diff --git a/Documentation/devicetree/bindings/video/hdmi-connector.txt b/Documentation/devicetree/bindings/video/hdmi-connector.txt
index ccccc19e2573..acd5668b1ce1 100644
--- a/Documentation/devicetree/bindings/video/hdmi-connector.txt
+++ b/Documentation/devicetree/bindings/video/hdmi-connector.txt
@@ -7,6 +7,7 @@ Required properties:
 
 Optional properties:
 - label: a symbolic name for the connector
+- hpd-gpios: HPD GPIO number
 
 Required nodes:
 - Video port for HDMI input
diff --git a/Documentation/devicetree/bindings/video/lgphilips,lb035q02.txt b/Documentation/devicetree/bindings/video/lgphilips,lb035q02.txt
new file mode 100644
index 000000000000..1a1e653e5407
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/lgphilips,lb035q02.txt
@@ -0,0 +1,33 @@
+LG.Philips LB035Q02 Panel
+=========================
+
+Required properties:
+- compatible: "lgphilips,lb035q02"
+- enable-gpios: panel enable gpio
+
+Optional properties:
+- label: a symbolic name for the panel
+
+Required nodes:
+- Video port for DPI input
+
+Example
+-------
+
+lcd-panel: panel@0 {
+	compatible = "lgphilips,lb035q02";
+	reg = <0>;
+	spi-max-frequency = <100000>;
+	spi-cpol;
+	spi-cpha;
+
+	label = "lcd";
+
+	enable-gpios = <&gpio7 7 0>;
+
+	port {
+		lcd_in: endpoint {
+			remote-endpoint = <&dpi_out>;
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/video/panel-dpi.txt b/Documentation/devicetree/bindings/video/panel-dpi.txt
new file mode 100644
index 000000000000..a40180b05bab
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/panel-dpi.txt
@@ -0,0 +1,45 @@
+Generic MIPI DPI Panel
+======================
+
+Required properties:
+- compatible: "panel-dpi"
+
+Optional properties:
+- label: a symbolic name for the panel
+- enable-gpios: panel enable gpio
+
+Required nodes:
+- "panel-timing" containing video timings
+  (Documentation/devicetree/bindings/video/display-timing.txt)
+- Video port for DPI input
+
+Example
+-------
+
+lcd0: display@0 {
+        compatible = "samsung,lte430wq-f0c", "panel-dpi";
+        label = "lcd";
+
+        port {
+            lcd_in: endpoint {
+                    remote-endpoint = <&dpi_out>;
+            };
+        };
+
+        panel-timing {
+                clock-frequency = <9200000>;
+                hactive = <480>;
+                vactive = <272>;
+                hfront-porch = <8>;
+                hback-porch = <4>;
+                hsync-len = <41>;
+                vback-porch = <2>;
+                vfront-porch = <4>;
+                vsync-len = <10>;
+
+                hsync-active = <0>;
+                vsync-active = <0>;
+                de-active = <1>;
+                pixelclk-active = <1>;
+        };
+};
diff --git a/Documentation/devicetree/bindings/video/sharp,ls037v7dw01.txt b/Documentation/devicetree/bindings/video/sharp,ls037v7dw01.txt
new file mode 100644
index 000000000000..0cc8981e9d49
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/sharp,ls037v7dw01.txt
@@ -0,0 +1,43 @@
+SHARP LS037V7DW01 TFT-LCD panel
+===================================
+
+Required properties:
+- compatible: "sharp,ls037v7dw01"
+
+Optional properties:
+- label: a symbolic name for the panel
+- enable-gpios: a GPIO spec for the optional enable pin.
+  This pin is the INI pin as specified in the LS037V7DW01.pdf file.
+- reset-gpios: a GPIO spec for the optional reset pin.
+  This pin is the RESB pin as specified in the LS037V7DW01.pdf file.
+- mode-gpios: a GPIO
+  ordered MO, LR, and UD as specified in the LS037V7DW01.pdf file.
+
+Required nodes:
+- Video port for DPI input
+
+This panel can have zero to five GPIOs to configure to change configuration
+between QVGA and VGA mode and the scan direction. As these pins can be also
+configured with external pulls, all the GPIOs are considered optional with holes
+in the array.
+
+Example
+-------
+
+Example when connected to a omap2+ based device:
+
+lcd0: display {
+	compatible = "sharp,ls037v7dw01";
+	power-supply = <&lcd_3v3>;
+	enable-gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>;	/* gpio152, lcd INI */
+	reset-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;	/* gpio155, lcd RESB */
+	mode-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH	/* gpio154, lcd MO */
+		      &gpio1 2 GPIO_ACTIVE_HIGH		/* gpio2, lcd LR */
+		      &gpio1 3 GPIO_ACTIVE_HIGH>;	/* gpio3, lcd UD */
+
+	port {
+		lcd_in: endpoint {
+			remote-endpoint = <&dpi_out>;
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/video/ti,omap4-dss.txt b/Documentation/devicetree/bindings/video/ti,omap4-dss.txt
index f85d6fcfa705..b8c29fbd1fbb 100644
--- a/Documentation/devicetree/bindings/video/ti,omap4-dss.txt
+++ b/Documentation/devicetree/bindings/video/ti,omap4-dss.txt
@@ -109,3 +109,7 @@ Required properties:
 
 Optional nodes:
 - Video port for HDMI output
+
+HDMI Endpoint optional properties:
+- lanes: list of 8 pin numbers for the HDMI lanes: CLK+, CLK-, D0+, D0-,
+  D1+, D1-, D2+, D2-. (default: 0,1,2,3,4,5,6,7)
diff --git a/Documentation/devicetree/bindings/video/ti,omap5-dss.txt b/Documentation/devicetree/bindings/video/ti,omap5-dss.txt
new file mode 100644
index 000000000000..38ffc8fcd816
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/ti,omap5-dss.txt
@@ -0,0 +1,96 @@
+Texas Instruments OMAP5 Display Subsystem
+=========================================
+
+See Documentation/devicetree/bindings/video/ti,omap-dss.txt for generic
+description about OMAP Display Subsystem bindings.
+
+DSS Core
+--------
+
+Required properties:
+- compatible: "ti,omap5-dss"
+- reg: address and length of the register space
+- ti,hwmods: "dss_core"
+- clocks: handle to fclk
+- clock-names: "fck"
+
+Required nodes:
+- DISPC
+
+Optional nodes:
+- DSS Submodules: RFBI, DSI, HDMI
+- Video port for DPI output
+
+DPI Endpoint required properties:
+- data-lines: number of lines used
+
+
+DISPC
+-----
+
+Required properties:
+- compatible: "ti,omap5-dispc"
+- reg: address and length of the register space
+- ti,hwmods: "dss_dispc"
+- interrupts: the DISPC interrupt
+- clocks: handle to fclk
+- clock-names: "fck"
+
+
+RFBI
+----
+
+Required properties:
+- compatible: "ti,omap5-rfbi"
+- reg: address and length of the register space
+- ti,hwmods: "dss_rfbi"
+- clocks: handles to fclk and iclk
+- clock-names: "fck", "ick"
+
+Optional nodes:
+- Video port for RFBI output
+- RFBI controlled peripherals
+
+
+DSI
+---
+
+Required properties:
+- compatible: "ti,omap5-dsi"
+- reg: addresses and lengths of the register spaces for 'proto', 'phy' and 'pll'
+- reg-names: "proto", "phy", "pll"
+- interrupts: the DSI interrupt line
+- ti,hwmods: "dss_dsi1" or "dss_dsi2"
+- vdd-supply: power supply for DSI
+- clocks: handles to fclk and pll clock
+- clock-names: "fck", "sys_clk"
+
+Optional nodes:
+- Video port for DSI output
+- DSI controlled peripherals
+
+DSI Endpoint required properties:
+- lanes: list of pin numbers for the DSI lanes: CLK+, CLK-, DATA0+, DATA0-,
+  DATA1+, DATA1-, ...
+
+
+HDMI
+----
+
+Required properties:
+- compatible: "ti,omap5-hdmi"
+- reg: addresses and lengths of the register spaces for 'wp', 'pll', 'phy',
+       'core'
+- reg-names: "wp", "pll", "phy", "core"
+- interrupts: the HDMI interrupt line
+- ti,hwmods: "dss_hdmi"
+- vdda-supply: vdda power supply
+- clocks: handles to fclk and pll clock
+- clock-names: "fck", "sys_clk"
+
+Optional nodes:
+- Video port for HDMI output
+
+HDMI Endpoint optional properties:
+- lanes: list of 8 pin numbers for the HDMI lanes: CLK+, CLK-, D0+, D0-,
+  D1+, D1-, D2+, D2-. (default: 0,1,2,3,4,5,6,7)
diff --git a/Documentation/devicetree/bindings/video/toppoly,td028ttec1.txt b/Documentation/devicetree/bindings/video/toppoly,td028ttec1.txt
new file mode 100644
index 000000000000..7175dc3740ac
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/toppoly,td028ttec1.txt
@@ -0,0 +1,30 @@
+Toppoly TD028TTEC1 Panel
+========================
+
+Required properties:
+- compatible: "toppoly,td028ttec1"
+
+Optional properties:
+- label: a symbolic name for the panel
+
+Required nodes:
+- Video port for DPI input
+
+Example
+-------
+
+lcd-panel: td028ttec1@0 {
+	compatible = "toppoly,td028ttec1";
+	reg = <0>;
+	spi-max-frequency = <100000>;
+	spi-cpol;
+	spi-cpha;
+
+	label = "lcd";
+	port {
+		lcd_in: endpoint {
+			remote-endpoint = <&dpi_out>;
+		};
+	};
+};
+
diff --git a/Documentation/devicetree/bindings/video/tpo,td043mtea1.txt b/Documentation/devicetree/bindings/video/tpo,td043mtea1.txt
new file mode 100644
index 000000000000..ec6d62975162
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/tpo,td043mtea1.txt
@@ -0,0 +1,33 @@
+TPO TD043MTEA1 Panel
+====================
+
+Required properties:
+- compatible: "tpo,td043mtea1"
+- reset-gpios: panel reset gpio
+
+Optional properties:
+- label: a symbolic name for the panel
+
+Required nodes:
+- Video port for DPI input
+
+Example
+-------
+
+lcd-panel: panel@0 {
+	compatible = "tpo,td043mtea1";
+	reg = <0>;
+	spi-max-frequency = <100000>;
+	spi-cpol;
+	spi-cpha;
+
+	label = "lcd";
+
+	reset-gpios = <&gpio7 7 0>;
+
+	port {
+		lcd_in: endpoint {
+			remote-endpoint = <&dpi_out>;
+		};
+	};
+};
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index 16d33d831287..bf852d7ae951 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -279,6 +279,8 @@ static enum omapdss_version __init omap_display_get_version(void)
 		return OMAPDSS_VER_OMAP4;
 	else if (soc_is_omap54xx())
 		return OMAPDSS_VER_OMAP5;
+	else if (soc_is_am43xx())
+		return OMAPDSS_VER_AM43xx;
 	else
 		return OMAPDSS_VER_UNKNOWN;
 }
@@ -555,65 +557,9 @@ int omap_dss_reset(struct omap_hwmod *oh)
 	return r;
 }
 
-/* list of 'compatible' nodes to convert to omapdss specific */
-static const char * const dss_compat_conv_list[] __initconst = {
-	"composite-connector",
-	"dvi-connector",
-	"hdmi-connector",
-	"panel-dpi",
-	"panel-dsi-cm",
-	"sony,acx565akm",
-	"svideo-connector",
-	"ti,tfp410",
-	"ti,tpd12s015",
-};
-
-/* prepend compatible string with "omapdss," */
-static __init void omapdss_omapify_node(struct device_node *node,
-	const char *compat)
-{
-	char *new_compat;
-	struct property *prop;
-
-	new_compat = kasprintf(GFP_KERNEL, "omapdss,%s", compat);
-
-	prop = kzalloc(sizeof(*prop), GFP_KERNEL);
-
-	if (!prop) {
-		pr_err("omapdss_omapify_node: kzalloc failed\n");
-		return;
-	}
-
-	prop->name = "compatible";
-	prop->value = new_compat;
-	prop->length = strlen(new_compat) + 1;
-
-	of_update_property(node, prop);
-}
-
-/*
- * As omapdss panel drivers are omapdss specific, but we want to define the
- * DT-data in generic manner, we convert the compatible strings of the panel
- * nodes from "panel-foo" to "omapdss,panel-foo". This way we can have both
- * correct DT data and omapdss specific drivers.
- *
- * When we get generic panel drivers to the kernel, this will be removed.
- */
 void __init omapdss_early_init_of(void)
 {
-	int i;
 
-	for (i = 0; i < ARRAY_SIZE(dss_compat_conv_list); ++i) {
-		const char *compat = dss_compat_conv_list[i];
-		struct device_node *node = NULL;
-
-		while ((node = of_find_compatible_node(node, NULL, compat))) {
-			if (!of_device_is_available(node))
-				continue;
-
-			omapdss_omapify_node(node, compat);
-		}
-	}
 }
 
 struct device_node * __init omapdss_find_dss_of_node(void)
@@ -632,6 +578,10 @@ struct device_node * __init omapdss_find_dss_of_node(void)
 	if (node)
 		return node;
 
+	node = of_find_compatible_node(NULL, NULL, "ti,omap5-dss");
+	if (node)
+		return node;
+
 	return NULL;
 }
 
diff --git a/drivers/video/fbdev/omap2/Makefile b/drivers/video/fbdev/omap2/Makefile
index bf8127df8c71..f8745ec369cc 100644
--- a/drivers/video/fbdev/omap2/Makefile
+++ b/drivers/video/fbdev/omap2/Makefile
@@ -1,5 +1,5 @@
 obj-$(CONFIG_OMAP2_VRFB) += vrfb.o
 
-obj-$(CONFIG_OMAP2_DSS) += dss/
+obj-y += dss/
 obj-y += displays-new/
 obj-$(CONFIG_FB_OMAP2) += omapfb/
diff --git a/drivers/video/fbdev/omap2/displays-new/connector-hdmi.c b/drivers/video/fbdev/omap2/displays-new/connector-hdmi.c
index 29ed21b9dce5..4420ccb69aa9 100644
--- a/drivers/video/fbdev/omap2/displays-new/connector-hdmi.c
+++ b/drivers/video/fbdev/omap2/displays-new/connector-hdmi.c
@@ -13,6 +13,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/of.h>
+#include <linux/of_gpio.h>
 
 #include <drm/drm_edid.h>
 
@@ -43,6 +44,8 @@ struct panel_drv_data {
 	struct device *dev;
 
 	struct omap_video_timings timings;
+
+	int hpd_gpio;
 };
 
 #define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev)
@@ -161,7 +164,10 @@ static bool hdmic_detect(struct omap_dss_device *dssdev)
 	struct panel_drv_data *ddata = to_panel_data(dssdev);
 	struct omap_dss_device *in = ddata->in;
 
-	return in->ops.hdmi->detect(in);
+	if (gpio_is_valid(ddata->hpd_gpio))
+		return gpio_get_value_cansleep(ddata->hpd_gpio);
+	else
+		return in->ops.hdmi->detect(in);
 }
 
 static int hdmic_audio_enable(struct omap_dss_device *dssdev)
@@ -288,6 +294,8 @@ static int hdmic_probe_pdata(struct platform_device *pdev)
 
 	pdata = dev_get_platdata(&pdev->dev);
 
+	ddata->hpd_gpio = -ENODEV;
+
 	in = omap_dss_find_output(pdata->source);
 	if (in == NULL) {
 		dev_err(&pdev->dev, "Failed to find video source\n");
@@ -307,6 +315,14 @@ static int hdmic_probe_of(struct platform_device *pdev)
 	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
 	struct device_node *node = pdev->dev.of_node;
 	struct omap_dss_device *in;
+	int gpio;
+
+	/* HPD GPIO */
+	gpio = of_get_named_gpio(node, "hpd-gpios", 0);
+	if (gpio_is_valid(gpio))
+		ddata->hpd_gpio = gpio;
+	else
+		ddata->hpd_gpio = -ENODEV;
 
 	in = omapdss_of_find_source_for_first_ep(node);
 	if (IS_ERR(in)) {
@@ -344,6 +360,13 @@ static int hdmic_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
+	if (gpio_is_valid(ddata->hpd_gpio)) {
+		r = devm_gpio_request_one(&pdev->dev, ddata->hpd_gpio,
+				GPIOF_DIR_IN, "hdmi_hpd");
+		if (r)
+			goto err_reg;
+	}
+
 	ddata->timings = hdmic_default_timings;
 
 	dssdev = &ddata->dssdev;
diff --git a/drivers/video/fbdev/omap2/displays-new/panel-dpi.c b/drivers/video/fbdev/omap2/displays-new/panel-dpi.c
index 5f8f7e7c81ef..3636b61dc9b4 100644
--- a/drivers/video/fbdev/omap2/displays-new/panel-dpi.c
+++ b/drivers/video/fbdev/omap2/displays-new/panel-dpi.c
@@ -13,9 +13,12 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
 
 #include <video/omapdss.h>
 #include <video/omap-panel-data.h>
+#include <video/of_display_timing.h>
 
 struct panel_drv_data {
 	struct omap_dss_device dssdev;
@@ -25,8 +28,10 @@ struct panel_drv_data {
 
 	struct omap_video_timings videomode;
 
+	/* used for non-DT boot, to be removed */
 	int backlight_gpio;
-	int enable_gpio;
+
+	struct gpio_desc *enable_gpio;
 };
 
 #define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
@@ -70,15 +75,16 @@ static int panel_dpi_enable(struct omap_dss_device *dssdev)
 	if (omapdss_device_is_enabled(dssdev))
 		return 0;
 
-	in->ops.dpi->set_data_lines(in, ddata->data_lines);
+	if (ddata->data_lines)
+		in->ops.dpi->set_data_lines(in, ddata->data_lines);
 	in->ops.dpi->set_timings(in, &ddata->videomode);
 
 	r = in->ops.dpi->enable(in);
 	if (r)
 		return r;
 
-	if (gpio_is_valid(ddata->enable_gpio))
-		gpio_set_value_cansleep(ddata->enable_gpio, 1);
+	if (ddata->enable_gpio)
+		gpiod_set_value_cansleep(ddata->enable_gpio, 1);
 
 	if (gpio_is_valid(ddata->backlight_gpio))
 		gpio_set_value_cansleep(ddata->backlight_gpio, 1);
@@ -96,8 +102,8 @@ static void panel_dpi_disable(struct omap_dss_device *dssdev)
 	if (!omapdss_device_is_enabled(dssdev))
 		return;
 
-	if (gpio_is_valid(ddata->enable_gpio))
-		gpio_set_value_cansleep(ddata->enable_gpio, 0);
+	if (ddata->enable_gpio)
+		gpiod_set_value_cansleep(ddata->enable_gpio, 0);
 
 	if (gpio_is_valid(ddata->backlight_gpio))
 		gpio_set_value_cansleep(ddata->backlight_gpio, 0);
@@ -156,6 +162,7 @@ static int panel_dpi_probe_pdata(struct platform_device *pdev)
 	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
 	struct omap_dss_device *dssdev, *in;
 	struct videomode vm;
+	int r;
 
 	pdata = dev_get_platdata(&pdev->dev);
 
@@ -176,9 +183,64 @@ static int panel_dpi_probe_pdata(struct platform_device *pdev)
 	dssdev = &ddata->dssdev;
 	dssdev->name = pdata->name;
 
-	ddata->enable_gpio = pdata->enable_gpio;
+	r = devm_gpio_request_one(&pdev->dev, pdata->enable_gpio,
+					GPIOF_OUT_INIT_LOW, "panel enable");
+	if (r)
+		goto err_gpio;
+
+	ddata->enable_gpio = gpio_to_desc(pdata->enable_gpio);
+
 	ddata->backlight_gpio = pdata->backlight_gpio;
 
+	return 0;
+
+err_gpio:
+	omap_dss_put_device(ddata->in);
+	return r;
+}
+
+static int panel_dpi_probe_of(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct device_node *node = pdev->dev.of_node;
+	struct omap_dss_device *in;
+	int r;
+	struct display_timing timing;
+	struct videomode vm;
+	struct gpio_desc *gpio;
+
+	gpio = devm_gpiod_get(&pdev->dev, "enable");
+
+	if (IS_ERR(gpio)) {
+		if (PTR_ERR(gpio) != -ENOENT)
+			return PTR_ERR(gpio);
+		else
+			gpio = NULL;
+	} else {
+		gpiod_direction_output(gpio, 0);
+	}
+
+	ddata->enable_gpio = gpio;
+
+	ddata->backlight_gpio = -ENOENT;
+
+	r = of_get_display_timing(node, "panel-timing", &timing);
+	if (r) {
+		dev_err(&pdev->dev, "failed to get video timing\n");
+		return r;
+	}
+
+	videomode_from_timing(&timing, &vm);
+	videomode_to_omap_video_timings(&vm, &ddata->videomode);
+
+	in = omapdss_of_find_source_for_first_ep(node);
+	if (IS_ERR(in)) {
+		dev_err(&pdev->dev, "failed to find video source\n");
+		return PTR_ERR(in);
+	}
+
+	ddata->in = in;
+
 	return 0;
 }
 
@@ -198,17 +260,14 @@ static int panel_dpi_probe(struct platform_device *pdev)
 		r = panel_dpi_probe_pdata(pdev);
 		if (r)
 			return r;
+	} else if (pdev->dev.of_node) {
+		r = panel_dpi_probe_of(pdev);
+		if (r)
+			return r;
 	} else {
 		return -ENODEV;
 	}
 
-	if (gpio_is_valid(ddata->enable_gpio)) {
-		r = devm_gpio_request_one(&pdev->dev, ddata->enable_gpio,
-				GPIOF_OUT_INIT_LOW, "panel enable");
-		if (r)
-			goto err_gpio;
-	}
-
 	if (gpio_is_valid(ddata->backlight_gpio)) {
 		r = devm_gpio_request_one(&pdev->dev, ddata->backlight_gpio,
 				GPIOF_OUT_INIT_LOW, "panel backlight");
@@ -254,12 +313,20 @@ static int __exit panel_dpi_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct of_device_id panel_dpi_of_match[] = {
+	{ .compatible = "omapdss,panel-dpi", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, panel_dpi_of_match);
+
 static struct platform_driver panel_dpi_driver = {
 	.probe = panel_dpi_probe,
 	.remove = __exit_p(panel_dpi_remove),
 	.driver = {
 		.name = "panel-dpi",
 		.owner = THIS_MODULE,
+		.of_match_table = panel_dpi_of_match,
 	},
 };
 
diff --git a/drivers/video/fbdev/omap2/displays-new/panel-lgphilips-lb035q02.c b/drivers/video/fbdev/omap2/displays-new/panel-lgphilips-lb035q02.c
index 2e6b513222d9..cc5b5124e0b4 100644
--- a/drivers/video/fbdev/omap2/displays-new/panel-lgphilips-lb035q02.c
+++ b/drivers/video/fbdev/omap2/displays-new/panel-lgphilips-lb035q02.c
@@ -50,9 +50,10 @@ struct panel_drv_data {
 
 	struct omap_video_timings videomode;
 
-	int reset_gpio;
+	/* used for non-DT boot, to be removed */
 	int backlight_gpio;
-	int enable_gpio;
+
+	struct gpio_desc *enable_gpio;
 };
 
 #define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
@@ -158,15 +159,16 @@ static int lb035q02_enable(struct omap_dss_device *dssdev)
 	if (omapdss_device_is_enabled(dssdev))
 		return 0;
 
-	in->ops.dpi->set_data_lines(in, ddata->data_lines);
+	if (ddata->data_lines)
+		in->ops.dpi->set_data_lines(in, ddata->data_lines);
 	in->ops.dpi->set_timings(in, &ddata->videomode);
 
 	r = in->ops.dpi->enable(in);
 	if (r)
 		return r;
 
-	if (gpio_is_valid(ddata->enable_gpio))
-		gpio_set_value_cansleep(ddata->enable_gpio, 1);
+	if (ddata->enable_gpio)
+		gpiod_set_value_cansleep(ddata->enable_gpio, 1);
 
 	if (gpio_is_valid(ddata->backlight_gpio))
 		gpio_set_value_cansleep(ddata->backlight_gpio, 1);
@@ -184,8 +186,8 @@ static void lb035q02_disable(struct omap_dss_device *dssdev)
 	if (!omapdss_device_is_enabled(dssdev))
 		return;
 
-	if (gpio_is_valid(ddata->enable_gpio))
-		gpio_set_value_cansleep(ddata->enable_gpio, 0);
+	if (ddata->enable_gpio)
+		gpiod_set_value_cansleep(ddata->enable_gpio, 0);
 
 	if (gpio_is_valid(ddata->backlight_gpio))
 		gpio_set_value_cansleep(ddata->backlight_gpio, 0);
@@ -243,6 +245,7 @@ static int lb035q02_probe_pdata(struct spi_device *spi)
 	const struct panel_lb035q02_platform_data *pdata;
 	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
 	struct omap_dss_device *dssdev, *in;
+	int r;
 
 	pdata = dev_get_platdata(&spi->dev);
 
@@ -260,9 +263,47 @@ static int lb035q02_probe_pdata(struct spi_device *spi)
 	dssdev = &ddata->dssdev;
 	dssdev->name = pdata->name;
 
-	ddata->enable_gpio = pdata->enable_gpio;
+	r = devm_gpio_request_one(&spi->dev, pdata->enable_gpio,
+					GPIOF_OUT_INIT_LOW, "panel enable");
+	if (r)
+		goto err_gpio;
+
+	ddata->enable_gpio = gpio_to_desc(pdata->enable_gpio);
+
 	ddata->backlight_gpio = pdata->backlight_gpio;
 
+	return 0;
+err_gpio:
+	omap_dss_put_device(ddata->in);
+	return r;
+}
+
+static int lb035q02_probe_of(struct spi_device *spi)
+{
+	struct device_node *node = spi->dev.of_node;
+	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
+	struct omap_dss_device *in;
+	struct gpio_desc *gpio;
+
+	gpio = devm_gpiod_get(&spi->dev, "enable");
+	if (IS_ERR(gpio)) {
+		dev_err(&spi->dev, "failed to parse enable gpio\n");
+		return PTR_ERR(gpio);
+	} else {
+		gpiod_direction_output(gpio, 0);
+		ddata->enable_gpio = gpio;
+	}
+
+	ddata->backlight_gpio = -ENOENT;
+
+	in = omapdss_of_find_source_for_first_ep(node);
+	if (IS_ERR(in)) {
+		dev_err(&spi->dev, "failed to find video source\n");
+		return PTR_ERR(in);
+	}
+
+	ddata->in = in;
+
 	return 0;
 }
 
@@ -284,17 +325,14 @@ static int lb035q02_panel_spi_probe(struct spi_device *spi)
 		r = lb035q02_probe_pdata(spi);
 		if (r)
 			return r;
+	} else if (spi->dev.of_node) {
+		r = lb035q02_probe_of(spi);
+		if (r)
+			return r;
 	} else {
 		return -ENODEV;
 	}
 
-	if (gpio_is_valid(ddata->enable_gpio)) {
-		r = devm_gpio_request_one(&spi->dev, ddata->enable_gpio,
-				GPIOF_OUT_INIT_LOW, "panel enable");
-		if (r)
-			goto err_gpio;
-	}
-
 	if (gpio_is_valid(ddata->backlight_gpio)) {
 		r = devm_gpio_request_one(&spi->dev, ddata->backlight_gpio,
 				GPIOF_OUT_INIT_LOW, "panel backlight");
@@ -342,17 +380,26 @@ static int lb035q02_panel_spi_remove(struct spi_device *spi)
 	return 0;
 }
 
+static const struct of_device_id lb035q02_of_match[] = {
+	{ .compatible = "omapdss,lgphilips,lb035q02", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, lb035q02_of_match);
+
 static struct spi_driver lb035q02_spi_driver = {
 	.probe		= lb035q02_panel_spi_probe,
 	.remove		= lb035q02_panel_spi_remove,
 	.driver		= {
 		.name	= "panel_lgphilips_lb035q02",
 		.owner	= THIS_MODULE,
+		.of_match_table = lb035q02_of_match,
 	},
 };
 
 module_spi_driver(lb035q02_spi_driver);
 
+MODULE_ALIAS("spi:lgphilips,lb035q02");
 MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
 MODULE_DESCRIPTION("LG.Philips LB035Q02 LCD Panel driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/video/fbdev/omap2/displays-new/panel-nec-nl8048hl11.c b/drivers/video/fbdev/omap2/displays-new/panel-nec-nl8048hl11.c
index 996fa004b48c..3595f111aa35 100644
--- a/drivers/video/fbdev/omap2/displays-new/panel-nec-nl8048hl11.c
+++ b/drivers/video/fbdev/omap2/displays-new/panel-nec-nl8048hl11.c
@@ -16,6 +16,7 @@
 #include <linux/spi/spi.h>
 #include <linux/fb.h>
 #include <linux/gpio.h>
+#include <linux/of_gpio.h>
 
 #include <video/omapdss.h>
 #include <video/omap-panel-data.h>
@@ -156,7 +157,8 @@ static int nec_8048_enable(struct omap_dss_device *dssdev)
 	if (omapdss_device_is_enabled(dssdev))
 		return 0;
 
-	in->ops.dpi->set_data_lines(in, ddata->data_lines);
+	if (ddata->data_lines)
+		in->ops.dpi->set_data_lines(in, ddata->data_lines);
 	in->ops.dpi->set_timings(in, &ddata->videomode);
 
 	r = in->ops.dpi->enable(in);
@@ -258,6 +260,34 @@ static int nec_8048_probe_pdata(struct spi_device *spi)
 	return 0;
 }
 
+static int nec_8048_probe_of(struct spi_device *spi)
+{
+	struct device_node *node = spi->dev.of_node;
+	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
+	struct omap_dss_device *in;
+	int gpio;
+
+	gpio = of_get_named_gpio(node, "reset-gpios", 0);
+	if (!gpio_is_valid(gpio)) {
+		dev_err(&spi->dev, "failed to parse enable gpio\n");
+		return gpio;
+	}
+	ddata->res_gpio = gpio;
+
+	/* XXX the panel spec doesn't mention any QVGA pin?? */
+	ddata->qvga_gpio = -ENOENT;
+
+	in = omapdss_of_find_source_for_first_ep(node);
+	if (IS_ERR(in)) {
+		dev_err(&spi->dev, "failed to find video source\n");
+		return PTR_ERR(in);
+	}
+
+	ddata->in = in;
+
+	return 0;
+}
+
 static int nec_8048_probe(struct spi_device *spi)
 {
 	struct panel_drv_data *ddata;
@@ -289,6 +319,10 @@ static int nec_8048_probe(struct spi_device *spi)
 		r = nec_8048_probe_pdata(spi);
 		if (r)
 			return r;
+	} else if (spi->dev.of_node) {
+		r = nec_8048_probe_of(spi);
+		if (r)
+			return r;
 	} else {
 		return -ENODEV;
 	}
@@ -377,11 +411,19 @@ static SIMPLE_DEV_PM_OPS(nec_8048_pm_ops, nec_8048_suspend,
 #define NEC_8048_PM_OPS NULL
 #endif
 
+static const struct of_device_id nec_8048_of_match[] = {
+	{ .compatible = "omapdss,nec,nl8048hl11", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, nec_8048_of_match);
+
 static struct spi_driver nec_8048_driver = {
 	.driver = {
 		.name	= "panel-nec-nl8048hl11",
 		.owner	= THIS_MODULE,
 		.pm	= NEC_8048_PM_OPS,
+		.of_match_table = nec_8048_of_match,
 	},
 	.probe	= nec_8048_probe,
 	.remove	= nec_8048_remove,
@@ -389,6 +431,7 @@ static struct spi_driver nec_8048_driver = {
 
 module_spi_driver(nec_8048_driver);
 
+MODULE_ALIAS("spi:nec,nl8048hl11");
 MODULE_AUTHOR("Erik Gilling <konkers@android.com>");
 MODULE_DESCRIPTION("NEC-NL8048HL11 Driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/video/fbdev/omap2/displays-new/panel-sharp-ls037v7dw01.c b/drivers/video/fbdev/omap2/displays-new/panel-sharp-ls037v7dw01.c
index b2f710be565d..f1f72ce50a17 100644
--- a/drivers/video/fbdev/omap2/displays-new/panel-sharp-ls037v7dw01.c
+++ b/drivers/video/fbdev/omap2/displays-new/panel-sharp-ls037v7dw01.c
@@ -12,25 +12,28 @@
 #include <linux/delay.h>
 #include <linux/gpio.h>
 #include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
-
+#include <linux/regulator/consumer.h>
 #include <video/omapdss.h>
 #include <video/omap-panel-data.h>
 
 struct panel_drv_data {
 	struct omap_dss_device dssdev;
 	struct omap_dss_device *in;
+	struct regulator *vcc;
 
 	int data_lines;
 
 	struct omap_video_timings videomode;
 
-	int resb_gpio;
-	int ini_gpio;
-	int mo_gpio;
-	int lr_gpio;
-	int ud_gpio;
+	struct gpio_desc *resb_gpio;	/* low = reset active min 20 us */
+	struct gpio_desc *ini_gpio;	/* high = power on */
+	struct gpio_desc *mo_gpio;	/* low = 480x640, high = 240x320 */
+	struct gpio_desc *lr_gpio;	/* high = conventional horizontal scanning */
+	struct gpio_desc *ud_gpio;	/* high = conventional vertical scanning */
 };
 
 static const struct omap_video_timings sharp_ls_timings = {
@@ -95,21 +98,30 @@ static int sharp_ls_enable(struct omap_dss_device *dssdev)
 	if (omapdss_device_is_enabled(dssdev))
 		return 0;
 
-	in->ops.dpi->set_data_lines(in, ddata->data_lines);
+	if (ddata->data_lines)
+		in->ops.dpi->set_data_lines(in, ddata->data_lines);
 	in->ops.dpi->set_timings(in, &ddata->videomode);
 
+	if (ddata->vcc) {
+		r = regulator_enable(ddata->vcc);
+		if (r != 0)
+			return r;
+	}
+
 	r = in->ops.dpi->enable(in);
-	if (r)
+	if (r) {
+		regulator_disable(ddata->vcc);
 		return r;
+	}
 
 	/* wait couple of vsyncs until enabling the LCD */
 	msleep(50);
 
-	if (gpio_is_valid(ddata->resb_gpio))
-		gpio_set_value_cansleep(ddata->resb_gpio, 1);
+	if (ddata->resb_gpio)
+		gpiod_set_value_cansleep(ddata->resb_gpio, 1);
 
-	if (gpio_is_valid(ddata->ini_gpio))
-		gpio_set_value_cansleep(ddata->ini_gpio, 1);
+	if (ddata->ini_gpio)
+		gpiod_set_value_cansleep(ddata->ini_gpio, 1);
 
 	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
 
@@ -124,11 +136,11 @@ static void sharp_ls_disable(struct omap_dss_device *dssdev)
 	if (!omapdss_device_is_enabled(dssdev))
 		return;
 
-	if (gpio_is_valid(ddata->ini_gpio))
-		gpio_set_value_cansleep(ddata->ini_gpio, 0);
+	if (ddata->ini_gpio)
+		gpiod_set_value_cansleep(ddata->ini_gpio, 0);
 
-	if (gpio_is_valid(ddata->resb_gpio))
-		gpio_set_value_cansleep(ddata->resb_gpio, 0);
+	if (ddata->resb_gpio)
+		gpiod_set_value_cansleep(ddata->resb_gpio, 0);
 
 	/* wait at least 5 vsyncs after disabling the LCD */
 
@@ -136,6 +148,9 @@ static void sharp_ls_disable(struct omap_dss_device *dssdev)
 
 	in->ops.dpi->disable(in);
 
+	if (ddata->vcc)
+		regulator_disable(ddata->vcc);
+
 	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
 }
 
@@ -182,11 +197,32 @@ static struct omap_dss_driver sharp_ls_ops = {
 	.get_resolution	= omapdss_default_get_resolution,
 };
 
+static int sharp_ls_get_gpio(struct device *dev, int gpio, unsigned long flags,
+		  char *desc, struct gpio_desc **gpiod)
+{
+	struct gpio_desc *gd;
+	int r;
+
+	*gpiod = NULL;
+
+	r = devm_gpio_request_one(dev, gpio, flags, desc);
+	if (r)
+		return r == -ENOENT ? 0 : r;
+
+	gd = gpio_to_desc(gpio);
+	if (IS_ERR(gd))
+		return PTR_ERR(gd) == -ENOENT ? 0 : PTR_ERR(gd);
+
+	*gpiod = gd;
+	return 0;
+}
+
 static int sharp_ls_probe_pdata(struct platform_device *pdev)
 {
 	const struct panel_sharp_ls037v7dw01_platform_data *pdata;
 	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
 	struct omap_dss_device *dssdev, *in;
+	int r;
 
 	pdata = dev_get_platdata(&pdev->dev);
 
@@ -204,11 +240,95 @@ static int sharp_ls_probe_pdata(struct platform_device *pdev)
 	dssdev = &ddata->dssdev;
 	dssdev->name = pdata->name;
 
-	ddata->resb_gpio = pdata->resb_gpio;
-	ddata->ini_gpio = pdata->ini_gpio;
-	ddata->mo_gpio = pdata->mo_gpio;
-	ddata->lr_gpio = pdata->lr_gpio;
-	ddata->ud_gpio = pdata->ud_gpio;
+	r = sharp_ls_get_gpio(&pdev->dev, pdata->mo_gpio, GPIOF_OUT_INIT_LOW,
+		"lcd MO", &ddata->mo_gpio);
+	if (r)
+		return r;
+	r = sharp_ls_get_gpio(&pdev->dev, pdata->lr_gpio, GPIOF_OUT_INIT_HIGH,
+		"lcd LR", &ddata->lr_gpio);
+	if (r)
+		return r;
+	r = sharp_ls_get_gpio(&pdev->dev, pdata->ud_gpio, GPIOF_OUT_INIT_HIGH,
+		"lcd UD", &ddata->ud_gpio);
+	if (r)
+		return r;
+	r = sharp_ls_get_gpio(&pdev->dev, pdata->resb_gpio, GPIOF_OUT_INIT_LOW,
+		"lcd RESB", &ddata->resb_gpio);
+	if (r)
+		return r;
+	r = sharp_ls_get_gpio(&pdev->dev, pdata->ini_gpio, GPIOF_OUT_INIT_LOW,
+		"lcd INI", &ddata->ini_gpio);
+	if (r)
+		return r;
+
+	return 0;
+}
+
+static  int sharp_ls_get_gpio_of(struct device *dev, int index, int val,
+	const char *desc, struct gpio_desc **gpiod)
+{
+	struct gpio_desc *gd;
+	int r;
+
+	*gpiod = NULL;
+
+	gd = devm_gpiod_get_index(dev, desc, index);
+	if (IS_ERR(gd))
+		return PTR_ERR(gd) == -ENOENT ? 0 : PTR_ERR(gd);
+
+	r = gpiod_direction_output(gd, val);
+	if (r)
+		return r;
+
+	*gpiod = gd;
+	return 0;
+}
+
+static int sharp_ls_probe_of(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct device_node *node = pdev->dev.of_node;
+	struct omap_dss_device *in;
+	int r;
+
+	ddata->vcc = devm_regulator_get(&pdev->dev, "envdd");
+	if (IS_ERR(ddata->vcc)) {
+		dev_err(&pdev->dev, "failed to get regulator\n");
+		return PTR_ERR(ddata->vcc);
+	}
+
+	/* lcd INI */
+	r = sharp_ls_get_gpio_of(&pdev->dev, 0, 0, "enable", &ddata->ini_gpio);
+	if (r)
+		return r;
+
+	/* lcd RESB */
+	r = sharp_ls_get_gpio_of(&pdev->dev, 0, 0, "reset", &ddata->resb_gpio);
+	if (r)
+		return r;
+
+	/* lcd MO */
+	r = sharp_ls_get_gpio_of(&pdev->dev, 0, 0, "mode", &ddata->mo_gpio);
+	if (r)
+		return r;
+
+	/* lcd LR */
+	r = sharp_ls_get_gpio_of(&pdev->dev, 1, 1, "mode", &ddata->lr_gpio);
+	if (r)
+		return r;
+
+	/* lcd UD */
+	r = sharp_ls_get_gpio_of(&pdev->dev, 2, 1, "mode", &ddata->ud_gpio);
+	if (r)
+		return r;
+
+	in = omapdss_of_find_source_for_first_ep(node);
+	if (IS_ERR(in)) {
+		dev_err(&pdev->dev, "failed to find video source\n");
+		return PTR_ERR(in);
+	}
+
+	ddata->in = in;
 
 	return 0;
 }
@@ -229,45 +349,14 @@ static int sharp_ls_probe(struct platform_device *pdev)
 		r = sharp_ls_probe_pdata(pdev);
 		if (r)
 			return r;
+	} else if (pdev->dev.of_node) {
+		r = sharp_ls_probe_of(pdev);
+		if (r)
+			return r;
 	} else {
 		return -ENODEV;
 	}
 
-	if (gpio_is_valid(ddata->mo_gpio)) {
-		r = devm_gpio_request_one(&pdev->dev, ddata->mo_gpio,
-				GPIOF_OUT_INIT_LOW, "lcd MO");
-		if (r)
-			goto err_gpio;
-	}
-
-	if (gpio_is_valid(ddata->lr_gpio)) {
-		r = devm_gpio_request_one(&pdev->dev, ddata->lr_gpio,
-				GPIOF_OUT_INIT_HIGH, "lcd LR");
-		if (r)
-			goto err_gpio;
-	}
-
-	if (gpio_is_valid(ddata->ud_gpio)) {
-		r = devm_gpio_request_one(&pdev->dev, ddata->ud_gpio,
-				GPIOF_OUT_INIT_HIGH, "lcd UD");
-		if (r)
-			goto err_gpio;
-	}
-
-	if (gpio_is_valid(ddata->resb_gpio)) {
-		r = devm_gpio_request_one(&pdev->dev, ddata->resb_gpio,
-				GPIOF_OUT_INIT_LOW, "lcd RESB");
-		if (r)
-			goto err_gpio;
-	}
-
-	if (gpio_is_valid(ddata->ini_gpio)) {
-		r = devm_gpio_request_one(&pdev->dev, ddata->ini_gpio,
-				GPIOF_OUT_INIT_LOW, "lcd INI");
-		if (r)
-			goto err_gpio;
-	}
-
 	ddata->videomode = sharp_ls_timings;
 
 	dssdev = &ddata->dssdev;
@@ -287,7 +376,6 @@ static int sharp_ls_probe(struct platform_device *pdev)
 	return 0;
 
 err_reg:
-err_gpio:
 	omap_dss_put_device(ddata->in);
 	return r;
 }
@@ -308,12 +396,20 @@ static int __exit sharp_ls_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct of_device_id sharp_ls_of_match[] = {
+	{ .compatible = "omapdss,sharp,ls037v7dw01", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, sharp_ls_of_match);
+
 static struct platform_driver sharp_ls_driver = {
 	.probe = sharp_ls_probe,
 	.remove = __exit_p(sharp_ls_remove),
 	.driver = {
 		.name = "panel-sharp-ls037v7dw01",
 		.owner = THIS_MODULE,
+		.of_match_table = sharp_ls_of_match,
 	},
 };
 
diff --git a/drivers/video/fbdev/omap2/displays-new/panel-tpo-td028ttec1.c b/drivers/video/fbdev/omap2/displays-new/panel-tpo-td028ttec1.c
index fae6adc005a7..728808bcceeb 100644
--- a/drivers/video/fbdev/omap2/displays-new/panel-tpo-td028ttec1.c
+++ b/drivers/video/fbdev/omap2/displays-new/panel-tpo-td028ttec1.c
@@ -206,7 +206,8 @@ static int td028ttec1_panel_enable(struct omap_dss_device *dssdev)
 	if (omapdss_device_is_enabled(dssdev))
 		return 0;
 
-	in->ops.dpi->set_data_lines(in, ddata->data_lines);
+	if (ddata->data_lines)
+		in->ops.dpi->set_data_lines(in, ddata->data_lines);
 	in->ops.dpi->set_timings(in, &ddata->videomode);
 
 	r = in->ops.dpi->enable(in);
@@ -389,6 +390,23 @@ static int td028ttec1_panel_probe_pdata(struct spi_device *spi)
 	return 0;
 }
 
+static int td028ttec1_probe_of(struct spi_device *spi)
+{
+	struct device_node *node = spi->dev.of_node;
+	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
+	struct omap_dss_device *in;
+
+	in = omapdss_of_find_source_for_first_ep(node);
+	if (IS_ERR(in)) {
+		dev_err(&spi->dev, "failed to find video source\n");
+		return PTR_ERR(in);
+	}
+
+	ddata->in = in;
+
+	return 0;
+}
+
 static int td028ttec1_panel_probe(struct spi_device *spi)
 {
 	struct panel_drv_data *ddata;
@@ -418,6 +436,10 @@ static int td028ttec1_panel_probe(struct spi_device *spi)
 		r = td028ttec1_panel_probe_pdata(spi);
 		if (r)
 			return r;
+	} else if (spi->dev.of_node) {
+		r = td028ttec1_probe_of(spi);
+		if (r)
+			return r;
 	} else {
 		return -ENODEV;
 	}
@@ -463,6 +485,13 @@ static int td028ttec1_panel_remove(struct spi_device *spi)
 	return 0;
 }
 
+static const struct of_device_id td028ttec1_of_match[] = {
+	{ .compatible = "omapdss,toppoly,td028ttec1", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, td028ttec1_of_match);
+
 static struct spi_driver td028ttec1_spi_driver = {
 	.probe		= td028ttec1_panel_probe,
 	.remove		= td028ttec1_panel_remove,
@@ -470,11 +499,13 @@ static struct spi_driver td028ttec1_spi_driver = {
 	.driver         = {
 		.name   = "panel-tpo-td028ttec1",
 		.owner  = THIS_MODULE,
+		.of_match_table = td028ttec1_of_match,
 	},
 };
 
 module_spi_driver(td028ttec1_spi_driver);
 
+MODULE_ALIAS("spi:toppoly,td028ttec1");
 MODULE_AUTHOR("H. Nikolaus Schaller <hns@goldelico.com>");
 MODULE_DESCRIPTION("Toppoly TD028TTEC1 panel driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/video/fbdev/omap2/displays-new/panel-tpo-td043mtea1.c b/drivers/video/fbdev/omap2/displays-new/panel-tpo-td043mtea1.c
index 875b40263b33..de78ab0caaa8 100644
--- a/drivers/video/fbdev/omap2/displays-new/panel-tpo-td043mtea1.c
+++ b/drivers/video/fbdev/omap2/displays-new/panel-tpo-td043mtea1.c
@@ -17,6 +17,7 @@
 #include <linux/gpio.h>
 #include <linux/err.h>
 #include <linux/slab.h>
+#include <linux/of_gpio.h>
 
 #include <video/omapdss.h>
 #include <video/omap-panel-data.h>
@@ -376,7 +377,8 @@ static int tpo_td043_enable(struct omap_dss_device *dssdev)
 	if (omapdss_device_is_enabled(dssdev))
 		return 0;
 
-	in->ops.dpi->set_data_lines(in, ddata->data_lines);
+	if (ddata->data_lines)
+		in->ops.dpi->set_data_lines(in, ddata->data_lines);
 	in->ops.dpi->set_timings(in, &ddata->videomode);
 
 	r = in->ops.dpi->enable(in);
@@ -489,6 +491,31 @@ static int tpo_td043_probe_pdata(struct spi_device *spi)
 	return 0;
 }
 
+static int tpo_td043_probe_of(struct spi_device *spi)
+{
+	struct device_node *node = spi->dev.of_node;
+	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
+	struct omap_dss_device *in;
+	int gpio;
+
+	gpio = of_get_named_gpio(node, "reset-gpios", 0);
+	if (!gpio_is_valid(gpio)) {
+		dev_err(&spi->dev, "failed to parse enable gpio\n");
+		return gpio;
+	}
+	ddata->nreset_gpio = gpio;
+
+	in = omapdss_of_find_source_for_first_ep(node);
+	if (IS_ERR(in)) {
+		dev_err(&spi->dev, "failed to find video source\n");
+		return PTR_ERR(in);
+	}
+
+	ddata->in = in;
+
+	return 0;
+}
+
 static int tpo_td043_probe(struct spi_device *spi)
 {
 	struct panel_drv_data *ddata;
@@ -518,6 +545,10 @@ static int tpo_td043_probe(struct spi_device *spi)
 		r = tpo_td043_probe_pdata(spi);
 		if (r)
 			return r;
+	} else if (spi->dev.of_node) {
+		r = tpo_td043_probe_of(spi);
+		if (r)
+			return r;
 	} else {
 		return -ENODEV;
 	}
@@ -629,11 +660,19 @@ static int tpo_td043_spi_resume(struct device *dev)
 static SIMPLE_DEV_PM_OPS(tpo_td043_spi_pm,
 	tpo_td043_spi_suspend, tpo_td043_spi_resume);
 
+static const struct of_device_id tpo_td043_of_match[] = {
+	{ .compatible = "omapdss,tpo,td043mtea1", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, tpo_td043_of_match);
+
 static struct spi_driver tpo_td043_spi_driver = {
 	.driver = {
 		.name	= "panel-tpo-td043mtea1",
 		.owner	= THIS_MODULE,
 		.pm	= &tpo_td043_spi_pm,
+		.of_match_table = tpo_td043_of_match,
 	},
 	.probe	= tpo_td043_probe,
 	.remove	= tpo_td043_remove,
@@ -641,6 +680,7 @@ static struct spi_driver tpo_td043_spi_driver = {
 
 module_spi_driver(tpo_td043_spi_driver);
 
+MODULE_ALIAS("spi:tpo,td043mtea1");
 MODULE_AUTHOR("Gražvydas Ignotas <notasas@gmail.com>");
 MODULE_DESCRIPTION("TPO TD043MTEA1 LCD Driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/video/fbdev/omap2/dss/Kconfig b/drivers/video/fbdev/omap2/dss/Kconfig
index dde4281663b1..285bcd103dce 100644
--- a/drivers/video/fbdev/omap2/dss/Kconfig
+++ b/drivers/video/fbdev/omap2/dss/Kconfig
@@ -1,6 +1,10 @@
+config OMAP2_DSS_INIT
+	bool
+
 menuconfig OMAP2_DSS
         tristate "OMAP2+ Display Subsystem support"
 	select VIDEOMODE_HELPERS
+	select OMAP2_DSS_INIT
         help
 	  OMAP2+ Display Subsystem support.
 
@@ -59,16 +63,32 @@ config OMAP2_DSS_VENC
 	help
 	  OMAP Video Encoder support for S-Video and composite TV-out.
 
+config OMAP2_DSS_HDMI_COMMON
+	bool
+
 config OMAP4_DSS_HDMI
-	bool "HDMI support"
+	bool "HDMI support for OMAP4"
         default y
+	select OMAP2_DSS_HDMI_COMMON
 	help
-	  HDMI Interface. This adds the High Definition Multimedia Interface.
-	  See http://www.hdmi.org/ for HDMI specification.
+	  HDMI support for OMAP4 based SoCs.
 
 config OMAP4_DSS_HDMI_AUDIO
 	bool
 
+config OMAP5_DSS_HDMI
+	bool "HDMI support for OMAP5"
+	default n
+	select OMAP2_DSS_HDMI_COMMON
+	help
+	  HDMI Interface for OMAP5 and similar cores. This adds the High
+	  Definition Multimedia Interface. See http://www.hdmi.org/ for HDMI
+	  specification.
+
+config OMAP5_DSS_HDMI_AUDIO
+	depends on OMAP5_DSS_HDMI
+	bool
+
 config OMAP2_DSS_SDI
 	bool "SDI support"
         default n
diff --git a/drivers/video/fbdev/omap2/dss/Makefile b/drivers/video/fbdev/omap2/dss/Makefile
index 8aec8bda27cc..245f933060ee 100644
--- a/drivers/video/fbdev/omap2/dss/Makefile
+++ b/drivers/video/fbdev/omap2/dss/Makefile
@@ -1,3 +1,4 @@
+obj-$(CONFIG_OMAP2_DSS_INIT) += omapdss-boot-init.o
 obj-$(CONFIG_OMAP2_DSS) += omapdss.o
 # Core DSS files
 omapdss-y := core.o dss.o dss_features.o dispc.o dispc_coefs.o display.o \
@@ -10,6 +11,8 @@ omapdss-$(CONFIG_OMAP2_DSS_RFBI) += rfbi.o
 omapdss-$(CONFIG_OMAP2_DSS_VENC) += venc.o
 omapdss-$(CONFIG_OMAP2_DSS_SDI) += sdi.o
 omapdss-$(CONFIG_OMAP2_DSS_DSI) += dsi.o
-omapdss-$(CONFIG_OMAP4_DSS_HDMI) += hdmi4.o hdmi_common.o hdmi_wp.o hdmi_pll.o \
-	hdmi_phy.o hdmi4_core.o
+omapdss-$(CONFIG_OMAP2_DSS_HDMI_COMMON) += hdmi_common.o hdmi_wp.o hdmi_pll.o \
+	hdmi_phy.o
+omapdss-$(CONFIG_OMAP4_DSS_HDMI) += hdmi4.o hdmi4_core.o
+omapdss-$(CONFIG_OMAP5_DSS_HDMI) += hdmi5.o hdmi5_core.o
 ccflags-$(CONFIG_OMAP2_DSS_DEBUG) += -DDEBUG
diff --git a/drivers/video/fbdev/omap2/dss/core.c b/drivers/video/fbdev/omap2/dss/core.c
index ffa45c894cd4..6b74f73fb524 100644
--- a/drivers/video/fbdev/omap2/dss/core.c
+++ b/drivers/video/fbdev/omap2/dss/core.c
@@ -268,6 +268,9 @@ static int (*dss_output_drv_reg_funcs[])(void) __initdata = {
 #ifdef CONFIG_OMAP4_DSS_HDMI
 	hdmi4_init_platform_driver,
 #endif
+#ifdef CONFIG_OMAP5_DSS_HDMI
+	hdmi5_init_platform_driver,
+#endif
 };
 
 static void (*dss_output_drv_unreg_funcs[])(void) __exitdata = {
@@ -289,6 +292,9 @@ static void (*dss_output_drv_unreg_funcs[])(void) __exitdata = {
 #ifdef CONFIG_OMAP4_DSS_HDMI
 	hdmi4_uninit_platform_driver,
 #endif
+#ifdef CONFIG_OMAP5_DSS_HDMI
+	hdmi5_uninit_platform_driver,
+#endif
 };
 
 static bool dss_output_drv_loaded[ARRAY_SIZE(dss_output_drv_reg_funcs)];
diff --git a/drivers/video/fbdev/omap2/dss/dispc.c b/drivers/video/fbdev/omap2/dss/dispc.c
index f18397c33e8f..7aa33b0f4a1f 100644
--- a/drivers/video/fbdev/omap2/dss/dispc.c
+++ b/drivers/video/fbdev/omap2/dss/dispc.c
@@ -2577,9 +2577,9 @@ int dispc_ovl_setup(enum omap_plane plane, const struct omap_overlay_info *oi,
 
 	channel = dispc_ovl_get_channel_out(plane);
 
-	DSSDBG("dispc_ovl_setup %d, pa %x, pa_uv %x, sw %d, %d,%d, %dx%d -> "
-		"%dx%d, cmode %x, rot %d, mir %d, chan %d repl %d\n",
-		plane, oi->paddr, oi->p_uv_addr, oi->screen_width, oi->pos_x,
+	DSSDBG("dispc_ovl_setup %d, pa %pad, pa_uv %pad, sw %d, %d,%d, %dx%d ->"
+		" %dx%d, cmode %x, rot %d, mir %d, chan %d repl %d\n",
+		plane, &oi->paddr, &oi->p_uv_addr, oi->screen_width, oi->pos_x,
 		oi->pos_y, oi->width, oi->height, oi->out_width, oi->out_height,
 		oi->color_mode, oi->rotation, oi->mirror, channel, replication);
 
@@ -2945,13 +2945,13 @@ static void _dispc_mgr_set_lcd_timings(enum omap_channel channel, int hsw,
 		BUG();
 	}
 
-	l = dispc_read_reg(DISPC_POL_FREQ(channel));
-	l |= FLD_VAL(onoff, 17, 17);
-	l |= FLD_VAL(rf, 16, 16);
-	l |= FLD_VAL(de_level, 15, 15);
-	l |= FLD_VAL(ipc, 14, 14);
-	l |= FLD_VAL(hsync_level, 13, 13);
-	l |= FLD_VAL(vsync_level, 12, 12);
+	l = FLD_VAL(onoff, 17, 17) |
+		FLD_VAL(rf, 16, 16) |
+		FLD_VAL(de_level, 15, 15) |
+		FLD_VAL(ipc, 14, 14) |
+		FLD_VAL(hsync_level, 13, 13) |
+		FLD_VAL(vsync_level, 12, 12);
+
 	dispc_write_reg(DISPC_POL_FREQ(channel), l);
 }
 
@@ -3656,6 +3656,7 @@ static int __init dispc_init_features(struct platform_device *pdev)
 	case OMAPDSS_VER_OMAP34xx_ES3:
 	case OMAPDSS_VER_OMAP3630:
 	case OMAPDSS_VER_AM35xx:
+	case OMAPDSS_VER_AM43xx:
 		src = &omap34xx_rev3_0_dispc_feats;
 		break;
 
@@ -3829,6 +3830,7 @@ static const struct of_device_id dispc_of_match[] = {
 	{ .compatible = "ti,omap2-dispc", },
 	{ .compatible = "ti,omap3-dispc", },
 	{ .compatible = "ti,omap4-dispc", },
+	{ .compatible = "ti,omap5-dispc", },
 	{},
 };
 
diff --git a/drivers/video/fbdev/omap2/dss/dpi.c b/drivers/video/fbdev/omap2/dss/dpi.c
index 157921db447a..9368972d6962 100644
--- a/drivers/video/fbdev/omap2/dss/dpi.c
+++ b/drivers/video/fbdev/omap2/dss/dpi.c
@@ -67,6 +67,7 @@ static struct platform_device *dpi_get_dsidev(enum omap_channel channel)
 	case OMAPDSS_VER_OMAP34xx_ES3:
 	case OMAPDSS_VER_OMAP3630:
 	case OMAPDSS_VER_AM35xx:
+	case OMAPDSS_VER_AM43xx:
 		return NULL;
 
 	case OMAPDSS_VER_OMAP4430_ES1:
@@ -103,6 +104,8 @@ static enum omap_dss_clk_source dpi_get_alt_clk_src(enum omap_channel channel)
 		return OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DISPC;
 	case OMAP_DSS_CHANNEL_LCD2:
 		return OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DISPC;
+	case OMAP_DSS_CHANNEL_LCD3:
+		return OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DISPC;
 	default:
 		/* this shouldn't happen */
 		WARN_ON(1);
@@ -595,6 +598,7 @@ static enum omap_channel dpi_get_channel(void)
 	case OMAPDSS_VER_OMAP34xx_ES3:
 	case OMAPDSS_VER_OMAP3630:
 	case OMAPDSS_VER_AM35xx:
+	case OMAPDSS_VER_AM43xx:
 		return OMAP_DSS_CHANNEL_LCD;
 
 	case OMAPDSS_VER_OMAP4430_ES1:
diff --git a/drivers/video/fbdev/omap2/dss/dsi.c b/drivers/video/fbdev/omap2/dss/dsi.c
index 8be9b04d8849..4755a34a5422 100644
--- a/drivers/video/fbdev/omap2/dss/dsi.c
+++ b/drivers/video/fbdev/omap2/dss/dsi.c
@@ -1161,6 +1161,7 @@ static int dsi_regulator_init(struct platform_device *dsidev)
 {
 	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
 	struct regulator *vdds_dsi;
+	int r;
 
 	if (dsi->vdds_dsi_reg != NULL)
 		return 0;
@@ -1173,6 +1174,15 @@ static int dsi_regulator_init(struct platform_device *dsidev)
 		return PTR_ERR(vdds_dsi);
 	}
 
+	if (regulator_can_change_voltage(vdds_dsi)) {
+		r = regulator_set_voltage(vdds_dsi, 1800000, 1800000);
+		if (r) {
+			devm_regulator_put(vdds_dsi);
+			DSSERR("can't set the DSI regulator voltage\n");
+			return r;
+		}
+	}
+
 	dsi->vdds_dsi_reg = vdds_dsi;
 
 	return 0;
@@ -5122,6 +5132,7 @@ static enum omap_channel dsi_get_channel(int module_id)
 {
 	switch (omapdss_get_version()) {
 	case OMAPDSS_VER_OMAP24xx:
+	case OMAPDSS_VER_AM43xx:
 		DSSWARN("DSI not supported\n");
 		return OMAP_DSS_CHANNEL_LCD;
 
@@ -5723,9 +5734,16 @@ static const struct dsi_module_id_data dsi_of_data_omap4[] = {
 	{ },
 };
 
+static const struct dsi_module_id_data dsi_of_data_omap5[] = {
+	{ .address = 0x58004000, .id = 0, },
+	{ .address = 0x58009000, .id = 1, },
+	{ },
+};
+
 static const struct of_device_id dsi_of_match[] = {
 	{ .compatible = "ti,omap3-dsi", .data = dsi_of_data_omap3, },
 	{ .compatible = "ti,omap4-dsi", .data = dsi_of_data_omap4, },
+	{ .compatible = "ti,omap5-dsi", .data = dsi_of_data_omap5, },
 	{},
 };
 
diff --git a/drivers/video/fbdev/omap2/dss/dss.c b/drivers/video/fbdev/omap2/dss/dss.c
index d55266c0e029..6daeb7ed44c6 100644
--- a/drivers/video/fbdev/omap2/dss/dss.c
+++ b/drivers/video/fbdev/omap2/dss/dss.c
@@ -728,6 +728,13 @@ static const struct dss_features omap54xx_dss_feats __initconst = {
 	.dpi_select_source	=	&dss_dpi_select_source_omap5,
 };
 
+static const struct dss_features am43xx_dss_feats __initconst = {
+	.fck_div_max		=	0,
+	.dss_fck_multiplier	=	0,
+	.parent_clk_name	=	NULL,
+	.dpi_select_source	=	&dss_dpi_select_source_omap2_omap3,
+};
+
 static int __init dss_init_features(struct platform_device *pdev)
 {
 	const struct dss_features *src;
@@ -764,6 +771,10 @@ static int __init dss_init_features(struct platform_device *pdev)
 		src = &omap54xx_dss_feats;
 		break;
 
+	case OMAPDSS_VER_AM43xx:
+		src = &am43xx_dss_feats;
+		break;
+
 	default:
 		return -ENODEV;
 	}
@@ -784,12 +795,8 @@ static int __init dss_init_ports(struct platform_device *pdev)
 		return 0;
 
 	port = omapdss_of_get_next_port(parent, NULL);
-	if (!port) {
-#ifdef CONFIG_OMAP2_DSS_DPI
-		dpi_init_port(pdev, parent);
-#endif
+	if (!port)
 		return 0;
-	}
 
 	do {
 		u32 reg;
@@ -813,7 +820,7 @@ static int __init dss_init_ports(struct platform_device *pdev)
 	return 0;
 }
 
-static void dss_uninit_ports(void)
+static void __exit dss_uninit_ports(void)
 {
 #ifdef CONFIG_OMAP2_DSS_DPI
 	dpi_uninit_port();
@@ -946,6 +953,7 @@ static const struct of_device_id dss_of_match[] = {
 	{ .compatible = "ti,omap2-dss", },
 	{ .compatible = "ti,omap3-dss", },
 	{ .compatible = "ti,omap4-dss", },
+	{ .compatible = "ti,omap5-dss", },
 	{},
 };
 
diff --git a/drivers/video/fbdev/omap2/dss/dss.h b/drivers/video/fbdev/omap2/dss/dss.h
index 560078fcb198..8ff22c134c62 100644
--- a/drivers/video/fbdev/omap2/dss/dss.h
+++ b/drivers/video/fbdev/omap2/dss/dss.h
@@ -419,6 +419,9 @@ void venc_uninit_platform_driver(void) __exit;
 int hdmi4_init_platform_driver(void) __init;
 void hdmi4_uninit_platform_driver(void) __exit;
 
+int hdmi5_init_platform_driver(void) __init;
+void hdmi5_uninit_platform_driver(void) __exit;
+
 /* RFBI */
 int rfbi_init_platform_driver(void) __init;
 void rfbi_uninit_platform_driver(void) __exit;
diff --git a/drivers/video/fbdev/omap2/dss/dss_features.c b/drivers/video/fbdev/omap2/dss/dss_features.c
index 7f8969191dc6..15088df7bd16 100644
--- a/drivers/video/fbdev/omap2/dss/dss_features.c
+++ b/drivers/video/fbdev/omap2/dss/dss_features.c
@@ -93,6 +93,17 @@ static const struct dss_reg_field omap3_dss_reg_fields[] = {
 	[FEAT_REG_DSIPLL_REGM_DSI]		= { 26, 23 },
 };
 
+static const struct dss_reg_field am43xx_dss_reg_fields[] = {
+	[FEAT_REG_FIRHINC]			= { 12, 0 },
+	[FEAT_REG_FIRVINC]			= { 28, 16 },
+	[FEAT_REG_FIFOLOWTHRESHOLD]	= { 11, 0 },
+	[FEAT_REG_FIFOHIGHTHRESHOLD]		= { 27, 16 },
+	[FEAT_REG_FIFOSIZE]		= { 10, 0 },
+	[FEAT_REG_HORIZONTALACCU]		= { 9, 0 },
+	[FEAT_REG_VERTICALACCU]			= { 25, 16 },
+	[FEAT_REG_DISPC_CLK_SWITCH]		= { 0, 0 },
+};
+
 static const struct dss_reg_field omap4_dss_reg_fields[] = {
 	[FEAT_REG_FIRHINC]			= { 12, 0 },
 	[FEAT_REG_FIRVINC]			= { 28, 16 },
@@ -149,6 +160,11 @@ static const enum omap_display_type omap3630_dss_supported_displays[] = {
 	OMAP_DISPLAY_TYPE_VENC,
 };
 
+static const enum omap_display_type am43xx_dss_supported_displays[] = {
+	/* OMAP_DSS_CHANNEL_LCD */
+	OMAP_DISPLAY_TYPE_DPI | OMAP_DISPLAY_TYPE_DBI,
+};
+
 static const enum omap_display_type omap4_dss_supported_displays[] = {
 	/* OMAP_DSS_CHANNEL_LCD */
 	OMAP_DISPLAY_TYPE_DBI | OMAP_DISPLAY_TYPE_DSI,
@@ -200,6 +216,11 @@ static const enum omap_dss_output_id omap3630_dss_supported_outputs[] = {
 	OMAP_DSS_OUTPUT_VENC,
 };
 
+static const enum omap_dss_output_id am43xx_dss_supported_outputs[] = {
+	/* OMAP_DSS_CHANNEL_LCD */
+	OMAP_DSS_OUTPUT_DPI | OMAP_DSS_OUTPUT_DBI,
+};
+
 static const enum omap_dss_output_id omap4_dss_supported_outputs[] = {
 	/* OMAP_DSS_CHANNEL_LCD */
 	OMAP_DSS_OUTPUT_DBI | OMAP_DSS_OUTPUT_DSI1,
@@ -444,6 +465,13 @@ static const struct dss_param_range omap3_dss_param_range[] = {
 	[FEAT_PARAM_LINEWIDTH]			= { 1, 1024 },
 };
 
+static const struct dss_param_range am43xx_dss_param_range[] = {
+	[FEAT_PARAM_DSS_FCK]			= { 0, 200000000 },
+	[FEAT_PARAM_DSS_PCD]			= { 2, 255 },
+	[FEAT_PARAM_DOWNSCALE]			= { 1, 4 },
+	[FEAT_PARAM_LINEWIDTH]			= { 1, 1024 },
+};
+
 static const struct dss_param_range omap4_dss_param_range[] = {
 	[FEAT_PARAM_DSS_FCK]			= { 0, 186000000 },
 	[FEAT_PARAM_DSS_PCD]			= { 1, 255 },
@@ -520,6 +548,21 @@ static const enum dss_feat_id am35xx_dss_feat_list[] = {
 	FEAT_OMAP3_DSI_FIFO_BUG,
 };
 
+static const enum dss_feat_id am43xx_dss_feat_list[] = {
+	FEAT_LCDENABLEPOL,
+	FEAT_LCDENABLESIGNAL,
+	FEAT_PCKFREEENABLE,
+	FEAT_FUNCGATED,
+	FEAT_LINEBUFFERSPLIT,
+	FEAT_ROWREPEATENABLE,
+	FEAT_RESIZECONF,
+	FEAT_CPR,
+	FEAT_PRELOAD,
+	FEAT_FIR_COEF_V,
+	FEAT_ALPHA_FIXED_ZORDER,
+	FEAT_FIFO_MERGE,
+};
+
 static const enum dss_feat_id omap3630_dss_feat_list[] = {
 	FEAT_LCDENABLEPOL,
 	FEAT_LCDENABLESIGNAL,
@@ -595,6 +638,7 @@ static const enum dss_feat_id omap4_dss_feat_list[] = {
 
 static const enum dss_feat_id omap5_dss_feat_list[] = {
 	FEAT_MGR_LCD2,
+	FEAT_MGR_LCD3,
 	FEAT_CORE_CLK_DIV,
 	FEAT_LCD_CLK_SRC,
 	FEAT_DSI_DCS_CMD_CONFIG_VC,
@@ -682,6 +726,26 @@ static const struct omap_dss_features am35xx_dss_features = {
 	.burst_size_unit = 8,
 };
 
+static const struct omap_dss_features am43xx_dss_features = {
+	.reg_fields = am43xx_dss_reg_fields,
+	.num_reg_fields = ARRAY_SIZE(am43xx_dss_reg_fields),
+
+	.features = am43xx_dss_feat_list,
+	.num_features = ARRAY_SIZE(am43xx_dss_feat_list),
+
+	.num_mgrs = 1,
+	.num_ovls = 3,
+	.supported_displays = am43xx_dss_supported_displays,
+	.supported_outputs = am43xx_dss_supported_outputs,
+	.supported_color_modes = omap3_dss_supported_color_modes,
+	.overlay_caps = omap3430_dss_overlay_caps,
+	.clksrc_names = omap2_dss_clk_source_names,
+	.dss_params = am43xx_dss_param_range,
+	.supported_rotation_types = OMAP_DSS_ROT_DMA,
+	.buffer_size_unit = 1,
+	.burst_size_unit = 8,
+};
+
 static const struct omap_dss_features omap3630_dss_features = {
 	.reg_fields = omap3_dss_reg_fields,
 	.num_reg_fields = ARRAY_SIZE(omap3_dss_reg_fields),
@@ -777,7 +841,7 @@ static const struct omap_dss_features omap5_dss_features = {
 	.features = omap5_dss_feat_list,
 	.num_features = ARRAY_SIZE(omap5_dss_feat_list),
 
-	.num_mgrs = 3,
+	.num_mgrs = 4,
 	.num_ovls = 4,
 	.supported_displays = omap5_dss_supported_displays,
 	.supported_outputs = omap5_dss_supported_outputs,
@@ -928,6 +992,10 @@ void dss_features_init(enum omapdss_version version)
 		omap_current_dss_features = &am35xx_dss_features;
 		break;
 
+	case OMAPDSS_VER_AM43xx:
+		omap_current_dss_features = &am43xx_dss_features;
+		break;
+
 	default:
 		DSSWARN("Unsupported OMAP version");
 		break;
diff --git a/drivers/video/fbdev/omap2/dss/hdmi.h b/drivers/video/fbdev/omap2/dss/hdmi.h
index e25681ff5a70..fbee07816337 100644
--- a/drivers/video/fbdev/omap2/dss/hdmi.h
+++ b/drivers/video/fbdev/omap2/dss/hdmi.h
@@ -80,6 +80,7 @@
 #define HDMI_TXPHY_DIGITAL_CTRL			0x4
 #define HDMI_TXPHY_POWER_CTRL			0x8
 #define HDMI_TXPHY_PAD_CFG_CTRL			0xC
+#define HDMI_TXPHY_BIST_CONTROL			0x1C
 
 enum hdmi_pll_pwr {
 	HDMI_PLLPWRCMD_ALLOFF = 0,
@@ -351,7 +352,8 @@ struct hdmi_pll_data {
 struct hdmi_phy_data {
 	void __iomem *base;
 
-	int irq;
+	u8 lane_function[4];
+	u8 lane_polarity[4];
 };
 
 struct hdmi_core_data {
@@ -360,13 +362,13 @@ struct hdmi_core_data {
 	struct hdmi_core_infoframe_avi avi_cfg;
 };
 
-static inline void hdmi_write_reg(void __iomem *base_addr, const u16 idx,
+static inline void hdmi_write_reg(void __iomem *base_addr, const u32 idx,
 		u32 val)
 {
 	__raw_writel(val, base_addr + idx);
 }
 
-static inline u32 hdmi_read_reg(void __iomem *base_addr, const u16 idx)
+static inline u32 hdmi_read_reg(void __iomem *base_addr, const u32 idx)
 {
 	return __raw_readl(base_addr + idx);
 }
@@ -417,18 +419,19 @@ void hdmi_pll_compute(struct hdmi_pll_data *pll, unsigned long clkin, int phy);
 int hdmi_pll_init(struct platform_device *pdev, struct hdmi_pll_data *pll);
 
 /* HDMI PHY funcs */
-int hdmi_phy_enable(struct hdmi_phy_data *phy, struct hdmi_wp_data *wp,
-		struct hdmi_config *cfg);
-void hdmi_phy_disable(struct hdmi_phy_data *phy, struct hdmi_wp_data *wp);
+int hdmi_phy_configure(struct hdmi_phy_data *phy, struct hdmi_config *cfg);
 void hdmi_phy_dump(struct hdmi_phy_data *phy, struct seq_file *s);
 int hdmi_phy_init(struct platform_device *pdev, struct hdmi_phy_data *phy);
+int hdmi_phy_parse_lanes(struct hdmi_phy_data *phy, const u32 *lanes);
 
 /* HDMI common funcs */
 const struct hdmi_config *hdmi_default_timing(void);
 const struct hdmi_config *hdmi_get_timings(int mode, int code);
 struct hdmi_cm hdmi_get_code(struct omap_video_timings *timing);
+int hdmi_parse_lanes_of(struct platform_device *pdev, struct device_node *ep,
+	struct hdmi_phy_data *phy);
 
-#if defined(CONFIG_OMAP4_DSS_HDMI_AUDIO)
+#if defined(CONFIG_OMAP4_DSS_HDMI_AUDIO) || defined(CONFIG_OMAP5_DSS_HDMI_AUDIO)
 int hdmi_compute_acr(u32 pclk, u32 sample_freq, u32 *n, u32 *cts);
 int hdmi_wp_audio_enable(struct hdmi_wp_data *wp, bool enable);
 int hdmi_wp_audio_core_req_enable(struct hdmi_wp_data *wp, bool enable);
diff --git a/drivers/video/fbdev/omap2/dss/hdmi4.c b/drivers/video/fbdev/omap2/dss/hdmi4.c
index f5f7944a1fd1..626aad2bef46 100644
--- a/drivers/video/fbdev/omap2/dss/hdmi4.c
+++ b/drivers/video/fbdev/omap2/dss/hdmi4.c
@@ -81,8 +81,40 @@ static void hdmi_runtime_put(void)
 	WARN_ON(r < 0 && r != -ENOSYS);
 }
 
+static irqreturn_t hdmi_irq_handler(int irq, void *data)
+{
+	struct hdmi_wp_data *wp = data;
+	u32 irqstatus;
+
+	irqstatus = hdmi_wp_get_irqstatus(wp);
+	hdmi_wp_set_irqstatus(wp, irqstatus);
+
+	if ((irqstatus & HDMI_IRQ_LINK_CONNECT) &&
+			irqstatus & HDMI_IRQ_LINK_DISCONNECT) {
+		/*
+		 * If we get both connect and disconnect interrupts at the same
+		 * time, turn off the PHY, clear interrupts, and restart, which
+		 * raises connect interrupt if a cable is connected, or nothing
+		 * if cable is not connected.
+		 */
+		hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_OFF);
+
+		hdmi_wp_set_irqstatus(wp, HDMI_IRQ_LINK_CONNECT |
+				HDMI_IRQ_LINK_DISCONNECT);
+
+		hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_LDOON);
+	} else if (irqstatus & HDMI_IRQ_LINK_CONNECT) {
+		hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_TXON);
+	} else if (irqstatus & HDMI_IRQ_LINK_DISCONNECT) {
+		hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_LDOON);
+	}
+
+	return IRQ_HANDLED;
+}
+
 static int hdmi_init_regulator(void)
 {
+	int r;
 	struct regulator *reg;
 
 	if (hdmi.vdda_hdmi_dac_reg != NULL)
@@ -96,6 +128,15 @@ static int hdmi_init_regulator(void)
 		return PTR_ERR(reg);
 	}
 
+	if (regulator_can_change_voltage(reg)) {
+		r = regulator_set_voltage(reg, 1800000, 1800000);
+		if (r) {
+			devm_regulator_put(reg);
+			DSSWARN("can't set the regulator voltage\n");
+			return r;
+		}
+	}
+
 	hdmi.vdda_hdmi_dac_reg = reg;
 
 	return 0;
@@ -140,11 +181,16 @@ static int hdmi_power_on_full(struct omap_dss_device *dssdev)
 	struct omap_video_timings *p;
 	struct omap_overlay_manager *mgr = hdmi.output.manager;
 	unsigned long phy;
+	struct hdmi_wp_data *wp = &hdmi.wp;
 
 	r = hdmi_power_on_core(dssdev);
 	if (r)
 		return r;
 
+	/* disable and clear irqs */
+	hdmi_wp_clear_irqenable(wp, 0xffffffff);
+	hdmi_wp_set_irqstatus(wp, 0xffffffff);
+
 	p = &hdmi.cfg.timings;
 
 	DSSDBG("hdmi_power_on x_res= %d y_res = %d\n", p->x_res, p->y_res);
@@ -161,12 +207,16 @@ static int hdmi_power_on_full(struct omap_dss_device *dssdev)
 		goto err_pll_enable;
 	}
 
-	r = hdmi_phy_enable(&hdmi.phy, &hdmi.wp, &hdmi.cfg);
+	r = hdmi_phy_configure(&hdmi.phy, &hdmi.cfg);
 	if (r) {
-		DSSDBG("Failed to start PHY\n");
-		goto err_phy_enable;
+		DSSDBG("Failed to configure PHY\n");
+		goto err_phy_cfg;
 	}
 
+	r = hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_LDOON);
+	if (r)
+		goto err_phy_pwr;
+
 	hdmi4_configure(&hdmi.core, &hdmi.wp, &hdmi.cfg);
 
 	/* bypass TV gamma table */
@@ -183,13 +233,17 @@ static int hdmi_power_on_full(struct omap_dss_device *dssdev)
 	if (r)
 		goto err_mgr_enable;
 
+	hdmi_wp_set_irqenable(wp,
+		HDMI_IRQ_LINK_CONNECT | HDMI_IRQ_LINK_DISCONNECT);
+
 	return 0;
 
 err_mgr_enable:
 	hdmi_wp_video_stop(&hdmi.wp);
 err_vid_enable:
-	hdmi_phy_disable(&hdmi.phy, &hdmi.wp);
-err_phy_enable:
+err_phy_cfg:
+	hdmi_wp_set_phy_pwr(&hdmi.wp, HDMI_PHYPWRCMD_OFF);
+err_phy_pwr:
 	hdmi_pll_disable(&hdmi.pll, &hdmi.wp);
 err_pll_enable:
 	hdmi_power_off_core(dssdev);
@@ -200,10 +254,14 @@ static void hdmi_power_off_full(struct omap_dss_device *dssdev)
 {
 	struct omap_overlay_manager *mgr = hdmi.output.manager;
 
+	hdmi_wp_clear_irqenable(&hdmi.wp, 0xffffffff);
+
 	dss_mgr_disable(mgr);
 
 	hdmi_wp_video_stop(&hdmi.wp);
-	hdmi_phy_disable(&hdmi.phy, &hdmi.wp);
+
+	hdmi_wp_set_phy_pwr(&hdmi.wp, HDMI_PHYPWRCMD_OFF);
+
 	hdmi_pll_disable(&hdmi.pll, &hdmi.wp);
 
 	hdmi_power_off_core(dssdev);
@@ -600,15 +658,44 @@ static void __exit hdmi_uninit_output(struct platform_device *pdev)
 	omapdss_unregister_output(out);
 }
 
+static int hdmi_probe_of(struct platform_device *pdev)
+{
+	struct device_node *node = pdev->dev.of_node;
+	struct device_node *ep;
+	int r;
+
+	ep = omapdss_of_get_first_endpoint(node);
+	if (!ep)
+		return 0;
+
+	r = hdmi_parse_lanes_of(pdev, ep, &hdmi.phy);
+	if (r)
+		goto err;
+
+	of_node_put(ep);
+	return 0;
+
+err:
+	of_node_put(ep);
+	return r;
+}
+
 /* HDMI HW IP initialisation */
 static int omapdss_hdmihw_probe(struct platform_device *pdev)
 {
 	int r;
+	int irq;
 
 	hdmi.pdev = pdev;
 
 	mutex_init(&hdmi.lock);
 
+	if (pdev->dev.of_node) {
+		r = hdmi_probe_of(pdev);
+		if (r)
+			return r;
+	}
+
 	r = hdmi_wp_init(pdev, &hdmi.wp);
 	if (r)
 		return r;
@@ -631,6 +718,20 @@ static int omapdss_hdmihw_probe(struct platform_device *pdev)
 		return r;
 	}
 
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		DSSERR("platform_get_irq failed\n");
+		return -ENODEV;
+	}
+
+	r = devm_request_threaded_irq(&pdev->dev, irq,
+			NULL, hdmi_irq_handler,
+			IRQF_ONESHOT, "OMAP HDMI", &hdmi.wp);
+	if (r) {
+		DSSERR("HDMI IRQ request failed\n");
+		return r;
+	}
+
 	pm_runtime_enable(&pdev->dev);
 
 	hdmi_init_output(pdev);
diff --git a/drivers/video/fbdev/omap2/dss/hdmi4_core.c b/drivers/video/fbdev/omap2/dss/hdmi4_core.c
index 2eb04dcf807c..8bde7b7e95ff 100644
--- a/drivers/video/fbdev/omap2/dss/hdmi4_core.c
+++ b/drivers/video/fbdev/omap2/dss/hdmi4_core.c
@@ -998,38 +998,20 @@ int hdmi4_audio_get_dma_port(u32 *offset, u32 *size)
 
 #endif
 
-#define CORE_OFFSET		0x400
-#define CORE_SIZE		0xc00
-
 int hdmi4_core_init(struct platform_device *pdev, struct hdmi_core_data *core)
 {
 	struct resource *res;
-	struct resource temp_res;
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "core");
 	if (!res) {
-		DSSDBG("can't get CORE mem resource by name\n");
-		/*
-		 * if hwmod/DT doesn't have the memory resource information
-		 * split into HDMI sub blocks by name, we try again by getting
-		 * the platform's first resource. this code will be removed when
-		 * the driver can get the mem resources by name
-		 */
-		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-		if (!res) {
-			DSSERR("can't get CORE mem resource\n");
-			return -EINVAL;
-		}
-
-		temp_res.start = res->start + CORE_OFFSET;
-		temp_res.end = temp_res.start + CORE_SIZE - 1;
-		res = &temp_res;
+		DSSERR("can't get CORE mem resource\n");
+		return -EINVAL;
 	}
 
-	core->base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
-	if (!core->base) {
+	core->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(core->base)) {
 		DSSERR("can't ioremap CORE\n");
-		return -ENOMEM;
+		return PTR_ERR(core->base);
 	}
 
 	return 0;
diff --git a/drivers/video/fbdev/omap2/dss/hdmi5.c b/drivers/video/fbdev/omap2/dss/hdmi5.c
new file mode 100644
index 000000000000..c468b9e1f295
--- /dev/null
+++ b/drivers/video/fbdev/omap2/dss/hdmi5.c
@@ -0,0 +1,829 @@
+/*
+ * HDMI driver for OMAP5
+ *
+ * Copyright (C) 2014 Texas Instruments Incorporated
+ *
+ * Authors:
+ *	Yong Zhi
+ *	Mythri pk
+ *	Archit Taneja <archit@ti.com>
+ *	Tomi Valkeinen <tomi.valkeinen@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define DSS_SUBSYS_NAME "HDMI"
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/regulator/consumer.h>
+#include <video/omapdss.h>
+
+#include "hdmi5_core.h"
+#include "dss.h"
+#include "dss_features.h"
+
+static struct {
+	struct mutex lock;
+	struct platform_device *pdev;
+
+	struct hdmi_wp_data	wp;
+	struct hdmi_pll_data	pll;
+	struct hdmi_phy_data	phy;
+	struct hdmi_core_data	core;
+
+	struct hdmi_config cfg;
+
+	struct clk *sys_clk;
+	struct regulator *vdda_reg;
+
+	bool core_enabled;
+
+	struct omap_dss_device output;
+} hdmi;
+
+static int hdmi_runtime_get(void)
+{
+	int r;
+
+	DSSDBG("hdmi_runtime_get\n");
+
+	r = pm_runtime_get_sync(&hdmi.pdev->dev);
+	WARN_ON(r < 0);
+	if (r < 0)
+		return r;
+
+	return 0;
+}
+
+static void hdmi_runtime_put(void)
+{
+	int r;
+
+	DSSDBG("hdmi_runtime_put\n");
+
+	r = pm_runtime_put_sync(&hdmi.pdev->dev);
+	WARN_ON(r < 0 && r != -ENOSYS);
+}
+
+static irqreturn_t hdmi_irq_handler(int irq, void *data)
+{
+	struct hdmi_wp_data *wp = data;
+	u32 irqstatus;
+
+	irqstatus = hdmi_wp_get_irqstatus(wp);
+	hdmi_wp_set_irqstatus(wp, irqstatus);
+
+	if ((irqstatus & HDMI_IRQ_LINK_CONNECT) &&
+			irqstatus & HDMI_IRQ_LINK_DISCONNECT) {
+		u32 v;
+		/*
+		 * If we get both connect and disconnect interrupts at the same
+		 * time, turn off the PHY, clear interrupts, and restart, which
+		 * raises connect interrupt if a cable is connected, or nothing
+		 * if cable is not connected.
+		 */
+
+		hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_OFF);
+
+		/*
+		 * We always get bogus CONNECT & DISCONNECT interrupts when
+		 * setting the PHY to LDOON. To ignore those, we force the RXDET
+		 * line to 0 until the PHY power state has been changed.
+		 */
+		v = hdmi_read_reg(hdmi.phy.base, HDMI_TXPHY_PAD_CFG_CTRL);
+		v = FLD_MOD(v, 1, 15, 15); /* FORCE_RXDET_HIGH */
+		v = FLD_MOD(v, 0, 14, 7); /* RXDET_LINE */
+		hdmi_write_reg(hdmi.phy.base, HDMI_TXPHY_PAD_CFG_CTRL, v);
+
+		hdmi_wp_set_irqstatus(wp, HDMI_IRQ_LINK_CONNECT |
+				HDMI_IRQ_LINK_DISCONNECT);
+
+		hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_LDOON);
+
+		REG_FLD_MOD(hdmi.phy.base, HDMI_TXPHY_PAD_CFG_CTRL, 0, 15, 15);
+
+	} else if (irqstatus & HDMI_IRQ_LINK_CONNECT) {
+		hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_TXON);
+	} else if (irqstatus & HDMI_IRQ_LINK_DISCONNECT) {
+		hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_LDOON);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int hdmi_init_regulator(void)
+{
+	int r;
+	struct regulator *reg;
+
+	if (hdmi.vdda_reg != NULL)
+		return 0;
+
+	reg = devm_regulator_get(&hdmi.pdev->dev, "vdda");
+	if (IS_ERR(reg)) {
+		DSSERR("can't get VDDA regulator\n");
+		return PTR_ERR(reg);
+	}
+
+	if (regulator_can_change_voltage(reg)) {
+		r = regulator_set_voltage(reg, 1800000, 1800000);
+		if (r) {
+			devm_regulator_put(reg);
+			DSSWARN("can't set the regulator voltage\n");
+			return r;
+		}
+	}
+
+	hdmi.vdda_reg = reg;
+
+	return 0;
+}
+
+static int hdmi_power_on_core(struct omap_dss_device *dssdev)
+{
+	int r;
+
+	r = regulator_enable(hdmi.vdda_reg);
+	if (r)
+		return r;
+
+	r = hdmi_runtime_get();
+	if (r)
+		goto err_runtime_get;
+
+	/* Make selection of HDMI in DSS */
+	dss_select_hdmi_venc_clk_source(DSS_HDMI_M_PCLK);
+
+	hdmi.core_enabled = true;
+
+	return 0;
+
+err_runtime_get:
+	regulator_disable(hdmi.vdda_reg);
+
+	return r;
+}
+
+static void hdmi_power_off_core(struct omap_dss_device *dssdev)
+{
+	hdmi.core_enabled = false;
+
+	hdmi_runtime_put();
+	regulator_disable(hdmi.vdda_reg);
+}
+
+static int hdmi_power_on_full(struct omap_dss_device *dssdev)
+{
+	int r;
+	struct omap_video_timings *p;
+	struct omap_overlay_manager *mgr = hdmi.output.manager;
+	unsigned long phy;
+
+	r = hdmi_power_on_core(dssdev);
+	if (r)
+		return r;
+
+	p = &hdmi.cfg.timings;
+
+	DSSDBG("hdmi_power_on x_res= %d y_res = %d\n", p->x_res, p->y_res);
+
+	/* the functions below use kHz pixel clock. TODO: change to Hz */
+	phy = p->pixelclock / 1000;
+
+	hdmi_pll_compute(&hdmi.pll, clk_get_rate(hdmi.sys_clk), phy);
+
+	/* disable and clear irqs */
+	hdmi_wp_clear_irqenable(&hdmi.wp, 0xffffffff);
+	hdmi_wp_set_irqstatus(&hdmi.wp,
+			hdmi_wp_get_irqstatus(&hdmi.wp));
+
+	/* config the PLL and PHY hdmi_set_pll_pwrfirst */
+	r = hdmi_pll_enable(&hdmi.pll, &hdmi.wp);
+	if (r) {
+		DSSDBG("Failed to lock PLL\n");
+		goto err_pll_enable;
+	}
+
+	r = hdmi_phy_configure(&hdmi.phy, &hdmi.cfg);
+	if (r) {
+		DSSDBG("Failed to start PHY\n");
+		goto err_phy_cfg;
+	}
+
+	r = hdmi_wp_set_phy_pwr(&hdmi.wp, HDMI_PHYPWRCMD_LDOON);
+	if (r)
+		goto err_phy_pwr;
+
+	hdmi5_configure(&hdmi.core, &hdmi.wp, &hdmi.cfg);
+
+	/* bypass TV gamma table */
+	dispc_enable_gamma_table(0);
+
+	/* tv size */
+	dss_mgr_set_timings(mgr, p);
+
+	r = hdmi_wp_video_start(&hdmi.wp);
+	if (r)
+		goto err_vid_enable;
+
+	r = dss_mgr_enable(mgr);
+	if (r)
+		goto err_mgr_enable;
+
+	hdmi_wp_set_irqenable(&hdmi.wp,
+			HDMI_IRQ_LINK_CONNECT | HDMI_IRQ_LINK_DISCONNECT);
+
+	return 0;
+
+err_mgr_enable:
+	hdmi_wp_video_stop(&hdmi.wp);
+err_vid_enable:
+	hdmi_wp_set_phy_pwr(&hdmi.wp, HDMI_PHYPWRCMD_OFF);
+err_phy_pwr:
+err_phy_cfg:
+	hdmi_pll_disable(&hdmi.pll, &hdmi.wp);
+err_pll_enable:
+	hdmi_power_off_core(dssdev);
+	return -EIO;
+}
+
+static void hdmi_power_off_full(struct omap_dss_device *dssdev)
+{
+	struct omap_overlay_manager *mgr = hdmi.output.manager;
+
+	hdmi_wp_clear_irqenable(&hdmi.wp, 0xffffffff);
+
+	dss_mgr_disable(mgr);
+
+	hdmi_wp_video_stop(&hdmi.wp);
+
+	hdmi_wp_set_phy_pwr(&hdmi.wp, HDMI_PHYPWRCMD_OFF);
+
+	hdmi_pll_disable(&hdmi.pll, &hdmi.wp);
+
+	hdmi_power_off_core(dssdev);
+}
+
+static int hdmi_display_check_timing(struct omap_dss_device *dssdev,
+					struct omap_video_timings *timings)
+{
+	struct omap_dss_device *out = &hdmi.output;
+
+	if (!dispc_mgr_timings_ok(out->dispc_channel, timings))
+		return -EINVAL;
+
+	return 0;
+}
+
+static void hdmi_display_set_timing(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct hdmi_cm cm;
+	const struct hdmi_config *t;
+
+	mutex_lock(&hdmi.lock);
+
+	cm = hdmi_get_code(timings);
+	hdmi.cfg.cm = cm;
+
+	t = hdmi_get_timings(cm.mode, cm.code);
+	if (t != NULL) {
+		hdmi.cfg = *t;
+
+		dispc_set_tv_pclk(t->timings.pixelclock);
+	} else {
+		hdmi.cfg.timings = *timings;
+		hdmi.cfg.cm.code = 0;
+		hdmi.cfg.cm.mode = HDMI_DVI;
+
+		dispc_set_tv_pclk(timings->pixelclock);
+	}
+
+	DSSDBG("using mode: %s, code %d\n", hdmi.cfg.cm.mode == HDMI_DVI ?
+			"DVI" : "HDMI", hdmi.cfg.cm.code);
+
+	mutex_unlock(&hdmi.lock);
+}
+
+static void hdmi_display_get_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	const struct hdmi_config *cfg;
+	struct hdmi_cm cm = hdmi.cfg.cm;
+
+	cfg = hdmi_get_timings(cm.mode, cm.code);
+	if (cfg == NULL)
+		cfg = hdmi_default_timing();
+
+	memcpy(timings, &cfg->timings, sizeof(cfg->timings));
+}
+
+static void hdmi_dump_regs(struct seq_file *s)
+{
+	mutex_lock(&hdmi.lock);
+
+	if (hdmi_runtime_get()) {
+		mutex_unlock(&hdmi.lock);
+		return;
+	}
+
+	hdmi_wp_dump(&hdmi.wp, s);
+	hdmi_pll_dump(&hdmi.pll, s);
+	hdmi_phy_dump(&hdmi.phy, s);
+	hdmi5_core_dump(&hdmi.core, s);
+
+	hdmi_runtime_put();
+	mutex_unlock(&hdmi.lock);
+}
+
+static int read_edid(u8 *buf, int len)
+{
+	int r;
+	int idlemode;
+
+	mutex_lock(&hdmi.lock);
+
+	r = hdmi_runtime_get();
+	BUG_ON(r);
+
+	idlemode = REG_GET(hdmi.wp.base, HDMI_WP_SYSCONFIG, 3, 2);
+	/* No-idle mode */
+	REG_FLD_MOD(hdmi.wp.base, HDMI_WP_SYSCONFIG, 1, 3, 2);
+
+	r = hdmi5_read_edid(&hdmi.core,  buf, len);
+
+	REG_FLD_MOD(hdmi.wp.base, HDMI_WP_SYSCONFIG, idlemode, 3, 2);
+
+	hdmi_runtime_put();
+	mutex_unlock(&hdmi.lock);
+
+	return r;
+}
+
+static int hdmi_display_enable(struct omap_dss_device *dssdev)
+{
+	struct omap_dss_device *out = &hdmi.output;
+	int r = 0;
+
+	DSSDBG("ENTER hdmi_display_enable\n");
+
+	mutex_lock(&hdmi.lock);
+
+	if (out == NULL || out->manager == NULL) {
+		DSSERR("failed to enable display: no output/manager\n");
+		r = -ENODEV;
+		goto err0;
+	}
+
+	r = hdmi_power_on_full(dssdev);
+	if (r) {
+		DSSERR("failed to power on device\n");
+		goto err0;
+	}
+
+	mutex_unlock(&hdmi.lock);
+	return 0;
+
+err0:
+	mutex_unlock(&hdmi.lock);
+	return r;
+}
+
+static void hdmi_display_disable(struct omap_dss_device *dssdev)
+{
+	DSSDBG("Enter hdmi_display_disable\n");
+
+	mutex_lock(&hdmi.lock);
+
+	hdmi_power_off_full(dssdev);
+
+	mutex_unlock(&hdmi.lock);
+}
+
+static int hdmi_core_enable(struct omap_dss_device *dssdev)
+{
+	int r = 0;
+
+	DSSDBG("ENTER omapdss_hdmi_core_enable\n");
+
+	mutex_lock(&hdmi.lock);
+
+	r = hdmi_power_on_core(dssdev);
+	if (r) {
+		DSSERR("failed to power on device\n");
+		goto err0;
+	}
+
+	mutex_unlock(&hdmi.lock);
+	return 0;
+
+err0:
+	mutex_unlock(&hdmi.lock);
+	return r;
+}
+
+static void hdmi_core_disable(struct omap_dss_device *dssdev)
+{
+	DSSDBG("Enter omapdss_hdmi_core_disable\n");
+
+	mutex_lock(&hdmi.lock);
+
+	hdmi_power_off_core(dssdev);
+
+	mutex_unlock(&hdmi.lock);
+}
+
+static int hdmi_get_clocks(struct platform_device *pdev)
+{
+	struct clk *clk;
+
+	clk = devm_clk_get(&pdev->dev, "sys_clk");
+	if (IS_ERR(clk)) {
+		DSSERR("can't get sys_clk\n");
+		return PTR_ERR(clk);
+	}
+
+	hdmi.sys_clk = clk;
+
+	return 0;
+}
+
+static int hdmi_connect(struct omap_dss_device *dssdev,
+		struct omap_dss_device *dst)
+{
+	struct omap_overlay_manager *mgr;
+	int r;
+
+	r = hdmi_init_regulator();
+	if (r)
+		return r;
+
+	mgr = omap_dss_get_overlay_manager(dssdev->dispc_channel);
+	if (!mgr)
+		return -ENODEV;
+
+	r = dss_mgr_connect(mgr, dssdev);
+	if (r)
+		return r;
+
+	r = omapdss_output_set_device(dssdev, dst);
+	if (r) {
+		DSSERR("failed to connect output to new device: %s\n",
+				dst->name);
+		dss_mgr_disconnect(mgr, dssdev);
+		return r;
+	}
+
+	return 0;
+}
+
+static void hdmi_disconnect(struct omap_dss_device *dssdev,
+		struct omap_dss_device *dst)
+{
+	WARN_ON(dst != dssdev->dst);
+
+	if (dst != dssdev->dst)
+		return;
+
+	omapdss_output_unset_device(dssdev);
+
+	if (dssdev->manager)
+		dss_mgr_disconnect(dssdev->manager, dssdev);
+}
+
+static int hdmi_read_edid(struct omap_dss_device *dssdev,
+		u8 *edid, int len)
+{
+	bool need_enable;
+	int r;
+
+	need_enable = hdmi.core_enabled == false;
+
+	if (need_enable) {
+		r = hdmi_core_enable(dssdev);
+		if (r)
+			return r;
+	}
+
+	r = read_edid(edid, len);
+
+	if (need_enable)
+		hdmi_core_disable(dssdev);
+
+	return r;
+}
+
+#if defined(CONFIG_OMAP5_DSS_HDMI_AUDIO)
+static int hdmi_audio_enable(struct omap_dss_device *dssdev)
+{
+	int r;
+
+	mutex_lock(&hdmi.lock);
+
+	if (!hdmi_mode_has_audio(hdmi.cfg.cm.mode)) {
+		r = -EPERM;
+		goto err;
+	}
+
+	r = hdmi_wp_audio_enable(&hdmi.wp, true);
+	if (r)
+		goto err;
+
+	mutex_unlock(&hdmi.lock);
+	return 0;
+
+err:
+	mutex_unlock(&hdmi.lock);
+	return r;
+}
+
+static void hdmi_audio_disable(struct omap_dss_device *dssdev)
+{
+	hdmi_wp_audio_enable(&hdmi.wp, false);
+}
+
+static int hdmi_audio_start(struct omap_dss_device *dssdev)
+{
+	return hdmi_wp_audio_core_req_enable(&hdmi.wp, true);
+}
+
+static void hdmi_audio_stop(struct omap_dss_device *dssdev)
+{
+	hdmi_wp_audio_core_req_enable(&hdmi.wp, false);
+}
+
+static bool hdmi_audio_supported(struct omap_dss_device *dssdev)
+{
+	bool r;
+
+	mutex_lock(&hdmi.lock);
+
+	r = hdmi_mode_has_audio(hdmi.cfg.cm.mode);
+
+	mutex_unlock(&hdmi.lock);
+	return r;
+}
+
+static int hdmi_audio_config(struct omap_dss_device *dssdev,
+		struct omap_dss_audio *audio)
+{
+	int r;
+	u32 pclk = hdmi.cfg.timings.pixelclock;
+
+	mutex_lock(&hdmi.lock);
+
+	if (!hdmi_mode_has_audio(hdmi.cfg.cm.mode)) {
+		r = -EPERM;
+		goto err;
+	}
+
+	r = hdmi5_audio_config(&hdmi.core, &hdmi.wp, audio, pclk);
+	if (r)
+		goto err;
+
+	mutex_unlock(&hdmi.lock);
+	return 0;
+
+err:
+	mutex_unlock(&hdmi.lock);
+	return r;
+}
+#else
+static int hdmi_audio_enable(struct omap_dss_device *dssdev)
+{
+	return -EPERM;
+}
+
+static void hdmi_audio_disable(struct omap_dss_device *dssdev)
+{
+}
+
+static int hdmi_audio_start(struct omap_dss_device *dssdev)
+{
+	return -EPERM;
+}
+
+static void hdmi_audio_stop(struct omap_dss_device *dssdev)
+{
+}
+
+static bool hdmi_audio_supported(struct omap_dss_device *dssdev)
+{
+	return false;
+}
+
+static int hdmi_audio_config(struct omap_dss_device *dssdev,
+		struct omap_dss_audio *audio)
+{
+	return -EPERM;
+}
+#endif
+
+static const struct omapdss_hdmi_ops hdmi_ops = {
+	.connect		= hdmi_connect,
+	.disconnect		= hdmi_disconnect,
+
+	.enable			= hdmi_display_enable,
+	.disable		= hdmi_display_disable,
+
+	.check_timings		= hdmi_display_check_timing,
+	.set_timings		= hdmi_display_set_timing,
+	.get_timings		= hdmi_display_get_timings,
+
+	.read_edid		= hdmi_read_edid,
+
+	.audio_enable		= hdmi_audio_enable,
+	.audio_disable		= hdmi_audio_disable,
+	.audio_start		= hdmi_audio_start,
+	.audio_stop		= hdmi_audio_stop,
+	.audio_supported	= hdmi_audio_supported,
+	.audio_config		= hdmi_audio_config,
+};
+
+static void hdmi_init_output(struct platform_device *pdev)
+{
+	struct omap_dss_device *out = &hdmi.output;
+
+	out->dev = &pdev->dev;
+	out->id = OMAP_DSS_OUTPUT_HDMI;
+	out->output_type = OMAP_DISPLAY_TYPE_HDMI;
+	out->name = "hdmi.0";
+	out->dispc_channel = OMAP_DSS_CHANNEL_DIGIT;
+	out->ops.hdmi = &hdmi_ops;
+	out->owner = THIS_MODULE;
+
+	omapdss_register_output(out);
+}
+
+static void __exit hdmi_uninit_output(struct platform_device *pdev)
+{
+	struct omap_dss_device *out = &hdmi.output;
+
+	omapdss_unregister_output(out);
+}
+
+static int hdmi_probe_of(struct platform_device *pdev)
+{
+	struct device_node *node = pdev->dev.of_node;
+	struct device_node *ep;
+	int r;
+
+	ep = omapdss_of_get_first_endpoint(node);
+	if (!ep)
+		return 0;
+
+	r = hdmi_parse_lanes_of(pdev, ep, &hdmi.phy);
+	if (r)
+		goto err;
+
+	of_node_put(ep);
+	return 0;
+
+err:
+	of_node_put(ep);
+	return r;
+}
+
+/* HDMI HW IP initialisation */
+static int omapdss_hdmihw_probe(struct platform_device *pdev)
+{
+	int r;
+	int irq;
+
+	hdmi.pdev = pdev;
+
+	mutex_init(&hdmi.lock);
+
+	if (pdev->dev.of_node) {
+		r = hdmi_probe_of(pdev);
+		if (r)
+			return r;
+	}
+
+	r = hdmi_wp_init(pdev, &hdmi.wp);
+	if (r)
+		return r;
+
+	r = hdmi_pll_init(pdev, &hdmi.pll);
+	if (r)
+		return r;
+
+	r = hdmi_phy_init(pdev, &hdmi.phy);
+	if (r)
+		return r;
+
+	r = hdmi5_core_init(pdev, &hdmi.core);
+	if (r)
+		return r;
+
+	r = hdmi_get_clocks(pdev);
+	if (r) {
+		DSSERR("can't get clocks\n");
+		return r;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		DSSERR("platform_get_irq failed\n");
+		return -ENODEV;
+	}
+
+	r = devm_request_threaded_irq(&pdev->dev, irq,
+			NULL, hdmi_irq_handler,
+			IRQF_ONESHOT, "OMAP HDMI", &hdmi.wp);
+	if (r) {
+		DSSERR("HDMI IRQ request failed\n");
+		return r;
+	}
+
+	pm_runtime_enable(&pdev->dev);
+
+	hdmi_init_output(pdev);
+
+	dss_debugfs_create_file("hdmi", hdmi_dump_regs);
+
+	return 0;
+}
+
+static int __exit omapdss_hdmihw_remove(struct platform_device *pdev)
+{
+	hdmi_uninit_output(pdev);
+
+	pm_runtime_disable(&pdev->dev);
+
+	return 0;
+}
+
+static int hdmi_runtime_suspend(struct device *dev)
+{
+	clk_disable_unprepare(hdmi.sys_clk);
+
+	dispc_runtime_put();
+
+	return 0;
+}
+
+static int hdmi_runtime_resume(struct device *dev)
+{
+	int r;
+
+	r = dispc_runtime_get();
+	if (r < 0)
+		return r;
+
+	clk_prepare_enable(hdmi.sys_clk);
+
+	return 0;
+}
+
+static const struct dev_pm_ops hdmi_pm_ops = {
+	.runtime_suspend = hdmi_runtime_suspend,
+	.runtime_resume = hdmi_runtime_resume,
+};
+
+static const struct of_device_id hdmi_of_match[] = {
+	{ .compatible = "ti,omap5-hdmi", },
+	{},
+};
+
+static struct platform_driver omapdss_hdmihw_driver = {
+	.probe		= omapdss_hdmihw_probe,
+	.remove         = __exit_p(omapdss_hdmihw_remove),
+	.driver         = {
+		.name   = "omapdss_hdmi5",
+		.owner  = THIS_MODULE,
+		.pm	= &hdmi_pm_ops,
+		.of_match_table = hdmi_of_match,
+	},
+};
+
+int __init hdmi5_init_platform_driver(void)
+{
+	return platform_driver_register(&omapdss_hdmihw_driver);
+}
+
+void __exit hdmi5_uninit_platform_driver(void)
+{
+	platform_driver_unregister(&omapdss_hdmihw_driver);
+}
diff --git a/drivers/video/fbdev/omap2/dss/hdmi5_core.c b/drivers/video/fbdev/omap2/dss/hdmi5_core.c
new file mode 100644
index 000000000000..7528c7a42aa5
--- /dev/null
+++ b/drivers/video/fbdev/omap2/dss/hdmi5_core.c
@@ -0,0 +1,922 @@
+/*
+ * OMAP5 HDMI CORE IP driver library
+ *
+ * Copyright (C) 2014 Texas Instruments Incorporated
+ *
+ * Authors:
+ *	Yong Zhi
+ *	Mythri pk
+ *	Archit Taneja <archit@ti.com>
+ *	Tomi Valkeinen <tomi.valkeinen@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/seq_file.h>
+#include <drm/drm_edid.h>
+#if defined(CONFIG_OMAP5_DSS_HDMI_AUDIO)
+#include <sound/asound.h>
+#include <sound/asoundef.h>
+#endif
+
+#include "hdmi5_core.h"
+
+/* only 24 bit color depth used for now */
+static const struct csc_table csc_table_deepcolor[] = {
+	/* HDMI_DEEP_COLOR_24BIT */
+	[0] = { 7036, 0, 0, 32, 0, 7036, 0, 32, 0, 0, 7036, 32, },
+	/* HDMI_DEEP_COLOR_30BIT */
+	[1] = { 7015, 0, 0, 128, 0, 7015, 0, 128, 0, 0, 7015, 128, },
+	/* HDMI_DEEP_COLOR_36BIT */
+	[2] = { 7010, 0, 0, 512, 0, 7010, 0, 512, 0, 0, 7010, 512, },
+	/* FULL RANGE */
+	[3] = { 8192, 0, 0, 0, 0, 8192, 0, 0, 0, 0, 8192, 0, },
+};
+
+static void hdmi_core_ddc_init(struct hdmi_core_data *core)
+{
+	void __iomem *base = core->base;
+	const unsigned long long iclk = 266000000;	/* DSS L3 ICLK */
+	const unsigned ss_scl_high = 4000;		/* ns */
+	const unsigned ss_scl_low = 4700;		/* ns */
+	const unsigned fs_scl_high = 600;		/* ns */
+	const unsigned fs_scl_low = 1300;		/* ns */
+	const unsigned sda_hold = 300;			/* ns */
+	const unsigned sfr_div = 10;
+	unsigned long long sfr;
+	unsigned v;
+
+	sfr = iclk / sfr_div;	/* SFR_DIV */
+	sfr /= 1000;		/* SFR clock in kHz */
+
+	/* Reset */
+	REG_FLD_MOD(base, HDMI_CORE_I2CM_SOFTRSTZ, 0, 0, 0);
+	if (hdmi_wait_for_bit_change(base, HDMI_CORE_I2CM_SOFTRSTZ,
+				0, 0, 1) != 1)
+		DSSERR("HDMI I2CM reset failed\n");
+
+	/* Standard (0) or Fast (1) Mode */
+	REG_FLD_MOD(base, HDMI_CORE_I2CM_DIV, 0, 3, 3);
+
+	/* Standard Mode SCL High counter */
+	v = DIV_ROUND_UP_ULL(ss_scl_high * sfr, 1000000);
+	REG_FLD_MOD(base, HDMI_CORE_I2CM_SS_SCL_HCNT_1_ADDR,
+			(v >> 8) & 0xff, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_I2CM_SS_SCL_HCNT_0_ADDR,
+			v & 0xff, 7, 0);
+
+	/* Standard Mode SCL Low counter */
+	v = DIV_ROUND_UP_ULL(ss_scl_low * sfr, 1000000);
+	REG_FLD_MOD(base, HDMI_CORE_I2CM_SS_SCL_LCNT_1_ADDR,
+			(v >> 8) & 0xff, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_I2CM_SS_SCL_LCNT_0_ADDR,
+			v & 0xff, 7, 0);
+
+	/* Fast Mode SCL High Counter */
+	v = DIV_ROUND_UP_ULL(fs_scl_high * sfr, 1000000);
+	REG_FLD_MOD(base, HDMI_CORE_I2CM_FS_SCL_HCNT_1_ADDR,
+			(v >> 8) & 0xff, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_I2CM_FS_SCL_HCNT_0_ADDR,
+			v & 0xff, 7, 0);
+
+	/* Fast Mode SCL Low Counter */
+	v = DIV_ROUND_UP_ULL(fs_scl_low * sfr, 1000000);
+	REG_FLD_MOD(base, HDMI_CORE_I2CM_FS_SCL_LCNT_1_ADDR,
+			(v >> 8) & 0xff, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_I2CM_FS_SCL_LCNT_0_ADDR,
+			v & 0xff, 7, 0);
+
+	/* SDA Hold Time */
+	v = DIV_ROUND_UP_ULL(sda_hold * sfr, 1000000);
+	REG_FLD_MOD(base, HDMI_CORE_I2CM_SDA_HOLD_ADDR, v & 0xff, 7, 0);
+
+	REG_FLD_MOD(base, HDMI_CORE_I2CM_SLAVE, 0x50, 6, 0);
+	REG_FLD_MOD(base, HDMI_CORE_I2CM_SEGADDR, 0x30, 6, 0);
+
+	/* NACK_POL to high */
+	REG_FLD_MOD(base, HDMI_CORE_I2CM_CTLINT, 0x1, 7, 7);
+
+	/* NACK_MASK to unmasked */
+	REG_FLD_MOD(base, HDMI_CORE_I2CM_CTLINT, 0x0, 6, 6);
+
+	/* ARBITRATION_POL to high */
+	REG_FLD_MOD(base, HDMI_CORE_I2CM_CTLINT, 0x1, 3, 3);
+
+	/* ARBITRATION_MASK to unmasked */
+	REG_FLD_MOD(base, HDMI_CORE_I2CM_CTLINT, 0x0, 2, 2);
+
+	/* DONE_POL to high */
+	REG_FLD_MOD(base, HDMI_CORE_I2CM_INT, 0x1, 3, 3);
+
+	/* DONE_MASK to unmasked */
+	REG_FLD_MOD(base, HDMI_CORE_I2CM_INT, 0x0, 2, 2);
+}
+
+static void hdmi_core_ddc_uninit(struct hdmi_core_data *core)
+{
+	void __iomem *base = core->base;
+
+	/* Mask I2C interrupts */
+	REG_FLD_MOD(base, HDMI_CORE_I2CM_CTLINT, 0x1, 6, 6);
+	REG_FLD_MOD(base, HDMI_CORE_I2CM_CTLINT, 0x1, 2, 2);
+	REG_FLD_MOD(base, HDMI_CORE_I2CM_INT, 0x1, 2, 2);
+}
+
+static int hdmi_core_ddc_edid(struct hdmi_core_data *core, u8 *pedid, u8 ext)
+{
+	void __iomem *base = core->base;
+	u8 cur_addr;
+	char checksum = 0;
+	const int retries = 1000;
+	u8 seg_ptr = ext / 2;
+	u8 edidbase = ((ext % 2) * 0x80);
+
+	REG_FLD_MOD(base, HDMI_CORE_I2CM_SEGPTR, seg_ptr, 7, 0);
+
+	/*
+	 * TODO: We use polling here, although we probably should use proper
+	 * interrupts.
+	 */
+	for (cur_addr = 0; cur_addr < 128; ++cur_addr) {
+		int i;
+
+		/* clear ERROR and DONE */
+		REG_FLD_MOD(base, HDMI_CORE_IH_I2CM_STAT0, 0x3, 1, 0);
+
+		REG_FLD_MOD(base, HDMI_CORE_I2CM_ADDRESS,
+				edidbase + cur_addr, 7, 0);
+
+		if (seg_ptr)
+			REG_FLD_MOD(base, HDMI_CORE_I2CM_OPERATION, 1, 1, 1);
+		else
+			REG_FLD_MOD(base, HDMI_CORE_I2CM_OPERATION, 1, 0, 0);
+
+		for (i = 0; i < retries; ++i) {
+			u32 stat;
+
+			stat = REG_GET(base, HDMI_CORE_IH_I2CM_STAT0, 1, 0);
+
+			/* I2CM_ERROR */
+			if (stat & 1) {
+				DSSERR("HDMI I2C Master Error\n");
+				return -EIO;
+			}
+
+			/* I2CM_DONE */
+			if (stat & (1 << 1))
+				break;
+
+			usleep_range(250, 1000);
+		}
+
+		if (i == retries) {
+			DSSERR("HDMI I2C timeout reading EDID\n");
+			return -EIO;
+		}
+
+		pedid[cur_addr] = REG_GET(base, HDMI_CORE_I2CM_DATAI, 7, 0);
+		checksum += pedid[cur_addr];
+	}
+
+	return 0;
+
+}
+
+int hdmi5_read_edid(struct hdmi_core_data *core, u8 *edid, int len)
+{
+	int r, n, i;
+	int max_ext_blocks = (len / 128) - 1;
+
+	if (len < 128)
+		return -EINVAL;
+
+	hdmi_core_ddc_init(core);
+
+	r = hdmi_core_ddc_edid(core, edid, 0);
+	if (r)
+		goto out;
+
+	n = edid[0x7e];
+
+	if (n > max_ext_blocks)
+		n = max_ext_blocks;
+
+	for (i = 1; i <= n; i++) {
+		r = hdmi_core_ddc_edid(core, edid + i * EDID_LENGTH, i);
+		if (r)
+			goto out;
+	}
+
+out:
+	hdmi_core_ddc_uninit(core);
+
+	return r ? r : len;
+}
+
+void hdmi5_core_dump(struct hdmi_core_data *core, struct seq_file *s)
+{
+
+#define DUMPCORE(r) seq_printf(s, "%-35s %08x\n", #r,\
+		hdmi_read_reg(core->base, r))
+
+	DUMPCORE(HDMI_CORE_FC_INVIDCONF);
+	DUMPCORE(HDMI_CORE_FC_INHACTIV0);
+	DUMPCORE(HDMI_CORE_FC_INHACTIV1);
+	DUMPCORE(HDMI_CORE_FC_INHBLANK0);
+	DUMPCORE(HDMI_CORE_FC_INHBLANK1);
+	DUMPCORE(HDMI_CORE_FC_INVACTIV0);
+	DUMPCORE(HDMI_CORE_FC_INVACTIV1);
+	DUMPCORE(HDMI_CORE_FC_INVBLANK);
+	DUMPCORE(HDMI_CORE_FC_HSYNCINDELAY0);
+	DUMPCORE(HDMI_CORE_FC_HSYNCINDELAY1);
+	DUMPCORE(HDMI_CORE_FC_HSYNCINWIDTH0);
+	DUMPCORE(HDMI_CORE_FC_HSYNCINWIDTH1);
+	DUMPCORE(HDMI_CORE_FC_VSYNCINDELAY);
+	DUMPCORE(HDMI_CORE_FC_VSYNCINWIDTH);
+	DUMPCORE(HDMI_CORE_FC_CTRLDUR);
+	DUMPCORE(HDMI_CORE_FC_EXCTRLDUR);
+	DUMPCORE(HDMI_CORE_FC_EXCTRLSPAC);
+	DUMPCORE(HDMI_CORE_FC_CH0PREAM);
+	DUMPCORE(HDMI_CORE_FC_CH1PREAM);
+	DUMPCORE(HDMI_CORE_FC_CH2PREAM);
+	DUMPCORE(HDMI_CORE_FC_AVICONF0);
+	DUMPCORE(HDMI_CORE_FC_AVICONF1);
+	DUMPCORE(HDMI_CORE_FC_AVICONF2);
+	DUMPCORE(HDMI_CORE_FC_AVIVID);
+	DUMPCORE(HDMI_CORE_FC_PRCONF);
+
+	DUMPCORE(HDMI_CORE_MC_CLKDIS);
+	DUMPCORE(HDMI_CORE_MC_SWRSTZREQ);
+	DUMPCORE(HDMI_CORE_MC_FLOWCTRL);
+	DUMPCORE(HDMI_CORE_MC_PHYRSTZ);
+	DUMPCORE(HDMI_CORE_MC_LOCKONCLOCK);
+
+	DUMPCORE(HDMI_CORE_I2CM_SLAVE);
+	DUMPCORE(HDMI_CORE_I2CM_ADDRESS);
+	DUMPCORE(HDMI_CORE_I2CM_DATAO);
+	DUMPCORE(HDMI_CORE_I2CM_DATAI);
+	DUMPCORE(HDMI_CORE_I2CM_OPERATION);
+	DUMPCORE(HDMI_CORE_I2CM_INT);
+	DUMPCORE(HDMI_CORE_I2CM_CTLINT);
+	DUMPCORE(HDMI_CORE_I2CM_DIV);
+	DUMPCORE(HDMI_CORE_I2CM_SEGADDR);
+	DUMPCORE(HDMI_CORE_I2CM_SOFTRSTZ);
+	DUMPCORE(HDMI_CORE_I2CM_SEGPTR);
+	DUMPCORE(HDMI_CORE_I2CM_SS_SCL_HCNT_1_ADDR);
+	DUMPCORE(HDMI_CORE_I2CM_SS_SCL_HCNT_0_ADDR);
+	DUMPCORE(HDMI_CORE_I2CM_SS_SCL_LCNT_1_ADDR);
+	DUMPCORE(HDMI_CORE_I2CM_SS_SCL_LCNT_0_ADDR);
+	DUMPCORE(HDMI_CORE_I2CM_FS_SCL_HCNT_1_ADDR);
+	DUMPCORE(HDMI_CORE_I2CM_FS_SCL_HCNT_0_ADDR);
+	DUMPCORE(HDMI_CORE_I2CM_FS_SCL_LCNT_1_ADDR);
+	DUMPCORE(HDMI_CORE_I2CM_FS_SCL_LCNT_0_ADDR);
+	DUMPCORE(HDMI_CORE_I2CM_SDA_HOLD_ADDR);
+}
+
+static void hdmi_core_init(struct hdmi_core_vid_config *video_cfg,
+			struct hdmi_core_infoframe_avi *avi_cfg,
+			struct hdmi_config *cfg)
+{
+	DSSDBG("hdmi_core_init\n");
+
+	/* video core */
+	video_cfg->data_enable_pol = 1; /* It is always 1*/
+	video_cfg->v_fc_config.timings.hsync_level = cfg->timings.hsync_level;
+	video_cfg->v_fc_config.timings.x_res = cfg->timings.x_res;
+	video_cfg->v_fc_config.timings.hsw = cfg->timings.hsw - 1;
+	video_cfg->v_fc_config.timings.hbp = cfg->timings.hbp;
+	video_cfg->v_fc_config.timings.hfp = cfg->timings.hfp;
+	video_cfg->hblank = cfg->timings.hfp +
+				cfg->timings.hbp + cfg->timings.hsw - 1;
+	video_cfg->v_fc_config.timings.vsync_level = cfg->timings.vsync_level;
+	video_cfg->v_fc_config.timings.y_res = cfg->timings.y_res;
+	video_cfg->v_fc_config.timings.vsw = cfg->timings.vsw;
+	video_cfg->v_fc_config.timings.vfp = cfg->timings.vfp;
+	video_cfg->v_fc_config.timings.vbp = cfg->timings.vbp;
+	video_cfg->vblank_osc = 0; /* Always 0 - need to confirm */
+	video_cfg->vblank = cfg->timings.vsw +
+				cfg->timings.vfp + cfg->timings.vbp;
+	video_cfg->v_fc_config.cm.mode = cfg->cm.mode;
+	video_cfg->v_fc_config.timings.interlace = cfg->timings.interlace;
+
+	/* info frame */
+	avi_cfg->db1_format = 0;
+	avi_cfg->db1_active_info = 0;
+	avi_cfg->db1_bar_info_dv = 0;
+	avi_cfg->db1_scan_info = 0;
+	avi_cfg->db2_colorimetry = 0;
+	avi_cfg->db2_aspect_ratio = 0;
+	avi_cfg->db2_active_fmt_ar = 0;
+	avi_cfg->db3_itc = 0;
+	avi_cfg->db3_ec = 0;
+	avi_cfg->db3_q_range = 0;
+	avi_cfg->db3_nup_scaling = 0;
+	avi_cfg->db4_videocode = 0;
+	avi_cfg->db5_pixel_repeat = 0;
+	avi_cfg->db6_7_line_eoftop = 0;
+	avi_cfg->db8_9_line_sofbottom = 0;
+	avi_cfg->db10_11_pixel_eofleft = 0;
+	avi_cfg->db12_13_pixel_sofright = 0;
+}
+
+/* DSS_HDMI_CORE_VIDEO_CONFIG */
+static void hdmi_core_video_config(struct hdmi_core_data *core,
+			struct hdmi_core_vid_config *cfg)
+{
+	void __iomem *base = core->base;
+	unsigned char r = 0;
+	bool vsync_pol, hsync_pol;
+
+	vsync_pol =
+		cfg->v_fc_config.timings.vsync_level == OMAPDSS_SIG_ACTIVE_HIGH;
+	hsync_pol =
+		cfg->v_fc_config.timings.hsync_level == OMAPDSS_SIG_ACTIVE_HIGH;
+
+	/* Set hsync, vsync and data-enable polarity  */
+	r = hdmi_read_reg(base, HDMI_CORE_FC_INVIDCONF);
+	r = FLD_MOD(r, vsync_pol, 6, 6);
+	r = FLD_MOD(r, hsync_pol, 5, 5);
+	r = FLD_MOD(r, cfg->data_enable_pol, 4, 4);
+	r = FLD_MOD(r, cfg->vblank_osc, 1, 1);
+	r = FLD_MOD(r, cfg->v_fc_config.timings.interlace, 0, 0);
+	hdmi_write_reg(base, HDMI_CORE_FC_INVIDCONF, r);
+
+	/* set x resolution */
+	REG_FLD_MOD(base, HDMI_CORE_FC_INHACTIV1,
+			cfg->v_fc_config.timings.x_res >> 8, 4, 0);
+	REG_FLD_MOD(base, HDMI_CORE_FC_INHACTIV0,
+			cfg->v_fc_config.timings.x_res & 0xFF, 7, 0);
+
+	/* set y resolution */
+	REG_FLD_MOD(base, HDMI_CORE_FC_INVACTIV1,
+			cfg->v_fc_config.timings.y_res >> 8, 4, 0);
+	REG_FLD_MOD(base, HDMI_CORE_FC_INVACTIV0,
+			cfg->v_fc_config.timings.y_res & 0xFF, 7, 0);
+
+	/* set horizontal blanking pixels */
+	REG_FLD_MOD(base, HDMI_CORE_FC_INHBLANK1, cfg->hblank >> 8, 4, 0);
+	REG_FLD_MOD(base, HDMI_CORE_FC_INHBLANK0, cfg->hblank & 0xFF, 7, 0);
+
+	/* set vertial blanking pixels */
+	REG_FLD_MOD(base, HDMI_CORE_FC_INVBLANK, cfg->vblank, 7, 0);
+
+	/* set horizontal sync offset */
+	REG_FLD_MOD(base, HDMI_CORE_FC_HSYNCINDELAY1,
+			cfg->v_fc_config.timings.hfp >> 8, 4, 0);
+	REG_FLD_MOD(base, HDMI_CORE_FC_HSYNCINDELAY0,
+			cfg->v_fc_config.timings.hfp & 0xFF, 7, 0);
+
+	/* set vertical sync offset */
+	REG_FLD_MOD(base, HDMI_CORE_FC_VSYNCINDELAY,
+			cfg->v_fc_config.timings.vfp, 7, 0);
+
+	/* set horizontal sync pulse width */
+	REG_FLD_MOD(base, HDMI_CORE_FC_HSYNCINWIDTH1,
+			(cfg->v_fc_config.timings.hsw >> 8), 1, 0);
+	REG_FLD_MOD(base, HDMI_CORE_FC_HSYNCINWIDTH0,
+			cfg->v_fc_config.timings.hsw & 0xFF, 7, 0);
+
+	/*  set vertical sync pulse width */
+	REG_FLD_MOD(base, HDMI_CORE_FC_VSYNCINWIDTH,
+			cfg->v_fc_config.timings.vsw, 5, 0);
+
+	/* select DVI mode */
+	REG_FLD_MOD(base, HDMI_CORE_FC_INVIDCONF,
+			cfg->v_fc_config.cm.mode, 3, 3);
+}
+
+static void hdmi_core_config_video_packetizer(struct hdmi_core_data *core)
+{
+	void __iomem *base = core->base;
+	int clr_depth = 0;	/* 24 bit color depth */
+
+	/* COLOR_DEPTH */
+	REG_FLD_MOD(base, HDMI_CORE_VP_PR_CD, clr_depth, 7, 4);
+	/* BYPASS_EN */
+	REG_FLD_MOD(base, HDMI_CORE_VP_CONF, clr_depth ? 0 : 1, 6, 6);
+	/* PP_EN */
+	REG_FLD_MOD(base, HDMI_CORE_VP_CONF, clr_depth ? 1 : 0, 5, 5);
+	/* YCC422_EN */
+	REG_FLD_MOD(base, HDMI_CORE_VP_CONF, 0, 3, 3);
+	/* PP_STUFFING */
+	REG_FLD_MOD(base, HDMI_CORE_VP_STUFF, clr_depth ? 1 : 0, 1, 1);
+	/* YCC422_STUFFING */
+	REG_FLD_MOD(base, HDMI_CORE_VP_STUFF, 1, 2, 2);
+	/* OUTPUT_SELECTOR */
+	REG_FLD_MOD(base, HDMI_CORE_VP_CONF, clr_depth ? 0 : 2, 1, 0);
+}
+
+static void hdmi_core_config_csc(struct hdmi_core_data *core)
+{
+	int clr_depth = 0;	/* 24 bit color depth */
+
+	/* CSC_COLORDEPTH */
+	REG_FLD_MOD(core->base, HDMI_CORE_CSC_SCALE, clr_depth, 7, 4);
+}
+
+static void hdmi_core_config_video_sampler(struct hdmi_core_data *core)
+{
+	int video_mapping = 1;	/* for 24 bit color depth */
+
+	/* VIDEO_MAPPING */
+	REG_FLD_MOD(core->base, HDMI_CORE_TX_INVID0, video_mapping, 4, 0);
+}
+
+static void hdmi_core_aux_infoframe_avi_config(struct hdmi_core_data *core)
+{
+	void __iomem *base = core->base;
+	struct hdmi_core_infoframe_avi avi = core->avi_cfg;
+
+	REG_FLD_MOD(base, HDMI_CORE_FC_AVICONF0, avi.db1_format, 1, 0);
+	REG_FLD_MOD(base, HDMI_CORE_FC_AVICONF0, avi.db1_active_info, 6, 6);
+	REG_FLD_MOD(base, HDMI_CORE_FC_AVICONF0, avi.db1_bar_info_dv, 3, 2);
+	REG_FLD_MOD(base, HDMI_CORE_FC_AVICONF0, avi.db1_scan_info, 5, 4);
+	REG_FLD_MOD(base, HDMI_CORE_FC_AVICONF1, avi.db2_colorimetry, 7, 6);
+	REG_FLD_MOD(base, HDMI_CORE_FC_AVICONF1, avi.db2_aspect_ratio, 5, 4);
+	REG_FLD_MOD(base, HDMI_CORE_FC_AVICONF1, avi.db2_active_fmt_ar, 3, 0);
+	REG_FLD_MOD(base, HDMI_CORE_FC_AVICONF2, avi.db3_itc, 7, 7);
+	REG_FLD_MOD(base, HDMI_CORE_FC_AVICONF2, avi.db3_ec, 6, 4);
+	REG_FLD_MOD(base, HDMI_CORE_FC_AVICONF2, avi.db3_q_range, 3, 2);
+	REG_FLD_MOD(base, HDMI_CORE_FC_AVICONF2, avi.db3_nup_scaling, 1, 0);
+	REG_FLD_MOD(base, HDMI_CORE_FC_AVIVID, avi.db4_videocode, 6, 0);
+	REG_FLD_MOD(base, HDMI_CORE_FC_PRCONF, avi.db5_pixel_repeat, 3, 0);
+}
+
+static void hdmi_core_csc_config(struct hdmi_core_data *core,
+		struct csc_table csc_coeff)
+{
+	void __iomem *base = core->base;
+
+	REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_A1_MSB, csc_coeff.a1 >> 8 , 6, 0);
+	REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_A1_LSB, csc_coeff.a1, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_A2_MSB, csc_coeff.a2 >> 8, 6, 0);
+	REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_A2_LSB, csc_coeff.a2, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_A3_MSB, csc_coeff.a3 >> 8, 6, 0);
+	REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_A3_LSB, csc_coeff.a3, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_A4_MSB, csc_coeff.a4 >> 8, 6, 0);
+	REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_A4_LSB, csc_coeff.a4, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_B1_MSB, csc_coeff.b1 >> 8, 6, 0);
+	REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_B1_LSB, csc_coeff.b1, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_B2_MSB, csc_coeff.b2 >> 8, 6, 0);
+	REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_B2_LSB, csc_coeff.b2, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_B3_MSB, csc_coeff.b3 >> 8, 6, 0);
+	REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_B3_LSB, csc_coeff.b3, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_B4_MSB, csc_coeff.b4 >> 8, 6, 0);
+	REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_B4_LSB, csc_coeff.b4, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_C1_MSB, csc_coeff.c1 >> 8, 6, 0);
+	REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_C1_LSB, csc_coeff.c1, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_C2_MSB, csc_coeff.c2 >> 8, 6, 0);
+	REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_C2_LSB, csc_coeff.c2, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_C3_MSB, csc_coeff.c3 >> 8, 6, 0);
+	REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_C3_LSB, csc_coeff.c3, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_C4_MSB, csc_coeff.c4 >> 8, 6, 0);
+	REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_C4_LSB, csc_coeff.c4, 7, 0);
+
+	REG_FLD_MOD(base, HDMI_CORE_MC_FLOWCTRL, 0x1, 0, 0);
+}
+
+static void hdmi_core_configure_range(struct hdmi_core_data *core)
+{
+	struct csc_table csc_coeff = { 0 };
+
+	/* support limited range with 24 bit color depth for now */
+	csc_coeff = csc_table_deepcolor[0];
+	core->avi_cfg.db3_q_range = HDMI_INFOFRAME_AVI_DB3Q_LR;
+
+	hdmi_core_csc_config(core, csc_coeff);
+	hdmi_core_aux_infoframe_avi_config(core);
+}
+
+static void hdmi_core_enable_video_path(struct hdmi_core_data *core)
+{
+	void __iomem *base = core->base;
+
+	DSSDBG("hdmi_core_enable_video_path\n");
+
+	REG_FLD_MOD(base, HDMI_CORE_FC_CTRLDUR, 0x0C, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_FC_EXCTRLDUR, 0x20, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_FC_EXCTRLSPAC, 0x01, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_FC_CH0PREAM, 0x0B, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_FC_CH1PREAM, 0x16, 5, 0);
+	REG_FLD_MOD(base, HDMI_CORE_FC_CH2PREAM, 0x21, 5, 0);
+	REG_FLD_MOD(base, HDMI_CORE_MC_CLKDIS, 0x00, 0, 0);
+	REG_FLD_MOD(base, HDMI_CORE_MC_CLKDIS, 0x00, 1, 1);
+}
+
+static void hdmi_core_mask_interrupts(struct hdmi_core_data *core)
+{
+	void __iomem *base = core->base;
+
+	/* Master IRQ mask */
+	REG_FLD_MOD(base, HDMI_CORE_IH_MUTE, 0x3, 1, 0);
+
+	/* Mask all the interrupts in HDMI core */
+
+	REG_FLD_MOD(base, HDMI_CORE_VP_MASK, 0xff, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_FC_MASK0, 0xe7, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_FC_MASK1, 0xfb, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_FC_MASK2, 0x3, 1, 0);
+
+	REG_FLD_MOD(base, HDMI_CORE_AUD_INT, 0x3, 3, 2);
+	REG_FLD_MOD(base, HDMI_CORE_AUD_GP_MASK, 0x3, 1, 0);
+
+	REG_FLD_MOD(base, HDMI_CORE_CEC_MASK, 0x7f, 6, 0);
+
+	REG_FLD_MOD(base, HDMI_CORE_I2CM_CTLINT, 0x1, 6, 6);
+	REG_FLD_MOD(base, HDMI_CORE_I2CM_CTLINT, 0x1, 2, 2);
+	REG_FLD_MOD(base, HDMI_CORE_I2CM_INT, 0x1, 2, 2);
+
+	REG_FLD_MOD(base, HDMI_CORE_PHY_MASK0, 0xf3, 7, 0);
+
+	REG_FLD_MOD(base, HDMI_CORE_IH_PHY_STAT0, 0xff, 7, 0);
+
+	/* Clear all the current interrupt bits */
+
+	REG_FLD_MOD(base, HDMI_CORE_IH_VP_STAT0, 0xff, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_IH_FC_STAT0, 0xe7, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_IH_FC_STAT1, 0xfb, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_IH_FC_STAT2, 0x3, 1, 0);
+
+	REG_FLD_MOD(base, HDMI_CORE_IH_AS_STAT0, 0x7, 2, 0);
+
+	REG_FLD_MOD(base, HDMI_CORE_IH_CEC_STAT0, 0x7f, 6, 0);
+
+	REG_FLD_MOD(base, HDMI_CORE_IH_I2CM_STAT0, 0x3, 1, 0);
+
+	REG_FLD_MOD(base, HDMI_CORE_IH_PHY_STAT0, 0xff, 7, 0);
+}
+
+static void hdmi_core_enable_interrupts(struct hdmi_core_data *core)
+{
+	/* Unmute interrupts */
+	REG_FLD_MOD(core->base, HDMI_CORE_IH_MUTE, 0x0, 1, 0);
+}
+
+int hdmi5_core_handle_irqs(struct hdmi_core_data *core)
+{
+	void __iomem *base = core->base;
+
+	REG_FLD_MOD(base, HDMI_CORE_IH_FC_STAT0, 0xff, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_IH_FC_STAT1, 0xff, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_IH_FC_STAT2, 0xff, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_IH_AS_STAT0, 0xff, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_IH_PHY_STAT0, 0xff, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_IH_I2CM_STAT0, 0xff, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_IH_CEC_STAT0, 0xff, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_IH_VP_STAT0, 0xff, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_IH_I2CMPHY_STAT0, 0xff, 7, 0);
+
+	return 0;
+}
+
+void hdmi5_configure(struct hdmi_core_data *core, struct hdmi_wp_data *wp,
+		struct hdmi_config *cfg)
+{
+	struct omap_video_timings video_timing;
+	struct hdmi_video_format video_format;
+	struct hdmi_core_vid_config v_core_cfg;
+	struct hdmi_core_infoframe_avi *avi_cfg = &core->avi_cfg;
+
+	hdmi_core_mask_interrupts(core);
+
+	hdmi_core_init(&v_core_cfg, avi_cfg, cfg);
+
+	hdmi_wp_init_vid_fmt_timings(&video_format, &video_timing, cfg);
+
+	hdmi_wp_video_config_timing(wp, &video_timing);
+
+	/* video config */
+	video_format.packing_mode = HDMI_PACK_24b_RGB_YUV444_YUV422;
+
+	hdmi_wp_video_config_format(wp, &video_format);
+
+	hdmi_wp_video_config_interface(wp, &video_timing);
+
+	hdmi_core_configure_range(core);
+
+	/*
+	 * configure core video part, set software reset in the core
+	 */
+	v_core_cfg.packet_mode = HDMI_PACKETMODE24BITPERPIXEL;
+
+	hdmi_core_video_config(core, &v_core_cfg);
+
+	hdmi_core_config_video_packetizer(core);
+	hdmi_core_config_csc(core);
+	hdmi_core_config_video_sampler(core);
+
+	/*
+	 * configure packet info frame video see doc CEA861-D page 65
+	 */
+	avi_cfg->db1_format = HDMI_INFOFRAME_AVI_DB1Y_RGB;
+	avi_cfg->db1_active_info =
+			HDMI_INFOFRAME_AVI_DB1A_ACTIVE_FORMAT_OFF;
+	avi_cfg->db1_bar_info_dv = HDMI_INFOFRAME_AVI_DB1B_NO;
+	avi_cfg->db1_scan_info = HDMI_INFOFRAME_AVI_DB1S_0;
+	avi_cfg->db2_colorimetry = HDMI_INFOFRAME_AVI_DB2C_NO;
+	avi_cfg->db2_aspect_ratio = HDMI_INFOFRAME_AVI_DB2M_NO;
+	avi_cfg->db2_active_fmt_ar = HDMI_INFOFRAME_AVI_DB2R_SAME;
+	avi_cfg->db3_itc = HDMI_INFOFRAME_AVI_DB3ITC_NO;
+	avi_cfg->db3_ec = HDMI_INFOFRAME_AVI_DB3EC_XVYUV601;
+	avi_cfg->db3_q_range = HDMI_INFOFRAME_AVI_DB3Q_DEFAULT;
+	avi_cfg->db3_nup_scaling = HDMI_INFOFRAME_AVI_DB3SC_NO;
+	avi_cfg->db4_videocode = cfg->cm.code;
+	avi_cfg->db5_pixel_repeat = HDMI_INFOFRAME_AVI_DB5PR_NO;
+	avi_cfg->db6_7_line_eoftop = 0;
+	avi_cfg->db8_9_line_sofbottom = 0;
+	avi_cfg->db10_11_pixel_eofleft = 0;
+	avi_cfg->db12_13_pixel_sofright = 0;
+
+	hdmi_core_aux_infoframe_avi_config(core);
+
+	hdmi_core_enable_video_path(core);
+
+	hdmi_core_enable_interrupts(core);
+}
+
+
+#if defined(CONFIG_OMAP5_DSS_HDMI_AUDIO)
+
+static void hdmi5_core_audio_config(struct hdmi_core_data *core,
+			struct hdmi_core_audio_config *cfg)
+{
+	void __iomem *base = core->base;
+	u8 val;
+
+	/* Mute audio before configuring */
+	REG_FLD_MOD(base, HDMI_CORE_FC_AUDSCONF, 0xf, 7, 4);
+
+	/* Set the N parameter */
+	REG_FLD_MOD(base, HDMI_CORE_AUD_N1, cfg->n, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_AUD_N2, cfg->n >> 8, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_AUD_N3, cfg->n >> 16, 3, 0);
+
+	/*
+	 * CTS manual mode. Automatic mode is not supported when using audio
+	 * parallel interface.
+	 */
+	REG_FLD_MOD(base, HDMI_CORE_AUD_CTS3, 1, 4, 4);
+	REG_FLD_MOD(base, HDMI_CORE_AUD_CTS1, cfg->cts, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_AUD_CTS2, cfg->cts >> 8, 7, 0);
+	REG_FLD_MOD(base, HDMI_CORE_AUD_CTS3, cfg->cts >> 16, 3, 0);
+
+	/* Layout of Audio Sample Packets: 2-channel or multichannels */
+	if (cfg->layout == HDMI_AUDIO_LAYOUT_2CH)
+		REG_FLD_MOD(base, HDMI_CORE_FC_AUDSCONF, 0, 0, 0);
+	else
+		REG_FLD_MOD(base, HDMI_CORE_FC_AUDSCONF, 1, 0, 0);
+
+	/* Configure IEC-609580 Validity bits */
+	/* Channel 0 is valid */
+	REG_FLD_MOD(base, HDMI_CORE_FC_AUDSV, 0, 0, 0);
+	REG_FLD_MOD(base, HDMI_CORE_FC_AUDSV, 0, 4, 4);
+
+	if (cfg->layout == HDMI_AUDIO_LAYOUT_2CH)
+		val = 1;
+	else
+		val = 0;
+
+	/* Channels 1, 2 setting */
+	REG_FLD_MOD(base, HDMI_CORE_FC_AUDSV, val, 1, 1);
+	REG_FLD_MOD(base, HDMI_CORE_FC_AUDSV, val, 5, 5);
+	REG_FLD_MOD(base, HDMI_CORE_FC_AUDSV, val, 2, 2);
+	REG_FLD_MOD(base, HDMI_CORE_FC_AUDSV, val, 6, 6);
+	/* Channel 3 setting */
+	if (cfg->layout == HDMI_AUDIO_LAYOUT_6CH)
+		val = 1;
+	REG_FLD_MOD(base, HDMI_CORE_FC_AUDSV, val, 3, 3);
+	REG_FLD_MOD(base, HDMI_CORE_FC_AUDSV, val, 7, 7);
+
+	/* Configure IEC-60958 User bits */
+	/* TODO: should be set by user. */
+	REG_FLD_MOD(base, HDMI_CORE_FC_AUDSU, 0, 7, 0);
+
+	/* Configure IEC-60958 Channel Status word */
+	/* CGMSA */
+	val = cfg->iec60958_cfg->status[5] & IEC958_AES5_CON_CGMSA;
+	REG_FLD_MOD(base, HDMI_CORE_FC_AUDSCHNLS(0), val, 5, 4);
+
+	/* Copyright */
+	val = (cfg->iec60958_cfg->status[0] &
+			IEC958_AES0_CON_NOT_COPYRIGHT) >> 2;
+	REG_FLD_MOD(base, HDMI_CORE_FC_AUDSCHNLS(0), val, 0, 0);
+
+	/* Category */
+	hdmi_write_reg(base, HDMI_CORE_FC_AUDSCHNLS(1),
+		cfg->iec60958_cfg->status[1]);
+
+	/* PCM audio mode */
+	val = (cfg->iec60958_cfg->status[0] & IEC958_AES0_CON_MODE) >> 6;
+	REG_FLD_MOD(base, HDMI_CORE_FC_AUDSCHNLS(2), val, 6, 4);
+
+	/* Source number */
+	val = cfg->iec60958_cfg->status[2] & IEC958_AES2_CON_SOURCE;
+	REG_FLD_MOD(base, HDMI_CORE_FC_AUDSCHNLS(2), val, 3, 4);
+
+	/* Channel number right 0  */
+	REG_FLD_MOD(base, HDMI_CORE_FC_AUDSCHNLS(3), 2, 3, 0);
+	/* Channel number right 1*/
+	REG_FLD_MOD(base, HDMI_CORE_FC_AUDSCHNLS(3), 4, 7, 4);
+	/* Channel number right 2  */
+	REG_FLD_MOD(base, HDMI_CORE_FC_AUDSCHNLS(4), 6, 3, 0);
+	/* Channel number right 3*/
+	REG_FLD_MOD(base, HDMI_CORE_FC_AUDSCHNLS(4), 8, 7, 4);
+	/* Channel number left 0  */
+	REG_FLD_MOD(base, HDMI_CORE_FC_AUDSCHNLS(5), 1, 3, 0);
+	/* Channel number left 1*/
+	REG_FLD_MOD(base, HDMI_CORE_FC_AUDSCHNLS(5), 3, 7, 4);
+	/* Channel number left 2  */
+	REG_FLD_MOD(base, HDMI_CORE_FC_AUDSCHNLS(6), 5, 3, 0);
+	/* Channel number left 3*/
+	REG_FLD_MOD(base, HDMI_CORE_FC_AUDSCHNLS(6), 7, 7, 4);
+
+	/* Clock accuracy and sample rate */
+	hdmi_write_reg(base, HDMI_CORE_FC_AUDSCHNLS(7),
+		cfg->iec60958_cfg->status[3]);
+
+	/* Original sample rate and word length */
+	hdmi_write_reg(base, HDMI_CORE_FC_AUDSCHNLS(8),
+		cfg->iec60958_cfg->status[4]);
+
+	/* Enable FIFO empty and full interrupts */
+	REG_FLD_MOD(base, HDMI_CORE_AUD_INT, 3, 3, 2);
+
+	/* Configure GPA */
+	/* select HBR/SPDIF interfaces */
+	if (cfg->layout == HDMI_AUDIO_LAYOUT_2CH) {
+		/* select HBR/SPDIF interfaces */
+		REG_FLD_MOD(base, HDMI_CORE_AUD_CONF0, 0, 5, 5);
+		/* enable two channels in GPA */
+		REG_FLD_MOD(base, HDMI_CORE_AUD_GP_CONF1, 3, 7, 0);
+	} else if (cfg->layout == HDMI_AUDIO_LAYOUT_6CH) {
+		/* select HBR/SPDIF interfaces */
+		REG_FLD_MOD(base, HDMI_CORE_AUD_CONF0, 0, 5, 5);
+		/* enable six channels in GPA */
+		REG_FLD_MOD(base, HDMI_CORE_AUD_GP_CONF1, 0x3F, 7, 0);
+	} else {
+		/* select HBR/SPDIF interfaces */
+		REG_FLD_MOD(base, HDMI_CORE_AUD_CONF0, 0, 5, 5);
+		/* enable eight channels in GPA */
+		REG_FLD_MOD(base, HDMI_CORE_AUD_GP_CONF1, 0xFF, 7, 0);
+	}
+
+	/* disable HBR */
+	REG_FLD_MOD(base, HDMI_CORE_AUD_GP_CONF2, 0, 0, 0);
+	/* enable PCUV */
+	REG_FLD_MOD(base, HDMI_CORE_AUD_GP_CONF2, 1, 1, 1);
+	/* enable GPA FIFO full and empty mask */
+	REG_FLD_MOD(base, HDMI_CORE_AUD_GP_MASK, 3, 1, 0);
+	/* set polarity of GPA FIFO empty interrupts */
+	REG_FLD_MOD(base, HDMI_CORE_AUD_GP_POL, 1, 0, 0);
+
+	/* unmute audio */
+	REG_FLD_MOD(base, HDMI_CORE_FC_AUDSCONF, 0, 7, 4);
+}
+
+static void hdmi5_core_audio_infoframe_cfg(struct hdmi_core_data *core,
+	 struct snd_cea_861_aud_if *info_aud)
+{
+	void __iomem *base = core->base;
+
+	/* channel count and coding type fields in AUDICONF0 are swapped */
+	hdmi_write_reg(base, HDMI_CORE_FC_AUDICONF0,
+		(info_aud->db1_ct_cc & CEA861_AUDIO_INFOFRAME_DB1CC) << 4 |
+		(info_aud->db1_ct_cc & CEA861_AUDIO_INFOFRAME_DB1CT) >> 4);
+
+	hdmi_write_reg(base, HDMI_CORE_FC_AUDICONF1, info_aud->db2_sf_ss);
+	hdmi_write_reg(base, HDMI_CORE_FC_AUDICONF2, info_aud->db4_ca);
+	hdmi_write_reg(base, HDMI_CORE_FC_AUDICONF3, info_aud->db5_dminh_lsv);
+}
+
+int hdmi5_audio_config(struct hdmi_core_data *core, struct hdmi_wp_data *wp,
+			struct omap_dss_audio *audio, u32 pclk)
+{
+	struct hdmi_audio_format audio_format;
+	struct hdmi_audio_dma audio_dma;
+	struct hdmi_core_audio_config core_cfg;
+	int err, n, cts, channel_count;
+	unsigned int fs_nr;
+	bool word_length_16b = false;
+
+	if (!audio || !audio->iec || !audio->cea || !core)
+		return -EINVAL;
+
+	core_cfg.iec60958_cfg = audio->iec;
+
+	if (!(audio->iec->status[4] & IEC958_AES4_CON_MAX_WORDLEN_24) &&
+		(audio->iec->status[4] & IEC958_AES4_CON_WORDLEN_20_16))
+			word_length_16b = true;
+
+	/* only 16-bit word length supported atm */
+	if (!word_length_16b)
+		return -EINVAL;
+
+	switch (audio->iec->status[3] & IEC958_AES3_CON_FS) {
+	case IEC958_AES3_CON_FS_32000:
+		fs_nr = 32000;
+		break;
+	case IEC958_AES3_CON_FS_44100:
+		fs_nr = 44100;
+		break;
+	case IEC958_AES3_CON_FS_48000:
+		fs_nr = 48000;
+		break;
+	case IEC958_AES3_CON_FS_88200:
+		fs_nr = 88200;
+		break;
+	case IEC958_AES3_CON_FS_96000:
+		fs_nr = 96000;
+		break;
+	case IEC958_AES3_CON_FS_176400:
+		fs_nr = 176400;
+		break;
+	case IEC958_AES3_CON_FS_192000:
+		fs_nr = 192000;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	err = hdmi_compute_acr(pclk, fs_nr, &n, &cts);
+	core_cfg.n = n;
+	core_cfg.cts = cts;
+
+	/* Audio channels settings */
+	channel_count = (audio->cea->db1_ct_cc & CEA861_AUDIO_INFOFRAME_DB1CC)
+				+ 1;
+
+	if (channel_count == 2)
+		core_cfg.layout = HDMI_AUDIO_LAYOUT_2CH;
+	else if (channel_count == 6)
+		core_cfg.layout = HDMI_AUDIO_LAYOUT_6CH;
+	else
+		core_cfg.layout = HDMI_AUDIO_LAYOUT_8CH;
+
+	/* DMA settings */
+	if (word_length_16b)
+		audio_dma.transfer_size = 0x10;
+	else
+		audio_dma.transfer_size = 0x20;
+	audio_dma.block_size = 0xC0;
+	audio_dma.mode = HDMI_AUDIO_TRANSF_DMA;
+	audio_dma.fifo_threshold = 0x20; /* in number of samples */
+
+	/* audio FIFO format settings for 16-bit samples*/
+	audio_format.samples_per_word = HDMI_AUDIO_ONEWORD_TWOSAMPLES;
+	audio_format.sample_size = HDMI_AUDIO_SAMPLE_16BITS;
+	audio_format.justification = HDMI_AUDIO_JUSTIFY_LEFT;
+
+	/* only LPCM atm */
+	audio_format.type = HDMI_AUDIO_TYPE_LPCM;
+
+	/* disable start/stop signals of IEC 60958 blocks */
+	audio_format.en_sig_blk_strt_end = HDMI_AUDIO_BLOCK_SIG_STARTEND_ON;
+
+	/* configure DMA and audio FIFO format*/
+	hdmi_wp_audio_config_dma(wp, &audio_dma);
+	hdmi_wp_audio_config_format(wp, &audio_format);
+
+	/* configure the core */
+	hdmi5_core_audio_config(core, &core_cfg);
+
+	/* configure CEA 861 audio infoframe */
+	hdmi5_core_audio_infoframe_cfg(core, audio->cea);
+
+	return 0;
+}
+#endif
+
+int hdmi5_core_init(struct platform_device *pdev, struct hdmi_core_data *core)
+{
+	struct resource *res;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "core");
+	if (!res) {
+		DSSERR("can't get CORE IORESOURCE_MEM HDMI\n");
+		return -EINVAL;
+	}
+
+	core->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(core->base)) {
+		DSSERR("can't ioremap HDMI core\n");
+		return PTR_ERR(core->base);
+	}
+
+	return 0;
+}
diff --git a/drivers/video/fbdev/omap2/dss/hdmi5_core.h b/drivers/video/fbdev/omap2/dss/hdmi5_core.h
new file mode 100644
index 000000000000..ce7e9f376f04
--- /dev/null
+++ b/drivers/video/fbdev/omap2/dss/hdmi5_core.h
@@ -0,0 +1,306 @@
+/*
+ * HDMI driver definition for TI OMAP5 processors.
+ *
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _HDMI5_CORE_H_
+#define _HDMI5_CORE_H_
+
+#include "hdmi.h"
+
+/* HDMI IP Core System */
+
+/* HDMI Identification */
+#define HDMI_CORE_DESIGN_ID			0x00000
+#define HDMI_CORE_REVISION_ID			0x00004
+#define HDMI_CORE_PRODUCT_ID0			0x00008
+#define HDMI_CORE_PRODUCT_ID1			0x0000C
+#define HDMI_CORE_CONFIG0_ID			0x00010
+#define HDMI_CORE_CONFIG1_ID			0x00014
+#define HDMI_CORE_CONFIG2_ID			0x00018
+#define HDMI_CORE_CONFIG3_ID			0x0001C
+
+/* HDMI Interrupt */
+#define HDMI_CORE_IH_FC_STAT0			0x00400
+#define HDMI_CORE_IH_FC_STAT1			0x00404
+#define HDMI_CORE_IH_FC_STAT2			0x00408
+#define HDMI_CORE_IH_AS_STAT0			0x0040C
+#define HDMI_CORE_IH_PHY_STAT0			0x00410
+#define HDMI_CORE_IH_I2CM_STAT0			0x00414
+#define HDMI_CORE_IH_CEC_STAT0			0x00418
+#define HDMI_CORE_IH_VP_STAT0			0x0041C
+#define HDMI_CORE_IH_I2CMPHY_STAT0		0x00420
+#define HDMI_CORE_IH_MUTE			0x007FC
+
+/* HDMI Video Sampler */
+#define HDMI_CORE_TX_INVID0			0x00800
+#define HDMI_CORE_TX_INSTUFFING			0x00804
+#define HDMI_CORE_TX_RGYDATA0			0x00808
+#define HDMI_CORE_TX_RGYDATA1			0x0080C
+#define HDMI_CORE_TX_RCRDATA0			0x00810
+#define HDMI_CORE_TX_RCRDATA1			0x00814
+#define HDMI_CORE_TX_BCBDATA0			0x00818
+#define HDMI_CORE_TX_BCBDATA1			0x0081C
+
+/* HDMI Video Packetizer */
+#define HDMI_CORE_VP_STATUS			0x02000
+#define HDMI_CORE_VP_PR_CD			0x02004
+#define HDMI_CORE_VP_STUFF			0x02008
+#define HDMI_CORE_VP_REMAP			0x0200C
+#define HDMI_CORE_VP_CONF			0x02010
+#define HDMI_CORE_VP_STAT			0x02014
+#define HDMI_CORE_VP_INT			0x02018
+#define HDMI_CORE_VP_MASK			0x0201C
+#define HDMI_CORE_VP_POL			0x02020
+
+/* Frame Composer */
+#define HDMI_CORE_FC_INVIDCONF			0x04000
+#define HDMI_CORE_FC_INHACTIV0			0x04004
+#define HDMI_CORE_FC_INHACTIV1			0x04008
+#define HDMI_CORE_FC_INHBLANK0			0x0400C
+#define HDMI_CORE_FC_INHBLANK1			0x04010
+#define HDMI_CORE_FC_INVACTIV0			0x04014
+#define HDMI_CORE_FC_INVACTIV1			0x04018
+#define HDMI_CORE_FC_INVBLANK			0x0401C
+#define HDMI_CORE_FC_HSYNCINDELAY0		0x04020
+#define HDMI_CORE_FC_HSYNCINDELAY1		0x04024
+#define HDMI_CORE_FC_HSYNCINWIDTH0		0x04028
+#define HDMI_CORE_FC_HSYNCINWIDTH1		0x0402C
+#define HDMI_CORE_FC_VSYNCINDELAY		0x04030
+#define HDMI_CORE_FC_VSYNCINWIDTH		0x04034
+#define HDMI_CORE_FC_INFREQ0			0x04038
+#define HDMI_CORE_FC_INFREQ1			0x0403C
+#define HDMI_CORE_FC_INFREQ2			0x04040
+#define HDMI_CORE_FC_CTRLDUR			0x04044
+#define HDMI_CORE_FC_EXCTRLDUR			0x04048
+#define HDMI_CORE_FC_EXCTRLSPAC			0x0404C
+#define HDMI_CORE_FC_CH0PREAM			0x04050
+#define HDMI_CORE_FC_CH1PREAM			0x04054
+#define HDMI_CORE_FC_CH2PREAM			0x04058
+#define HDMI_CORE_FC_AVICONF3			0x0405C
+#define HDMI_CORE_FC_GCP			0x04060
+#define HDMI_CORE_FC_AVICONF0			0x04064
+#define HDMI_CORE_FC_AVICONF1			0x04068
+#define HDMI_CORE_FC_AVICONF2			0x0406C
+#define HDMI_CORE_FC_AVIVID			0x04070
+#define HDMI_CORE_FC_AVIETB0			0x04074
+#define HDMI_CORE_FC_AVIETB1			0x04078
+#define HDMI_CORE_FC_AVISBB0			0x0407C
+#define HDMI_CORE_FC_AVISBB1			0x04080
+#define HDMI_CORE_FC_AVIELB0			0x04084
+#define HDMI_CORE_FC_AVIELB1			0x04088
+#define HDMI_CORE_FC_AVISRB0			0x0408C
+#define HDMI_CORE_FC_AVISRB1			0x04090
+#define HDMI_CORE_FC_AUDICONF0			0x04094
+#define HDMI_CORE_FC_AUDICONF1			0x04098
+#define HDMI_CORE_FC_AUDICONF2			0x0409C
+#define HDMI_CORE_FC_AUDICONF3			0x040A0
+#define HDMI_CORE_FC_VSDIEEEID0			0x040A4
+#define HDMI_CORE_FC_VSDSIZE			0x040A8
+#define HDMI_CORE_FC_VSDIEEEID1			0x040C0
+#define HDMI_CORE_FC_VSDIEEEID2			0x040C4
+#define HDMI_CORE_FC_VSDPAYLOAD(n)		(n * 4 + 0x040C8)
+#define HDMI_CORE_FC_SPDVENDORNAME(n)		(n * 4 + 0x04128)
+#define HDMI_CORE_FC_SPDPRODUCTNAME(n)		(n * 4 + 0x04148)
+#define HDMI_CORE_FC_SPDDEVICEINF		0x04188
+#define HDMI_CORE_FC_AUDSCONF			0x0418C
+#define HDMI_CORE_FC_AUDSSTAT			0x04190
+#define HDMI_CORE_FC_AUDSV			0x04194
+#define HDMI_CORE_FC_AUDSU			0x04198
+#define HDMI_CORE_FC_AUDSCHNLS(n)		(n * 4 + 0x0419C)
+#define HDMI_CORE_FC_CTRLQHIGH			0x041CC
+#define HDMI_CORE_FC_CTRLQLOW			0x041D0
+#define HDMI_CORE_FC_ACP0			0x041D4
+#define HDMI_CORE_FC_ACP(n)			((16-n) * 4 + 0x04208)
+#define HDMI_CORE_FC_ISCR1_0			0x04248
+#define HDMI_CORE_FC_ISCR1(n)			((16-n) * 4 + 0x0424C)
+#define HDMI_CORE_FC_ISCR2(n)			((15-n) * 4 + 0x0428C)
+#define HDMI_CORE_FC_DATAUTO0			0x042CC
+#define HDMI_CORE_FC_DATAUTO1			0x042D0
+#define HDMI_CORE_FC_DATAUTO2			0x042D4
+#define HDMI_CORE_FC_DATMAN			0x042D8
+#define HDMI_CORE_FC_DATAUTO3			0x042DC
+#define HDMI_CORE_FC_RDRB(n)			(n * 4 + 0x042E0)
+#define HDMI_CORE_FC_STAT0			0x04340
+#define HDMI_CORE_FC_INT0			0x04344
+#define HDMI_CORE_FC_MASK0			0x04348
+#define HDMI_CORE_FC_POL0			0x0434C
+#define HDMI_CORE_FC_STAT1			0x04350
+#define HDMI_CORE_FC_INT1			0x04354
+#define HDMI_CORE_FC_MASK1			0x04358
+#define HDMI_CORE_FC_POL1			0x0435C
+#define HDMI_CORE_FC_STAT2			0x04360
+#define HDMI_CORE_FC_INT2			0x04364
+#define HDMI_CORE_FC_MASK2			0x04368
+#define HDMI_CORE_FC_POL2			0x0436C
+#define HDMI_CORE_FC_PRCONF			0x04380
+#define HDMI_CORE_FC_GMD_STAT			0x04400
+#define HDMI_CORE_FC_GMD_EN			0x04404
+#define HDMI_CORE_FC_GMD_UP			0x04408
+#define HDMI_CORE_FC_GMD_CONF			0x0440C
+#define HDMI_CORE_FC_GMD_HB			0x04410
+#define HDMI_CORE_FC_GMD_PB(n)			(n * 4 + 0x04414)
+#define HDMI_CORE_FC_DBGFORCE			0x04800
+#define HDMI_CORE_FC_DBGAUD0CH0			0x04804
+#define HDMI_CORE_FC_DBGAUD1CH0			0x04808
+#define HDMI_CORE_FC_DBGAUD2CH0			0x0480C
+#define HDMI_CORE_FC_DBGAUD0CH1			0x04810
+#define HDMI_CORE_FC_DBGAUD1CH1			0x04814
+#define HDMI_CORE_FC_DBGAUD2CH1			0x04818
+#define HDMI_CORE_FC_DBGAUD0CH2			0x0481C
+#define HDMI_CORE_FC_DBGAUD1CH2			0x04820
+#define HDMI_CORE_FC_DBGAUD2CH2			0x04824
+#define HDMI_CORE_FC_DBGAUD0CH3			0x04828
+#define HDMI_CORE_FC_DBGAUD1CH3			0x0482C
+#define HDMI_CORE_FC_DBGAUD2CH3			0x04830
+#define HDMI_CORE_FC_DBGAUD0CH4			0x04834
+#define HDMI_CORE_FC_DBGAUD1CH4			0x04838
+#define HDMI_CORE_FC_DBGAUD2CH4			0x0483C
+#define HDMI_CORE_FC_DBGAUD0CH5			0x04840
+#define HDMI_CORE_FC_DBGAUD1CH5			0x04844
+#define HDMI_CORE_FC_DBGAUD2CH5			0x04848
+#define HDMI_CORE_FC_DBGAUD0CH6			0x0484C
+#define HDMI_CORE_FC_DBGAUD1CH6			0x04850
+#define HDMI_CORE_FC_DBGAUD2CH6			0x04854
+#define HDMI_CORE_FC_DBGAUD0CH7			0x04858
+#define HDMI_CORE_FC_DBGAUD1CH7			0x0485C
+#define HDMI_CORE_FC_DBGAUD2CH7			0x04860
+#define HDMI_CORE_FC_DBGTMDS0			0x04864
+#define HDMI_CORE_FC_DBGTMDS1			0x04868
+#define HDMI_CORE_FC_DBGTMDS2			0x0486C
+#define HDMI_CORE_PHY_MASK0			0x0C018
+#define HDMI_CORE_PHY_I2CM_INT_ADDR		0x0C09C
+#define HDMI_CORE_PHY_I2CM_CTLINT_ADDR		0x0C0A0
+
+/* HDMI Audio */
+#define HDMI_CORE_AUD_CONF0			0x0C400
+#define HDMI_CORE_AUD_CONF1			0x0C404
+#define HDMI_CORE_AUD_INT			0x0C408
+#define HDMI_CORE_AUD_N1			0x0C800
+#define HDMI_CORE_AUD_N2			0x0C804
+#define HDMI_CORE_AUD_N3			0x0C808
+#define HDMI_CORE_AUD_CTS1			0x0C80C
+#define HDMI_CORE_AUD_CTS2			0x0C810
+#define HDMI_CORE_AUD_CTS3			0x0C814
+#define HDMI_CORE_AUD_INCLKFS			0x0C818
+#define HDMI_CORE_AUD_CC08			0x0CC08
+#define HDMI_CORE_AUD_GP_CONF0			0x0D400
+#define HDMI_CORE_AUD_GP_CONF1			0x0D404
+#define HDMI_CORE_AUD_GP_CONF2			0x0D408
+#define HDMI_CORE_AUD_D010			0x0D010
+#define HDMI_CORE_AUD_GP_STAT			0x0D40C
+#define HDMI_CORE_AUD_GP_INT			0x0D410
+#define HDMI_CORE_AUD_GP_POL			0x0D414
+#define HDMI_CORE_AUD_GP_MASK			0x0D418
+
+/* HDMI Main Controller */
+#define HDMI_CORE_MC_CLKDIS			0x10004
+#define HDMI_CORE_MC_SWRSTZREQ			0x10008
+#define HDMI_CORE_MC_FLOWCTRL			0x10010
+#define HDMI_CORE_MC_PHYRSTZ			0x10014
+#define HDMI_CORE_MC_LOCKONCLOCK		0x10018
+
+/* HDMI COLOR SPACE CONVERTER */
+#define HDMI_CORE_CSC_CFG			0x10400
+#define HDMI_CORE_CSC_SCALE			0x10404
+#define HDMI_CORE_CSC_COEF_A1_MSB		0x10408
+#define HDMI_CORE_CSC_COEF_A1_LSB		0x1040C
+#define HDMI_CORE_CSC_COEF_A2_MSB		0x10410
+#define HDMI_CORE_CSC_COEF_A2_LSB		0x10414
+#define HDMI_CORE_CSC_COEF_A3_MSB		0x10418
+#define HDMI_CORE_CSC_COEF_A3_LSB		0x1041C
+#define HDMI_CORE_CSC_COEF_A4_MSB		0x10420
+#define HDMI_CORE_CSC_COEF_A4_LSB		0x10424
+#define HDMI_CORE_CSC_COEF_B1_MSB		0x10428
+#define HDMI_CORE_CSC_COEF_B1_LSB		0x1042C
+#define HDMI_CORE_CSC_COEF_B2_MSB		0x10430
+#define HDMI_CORE_CSC_COEF_B2_LSB		0x10434
+#define HDMI_CORE_CSC_COEF_B3_MSB		0x10438
+#define HDMI_CORE_CSC_COEF_B3_LSB		0x1043C
+#define HDMI_CORE_CSC_COEF_B4_MSB		0x10440
+#define HDMI_CORE_CSC_COEF_B4_LSB		0x10444
+#define HDMI_CORE_CSC_COEF_C1_MSB		0x10448
+#define HDMI_CORE_CSC_COEF_C1_LSB		0x1044C
+#define HDMI_CORE_CSC_COEF_C2_MSB		0x10450
+#define HDMI_CORE_CSC_COEF_C2_LSB		0x10454
+#define HDMI_CORE_CSC_COEF_C3_MSB		0x10458
+#define HDMI_CORE_CSC_COEF_C3_LSB		0x1045C
+#define HDMI_CORE_CSC_COEF_C4_MSB		0x10460
+#define HDMI_CORE_CSC_COEF_C4_LSB		0x10464
+
+/* HDMI HDCP */
+#define HDMI_CORE_HDCP_MASK			0x14020
+
+/* HDMI CEC */
+#define HDMI_CORE_CEC_MASK			0x17408
+
+/* HDMI I2C Master */
+#define HDMI_CORE_I2CM_SLAVE			0x157C8
+#define HDMI_CORE_I2CM_ADDRESS			0x157CC
+#define HDMI_CORE_I2CM_DATAO			0x157D0
+#define HDMI_CORE_I2CM_DATAI			0X157D4
+#define HDMI_CORE_I2CM_OPERATION		0x157D8
+#define HDMI_CORE_I2CM_INT			0x157DC
+#define HDMI_CORE_I2CM_CTLINT			0x157E0
+#define HDMI_CORE_I2CM_DIV			0x157E4
+#define HDMI_CORE_I2CM_SEGADDR			0x157E8
+#define HDMI_CORE_I2CM_SOFTRSTZ			0x157EC
+#define HDMI_CORE_I2CM_SEGPTR			0x157F0
+#define HDMI_CORE_I2CM_SS_SCL_HCNT_1_ADDR	0x157F4
+#define HDMI_CORE_I2CM_SS_SCL_HCNT_0_ADDR	0x157F8
+#define HDMI_CORE_I2CM_SS_SCL_LCNT_1_ADDR	0x157FC
+#define HDMI_CORE_I2CM_SS_SCL_LCNT_0_ADDR	0x15800
+#define HDMI_CORE_I2CM_FS_SCL_HCNT_1_ADDR	0x15804
+#define HDMI_CORE_I2CM_FS_SCL_HCNT_0_ADDR	0x15808
+#define HDMI_CORE_I2CM_FS_SCL_LCNT_1_ADDR	0x1580C
+#define HDMI_CORE_I2CM_FS_SCL_LCNT_0_ADDR	0x15810
+#define HDMI_CORE_I2CM_SDA_HOLD_ADDR		0x15814
+
+enum hdmi_core_packet_mode {
+	HDMI_PACKETMODERESERVEDVALUE = 0,
+	HDMI_PACKETMODE24BITPERPIXEL = 4,
+	HDMI_PACKETMODE30BITPERPIXEL = 5,
+	HDMI_PACKETMODE36BITPERPIXEL = 6,
+	HDMI_PACKETMODE48BITPERPIXEL = 7,
+};
+
+struct hdmi_core_vid_config {
+	struct hdmi_config v_fc_config;
+	enum hdmi_core_packet_mode packet_mode;
+	int data_enable_pol;
+	int vblank_osc;
+	int hblank;
+	int vblank;
+};
+
+struct csc_table {
+	u16 a1, a2, a3, a4;
+	u16 b1, b2, b3, b4;
+	u16 c1, c2, c3, c4;
+};
+
+int hdmi5_read_edid(struct hdmi_core_data *core, u8 *edid, int len);
+void hdmi5_core_dump(struct hdmi_core_data *core, struct seq_file *s);
+int hdmi5_core_handle_irqs(struct hdmi_core_data *core);
+void hdmi5_configure(struct hdmi_core_data *core, struct hdmi_wp_data *wp,
+			struct hdmi_config *cfg);
+int hdmi5_core_init(struct platform_device *pdev, struct hdmi_core_data *core);
+
+#if defined(CONFIG_OMAP5_DSS_HDMI_AUDIO)
+int hdmi5_audio_config(struct hdmi_core_data *core, struct hdmi_wp_data *wp,
+			struct omap_dss_audio *audio, u32 pclk);
+#endif
+#endif
diff --git a/drivers/video/fbdev/omap2/dss/hdmi_common.c b/drivers/video/fbdev/omap2/dss/hdmi_common.c
index 0b12a3f62fe1..9a2c39cf297f 100644
--- a/drivers/video/fbdev/omap2/dss/hdmi_common.c
+++ b/drivers/video/fbdev/omap2/dss/hdmi_common.c
@@ -17,6 +17,7 @@
 
 #include <linux/kernel.h>
 #include <linux/err.h>
+#include <linux/of.h>
 #include <video/omapdss.h>
 
 #include "hdmi.h"
@@ -323,6 +324,46 @@ end:
 	return cm;
 }
 
+int hdmi_parse_lanes_of(struct platform_device *pdev, struct device_node *ep,
+	struct hdmi_phy_data *phy)
+{
+	struct property *prop;
+	int r, len;
+
+	prop = of_find_property(ep, "lanes", &len);
+	if (prop) {
+		u32 lanes[8];
+
+		if (len / sizeof(u32) != ARRAY_SIZE(lanes)) {
+			dev_err(&pdev->dev, "bad number of lanes\n");
+			return -EINVAL;
+		}
+
+		r = of_property_read_u32_array(ep, "lanes", lanes,
+			ARRAY_SIZE(lanes));
+		if (r) {
+			dev_err(&pdev->dev, "failed to read lane data\n");
+			return r;
+		}
+
+		r = hdmi_phy_parse_lanes(phy, lanes);
+		if (r) {
+			dev_err(&pdev->dev, "failed to parse lane data\n");
+			return r;
+		}
+	} else {
+		static const u32 default_lanes[] = { 0, 1, 2, 3, 4, 5, 6, 7 };
+
+		r = hdmi_phy_parse_lanes(phy, default_lanes);
+		if (WARN_ON(r)) {
+			dev_err(&pdev->dev, "failed to parse lane data\n");
+			return r;
+		}
+	}
+
+	return 0;
+}
+
 #if defined(CONFIG_OMAP4_DSS_HDMI_AUDIO)
 int hdmi_compute_acr(u32 pclk, u32 sample_freq, u32 *n, u32 *cts)
 {
diff --git a/drivers/video/fbdev/omap2/dss/hdmi_phy.c b/drivers/video/fbdev/omap2/dss/hdmi_phy.c
index dd376ce8da01..e007ac892d79 100644
--- a/drivers/video/fbdev/omap2/dss/hdmi_phy.c
+++ b/drivers/video/fbdev/omap2/dss/hdmi_phy.c
@@ -12,11 +12,22 @@
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/platform_device.h>
+#include <linux/slab.h>
 #include <video/omapdss.h>
 
 #include "dss.h"
 #include "hdmi.h"
 
+struct hdmi_phy_features {
+	bool bist_ctrl;
+	bool calc_freqout;
+	bool ldo_voltage;
+	unsigned long dcofreq_min;
+	unsigned long max_phy;
+};
+
+static const struct hdmi_phy_features *phy_feat;
+
 void hdmi_phy_dump(struct hdmi_phy_data *phy, struct seq_file *s)
 {
 #define DUMPPHY(r) seq_printf(s, "%-35s %08x\n", #r,\
@@ -26,53 +37,104 @@ void hdmi_phy_dump(struct hdmi_phy_data *phy, struct seq_file *s)
 	DUMPPHY(HDMI_TXPHY_DIGITAL_CTRL);
 	DUMPPHY(HDMI_TXPHY_POWER_CTRL);
 	DUMPPHY(HDMI_TXPHY_PAD_CFG_CTRL);
+	if (phy_feat->bist_ctrl)
+		DUMPPHY(HDMI_TXPHY_BIST_CONTROL);
 }
 
-static irqreturn_t hdmi_irq_handler(int irq, void *data)
+int hdmi_phy_parse_lanes(struct hdmi_phy_data *phy, const u32 *lanes)
 {
-	struct hdmi_wp_data *wp = data;
-	u32 irqstatus;
+	int i;
 
-	irqstatus = hdmi_wp_get_irqstatus(wp);
-	hdmi_wp_set_irqstatus(wp, irqstatus);
+	for (i = 0; i < 8; i += 2) {
+		u8 lane, pol;
+		int dx, dy;
 
-	if ((irqstatus & HDMI_IRQ_LINK_CONNECT) &&
-			irqstatus & HDMI_IRQ_LINK_DISCONNECT) {
-		/*
-		 * If we get both connect and disconnect interrupts at the same
-		 * time, turn off the PHY, clear interrupts, and restart, which
-		 * raises connect interrupt if a cable is connected, or nothing
-		 * if cable is not connected.
-		 */
-		hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_OFF);
+		dx = lanes[i];
+		dy = lanes[i + 1];
 
-		hdmi_wp_set_irqstatus(wp, HDMI_IRQ_LINK_CONNECT |
-				HDMI_IRQ_LINK_DISCONNECT);
+		if (dx < 0 || dx >= 8)
+			return -EINVAL;
 
-		hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_LDOON);
-	} else if (irqstatus & HDMI_IRQ_LINK_CONNECT) {
-		hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_TXON);
-	} else if (irqstatus & HDMI_IRQ_LINK_DISCONNECT) {
-		hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_LDOON);
+		if (dy < 0 || dy >= 8)
+			return -EINVAL;
+
+		if (dx & 1) {
+			if (dy != dx - 1)
+				return -EINVAL;
+			pol = 1;
+		} else {
+			if (dy != dx + 1)
+				return -EINVAL;
+			pol = 0;
+		}
+
+		lane = dx / 2;
+
+		phy->lane_function[lane] = i / 2;
+		phy->lane_polarity[lane] = pol;
 	}
 
-	return IRQ_HANDLED;
+	return 0;
 }
 
-int hdmi_phy_enable(struct hdmi_phy_data *phy, struct hdmi_wp_data *wp,
-			struct hdmi_config *cfg)
+static void hdmi_phy_configure_lanes(struct hdmi_phy_data *phy)
 {
-	u16 r = 0;
-	u32 irqstatus;
+	static const u16 pad_cfg_list[] = {
+		0x0123,
+		0x0132,
+		0x0312,
+		0x0321,
+		0x0231,
+		0x0213,
+		0x1023,
+		0x1032,
+		0x3012,
+		0x3021,
+		0x2031,
+		0x2013,
+		0x1203,
+		0x1302,
+		0x3102,
+		0x3201,
+		0x2301,
+		0x2103,
+		0x1230,
+		0x1320,
+		0x3120,
+		0x3210,
+		0x2310,
+		0x2130,
+	};
 
-	hdmi_wp_clear_irqenable(wp, 0xffffffff);
+	u16 lane_cfg = 0;
+	int i;
+	unsigned lane_cfg_val;
+	u16 pol_val = 0;
 
-	irqstatus = hdmi_wp_get_irqstatus(wp);
-	hdmi_wp_set_irqstatus(wp, irqstatus);
+	for (i = 0; i < 4; ++i)
+		lane_cfg |= phy->lane_function[i] << ((3 - i) * 4);
 
-	r = hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_LDOON);
-	if (r)
-		return r;
+	pol_val |= phy->lane_polarity[0] << 0;
+	pol_val |= phy->lane_polarity[1] << 3;
+	pol_val |= phy->lane_polarity[2] << 2;
+	pol_val |= phy->lane_polarity[3] << 1;
+
+	for (i = 0; i < ARRAY_SIZE(pad_cfg_list); ++i)
+		if (pad_cfg_list[i] == lane_cfg)
+			break;
+
+	if (WARN_ON(i == ARRAY_SIZE(pad_cfg_list)))
+		i = 0;
+
+	lane_cfg_val = i;
+
+	REG_FLD_MOD(phy->base, HDMI_TXPHY_PAD_CFG_CTRL, lane_cfg_val, 26, 22);
+	REG_FLD_MOD(phy->base, HDMI_TXPHY_PAD_CFG_CTRL, pol_val, 30, 27);
+}
+
+int hdmi_phy_configure(struct hdmi_phy_data *phy, struct hdmi_config *cfg)
+{
+	u8 freqout;
 
 	/*
 	 * Read address 0 in order to get the SCP reset done completed
@@ -80,81 +142,114 @@ int hdmi_phy_enable(struct hdmi_phy_data *phy, struct hdmi_wp_data *wp,
 	 */
 	hdmi_read_reg(phy->base, HDMI_TXPHY_TX_CTRL);
 
+	/*
+	 * In OMAP5+, the HFBITCLK must be divided by 2 before issuing the
+	 * HDMI_PHYPWRCMD_LDOON command.
+	*/
+	if (phy_feat->bist_ctrl)
+		REG_FLD_MOD(phy->base, HDMI_TXPHY_BIST_CONTROL, 1, 11, 11);
+
+	if (phy_feat->calc_freqout) {
+		/* DCOCLK/10 is pixel clock, compare pclk with DCOCLK_MIN/10 */
+		u32 dco_min = phy_feat->dcofreq_min / 10;
+		u32 pclk = cfg->timings.pixelclock;
+
+		if (pclk < dco_min)
+			freqout = 0;
+		else if ((pclk >= dco_min) && (pclk < phy_feat->max_phy))
+			freqout = 1;
+		else
+			freqout = 2;
+	} else {
+		freqout = 1;
+	}
+
 	/*
 	 * Write to phy address 0 to configure the clock
 	 * use HFBITCLK write HDMI_TXPHY_TX_CONTROL_FREQOUT field
 	 */
-	REG_FLD_MOD(phy->base, HDMI_TXPHY_TX_CTRL, 0x1, 31, 30);
+	REG_FLD_MOD(phy->base, HDMI_TXPHY_TX_CTRL, freqout, 31, 30);
 
 	/* Write to phy address 1 to start HDMI line (TXVALID and TMDSCLKEN) */
 	hdmi_write_reg(phy->base, HDMI_TXPHY_DIGITAL_CTRL, 0xF0000000);
 
 	/* Setup max LDO voltage */
-	REG_FLD_MOD(phy->base, HDMI_TXPHY_POWER_CTRL, 0xB, 3, 0);
+	if (phy_feat->ldo_voltage)
+		REG_FLD_MOD(phy->base, HDMI_TXPHY_POWER_CTRL, 0xB, 3, 0);
 
-	/* Write to phy address 3 to change the polarity control */
-	REG_FLD_MOD(phy->base, HDMI_TXPHY_PAD_CFG_CTRL, 0x1, 27, 27);
-
-	r = request_threaded_irq(phy->irq, NULL, hdmi_irq_handler,
-				IRQF_ONESHOT, "OMAP HDMI", wp);
-	if (r) {
-		DSSERR("HDMI IRQ request failed\n");
-		hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_OFF);
-		return r;
-	}
-
-	hdmi_wp_set_irqenable(wp,
-		HDMI_IRQ_LINK_CONNECT | HDMI_IRQ_LINK_DISCONNECT);
+	hdmi_phy_configure_lanes(phy);
 
 	return 0;
 }
 
-void hdmi_phy_disable(struct hdmi_phy_data *phy, struct hdmi_wp_data *wp)
+static const struct hdmi_phy_features omap44xx_phy_feats = {
+	.bist_ctrl	=	false,
+	.calc_freqout	=	false,
+	.ldo_voltage	=	true,
+	.dcofreq_min	=	500000000,
+	.max_phy	=	185675000,
+};
+
+static const struct hdmi_phy_features omap54xx_phy_feats = {
+	.bist_ctrl	=	true,
+	.calc_freqout	=	true,
+	.ldo_voltage	=	false,
+	.dcofreq_min	=	750000000,
+	.max_phy	=	186000000,
+};
+
+static int hdmi_phy_init_features(struct platform_device *pdev)
 {
-	free_irq(phy->irq, wp);
+	struct hdmi_phy_features *dst;
+	const struct hdmi_phy_features *src;
 
-	hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_OFF);
-}
-
-#define PHY_OFFSET	0x300
-#define PHY_SIZE	0x100
-
-int hdmi_phy_init(struct platform_device *pdev, struct hdmi_phy_data *phy)
-{
-	struct resource *res;
-	struct resource temp_res;
-
-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy");
-	if (!res) {
-		DSSDBG("can't get PHY mem resource by name\n");
-		/*
-		 * if hwmod/DT doesn't have the memory resource information
-		 * split into HDMI sub blocks by name, we try again by getting
-		 * the platform's first resource. this code will be removed when
-		 * the driver can get the mem resources by name
-		 */
-		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-		if (!res) {
-			DSSERR("can't get PHY mem resource\n");
-			return -EINVAL;
-		}
-
-		temp_res.start = res->start + PHY_OFFSET;
-		temp_res.end = temp_res.start + PHY_SIZE - 1;
-		res = &temp_res;
-	}
-
-	phy->base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
-	if (!phy->base) {
-		DSSERR("can't ioremap TX PHY\n");
+	dst = devm_kzalloc(&pdev->dev, sizeof(*dst), GFP_KERNEL);
+	if (!dst) {
+		dev_err(&pdev->dev, "Failed to allocate HDMI PHY Features\n");
 		return -ENOMEM;
 	}
 
-	phy->irq = platform_get_irq(pdev, 0);
-	if (phy->irq < 0) {
-		DSSERR("platform_get_irq failed\n");
+	switch (omapdss_get_version()) {
+	case OMAPDSS_VER_OMAP4430_ES1:
+	case OMAPDSS_VER_OMAP4430_ES2:
+	case OMAPDSS_VER_OMAP4:
+		src = &omap44xx_phy_feats;
+		break;
+
+	case OMAPDSS_VER_OMAP5:
+		src = &omap54xx_phy_feats;
+		break;
+
+	default:
 		return -ENODEV;
 	}
 
+	memcpy(dst, src, sizeof(*dst));
+	phy_feat = dst;
+
+	return 0;
+}
+
+int hdmi_phy_init(struct platform_device *pdev, struct hdmi_phy_data *phy)
+{
+	int r;
+	struct resource *res;
+
+	r = hdmi_phy_init_features(pdev);
+	if (r)
+		return r;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy");
+	if (!res) {
+		DSSERR("can't get PHY mem resource\n");
+		return -EINVAL;
+	}
+
+	phy->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(phy->base)) {
+		DSSERR("can't ioremap TX PHY\n");
+		return PTR_ERR(phy->base);
+	}
+
 	return 0;
 }
diff --git a/drivers/video/fbdev/omap2/dss/hdmi_pll.c b/drivers/video/fbdev/omap2/dss/hdmi_pll.c
index 5fc71215c303..54df12a8d744 100644
--- a/drivers/video/fbdev/omap2/dss/hdmi_pll.c
+++ b/drivers/video/fbdev/omap2/dss/hdmi_pll.c
@@ -23,6 +23,18 @@
 #define HDMI_DEFAULT_REGN 16
 #define HDMI_DEFAULT_REGM2 1
 
+struct hdmi_pll_features {
+	bool sys_reset;
+	/* this is a hack, need to replace it with a better computation of M2 */
+	bool bound_dcofreq;
+	unsigned long fint_min, fint_max;
+	u16 regm_max;
+	unsigned long dcofreq_low_min, dcofreq_low_max;
+	unsigned long dcofreq_high_min, dcofreq_high_max;
+};
+
+static const struct hdmi_pll_features *pll_feat;
+
 void hdmi_pll_dump(struct hdmi_pll_data *pll, struct seq_file *s)
 {
 #define DUMPPLL(r) seq_printf(s, "%-35s %08x\n", #r,\
@@ -57,7 +69,11 @@ void hdmi_pll_compute(struct hdmi_pll_data *pll, unsigned long clkin, int phy)
 
 	refclk = clkin / pi->regn;
 
-	pi->regm2 = HDMI_DEFAULT_REGM2;
+	/* temorary hack to make sure DCO freq isn't calculated too low */
+	if (pll_feat->bound_dcofreq && phy <= 65000)
+		pi->regm2 = 3;
+	else
+		pi->regm2 = HDMI_DEFAULT_REGM2;
 
 	/*
 	 * multiplier is pixel_clk/ref_clk
@@ -154,7 +170,7 @@ static int hdmi_pll_config(struct hdmi_pll_data *pll)
 static int hdmi_pll_reset(struct hdmi_pll_data *pll)
 {
 	/* SYSRESET  controlled by power FSM */
-	REG_FLD_MOD(pll->base, PLLCTRL_PLL_CONTROL, 0x0, 3, 3);
+	REG_FLD_MOD(pll->base, PLLCTRL_PLL_CONTROL, pll_feat->sys_reset, 3, 3);
 
 	/* READ 0x0 reset is in progress */
 	if (hdmi_wait_for_bit_change(pll->base, PLLCTRL_PLL_STATUS, 0, 0, 1)
@@ -194,38 +210,81 @@ void hdmi_pll_disable(struct hdmi_pll_data *pll, struct hdmi_wp_data *wp)
 	hdmi_wp_set_pll_pwr(wp, HDMI_PLLPWRCMD_ALLOFF);
 }
 
-#define PLL_OFFSET	0x200
-#define PLL_SIZE	0x100
+static const struct hdmi_pll_features omap44xx_pll_feats = {
+	.sys_reset		=	false,
+	.bound_dcofreq		=	false,
+	.fint_min		=	500000,
+	.fint_max		=	2500000,
+	.regm_max		=	4095,
+	.dcofreq_low_min	=	500000000,
+	.dcofreq_low_max	=	1000000000,
+	.dcofreq_high_min	=	1000000000,
+	.dcofreq_high_max	=	2000000000,
+};
+
+static const struct hdmi_pll_features omap54xx_pll_feats = {
+	.sys_reset		=	true,
+	.bound_dcofreq		=	true,
+	.fint_min		=	620000,
+	.fint_max		=	2500000,
+	.regm_max		=	2046,
+	.dcofreq_low_min	=	750000000,
+	.dcofreq_low_max	=	1500000000,
+	.dcofreq_high_min	=	1250000000,
+	.dcofreq_high_max	=	2500000000UL,
+};
+
+static int hdmi_pll_init_features(struct platform_device *pdev)
+{
+	struct hdmi_pll_features *dst;
+	const struct hdmi_pll_features *src;
+
+	dst = devm_kzalloc(&pdev->dev, sizeof(*dst), GFP_KERNEL);
+	if (!dst) {
+		dev_err(&pdev->dev, "Failed to allocate HDMI PHY Features\n");
+		return -ENOMEM;
+	}
+
+	switch (omapdss_get_version()) {
+	case OMAPDSS_VER_OMAP4430_ES1:
+	case OMAPDSS_VER_OMAP4430_ES2:
+	case OMAPDSS_VER_OMAP4:
+		src = &omap44xx_pll_feats;
+		break;
+
+	case OMAPDSS_VER_OMAP5:
+		src = &omap54xx_pll_feats;
+		break;
+
+	default:
+		return -ENODEV;
+	}
+
+	memcpy(dst, src, sizeof(*dst));
+	pll_feat = dst;
+
+	return 0;
+}
 
 int hdmi_pll_init(struct platform_device *pdev, struct hdmi_pll_data *pll)
 {
+	int r;
 	struct resource *res;
-	struct resource temp_res;
+
+	r = hdmi_pll_init_features(pdev);
+	if (r)
+		return r;
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pll");
 	if (!res) {
-		DSSDBG("can't get PLL mem resource by name\n");
-		/*
-		 * if hwmod/DT doesn't have the memory resource information
-		 * split into HDMI sub blocks by name, we try again by getting
-		 * the platform's first resource. this code will be removed when
-		 * the driver can get the mem resources by name
-		 */
-		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-		if (!res) {
-			DSSERR("can't get PLL mem resource\n");
-			return -EINVAL;
-		}
-
-		temp_res.start = res->start + PLL_OFFSET;
-		temp_res.end = temp_res.start + PLL_SIZE - 1;
-		res = &temp_res;
+		DSSERR("can't get PLL mem resource\n");
+		return -EINVAL;
 	}
 
-	pll->base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
-	if (!pll->base) {
+	pll->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(pll->base)) {
 		DSSERR("can't ioremap PLLCTRL\n");
-		return -ENOMEM;
+		return PTR_ERR(pll->base);
 	}
 
 	return 0;
diff --git a/drivers/video/fbdev/omap2/dss/hdmi_wp.c b/drivers/video/fbdev/omap2/dss/hdmi_wp.c
index f5f4ccf50d90..496327e2b21b 100644
--- a/drivers/video/fbdev/omap2/dss/hdmi_wp.c
+++ b/drivers/video/fbdev/omap2/dss/hdmi_wp.c
@@ -185,7 +185,7 @@ void hdmi_wp_init_vid_fmt_timings(struct hdmi_video_format *video_fmt,
 	timings->interlace = param->timings.interlace;
 }
 
-#if defined(CONFIG_OMAP4_DSS_HDMI_AUDIO)
+#if defined(CONFIG_OMAP4_DSS_HDMI_AUDIO) || defined(CONFIG_OMAP5_DSS_HDMI_AUDIO)
 void hdmi_wp_audio_config_format(struct hdmi_wp_data *wp,
 		struct hdmi_audio_format *aud_fmt)
 {
@@ -238,37 +238,20 @@ int hdmi_wp_audio_core_req_enable(struct hdmi_wp_data *wp, bool enable)
 }
 #endif
 
-#define WP_SIZE	0x200
-
 int hdmi_wp_init(struct platform_device *pdev, struct hdmi_wp_data *wp)
 {
 	struct resource *res;
-	struct resource temp_res;
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "wp");
 	if (!res) {
-		DSSDBG("can't get WP mem resource by name\n");
-		/*
-		 * if hwmod/DT doesn't have the memory resource information
-		 * split into HDMI sub blocks by name, we try again by getting
-		 * the platform's first resource. this code will be removed when
-		 * the driver can get the mem resources by name
-		 */
-		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-		if (!res) {
-			DSSERR("can't get WP mem resource\n");
-			return -EINVAL;
-		}
-
-		temp_res.start = res->start;
-		temp_res.end = temp_res.start + WP_SIZE - 1;
-		res = &temp_res;
+		DSSERR("can't get WP mem resource\n");
+		return -EINVAL;
 	}
 
-	wp->base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
-	if (!wp->base) {
+	wp->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(wp->base)) {
 		DSSERR("can't ioremap HDMI WP\n");
-		return -ENOMEM;
+		return PTR_ERR(wp->base);
 	}
 
 	return 0;
diff --git a/drivers/video/fbdev/omap2/dss/omapdss-boot-init.c b/drivers/video/fbdev/omap2/dss/omapdss-boot-init.c
new file mode 100644
index 000000000000..99af9e88b2d8
--- /dev/null
+++ b/drivers/video/fbdev/omap2/dss/omapdss-boot-init.c
@@ -0,0 +1,229 @@
+/*
+ * Copyright (C) 2014 Texas Instruments
+ * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/*
+ * As omapdss panel drivers are omapdss specific, but we want to define the
+ * DT-data in generic manner, we convert the compatible strings of the panel and
+ * encoder nodes from "panel-foo" to "omapdss,panel-foo". This way we can have
+ * both correct DT data and omapdss specific drivers.
+ *
+ * When we get generic panel drivers to the kernel, this file will be removed.
+ */
+
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_graph.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+
+static struct list_head dss_conv_list __initdata;
+
+static const char prefix[] __initconst = "omapdss,";
+
+struct dss_conv_node {
+	struct list_head list;
+	struct device_node *node;
+	bool root;
+};
+
+static int __init omapdss_count_strings(const struct property *prop)
+{
+	const char *p = prop->value;
+	int l = 0, total = 0;
+	int i;
+
+	for (i = 0; total < prop->length; total += l, p += l, i++)
+		l = strlen(p) + 1;
+
+	return i;
+}
+
+static void __init omapdss_update_prop(struct device_node *node, char *compat,
+	int len)
+{
+	struct property *prop;
+
+	prop = kzalloc(sizeof(*prop), GFP_KERNEL);
+	if (!prop)
+		return;
+
+	prop->name = "compatible";
+	prop->value = compat;
+	prop->length = len;
+
+	of_update_property(node, prop);
+}
+
+static void __init omapdss_prefix_strcpy(char *dst, int dst_len,
+	const char *src, int src_len)
+{
+	size_t total = 0;
+
+	while (total < src_len) {
+		size_t l = strlen(src) + 1;
+
+		strcpy(dst, prefix);
+		dst += strlen(prefix);
+
+		strcpy(dst, src);
+		dst += l;
+
+		src += l;
+		total += l;
+	}
+}
+
+/* prepend compatible property strings with "omapdss," */
+static void __init omapdss_omapify_node(struct device_node *node)
+{
+	struct property *prop;
+	char *new_compat;
+	int num_strs;
+	int new_len;
+
+	prop = of_find_property(node, "compatible", NULL);
+
+	if (!prop || !prop->value)
+		return;
+
+	if (strnlen(prop->value, prop->length) >= prop->length)
+		return;
+
+	/* is it already prefixed? */
+	if (strncmp(prefix, prop->value, strlen(prefix)) == 0)
+		return;
+
+	num_strs = omapdss_count_strings(prop);
+
+	new_len = prop->length + strlen(prefix) * num_strs;
+	new_compat = kmalloc(new_len, GFP_KERNEL);
+
+	omapdss_prefix_strcpy(new_compat, new_len, prop->value, prop->length);
+
+	omapdss_update_prop(node, new_compat, new_len);
+}
+
+static void __init omapdss_add_to_list(struct device_node *node, bool root)
+{
+	struct dss_conv_node *n = kmalloc(sizeof(struct dss_conv_node),
+		GFP_KERNEL);
+	n->node = node;
+	n->root = root;
+	list_add(&n->list, &dss_conv_list);
+}
+
+static bool __init omapdss_list_contains(const struct device_node *node)
+{
+	struct dss_conv_node *n;
+
+	list_for_each_entry(n, &dss_conv_list, list) {
+		if (n->node == node)
+			return true;
+	}
+
+	return false;
+}
+
+static void __init omapdss_walk_device(struct device_node *node, bool root)
+{
+	struct device_node *n;
+
+	omapdss_add_to_list(node, root);
+
+	/*
+	 * of_graph_get_remote_port_parent() prints an error if there is no
+	 * port/ports node. To avoid that, check first that there's the node.
+	 */
+	n = of_get_child_by_name(node, "ports");
+	if (!n)
+		n = of_get_child_by_name(node, "port");
+	if (!n)
+		return;
+
+	of_node_put(n);
+
+	n = NULL;
+	while ((n = of_graph_get_next_endpoint(node, n)) != NULL) {
+		struct device_node *pn;
+
+		pn = of_graph_get_remote_port_parent(n);
+
+		if (!pn) {
+			of_node_put(n);
+			continue;
+		}
+
+		if (!of_device_is_available(pn) || omapdss_list_contains(pn)) {
+			of_node_put(pn);
+			of_node_put(n);
+			continue;
+		}
+
+		omapdss_walk_device(pn, false);
+
+		of_node_put(n);
+	}
+}
+
+static const struct of_device_id omapdss_of_match[] __initconst = {
+	{ .compatible = "ti,omap2-dss", },
+	{ .compatible = "ti,omap3-dss", },
+	{ .compatible = "ti,omap4-dss", },
+	{ .compatible = "ti,omap5-dss", },
+	{},
+};
+
+static int __init omapdss_boot_init(void)
+{
+	struct device_node *dss, *child;
+
+	INIT_LIST_HEAD(&dss_conv_list);
+
+	dss = of_find_matching_node(NULL, omapdss_of_match);
+
+	if (dss == NULL || !of_device_is_available(dss))
+		return 0;
+
+	omapdss_walk_device(dss, true);
+
+	for_each_available_child_of_node(dss, child) {
+		if (!of_find_property(child, "compatible", NULL)) {
+			of_node_put(child);
+			continue;
+		}
+
+		omapdss_walk_device(child, true);
+	}
+
+	while (!list_empty(&dss_conv_list)) {
+		struct dss_conv_node *n;
+
+		n = list_first_entry(&dss_conv_list, struct dss_conv_node,
+			list);
+
+		if (!n->root)
+			omapdss_omapify_node(n->node);
+
+		list_del(&n->list);
+		of_node_put(n->node);
+		kfree(n);
+	}
+
+	return 0;
+}
+
+subsys_initcall(omapdss_boot_init);
diff --git a/drivers/video/fbdev/omap2/dss/venc_panel.c b/drivers/video/fbdev/omap2/dss/venc_panel.c
deleted file mode 100644
index af68cd444d7e..000000000000
--- a/drivers/video/fbdev/omap2/dss/venc_panel.c
+++ /dev/null
@@ -1,232 +0,0 @@
-/*
- * Copyright (C) 2009 Nokia Corporation
- * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
- *
- * VENC panel driver
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/mutex.h>
-#include <linux/module.h>
-
-#include <video/omapdss.h>
-
-#include "dss.h"
-
-static struct {
-	struct mutex lock;
-} venc_panel;
-
-static ssize_t display_output_type_show(struct device *dev,
-		struct device_attribute *attr, char *buf)
-{
-	struct omap_dss_device *dssdev = to_dss_device(dev);
-	const char *ret;
-
-	switch (dssdev->phy.venc.type) {
-	case OMAP_DSS_VENC_TYPE_COMPOSITE:
-		ret = "composite";
-		break;
-	case OMAP_DSS_VENC_TYPE_SVIDEO:
-		ret = "svideo";
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return snprintf(buf, PAGE_SIZE, "%s\n", ret);
-}
-
-static ssize_t display_output_type_store(struct device *dev,
-		struct device_attribute *attr, const char *buf, size_t size)
-{
-	struct omap_dss_device *dssdev = to_dss_device(dev);
-	enum omap_dss_venc_type new_type;
-
-	if (sysfs_streq("composite", buf))
-		new_type = OMAP_DSS_VENC_TYPE_COMPOSITE;
-	else if (sysfs_streq("svideo", buf))
-		new_type = OMAP_DSS_VENC_TYPE_SVIDEO;
-	else
-		return -EINVAL;
-
-	mutex_lock(&venc_panel.lock);
-
-	if (dssdev->phy.venc.type != new_type) {
-		dssdev->phy.venc.type = new_type;
-		omapdss_venc_set_type(dssdev, new_type);
-		if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) {
-			omapdss_venc_display_disable(dssdev);
-			omapdss_venc_display_enable(dssdev);
-		}
-	}
-
-	mutex_unlock(&venc_panel.lock);
-
-	return size;
-}
-
-static DEVICE_ATTR(output_type, S_IRUGO | S_IWUSR,
-		display_output_type_show, display_output_type_store);
-
-static int venc_panel_probe(struct omap_dss_device *dssdev)
-{
-	/* set default timings to PAL */
-	const struct omap_video_timings default_timings = {
-		.x_res		= 720,
-		.y_res		= 574,
-		.pixelclock	= 13500000,
-		.hsw		= 64,
-		.hfp		= 12,
-		.hbp		= 68,
-		.vsw		= 5,
-		.vfp		= 5,
-		.vbp		= 41,
-
-		.vsync_level	= OMAPDSS_SIG_ACTIVE_HIGH,
-		.hsync_level	= OMAPDSS_SIG_ACTIVE_HIGH,
-
-		.interlace	= true,
-	};
-
-	mutex_init(&venc_panel.lock);
-
-	dssdev->panel.timings = default_timings;
-
-	return device_create_file(dssdev->dev, &dev_attr_output_type);
-}
-
-static void venc_panel_remove(struct omap_dss_device *dssdev)
-{
-	device_remove_file(dssdev->dev, &dev_attr_output_type);
-}
-
-static int venc_panel_enable(struct omap_dss_device *dssdev)
-{
-	int r;
-
-	dev_dbg(dssdev->dev, "venc_panel_enable\n");
-
-	mutex_lock(&venc_panel.lock);
-
-	if (dssdev->state != OMAP_DSS_DISPLAY_DISABLED) {
-		r = -EINVAL;
-		goto err;
-	}
-
-	omapdss_venc_set_timings(dssdev, &dssdev->panel.timings);
-	omapdss_venc_set_type(dssdev, dssdev->phy.venc.type);
-	omapdss_venc_invert_vid_out_polarity(dssdev,
-		dssdev->phy.venc.invert_polarity);
-
-	r = omapdss_venc_display_enable(dssdev);
-	if (r)
-		goto err;
-
-	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
-	mutex_unlock(&venc_panel.lock);
-
-	return 0;
-err:
-	mutex_unlock(&venc_panel.lock);
-
-	return r;
-}
-
-static void venc_panel_disable(struct omap_dss_device *dssdev)
-{
-	dev_dbg(dssdev->dev, "venc_panel_disable\n");
-
-	mutex_lock(&venc_panel.lock);
-
-	if (dssdev->state == OMAP_DSS_DISPLAY_DISABLED)
-		goto end;
-
-	omapdss_venc_display_disable(dssdev);
-
-	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
-end:
-	mutex_unlock(&venc_panel.lock);
-}
-
-static void venc_panel_set_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	dev_dbg(dssdev->dev, "venc_panel_set_timings\n");
-
-	mutex_lock(&venc_panel.lock);
-
-	omapdss_venc_set_timings(dssdev, timings);
-	dssdev->panel.timings = *timings;
-
-	mutex_unlock(&venc_panel.lock);
-}
-
-static int venc_panel_check_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	dev_dbg(dssdev->dev, "venc_panel_check_timings\n");
-
-	return omapdss_venc_check_timings(dssdev, timings);
-}
-
-static u32 venc_panel_get_wss(struct omap_dss_device *dssdev)
-{
-	dev_dbg(dssdev->dev, "venc_panel_get_wss\n");
-
-	return omapdss_venc_get_wss(dssdev);
-}
-
-static int venc_panel_set_wss(struct omap_dss_device *dssdev, u32 wss)
-{
-	dev_dbg(dssdev->dev, "venc_panel_set_wss\n");
-
-	return omapdss_venc_set_wss(dssdev, wss);
-}
-
-static struct omap_dss_driver venc_driver = {
-	.probe		= venc_panel_probe,
-	.remove		= venc_panel_remove,
-
-	.enable		= venc_panel_enable,
-	.disable	= venc_panel_disable,
-
-	.get_resolution	= omapdss_default_get_resolution,
-	.get_recommended_bpp = omapdss_default_get_recommended_bpp,
-
-	.set_timings	= venc_panel_set_timings,
-	.check_timings	= venc_panel_check_timings,
-
-	.get_wss	= venc_panel_get_wss,
-	.set_wss	= venc_panel_set_wss,
-
-	.driver         = {
-		.name   = "venc",
-		.owner  = THIS_MODULE,
-	},
-};
-
-int venc_panel_init(void)
-{
-	return omap_dss_register_driver(&venc_driver);
-}
-
-void venc_panel_exit(void)
-{
-	omap_dss_unregister_driver(&venc_driver);
-}
diff --git a/include/video/omapdss.h b/include/video/omapdss.h
index 6adb44534606..fc06c5b5f12a 100644
--- a/include/video/omapdss.h
+++ b/include/video/omapdss.h
@@ -319,6 +319,7 @@ enum omapdss_version {
 	OMAPDSS_VER_OMAP4430_ES2,	/* OMAP4430 ES2.0, 2.1, 2.2 */
 	OMAPDSS_VER_OMAP4,		/* All other OMAP4s */
 	OMAPDSS_VER_OMAP5,
+	OMAPDSS_VER_AM43xx,
 };
 
 /* Board specific data */
@@ -388,8 +389,8 @@ struct omap_dss_cpr_coefs {
 };
 
 struct omap_overlay_info {
-	u32 paddr;
-	u32 p_uv_addr;  /* for NV12 format */
+	dma_addr_t paddr;
+	dma_addr_t p_uv_addr;  /* for NV12 format */
 	u16 screen_width;
 	u16 width;
 	u16 height;
@@ -964,9 +965,6 @@ int dispc_ovl_setup(enum omap_plane plane, const struct omap_overlay_info *oi,
 		bool replication, const struct omap_video_timings *mgr_timings,
 		bool mem_to_mem);
 
-#define to_dss_driver(x) container_of((x), struct omap_dss_driver, driver)
-#define to_dss_device(x) container_of((x), struct omap_dss_device, old_dev)
-
 int omapdss_compat_init(void);
 void omapdss_compat_uninit(void);