usb: typec: tcpm: Fix sink caps op current check
TCPM checks for sink caps operational current even when PD is disabled. This incorrectly sets tcpm_set_charge() when PD is disabled. Check for sink caps only when PD is enabled. [ 97.572342] Start toggling [ 97.578949] CC1: 0 -> 0, CC2: 0 -> 0 [state TOGGLING, polarity 0, disconnected] [ 99.571648] CC1: 0 -> 0, CC2: 0 -> 4 [state TOGGLING, polarity 0, connected] [ 99.571658] state change TOGGLING -> SNK_ATTACH_WAIT [rev3 NONE_AMS] [ 99.571673] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev3 NONE_AMS] [ 99.741778] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 170 ms] [ 99.789283] CC1: 0 -> 0, CC2: 4 -> 5 [state SNK_DEBOUNCED, polarity 0, connected] [ 99.789306] state change SNK_DEBOUNCED -> SNK_DEBOUNCED [rev3 NONE_AMS] [ 99.903584] VBUS on [ 99.903591] state change SNK_DEBOUNCED -> SNK_ATTACHED [rev3 NONE_AMS] [ 99.903600] polarity 1 [ 99.910155] enable vbus discharge ret:0 [ 99.910160] Requesting mux state 1, usb-role 2, orientation 2 [ 99.946791] state change SNK_ATTACHED -> SNK_STARTUP [rev3 NONE_AMS] [ 99.946798] state change SNK_STARTUP -> SNK_DISCOVERY [rev3 NONE_AMS] [ 99.946800] Setting voltage/current limit 5000 mV 500 mA [ 99.946803] vbus=0 charge:=1 [ 100.027139] state change SNK_DISCOVERY -> SNK_READY [rev3 NONE_AMS] [ 100.027145] Setting voltage/current limit 5000 mV 3000 mA [ 100.466830] VBUS on Cc: stable@vger.kernel.org Fixes: 803b1c8a0cea ("usb: typec: tcpm: not sink vbus if operational current is 0mA") Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Tested-by: Will McVicker <willmcvicker@google.com> Link: https://lore.kernel.org/r/20231101012845.2701348-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
parent
10d510abd0
commit
187fb003c5
@ -4273,7 +4273,8 @@ static void run_state_machine(struct tcpm_port *port)
|
||||
current_lim = PD_P_SNK_STDBY_MW / 5;
|
||||
tcpm_set_current_limit(port, current_lim, 5000);
|
||||
/* Not sink vbus if operational current is 0mA */
|
||||
tcpm_set_charge(port, !!pdo_max_current(port->snk_pdo[0]));
|
||||
tcpm_set_charge(port, !port->pd_supported ||
|
||||
pdo_max_current(port->snk_pdo[0]));
|
||||
|
||||
if (!port->pd_supported)
|
||||
tcpm_set_state(port, SNK_READY, 0);
|
||||
|
Loading…
x
Reference in New Issue
Block a user