spi: bcm53xx: driver for SPI controller on Broadcom bcma SoC
Broadcom 53xx ARM SoCs use bcma bus that contains various cores (AKA devices). If board has a serial flash, it's connected over SPI and the bcma bus includes a SPI controller. Example log from such a board: bus0: Found chip with id 53010, rev 0x00 and package 0x02 (...) bus0: Core 18 found: SPI flash controller (manuf 0x4BF, id 0x50A, rev 0x01, class 0x0) This patch adds a bcma driver for SPI core, it registers SPI master controller and "bcm53xxspiflash" SPI device. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Mark Brown <broonie@linaro.org>
This commit is contained in:
Rafał Miłecki
Mark Brown
parent
7d1311b93e
commit
0fc6a323e1
@ -112,6 +112,12 @@ config SPI_AU1550
|
||||
If you say yes to this option, support will be included for the
|
||||
PSC SPI controller found on Au1550, Au1200 and Au1300 series.
|
||||
|
||||
config SPI_BCM53XX
|
||||
tristate "Broadcom BCM53xx SPI controller"
|
||||
depends on ARCH_BCM_5301X
|
||||
help
|
||||
Enable support for the SPI controller on Broadcom BCM53xx ARM SoCs.
|
||||
|
||||
config SPI_BCM63XX
|
||||
tristate "Broadcom BCM63xx SPI controller"
|
||||
depends on BCM63XX
|
||||
|
||||
@ -15,6 +15,7 @@ obj-$(CONFIG_SPI_ATMEL) += spi-atmel.o
|
||||
obj-$(CONFIG_SPI_ATH79) += spi-ath79.o
|
||||
obj-$(CONFIG_SPI_AU1550) += spi-au1550.o
|
||||
obj-$(CONFIG_SPI_BCM2835) += spi-bcm2835.o
|
||||
obj-$(CONFIG_SPI_BCM53XX) += spi-bcm53xx.o
|
||||
obj-$(CONFIG_SPI_BCM63XX) += spi-bcm63xx.o
|
||||
obj-$(CONFIG_SPI_BCM63XX_HSSPI) += spi-bcm63xx-hsspi.o
|
||||
obj-$(CONFIG_SPI_BFIN5XX) += spi-bfin5xx.o
|
||||
|
||||
295
drivers/spi/spi-bcm53xx.c
Normal file
295
drivers/spi/spi-bcm53xx.c
Normal file
@ -0,0 +1,295 @@
|
||||
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/bcma/bcma.h>
|
||||
#include <linux/spi/spi.h>
|
||||
|
||||
#include "spi-bcm53xx.h"
|
||||
|
||||
#define BCM53XXSPI_MAX_SPI_BAUD 13500000 /* 216 MHz? */
|
||||
|
||||
/* The longest observed required wait was 19 ms */
|
||||
#define BCM53XXSPI_SPE_TIMEOUT_MS 80
|
||||
|
||||
struct bcm53xxspi {
|
||||
struct bcma_device *core;
|
||||
struct spi_master *master;
|
||||
|
||||
size_t read_offset;
|
||||
};
|
||||
|
||||
static inline u32 bcm53xxspi_read(struct bcm53xxspi *b53spi, u16 offset)
|
||||
{
|
||||
return bcma_read32(b53spi->core, offset);
|
||||
}
|
||||
|
||||
static inline void bcm53xxspi_write(struct bcm53xxspi *b53spi, u16 offset,
|
||||
u32 value)
|
||||
{
|
||||
bcma_write32(b53spi->core, offset, value);
|
||||
}
|
||||
|
||||
static inline unsigned int bcm53xxspi_calc_timeout(size_t len)
|
||||
{
|
||||
/* Do some magic calculation based on length and buad. Add 10% and 1. */
|
||||
return (len * 9000 / BCM53XXSPI_MAX_SPI_BAUD * 110 / 100) + 1;
|
||||
}
|
||||
|
||||
static int bcm53xxspi_wait(struct bcm53xxspi *b53spi, unsigned int timeout_ms)
|
||||
{
|
||||
unsigned long deadline;
|
||||
u32 tmp;
|
||||
|
||||
/* SPE bit has to be 0 before we read MSPI STATUS */
|
||||
deadline = jiffies + BCM53XXSPI_SPE_TIMEOUT_MS * HZ / 1000;
|
||||
do {
|
||||
tmp = bcm53xxspi_read(b53spi, B53SPI_MSPI_SPCR2);
|
||||
if (!(tmp & B53SPI_MSPI_SPCR2_SPE))
|
||||
break;
|
||||
udelay(5);
|
||||
} while (!time_after_eq(jiffies, deadline));
|
||||
|
||||
if (tmp & B53SPI_MSPI_SPCR2_SPE)
|
||||
goto spi_timeout;
|
||||
|
||||
/* Check status */
|
||||
deadline = jiffies + timeout_ms * HZ / 1000;
|
||||
do {
|
||||
tmp = bcm53xxspi_read(b53spi, B53SPI_MSPI_MSPI_STATUS);
|
||||
if (tmp & B53SPI_MSPI_MSPI_STATUS_SPIF) {
|
||||
bcm53xxspi_write(b53spi, B53SPI_MSPI_MSPI_STATUS, 0);
|
||||
return 0;
|
||||
}
|
||||
|
||||
cpu_relax();
|
||||
udelay(100);
|
||||
} while (!time_after_eq(jiffies, deadline));
|
||||
|
||||
spi_timeout:
|
||||
bcm53xxspi_write(b53spi, B53SPI_MSPI_MSPI_STATUS, 0);
|
||||
|
||||
pr_err("Timeout waiting for SPI to be ready!\n");
|
||||
|
||||
return -EBUSY;
|
||||
}
|
||||
|
||||
static void bcm53xxspi_buf_write(struct bcm53xxspi *b53spi, u8 *w_buf,
|
||||
size_t len, bool cont)
|
||||
{
|
||||
u32 tmp;
|
||||
int i;
|
||||
|
||||
for (i = 0; i < len; i++) {
|
||||
/* Transmit Register File MSB */
|
||||
bcm53xxspi_write(b53spi, B53SPI_MSPI_TXRAM + 4 * (i * 2),
|
||||
(unsigned int)w_buf[i]);
|
||||
}
|
||||
|
||||
for (i = 0; i < len; i++) {
|
||||
tmp = B53SPI_CDRAM_CONT | B53SPI_CDRAM_PCS_DISABLE_ALL |
|
||||
B53SPI_CDRAM_PCS_DSCK;
|
||||
if (!cont && i == len - 1)
|
||||
tmp &= ~B53SPI_CDRAM_CONT;
|
||||
tmp &= ~0x1;
|
||||
/* Command Register File */
|
||||
bcm53xxspi_write(b53spi, B53SPI_MSPI_CDRAM + 4 * i, tmp);
|
||||
}
|
||||
|
||||
/* Set queue pointers */
|
||||
bcm53xxspi_write(b53spi, B53SPI_MSPI_NEWQP, 0);
|
||||
bcm53xxspi_write(b53spi, B53SPI_MSPI_ENDQP, len - 1);
|
||||
|
||||
if (cont)
|
||||
bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 1);
|
||||
|
||||
/* Start SPI transfer */
|
||||
tmp = bcm53xxspi_read(b53spi, B53SPI_MSPI_SPCR2);
|
||||
tmp |= B53SPI_MSPI_SPCR2_SPE;
|
||||
if (cont)
|
||||
tmp |= B53SPI_MSPI_SPCR2_CONT_AFTER_CMD;
|
||||
bcm53xxspi_write(b53spi, B53SPI_MSPI_SPCR2, tmp);
|
||||
|
||||
/* Wait for SPI to finish */
|
||||
bcm53xxspi_wait(b53spi, bcm53xxspi_calc_timeout(len));
|
||||
|
||||
if (!cont)
|
||||
bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 0);
|
||||
|
||||
b53spi->read_offset = len;
|
||||
}
|
||||
|
||||
static void bcm53xxspi_buf_read(struct bcm53xxspi *b53spi, u8 *r_buf,
|
||||
size_t len, bool cont)
|
||||
{
|
||||
u32 tmp;
|
||||
int i;
|
||||
|
||||
for (i = 0; i < b53spi->read_offset + len; i++) {
|
||||
tmp = B53SPI_CDRAM_CONT | B53SPI_CDRAM_PCS_DISABLE_ALL |
|
||||
B53SPI_CDRAM_PCS_DSCK;
|
||||
if (!cont && i == b53spi->read_offset + len - 1)
|
||||
tmp &= ~B53SPI_CDRAM_CONT;
|
||||
tmp &= ~0x1;
|
||||
/* Command Register File */
|
||||
bcm53xxspi_write(b53spi, B53SPI_MSPI_CDRAM + 4 * i, tmp);
|
||||
}
|
||||
|
||||
/* Set queue pointers */
|
||||
bcm53xxspi_write(b53spi, B53SPI_MSPI_NEWQP, 0);
|
||||
bcm53xxspi_write(b53spi, B53SPI_MSPI_ENDQP,
|
||||
b53spi->read_offset + len - 1);
|
||||
|
||||
if (cont)
|
||||
bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 1);
|
||||
|
||||
/* Start SPI transfer */
|
||||
tmp = bcm53xxspi_read(b53spi, B53SPI_MSPI_SPCR2);
|
||||
tmp |= B53SPI_MSPI_SPCR2_SPE;
|
||||
if (cont)
|
||||
tmp |= B53SPI_MSPI_SPCR2_CONT_AFTER_CMD;
|
||||
bcm53xxspi_write(b53spi, B53SPI_MSPI_SPCR2, tmp);
|
||||
|
||||
/* Wait for SPI to finish */
|
||||
bcm53xxspi_wait(b53spi, bcm53xxspi_calc_timeout(len));
|
||||
|
||||
if (!cont)
|
||||
bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 0);
|
||||
|
||||
for (i = 0; i < len; ++i) {
|
||||
int offset = b53spi->read_offset + i;
|
||||
|
||||
/* Data stored in the transmit register file LSB */
|
||||
r_buf[i] = (u8)bcm53xxspi_read(b53spi, B53SPI_MSPI_RXRAM + 4 * (1 + offset * 2));
|
||||
}
|
||||
|
||||
b53spi->read_offset = 0;
|
||||
}
|
||||
|
||||
static int bcm53xxspi_transfer_one(struct spi_master *master,
|
||||
struct spi_device *spi,
|
||||
struct spi_transfer *t)
|
||||
{
|
||||
struct bcm53xxspi *b53spi = spi_master_get_devdata(master);
|
||||
u8 *buf;
|
||||
size_t left;
|
||||
|
||||
if (t->tx_buf) {
|
||||
buf = (u8 *)t->tx_buf;
|
||||
left = t->len;
|
||||
while (left) {
|
||||
size_t to_write = min_t(size_t, 16, left);
|
||||
bool cont = left - to_write > 0;
|
||||
|
||||
bcm53xxspi_buf_write(b53spi, buf, to_write, cont);
|
||||
left -= to_write;
|
||||
buf += to_write;
|
||||
}
|
||||
}
|
||||
|
||||
if (t->rx_buf) {
|
||||
buf = (u8 *)t->rx_buf;
|
||||
left = t->len;
|
||||
while (left) {
|
||||
size_t to_read = min_t(size_t, 16 - b53spi->read_offset,
|
||||
left);
|
||||
bool cont = left - to_read > 0;
|
||||
|
||||
bcm53xxspi_buf_read(b53spi, buf, to_read, cont);
|
||||
left -= to_read;
|
||||
buf += to_read;
|
||||
}
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/**************************************************
|
||||
* BCMA
|
||||
**************************************************/
|
||||
|
||||
struct spi_board_info bcm53xx_info = {
|
||||
.modalias = "bcm53xxspiflash",
|
||||
};
|
||||
|
||||
static const struct bcma_device_id bcm53xxspi_bcma_tbl[] = {
|
||||
BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_NS_QSPI, BCMA_ANY_REV, BCMA_ANY_CLASS),
|
||||
BCMA_CORETABLE_END
|
||||
};
|
||||
MODULE_DEVICE_TABLE(bcma, bcm53xxspi_bcma_tbl);
|
||||
|
||||
static int bcm53xxspi_bcma_probe(struct bcma_device *core)
|
||||
{
|
||||
struct bcm53xxspi *b53spi;
|
||||
struct spi_master *master;
|
||||
int err;
|
||||
|
||||
if (core->bus->drv_cc.core->id.rev != 42) {
|
||||
pr_err("SPI on SoC with unsupported ChipCommon rev\n");
|
||||
return -ENOTSUPP;
|
||||
}
|
||||
|
||||
master = spi_alloc_master(&core->dev, sizeof(*b53spi));
|
||||
if (!master)
|
||||
return -ENOMEM;
|
||||
|
||||
b53spi = spi_master_get_devdata(master);
|
||||
b53spi->master = master;
|
||||
b53spi->core = core;
|
||||
|
||||
master->transfer_one = bcm53xxspi_transfer_one;
|
||||
|
||||
bcma_set_drvdata(core, b53spi);
|
||||
|
||||
err = devm_spi_register_master(&core->dev, master);
|
||||
if (err) {
|
||||
spi_master_put(master);
|
||||
bcma_set_drvdata(core, NULL);
|
||||
goto out;
|
||||
}
|
||||
|
||||
/* Broadcom SoCs (at least with the CC rev 42) use SPI for flash only */
|
||||
spi_new_device(master, &bcm53xx_info);
|
||||
|
||||
out:
|
||||
return err;
|
||||
}
|
||||
|
||||
static void bcm53xxspi_bcma_remove(struct bcma_device *core)
|
||||
{
|
||||
struct bcm53xxspi *b53spi = bcma_get_drvdata(core);
|
||||
|
||||
spi_unregister_master(b53spi->master);
|
||||
}
|
||||
|
||||
static struct bcma_driver bcm53xxspi_bcma_driver = {
|
||||
.name = KBUILD_MODNAME,
|
||||
.id_table = bcm53xxspi_bcma_tbl,
|
||||
.probe = bcm53xxspi_bcma_probe,
|
||||
.remove = bcm53xxspi_bcma_remove,
|
||||
};
|
||||
|
||||
/**************************************************
|
||||
* Init & exit
|
||||
**************************************************/
|
||||
|
||||
static int __init bcm53xxspi_module_init(void)
|
||||
{
|
||||
int err = 0;
|
||||
|
||||
err = bcma_driver_register(&bcm53xxspi_bcma_driver);
|
||||
if (err)
|
||||
pr_err("Failed to register bcma driver: %d\n", err);
|
||||
|
||||
return err;
|
||||
}
|
||||
|
||||
static void __exit bcm53xxspi_module_exit(void)
|
||||
{
|
||||
bcma_driver_unregister(&bcm53xxspi_bcma_driver);
|
||||
}
|
||||
|
||||
module_init(bcm53xxspi_module_init);
|
||||
module_exit(bcm53xxspi_module_exit);
|
||||
72
drivers/spi/spi-bcm53xx.h
Normal file
72
drivers/spi/spi-bcm53xx.h
Normal file
@ -0,0 +1,72 @@
|
||||
#ifndef SPI_BCM53XX_H
|
||||
#define SPI_BCM53XX_H
|
||||
|
||||
#define B53SPI_BSPI_REVISION_ID 0x000
|
||||
#define B53SPI_BSPI_SCRATCH 0x004
|
||||
#define B53SPI_BSPI_MAST_N_BOOT_CTRL 0x008
|
||||
#define B53SPI_BSPI_BUSY_STATUS 0x00c
|
||||
#define B53SPI_BSPI_INTR_STATUS 0x010
|
||||
#define B53SPI_BSPI_B0_STATUS 0x014
|
||||
#define B53SPI_BSPI_B0_CTRL 0x018
|
||||
#define B53SPI_BSPI_B1_STATUS 0x01c
|
||||
#define B53SPI_BSPI_B1_CTRL 0x020
|
||||
#define B53SPI_BSPI_STRAP_OVERRIDE_CTRL 0x024
|
||||
#define B53SPI_BSPI_FLEX_MODE_ENABLE 0x028
|
||||
#define B53SPI_BSPI_BITS_PER_CYCLE 0x02c
|
||||
#define B53SPI_BSPI_BITS_PER_PHASE 0x030
|
||||
#define B53SPI_BSPI_CMD_AND_MODE_BYTE 0x034
|
||||
#define B53SPI_BSPI_BSPI_FLASH_UPPER_ADDR_BYTE 0x038
|
||||
#define B53SPI_BSPI_BSPI_XOR_VALUE 0x03c
|
||||
#define B53SPI_BSPI_BSPI_XOR_ENABLE 0x040
|
||||
#define B53SPI_BSPI_BSPI_PIO_MODE_ENABLE 0x044
|
||||
#define B53SPI_BSPI_BSPI_PIO_IODIR 0x048
|
||||
#define B53SPI_BSPI_BSPI_PIO_DATA 0x04c
|
||||
|
||||
/* RAF */
|
||||
#define B53SPI_RAF_START_ADDR 0x100
|
||||
#define B53SPI_RAF_NUM_WORDS 0x104
|
||||
#define B53SPI_RAF_CTRL 0x108
|
||||
#define B53SPI_RAF_FULLNESS 0x10c
|
||||
#define B53SPI_RAF_WATERMARK 0x110
|
||||
#define B53SPI_RAF_STATUS 0x114
|
||||
#define B53SPI_RAF_READ_DATA 0x118
|
||||
#define B53SPI_RAF_WORD_CNT 0x11c
|
||||
#define B53SPI_RAF_CURR_ADDR 0x120
|
||||
|
||||
/* MSPI */
|
||||
#define B53SPI_MSPI_SPCR0_LSB 0x200
|
||||
#define B53SPI_MSPI_SPCR0_MSB 0x204
|
||||
#define B53SPI_MSPI_SPCR1_LSB 0x208
|
||||
#define B53SPI_MSPI_SPCR1_MSB 0x20c
|
||||
#define B53SPI_MSPI_NEWQP 0x210
|
||||
#define B53SPI_MSPI_ENDQP 0x214
|
||||
#define B53SPI_MSPI_SPCR2 0x218
|
||||
#define B53SPI_MSPI_SPCR2_SPE 0x00000040
|
||||
#define B53SPI_MSPI_SPCR2_CONT_AFTER_CMD 0x00000080
|
||||
#define B53SPI_MSPI_MSPI_STATUS 0x220
|
||||
#define B53SPI_MSPI_MSPI_STATUS_SPIF 0x00000001
|
||||
#define B53SPI_MSPI_CPTQP 0x224
|
||||
#define B53SPI_MSPI_TXRAM 0x240 /* 32 registers, up to 0x2b8 */
|
||||
#define B53SPI_MSPI_RXRAM 0x2c0 /* 32 registers, up to 0x33c */
|
||||
#define B53SPI_MSPI_CDRAM 0x340 /* 16 registers, up to 0x37c */
|
||||
#define B53SPI_CDRAM_PCS_PCS0 0x00000001
|
||||
#define B53SPI_CDRAM_PCS_PCS1 0x00000002
|
||||
#define B53SPI_CDRAM_PCS_PCS2 0x00000004
|
||||
#define B53SPI_CDRAM_PCS_PCS3 0x00000008
|
||||
#define B53SPI_CDRAM_PCS_DISABLE_ALL 0x0000000f
|
||||
#define B53SPI_CDRAM_PCS_DSCK 0x00000010
|
||||
#define B53SPI_CDRAM_BITSE 0x00000040
|
||||
#define B53SPI_CDRAM_CONT 0x00000080
|
||||
#define B53SPI_MSPI_WRITE_LOCK 0x380
|
||||
#define B53SPI_MSPI_DISABLE_FLUSH_GEN 0x384
|
||||
|
||||
/* Interrupt */
|
||||
#define B53SPI_INTR_RAF_LR_FULLNESS_REACHED 0x3a0
|
||||
#define B53SPI_INTR_RAF_LR_TRUNCATED 0x3a4
|
||||
#define B53SPI_INTR_RAF_LR_IMPATIENT 0x3a8
|
||||
#define B53SPI_INTR_RAF_LR_SESSION_DONE 0x3ac
|
||||
#define B53SPI_INTR_RAF_LR_OVERREAD 0x3b0
|
||||
#define B53SPI_INTR_MSPI_DONE 0x3b4
|
||||
#define B53SPI_INTR_MSPI_HALT_SET_TRANSACTION_DONE 0x3b8
|
||||
|
||||
#endif /* SPI_BCM53XX_H */
|
||||
Loading…
Reference in New Issue
Block a user