set_chip_and_handler(shirq->dev_config[i].virq, + for (i = 0; i < shirq->irq_nr; i++) { + irq_set_chip_and_handler(shirq->irq_base + i, &shirq_chip, handle_simple_irq); - set_irq_flags(shirq->dev_config[i].virq, IRQF_VALID); - irq_set_chip_data(shirq->dev_config[i].virq, shirq); + set_irq_flags(shirq->irq_base + i, IRQF_VALID); + irq_set_chip_data(shirq->irq_base + i, shirq); } irq_set_handler_data(shirq->irq, shirq); - return 0; +} + +static int __init shirq_init(struct spear_shirq **shirq_blocks, int block_nr, + struct device_node *np) +{ + int i, irq_base, hwirq = 0, irq_nr = 0; + static struct irq_domain *shirq_domain; + void __iomem *base; + + base = of_iomap(np, 0); + if (!base) { + pr_err("%s: failed to map shirq registers\n", __func__); + return -ENXIO; + } + + for (i = 0; i < block_nr; i++) + irq_nr += shirq_blocks[i]->irq_nr; + + irq_base = irq_alloc_descs(-1, 0, irq_nr, 0); + if (IS_ERR_VALUE(irq_base)) { + pr_err("%s: irq desc alloc failed\n", __func__); + goto err_unmap; + } + + shirq_domain = irq_domain_add_legacy(np, irq_nr, irq_base, 0, + &irq_domain_simple_ops, NULL); + if (WARN_ON(!shirq_domain)) { + pr_warn("%s: irq domain init failed\n", __func__); + goto err_free_desc; + } + + for (i = 0; i < block_nr; i++) { + shirq_blocks[i]->base = base; + shirq_blocks[i]->irq_base = irq_find_mapping(shirq_domain, + hwirq); + shirq_blocks[i]->irq = irq_of_parse_and_map(np, i); + + spear_shirq_register(shirq_blocks[i]); + hwirq += shirq_blocks[i]->irq_nr; + } + + return 0; + +err_free_desc: + irq_free_descs(irq_base, irq_nr); +err_unmap: + iounmap(base); + return -ENXIO; +} + +int __init spear300_shirq_of_init(struct device_node *np, + struct device_node *parent) +{ + return shirq_init(spear300_shirq_blocks, + ARRAY_SIZE(spear300_shirq_blocks), np); +} + +int __init spear310_shirq_of_init(struct device_node *np, + struct device_node *parent) +{ + return shirq_init(spear310_shirq_blocks, + ARRAY_SIZE(spear310_shirq_blocks), np); +} + +int __init spear320_shirq_of_init(struct device_node *np, + struct device_node *parent) +{ + return shirq_init(spear320_shirq_blocks, + ARRAY_SIZE(spear320_shirq_blocks), np); } From 86edd7b8ac2791ddf42ab082799ddb843813c3bc Mon Sep 17 00:00:00 2001 From: Shiraz Hashim Date: Fri, 3 Aug 2012 16:00:18 +0530 Subject: [PATCH 12/14] ARM: SPEAr3xx: DT: add shirq node for interrupt multiplexor shirq layer has been adapted to DT, add corresponding nodes in all SPEAr3xx variants. Signed-off-by: Shiraz Hashim Signed-off-by: Viresh Kumar --- arch/arm/boot/dts/spear300.dtsi | 12 ++++++++++++ arch/arm/boot/dts/spear310.dtsi | 18 ++++++++++++++++++ arch/arm/boot/dts/spear320.dtsi | 24 ++++++++++++++++++++++-- 3 files changed, 52 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/spear300.dtsi b/arch/arm/boot/dts/spear300.dtsi index fdac8713367a..090adc656015 100644 --- a/arch/arm/boot/dts/spear300.dtsi +++ b/arch/arm/boot/dts/spear300.dtsi @@ -52,6 +52,14 @@ status = "disabled"; }; + shirq: interrupt-controller@0x50000000 { + compatible = "st,spear300-shirq"; + reg = <0x50000000 0x1000>; + interrupts = <28>; + #interrupt-cells = <1>; + interrupt-controller; + }; + apb { #address-cells = <1>; #size-cells = <1>; @@ -64,12 +72,16 @@ compatible = "arm,pl061", "arm,primecell"; gpio-controller; reg = <0xa9000000 0x1000>; + interrupts = <8>; + interrupt-parent = <&shirq>; status = "disabled"; }; kbd@a0000000 { compatible = "st,spear300-kbd"; reg = <0xa0000000 0x1000>; + interrupts = <7>; + interrupt-parent = <&shirq>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/spear310.dtsi b/arch/arm/boot/dts/spear310.dtsi index 930303e48df9..e814e5e97083 100644 --- a/arch/arm/boot/dts/spear310.dtsi +++ b/arch/arm/boot/dts/spear310.dtsi @@ -40,6 +40,14 @@ status = "disabled"; }; + shirq: interrupt-controller@0xb4000000 { + compatible = "st,spear310-shirq"; + reg = <0xb4000000 0x1000>; + interrupts = <28 29 30 1>; + #interrupt-cells = <1>; + interrupt-controller; + }; + apb { #address-cells = <1>; #size-cells = <1>; @@ -50,30 +58,40 @@ serial@b2000000 { compatible = "arm,pl011", "arm,primecell"; reg = <0xb2000000 0x1000>; + interrupts = <8>; + interrupt-parent = <&shirq>; status = "disabled"; }; serial@b2080000 { compatible = "arm,pl011", "arm,primecell"; reg = <0xb2080000 0x1000>; + interrupts = <9>; + interrupt-parent = <&shirq>; status = "disabled"; }; serial@b2100000 { compatible = "arm,pl011", "arm,primecell"; reg = <0xb2100000 0x1000>; + interrupts = <10>; + interrupt-parent = <&shirq>; status = "disabled"; }; serial@b2180000 { compatible = "arm,pl011", "arm,primecell"; reg = <0xb2180000 0x1000>; + interrupts = <11>; + interrupt-parent = <&shirq>; status = "disabled"; }; serial@b2200000 { compatible = "arm,pl011", "arm,primecell"; reg = <0xb2200000 0x1000>; + interrupts = <12>; + interrupt-parent = <&shirq>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/spear320.dtsi b/arch/arm/boot/dts/spear320.dtsi index 6ff0d1e0e461..c056a84deabf 100644 --- a/arch/arm/boot/dts/spear320.dtsi +++ b/arch/arm/boot/dts/spear320.dtsi @@ -30,7 +30,8 @@ clcd@90000000 { compatible = "arm,pl110", "arm,primecell"; reg = <0x90000000 0x1000>; - interrupts = <33>; + interrupts = <8>; + interrupt-parent = <&shirq>; status = "disabled"; }; @@ -49,13 +50,24 @@ sdhci@70000000 { compatible = "st,sdhci-spear"; reg = <0x70000000 0x100>; - interrupts = <29>; + interrupts = <10>; + interrupt-parent = <&shirq>; status = "disabled"; }; + shirq: interrupt-controller@0xb3000000 { + compatible = "st,spear320-shirq"; + reg = <0xb3000000 0x1000>; + interrupts = <30 28 29 1>; + #interrupt-cells = <1>; + interrupt-controller; + }; + spi1: spi@a5000000 { compatible = "arm,pl022", "arm,primecell"; reg = <0xa5000000 0x1000>; + interrupts = <15>; + interrupt-parent = <&shirq>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -64,6 +76,8 @@ spi2: spi@a6000000 { compatible = "arm,pl022", "arm,primecell"; reg = <0xa6000000 0x1000>; + interrupts = <16>; + interrupt-parent = <&shirq>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -88,18 +102,24 @@ #size-cells = <0>; compatible = "snps,designware-i2c"; reg = <0xa7000000 0x1000>; + interrupts = <21>; + interrupt-parent = <&shirq>; status = "disabled"; }; serial@a3000000 { compatible = "arm,pl011", "arm,primecell"; reg = <0xa3000000 0x1000>; + interrupts = <13>; + interrupt-parent = <&shirq>; status = "disabled"; }; serial@a4000000 { compatible = "arm,pl011", "arm,primecell"; reg = <0xa4000000 0x1000>; + interrupts = <14>; + interrupt-parent = <&shirq>; status = "disabled"; }; From e2eb69183ec4156eb814e67672e492bf902bbcd2 Mon Sep 17 00:00:00 2001 From: Shiraz Hashim Date: Thu, 9 Aug 2012 04:50:11 +0530 Subject: [PATCH 13/14] ARM: SPEAr320: DT: Add SPEAr 320 HMI board support This adds support for SPEAr320-HMI board. Signed-off-by: Shiraz Hashim Signed-off-by: Viresh Kumar --- arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/spear320-hmi.dts | 305 +++++++++++++++++++++++++++++ arch/arm/mach-spear3xx/spear320.c | 1 + 3 files changed, 308 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/spear320-hmi.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index f37cf9fa5fa0..07e6cfaaa319 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -82,7 +82,8 @@ dtb-$(CONFIG_ARCH_SPEAR13XX) += spear1310-evb.dtb \ spear1340-evb.dtb dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \ spear310-evb.dtb \ - spear320-evb.dtb + spear320-evb.dtb \ + spear320-hmi.dtb dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra20-medcom-wide.dtb \ diff --git a/arch/arm/boot/dts/spear320-hmi.dts b/arch/arm/boot/dts/spear320-hmi.dts new file mode 100644 index 000000000000..3075d2d3a8be --- /dev/null +++ b/arch/arm/boot/dts/spear320-hmi.dts @@ -0,0 +1,305 @@ +/* + * DTS file for SPEAr320 Evaluation Baord + * + * Copyright 2012 Shiraz Hashim + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "spear320.dtsi" + +/ { + model = "ST SPEAr320 HMI Board"; + compatible = "st,spear320-hmi", "st,spear320"; + #address-cells = <1>; + #size-cells = <1>; + + memory { + reg = <0 0x40000000>; + }; + + ahb { + pinmux@b3000000 { + st,pinmux-mode = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + i2c0 { + st,pins = "i2c0_grp"; + st,function = "i2c0"; + }; + ssp0 { + st,pins = "ssp0_grp"; + st,function = "ssp0"; + }; + uart0 { + st,pins = "uart0_grp"; + st,function = "uart0"; + }; + clcd { + st,pins = "clcd_grp"; + st,function = "clcd"; + }; + fsmc { + st,pins = "fsmc_8bit_grp"; + st,function = "fsmc"; + }; + sdhci { + st,pins = "sdhci_cd_12_grp"; + st,function = "sdhci"; + }; + i2s { + st,pins = "i2s_grp"; + st,function = "i2s"; + }; + uart1 { + st,pins = "uart1_grp"; + st,function = "uart1"; + }; + uart2 { + st,pins = "uart2_grp"; + st,function = "uart2"; + }; + can0 { + st,pins = "can0_grp"; + st,function = "can0"; + }; + can1 { + st,pins = "can1_grp"; + st,function = "can1"; + }; + mii0_1 { + st,pins = "rmii0_1_grp"; + st,function = "mii0_1"; + }; + pwm0_1 { + st,pins = "pwm0_1_pin_37_38_grp"; + st,function = "pwm0_1"; + }; + pwm2 { + st,pins = "pwm2_pin_34_grp"; + st,function = "pwm2"; + }; + }; + }; + + clcd@90000000 { + status = "okay"; + }; + + dma@fc400000 { + status = "okay"; + }; + + ehci@e1800000 { + status = "okay"; + }; + + fsmc: flash@4c000000 { + status = "okay"; + + partition@0 { + label = "xloader"; + reg = <0x0 0x80000>; + }; + partition@80000 { + label = "u-boot"; + reg = <0x80000 0x140000>; + }; + partition@1C0000 { + label = "environment"; + reg = <0x1C0000 0x40000>; + }; + partition@200000 { + label = "dtb"; + reg = <0x200000 0x40000>; + }; + partition@240000 { + label = "linux"; + reg = <0x240000 0xC00000>; + }; + partition@E40000 { + label = "rootfs"; + reg = <0xE40000 0x0>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + label = "user button 1"; + linux,code = <0x100>; + gpios = <&stmpegpio 3 0x4>; + debounce-interval = <20>; + gpio-key,wakeup = <1>; + }; + + button@2 { + label = "user button 2"; + linux,code = <0x200>; + gpios = <&stmpegpio 2 0x4>; + debounce-interval = <20>; + gpio-key,wakeup = <1>; + }; + }; + + ohci@e1900000 { + status = "okay"; + }; + + ohci@e2100000 { + status = "okay"; + }; + + pwm: pwm@a8000000 { + status = "okay"; + }; + + sdhci@70000000 { + power-gpio = <&gpiopinctrl 50 1>; + power_always_enb; + status = "okay"; + }; + + smi: flash@fc000000 { + status = "okay"; + clock-rate=<50000000>; + + flash@f8000000 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xf8000000 0x800000>; + st,smi-fast-mode; + + partition@0 { + label = "xloader"; + reg = <0x0 0x10000>; + }; + partition@10000 { + label = "u-boot"; + reg = <0x10000 0x50000>; + }; + partition@60000 { + label = "environment"; + reg = <0x60000 0x10000>; + }; + partition@70000 { + label = "dtb"; + reg = <0x70000 0x10000>; + }; + partition@80000 { + label = "linux"; + reg = <0x80000 0x310000>; + }; + partition@390000 { + label = "rootfs"; + reg = <0x390000 0x0>; + }; + }; + }; + + spi0: spi@d0100000 { + status = "okay"; + }; + + spi1: spi@a5000000 { + status = "okay"; + }; + + spi2: spi@a6000000 { + status = "okay"; + }; + + usbd@e1100000 { + status = "okay"; + }; + + apb { + gpio0: gpio@fc980000 { + status = "okay"; + }; + + gpio@b3000000 { + status = "okay"; + }; + + i2c0: i2c@d0180000 { + status = "okay"; + + stmpe811@41 { + compatible = "st,stmpe811"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x41>; + irq-over-gpio; + irq-gpios = <&gpiopinctrl 29 0x4>; + id = <0>; + blocks = <0x5>; + irq-trigger = <0x1>; + + stmpegpio: stmpe-gpio { + compatible = "stmpe,gpio"; + reg = <0>; + gpio-controller; + #gpio-cells = <2>; + gpio,norequest-mask = <0xF3>; + }; + + stmpe610-ts { + compatible = "stmpe,ts"; + reg = <0>; + ts,sample-time = <4>; + ts,mod-12b = <1>; + ts,ref-sel = <0>; + ts,adc-freq = <1>; + ts,ave-ctrl = <1>; + ts,touch-det-delay = <3>; + ts,settling = <4>; + ts,fraction-z = <7>; + ts,i-drive = <1>; + }; + }; + }; + + i2c1: i2c@a7000000 { + status = "okay"; + }; + + rtc@fc900000 { + status = "okay"; + }; + + serial@d0000000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; + }; + + serial@a3000000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; + }; + + serial@a4000000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; + }; + + wdt@fc880000 { + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c index 707504b84e0e..66e3a0c33e75 100644 --- a/arch/arm/mach-spear3xx/spear320.c +++ b/arch/arm/mach-spear3xx/spear320.c @@ -247,6 +247,7 @@ static void __init spear320_dt_init(void) static const char * const spear320_dt_board_compat[] = { "st,spear320", "st,spear320-evb", + "st,spear320-hmi", NULL, }; From df1590d9ae5e37e07e7cf91107e4c2c946ce8bf4 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Mon, 12 Nov 2012 22:56:03 +0530 Subject: [PATCH 14/14] ARM: SPEAr3xx: Shirq: Move shirq controller out of plat/ This patch moves shirq interrupt controllers driver and header file out of plat-spear directory. It is moved to drivers/irqchip/ directory. Signed-off-by: Viresh Kumar --- arch/arm/mach-spear3xx/spear3xx.c | 2 +- arch/arm/plat-spear/Makefile | 2 +- drivers/irqchip/Makefile | 3 ++- .../shirq.c => drivers/irqchip/spear-shirq.c | 9 +++++---- .../shirq.h => include/linux/irqchip/spear-shirq.h | 10 ++++------ 5 files changed, 13 insertions(+), 13 deletions(-) rename arch/arm/plat-spear/shirq.c => drivers/irqchip/spear-shirq.c (97%) rename arch/arm/plat-spear/include/plat/shirq.h => include/linux/irqchip/spear-shirq.h (90%) diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c index f1aaf5b168b2..38fe95db31a7 100644 --- a/arch/arm/mach-spear3xx/spear3xx.c +++ b/arch/arm/mach-spear3xx/spear3xx.c @@ -15,12 +15,12 @@ #include #include +#include #include #include #include #include #include -#include #include #include diff --git a/arch/arm/plat-spear/Makefile b/arch/arm/plat-spear/Makefile index 2607bd05c525..01e88532a5db 100644 --- a/arch/arm/plat-spear/Makefile +++ b/arch/arm/plat-spear/Makefile @@ -5,5 +5,5 @@ # Common support obj-y := restart.o time.o -obj-$(CONFIG_ARCH_SPEAR3XX) += pl080.o shirq.o +obj-$(CONFIG_ARCH_SPEAR3XX) += pl080.o obj-$(CONFIG_ARCH_SPEAR6XX) += pl080.o diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile index 054321db4350..bf7b43696cdb 100644 --- a/drivers/irqchip/Makefile +++ b/drivers/irqchip/Makefile @@ -1 +1,2 @@ -obj-$(CONFIG_ARCH_BCM2835) += irq-bcm2835.o +obj-$(CONFIG_ARCH_BCM2835) += irq-bcm2835.o +obj-$(CONFIG_ARCH_SPEAR3XX) += spear-shirq.o diff --git a/arch/arm/plat-spear/shirq.c b/drivers/irqchip/spear-shirq.c similarity index 97% rename from arch/arm/plat-spear/shirq.c rename to drivers/irqchip/spear-shirq.c index 955c7249a5c1..80e1d2fd9d4c 100644 --- a/arch/arm/plat-spear/shirq.c +++ b/drivers/irqchip/spear-shirq.c @@ -1,11 +1,12 @@ /* - * arch/arm/plat-spear/shirq.c - * * SPEAr platform shared irq layer source file * - * Copyright (C) 2009 ST Microelectronics + * Copyright (C) 2009-2012 ST Microelectronics * Viresh Kumar * + * Copyright (C) 2012 ST Microelectronics + * Shiraz Hashim + * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. @@ -18,11 +19,11 @@ #include #include #include +#include #include #include #include #include -#include static DEFINE_SPINLOCK(lock); diff --git a/arch/arm/plat-spear/include/plat/shirq.h b/include/linux/irqchip/spear-shirq.h similarity index 90% rename from arch/arm/plat-spear/include/plat/shirq.h rename to include/linux/irqchip/spear-shirq.h index c51b355f00de..c8be16d213a3 100644 --- a/arch/arm/plat-spear/include/plat/shirq.h +++ b/include/linux/irqchip/spear-shirq.h @@ -1,9 +1,7 @@ /* - * arch/arm/plat-spear/include/plat/shirq.h - * * SPEAr platform shared irq layer header file * - * Copyright (C) 2009 ST Microelectronics + * Copyright (C) 2009-2012 ST Microelectronics * Viresh Kumar * * This file is licensed under the terms of the GNU General Public @@ -11,8 +9,8 @@ * warranty of any kind, whether express or implied. */ -#ifndef __PLAT_SHIRQ_H -#define __PLAT_SHIRQ_H +#ifndef __SPEAR_SHIRQ_H +#define __SPEAR_SHIRQ_H #include #include @@ -63,4 +61,4 @@ int __init spear310_shirq_of_init(struct device_node *np, int __init spear320_shirq_of_init(struct device_node *np, struct device_node *parent); -#endif /* __PLAT_SHIRQ_H */ +#endif /* __SPEAR_SHIRQ_H */