spi: rspi: Add support for GPIO chip selects
Add support for GPIO chip selects using GPIO descriptors. As the RSPI controller always drives a native chip select when performing a transfer, at least one native chip select must be left unused. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20200102133822.29346-7-geert+renesas@glider.be Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
parent
9815ed8714
commit
144d8f9781
@ -242,6 +242,7 @@ struct spi_ops {
|
||||
u16 mode_bits;
|
||||
u16 flags;
|
||||
u16 fifo_size;
|
||||
u8 num_hw_ss;
|
||||
};
|
||||
|
||||
/*
|
||||
@ -934,7 +935,8 @@ static int rspi_prepare_message(struct spi_controller *ctlr,
|
||||
rspi->spcmd |= SPCMD_CPHA;
|
||||
|
||||
/* Configure slave signal to assert */
|
||||
rspi->spcmd |= SPCMD_SSLA(spi->chip_select);
|
||||
rspi->spcmd |= SPCMD_SSLA(spi->cs_gpiod ? rspi->ctlr->unused_native_cs
|
||||
: spi->chip_select);
|
||||
|
||||
/* CMOS output mode and MOSI signal from previous transfer */
|
||||
rspi->sppcr = 0;
|
||||
@ -1123,6 +1125,7 @@ static const struct spi_ops rspi_ops = {
|
||||
.mode_bits = SPI_CPHA | SPI_CPOL | SPI_LOOP,
|
||||
.flags = SPI_CONTROLLER_MUST_TX,
|
||||
.fifo_size = 8,
|
||||
.num_hw_ss = 2,
|
||||
};
|
||||
|
||||
static const struct spi_ops rspi_rz_ops = {
|
||||
@ -1131,6 +1134,7 @@ static const struct spi_ops rspi_rz_ops = {
|
||||
.mode_bits = SPI_CPHA | SPI_CPOL | SPI_LOOP,
|
||||
.flags = SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_MUST_TX,
|
||||
.fifo_size = 8, /* 8 for TX, 32 for RX */
|
||||
.num_hw_ss = 1,
|
||||
};
|
||||
|
||||
static const struct spi_ops qspi_ops = {
|
||||
@ -1141,6 +1145,7 @@ static const struct spi_ops qspi_ops = {
|
||||
SPI_RX_DUAL | SPI_RX_QUAD,
|
||||
.flags = SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_MUST_TX,
|
||||
.fifo_size = 32,
|
||||
.num_hw_ss = 1,
|
||||
};
|
||||
|
||||
#ifdef CONFIG_OF
|
||||
@ -1256,6 +1261,8 @@ static int rspi_probe(struct platform_device *pdev)
|
||||
ctlr->mode_bits = ops->mode_bits;
|
||||
ctlr->flags = ops->flags;
|
||||
ctlr->dev.of_node = pdev->dev.of_node;
|
||||
ctlr->use_gpio_descriptors = true;
|
||||
ctlr->max_native_cs = rspi->ops->num_hw_ss;
|
||||
|
||||
ret = platform_get_irq_byname_optional(pdev, "rx");
|
||||
if (ret < 0) {
|
||||
|
Loading…
Reference in New Issue
Block a user