iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Some late GPIO fixes for the v5.9 series:

Browse Source 
- Fix compiler warnings on the OMAP when PM is disabled
 
 - Clear the interrupt when setting edge sensitivity on the
   Spreadtrum driver.
 
 - Fix up spurious interrupts on the TC35894.
 
 - Support threaded interrupts on the Siox controller.
 
 - Fix resource leaks on the mockup driver.
 
 - Fix line event handling in syscall compatible mode
   for the character device.
 
 - Fix an unitialized variable in the PCA953A driver.
 
 - Fix access to all GPIO IRQs on the Aspeed AST2600.
 
 - Fix line direction on the AMD FCH driver.
 
 - Use the bitmap API instead of compiler intrinsics for
   bit manipulation in the PCA953x driver.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAl928nQACgkQQRCzN7AZ
 XXNA2w//diOGCrrsGhnstCeSH1I0Aym26YjHtKaOhseJOxMjpdUGuhmUeJZo5hdR
 RmTcjPJTFROyiGAst/lQLXDt0FQSBnxm6mm0LEfTGjCErga5xqZ8l7WJNauJAlmt
 sia2SmRvN6gq5Bn1YcssNTiuDwoETbYHLfqHWP7tGMjjkpIkBjwdP5m2md4aA+jB
 JBZWqEBT1rxKw8Ksl37n/w4kuw3v/MioBy9VCV8XHEKEhOe15a0zejo6RM5OUpiV
 BxEz3HqsZa9FzXGwt+Es92XgxB8qvu3CQ++M4o1QDS5UZUGaZsUTCzqqbzbq/xFG
 zm2O3s/d0ZynwYpDy0CjBCuNNZPqeNMacp6Ad65rH5njw2rs79bI8W+aIZOOcqq8
 ft4hWKeUCMmLgsDW38+5hvXM8WPZTEQH1PZO1O2MWhSWS3tV2PYSqZCcYw895duD
 EPeGATs9zYt1DTysacaq+p2ZVd+NAgXwApMfNdpZh93igYBM6fdaZ+nd88tEfQCf
 wIVW4mtM7+Om+Jcm2XFYVKbUjQtNrMygQO19DpHig9K5PcXyRS93gavbPrNQ6gId
 21R8mtUNH1qiPU7/oFFnld4NKYYabdelEoS8EFebDlU4VHSvCQturXBMvhtEc9YE
 uaquBC1zG42zk3ZjH9/b00hf+TGfcfC26eVa3OavFDytlvwLJXo=
 =295T
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO fixes from Linus Walleij:
 "Some late GPIO fixes for the v5.9 series:

   - Fix compiler warnings on the OMAP when PM is disabled

   - Clear the interrupt when setting edge sensitivity on the Spreadtrum
     driver.

   - Fix up spurious interrupts on the TC35894.

   - Support threaded interrupts on the Siox controller.

   - Fix resource leaks on the mockup driver.

   - Fix line event handling in syscall compatible mode for the
     character device.

   - Fix an unitialized variable in the PCA953A driver.

   - Fix access to all GPIO IRQs on the Aspeed AST2600.

   - Fix line direction on the AMD FCH driver.

   - Use the bitmap API instead of compiler intrinsics for bit
     manipulation in the PCA953x driver"

* tag 'gpio-v5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: pca953x: Correctly initialize registers 6 and 7 for PCA957x
  gpio: pca953x: Use bitmap API over implicit GCC extension
  gpio: amd-fch: correct logic of GPIO_LINE_DIRECTION
  gpio: aspeed: fix ast2600 bank properties
  gpio/aspeed-sgpio: don't enable all interrupts by default
  gpio/aspeed-sgpio: enable access to all 80 input & output sgpios
  gpio: pca953x: Fix uninitialized pending variable
  gpiolib: Fix line event handling in syscall compatible mode
  gpio: mockup: fix resource leak in error path
  gpio: siox: explicitly support only threaded irqs
  gpio: tc35894: fix up tc35894 interrupt configuration
  gpio: sprd: Clear interrupt when setting the type as edge
  gpio: omap: Fix warnings if PM is disabled
This commit is contained in:
Linus Torvalds 2020-10-02 09:51:42 -07:00
commit 0bf0dfda00
11 changed files with 138 additions and 60 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
Documentation/devicetree/bindings/gpio/sgpio-aspeed.txt
View File

@ -20,8 +20,9 @@ Required properties:
- gpio-controller : Marks the device node as a GPIO controller
- interrupts : Interrupt specifier, see interrupt-controller/interrupts.txt
- interrupt-controller : Mark the GPIO controller as an interrupt-controller
- ngpios : number of GPIO lines, see gpio.txt
(should be multiple of 8, up to 80 pins)
- ngpios : number of *hardware* GPIO lines, see gpio.txt. This will expose
2 software GPIOs per hardware GPIO: one for hardware input, one for hardware
output. Up to 80 pins, must be a multiple of 8.
- clocks : A phandle to the APB clock for SGPM clock division
- bus-frequency : SGPM CLK frequency

2
drivers/gpio/gpio-amd-fch.c
View File

@ -92,7 +92,7 @@ static int amd_fch_gpio_get_direction(struct gpio_chip *gc, unsigned int gpio)
ret = (readl_relaxed(ptr) & AMD_FCH_GPIO_FLAG_DIRECTION);
spin_unlock_irqrestore(&priv->lock, flags);
return ret ? GPIO_LINE_DIRECTION_IN : GPIO_LINE_DIRECTION_OUT;
return ret ? GPIO_LINE_DIRECTION_OUT : GPIO_LINE_DIRECTION_IN;
}
static void amd_fch_gpio_set(struct gpio_chip *gc,

134
drivers/gpio/gpio-aspeed-sgpio.c
View File

@ -17,7 +17,17 @@
#include <linux/spinlock.h>
#include <linux/string.h>
#define MAX_NR_SGPIO 80
/*
* MAX_NR_HW_GPIO represents the number of actual hardware-supported GPIOs (ie,
* slots within the clocked serial GPIO data). Since each HW GPIO is both an
* input and an output, we provide MAX_NR_HW_GPIO * 2 lines on our gpiochip
* device.
*
* We use SGPIO_OUTPUT_OFFSET to define the split between the inputs and
* outputs; the inputs start at line 0, the outputs start at OUTPUT_OFFSET.
*/
#define MAX_NR_HW_SGPIO 80
#define SGPIO_OUTPUT_OFFSET MAX_NR_HW_SGPIO
#define ASPEED_SGPIO_CTRL 0x54
@ -30,8 +40,8 @@ struct aspeed_sgpio {
struct clk *pclk;
spinlock_t lock;
void __iomem *base;
uint32_t dir_in[3];
int irq;
int n_sgpio;
};
struct aspeed_sgpio_bank {
@ -111,31 +121,69 @@ static void __iomem *bank_reg(struct aspeed_sgpio *gpio,
}
}
#define GPIO_BANK(x) ((x) >> 5)
#define GPIO_OFFSET(x) ((x) & 0x1f)
#define GPIO_BANK(x) ((x % SGPIO_OUTPUT_OFFSET) >> 5)
#define GPIO_OFFSET(x) ((x % SGPIO_OUTPUT_OFFSET) & 0x1f)
#define GPIO_BIT(x) BIT(GPIO_OFFSET(x))
static const struct aspeed_sgpio_bank *to_bank(unsigned int offset)
{
unsigned int bank = GPIO_BANK(offset);
unsigned int bank;
bank = GPIO_BANK(offset);
WARN_ON(bank >= ARRAY_SIZE(aspeed_sgpio_banks));
return &aspeed_sgpio_banks[bank];
}
static int aspeed_sgpio_init_valid_mask(struct gpio_chip *gc,
unsigned long *valid_mask, unsigned int ngpios)
{
struct aspeed_sgpio *sgpio = gpiochip_get_data(gc);
int n = sgpio->n_sgpio;
int c = SGPIO_OUTPUT_OFFSET - n;
WARN_ON(ngpios < MAX_NR_HW_SGPIO * 2);
/* input GPIOs in the lower range */
bitmap_set(valid_mask, 0, n);
bitmap_clear(valid_mask, n, c);
/* output GPIOS above SGPIO_OUTPUT_OFFSET */
bitmap_set(valid_mask, SGPIO_OUTPUT_OFFSET, n);
bitmap_clear(valid_mask, SGPIO_OUTPUT_OFFSET + n, c);
return 0;
}
static void aspeed_sgpio_irq_init_valid_mask(struct gpio_chip *gc,
unsigned long *valid_mask, unsigned int ngpios)
{
struct aspeed_sgpio *sgpio = gpiochip_get_data(gc);
int n = sgpio->n_sgpio;
WARN_ON(ngpios < MAX_NR_HW_SGPIO * 2);
/* input GPIOs in the lower range */
bitmap_set(valid_mask, 0, n);
bitmap_clear(valid_mask, n, ngpios - n);
}
static bool aspeed_sgpio_is_input(unsigned int offset)
{
return offset < SGPIO_OUTPUT_OFFSET;
}
static int aspeed_sgpio_get(struct gpio_chip *gc, unsigned int offset)
{
struct aspeed_sgpio *gpio = gpiochip_get_data(gc);
const struct aspeed_sgpio_bank *bank = to_bank(offset);
unsigned long flags;
enum aspeed_sgpio_reg reg;
bool is_input;
int rc = 0;
spin_lock_irqsave(&gpio->lock, flags);
is_input = gpio->dir_in[GPIO_BANK(offset)] & GPIO_BIT(offset);
reg = is_input ? reg_val : reg_rdata;
reg = aspeed_sgpio_is_input(offset) ? reg_val : reg_rdata;
rc = !!(ioread32(bank_reg(gpio, bank, reg)) & GPIO_BIT(offset));
spin_unlock_irqrestore(&gpio->lock, flags);
@ -143,22 +191,31 @@ static int aspeed_sgpio_get(struct gpio_chip *gc, unsigned int offset)
return rc;
}
static void sgpio_set_value(struct gpio_chip *gc, unsigned int offset, int val)
static int sgpio_set_value(struct gpio_chip *gc, unsigned int offset, int val)
{
struct aspeed_sgpio *gpio = gpiochip_get_data(gc);
const struct aspeed_sgpio_bank *bank = to_bank(offset);
void __iomem *addr;
void __iomem *addr_r, *addr_w;
u32 reg = 0;
addr = bank_reg(gpio, bank, reg_val);
reg = ioread32(addr);
if (aspeed_sgpio_is_input(offset))
return -EINVAL;
/* Since this is an output, read the cached value from rdata, then
* update val. */
addr_r = bank_reg(gpio, bank, reg_rdata);
addr_w = bank_reg(gpio, bank, reg_val);
reg = ioread32(addr_r);
if (val)
reg |= GPIO_BIT(offset);
else
reg &= ~GPIO_BIT(offset);
iowrite32(reg, addr);
iowrite32(reg, addr_w);
return 0;
}
static void aspeed_sgpio_set(struct gpio_chip *gc, unsigned int offset, int val)
@ -175,43 +232,28 @@ static void aspeed_sgpio_set(struct gpio_chip *gc, unsigned int offset, int val)
static int aspeed_sgpio_dir_in(struct gpio_chip *gc, unsigned int offset)
{
struct aspeed_sgpio *gpio = gpiochip_get_data(gc);
unsigned long flags;
spin_lock_irqsave(&gpio->lock, flags);
gpio->dir_in[GPIO_BANK(offset)] |= GPIO_BIT(offset);
spin_unlock_irqrestore(&gpio->lock, flags);
return 0;
return aspeed_sgpio_is_input(offset) ? 0 : -EINVAL;
}
static int aspeed_sgpio_dir_out(struct gpio_chip *gc, unsigned int offset, int val)
{
struct aspeed_sgpio *gpio = gpiochip_get_data(gc);
unsigned long flags;
int rc;
/* No special action is required for setting the direction; we'll
* error-out in sgpio_set_value if this isn't an output GPIO */
spin_lock_irqsave(&gpio->lock, flags);
gpio->dir_in[GPIO_BANK(offset)] &= ~GPIO_BIT(offset);
sgpio_set_value(gc, offset, val);
rc = sgpio_set_value(gc, offset, val);
spin_unlock_irqrestore(&gpio->lock, flags);
return 0;
return rc;
}
static int aspeed_sgpio_get_direction(struct gpio_chip *gc, unsigned int offset)
{
int dir_status;
struct aspeed_sgpio *gpio = gpiochip_get_data(gc);
unsigned long flags;
spin_lock_irqsave(&gpio->lock, flags);
dir_status = gpio->dir_in[GPIO_BANK(offset)] & GPIO_BIT(offset);
spin_unlock_irqrestore(&gpio->lock, flags);
return dir_status;
return !!aspeed_sgpio_is_input(offset);
}
static void irqd_to_aspeed_sgpio_data(struct irq_data *d,
@ -402,6 +444,7 @@ static int aspeed_sgpio_setup_irqs(struct aspeed_sgpio *gpio,
irq = &gpio->chip.irq;
irq->chip = &aspeed_sgpio_irqchip;
irq->init_valid_mask = aspeed_sgpio_irq_init_valid_mask;
irq->handler = handle_bad_irq;
irq->default_type = IRQ_TYPE_NONE;
irq->parent_handler = aspeed_sgpio_irq_handler;
@ -409,17 +452,15 @@ static int aspeed_sgpio_setup_irqs(struct aspeed_sgpio *gpio,
irq->parents = &gpio->irq;
irq->num_parents = 1;
/* set IRQ settings and Enable Interrupt */
/* Apply default IRQ settings */
for (i = 0; i < ARRAY_SIZE(aspeed_sgpio_banks); i++) {
bank = &aspeed_sgpio_banks[i];
/* set falling or level-low irq */
iowrite32(0x00000000, bank_reg(gpio, bank, reg_irq_type0));
/* trigger type is edge */
iowrite32(0x00000000, bank_reg(gpio, bank, reg_irq_type1));
/* dual edge trigger mode. */
iowrite32(0xffffffff, bank_reg(gpio, bank, reg_irq_type2));
/* enable irq */
iowrite32(0xffffffff, bank_reg(gpio, bank, reg_irq_enable));
/* single edge trigger */
iowrite32(0x00000000, bank_reg(gpio, bank, reg_irq_type2));
}
return 0;
@ -452,11 +493,12 @@ static int __init aspeed_sgpio_probe(struct platform_device *pdev)
if (rc < 0) {
dev_err(&pdev->dev, "Could not read ngpios property\n");
return -EINVAL;
} else if (nr_gpios > MAX_NR_SGPIO) {
} else if (nr_gpios > MAX_NR_HW_SGPIO) {
dev_err(&pdev->dev, "Number of GPIOs exceeds the maximum of %d: %d\n",
MAX_NR_SGPIO, nr_gpios);
MAX_NR_HW_SGPIO, nr_gpios);
return -EINVAL;
}
gpio->n_sgpio = nr_gpios;
rc = of_property_read_u32(pdev->dev.of_node, "bus-frequency", &sgpio_freq);
if (rc < 0) {
@ -497,7 +539,8 @@ static int __init aspeed_sgpio_probe(struct platform_device *pdev)
spin_lock_init(&gpio->lock);
gpio->chip.parent = &pdev->dev;
gpio->chip.ngpio = nr_gpios;
gpio->chip.ngpio = MAX_NR_HW_SGPIO * 2;
gpio->chip.init_valid_mask = aspeed_sgpio_init_valid_mask;
gpio->chip.direction_input = aspeed_sgpio_dir_in;
gpio->chip.direction_output = aspeed_sgpio_dir_out;
gpio->chip.get_direction = aspeed_sgpio_get_direction;
@ -509,9 +552,6 @@ static int __init aspeed_sgpio_probe(struct platform_device *pdev)
gpio->chip.label = dev_name(&pdev->dev);
gpio->chip.base = -1;
/* set all SGPIO pins as input (1). */
memset(gpio->dir_in, 0xff, sizeof(gpio->dir_in));
aspeed_sgpio_setup_irqs(gpio, pdev);
rc = devm_gpiochip_add_data(&pdev->dev, &gpio->chip, gpio);

4
drivers/gpio/gpio-aspeed.c
View File

@ -1114,8 +1114,8 @@ static const struct aspeed_gpio_config ast2500_config =
static const struct aspeed_bank_props ast2600_bank_props[] = {
/* input output */
{5, 0xffffffff, 0x0000ffff}, /* U/V/W/X */
{6, 0xffff0000, 0x0fff0000}, /* Y/Z */
{5, 0xffffffff, 0xffffff00}, /* U/V/W/X */
{6, 0x0000ffff, 0x0000ffff}, /* Y/Z */
{ },
};

2
drivers/gpio/gpio-mockup.c
View File

@ -552,6 +552,7 @@ static int __init gpio_mockup_init(void)
err = platform_driver_register(&gpio_mockup_driver);
if (err) {
gpio_mockup_err("error registering platform driver\n");
debugfs_remove_recursive(gpio_mockup_dbg_dir);
return err;
}
@ -582,6 +583,7 @@ static int __init gpio_mockup_init(void)
gpio_mockup_err("error registering device");
platform_driver_unregister(&gpio_mockup_driver);
gpio_mockup_unregister_pdevs();
debugfs_remove_recursive(gpio_mockup_dbg_dir);
return PTR_ERR(pdev);
}

4
drivers/gpio/gpio-omap.c
View File

@ -1516,7 +1516,7 @@ static int __maybe_unused omap_gpio_runtime_resume(struct device *dev)
return 0;
}
static int omap_gpio_suspend(struct device *dev)
static int __maybe_unused omap_gpio_suspend(struct device *dev)
{
struct gpio_bank *bank = dev_get_drvdata(dev);
@ -1528,7 +1528,7 @@ static int omap_gpio_suspend(struct device *dev)
return omap_gpio_runtime_suspend(dev);
}
static int omap_gpio_resume(struct device *dev)
static int __maybe_unused omap_gpio_resume(struct device *dev)
{
struct gpio_bank *bank = dev_get_drvdata(dev);

7
drivers/gpio/gpio-pca953x.c
View File

@ -818,6 +818,8 @@ static irqreturn_t pca953x_irq_handler(int irq, void *devid)
int level;
bool ret;
bitmap_zero(pending, MAX_LINE);
mutex_lock(&chip->i2c_lock);
ret = pca953x_irq_pending(chip, pending);
mutex_unlock(&chip->i2c_lock);
@ -940,6 +942,7 @@ out:
static int device_pca957x_init(struct pca953x_chip *chip, u32 invert)
{
DECLARE_BITMAP(val, MAX_LINE);
unsigned int i;
int ret;
ret = device_pca95xx_init(chip, invert);
@ -947,7 +950,9 @@ static int device_pca957x_init(struct pca953x_chip *chip, u32 invert)
goto out;
/* To enable register 6, 7 to control pull up and pull down */
memset(val, 0x02, NBANK(chip));
for (i = 0; i < NBANK(chip); i++)
bitmap_set_value8(val, 0x02, i * BANK_SZ);
ret = pca953x_write_regs(chip, PCA957X_BKEN, val);
if (ret)
goto out;

1
drivers/gpio/gpio-siox.c
View File

@ -245,6 +245,7 @@ static int gpio_siox_probe(struct siox_device *sdevice)
girq->chip = &ddata->ichip;
girq->default_type = IRQ_TYPE_NONE;
girq->handler = handle_level_irq;
girq->threaded = true;
ret = devm_gpiochip_add_data(dev, &ddata->gchip, NULL);
if (ret)

3
drivers/gpio/gpio-sprd.c
View File

@ -149,17 +149,20 @@ static int sprd_gpio_irq_set_type(struct irq_data *data,
sprd_gpio_update(chip, offset, SPRD_GPIO_IS, 0);
sprd_gpio_update(chip, offset, SPRD_GPIO_IBE, 0);
sprd_gpio_update(chip, offset, SPRD_GPIO_IEV, 1);
sprd_gpio_update(chip, offset, SPRD_GPIO_IC, 1);
irq_set_handler_locked(data, handle_edge_irq);
break;
case IRQ_TYPE_EDGE_FALLING:
sprd_gpio_update(chip, offset, SPRD_GPIO_IS, 0);
sprd_gpio_update(chip, offset, SPRD_GPIO_IBE, 0);
sprd_gpio_update(chip, offset, SPRD_GPIO_IEV, 0);
sprd_gpio_update(chip, offset, SPRD_GPIO_IC, 1);
irq_set_handler_locked(data, handle_edge_irq);
break;
case IRQ_TYPE_EDGE_BOTH:
sprd_gpio_update(chip, offset, SPRD_GPIO_IS, 0);
sprd_gpio_update(chip, offset, SPRD_GPIO_IBE, 1);
sprd_gpio_update(chip, offset, SPRD_GPIO_IC, 1);
irq_set_handler_locked(data, handle_edge_irq);
break;
case IRQ_TYPE_LEVEL_HIGH:

2
drivers/gpio/gpio-tc3589x.c
View File

@ -212,7 +212,7 @@ static void tc3589x_gpio_irq_sync_unlock(struct irq_data *d)
continue;
tc3589x_gpio->oldregs[i][j] = new;
tc3589x_reg_write(tc3589x, regmap[i] + j * 8, new);
tc3589x_reg_write(tc3589x, regmap[i] + j, new);
}
}

34
drivers/gpio/gpiolib-cdev.c
View File

@ -423,6 +423,21 @@ static __poll_t lineevent_poll(struct file *file,
return events;
}
static ssize_t lineevent_get_size(void)
{
#ifdef __x86_64__
/* i386 has no padding after 'id' */
if (in_ia32_syscall()) {
struct compat_gpioeevent_data {
compat_u64 timestamp;
u32 id;
};
return sizeof(struct compat_gpioeevent_data);
}
#endif
return sizeof(struct gpioevent_data);
}
static ssize_t lineevent_read(struct file *file,
char __user *buf,
@ -432,9 +447,20 @@ static ssize_t lineevent_read(struct file *file,
struct lineevent_state *le = file->private_data;
struct gpioevent_data ge;
ssize_t bytes_read = 0;
ssize_t ge_size;
int ret;
if (count < sizeof(ge))
/*
* When compatible system call is being used the struct gpioevent_data,
* in case of at least ia32, has different size due to the alignment
* differences. Because we have first member 64 bits followed by one of
* 32 bits there is no gap between them. The only difference is the
* padding at the end of the data structure. Hence, we calculate the
* actual sizeof() and pass this as an argument to copy_to_user() to
* drop unneeded bytes from the output.
*/
ge_size = lineevent_get_size();
if (count < ge_size)
return -EINVAL;
do {
@ -470,10 +496,10 @@ static ssize_t lineevent_read(struct file *file,
break;
}
if (copy_to_user(buf + bytes_read, &ge, sizeof(ge)))
if (copy_to_user(buf + bytes_read, &ge, ge_size))
return -EFAULT;
bytes_read += sizeof(ge);
} while (count >= bytes_read + sizeof(ge));
bytes_read += ge_size;
} while (count >= bytes_read + ge_size);
return bytes_read;
}