xhci: use pm_ptr() instead of #ifdef for CONFIG_PM conditionals

A recent patch caused an unused-function warning in builds with
CONFIG_PM disabled, after the function became marked 'static':

drivers/usb/host/xhci-pci.c:91:13: error: 'xhci_msix_sync_irqs' defined but not used [-Werror=unused-function]
   91 | static void xhci_msix_sync_irqs(struct xhci_hcd *xhci)
      |             ^~~~~~~~~~~~~~~~~~~

This could be solved by adding another #ifdef, but as there is
a trend towards removing CONFIG_PM checks in favor of helper
macros, do the same conversion here and use pm_ptr() to get
either a function pointer or NULL but avoid the warning.

As the hidden functions reference some other symbols, make
sure those are visible at compile time, at the minimal cost of
a few extra bytes for 'struct usb_device'.

Fixes: 9abe15d55dcc ("xhci: Move xhci MSI sync function to to xhci-pci")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230328131114.1296430-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Arnd Bergmann 2023-03-28 15:10:43 +02:00 committed by Greg Kroah-Hartman
parent f54134b3fc
commit 130eac4170
3 changed files with 6 additions and 15 deletions

View File

@ -728,7 +728,6 @@ static void xhci_pci_remove(struct pci_dev *dev)
usb_hcd_pci_remove(dev);
}
#ifdef CONFIG_PM
/*
* In some Intel xHCI controllers, in order to get D3 working,
* through a vendor specific SSIC CONFIG register at offset 0x883c,
@ -927,7 +926,6 @@ static void xhci_pci_shutdown(struct usb_hcd *hcd)
if (xhci->quirks & XHCI_SPURIOUS_WAKEUP)
pci_set_power_state(pdev, PCI_D3hot);
}
#endif /* CONFIG_PM */
/*-------------------------------------------------------------------------*/
@ -970,9 +968,7 @@ static struct pci_driver xhci_pci_driver = {
.shutdown = usb_hcd_pci_shutdown,
.driver = {
#ifdef CONFIG_PM
.pm = &usb_hcd_pci_pm_ops,
#endif
.pm = pm_ptr(&usb_hcd_pci_pm_ops),
.probe_type = PROBE_PREFER_ASYNCHRONOUS,
},
};
@ -980,12 +976,10 @@ static struct pci_driver xhci_pci_driver = {
static int __init xhci_pci_init(void)
{
xhci_init_driver(&xhci_pci_hc_driver, &xhci_pci_overrides);
#ifdef CONFIG_PM
xhci_pci_hc_driver.pci_suspend = xhci_pci_suspend;
xhci_pci_hc_driver.pci_resume = xhci_pci_resume;
xhci_pci_hc_driver.pci_poweroff_late = xhci_pci_poweroff_late;
xhci_pci_hc_driver.shutdown = xhci_pci_shutdown;
#endif
xhci_pci_hc_driver.pci_suspend = pm_ptr(xhci_pci_suspend);
xhci_pci_hc_driver.pci_resume = pm_ptr(xhci_pci_resume);
xhci_pci_hc_driver.pci_poweroff_late = pm_ptr(xhci_pci_poweroff_late);
xhci_pci_hc_driver.shutdown = pm_ptr(xhci_pci_shutdown);
xhci_pci_hc_driver.stop = xhci_pci_stop;
return pci_register_driver(&xhci_pci_driver);
}

View File

@ -704,13 +704,12 @@ struct usb_device {
unsigned long active_duration;
#ifdef CONFIG_PM
unsigned long connect_time;
unsigned do_remote_wakeup:1;
unsigned reset_resume:1;
unsigned port_is_suspended:1;
#endif
struct wusb_dev *wusb_dev;
int slot_id;
struct usb2_lpm_parameters l1_params;

View File

@ -488,9 +488,7 @@ extern void usb_hcd_pci_shutdown(struct pci_dev *dev);
extern int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *dev);
#ifdef CONFIG_PM
extern const struct dev_pm_ops usb_hcd_pci_pm_ops;
#endif
#endif /* CONFIG_USB_PCI */
/* pci-ish (pdev null is ok) buffer alloc/mapping support */