Merge branch 'dsa-felix-fixes'
Vladimir Oltean says: ==================== Fixes for Felix DSA driver calculation of tc-taprio guard bands This series fixes some bugs which are not quite new, but date from v5.13 when static guard bands were enabled by Michael Walle to prevent tc-taprio overruns. The investigation started when Xiaoliang asked privately what is the expected max SDU for a traffic class when its minimum gate interval is 10 us. The answer, as it turns out, is not an L1 size of 1250 octets, but 1245 octets, since otherwise, the switch will not consider frames for egress scheduling, because the static guard band is exactly as large as the time interval. The switch needs a minimum of 33 ns outside of the guard band to consider a frame for scheduling, and the reduction of the max SDU by 5 provides exactly for that. The fix for that (patch 1/3) is relatively small, but during testing, it became apparent that cut-through forwarding prevents oversized frame dropping from working properly. This is solved through the larger patch 2/3. Finally, patch 3/3 fixes one more tc-taprio locking problem found through code inspection. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
commit
0f51fa2a3c
@ -22,6 +22,7 @@
|
||||
#define VSC9959_NUM_PORTS 6
|
||||
|
||||
#define VSC9959_TAS_GCL_ENTRY_MAX 63
|
||||
#define VSC9959_TAS_MIN_GATE_LEN_NS 33
|
||||
#define VSC9959_VCAP_POLICER_BASE 63
|
||||
#define VSC9959_VCAP_POLICER_MAX 383
|
||||
#define VSC9959_SWITCH_PCI_BAR 4
|
||||
@ -1478,6 +1479,23 @@ static void vsc9959_mdio_bus_free(struct ocelot *ocelot)
|
||||
mdiobus_free(felix->imdio);
|
||||
}
|
||||
|
||||
/* The switch considers any frame (regardless of size) as eligible for
|
||||
* transmission if the traffic class gate is open for at least 33 ns.
|
||||
* Overruns are prevented by cropping an interval at the end of the gate time
|
||||
* slot for which egress scheduling is blocked, but we need to still keep 33 ns
|
||||
* available for one packet to be transmitted, otherwise the port tc will hang.
|
||||
* This function returns the size of a gate interval that remains available for
|
||||
* setting the guard band, after reserving the space for one egress frame.
|
||||
*/
|
||||
static u64 vsc9959_tas_remaining_gate_len_ps(u64 gate_len_ns)
|
||||
{
|
||||
/* Gate always open */
|
||||
if (gate_len_ns == U64_MAX)
|
||||
return U64_MAX;
|
||||
|
||||
return (gate_len_ns - VSC9959_TAS_MIN_GATE_LEN_NS) * PSEC_PER_NSEC;
|
||||
}
|
||||
|
||||
/* Extract shortest continuous gate open intervals in ns for each traffic class
|
||||
* of a cyclic tc-taprio schedule. If a gate is always open, the duration is
|
||||
* considered U64_MAX. If the gate is always closed, it is considered 0.
|
||||
@ -1539,6 +1557,65 @@ static void vsc9959_tas_min_gate_lengths(struct tc_taprio_qopt_offload *taprio,
|
||||
min_gate_len[tc] = 0;
|
||||
}
|
||||
|
||||
/* ocelot_write_rix is a macro that concatenates QSYS_MAXSDU_CFG_* with _RSZ,
|
||||
* so we need to spell out the register access to each traffic class in helper
|
||||
* functions, to simplify callers
|
||||
*/
|
||||
static void vsc9959_port_qmaxsdu_set(struct ocelot *ocelot, int port, int tc,
|
||||
u32 max_sdu)
|
||||
{
|
||||
switch (tc) {
|
||||
case 0:
|
||||
ocelot_write_rix(ocelot, max_sdu, QSYS_QMAXSDU_CFG_0,
|
||||
port);
|
||||
break;
|
||||
case 1:
|
||||
ocelot_write_rix(ocelot, max_sdu, QSYS_QMAXSDU_CFG_1,
|
||||
port);
|
||||
break;
|
||||
case 2:
|
||||
ocelot_write_rix(ocelot, max_sdu, QSYS_QMAXSDU_CFG_2,
|
||||
port);
|
||||
break;
|
||||
case 3:
|
||||
ocelot_write_rix(ocelot, max_sdu, QSYS_QMAXSDU_CFG_3,
|
||||
port);
|
||||
break;
|
||||
case 4:
|
||||
ocelot_write_rix(ocelot, max_sdu, QSYS_QMAXSDU_CFG_4,
|
||||
port);
|
||||
break;
|
||||
case 5:
|
||||
ocelot_write_rix(ocelot, max_sdu, QSYS_QMAXSDU_CFG_5,
|
||||
port);
|
||||
break;
|
||||
case 6:
|
||||
ocelot_write_rix(ocelot, max_sdu, QSYS_QMAXSDU_CFG_6,
|
||||
port);
|
||||
break;
|
||||
case 7:
|
||||
ocelot_write_rix(ocelot, max_sdu, QSYS_QMAXSDU_CFG_7,
|
||||
port);
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
static u32 vsc9959_port_qmaxsdu_get(struct ocelot *ocelot, int port, int tc)
|
||||
{
|
||||
switch (tc) {
|
||||
case 0: return ocelot_read_rix(ocelot, QSYS_QMAXSDU_CFG_0, port);
|
||||
case 1: return ocelot_read_rix(ocelot, QSYS_QMAXSDU_CFG_1, port);
|
||||
case 2: return ocelot_read_rix(ocelot, QSYS_QMAXSDU_CFG_2, port);
|
||||
case 3: return ocelot_read_rix(ocelot, QSYS_QMAXSDU_CFG_3, port);
|
||||
case 4: return ocelot_read_rix(ocelot, QSYS_QMAXSDU_CFG_4, port);
|
||||
case 5: return ocelot_read_rix(ocelot, QSYS_QMAXSDU_CFG_5, port);
|
||||
case 6: return ocelot_read_rix(ocelot, QSYS_QMAXSDU_CFG_6, port);
|
||||
case 7: return ocelot_read_rix(ocelot, QSYS_QMAXSDU_CFG_7, port);
|
||||
default:
|
||||
return 0;
|
||||
}
|
||||
}
|
||||
|
||||
/* Update QSYS_PORT_MAX_SDU to make sure the static guard bands added by the
|
||||
* switch (see the ALWAYS_GUARD_BAND_SCH_Q comment) are correct at all MTU
|
||||
* values (the default value is 1518). Also, for traffic class windows smaller
|
||||
@ -1595,11 +1672,16 @@ static void vsc9959_tas_guard_bands_update(struct ocelot *ocelot, int port)
|
||||
|
||||
vsc9959_tas_min_gate_lengths(ocelot_port->taprio, min_gate_len);
|
||||
|
||||
mutex_lock(&ocelot->fwd_domain_lock);
|
||||
|
||||
for (tc = 0; tc < OCELOT_NUM_TC; tc++) {
|
||||
u64 remaining_gate_len_ps;
|
||||
u32 max_sdu;
|
||||
|
||||
if (min_gate_len[tc] == U64_MAX /* Gate always open */ ||
|
||||
min_gate_len[tc] * PSEC_PER_NSEC > needed_bit_time_ps) {
|
||||
remaining_gate_len_ps =
|
||||
vsc9959_tas_remaining_gate_len_ps(min_gate_len[tc]);
|
||||
|
||||
if (remaining_gate_len_ps > needed_bit_time_ps) {
|
||||
/* Setting QMAXSDU_CFG to 0 disables oversized frame
|
||||
* dropping.
|
||||
*/
|
||||
@ -1612,9 +1694,15 @@ static void vsc9959_tas_guard_bands_update(struct ocelot *ocelot, int port)
|
||||
/* If traffic class doesn't support a full MTU sized
|
||||
* frame, make sure to enable oversize frame dropping
|
||||
* for frames larger than the smallest that would fit.
|
||||
*
|
||||
* However, the exact same register, QSYS_QMAXSDU_CFG_*,
|
||||
* controls not only oversized frame dropping, but also
|
||||
* per-tc static guard band lengths, so it reduces the
|
||||
* useful gate interval length. Therefore, be careful
|
||||
* to calculate a guard band (and therefore max_sdu)
|
||||
* that still leaves 33 ns available in the time slot.
|
||||
*/
|
||||
max_sdu = div_u64(min_gate_len[tc] * PSEC_PER_NSEC,
|
||||
picos_per_byte);
|
||||
max_sdu = div_u64(remaining_gate_len_ps, picos_per_byte);
|
||||
/* A TC gate may be completely closed, which is a
|
||||
* special case where all packets are oversized.
|
||||
* Any limit smaller than 64 octets accomplishes this
|
||||
@ -1637,47 +1725,14 @@ static void vsc9959_tas_guard_bands_update(struct ocelot *ocelot, int port)
|
||||
max_sdu);
|
||||
}
|
||||
|
||||
/* ocelot_write_rix is a macro that concatenates
|
||||
* QSYS_MAXSDU_CFG_* with _RSZ, so we need to spell out
|
||||
* the writes to each traffic class
|
||||
*/
|
||||
switch (tc) {
|
||||
case 0:
|
||||
ocelot_write_rix(ocelot, max_sdu, QSYS_QMAXSDU_CFG_0,
|
||||
port);
|
||||
break;
|
||||
case 1:
|
||||
ocelot_write_rix(ocelot, max_sdu, QSYS_QMAXSDU_CFG_1,
|
||||
port);
|
||||
break;
|
||||
case 2:
|
||||
ocelot_write_rix(ocelot, max_sdu, QSYS_QMAXSDU_CFG_2,
|
||||
port);
|
||||
break;
|
||||
case 3:
|
||||
ocelot_write_rix(ocelot, max_sdu, QSYS_QMAXSDU_CFG_3,
|
||||
port);
|
||||
break;
|
||||
case 4:
|
||||
ocelot_write_rix(ocelot, max_sdu, QSYS_QMAXSDU_CFG_4,
|
||||
port);
|
||||
break;
|
||||
case 5:
|
||||
ocelot_write_rix(ocelot, max_sdu, QSYS_QMAXSDU_CFG_5,
|
||||
port);
|
||||
break;
|
||||
case 6:
|
||||
ocelot_write_rix(ocelot, max_sdu, QSYS_QMAXSDU_CFG_6,
|
||||
port);
|
||||
break;
|
||||
case 7:
|
||||
ocelot_write_rix(ocelot, max_sdu, QSYS_QMAXSDU_CFG_7,
|
||||
port);
|
||||
break;
|
||||
}
|
||||
vsc9959_port_qmaxsdu_set(ocelot, port, tc, max_sdu);
|
||||
}
|
||||
|
||||
ocelot_write_rix(ocelot, maxlen, QSYS_PORT_MAX_SDU, port);
|
||||
|
||||
ocelot->ops->cut_through_fwd(ocelot);
|
||||
|
||||
mutex_unlock(&ocelot->fwd_domain_lock);
|
||||
}
|
||||
|
||||
static void vsc9959_sched_speed_set(struct ocelot *ocelot, int port,
|
||||
@ -1704,13 +1759,13 @@ static void vsc9959_sched_speed_set(struct ocelot *ocelot, int port,
|
||||
break;
|
||||
}
|
||||
|
||||
mutex_lock(&ocelot->tas_lock);
|
||||
|
||||
ocelot_rmw_rix(ocelot,
|
||||
QSYS_TAG_CONFIG_LINK_SPEED(tas_speed),
|
||||
QSYS_TAG_CONFIG_LINK_SPEED_M,
|
||||
QSYS_TAG_CONFIG, port);
|
||||
|
||||
mutex_lock(&ocelot->tas_lock);
|
||||
|
||||
if (ocelot_port->taprio)
|
||||
vsc9959_tas_guard_bands_update(ocelot, port);
|
||||
|
||||
@ -2770,7 +2825,7 @@ static void vsc9959_cut_through_fwd(struct ocelot *ocelot)
|
||||
{
|
||||
struct felix *felix = ocelot_to_felix(ocelot);
|
||||
struct dsa_switch *ds = felix->ds;
|
||||
int port, other_port;
|
||||
int tc, port, other_port;
|
||||
|
||||
lockdep_assert_held(&ocelot->fwd_domain_lock);
|
||||
|
||||
@ -2814,19 +2869,27 @@ static void vsc9959_cut_through_fwd(struct ocelot *ocelot)
|
||||
min_speed = other_ocelot_port->speed;
|
||||
}
|
||||
|
||||
/* Enable cut-through forwarding for all traffic classes. */
|
||||
if (ocelot_port->speed == min_speed)
|
||||
/* Enable cut-through forwarding for all traffic classes that
|
||||
* don't have oversized dropping enabled, since this check is
|
||||
* bypassed in cut-through mode.
|
||||
*/
|
||||
if (ocelot_port->speed == min_speed) {
|
||||
val = GENMASK(7, 0);
|
||||
|
||||
for (tc = 0; tc < OCELOT_NUM_TC; tc++)
|
||||
if (vsc9959_port_qmaxsdu_get(ocelot, port, tc))
|
||||
val &= ~BIT(tc);
|
||||
}
|
||||
|
||||
set:
|
||||
tmp = ocelot_read_rix(ocelot, ANA_CUT_THRU_CFG, port);
|
||||
if (tmp == val)
|
||||
continue;
|
||||
|
||||
dev_dbg(ocelot->dev,
|
||||
"port %d fwd mask 0x%lx speed %d min_speed %d, %s cut-through forwarding\n",
|
||||
"port %d fwd mask 0x%lx speed %d min_speed %d, %s cut-through forwarding on TC mask 0x%x\n",
|
||||
port, mask, ocelot_port->speed, min_speed,
|
||||
val ? "enabling" : "disabling");
|
||||
val ? "enabling" : "disabling", val);
|
||||
|
||||
ocelot_write_rix(ocelot, val, ANA_CUT_THRU_CFG, port);
|
||||
}
|
||||
|
Loading…
Reference in New Issue
Block a user