iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

net: phy: correct format of block comments

Browse Source 
Block comments should not use a trailing */ on a separate line and every
line of a block comment should start with an '*'.

Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Wenpeng Liang 2021-06-16 18:01:20 +08:00 committed by David S. Miller
parent 775f25479d
commit 1953feb022
5 changed files with 16 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
drivers/net/phy/lxt.c
View File

@ -242,8 +242,8 @@ static int lxt973a2_read_status(struct phy_device *phydev)
return lpa;
/* If both registers are equal, it is suspect but not
* impossible, hence a new try
*/
* impossible, hence a new try
*/
} while (lpa == adv && retry--);
mii_lpa_to_linkmode_lpa_t(phydev->lp_advertising, lpa);

6
drivers/net/phy/national.c
View File

@ -68,7 +68,8 @@ static int ns_ack_interrupt(struct phy_device *phydev)
return ret;
/* Clear the interrupt status bit by writing a “1”
* to the corresponding bit in INT_CLEAR (2:0 are reserved) */
* to the corresponding bit in INT_CLEAR (2:0 are reserved)
*/
ret = phy_write(phydev, DP83865_INT_CLEAR, ret & ~0x7);
return ret;
@ -150,7 +151,8 @@ static int ns_config_init(struct phy_device *phydev)
{
ns_giga_speed_fallback(phydev, ALL_FALLBACK_ON);
/* In the latest MAC or switches design, the 10 Mbps loopback
is desired to be turned off. */
* is desired to be turned off.
*/
ns_10_base_t_hdx_loopack(phydev, hdx_loopback_off);
return ns_ack_interrupt(phydev);
}

3
drivers/net/phy/phy-core.c
View File

@ -76,7 +76,8 @@ EXPORT_SYMBOL_GPL(phy_duplex_to_str);
/* A mapping of all SUPPORTED settings to speed/duplex. This table
* must be grouped by speed and sorted in descending match priority
* - iow, descending speed. */
* - iow, descending speed.
*/
#define PHY_SETTING(s, d, b) { .speed = SPEED_ ## s, .duplex = DUPLEX_ ## d, \
.bit = ETHTOOL_LINK_MODE_ ## b ## _BIT}

9
drivers/net/phy/phylink.c
View File

@ -182,7 +182,8 @@ static int phylink_parse_fixedlink(struct phylink *pl,
pl->link_config.duplex = DUPLEX_FULL;
/* We treat the "pause" and "asym-pause" terminology as
* defining the link partner's ability. */
* defining the link partner's ability.
*/
if (fwnode_property_read_bool(fixed_node, "pause"))
__set_bit(ETHTOOL_LINK_MODE_Pause_BIT,
pl->link_config.lp_advertising);
@ -685,7 +686,8 @@ static void phylink_resolve(struct work_struct *w)
phylink_mac_pcs_get_state(pl, &link_state);
/* If we have a phy, the "up" state is the union of
* both the PHY and the MAC */
* both the PHY and the MAC
*/
if (pl->phydev)
link_state.link &= pl->phy_state.link;
@ -694,7 +696,8 @@ static void phylink_resolve(struct work_struct *w)
link_state.interface = pl->phy_state.interface;
/* If we have a PHY, we need to update with
* the PHY flow control bits. */
* the PHY flow control bits.
*/
link_state.pause = pl->phy_state.pause;
mac_config = true;
}

3
drivers/net/phy/vitesse.c
View File

@ -249,7 +249,8 @@ static int vsc73xx_config_aneg(struct phy_device *phydev)
/* This adds a skew for both TX and RX clocks, so the skew should only be
* applied to "rgmii-id" interfaces. It may not work as expected
* on "rgmii-txid", "rgmii-rxid" or "rgmii" interfaces. */
* on "rgmii-txid", "rgmii-rxid" or "rgmii" interfaces.
*/
static int vsc8601_add_skew(struct phy_device *phydev)
{
int ret;