diff --git a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt index e13787498bcf..9b3f1d4a88d6 100644 --- a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt +++ b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt @@ -1,7 +1,10 @@ * Marvell PXA GPIO controller Required properties: -- compatible : Should be "mrvl,pxa-gpio" or "mrvl,mmp-gpio" +- compatible : Should be "intel,pxa25x-gpio", "intel,pxa26x-gpio", + "intel,pxa27x-gpio", "intel,pxa3xx-gpio", + "marvell,pxa93x-gpio", "marvell,mmp-gpio" or + "marvell,mmp2-gpio". - reg : Address and length of the register set for the device - interrupts : Should be the port interrupt shared by all gpio pins. There're three gpio interrupts in arch-pxa, and they're gpio0, @@ -18,7 +21,7 @@ Required properties: Example: gpio: gpio@d4019000 { - compatible = "mrvl,mmp-gpio"; + compatible = "marvell,mmp-gpio"; reg = <0xd4019000 0x1000>; interrupts = <49>; interrupt-name = "gpio_mux"; diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 5c8e59f6a6f4..f57a6ba26e04 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -330,6 +330,13 @@ choice Say Y here if you want kernel low-level debugging support on PicoXcell based platforms. + config DEBUG_PXA_UART1 + depends on ARCH_PXA + bool "Use PXA UART1 for low-level debug" + help + Say Y here if you want kernel low-level debugging support + on PXA UART1. + config DEBUG_REALVIEW_STD_PORT bool "RealView Default UART" depends on ARCH_REALVIEW @@ -615,6 +622,7 @@ config DEBUG_LL_INCLUDE default "debug/bcm2835.S" if DEBUG_BCM2835 default "debug/cns3xxx.S" if DEBUG_CNS3XXX default "debug/exynos.S" if DEBUG_EXYNOS_UART + default "debug/highbank.S" if DEBUG_HIGHBANK_UART default "debug/icedcc.S" if DEBUG_ICEDCC default "debug/imx.S" if DEBUG_IMX1_UART || \ DEBUG_IMX25_UART || \ @@ -624,20 +632,21 @@ config DEBUG_LL_INCLUDE DEBUG_IMX51_UART || \ DEBUG_IMX53_UART ||\ DEBUG_IMX6Q_UART - default "debug/highbank.S" if DEBUG_HIGHBANK_UART default "debug/mvebu.S" if DEBUG_MVEBU_UART default "debug/mxs.S" if DEBUG_IMX23_UART || DEBUG_IMX28_UART default "debug/nomadik.S" if DEBUG_NOMADIK_UART default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART default "debug/picoxcell.S" if DEBUG_PICOXCELL_UART + default "debug/pxa.S" if DEBUG_PXA_UART1 || DEBUG_MMP_UART2 || \ + DEBUG_MMP_UART3 default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1 default "debug/socfpga.S" if DEBUG_SOCFPGA_UART default "debug/sunxi.S" if DEBUG_SUNXI_UART0 || DEBUG_SUNXI_UART1 + default "debug/tegra.S" if DEBUG_TEGRA_UART + default "debug/ux500.S" if DEBUG_UX500_UART default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT || \ DEBUG_VEXPRESS_UART0_CA9 || DEBUG_VEXPRESS_UART0_RS1 default "debug/vt8500.S" if DEBUG_VT8500_UART0 - default "debug/tegra.S" if DEBUG_TEGRA_UART - default "debug/ux500.S" if DEBUG_UX500_UART default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1 default "mach/debug-macro.S" diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 55196639211d..853e199ea89f 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -61,7 +61,8 @@ dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \ dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \ integratorcp.dtb dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb -dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \ +dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \ + kirkwood-dns320.dtb \ kirkwood-dns325.dtb \ kirkwood-dockstar.dtb \ kirkwood-dreamplug.dtb \ @@ -75,6 +76,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \ kirkwood-lschlv2.dtb \ kirkwood-lsxhl.dtb \ kirkwood-mplcec4.dtb \ + kirkwood-netgear_readynas_duo_v2.dtb \ kirkwood-ns2.dtb \ kirkwood-ns2lite.dtb \ kirkwood-ns2max.dtb \ @@ -153,7 +155,9 @@ dtb-$(CONFIG_ARCH_U8500) += snowball.dtb \ ccu9540.dtb dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \ r8a7740-armadillo800eva.dtb \ + r8a7779-marzen-reference.dtb \ sh73a0-kzm9g.dtb \ + sh73a0-kzm9g-reference.dtb \ sh7372-mackerel.dtb dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_cyclone5.dtb \ socfpga_vt.dtb diff --git a/arch/arm/boot/dts/kirkwood-cloudbox.dts b/arch/arm/boot/dts/kirkwood-cloudbox.dts new file mode 100644 index 000000000000..5f21d4e427b0 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-cloudbox.dts @@ -0,0 +1,89 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" +/include/ "kirkwood-6281.dtsi" + +/ { + model = "LaCie CloudBox"; + compatible = "lacie,cloudbox", "marvell,kirkwood-88f6702", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8"; + }; + + ocp@f1000000 { + pinctrl: pinctrl@10000 { + pinctrl-0 = < &pmx_spi &pmx_uart0 + &pmx_cloudbox_sata0 >; + pinctrl-names = "default"; + + pmx_cloudbox_sata0: pmx-cloudbox-sata0 { + marvell,pins = "mpp15"; + marvell,function = "sata0"; + }; + }; + + serial@12000 { + clock-frequency = <166666667>; + status = "okay"; + }; + + sata@80000 { + status = "okay"; + nr-ports = <1>; + }; + + spi@10600 { + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l4005a"; + reg = <0>; + spi-max-frequency = <20000000>; + mode = <0>; + + partition@0 { + reg = <0x0 0x80000>; + label = "u-boot"; + }; + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + label = "Power push button"; + linux,code = <116>; + gpios = <&gpio0 16 1>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + red-fail { + label = "cloudbox:red:fail"; + gpios = <&gpio0 14 0>; + }; + blue-sata { + label = "cloudbox:blue:sata"; + gpios = <&gpio0 15 0>; + }; + }; + + gpio_poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio0 17 0>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts new file mode 100644 index 000000000000..1ca66ab83ad6 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts @@ -0,0 +1,180 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" +/include/ "kirkwood-6282.dtsi" + +/ { + model = "NETGEAR ReadyNAS Duo v2"; + compatible = "netgear,readynas-duo-v2", "netgear,readynas", "marvell,kirkwood-88f6282", "marvell,kirkwood"; + + memory { /* 256 MB */ + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pinctrl-0 = < &pmx_uart0 + &pmx_button_power + &pmx_button_backup + &pmx_button_reset + &pmx_led_blue_power + &pmx_led_blue_activity + &pmx_led_blue_disk1 + &pmx_led_blue_disk2 + &pmx_led_blue_backup >; + pinctrl-names = "default"; + + pmx_button_power: pmx-button-power { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + pmx_button_backup: pmx-button-backup { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + pmx_button_reset: pmx-button-reset { + marvell,pins = "mpp13"; + marvell,function = "gpio"; + }; + pmx_led_blue_power: pmx-led-blue-power { + marvell,pins = "mpp31"; + marvell,function = "gpio"; + }; + pmx_led_blue_activity: pmx-led-blue-activity { + marvell,pins = "mpp38"; + marvell,function = "gpio"; + }; + pmx_led_blue_disk1: pmx-led-blue-disk1 { + marvell,pins = "mpp23"; + marvell,function = "gpio"; + }; + pmx_led_blue_disk2: pmx-led-blue-disk2 { + marvell,pins = "mpp22"; + marvell,function = "gpio"; + }; + pmx_led_blue_backup: pmx-led-blue-backup { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + }; + + i2c@11000 { + status = "okay"; + + rs5c372a: rs5c372a@32 { + compatible = "ricoh,rs5c372a"; + reg = <0x32>; + }; + }; + + serial@12000 { + status = "okay"; + }; + + nand@3000000 { + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x180000>; + read-only; + }; + + partition@180000 { + label = "u-boot-env"; + reg = <0x180000 0x20000>; + }; + + partition@200000 { + label = "uImage"; + reg = <0x0200000 0x600000>; + }; + + partition@800000 { + label = "minirootfs"; + reg = <0x0800000 0x1000000>; + }; + + partition@1800000 { + label = "jffs2"; + reg = <0x1800000 0x6800000>; + }; + }; + + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + power_led { + label = "status:blue:power_led"; + gpios = <&gpio0 31 1>; /* GPIO 31 Active Low */ + linux,default-trigger = "default-on"; + }; + activity_led { + label = "status:blue:activity_led"; + gpios = <&gpio1 6 1>; /* GPIO 38 Active Low */ + }; + disk1_led { + label = "status:blue:disk1_led"; + gpios = <&gpio0 23 1>; /* GPIO 23 Active Low */ + }; + disk2_led { + label = "status:blue:disk2_led"; + gpios = <&gpio0 22 1>; /* GPIO 22 Active Low */ + }; + backup_led { + label = "status:blue:backup_led"; + gpios = <&gpio0 29 1>; /* GPIO 29 Active Low*/ + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + button@1 { + label = "Power Button"; + linux,code = <116>; /* KEY_POWER */ + gpios = <&gpio1 15 1>; + }; + button@2 { + label = "Reset Button"; + linux,code = <0x198>; /* KEY_RESTART */ + gpios = <&gpio0 13 1>; + }; + button@3 { + label = "Backup Button"; + linux,code = <133>; /* KEY_COPY */ + gpios = <&gpio1 13 1>; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + usb_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "USB 3.0 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 14 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-ns2mini.dts b/arch/arm/boot/dts/kirkwood-ns2mini.dts index b79f5eb25589..adab1ab25733 100644 --- a/arch/arm/boot/dts/kirkwood-ns2mini.dts +++ b/arch/arm/boot/dts/kirkwood-ns2mini.dts @@ -3,6 +3,7 @@ /include/ "kirkwood-ns2-common.dtsi" / { + /* This machine is embedded in the first LaCie CloudBox product. */ model = "LaCie Network Space Mini v2"; compatible = "lacie,netspace_mini_v2", "marvell,kirkwood-88f6192", "marvell,kirkwood"; diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi index 1429ac05b36d..4e8b08c628c7 100644 --- a/arch/arm/boot/dts/mmp2.dtsi +++ b/arch/arm/boot/dts/mmp2.dtsi @@ -160,7 +160,7 @@ }; gpio@d4019000 { - compatible = "mrvl,mmp-gpio"; + compatible = "marvell,mmp2-gpio"; #address-cells = <1>; #size-cells = <1>; reg = <0xd4019000 0x1000>; diff --git a/arch/arm/boot/dts/pxa168.dtsi b/arch/arm/boot/dts/pxa168.dtsi index 31a718696080..975dad21ac38 100644 --- a/arch/arm/boot/dts/pxa168.dtsi +++ b/arch/arm/boot/dts/pxa168.dtsi @@ -77,7 +77,7 @@ }; gpio@d4019000 { - compatible = "mrvl,mmp-gpio"; + compatible = "marvell,mmp-gpio"; #address-cells = <1>; #size-cells = <1>; reg = <0xd4019000 0x1000>; diff --git a/arch/arm/boot/dts/pxa910.dtsi b/arch/arm/boot/dts/pxa910.dtsi index 825aaca33034..0247c622f580 100644 --- a/arch/arm/boot/dts/pxa910.dtsi +++ b/arch/arm/boot/dts/pxa910.dtsi @@ -89,7 +89,7 @@ }; gpio@d4019000 { - compatible = "mrvl,mmp-gpio"; + compatible = "marvell,mmp-gpio"; #address-cells = <1>; #size-cells = <1>; reg = <0xd4019000 0x1000>; diff --git a/arch/arm/boot/dts/r8a7779-marzen-reference.dts b/arch/arm/boot/dts/r8a7779-marzen-reference.dts new file mode 100644 index 000000000000..72be4c87cfb5 --- /dev/null +++ b/arch/arm/boot/dts/r8a7779-marzen-reference.dts @@ -0,0 +1,47 @@ +/* + * Reference Device Tree Source for the Marzen board + * + * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013 Simon Horman + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +/include/ "r8a7779.dtsi" + +/ { + model = "marzen"; + compatible = "renesas,marzen-reference", "renesas,r8a7779"; + + chosen { + bootargs = "console=ttySC2,115200 earlyprintk=sh-sci.2,115200 ignore_loglevel root=/dev/nfs ip=on"; + }; + + memory { + device_type = "memory"; + reg = <0x60000000 0x40000000>; + }; + + fixedregulator3v3: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + lan0@18000000 { + compatible = "smsc,lan9220", "smsc,lan9115"; + reg = <0x18000000 0x100>; + phy-mode = "mii"; + interrupt-parent = <&gic>; + interrupts = <0 28 0x4>; + reg-io-width = <4>; + vddvario-supply = <&fixedregulator3v3>; + vdd33a-supply = <&fixedregulator3v3>; + }; +}; diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts new file mode 100644 index 000000000000..f33b5ccb7446 --- /dev/null +++ b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts @@ -0,0 +1,66 @@ +/* + * Device Tree Source for the KZM-A9-GT board + * + * Copyright (C) 2012 Horms Solutions Ltd. + * + * Based on sh73a0-kzm9g.dts + * Copyright (C) 2012 Renesas Solutions Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +/include/ "sh73a0.dtsi" + +/ { + model = "KZM-A9-GT"; + compatible = "renesas,kzm9g-reference", "renesas,sh73a0"; + + chosen { + bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel earlyprintk=sh-sci.4,115200"; + }; + + memory { + device_type = "memory"; + reg = <0x41000000 0x1e800000>; + }; + + reg_1p8v: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_3p3v: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&mmcif { + bus-width = <8>; + vmmc-supply = <®_1p8v>; + status = "okay"; +}; + +&sdhi0 { + vmmc-supply = <®_3p3v>; + bus-width = <4>; + status = "okay"; +}; + +&sdhi2 { + vmmc-supply = <®_3p3v>; + bus-width = <4>; + broken-cd; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sh73a0-reference.dtsi b/arch/arm/boot/dts/sh73a0-reference.dtsi deleted file mode 100644 index d4bb0125b2b2..000000000000 --- a/arch/arm/boot/dts/sh73a0-reference.dtsi +++ /dev/null @@ -1,24 +0,0 @@ -/* - * Device Tree Source for the SH73A0 SoC - * - * Copyright (C) 2012 Renesas Solutions Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -/include/ "sh73a0.dtsi" - -/ { - compatible = "renesas,sh73a0"; - - mmcif: mmcif@0x10010000 { - compatible = "renesas,sh-mmcif"; - reg = <0xe6bd0000 0x100>; - interrupt-parent = <&gic>; - interrupts = <0 140 0x4 - 0 141 0x4>; - reg-io-width = <4>; - }; -}; diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index 8a59465d0231..3e4d383ac6d9 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -97,4 +97,48 @@ 0 189 0x4 0 190 0x4>; }; + + mmcif: mmcif@0x10010000 { + compatible = "renesas,sh-mmcif"; + reg = <0xe6bd0000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 140 0x4 + 0 141 0x4>; + reg-io-width = <4>; + status = "disabled"; + }; + + sdhi0: sdhi@0xee100000 { + compatible = "renesas,r8a7740-sdhi"; + reg = <0xee100000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 83 4 + 0 84 4 + 0 85 4>; + cap-sd-highspeed; + status = "disabled"; + }; + + /* SDHI1 and SDHI2 have no CD pins, no need for CD IRQ */ + sdhi1: sdhi@0xee120000 { + compatible = "renesas,r8a7740-sdhi"; + reg = <0xee120000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 88 4 + 0 89 4>; + toshiba,mmc-wrprotect-disable; + cap-sd-highspeed; + status = "disabled"; + }; + + sdhi2: sdhi@0xee140000 { + compatible = "renesas,r8a7740-sdhi"; + reg = <0xee140000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 104 4 + 0 105 4>; + toshiba,mmc-wrprotect-disable; + cap-sd-highspeed; + status = "disabled"; + }; }; diff --git a/arch/arm/configs/da8xx_omapl_defconfig b/arch/arm/configs/da8xx_omapl_defconfig index 9aaad36a1728..7c868139bdb0 100644 --- a/arch/arm/configs/da8xx_omapl_defconfig +++ b/arch/arm/configs/da8xx_omapl_defconfig @@ -5,6 +5,7 @@ CONFIG_POSIX_MQUEUE=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 +CONFIG_CGROUPS=y CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y CONFIG_MODULES=y diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index 3edc78a40b66..c86fd75e181a 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig @@ -5,6 +5,7 @@ CONFIG_POSIX_MQUEUE=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 +CONFIG_CGROUPS=y CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y CONFIG_MODULES=y diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig index 3d8667f648b8..a1d8252e9ec7 100644 --- a/arch/arm/configs/kirkwood_defconfig +++ b/arch/arm/configs/kirkwood_defconfig @@ -10,45 +10,48 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set CONFIG_ARCH_KIRKWOOD=y +CONFIG_MACH_D2NET_V2=y CONFIG_MACH_DB88F6281_BP=y -CONFIG_MACH_RD88F6192_NAS=y -CONFIG_MACH_RD88F6281=y -CONFIG_MACH_MV88F6281GTW_GE=y -CONFIG_MACH_SHEEVAPLUG=y +CONFIG_MACH_DOCKSTAR=y CONFIG_MACH_ESATA_SHEEVAPLUG=y CONFIG_MACH_GURUPLUG=y -CONFIG_MACH_DREAMPLUG_DT=y -CONFIG_MACH_ICONNECT_DT=y -CONFIG_MACH_DLINK_KIRKWOOD_DT=y -CONFIG_MACH_IB62X0_DT=y -CONFIG_MACH_TS219_DT=y -CONFIG_MACH_DOCKSTAR_DT=y -CONFIG_MACH_GOFLEXNET_DT=y -CONFIG_MACH_LSXL_DT=y -CONFIG_MACH_IOMEGA_IX2_200_DT=y -CONFIG_MACH_KM_KIRKWOOD_DT=y -CONFIG_MACH_INETSPACE_V2_DT=y -CONFIG_MACH_MPLCEC4_DT=y -CONFIG_MACH_NETSPACE_V2_DT=y -CONFIG_MACH_NETSPACE_MAX_V2_DT=y -CONFIG_MACH_NETSPACE_LITE_V2_DT=y -CONFIG_MACH_NETSPACE_MINI_V2_DT=y -CONFIG_MACH_OPENBLOCKS_A6_DT=y -CONFIG_MACH_TOPKICK_DT=y -CONFIG_MACH_TS219=y -CONFIG_MACH_TS41X=y -CONFIG_MACH_DOCKSTAR=y +CONFIG_MACH_INETSPACE_V2=y +CONFIG_MACH_MV88F6281GTW_GE=y +CONFIG_MACH_NET2BIG_V2=y +CONFIG_MACH_NET5BIG_V2=y +CONFIG_MACH_NETSPACE_MAX_V2=y +CONFIG_MACH_NETSPACE_V2=y CONFIG_MACH_OPENRD_BASE=y CONFIG_MACH_OPENRD_CLIENT=y CONFIG_MACH_OPENRD_ULTIMATE=y -CONFIG_MACH_NETSPACE_V2=y -CONFIG_MACH_INETSPACE_V2=y -CONFIG_MACH_NETSPACE_MAX_V2=y -CONFIG_MACH_D2NET_V2=y -CONFIG_MACH_NET2BIG_V2=y -CONFIG_MACH_NET5BIG_V2=y +CONFIG_MACH_RD88F6192_NAS=y +CONFIG_MACH_RD88F6281=y +CONFIG_MACH_SHEEVAPLUG=y CONFIG_MACH_T5325=y +CONFIG_MACH_TS219=y +CONFIG_MACH_TS41X=y +CONFIG_MACH_CLOUDBOX_DT=y +CONFIG_MACH_DLINK_KIRKWOOD_DT=y +CONFIG_MACH_DOCKSTAR_DT=y +CONFIG_MACH_DREAMPLUG_DT=y +CONFIG_MACH_GOFLEXNET_DT=y +CONFIG_MACH_GURUPLUG_DT=y +CONFIG_MACH_IB62X0_DT=y +CONFIG_MACH_ICONNECT_DT=y +CONFIG_MACH_INETSPACE_V2_DT=y +CONFIG_MACH_IOMEGA_IX2_200_DT=y +CONFIG_MACH_KM_KIRKWOOD_DT=y +CONFIG_MACH_LSXL_DT=y +CONFIG_MACH_MPLCEC4_DT=y +CONFIG_MACH_NETSPACE_LITE_V2_DT=y +CONFIG_MACH_NETSPACE_MAX_V2_DT=y +CONFIG_MACH_NETSPACE_MINI_V2_DT=y +CONFIG_MACH_NETSPACE_V2_DT=y CONFIG_MACH_NSA310_DT=y +CONFIG_MACH_OPENBLOCKS_A6_DT=y +CONFIG_MACH_READYNAS_DT=y +CONFIG_MACH_TOPKICK_DT=y +CONFIG_MACH_TS219_DT=y # CONFIG_CPU_FEROCEON_OLD_ID is not set CONFIG_PREEMPT=y CONFIG_AEABI=y diff --git a/arch/arm/configs/msm_defconfig b/arch/arm/configs/msm_defconfig index 2b8f7affc1eb..690b5f9c7462 100644 --- a/arch/arm/configs/msm_defconfig +++ b/arch/arm/configs/msm_defconfig @@ -1,72 +1,137 @@ -CONFIG_EXPERIMENTAL=y +CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_BLK_DEV_INITRD=y -CONFIG_SLAB=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS_ALL=y +CONFIG_EMBEDDED=y +# CONFIG_SLUB_DEBUG is not set +# CONFIG_COMPAT_BRK is not set +CONFIG_PROFILING=y +CONFIG_OPROFILE=y +CONFIG_KPROBES=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_PARTITION_ADVANCED=y CONFIG_ARCH_MSM=y -CONFIG_MACH_HALIBUT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y +CONFIG_ARCH_MSM8X60=y +CONFIG_ARCH_MSM8960=y +CONFIG_SMP=y CONFIG_PREEMPT=y CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=64M console=ttyMSM,115200n8" -CONFIG_PM=y +CONFIG_HIGHMEM=y +CONFIG_HIGHPTE=y +CONFIG_CLEANCACHE=y +CONFIG_CC_STACKPROTECTOR=y +CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ATAG_DTB_COMPAT=y +CONFIG_AUTO_ZRELADDR=y +CONFIG_VFP=y +CONFIG_NEON=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_NET=y +CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_INET=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_DIAG is not set +# CONFIG_INET_LRO is not set # CONFIG_IPV6 is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y +CONFIG_CFG80211=y +CONFIG_RFKILL=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_SCSI=y +CONFIG_SCSI_TGT=y +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_SG=y +CONFIG_CHR_DEV_SCH=y +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_CONSTANTS=y +CONFIG_SCSI_LOGGING=y +CONFIG_SCSI_SCAN_ASYNC=y CONFIG_NETDEVICES=y CONFIG_DUMMY=y -CONFIG_NET_ETHERNET=y -CONFIG_SMC91X=y -CONFIG_PPP=y -CONFIG_PPP_ASYNC=y -CONFIG_PPP_DEFLATE=y -CONFIG_PPP_BSDCOMP=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_PHYLIB=y +CONFIG_SLIP=y +CONFIG_SLIP_COMPRESSED=y +CONFIG_SLIP_MODE_SLIP6=y +CONFIG_USB_USBNET=y +# CONFIG_USB_NET_AX8817X is not set +# CONFIG_USB_NET_ZAURUS is not set CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_INPUT_MOUSE is not set +# CONFIG_MOUSE_PS2 is not set +CONFIG_INPUT_JOYSTICK=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_INPUT_MISC=y -# CONFIG_SERIO is not set -CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_INPUT_UINPUT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_MSM=y CONFIG_SERIAL_MSM_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_HW_RANDOM is not set +CONFIG_HW_RANDOM=y CONFIG_I2C=y -# CONFIG_HWMON is not set -CONFIG_VIDEO_OUTPUT_CONTROL=y +CONFIG_I2C_CHARDEV=y +CONFIG_SPI=y +CONFIG_SSBI=y +CONFIG_DEBUG_GPIO=y +CONFIG_GPIO_SYSFS=y +CONFIG_POWER_SUPPLY=y +CONFIG_THERMAL=y +CONFIG_REGULATOR=y +CONFIG_MEDIA_SUPPORT=y CONFIG_FB=y -CONFIG_FB_MODE_HELPERS=y -CONFIG_FB_TILEBLITTING=y -CONFIG_FB_MSM=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_DYNAMIC_MINORS=y +# CONFIG_SND_ARM is not set +# CONFIG_SND_SPI is not set +# CONFIG_SND_USB is not set +CONFIG_SND_SOC=y +CONFIG_HID_BATTERY_STRENGTH=y +CONFIG_USB=y +CONFIG_USB_PHY=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y +CONFIG_USB_MON=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_MSM=y +CONFIG_USB_ACM=y +CONFIG_USB_SERIAL=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_DEBUG_FILES=y +CONFIG_USB_GADGET_VBUS_DRAW=500 CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_INOTIFY=y +CONFIG_RTC_CLASS=y +CONFIG_STAGING=y +CONFIG_MSM_IOMMU=y +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT4_FS=y +CONFIG_FUSE_FS=y +CONFIG_VFAT_FS=y CONFIG_TMPFS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_CIFS=y +CONFIG_PRINTK_TIME=y CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -CONFIG_SCHEDSTATS=y -CONFIG_DEBUG_MUTEXES=y -CONFIG_DEBUG_SPINLOCK_SLEEP=y +CONFIG_LOCKUP_DETECTOR=y +# CONFIG_DETECT_HUNG_TASK is not set +# CONFIG_SCHED_DEBUG is not set +CONFIG_TIMER_STATS=y CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_LL=y +CONFIG_DYNAMIC_DEBUG=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index bd07864f14a0..33903ca0d879 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -93,6 +93,7 @@ CONFIG_BLK_DEV_RAM_SIZE=16384 CONFIG_SENSORS_LIS3LV02D=m CONFIG_SENSORS_TSL2550=m CONFIG_SENSORS_LIS3_I2C=m +CONFIG_BMP085_I2C=m CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y diff --git a/arch/arm/include/debug/pxa.S b/arch/arm/include/debug/pxa.S new file mode 100644 index 000000000000..e1e795aa3d7f --- /dev/null +++ b/arch/arm/include/debug/pxa.S @@ -0,0 +1,33 @@ +/* + * Early serial output macro for Marvell PXA/MMP SoC + * + * Copyright (C) 1994-1999 Russell King + * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks + * + * Copyright (C) 2013 Haojian Zhuang + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#if defined(CONFIG_DEBUG_PXA_UART1) +#define PXA_UART_REG_PHYS_BASE 0x40100000 +#define PXA_UART_REG_VIRT_BASE 0xf2100000 +#elif defined(CONFIG_DEBUG_MMP_UART2) +#define PXA_UART_REG_PHYS_BASE 0xd4017000 +#define PXA_UART_REG_VIRT_BASE 0xfe017000 +#elif defined(CONFIG_DEBUG_MMP_UART3) +#define PXA_UART_REG_PHYS_BASE 0xd4018000 +#define PXA_UART_REG_VIRT_BASE 0xfe018000 +#else +#error "Select uart for DEBUG_LL" +#endif + + .macro addruart, rp, rv, tmp + ldr \rp, =PXA_UART_REG_PHYS_BASE + ldr \rv, =PXA_UART_REG_VIRT_BASE + .endm + +#define UART_SHIFT 2 +#include diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index 12e6f756361d..1332de8c52c9 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -297,11 +297,7 @@ static const short da830_evm_emif25_pins[] = { -1 }; -#if defined(CONFIG_MMC_DAVINCI) || defined(CONFIG_MMC_DAVINCI_MODULE) -#define HAS_MMC 1 -#else -#define HAS_MMC 0 -#endif +#define HAS_MMC IS_ENABLED(CONFIG_MMC_DAVINCI) #ifdef CONFIG_DA830_UI_NAND static struct mtd_partition da830_evm_nand_partitions[] = { diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index dcc8710936a5..8a24b6c6339f 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -335,12 +335,7 @@ static const short da850_evm_nor_pins[] = { -1 }; -#if defined(CONFIG_MMC_DAVINCI) || \ - defined(CONFIG_MMC_DAVINCI_MODULE) -#define HAS_MMC 1 -#else -#define HAS_MMC 0 -#endif +#define HAS_MMC IS_ENABLED(CONFIG_MMC_DAVINCI) static inline void da850_evm_setup_nor_nand(void) { @@ -401,7 +396,7 @@ enum da850_evm_ui_exp_pins { DA850_EVM_UI_EXP_PB1, }; -static const char const *da850_evm_ui_exp[] = { +static const char * const da850_evm_ui_exp[] = { [DA850_EVM_UI_EXP_SEL_C] = "sel_c", [DA850_EVM_UI_EXP_SEL_B] = "sel_b", [DA850_EVM_UI_EXP_SEL_A] = "sel_a", @@ -565,7 +560,7 @@ enum da850_evm_bb_exp_pins { DA850_EVM_BB_EXP_USER_SW8 }; -static const char const *da850_evm_bb_exp[] = { +static const char * const da850_evm_bb_exp[] = { [DA850_EVM_BB_EXP_DEEP_SLEEP_EN] = "deep_sleep_en", [DA850_EVM_BB_EXP_SW_RST] = "sw_rst", [DA850_EVM_BB_EXP_TP_23] = "tp_23", @@ -1577,6 +1572,11 @@ static __init void da850_evm_init(void) pr_warn("%s: SATA registration failed: %d\n", __func__, ret); da850_evm_setup_mac_addr(); + + ret = da8xx_register_rproc(); + if (ret) + pr_warn("%s: dsp/rproc registration failed: %d\n", + __func__, ret); } #ifdef CONFIG_SERIAL_8250_CONSOLE @@ -1604,4 +1604,5 @@ MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138/AM18x EVM") .init_late = davinci_init_late, .dma_zone_size = SZ_128M, .restart = da8xx_restart, + .reserve = da8xx_rproc_reserve_cma, MACHINE_END diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index e62108fd7926..a33686a6fbb2 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -749,26 +749,11 @@ static int davinci_phy_fixup(struct phy_device *phydev) return 0; } -#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ - defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) -#define HAS_ATA 1 -#else -#define HAS_ATA 0 -#endif +#define HAS_ATA IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710) -#if defined(CONFIG_MTD_PHYSMAP) || \ - defined(CONFIG_MTD_PHYSMAP_MODULE) -#define HAS_NOR 1 -#else -#define HAS_NOR 0 -#endif +#define HAS_NOR IS_ENABLED(CONFIG_MTD_PHYSMAP) -#if defined(CONFIG_MTD_NAND_DAVINCI) || \ - defined(CONFIG_MTD_NAND_DAVINCI_MODULE) -#define HAS_NAND 1 -#else -#define HAS_NAND 0 -#endif +#define HAS_NAND IS_ENABLED(CONFIG_MTD_NAND_DAVINCI) static __init void davinci_evm_init(void) { diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index fc4871ac1c2c..fbb8e5ab1dc1 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -117,12 +117,7 @@ static struct platform_device davinci_nand_device = { }, }; -#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ - defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) -#define HAS_ATA 1 -#else -#define HAS_ATA 0 -#endif +#define HAS_ATA IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710) /* CPLD Register 0 bits to control ATA */ #define DM646X_EVM_ATA_RST BIT(0) diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c index b70e83c03bed..2bc112adf565 100644 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -166,20 +166,9 @@ static struct davinci_mmc_config davinci_ntosd2_mmc_config = { .wires = 4, }; +#define HAS_ATA IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710) -#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ - defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) -#define HAS_ATA 1 -#else -#define HAS_ATA 0 -#endif - -#if defined(CONFIG_MTD_NAND_DAVINCI) || \ - defined(CONFIG_MTD_NAND_DAVINCI_MODULE) -#define HAS_NAND 1 -#else -#define HAS_NAND 0 -#endif +#define HAS_NAND IS_ENABLED(CONFIG_MTD_NAND_DAVINCI) static __init void davinci_ntosd2_init(void) { diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c index 328dbd8a37f5..b8c20de10ca2 100644 --- a/arch/arm/mach-davinci/board-omapl138-hawk.c +++ b/arch/arm/mach-davinci/board-omapl138-hawk.c @@ -310,6 +310,11 @@ static __init void omapl138_hawk_init(void) if (ret) pr_warn("%s: watchdog registration failed: %d\n", __func__, ret); + + ret = da8xx_register_rproc(); + if (ret) + pr_warn("%s: dsp/rproc registration failed: %d\n", + __func__, ret); } #ifdef CONFIG_SERIAL_8250_CONSOLE @@ -337,4 +342,5 @@ MACHINE_START(OMAPL138_HAWKBOARD, "AM18x/OMAP-L138 Hawkboard") .init_late = davinci_init_late, .dma_zone_size = SZ_128M, .restart = da8xx_restart, + .reserve = da8xx_rproc_reserve_cma, MACHINE_END diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index f6927df2dda8..a7068a3aa9d3 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c @@ -119,7 +119,7 @@ void __init davinci_init_ide(void) platform_device_register(&ide_device); } -#if defined(CONFIG_MMC_DAVINCI) || defined(CONFIG_MMC_DAVINCI_MODULE) +#if IS_ENABLED(CONFIG_MMC_DAVINCI) static u64 mmcsd0_dma_mask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c index 2b4c648f99b6..b0a6b522575f 100644 --- a/arch/arm/mach-davinci/usb.c +++ b/arch/arm/mach-davinci/usb.c @@ -18,7 +18,7 @@ #define DA8XX_USB0_BASE 0x01e00000 #define DA8XX_USB1_BASE 0x01e25000 -#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) static struct musb_hdrc_eps_bits musb_eps[] = { { "ep1_tx", 8, }, { "ep1_rx", 8, }, diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index 7b6a64bc5f40..7509a89af967 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -2,35 +2,23 @@ if ARCH_KIRKWOOD menu "Marvell Kirkwood Implementations" +config MACH_D2NET_V2 + bool "LaCie d2 Network v2 NAS Board" + help + Say 'Y' here if you want your kernel to support the + LaCie d2 Network v2 NAS. + config MACH_DB88F6281_BP bool "Marvell DB-88F6281-BP Development Board" help Say 'Y' here if you want your kernel to support the Marvell DB-88F6281-BP Development Board. -config MACH_RD88F6192_NAS - bool "Marvell RD-88F6192-NAS Reference Board" +config MACH_DOCKSTAR + bool "Seagate FreeAgent DockStar" help Say 'Y' here if you want your kernel to support the - Marvell RD-88F6192-NAS Reference Board. - -config MACH_RD88F6281 - bool "Marvell RD-88F6281 Reference Board" - help - Say 'Y' here if you want your kernel to support the - Marvell RD-88F6281 Reference Board. - -config MACH_MV88F6281GTW_GE - bool "Marvell 88F6281 GTW GE Board" - help - Say 'Y' here if you want your kernel to support the - Marvell 88F6281 GTW GE Board. - -config MACH_SHEEVAPLUG - bool "Marvell SheevaPlug Reference Board" - help - Say 'Y' here if you want your kernel to support the - Marvell SheevaPlug Reference Board. + Seagate FreeAgent DockStar. config MACH_ESATA_SHEEVAPLUG bool "Marvell eSATA SheevaPlug Reference Board" @@ -44,182 +32,41 @@ config MACH_GURUPLUG Say 'Y' here if you want your kernel to support the Marvell GuruPlug Reference Board. -config ARCH_KIRKWOOD_DT - bool "Marvell Kirkwood Flattened Device Tree" - select POWER_SUPPLY - select POWER_RESET - select POWER_RESET_GPIO - select REGULATOR - select REGULATOR_FIXED_VOLTAGE - select MVEBU_CLK_CORE - select MVEBU_CLK_GATING - select USE_OF +config MACH_INETSPACE_V2 + bool "LaCie Internet Space v2 NAS Board" help Say 'Y' here if you want your kernel to support the - Marvell Kirkwood using flattened device tree. + LaCie Internet Space v2 NAS. -config MACH_GURUPLUG_DT - bool "Marvell GuruPlug Reference Board (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT +config MACH_MV88F6281GTW_GE + bool "Marvell 88F6281 GTW GE Board" help Say 'Y' here if you want your kernel to support the - Marvell GuruPlug Reference Board (Flattened Device Tree). + Marvell 88F6281 GTW GE Board. -config MACH_DREAMPLUG_DT - bool "Marvell DreamPlug (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT +config MACH_NET2BIG_V2 + bool "LaCie 2Big Network v2 NAS Board" help Say 'Y' here if you want your kernel to support the - Marvell DreamPlug (Flattened Device Tree). + LaCie 2Big Network v2 NAS. -config MACH_ICONNECT_DT - bool "Iomega Iconnect (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here to enable Iomega Iconnect support. - -config MACH_DLINK_KIRKWOOD_DT - bool "D-Link Kirkwood-based NAS (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT +config MACH_NET5BIG_V2 + bool "LaCie 5Big Network v2 NAS Board" help Say 'Y' here if you want your kernel to support the - Kirkwood-based D-Link NASes such as DNS-320 & DNS-325, - using Flattened Device Tree. + LaCie 5Big Network v2 NAS. -config MACH_IB62X0_DT - bool "RaidSonic IB-NAS6210, IB-NAS6220 (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT +config MACH_NETSPACE_MAX_V2 + bool "LaCie Network Space Max v2 NAS Board" help Say 'Y' here if you want your kernel to support the - RaidSonic IB-NAS6210 & IB-NAS6220 devices, using - Flattened Device Tree. + LaCie Network Space Max v2 NAS. -config MACH_TS219_DT - bool "Device Tree for QNAP TS-11X, TS-21X NAS" - select ARCH_KIRKWOOD_DT - select ARM_APPENDED_DTB - select ARM_ATAG_DTB_COMPAT - help - Say 'Y' here if you want your kernel to support the QNAP - TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and - TS-219P+ Turbo NAS devices using Fattened Device Tree. - There are two different Device Tree descriptions, depending - on if the device is based on an if the board uses the MV6281 - or MV6282. If you have the wrong one, the buttons will not - work. - -config MACH_DOCKSTAR_DT - bool "Seagate FreeAgent Dockstar (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT +config MACH_NETSPACE_V2 + bool "LaCie Network Space v2 NAS Board" help Say 'Y' here if you want your kernel to support the - Seagate FreeAgent Dockstar (Flattened Device Tree). - -config MACH_GOFLEXNET_DT - bool "Seagate GoFlex Net (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the - Seagate GoFlex Net (Flattened Device Tree). - -config MACH_LSXL_DT - bool "Buffalo Linkstation LS-XHL, LS-CHLv2 (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the - Buffalo Linkstation LS-XHL & LS-CHLv2 devices, using - Flattened Device Tree. - -config MACH_IOMEGA_IX2_200_DT - bool "Iomega StorCenter ix2-200 (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the - Iomega StorCenter ix2-200 (Flattened Device Tree). - -config MACH_KM_KIRKWOOD_DT - bool "Keymile Kirkwood Reference Design (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the - Keymile Kirkwood Reference Desgin, using Flattened Device Tree. - -config MACH_INETSPACE_V2_DT - bool "LaCie Internet Space v2 NAS (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the LaCie - Internet Space v2 NAS, using Flattened Device Tree. - -config MACH_MPLCEC4_DT - bool "MPL CEC4 (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the - MPL CEC4 (Flattened Device Tree). - -config MACH_NETSPACE_V2_DT - bool "LaCie Network Space v2 NAS (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the LaCie - Network Space v2 NAS, using Flattened Device Tree. - -config MACH_NETSPACE_MAX_V2_DT - bool "LaCie Network Space Max v2 NAS (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the LaCie - Network Space Max v2 NAS, using Flattened Device Tree. - -config MACH_NETSPACE_LITE_V2_DT - bool "LaCie Network Space Lite v2 NAS (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the LaCie - Network Space Lite v2 NAS, using Flattened Device Tree. - -config MACH_NETSPACE_MINI_V2_DT - bool "LaCie Network Space Mini v2 NAS (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the LaCie - Network Space Mini v2 NAS (aka SafeBox), using Flattened - Device Tree. - -config MACH_OPENBLOCKS_A6_DT - bool "Plat'Home OpenBlocks A6 (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the - Plat'Home OpenBlocks A6 (Flattened Device Tree). - -config MACH_TOPKICK_DT - bool "USI Topkick (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the - USI Topkick, using Flattened Device Tree - -config MACH_TS219 - bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS" - help - Say 'Y' here if you want your kernel to support the - QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and - TS-219P+ Turbo NAS devices. - -config MACH_TS41X - bool "QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo NAS" - help - Say 'Y' here if you want your kernel to support the - QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo - NAS devices. - -config MACH_DOCKSTAR - bool "Seagate FreeAgent DockStar" - help - Say 'Y' here if you want your kernel to support the - Seagate FreeAgent DockStar. + LaCie Network Space v2 NAS. config MACH_OPENRD bool @@ -245,41 +92,23 @@ config MACH_OPENRD_ULTIMATE Say 'Y' here if you want your kernel to support the Marvell OpenRD Ultimate Board. -config MACH_NETSPACE_V2 - bool "LaCie Network Space v2 NAS Board" +config MACH_RD88F6192_NAS + bool "Marvell RD-88F6192-NAS Reference Board" help Say 'Y' here if you want your kernel to support the - LaCie Network Space v2 NAS. + Marvell RD-88F6192-NAS Reference Board. -config MACH_INETSPACE_V2 - bool "LaCie Internet Space v2 NAS Board" +config MACH_RD88F6281 + bool "Marvell RD-88F6281 Reference Board" help Say 'Y' here if you want your kernel to support the - LaCie Internet Space v2 NAS. + Marvell RD-88F6281 Reference Board. -config MACH_NETSPACE_MAX_V2 - bool "LaCie Network Space Max v2 NAS Board" +config MACH_SHEEVAPLUG + bool "Marvell SheevaPlug Reference Board" help Say 'Y' here if you want your kernel to support the - LaCie Network Space Max v2 NAS. - -config MACH_D2NET_V2 - bool "LaCie d2 Network v2 NAS Board" - help - Say 'Y' here if you want your kernel to support the - LaCie d2 Network v2 NAS. - -config MACH_NET2BIG_V2 - bool "LaCie 2Big Network v2 NAS Board" - help - Say 'Y' here if you want your kernel to support the - LaCie 2Big Network v2 NAS. - -config MACH_NET5BIG_V2 - bool "LaCie 5Big Network v2 NAS Board" - help - Say 'Y' here if you want your kernel to support the - LaCie 5Big Network v2 NAS. + Marvell SheevaPlug Reference Board. config MACH_T5325 bool "HP t5325 Thin Client" @@ -287,6 +116,162 @@ config MACH_T5325 Say 'Y' here if you want your kernel to support the HP t5325 Thin Client. +config MACH_TS219 + bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS" + help + Say 'Y' here if you want your kernel to support the + QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and + TS-219P+ Turbo NAS devices. + +config MACH_TS41X + bool "QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo NAS" + help + Say 'Y' here if you want your kernel to support the + QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo + NAS devices. + +comment "Device tree entries" + +config ARCH_KIRKWOOD_DT + bool "Marvell Kirkwood Flattened Device Tree" + select POWER_SUPPLY + select POWER_RESET + select POWER_RESET_GPIO + select REGULATOR + select REGULATOR_FIXED_VOLTAGE + select MVEBU_CLK_CORE + select MVEBU_CLK_GATING + select USE_OF + help + Say 'Y' here if you want your kernel to support the + Marvell Kirkwood using flattened device tree. + +config MACH_CLOUDBOX_DT + bool "LaCie CloudBox NAS (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the LaCie + CloudBox NAS, using Flattened Device Tree. + +config MACH_DLINK_KIRKWOOD_DT + bool "D-Link Kirkwood-based NAS (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the + Kirkwood-based D-Link NASes such as DNS-320 & DNS-325, + using Flattened Device Tree. + +config MACH_DOCKSTAR_DT + bool "Seagate FreeAgent Dockstar (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the + Seagate FreeAgent Dockstar (Flattened Device Tree). + +config MACH_DREAMPLUG_DT + bool "Marvell DreamPlug (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the + Marvell DreamPlug (Flattened Device Tree). + +config MACH_GOFLEXNET_DT + bool "Seagate GoFlex Net (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the + Seagate GoFlex Net (Flattened Device Tree). + +config MACH_GURUPLUG_DT + bool "Marvell GuruPlug Reference Board (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the + Marvell GuruPlug Reference Board (Flattened Device Tree). + +config MACH_IB62X0_DT + bool "RaidSonic IB-NAS6210, IB-NAS6220 (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the + RaidSonic IB-NAS6210 & IB-NAS6220 devices, using + Flattened Device Tree. + +config MACH_ICONNECT_DT + bool "Iomega Iconnect (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here to enable Iomega Iconnect support. + +config MACH_INETSPACE_V2_DT + bool "LaCie Internet Space v2 NAS (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the LaCie + Internet Space v2 NAS, using Flattened Device Tree. + +config MACH_IOMEGA_IX2_200_DT + bool "Iomega StorCenter ix2-200 (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the + Iomega StorCenter ix2-200 (Flattened Device Tree). + +config MACH_KM_KIRKWOOD_DT + bool "Keymile Kirkwood Reference Design (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the + Keymile Kirkwood Reference Desgin, using Flattened Device Tree. + +config MACH_LSXL_DT + bool "Buffalo Linkstation LS-XHL, LS-CHLv2 (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the + Buffalo Linkstation LS-XHL & LS-CHLv2 devices, using + Flattened Device Tree. + +config MACH_MPLCEC4_DT + bool "MPL CEC4 (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the + MPL CEC4 (Flattened Device Tree). + +config MACH_NETSPACE_LITE_V2_DT + bool "LaCie Network Space Lite v2 NAS (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the LaCie + Network Space Lite v2 NAS, using Flattened Device Tree. + +config MACH_NETSPACE_MAX_V2_DT + bool "LaCie Network Space Max v2 NAS (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the LaCie + Network Space Max v2 NAS, using Flattened Device Tree. + +config MACH_NETSPACE_MINI_V2_DT + bool "LaCie Network Space Mini v2 NAS (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the LaCie + Network Space Mini v2 NAS using Flattened Device Tree. + + This board is embedded in a product named CloudBox, which + provides automatic backup on a 100GB cloud storage. This + should not confused with a more recent LaCie NAS also named + CloudBox. For this last, the disk capacity is 1TB or above. + +config MACH_NETSPACE_V2_DT + bool "LaCie Network Space v2 NAS (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the LaCie + Network Space v2 NAS, using Flattened Device Tree. + config MACH_NSA310_DT bool "ZyXEL NSA-310 (Flattened Device Tree)" select ARCH_KIRKWOOD_DT @@ -295,6 +280,43 @@ config MACH_NSA310_DT Say 'Y' here if you want your kernel to support the ZyXEL NSA-310 board (Flattened Device Tree). +config MACH_OPENBLOCKS_A6_DT + bool "Plat'Home OpenBlocks A6 (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the + Plat'Home OpenBlocks A6 (Flattened Device Tree). + +config MACH_READYNAS_DT + bool "NETGEAR ReadyNAS Duo v2 (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + select ARM_APPENDED_DTB + select ARM_ATAG_DTB_COMPAT + help + Say 'Y' here if you want your kernel to support the + NETGEAR ReadyNAS Duo v2 using Fattened Device Tree. + +config MACH_TOPKICK_DT + bool "USI Topkick (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the + USI Topkick, using Flattened Device Tree + +config MACH_TS219_DT + bool "Device Tree for QNAP TS-11X, TS-21X NAS" + select ARCH_KIRKWOOD_DT + select ARM_APPENDED_DTB + select ARM_ATAG_DTB_COMPAT + help + Say 'Y' here if you want your kernel to support the QNAP + TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and + TS-219P+ Turbo NAS devices using Fattened Device Tree. + There are two different Device Tree descriptions, depending + on if the device is based on an if the board uses the MV6281 + or MV6282. If you have the wrong one, the buttons will not + work. + endmenu endif diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index 4cc4bee4d0cf..cdbca328a412 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -1,42 +1,44 @@ obj-y += common.o addr-map.o irq.o pcie.o mpp.o +obj-$(CONFIG_MACH_D2NET_V2) += d2net_v2-setup.o lacie_v2-common.o obj-$(CONFIG_MACH_DB88F6281_BP) += db88f6281-bp-setup.o -obj-$(CONFIG_MACH_RD88F6192_NAS) += rd88f6192-nas-setup.o -obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o -obj-$(CONFIG_MACH_MV88F6281GTW_GE) += mv88f6281gtw_ge-setup.o -obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o +obj-$(CONFIG_MACH_DOCKSTAR) += dockstar-setup.o obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG) += sheevaplug-setup.o obj-$(CONFIG_MACH_GURUPLUG) += guruplug-setup.o -obj-$(CONFIG_MACH_DOCKSTAR) += dockstar-setup.o -obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o -obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o -obj-$(CONFIG_MACH_OPENRD) += openrd-setup.o -obj-$(CONFIG_MACH_NETSPACE_V2) += netspace_v2-setup.o lacie_v2-common.o obj-$(CONFIG_MACH_INETSPACE_V2) += netspace_v2-setup.o lacie_v2-common.o -obj-$(CONFIG_MACH_NETSPACE_MAX_V2) += netspace_v2-setup.o lacie_v2-common.o -obj-$(CONFIG_MACH_D2NET_V2) += d2net_v2-setup.o lacie_v2-common.o +obj-$(CONFIG_MACH_MV88F6281GTW_GE) += mv88f6281gtw_ge-setup.o obj-$(CONFIG_MACH_NET2BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o obj-$(CONFIG_MACH_NET5BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o +obj-$(CONFIG_MACH_NETSPACE_MAX_V2) += netspace_v2-setup.o lacie_v2-common.o +obj-$(CONFIG_MACH_NETSPACE_V2) += netspace_v2-setup.o lacie_v2-common.o +obj-$(CONFIG_MACH_OPENRD) += openrd-setup.o +obj-$(CONFIG_MACH_RD88F6192_NAS) += rd88f6192-nas-setup.o +obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o +obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o obj-$(CONFIG_MACH_T5325) += t5325-setup.o +obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o +obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o obj-$(CONFIG_ARCH_KIRKWOOD_DT) += board-dt.o -obj-$(CONFIG_MACH_DREAMPLUG_DT) += board-dreamplug.o -obj-$(CONFIG_MACH_GURUPLUG_DT) += board-guruplug.o -obj-$(CONFIG_MACH_ICONNECT_DT) += board-iconnect.o +obj-$(CONFIG_MACH_CLOUDBOX_DT) += board-ns2.o obj-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += board-dnskw.o -obj-$(CONFIG_MACH_IB62X0_DT) += board-ib62x0.o -obj-$(CONFIG_MACH_TS219_DT) += board-ts219.o tsx1x-common.o obj-$(CONFIG_MACH_DOCKSTAR_DT) += board-dockstar.o +obj-$(CONFIG_MACH_DREAMPLUG_DT) += board-dreamplug.o obj-$(CONFIG_MACH_GOFLEXNET_DT) += board-goflexnet.o -obj-$(CONFIG_MACH_LSXL_DT) += board-lsxl.o +obj-$(CONFIG_MACH_GURUPLUG_DT) += board-guruplug.o +obj-$(CONFIG_MACH_IB62X0_DT) += board-ib62x0.o +obj-$(CONFIG_MACH_ICONNECT_DT) += board-iconnect.o +obj-$(CONFIG_MACH_INETSPACE_V2_DT) += board-ns2.o obj-$(CONFIG_MACH_IOMEGA_IX2_200_DT) += board-iomega_ix2_200.o obj-$(CONFIG_MACH_KM_KIRKWOOD_DT) += board-km_kirkwood.o -obj-$(CONFIG_MACH_INETSPACE_V2_DT) += board-ns2.o +obj-$(CONFIG_MACH_LSXL_DT) += board-lsxl.o obj-$(CONFIG_MACH_MPLCEC4_DT) += board-mplcec4.o -obj-$(CONFIG_MACH_NETSPACE_V2_DT) += board-ns2.o -obj-$(CONFIG_MACH_NETSPACE_MAX_V2_DT) += board-ns2.o obj-$(CONFIG_MACH_NETSPACE_LITE_V2_DT) += board-ns2.o +obj-$(CONFIG_MACH_NETSPACE_MAX_V2_DT) += board-ns2.o obj-$(CONFIG_MACH_NETSPACE_MINI_V2_DT) += board-ns2.o +obj-$(CONFIG_MACH_NETSPACE_V2_DT) += board-ns2.o obj-$(CONFIG_MACH_NSA310_DT) += board-nsa310.o obj-$(CONFIG_MACH_OPENBLOCKS_A6_DT) += board-openblocks_a6.o +obj-$(CONFIG_MACH_READYNAS_DT) += board-readynas.o obj-$(CONFIG_MACH_TOPKICK_DT) += board-usi_topkick.o +obj-$(CONFIG_MACH_TS219_DT) += board-ts219.o tsx1x-common.o diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index d367aa6b47bb..7904758e771f 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -139,16 +139,20 @@ static void __init kirkwood_dt_init(void) if (of_machine_is_compatible("keymile,km_kirkwood")) km_kirkwood_init(); - if (of_machine_is_compatible("lacie,inetspace_v2") || - of_machine_is_compatible("lacie,netspace_v2") || - of_machine_is_compatible("lacie,netspace_max_v2") || + if (of_machine_is_compatible("lacie,cloudbox") || + of_machine_is_compatible("lacie,inetspace_v2") || of_machine_is_compatible("lacie,netspace_lite_v2") || - of_machine_is_compatible("lacie,netspace_mini_v2")) + of_machine_is_compatible("lacie,netspace_max_v2") || + of_machine_is_compatible("lacie,netspace_mini_v2") || + of_machine_is_compatible("lacie,netspace_v2")) ns2_init(); if (of_machine_is_compatible("mpl,cec4")) mplcec4_init(); + if (of_machine_is_compatible("netgear,readynas-duo-v2")) + netgear_readynas_init(); + if (of_machine_is_compatible("plathome,openblocks-a6")) openblocks_a6_init(); @@ -171,12 +175,14 @@ static const char * const kirkwood_dt_board_compat[] = { "buffalo,lsxl", "iom,ix2-200", "keymile,km_kirkwood", + "lacie,cloudbox", "lacie,inetspace_v2", - "lacie,netspace_max_v2", - "lacie,netspace_v2", "lacie,netspace_lite_v2", + "lacie,netspace_max_v2", "lacie,netspace_mini_v2", + "lacie,netspace_v2", "mpl,cec4", + "netgear,readynas-duo-v2", "plathome,openblocks-a6", "usi,topkick", "zyxel,nsa310", diff --git a/arch/arm/mach-kirkwood/board-ns2.c b/arch/arm/mach-kirkwood/board-ns2.c index f2ea3b7ad726..f8f660525ace 100644 --- a/arch/arm/mach-kirkwood/board-ns2.c +++ b/arch/arm/mach-kirkwood/board-ns2.c @@ -27,7 +27,8 @@ void __init ns2_init(void) /* * Basic setup. Needs to be called early. */ - if (of_machine_is_compatible("lacie,netspace_lite_v2") || + if (of_machine_is_compatible("lacie,cloudbox") || + of_machine_is_compatible("lacie,netspace_lite_v2") || of_machine_is_compatible("lacie,netspace_mini_v2")) ns2_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0); kirkwood_ge00_init(&ns2_ge00_data); diff --git a/arch/arm/mach-kirkwood/board-readynas.c b/arch/arm/mach-kirkwood/board-readynas.c new file mode 100644 index 000000000000..fb42c20e273f --- /dev/null +++ b/arch/arm/mach-kirkwood/board-readynas.c @@ -0,0 +1,28 @@ +/* + * NETGEAR ReadyNAS Duo v2 Board setup for drivers not already + * converted to DT. + * + * Copyright (C) 2013, Arnaud EBALARD + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include "common.h" + +static struct mv643xx_eth_platform_data netgear_readynas_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +void __init netgear_readynas_init(void) +{ + kirkwood_ge00_init(&netgear_readynas_ge00_data); + kirkwood_pcie_init(KW_PCIE0); +} diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h index 5ed70565c843..3147be2f34da 100644 --- a/arch/arm/mach-kirkwood/common.h +++ b/arch/arm/mach-kirkwood/common.h @@ -141,12 +141,24 @@ void openblocks_a6_init(void); static inline void openblocks_a6_init(void) {}; #endif +#ifdef CONFIG_MACH_READYNAS_DT +void netgear_readynas_init(void); +#else +static inline void netgear_readynas_init(void) {}; +#endif + #ifdef CONFIG_MACH_TOPKICK_DT void usi_topkick_init(void); #else static inline void usi_topkick_init(void) {}; #endif +#ifdef CONFIG_MACH_CLOUDBOX_DT +void cloudbox_init(void); +#else +static inline void cloudbox_init(void) {}; +#endif + /* early init functions not converted to fdt yet */ char *kirkwood_id(void); void kirkwood_l2_init(void); diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c index 76901f4ce611..5b660ec09ef5 100644 --- a/arch/arm/mach-mmp/aspenite.c +++ b/arch/arm/mach-mmp/aspenite.c @@ -9,6 +9,7 @@ * publishhed by the Free Software Foundation. */ #include +#include #include #include #include @@ -110,6 +111,10 @@ static unsigned long common_pin_config[] __initdata = { GPIO121_KP_MKIN4, }; +static struct pxa_gpio_platform_data pxa168_gpio_pdata = { + .irq_base = MMP_GPIO_TO_IRQ(0), +}; + static struct smc91x_platdata smc91x_info = { .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, }; @@ -242,6 +247,8 @@ static void __init common_init(void) pxa168_add_nand(&aspenite_nand_info); pxa168_add_fb(&aspenite_lcd_info); pxa168_add_keypad(&aspenite_keypad_info); + platform_device_add_data(&pxa168_device_gpio, &pxa168_gpio_pdata, + sizeof(struct pxa_gpio_platform_data)); platform_device_register(&pxa168_device_gpio); /* off-chip devices */ diff --git a/arch/arm/mach-mmp/avengers_lite.c b/arch/arm/mach-mmp/avengers_lite.c index 1f94957b56ae..a451a0f4d512 100644 --- a/arch/arm/mach-mmp/avengers_lite.c +++ b/arch/arm/mach-mmp/avengers_lite.c @@ -12,6 +12,7 @@ #include #include +#include #include #include @@ -32,12 +33,18 @@ static unsigned long avengers_lite_pin_config_V16F[] __initdata = { GPIO89_UART2_RXD, }; +static struct pxa_gpio_platform_data pxa168_gpio_pdata = { + .irq_base = MMP_GPIO_TO_IRQ(0), +}; + static void __init avengers_lite_init(void) { mfp_config(ARRAY_AND_SIZE(avengers_lite_pin_config_V16F)); /* on-chip devices */ pxa168_add_uart(2); + platform_device_add_data(&pxa168_device_gpio, &pxa168_gpio_pdata, + sizeof(struct pxa_gpio_platform_data)); platform_device_register(&pxa168_device_gpio); } diff --git a/arch/arm/mach-mmp/brownstone.c b/arch/arm/mach-mmp/brownstone.c index 2358011c7d8e..ac25544b8cdb 100644 --- a/arch/arm/mach-mmp/brownstone.c +++ b/arch/arm/mach-mmp/brownstone.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include #include @@ -104,6 +105,10 @@ static unsigned long brownstone_pin_config[] __initdata = { GPIO89_GPIO, }; +static struct pxa_gpio_platform_data mmp2_gpio_pdata = { + .irq_base = MMP_GPIO_TO_IRQ(0), +}; + static struct regulator_consumer_supply max8649_supply[] = { REGULATOR_SUPPLY("vcc_core", NULL), }; @@ -202,6 +207,8 @@ static void __init brownstone_init(void) /* on-chip devices */ mmp2_add_uart(1); mmp2_add_uart(3); + platform_device_add_data(&mmp2_device_gpio, &mmp2_gpio_pdata, + sizeof(struct pxa_gpio_platform_data)); platform_device_register(&mmp2_device_gpio); mmp2_add_twsi(1, NULL, ARRAY_AND_SIZE(brownstone_twsi1_info)); mmp2_add_sdhost(0, &mmp2_sdh_platdata_mmc0); /* SD/MMC */ diff --git a/arch/arm/mach-mmp/clock-mmp2.c b/arch/arm/mach-mmp/clock-mmp2.c index 21d22002cd19..53d77cbd6000 100644 --- a/arch/arm/mach-mmp/clock-mmp2.c +++ b/arch/arm/mach-mmp/clock-mmp2.c @@ -98,7 +98,7 @@ static struct clk_lookup mmp2_clkregs[] = { INIT_CLKREG(&clk_twsi5, "pxa2xx-i2c.4", NULL), INIT_CLKREG(&clk_twsi6, "pxa2xx-i2c.5", NULL), INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL), - INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL), + INIT_CLKREG(&clk_gpio, "mmp2-gpio", NULL), INIT_CLKREG(&clk_sdh0, "sdhci-pxav3.0", "PXA-SDHCLK"), INIT_CLKREG(&clk_sdh1, "sdhci-pxav3.1", "PXA-SDHCLK"), INIT_CLKREG(&clk_sdh2, "sdhci-pxav3.2", "PXA-SDHCLK"), diff --git a/arch/arm/mach-mmp/clock-pxa168.c b/arch/arm/mach-mmp/clock-pxa168.c index 5e6c18ccebd4..c572f219ae26 100644 --- a/arch/arm/mach-mmp/clock-pxa168.c +++ b/arch/arm/mach-mmp/clock-pxa168.c @@ -78,7 +78,7 @@ static struct clk_lookup pxa168_clkregs[] = { INIT_CLKREG(&clk_ssp5, "pxa168-ssp.4", NULL), INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL), INIT_CLKREG(&clk_lcd, "pxa168-fb", NULL), - INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL), + INIT_CLKREG(&clk_gpio, "mmp-gpio", NULL), INIT_CLKREG(&clk_keypad, "pxa27x-keypad", NULL), INIT_CLKREG(&clk_eth, "pxa168-eth", "MFUCLK"), INIT_CLKREG(&clk_usb, NULL, "PXA168-USBCLK"), diff --git a/arch/arm/mach-mmp/clock-pxa910.c b/arch/arm/mach-mmp/clock-pxa910.c index 933ea71d0b56..379e1df61c70 100644 --- a/arch/arm/mach-mmp/clock-pxa910.c +++ b/arch/arm/mach-mmp/clock-pxa910.c @@ -56,7 +56,7 @@ static struct clk_lookup pxa910_clkregs[] = { INIT_CLKREG(&clk_pwm3, "pxa910-pwm.2", NULL), INIT_CLKREG(&clk_pwm4, "pxa910-pwm.3", NULL), INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL), - INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL), + INIT_CLKREG(&clk_gpio, "mmp-gpio", NULL), INIT_CLKREG(&clk_u2o, NULL, "U2OCLK"), INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL), }; diff --git a/arch/arm/mach-mmp/flint.c b/arch/arm/mach-mmp/flint.c index 754c352dd02b..6291c33d83e2 100644 --- a/arch/arm/mach-mmp/flint.c +++ b/arch/arm/mach-mmp/flint.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include @@ -77,6 +78,10 @@ static unsigned long flint_pin_config[] __initdata = { GPIO160_ND_RDY1, }; +static struct pxa_gpio_platform_data mmp2_gpio_pdata = { + .irq_base = MMP_GPIO_TO_IRQ(0), +}; + static struct smc91x_platdata flint_smc91x_info = { .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, }; @@ -111,6 +116,8 @@ static void __init flint_init(void) /* on-chip devices */ mmp2_add_uart(1); mmp2_add_uart(2); + platform_device_add_data(&mmp2_device_gpio, &mmp2_gpio_pdata, + sizeof(struct pxa_gpio_platform_data)); platform_device_register(&mmp2_device_gpio); /* off-chip devices */ diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c index f62b68d926f4..d81b2475e67e 100644 --- a/arch/arm/mach-mmp/gplugd.c +++ b/arch/arm/mach-mmp/gplugd.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include @@ -128,6 +129,10 @@ static unsigned long gplugd_pin_config[] __initdata = { GPIO116_I2S_TXD }; +static struct pxa_gpio_platform_data pxa168_gpio_pdata = { + .irq_base = MMP_GPIO_TO_IRQ(0), +}; + static struct i2c_board_info gplugd_i2c_board_info[] = { { .type = "isl1208", @@ -186,6 +191,8 @@ static void __init gplugd_init(void) pxa168_add_uart(3); pxa168_add_ssp(1); pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(gplugd_i2c_board_info)); + platform_device_add_data(&pxa168_device_gpio, &pxa168_gpio_pdata, + sizeof(struct pxa_gpio_platform_data)); platform_device_register(&pxa168_device_gpio); pxa168_add_eth(&gplugd_eth_platform_data); diff --git a/arch/arm/mach-mmp/include/mach/debug-macro.S b/arch/arm/mach-mmp/include/mach/debug-macro.S deleted file mode 100644 index 5c3cc29688ab..000000000000 --- a/arch/arm/mach-mmp/include/mach/debug-macro.S +++ /dev/null @@ -1,30 +0,0 @@ -/* arch/arm/mach-mmp/include/mach/debug-macro.S - * - * Debugging macro include header - * - * Copied from arch/arm/mach-pxa/include/mach/debug.S - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#if defined(CONFIG_DEBUG_MMP_UART2) -#define MMP_UART_OFFSET 0x00017000 -#elif defined(CONFIG_DEBUG_MMP_UART3) -#define MMP_UART_OFFSET 0x00018000 -#else -#error "Select uart for DEBUG_LL" -#endif - -#include - - .macro addruart, rp, rv, tmp - ldr \rp, =APB_PHYS_BASE @ physical - ldr \rv, =APB_VIRT_BASE @ virtual - orr \rp, \rp, #MMP_UART_OFFSET - orr \rv, \rv, #MMP_UART_OFFSET - .endm - -#define UART_SHIFT 2 -#include diff --git a/arch/arm/mach-mmp/jasper.c b/arch/arm/mach-mmp/jasper.c index 66634fd0ecb0..0e9e5c05b37c 100644 --- a/arch/arm/mach-mmp/jasper.c +++ b/arch/arm/mach-mmp/jasper.c @@ -12,6 +12,7 @@ #include #include +#include #include #include #include @@ -99,6 +100,10 @@ static unsigned long jasper_pin_config[] __initdata = { GPIO151_MMC3_CLK, }; +static struct pxa_gpio_platform_data mmp2_gpio_pdata = { + .irq_base = MMP_GPIO_TO_IRQ(0), +}; + static struct regulator_consumer_supply max8649_supply[] = { REGULATOR_SUPPLY("vcc_core", NULL), }; @@ -165,6 +170,9 @@ static void __init jasper_init(void) mmp2_add_uart(1); mmp2_add_uart(3); mmp2_add_twsi(1, NULL, ARRAY_AND_SIZE(jasper_twsi1_info)); + platform_device_add_data(&mmp2_device_gpio, &mmp2_gpio_pdata, + sizeof(struct pxa_gpio_platform_data)); + platform_device_register(&mmp2_device_gpio); mmp2_add_sdhost(0, &mmp2_sdh_platdata_mmc0); /* SD/MMC */ regulator_has_full_constraints(); diff --git a/arch/arm/mach-mmp/mmp-dt.c b/arch/arm/mach-mmp/mmp-dt.c index d063efa0a4f1..b37915dc4470 100644 --- a/arch/arm/mach-mmp/mmp-dt.c +++ b/arch/arm/mach-mmp/mmp-dt.c @@ -28,7 +28,7 @@ static const struct of_dev_auxdata pxa168_auxdata_lookup[] __initconst = { OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4026000, "pxa2xx-uart.2", NULL), OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4011000, "pxa2xx-i2c.0", NULL), OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4025000, "pxa2xx-i2c.1", NULL), - OF_DEV_AUXDATA("mrvl,mmp-gpio", 0xd4019000, "pxa-gpio", NULL), + OF_DEV_AUXDATA("marvell,mmp-gpio", 0xd4019000, "mmp-gpio", NULL), OF_DEV_AUXDATA("mrvl,mmp-rtc", 0xd4010000, "sa1100-rtc", NULL), {} }; @@ -39,7 +39,7 @@ static const struct of_dev_auxdata pxa910_auxdata_lookup[] __initconst = { OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4036000, "pxa2xx-uart.2", NULL), OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4011000, "pxa2xx-i2c.0", NULL), OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4037000, "pxa2xx-i2c.1", NULL), - OF_DEV_AUXDATA("mrvl,mmp-gpio", 0xd4019000, "pxa-gpio", NULL), + OF_DEV_AUXDATA("marvell,mmp-gpio", 0xd4019000, "mmp-gpio", NULL), OF_DEV_AUXDATA("mrvl,mmp-rtc", 0xd4010000, "sa1100-rtc", NULL), {} }; diff --git a/arch/arm/mach-mmp/mmp2-dt.c b/arch/arm/mach-mmp/mmp2-dt.c index fad431aa6e09..4ac256720f7d 100644 --- a/arch/arm/mach-mmp/mmp2-dt.c +++ b/arch/arm/mach-mmp/mmp2-dt.c @@ -31,7 +31,7 @@ static const struct of_dev_auxdata mmp2_auxdata_lookup[] __initconst = { OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4016000, "pxa2xx-uart.3", NULL), OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4011000, "pxa2xx-i2c.0", NULL), OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4025000, "pxa2xx-i2c.1", NULL), - OF_DEV_AUXDATA("mrvl,mmp-gpio", 0xd4019000, "pxa-gpio", NULL), + OF_DEV_AUXDATA("marvell,mmp-gpio", 0xd4019000, "mmp2-gpio", NULL), OF_DEV_AUXDATA("mrvl,mmp-rtc", 0xd4010000, "sa1100-rtc", NULL), {} }; diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c index d94d114eef7b..c7592f168bbd 100644 --- a/arch/arm/mach-mmp/mmp2.c +++ b/arch/arm/mach-mmp/mmp2.c @@ -164,7 +164,7 @@ struct resource mmp2_resource_gpio[] = { }; struct platform_device mmp2_device_gpio = { - .name = "pxa-gpio", + .name = "mmp2-gpio", .id = -1, .num_resources = ARRAY_SIZE(mmp2_resource_gpio), .resource = mmp2_resource_gpio, diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c index 9bc7b86a86a7..a30dcf3b7d9e 100644 --- a/arch/arm/mach-mmp/pxa168.c +++ b/arch/arm/mach-mmp/pxa168.c @@ -125,7 +125,7 @@ struct resource pxa168_resource_gpio[] = { }; struct platform_device pxa168_device_gpio = { - .name = "pxa-gpio", + .name = "mmp-gpio", .id = -1, .num_resources = ARRAY_SIZE(pxa168_resource_gpio), .resource = pxa168_resource_gpio, diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c index 36cb321a3d70..ce6393acad86 100644 --- a/arch/arm/mach-mmp/pxa910.c +++ b/arch/arm/mach-mmp/pxa910.c @@ -152,7 +152,7 @@ struct resource pxa910_resource_gpio[] = { }; struct platform_device pxa910_device_gpio = { - .name = "pxa-gpio", + .name = "mmp-gpio", .id = -1, .num_resources = ARRAY_SIZE(pxa910_resource_gpio), .resource = pxa910_resource_gpio, diff --git a/arch/arm/mach-mmp/tavorevb.c b/arch/arm/mach-mmp/tavorevb.c index 4c127d23955d..cdfc9bfee1a4 100644 --- a/arch/arm/mach-mmp/tavorevb.c +++ b/arch/arm/mach-mmp/tavorevb.c @@ -8,6 +8,7 @@ * publishhed by the Free Software Foundation. */ #include +#include #include #include #include @@ -60,6 +61,10 @@ static unsigned long tavorevb_pin_config[] __initdata = { DF_RDY0_DF_RDY0, }; +static struct pxa_gpio_platform_data pxa910_gpio_pdata = { + .irq_base = MMP_GPIO_TO_IRQ(0), +}; + static struct smc91x_platdata tavorevb_smc91x_info = { .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, }; @@ -93,6 +98,8 @@ static void __init tavorevb_init(void) /* on-chip devices */ pxa910_add_uart(1); + platform_device_add_data(&pxa910_device_gpio, &pxa910_gpio_pdata, + sizeof(struct pxa_gpio_platform_data)); platform_device_register(&pxa910_device_gpio); /* off-chip devices */ diff --git a/arch/arm/mach-mmp/teton_bga.c b/arch/arm/mach-mmp/teton_bga.c index 8609967975ed..e4d95b4c6bb2 100644 --- a/arch/arm/mach-mmp/teton_bga.c +++ b/arch/arm/mach-mmp/teton_bga.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include #include @@ -49,6 +50,10 @@ static unsigned long teton_bga_pin_config[] __initdata = { GPIO78_GPIO, }; +static struct pxa_gpio_platform_data pxa168_gpio_pdata = { + .irq_base = MMP_GPIO_TO_IRQ(0), +}; + static unsigned int teton_bga_matrix_key_map[] = { KEY(0, 6, KEY_ESC), KEY(0, 7, KEY_ENTER), @@ -79,6 +84,8 @@ static void __init teton_bga_init(void) pxa168_add_uart(1); pxa168_add_keypad(&teton_bga_keypad_info); pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(teton_bga_i2c_info)); + platform_device_add_data(&pxa168_device_gpio, &pxa168_gpio_pdata, + sizeof(struct pxa_gpio_platform_data)); platform_device_register(&pxa168_device_gpio); } diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c index 6528a5fa6a26..8483906d4308 100644 --- a/arch/arm/mach-mmp/ttc_dkb.c +++ b/arch/arm/mach-mmp/ttc_dkb.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include @@ -75,6 +76,10 @@ static unsigned long ttc_dkb_pin_config[] __initdata = { DF_RDY0_DF_RDY0, }; +static struct pxa_gpio_platform_data pxa910_gpio_pdata = { + .irq_base = MMP_GPIO_TO_IRQ(0), +}; + static struct mtd_partition ttc_dkb_onenand_partitions[] = { { .name = "bootloader", @@ -278,6 +283,8 @@ static void __init ttc_dkb_init(void) /* off-chip devices */ pxa910_add_twsi(0, NULL, ARRAY_AND_SIZE(ttc_dkb_i2c_info)); + platform_device_add_data(&pxa910_device_gpio, &pxa910_gpio_pdata, + sizeof(struct pxa_gpio_platform_data)); platform_add_devices(ARRAY_AND_SIZE(ttc_dkb_devices)); #ifdef CONFIG_USB_MV_UDC diff --git a/arch/arm/mach-omap1/include/mach/usb.h b/arch/arm/mach-omap1/include/mach/usb.h index 753cd5ce6949..45e5ac707cbb 100644 --- a/arch/arm/mach-omap1/include/mach/usb.h +++ b/arch/arm/mach-omap1/include/mach/usb.h @@ -2,7 +2,7 @@ * FIXME correct answer depends on hmc_mode, * as does (on omap1) any nonzero value for config->otg port number */ -#ifdef CONFIG_USB_GADGET_OMAP +#if IS_ENABLED(CONFIG_USB_OMAP) #define is_usb0_device(config) 1 #else #define is_usb0_device(config) 0 diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c index 1a1db5971cd9..4118db50d5e8 100644 --- a/arch/arm/mach-omap1/usb.c +++ b/arch/arm/mach-omap1/usb.c @@ -123,7 +123,7 @@ omap_otg_init(struct omap_usb_config *config) syscon = omap_readl(OTG_SYSCON_1); syscon |= HST_IDLE_EN|DEV_IDLE_EN|OTG_IDLE_EN; -#ifdef CONFIG_USB_GADGET_OMAP +#if IS_ENABLED(CONFIG_USB_OMAP) if (config->otg || config->register_dev) { struct platform_device *udc_device = config->udc_device; int status; @@ -169,7 +169,7 @@ omap_otg_init(struct omap_usb_config *config) void omap_otg_init(struct omap_usb_config *config) {} #endif -#ifdef CONFIG_USB_GADGET_OMAP +#if IS_ENABLED(CONFIG_USB_OMAP) static struct resource udc_resources[] = { /* order is significant! */ @@ -600,7 +600,7 @@ static void __init omap_1510_usb_init(struct omap_usb_config *config) while (!(omap_readw(ULPD_DPLL_CTRL) & DPLL_LOCK)) cpu_relax(); -#ifdef CONFIG_USB_GADGET_OMAP +#if IS_ENABLED(CONFIG_USB_OMAP) if (config->register_dev) { int status; diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index b068b7fe99ef..62bb352c2d37 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -229,7 +229,6 @@ obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o -obj-$(CONFIG_MACH_ENCORE) += board-omap3encore.o obj-$(CONFIG_MACH_OVERO) += board-overo.o obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o @@ -255,8 +254,6 @@ obj-$(CONFIG_MACH_TOUCHBOOK) += board-omap3touchbook.o obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o obj-$(CONFIG_MACH_OMAP4_PANDA) += board-omap4panda.o -obj-$(CONFIG_MACH_PCM049) += board-omap4pcm049.o - obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o obj-$(CONFIG_MACH_CRANEBOARD) += board-am3517crane.o diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 35f3ad0cb7c7..00d72902ef4f 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -291,6 +291,10 @@ static struct platform_device sdp4430_leds_pwm = { }, }; +/* Dummy regulator for pwm-backlight driver */ +static struct regulator_consumer_supply backlight_supply = + REGULATOR_SUPPLY("enable", "pwm-backlight"); + static struct platform_pwm_backlight_data sdp4430_backlight_data = { .max_brightness = 127, .dft_brightness = 127, @@ -718,6 +722,8 @@ static void __init omap_4430sdp_init(void) omap4_i2c_init(); omap_sfh7741prox_init(); + regulator_register_always_on(0, "backlight-enable", + &backlight_supply, 1, 0); platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices)); omap_serial_init(); omap_sdrc_init(NULL, NULL); diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 3a077df6b8df..1a884670a6c4 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -547,12 +547,16 @@ static struct regulator_consumer_supply rx51_vio_supplies[] = { REGULATOR_SUPPLY("DVDD", "2-0019"), /* Si4713 IO supply */ REGULATOR_SUPPLY("vio", "2-0063"), + /* lis3lv02d */ + REGULATOR_SUPPLY("Vdd_IO", "3-001d"), }; static struct regulator_consumer_supply rx51_vaux1_consumers[] = { REGULATOR_SUPPLY("vdds_sdi", "omapdss"), /* Si4713 supply */ REGULATOR_SUPPLY("vdd", "2-0063"), + /* lis3lv02d */ + REGULATOR_SUPPLY("Vdd", "3-001d"), }; static struct regulator_init_data rx51_vaux1 = { diff --git a/arch/arm/mach-omap2/board-zoom-display.c b/arch/arm/mach-omap2/board-zoom-display.c index 8cef477d6b00..9a7174faac51 100644 --- a/arch/arm/mach-omap2/board-zoom-display.c +++ b/arch/arm/mach-omap2/board-zoom-display.c @@ -12,7 +12,6 @@ #include #include #include -#include #include #include #include