iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

arm64: dts: qcom: Add support for MSM8998 F(x)tec Pro1 QX1000

Browse Source 
Add device tree support for the F(x)tec Pro 1 (QX1000) smartphone;
this is a minimal configuration to boot to serial console.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210909123823.368199-1-angelogioacchino.delregno@somainline.org
This commit is contained in:
AngeloGioacchino Del Regno 2021-09-09 14:38:20 +02:00 committed by Bjorn Andersson
parent 8199a0b31e
commit 122d2c5f31
2 changed files with 186 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
arch/arm64/boot/dts/qcom/Makefile
View File

@ -36,6 +36,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8996-sony-xperia-tone-keyaki.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8996-xiaomi-gemini.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8996-xiaomi-scorpio.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8998-asus-novago-tp370ql.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8998-fxtec-pro1.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8998-hp-envy-x2.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8998-lenovo-miix-630.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8998-mtp.dtb

185
arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts Normal file
View File

@ -0,0 +1,185 @@
// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2021, AngeloGioacchino Del Regno
* <angelogioacchino.delregno@somainline.org>
*/
/dts-v1/;
#include "msm8998-mtp.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
/ {
model = "F(x)tec Pro1 (QX1000)";
compatible = "fxtec,pro1", "qcom,msm8998";
qcom,board-id = <0x02000b 0x10>;
/*
* Until we hook up type-c detection, we
* have to stick with this. But it works.
*/
extcon_usb: extcon-usb {
compatible = "linux,extcon-usb-gpio";
id-gpio = <&tlmm 38 GPIO_ACTIVE_HIGH>;
};
gpio-hall-sensors {
compatible = "gpio-keys";
input-name = "hall-sensors";
label = "Hall sensors";
pinctrl-names = "default";
pinctrl-0 = <&hall_sensor1_default>;
hall-sensor1 {
label = "Keyboard Hall Sensor";
gpios = <&tlmm 124 GPIO_ACTIVE_HIGH>;
debounce-interval = <15>;
gpio-key,wakeup;
linux,input-type = <EV_SW>;
linux,code = <SW_KEYPAD_SLIDE>;
};
};
gpio-keys {
compatible = "gpio-keys";
input-name = "side-buttons";
label = "Side buttons";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&vol_up_pin_a>, <&cam_focus_pin_a>,
<&cam_snapshot_pin_a>;
vol-up {
label = "Volume Up";
gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
linux,input-type = <EV_KEY>;
linux,code = <KEY_VOLUMEUP>;
gpio-key,wakeup;
debounce-interval = <15>;
};
camera-snapshot {
label = "Camera Snapshot";
gpios = <&pm8998_gpio 7 GPIO_ACTIVE_LOW>;
linux,input-type = <EV_KEY>;
linux,code = <KEY_CAMERA>;
debounce-interval = <15>;
};
camera-focus {
label = "Camera Focus";
gpios = <&pm8998_gpio 8 GPIO_ACTIVE_LOW>;
linux,input-type = <EV_KEY>;
linux,code = <KEY_CAMERA_FOCUS>;
debounce-interval = <15>;
};
};
reserved-memory {
cont_splash_mem: memory@9d400000 {
reg = <0x0 0x9d400000 0x0 0x2000000>;
no-map;
};
zap_shader_region: memory@f6400000 {
compatible = "shared-dma-pool";
reg = <0x0 0xf6400000 0x0 0x2000>;
no-map;
};
ramoops@ffc00000 {
compatible = "ramoops";
reg = <0x0 0xffc00000 0x0 0x100000>;
console-size = <0x60000>;
ecc-size = <16>;
ftrace-size = <0x10000>;
pmsg-size = <0x20000>;
record-size = <0x10000>;
};
};
};
&mmcc {
status = "ok";
};
&mmss_smmu {
status = "ok";
};
&pm8998_gpio {
vol_up_pin_a: vol-up-active {
pins = "gpio6";
function = "normal";
bias-pull-up;
input-enable;
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
};
cam_focus_pin_a: cam-focus-btn-active {
pins = "gpio7";
function = "normal";
bias-pull-up;
input-enable;
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
};
cam_snapshot_pin_a: cam-snapshot-btn-active {
pins = "gpio8";
function = "normal";
bias-pull-up;
input-enable;
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
};
};
&pm8998_pon {
resin {
compatible = "qcom,pm8941-resin";
interrupts = <GIC_SPI 0x8 1 IRQ_TYPE_EDGE_BOTH>;
bias-pull-up;
debounce = <15625>;
linux,code = <KEY_VOLUMEDOWN>;
};
};
&tlmm {
gpio-reserved-ranges = <0 4>;
mdp_vsync_n: mdp-vsync-n {
pins = "gpio10";
function = "mdp_vsync_a";
bias-pull-down;
drive-strength = <2>;
};
hall_sensor1_default: hall-sensor1-def {
pins = "gpio124";
function = "gpio";
bias-disable;
drive-strength = <2>;
input-enable;
};
};
&ufshc {
status = "ok";
};
&ufsphy {
status = "ok";
};
&usb3_dwc3 {
dr_mode = "peripheral";
extcon = <&extcon_usb>;
};
/* GT9286 analog supply */
&vreg_l28_3p0 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};