staging:rtl8192u: Remove unused definitions - Style
Remove unused definitions from the r8192U_hw.h header file. These are coding style changes which should not impact on runtime code execution. Signed-off-by: John Whitmore <johnfwhitmore@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
John Whitmore
Greg Kroah-Hartman
parent
111118af91
commit
12a2b6f6ea
@ -29,24 +29,9 @@
|
||||
#define MAX_RX_URB 16
|
||||
|
||||
#define R8180_MAX_RETRY 255
|
||||
//#define MAX_RX_NORMAL_URB 3
|
||||
//#define MAX_RX_COMMAND_URB 2
|
||||
|
||||
#define RX_URB_SIZE 9100
|
||||
|
||||
#define BB_ANTATTEN_CHAN14 0x0c
|
||||
#define BB_ANTENNA_B 0x40
|
||||
|
||||
#define BB_HOST_BANG BIT(30)
|
||||
#define BB_HOST_BANG_EN BIT(2)
|
||||
#define BB_HOST_BANG_CLK BIT(1)
|
||||
#define BB_HOST_BANG_RW BIT(3)
|
||||
#define BB_HOST_BANG_DATA 1
|
||||
|
||||
//#if (RTL819X_FPGA_VER & RTL819X_FPGA_VIVI_070920)
|
||||
#define AFR 0x010
|
||||
#define AFR_CardBEn BIT(0)
|
||||
#define AFR_CLKRUN_SEL BIT(1)
|
||||
#define AFR_FuncRegEn BIT(2)
|
||||
#define RTL8190_EEPROM_ID 0x8129
|
||||
#define EEPROM_VID 0x02
|
||||
#define EEPROM_PID 0x04
|
||||
@ -63,24 +48,14 @@
|
||||
#define EEPROM_TxPwIndex_OFDM_24G_V1 0x2C //0x2C~0x2E
|
||||
#define EEPROM_TxPwIndex_Ver 0x27 //0x27
|
||||
|
||||
#define EEPROM_Default_TxPowerDiff 0x0
|
||||
#define EEPROM_Default_ThermalMeter 0x7
|
||||
#define EEPROM_Default_PwDiff 0x4
|
||||
#define EEPROM_Default_CrystalCap 0x5
|
||||
#define EEPROM_Default_TxPower 0x1010
|
||||
#define EEPROM_Customer_ID 0x7B //0x7B:CustomerID
|
||||
#define EEPROM_ChannelPlan 0x16 //0x7C
|
||||
#define EEPROM_IC_VER 0x7d //0x7D
|
||||
#define EEPROM_CRC 0x7e //0x7E~0x7F
|
||||
|
||||
#define EEPROM_CID_DEFAULT 0x0
|
||||
#define EEPROM_CID_CAMEO 0x1
|
||||
#define EEPROM_CID_RUNTOP 0x2
|
||||
#define EEPROM_CID_Senao 0x3
|
||||
#define EEPROM_CID_TOSHIBA 0x4 // Toshiba setting, Merge by Jacken, 2008/01/31
|
||||
#define EEPROM_CID_NetCore 0x5
|
||||
#define EEPROM_CID_Nettronix 0x6
|
||||
#define EEPROM_CID_Pronet 0x7
|
||||
#define EEPROM_CID_DLINK 0x8
|
||||
|
||||
#define AC_PARAM_TXOP_LIMIT_OFFSET 16
|
||||
@ -91,17 +66,13 @@
|
||||
//#endif
|
||||
enum _RTL8192Usb_HW {
|
||||
|
||||
PCIF = 0x009, // PCI Function Register 0x0009h~0x000bh
|
||||
#define BB_GLOBAL_RESET_BIT 0x1
|
||||
BB_GLOBAL_RESET = 0x020, // BasebandGlobal Reset Register
|
||||
BSSIDR = 0x02E, // BSSID Register
|
||||
CMDR = 0x037, // Command register
|
||||
#define CR_RST 0x10
|
||||
#define CR_RE 0x08
|
||||
#define CR_TE 0x04
|
||||
#define CR_MulRW 0x01
|
||||
SIFS = 0x03E, // SIFS register
|
||||
TCR = 0x040, // Transmit Configuration Register
|
||||
|
||||
#define TCR_MXDMA_2048 7
|
||||
#define TCR_LRL_OFFSET 0
|
||||
@ -114,26 +85,16 @@ enum _RTL8192Usb_HW {
|
||||
BIT(22) | BIT(23))
|
||||
#define RX_FIFO_THRESHOLD_MASK (BIT(13) | BIT(14) | BIT(15))
|
||||
#define RX_FIFO_THRESHOLD_SHIFT 13
|
||||
#define RX_FIFO_THRESHOLD_128 3
|
||||
#define RX_FIFO_THRESHOLD_256 4
|
||||
#define RX_FIFO_THRESHOLD_512 5
|
||||
#define RX_FIFO_THRESHOLD_1024 6
|
||||
#define RX_FIFO_THRESHOLD_NONE 7
|
||||
#define MAX_RX_DMA_MASK (BIT(8) | BIT(9) | BIT(10))
|
||||
#define RCR_MXDMA_OFFSET 8
|
||||
#define RCR_FIFO_OFFSET 13
|
||||
#define RCR_ONLYERLPKT BIT(31) // Early Receiving based on Packet Size.
|
||||
#define RCR_ENCS2 BIT(30) // Enable Carrier Sense Detection Method 2
|
||||
#define RCR_ENCS1 BIT(29) // Enable Carrier Sense Detection Method 1
|
||||
#define RCR_ENMBID BIT(27) // Enable Multiple BssId.
|
||||
#define RCR_ACKTXBW (BIT(24) | BIT(25)) // TXBW Setting of ACK frames
|
||||
#define RCR_CBSSID BIT(23) // Accept BSSID match packet
|
||||
#define RCR_APWRMGT BIT(22) // Accept power management packet
|
||||
#define RCR_ADD3 BIT(21) // Accept address 3 match packet
|
||||
#define RCR_AMF BIT(20) // Accept management type frame
|
||||
#define RCR_ACF BIT(19) // Accept control type frame
|
||||
#define RCR_ADF BIT(18) // Accept data type frame
|
||||
#define RCR_RXFTH BIT(13) // Rx FIFO Threshold
|
||||
#define RCR_AICV BIT(12) // Accept ICV error packet
|
||||
#define RCR_ACRC32 BIT(5) // Accept CRC32 error packet
|
||||
#define RCR_AB BIT(3) // Accept broadcast packet
|
||||
@ -142,14 +103,10 @@ enum _RTL8192Usb_HW {
|
||||
#define RCR_AAP BIT(0) // Accept all unicast packet
|
||||
SLOT_TIME = 0x049, // Slot Time Register
|
||||
ACK_TIMEOUT = 0x04c, // Ack Timeout Register
|
||||
PIFS_TIME = 0x04d, // PIFS time
|
||||
USTIME = 0x04e, // Microsecond Tuning Register, Sets the microsecond time unit used by MAC clock.
|
||||
EDCAPARA_BE = 0x050, // EDCA Parameter of AC BE
|
||||
EDCAPARA_BK = 0x054, // EDCA Parameter of AC BK
|
||||
EDCAPARA_VO = 0x058, // EDCA Parameter of AC VO
|
||||
EDCAPARA_VI = 0x05C, // EDCA Parameter of AC VI
|
||||
RFPC = 0x05F, // Rx FIFO Packet Count
|
||||
CWRR = 0x060, // Contention Window Report Register
|
||||
BCN_TCFG = 0x062, // Beacon Time Configuration
|
||||
#define BCN_TCFG_CW_SHIFT 8
|
||||
#define BCN_TCFG_IFS 0
|
||||
@ -160,7 +117,6 @@ enum _RTL8192Usb_HW {
|
||||
BCN_ERR_THRESH = 0x078, // Beacon Error Threshold
|
||||
RWCAM = 0x0A0, //IN 8190 Data Sheet is called CAMcmd
|
||||
WCAMI = 0x0A4, // Software write CAM input content
|
||||
RCAMO = 0x0A8, // Software read/write CAM config
|
||||
SECR = 0x0B0, //Security Configuration Register
|
||||
#define SCR_TxUseDK BIT(0) //Force Tx Use Default Key
|
||||
#define SCR_RxUseDK BIT(1) //Force Rx Use Default Key
|
||||
@ -168,21 +124,6 @@ enum _RTL8192Usb_HW {
|
||||
#define SCR_RxDecEnable BIT(3) //Enable Rx Decryption
|
||||
#define SCR_SKByA2 BIT(4) //Search kEY BY A2
|
||||
#define SCR_NoSKMC BIT(5) //No Key Search for Multicast
|
||||
#define SCR_UseDK 0x01
|
||||
#define SCR_TxSecEnable 0x02
|
||||
#define SCR_RxSecEnable 0x04
|
||||
TPPoll = 0x0fd, // Transmit priority polling register
|
||||
PSR = 0x0ff, // Page Select Register
|
||||
#define CPU_CCK_LOOPBACK 0x00030000
|
||||
#define CPU_GEN_SYSTEM_RESET 0x00000001
|
||||
#define CPU_GEN_FIRMWARE_RESET 0x00000008
|
||||
#define CPU_GEN_BOOT_RDY 0x00000010
|
||||
#define CPU_GEN_FIRM_RDY 0x00000020
|
||||
#define CPU_GEN_PUT_CODE_OK 0x00000080
|
||||
#define CPU_GEN_BB_RST 0x00000100
|
||||
#define CPU_GEN_PWR_STB_CPU 0x00000004
|
||||
#define CPU_GEN_NO_LOOPBACK_MSK 0xFFF8FFFF // Set bit18,17,16 to 0. Set bit19
|
||||
#define CPU_GEN_NO_LOOPBACK_SET 0x00080000 // Set BIT19 to 1
|
||||
|
||||
//----------------------------------------------------------------------------
|
||||
// 8190 CPU General Register (offset 0x100, 4 byte)
|
||||
@ -198,72 +139,20 @@ enum _RTL8192Usb_HW {
|
||||
#define CPU_GEN_NO_LOOPBACK_MSK 0xFFF8FFFF // Set bit18,17,16 to 0. Set bit19
|
||||
#define CPU_GEN_NO_LOOPBACK_SET 0x00080000 // Set BIT19 to 1
|
||||
CPU_GEN = 0x100, // CPU Reset Register
|
||||
LED1Cfg = 0x154,// LED1 Configuration Register
|
||||
LED0Cfg = 0x155,// LED0 Configuration Register
|
||||
|
||||
AcmAvg = 0x170, // ACM Average Period Register
|
||||
AcmHwCtrl = 0x171, // ACM Hardware Control Register
|
||||
//----------------------------------------------------------------------------
|
||||
////
|
||||
//// 8190 AcmHwCtrl bits (offset 0x171, 1 byte)
|
||||
////----------------------------------------------------------------------------
|
||||
//
|
||||
#define AcmHw_HwEn BIT(0)
|
||||
#define AcmHw_BeqEn BIT(1)
|
||||
#define AcmHw_ViqEn BIT(2)
|
||||
#define AcmHw_VoqEn BIT(3)
|
||||
#define AcmHw_BeqStatus BIT(4)
|
||||
#define AcmHw_ViqStatus BIT(5)
|
||||
#define AcmHw_VoqStatus BIT(6)
|
||||
|
||||
AcmFwCtrl = 0x172, // ACM Firmware Control Register
|
||||
AES_11N_FIX = 0x173,
|
||||
VOAdmTime = 0x174, // VO Queue Admitted Time Register
|
||||
VIAdmTime = 0x178, // VI Queue Admitted Time Register
|
||||
BEAdmTime = 0x17C, // BE Queue Admitted Time Register
|
||||
RQPN1 = 0x180, // Reserved Queue Page Number , Vo Vi, Be, Bk
|
||||
RQPN2 = 0x184, // Reserved Queue Page Number, HCCA, Cmd, Mgnt, High
|
||||
RQPN3 = 0x188, // Reserved Queue Page Number, Bcn, Public,
|
||||
// QPRR = 0x1E0, // Queue Page Report per TID
|
||||
QPNR = 0x1D0, //0x1F0, // Queue Packet Number report per TID
|
||||
BQDA = 0x200, // Beacon Queue Descriptor Address
|
||||
HQDA = 0x204, // High Priority Queue Descriptor Address
|
||||
CQDA = 0x208, // Command Queue Descriptor Address
|
||||
MQDA = 0x20C, // Management Queue Descriptor Address
|
||||
HCCAQDA = 0x210, // HCCA Queue Descriptor Address
|
||||
VOQDA = 0x214, // VO Queue Descriptor Address
|
||||
VIQDA = 0x218, // VI Queue Descriptor Address
|
||||
BEQDA = 0x21C, // BE Queue Descriptor Address
|
||||
BKQDA = 0x220, // BK Queue Descriptor Address
|
||||
RCQDA = 0x224, // Receive command Queue Descriptor Address
|
||||
RDQDA = 0x228, // Receive Queue Descriptor Start Address
|
||||
|
||||
MAR0 = 0x240, // Multicast filter.
|
||||
MAR4 = 0x244,
|
||||
|
||||
CCX_PERIOD = 0x250, // CCX Measurement Period Register, in unit of TU.
|
||||
CLM_RESULT = 0x251, // CCA Busy fraction register.
|
||||
NHM_PERIOD = 0x252, // NHM Measurement Period register, in unit of TU.
|
||||
|
||||
NHM_THRESHOLD0 = 0x253, // Noise Histogram Meashorement0.
|
||||
NHM_THRESHOLD1 = 0x254, // Noise Histogram Meashorement1.
|
||||
NHM_THRESHOLD2 = 0x255, // Noise Histogram Meashorement2.
|
||||
NHM_THRESHOLD3 = 0x256, // Noise Histogram Meashorement3.
|
||||
NHM_THRESHOLD4 = 0x257, // Noise Histogram Meashorement4.
|
||||
NHM_THRESHOLD5 = 0x258, // Noise Histogram Meashorement5.
|
||||
NHM_THRESHOLD6 = 0x259, // Noise Histogram Meashorement6
|
||||
|
||||
MCTRL = 0x25A, // Measurement Control
|
||||
|
||||
NHM_RPI_COUNTER0 = 0x264, // Noise Histogram RPI counter0, the fraction of signal strength < NHM_THRESHOLD0.
|
||||
NHM_RPI_COUNTER1 = 0x265, // Noise Histogram RPI counter1, the fraction of signal strength in (NHM_THRESHOLD0, NHM_THRESHOLD1].
|
||||
NHM_RPI_COUNTER2 = 0x266, // Noise Histogram RPI counter2, the fraction of signal strength in (NHM_THRESHOLD1, NHM_THRESHOLD2].
|
||||
NHM_RPI_COUNTER3 = 0x267, // Noise Histogram RPI counter3, the fraction of signal strength in (NHM_THRESHOLD2, NHM_THRESHOLD3].
|
||||
NHM_RPI_COUNTER4 = 0x268, // Noise Histogram RPI counter4, the fraction of signal strength in (NHM_THRESHOLD3, NHM_THRESHOLD4].
|
||||
NHM_RPI_COUNTER5 = 0x269, // Noise Histogram RPI counter5, the fraction of signal strength in (NHM_THRESHOLD4, NHM_THRESHOLD5].
|
||||
NHM_RPI_COUNTER6 = 0x26A, // Noise Histogram RPI counter6, the fraction of signal strength in (NHM_THRESHOLD5, NHM_THRESHOLD6].
|
||||
NHM_RPI_COUNTER7 = 0x26B, // Noise Histogram RPI counter7, the fraction of signal strength in (NHM_THRESHOLD6, NHM_THRESHOLD7].
|
||||
#define BW_OPMODE_11J BIT(0)
|
||||
#define BW_OPMODE_5G BIT(1)
|
||||
#define BW_OPMODE_20MHZ BIT(2)
|
||||
BW_OPMODE = 0x300, // Bandwidth operation mode
|
||||
@ -274,18 +163,10 @@ enum _RTL8192Usb_HW {
|
||||
#define MSR_LINK_SHIFT 0
|
||||
#define MSR_LINK_ADHOC 1
|
||||
#define MSR_LINK_MASTER 3
|
||||
#define MSR_LINK_ENEDCA BIT(4)
|
||||
RETRY_LIMIT = 0x304, // Retry Limit [15:8]-short, [7:0]-long
|
||||
#define RETRY_LIMIT_SHORT_SHIFT 8
|
||||
#define RETRY_LIMIT_LONG_SHIFT 0
|
||||
TSFR = 0x308,
|
||||
RRSR = 0x310, // Response Rate Set
|
||||
#define RRSR_RSC_OFFSET 21
|
||||
#define RRSR_SHORT_OFFSET 23
|
||||
#define RRSR_RSC_DUPLICATE 0x600000
|
||||
#define RRSR_RSC_LOWSUBCHNL 0x400000
|
||||
#define RRSR_RSC_UPSUBCHANL 0x200000
|
||||
#define RRSR_SHORT 0x800000
|
||||
#define RRSR_1M BIT(0)
|
||||
#define RRSR_2M BIT(1)
|
||||
#define RRSR_5_5M BIT(2)
|
||||
@ -298,14 +179,6 @@ enum _RTL8192Usb_HW {
|
||||
#define RRSR_36M BIT(9)
|
||||
#define RRSR_48M BIT(10)
|
||||
#define RRSR_54M BIT(11)
|
||||
#define RRSR_MCS0 BIT(12)
|
||||
#define RRSR_MCS1 BIT(13)
|
||||
#define RRSR_MCS2 BIT(14)
|
||||
#define RRSR_MCS3 BIT(15)
|
||||
#define RRSR_MCS4 BIT(16)
|
||||
#define RRSR_MCS5 BIT(17)
|
||||
#define RRSR_MCS6 BIT(18)
|
||||
#define RRSR_MCS7 BIT(19)
|
||||
#define BRSR_AckShortPmb BIT(23) // CCK ACK: use Short Preamble or not.
|
||||
RATR0 = 0x320, // Rate Adaptive Table register1
|
||||
UFWP = 0x318,
|
||||
@ -354,21 +227,10 @@ enum _RTL8192Usb_HW {
|
||||
#define RATE_ALL_OFDM_2SS RATR_MCS8|RATR_MCS9 |RATR_MCS10|RATR_MCS11| \
|
||||
RATR_MCS12|RATR_MCS13|RATR_MCS14|RATR_MCS15
|
||||
|
||||
MCS_TXAGC = 0x340, // MCS AGC
|
||||
CCK_TXAGC = 0x348, // CCK AGC
|
||||
// ISR = 0x350, // Interrupt Status Register
|
||||
// IMR = 0x354, // Interrupt Mask Register
|
||||
// IMR_POLL = 0x360,
|
||||
MacBlkCtrl = 0x403, // Mac block on/off control register
|
||||
|
||||
EPROM_CMD = 0xfe58,
|
||||
#define Cmd9346CR_9356SEL BIT(4)
|
||||
#define EPROM_CMD_RESERVED_MASK BIT(5)
|
||||
#define EPROM_CMD_OPERATING_MODE_SHIFT 6
|
||||
#define EPROM_CMD_OPERATING_MODE_MASK (BIT(7) | BIT(6))
|
||||
#define EPROM_CMD_CONFIG 0x3
|
||||
#define EPROM_CMD_NORMAL 0
|
||||
#define EPROM_CMD_LOAD 1
|
||||
#define EPROM_CMD_PROGRAM 2
|
||||
#define EPROM_CS_BIT BIT(3)
|
||||
#define EPROM_CK_BIT BIT(2)
|
||||
@ -376,19 +238,10 @@ enum _RTL8192Usb_HW {
|
||||
#define EPROM_R_BIT BIT(0)
|
||||
|
||||
MAC0 = 0x000,
|
||||
MAC1 = 0x001,
|
||||
MAC2 = 0x002,
|
||||
MAC3 = 0x003,
|
||||
MAC4 = 0x004,
|
||||
MAC5 = 0x005,
|
||||
|
||||
};
|
||||
//----------------------------------------------------------------------------
|
||||
// 818xB AnaParm & AnaParm2 Register
|
||||
//----------------------------------------------------------------------------
|
||||
//#define ANAPARM_ASIC_ON 0x45090658
|
||||
//#define ANAPARM2_ASIC_ON 0x727f3f52
|
||||
#define GPI 0x108
|
||||
#define GPO 0x109
|
||||
#define GPE 0x10a
|
||||
#endif
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user