From d298caae9a920e1745599ddd4a19073d9a033df0 Mon Sep 17 00:00:00 2001 From: Liam Girdwood Date: Fri, 1 Jun 2012 18:03:00 +0100 Subject: [PATCH 01/30] ASoC: dapm: Fix connected widget capture path query. Make sure we check the correct path for capture. Signed-off-by: Liam Girdwood Signed-off-by: Mark Brown --- sound/soc/soc-dapm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index 90ee77d2409d..b47fe75444ac 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -954,7 +954,7 @@ int snd_soc_dapm_dai_get_connected_widgets(struct snd_soc_dai *dai, int stream, if (stream == SNDRV_PCM_STREAM_PLAYBACK) paths = is_connected_output_ep(dai->playback_widget, list); else - paths = is_connected_input_ep(dai->playback_widget, list); + paths = is_connected_input_ep(dai->capture_widget, list); trace_snd_soc_dapm_connected(paths, stream); dapm_clear_walk(&card->dapm); From a1c85ec03738421668becb973f35fe6e1501c6e6 Mon Sep 17 00:00:00 2001 From: Richard Zhao Date: Mon, 4 Jun 2012 09:42:54 +0800 Subject: [PATCH 02/30] ASoC: imx-audmux: add pinctrl support Signed-off-by: Richard Zhao Acked-by: Dong Aisheng Signed-off-by: Mark Brown --- sound/soc/fsl/imx-audmux.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/sound/soc/fsl/imx-audmux.c b/sound/soc/fsl/imx-audmux.c index f23700359c67..080327414c6b 100644 --- a/sound/soc/fsl/imx-audmux.c +++ b/sound/soc/fsl/imx-audmux.c @@ -26,6 +26,7 @@ #include #include #include +#include #include "imx-audmux.h" @@ -249,6 +250,7 @@ EXPORT_SYMBOL_GPL(imx_audmux_v2_configure_port); static int __devinit imx_audmux_probe(struct platform_device *pdev) { struct resource *res; + struct pinctrl *pinctrl; const struct of_device_id *of_id = of_match_device(imx_audmux_dt_ids, &pdev->dev); @@ -257,6 +259,12 @@ static int __devinit imx_audmux_probe(struct platform_device *pdev) if (!audmux_base) return -EADDRNOTAVAIL; + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); + if (IS_ERR(pinctrl)) { + dev_err(&pdev->dev, "setup pinctrl failed!"); + return PTR_ERR(pinctrl); + } + audmux_clk = clk_get(&pdev->dev, "audmux"); if (IS_ERR(audmux_clk)) { dev_dbg(&pdev->dev, "cannot get clock: %ld\n", From c8fdc1b56611faa7b38eab6b99da5e20113661ff Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 5 Jun 2012 12:25:19 +0100 Subject: [PATCH 03/30] ASoC: wm8994: Ensure all AIFnCLK events are run from the _late variants Ensure that all the actions get taken at appropriate times by calling the _PRE and _POST events for the aifNclk_ev functions explicitly. Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/codecs/wm8994.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index 993639d694ce..6d3a8654654a 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -1190,17 +1190,19 @@ static int late_enable_ev(struct snd_soc_dapm_widget *w, switch (event) { case SND_SOC_DAPM_PRE_PMU: if (wm8994->aif1clk_enable) { - aif1clk_ev(w, kcontrol, event); + aif1clk_ev(w, kcontrol, SND_SOC_DAPM_PRE_PMU); snd_soc_update_bits(codec, WM8994_AIF1_CLOCKING_1, WM8994_AIF1CLK_ENA_MASK, WM8994_AIF1CLK_ENA); + aif1clk_ev(w, kcontrol, SND_SOC_DAPM_POST_PMU); wm8994->aif1clk_enable = 0; } if (wm8994->aif2clk_enable) { - aif2clk_ev(w, kcontrol, event); + aif2clk_ev(w, kcontrol, SND_SOC_DAPM_PRE_PMU); snd_soc_update_bits(codec, WM8994_AIF2_CLOCKING_1, WM8994_AIF2CLK_ENA_MASK, WM8994_AIF2CLK_ENA); + aif2clk_ev(w, kcontrol, SND_SOC_DAPM_POST_PMU); wm8994->aif2clk_enable = 0; } break; @@ -1221,15 +1223,17 @@ static int late_disable_ev(struct snd_soc_dapm_widget *w, switch (event) { case SND_SOC_DAPM_POST_PMD: if (wm8994->aif1clk_disable) { + aif1clk_ev(w, kcontrol, SND_SOC_DAPM_PRE_PMD); snd_soc_update_bits(codec, WM8994_AIF1_CLOCKING_1, WM8994_AIF1CLK_ENA_MASK, 0); - aif1clk_ev(w, kcontrol, event); + aif1clk_ev(w, kcontrol, SND_SOC_DAPM_POST_PMD); wm8994->aif1clk_disable = 0; } if (wm8994->aif2clk_disable) { + aif2clk_ev(w, kcontrol, SND_SOC_DAPM_PRE_PMD); snd_soc_update_bits(codec, WM8994_AIF2_CLOCKING_1, WM8994_AIF2CLK_ENA_MASK, 0); - aif2clk_ev(w, kcontrol, event); + aif2clk_ev(w, kcontrol, SND_SOC_DAPM_POST_PMD); wm8994->aif2clk_disable = 0; } break; From bfd37bb5f681961e255fd2f346c20fdae2ef3f27 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 5 Jun 2012 12:31:32 +0100 Subject: [PATCH 04/30] ASoC: wm8994: Apply volume updates with clocks enabled Volume updates may not be acted upon if there is no clock applied when the volume update is written. Ensure this doesn't happen by writing out registers with volume updates after we enable each of the clocks. There are more registers updated than before as previously we were relying on wm_hubs to set those for controls it manages. Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/codecs/wm8994.c | 93 ++++++++++++++++++++++++--------------- 1 file changed, 58 insertions(+), 35 deletions(-) diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index 6d3a8654654a..aa8c98b628da 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -46,6 +46,39 @@ #define WM8994_NUM_DRC 3 #define WM8994_NUM_EQ 3 +static struct { + unsigned int reg; + unsigned int mask; +} wm8994_vu_bits[] = { + { WM8994_LEFT_LINE_INPUT_1_2_VOLUME, WM8994_IN1_VU }, + { WM8994_RIGHT_LINE_INPUT_1_2_VOLUME, WM8994_IN1_VU }, + { WM8994_LEFT_LINE_INPUT_3_4_VOLUME, WM8994_IN2_VU }, + { WM8994_RIGHT_LINE_INPUT_3_4_VOLUME, WM8994_IN2_VU }, + { WM8994_SPEAKER_VOLUME_LEFT, WM8994_SPKOUT_VU }, + { WM8994_SPEAKER_VOLUME_RIGHT, WM8994_SPKOUT_VU }, + { WM8994_LEFT_OUTPUT_VOLUME, WM8994_HPOUT1_VU }, + { WM8994_RIGHT_OUTPUT_VOLUME, WM8994_HPOUT1_VU }, + { WM8994_LEFT_OPGA_VOLUME, WM8994_MIXOUT_VU }, + { WM8994_RIGHT_OPGA_VOLUME, WM8994_MIXOUT_VU }, + + { WM8994_AIF1_DAC1_LEFT_VOLUME, WM8994_AIF1DAC1_VU }, + { WM8994_AIF1_DAC1_RIGHT_VOLUME, WM8994_AIF1DAC1_VU }, + { WM8994_AIF1_DAC2_LEFT_VOLUME, WM8994_AIF1DAC2_VU }, + { WM8994_AIF1_DAC2_RIGHT_VOLUME, WM8994_AIF1DAC2_VU }, + { WM8994_AIF2_DAC_LEFT_VOLUME, WM8994_AIF2DAC_VU }, + { WM8994_AIF2_DAC_RIGHT_VOLUME, WM8994_AIF2DAC_VU }, + { WM8994_AIF1_ADC1_LEFT_VOLUME, WM8994_AIF1ADC1_VU }, + { WM8994_AIF1_ADC1_RIGHT_VOLUME, WM8994_AIF1ADC1_VU }, + { WM8994_AIF1_ADC2_LEFT_VOLUME, WM8994_AIF1ADC2_VU }, + { WM8994_AIF1_ADC2_RIGHT_VOLUME, WM8994_AIF1ADC2_VU }, + { WM8994_AIF2_ADC_LEFT_VOLUME, WM8994_AIF2ADC_VU }, + { WM8994_AIF2_ADC_RIGHT_VOLUME, WM8994_AIF1ADC2_VU }, + { WM8994_DAC1_LEFT_VOLUME, WM8994_DAC1_VU }, + { WM8994_DAC1_RIGHT_VOLUME, WM8994_DAC1_VU }, + { WM8994_DAC2_LEFT_VOLUME, WM8994_DAC2_VU }, + { WM8994_DAC2_RIGHT_VOLUME, WM8994_DAC2_VU }, +}; + static int wm8994_drc_base[] = { WM8994_AIF1_DRC1_1, WM8994_AIF1_DRC2_1, @@ -989,6 +1022,7 @@ static int aif1clk_ev(struct snd_soc_dapm_widget *w, struct snd_soc_codec *codec = w->codec; struct wm8994 *control = codec->control_data; int mask = WM8994_AIF1DAC1L_ENA | WM8994_AIF1DAC1R_ENA; + int i; int dac; int adc; int val; @@ -1047,6 +1081,13 @@ static int aif1clk_ev(struct snd_soc_dapm_widget *w, WM8994_AIF1DAC2L_ENA); break; + case SND_SOC_DAPM_POST_PMU: + for (i = 0; i < ARRAY_SIZE(wm8994_vu_bits); i++) + snd_soc_write(codec, wm8994_vu_bits[i].reg, + snd_soc_read(codec, + wm8994_vu_bits[i].reg)); + break; + case SND_SOC_DAPM_PRE_PMD: case SND_SOC_DAPM_POST_PMD: snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_5, @@ -1072,6 +1113,7 @@ static int aif2clk_ev(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { struct snd_soc_codec *codec = w->codec; + int i; int dac; int adc; int val; @@ -1122,6 +1164,13 @@ static int aif2clk_ev(struct snd_soc_dapm_widget *w, WM8994_AIF2DACR_ENA); break; + case SND_SOC_DAPM_POST_PMU: + for (i = 0; i < ARRAY_SIZE(wm8994_vu_bits); i++) + snd_soc_write(codec, wm8994_vu_bits[i].reg, + snd_soc_read(codec, + wm8994_vu_bits[i].reg)); + break; + case SND_SOC_DAPM_PRE_PMD: case SND_SOC_DAPM_POST_PMD: snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_5, @@ -1531,9 +1580,11 @@ SND_SOC_DAPM_POST("Late Disable PGA", late_disable_ev) static const struct snd_soc_dapm_widget wm8994_lateclk_widgets[] = { SND_SOC_DAPM_SUPPLY("AIF1CLK", WM8994_AIF1_CLOCKING_1, 0, 0, aif1clk_ev, - SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD), + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU | + SND_SOC_DAPM_PRE_PMD), SND_SOC_DAPM_SUPPLY("AIF2CLK", WM8994_AIF2_CLOCKING_1, 0, 0, aif2clk_ev, - SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD), + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU | + SND_SOC_DAPM_PRE_PMD), SND_SOC_DAPM_PGA("Direct Voice", SND_SOC_NOPM, 0, 0, NULL, 0), SND_SOC_DAPM_MIXER("SPKL", WM8994_POWER_MANAGEMENT_3, 8, 0, left_speaker_mixer, ARRAY_SIZE(left_speaker_mixer)), @@ -3883,39 +3934,11 @@ static int wm8994_codec_probe(struct snd_soc_codec *codec) pm_runtime_put(codec->dev); - /* Latch volume updates (right only; we always do left then right). */ - snd_soc_update_bits(codec, WM8994_AIF1_DAC1_LEFT_VOLUME, - WM8994_AIF1DAC1_VU, WM8994_AIF1DAC1_VU); - snd_soc_update_bits(codec, WM8994_AIF1_DAC1_RIGHT_VOLUME, - WM8994_AIF1DAC1_VU, WM8994_AIF1DAC1_VU); - snd_soc_update_bits(codec, WM8994_AIF1_DAC2_LEFT_VOLUME, - WM8994_AIF1DAC2_VU, WM8994_AIF1DAC2_VU); - snd_soc_update_bits(codec, WM8994_AIF1_DAC2_RIGHT_VOLUME, - WM8994_AIF1DAC2_VU, WM8994_AIF1DAC2_VU); - snd_soc_update_bits(codec, WM8994_AIF2_DAC_LEFT_VOLUME, - WM8994_AIF2DAC_VU, WM8994_AIF2DAC_VU); - snd_soc_update_bits(codec, WM8994_AIF2_DAC_RIGHT_VOLUME, - WM8994_AIF2DAC_VU, WM8994_AIF2DAC_VU); - snd_soc_update_bits(codec, WM8994_AIF1_ADC1_LEFT_VOLUME, - WM8994_AIF1ADC1_VU, WM8994_AIF1ADC1_VU); - snd_soc_update_bits(codec, WM8994_AIF1_ADC1_RIGHT_VOLUME, - WM8994_AIF1ADC1_VU, WM8994_AIF1ADC1_VU); - snd_soc_update_bits(codec, WM8994_AIF1_ADC2_LEFT_VOLUME, - WM8994_AIF1ADC2_VU, WM8994_AIF1ADC2_VU); - snd_soc_update_bits(codec, WM8994_AIF1_ADC2_RIGHT_VOLUME, - WM8994_AIF1ADC2_VU, WM8994_AIF1ADC2_VU); - snd_soc_update_bits(codec, WM8994_AIF2_ADC_LEFT_VOLUME, - WM8994_AIF2ADC_VU, WM8994_AIF1ADC2_VU); - snd_soc_update_bits(codec, WM8994_AIF2_ADC_RIGHT_VOLUME, - WM8994_AIF2ADC_VU, WM8994_AIF1ADC2_VU); - snd_soc_update_bits(codec, WM8994_DAC1_LEFT_VOLUME, - WM8994_DAC1_VU, WM8994_DAC1_VU); - snd_soc_update_bits(codec, WM8994_DAC1_RIGHT_VOLUME, - WM8994_DAC1_VU, WM8994_DAC1_VU); - snd_soc_update_bits(codec, WM8994_DAC2_LEFT_VOLUME, - WM8994_DAC2_VU, WM8994_DAC2_VU); - snd_soc_update_bits(codec, WM8994_DAC2_RIGHT_VOLUME, - WM8994_DAC2_VU, WM8994_DAC2_VU); + /* Latch volume update bits */ + for (i = 0; i < ARRAY_SIZE(wm8994_vu_bits); i++) + snd_soc_update_bits(codec, wm8994_vu_bits[i].reg, + wm8994_vu_bits[i].mask, + wm8994_vu_bits[i].mask); /* Set the low bit of the 3D stereo depth so TLV matches */ snd_soc_update_bits(codec, WM8994_AIF1_DAC1_FILTERS_2, From 35ea0655a1bcdb1dcb1c1d0c4b6b391ade9c6d01 Mon Sep 17 00:00:00 2001 From: Liam Girdwood Date: Tue, 5 Jun 2012 19:26:59 +0100 Subject: [PATCH 05/30] ASoC: dpcm: Fix dpcm_get_be() to check that DAI is BE Make sure that the dpcm_get_be() only returns BE DAI links. Signed-off-by: Liam Girdwood Signed-off-by: Mark Brown --- sound/soc/soc-pcm.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c index bedd1717a373..48fd15b312c1 100644 --- a/sound/soc/soc-pcm.c +++ b/sound/soc/soc-pcm.c @@ -794,6 +794,9 @@ static struct snd_soc_pcm_runtime *dpcm_get_be(struct snd_soc_card *card, for (i = 0; i < card->num_links; i++) { be = &card->rtd[i]; + if (!be->dai_link->no_pcm) + continue; + if (be->cpu_dai->playback_widget == widget || be->codec_dai->playback_widget == widget) return be; @@ -803,6 +806,9 @@ static struct snd_soc_pcm_runtime *dpcm_get_be(struct snd_soc_card *card, for (i = 0; i < card->num_links; i++) { be = &card->rtd[i]; + if (!be->dai_link->no_pcm) + continue; + if (be->cpu_dai->capture_widget == widget || be->codec_dai->capture_widget == widget) return be; From 90c6ce0d5482ee52b0a427115e185d488783164b Mon Sep 17 00:00:00 2001 From: Liam Girdwood Date: Tue, 5 Jun 2012 19:27:15 +0100 Subject: [PATCH 06/30] ASoC: dapm: Fix input list to use source widgets We should only add source widgets to the input list. Signed-off-by: Liam Girdwood Signed-off-by: Mark Brown --- sound/soc/soc-dapm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index b47fe75444ac..89eae93445cf 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -913,7 +913,7 @@ static int is_connected_input_ep(struct snd_soc_dapm_widget *widget, /* do we need to add this widget to the list ? */ if (list) { int err; - err = dapm_list_add_widget(list, path->sink); + err = dapm_list_add_widget(list, path->source); if (err < 0) { dev_err(widget->dapm->dev, "could not add widget %s\n", widget->name); From 3ff1ec27e9f567824e73316025a9025528494506 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 8 Jun 2012 06:53:48 +0800 Subject: [PATCH 07/30] ASoC: wm2000: Always use a 4s timeout for the firmware Rather than having varying timeouts depending on the transition always use a 4s timeout. This provides better diagnostics for clocking errors and ensures compatibility with current calibration firmwares. Signed-off-by: Mark Brown --- sound/soc/codecs/wm2000.c | 59 ++++++++++++++------------------------- 1 file changed, 21 insertions(+), 38 deletions(-) diff --git a/sound/soc/codecs/wm2000.c b/sound/soc/codecs/wm2000.c index a75c3766aede..0418fa11e6bd 100644 --- a/sound/soc/codecs/wm2000.c +++ b/sound/soc/codecs/wm2000.c @@ -99,8 +99,9 @@ static void wm2000_reset(struct wm2000_priv *wm2000) } static int wm2000_poll_bit(struct i2c_client *i2c, - unsigned int reg, u8 mask, int timeout) + unsigned int reg, u8 mask) { + int timeout = 4000; int val; val = wm2000_read(i2c, reg); @@ -119,7 +120,7 @@ static int wm2000_poll_bit(struct i2c_client *i2c, static int wm2000_power_up(struct i2c_client *i2c, int analogue) { struct wm2000_priv *wm2000 = dev_get_drvdata(&i2c->dev); - int ret, timeout; + int ret; BUG_ON(wm2000->anc_mode != ANC_OFF); @@ -140,13 +141,13 @@ static int wm2000_power_up(struct i2c_client *i2c, int analogue) /* Wait for ANC engine to become ready */ if (!wm2000_poll_bit(i2c, WM2000_REG_ANC_STAT, - WM2000_ANC_ENG_IDLE, 1)) { + WM2000_ANC_ENG_IDLE)) { dev_err(&i2c->dev, "ANC engine failed to reset\n"); return -ETIMEDOUT; } if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS, - WM2000_STATUS_BOOT_COMPLETE, 1)) { + WM2000_STATUS_BOOT_COMPLETE)) { dev_err(&i2c->dev, "ANC engine failed to initialise\n"); return -ETIMEDOUT; } @@ -173,16 +174,13 @@ static int wm2000_power_up(struct i2c_client *i2c, int analogue) dev_dbg(&i2c->dev, "Download complete\n"); if (analogue) { - timeout = 248; - wm2000_write(i2c, WM2000_REG_ANA_VMID_PU_TIME, timeout / 4); + wm2000_write(i2c, WM2000_REG_ANA_VMID_PU_TIME, 248 / 4); wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL, WM2000_MODE_ANA_SEQ_INCLUDE | WM2000_MODE_MOUSE_ENABLE | WM2000_MODE_THERMAL_ENABLE); } else { - timeout = 10; - wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL, WM2000_MODE_MOUSE_ENABLE | WM2000_MODE_THERMAL_ENABLE); @@ -201,9 +199,8 @@ static int wm2000_power_up(struct i2c_client *i2c, int analogue) wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_ANC_INT_N_CLR); if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS, - WM2000_STATUS_MOUSE_ACTIVE, timeout)) { - dev_err(&i2c->dev, "Timed out waiting for device after %dms\n", - timeout * 10); + WM2000_STATUS_MOUSE_ACTIVE)) { + dev_err(&i2c->dev, "Timed out waiting for device\n"); return -ETIMEDOUT; } @@ -218,28 +215,25 @@ static int wm2000_power_up(struct i2c_client *i2c, int analogue) static int wm2000_power_down(struct i2c_client *i2c, int analogue) { struct wm2000_priv *wm2000 = dev_get_drvdata(&i2c->dev); - int timeout; if (analogue) { - timeout = 248; - wm2000_write(i2c, WM2000_REG_ANA_VMID_PD_TIME, timeout / 4); + wm2000_write(i2c, WM2000_REG_ANA_VMID_PD_TIME, 248 / 4); wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL, WM2000_MODE_ANA_SEQ_INCLUDE | WM2000_MODE_POWER_DOWN); } else { - timeout = 10; wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL, WM2000_MODE_POWER_DOWN); } if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS, - WM2000_STATUS_POWER_DOWN_COMPLETE, timeout)) { + WM2000_STATUS_POWER_DOWN_COMPLETE)) { dev_err(&i2c->dev, "Timeout waiting for ANC power down\n"); return -ETIMEDOUT; } if (!wm2000_poll_bit(i2c, WM2000_REG_ANC_STAT, - WM2000_ANC_ENG_IDLE, 1)) { + WM2000_ANC_ENG_IDLE)) { dev_err(&i2c->dev, "Timeout waiting for ANC engine idle\n"); return -ETIMEDOUT; } @@ -268,13 +262,13 @@ static int wm2000_enter_bypass(struct i2c_client *i2c, int analogue) } if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS, - WM2000_STATUS_ANC_DISABLED, 10)) { + WM2000_STATUS_ANC_DISABLED)) { dev_err(&i2c->dev, "Timeout waiting for ANC disable\n"); return -ETIMEDOUT; } if (!wm2000_poll_bit(i2c, WM2000_REG_ANC_STAT, - WM2000_ANC_ENG_IDLE, 1)) { + WM2000_ANC_ENG_IDLE)) { dev_err(&i2c->dev, "Timeout waiting for ANC engine idle\n"); return -ETIMEDOUT; } @@ -311,7 +305,7 @@ static int wm2000_exit_bypass(struct i2c_client *i2c, int analogue) wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_ANC_INT_N_CLR); if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS, - WM2000_STATUS_MOUSE_ACTIVE, 10)) { + WM2000_STATUS_MOUSE_ACTIVE)) { dev_err(&i2c->dev, "Timed out waiting for MOUSE\n"); return -ETIMEDOUT; } @@ -325,38 +319,32 @@ static int wm2000_exit_bypass(struct i2c_client *i2c, int analogue) static int wm2000_enter_standby(struct i2c_client *i2c, int analogue) { struct wm2000_priv *wm2000 = dev_get_drvdata(&i2c->dev); - int timeout; BUG_ON(wm2000->anc_mode != ANC_ACTIVE); if (analogue) { - timeout = 248; - wm2000_write(i2c, WM2000_REG_ANA_VMID_PD_TIME, timeout / 4); + wm2000_write(i2c, WM2000_REG_ANA_VMID_PD_TIME, 248 / 4); wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL, WM2000_MODE_ANA_SEQ_INCLUDE | WM2000_MODE_THERMAL_ENABLE | WM2000_MODE_STANDBY_ENTRY); } else { - timeout = 10; - wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL, WM2000_MODE_THERMAL_ENABLE | WM2000_MODE_STANDBY_ENTRY); } if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS, - WM2000_STATUS_ANC_DISABLED, timeout)) { + WM2000_STATUS_ANC_DISABLED)) { dev_err(&i2c->dev, "Timed out waiting for ANC disable after 1ms\n"); return -ETIMEDOUT; } - if (!wm2000_poll_bit(i2c, WM2000_REG_ANC_STAT, WM2000_ANC_ENG_IDLE, - 1)) { + if (!wm2000_poll_bit(i2c, WM2000_REG_ANC_STAT, WM2000_ANC_ENG_IDLE)) { dev_err(&i2c->dev, - "Timed out waiting for standby after %dms\n", - timeout * 10); + "Timed out waiting for standby\n"); return -ETIMEDOUT; } @@ -374,23 +362,19 @@ static int wm2000_enter_standby(struct i2c_client *i2c, int analogue) static int wm2000_exit_standby(struct i2c_client *i2c, int analogue) { struct wm2000_priv *wm2000 = dev_get_drvdata(&i2c->dev); - int timeout; BUG_ON(wm2000->anc_mode != ANC_STANDBY); wm2000_write(i2c, WM2000_REG_SYS_CTL1, 0); if (analogue) { - timeout = 248; - wm2000_write(i2c, WM2000_REG_ANA_VMID_PU_TIME, timeout / 4); + wm2000_write(i2c, WM2000_REG_ANA_VMID_PU_TIME, 248 / 4); wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL, WM2000_MODE_ANA_SEQ_INCLUDE | WM2000_MODE_THERMAL_ENABLE | WM2000_MODE_MOUSE_ENABLE); } else { - timeout = 10; - wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL, WM2000_MODE_THERMAL_ENABLE | WM2000_MODE_MOUSE_ENABLE); @@ -400,9 +384,8 @@ static int wm2000_exit_standby(struct i2c_client *i2c, int analogue) wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_ANC_INT_N_CLR); if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS, - WM2000_STATUS_MOUSE_ACTIVE, timeout)) { - dev_err(&i2c->dev, "Timed out waiting for MOUSE after %dms\n", - timeout * 10); + WM2000_STATUS_MOUSE_ACTIVE)) { + dev_err(&i2c->dev, "Timed out waiting for MOUSE\n"); return -ETIMEDOUT; } From 69c5b7530651c8e375d2fbecd157a9a9a20c4cc9 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Thu, 7 Jun 2012 17:58:31 -0600 Subject: [PATCH 08/30] ASoC: tegra: add MODULE_DEVICE_TABLE to tegra30_ahub This allows the module to automatically load when instantiated from device tree. Signed-off-by: Stephen Warren Signed-off-by: Mark Brown --- sound/soc/tegra/tegra30_ahub.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/tegra/tegra30_ahub.c b/sound/soc/tegra/tegra30_ahub.c index 57cd419f743e..f43edb364a18 100644 --- a/sound/soc/tegra/tegra30_ahub.c +++ b/sound/soc/tegra/tegra30_ahub.c @@ -629,3 +629,4 @@ MODULE_AUTHOR("Stephen Warren "); MODULE_DESCRIPTION("Tegra30 AHUB driver"); MODULE_LICENSE("GPL v2"); MODULE_ALIAS("platform:" DRV_NAME); +MODULE_DEVICE_TABLE(of, tegra30_ahub_of_match); From 8260ef075bd9848ce6a8004ec73b7454d410cc15 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 8 Jun 2012 09:01:37 +0200 Subject: [PATCH 09/30] ALSA: usb-audio: Fix substream assignments In 3.5 kernel, the endpoint is assigned dynamically for the substreams, but the PCM assignment still checks the presence of the endpoint pointer. This ended up in duplicated PCM substream creations at probing time, resulting in kernel warnings like: WARNING: at fs/proc/generic.c:586 proc_register+0x169/0x1a6() Pid: 1152, comm: modprobe Not tainted 3.5.0-rc1-00110-g71fae7e #2 Call Trace: [] warn_slowpath_common+0x83/0x9c [] warn_slowpath_fmt+0x46/0x48 [] ? add_preempt_count+0x39/0x3b [] proc_register+0x169/0x1a6 [] create_proc_entry+0x74/0x8c [] snd_info_register+0x3e/0xc3 [snd] [] snd_pcm_new_stream+0xb1/0x404 [snd_pcm] [] snd_usb_add_audio_stream+0xd2/0x230 [snd_usb_audio] [] ? snd_usb_parse_audio_format+0x252/0x34f [snd_usb_audio] [] ? kmem_cache_alloc_trace+0xab/0xbb [] snd_usb_parse_audio_interface+0x4ac/0x567 [snd_usb_audio] [] snd_usb_create_stream+0xe9/0x125 [snd_usb_audio] [] usb_audio_probe+0x62a/0x72c [snd_usb_audio] ..... This patch fixes the regression by checking the fixed endpoint number for each substream instead of the endpoint pointer. Reported-and-tested-by: Jamie Heilman Signed-off-by: Takashi Iwai --- sound/usb/card.h | 1 + sound/usb/stream.c | 7 +++---- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/sound/usb/card.h b/sound/usb/card.h index 0d37238b8457..2b9fffff23b6 100644 --- a/sound/usb/card.h +++ b/sound/usb/card.h @@ -119,6 +119,7 @@ struct snd_usb_substream { unsigned long unlink_mask; /* bitmask of unlinked urbs */ /* data and sync endpoints for this stream */ + unsigned int ep_num; /* the endpoint number */ struct snd_usb_endpoint *data_endpoint; struct snd_usb_endpoint *sync_endpoint; unsigned long flags; diff --git a/sound/usb/stream.c b/sound/usb/stream.c index 6b7d7a2b7baa..083ed81160e5 100644 --- a/sound/usb/stream.c +++ b/sound/usb/stream.c @@ -97,6 +97,7 @@ static void snd_usb_init_substream(struct snd_usb_stream *as, subs->formats |= fp->formats; subs->num_formats++; subs->fmt_type = fp->fmt_type; + subs->ep_num = fp->endpoint; } /* @@ -119,9 +120,7 @@ int snd_usb_add_audio_stream(struct snd_usb_audio *chip, if (as->fmt_type != fp->fmt_type) continue; subs = &as->substream[stream]; - if (!subs->data_endpoint) - continue; - if (subs->data_endpoint->ep_num == fp->endpoint) { + if (subs->ep_num == fp->endpoint) { list_add_tail(&fp->list, &subs->fmt_list); subs->num_formats++; subs->formats |= fp->formats; @@ -134,7 +133,7 @@ int snd_usb_add_audio_stream(struct snd_usb_audio *chip, if (as->fmt_type != fp->fmt_type) continue; subs = &as->substream[stream]; - if (subs->data_endpoint) + if (subs->ep_num) continue; err = snd_pcm_new_stream(as->pcm, stream, 1); if (err < 0) From c8e9cf7bb240049117d2fa64d1540476c289396d Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 7 Jun 2012 12:15:15 +0200 Subject: [PATCH 10/30] vga_switcheroo: Add a helper function to get the client state Add vga_switcheroo_get_client_state() to get the current state of the client. This is necessary to determine the proper initial state of audio clients in HD-audio driver. Acked-by: Dave Airlie Signed-off-by: Takashi Iwai --- drivers/gpu/vga/vga_switcheroo.c | 13 +++++++++++++ include/linux/vga_switcheroo.h | 7 +++++++ 2 files changed, 20 insertions(+) diff --git a/drivers/gpu/vga/vga_switcheroo.c b/drivers/gpu/vga/vga_switcheroo.c index 38f9534ac513..eb4f64f0a565 100644 --- a/drivers/gpu/vga/vga_switcheroo.c +++ b/drivers/gpu/vga/vga_switcheroo.c @@ -190,6 +190,19 @@ find_active_client(struct list_head *head) return NULL; } +int vga_switcheroo_get_client_state(struct pci_dev *pdev) +{ + struct vga_switcheroo_client *client; + + client = find_client_from_pci(&vgasr_priv.clients, pdev); + if (!client) + return VGA_SWITCHEROO_NOT_FOUND; + if (!vgasr_priv.active) + return VGA_SWITCHEROO_INIT; + return client->pwr_state; +} +EXPORT_SYMBOL(vga_switcheroo_get_client_state); + void vga_switcheroo_unregister_client(struct pci_dev *pdev) { struct vga_switcheroo_client *client; diff --git a/include/linux/vga_switcheroo.h b/include/linux/vga_switcheroo.h index b455c7c212eb..b176342ca031 100644 --- a/include/linux/vga_switcheroo.h +++ b/include/linux/vga_switcheroo.h @@ -12,6 +12,9 @@ enum vga_switcheroo_state { VGA_SWITCHEROO_OFF, VGA_SWITCHEROO_ON, + /* below are referred only from vga_switcheroo_get_client_state() */ + VGA_SWITCHEROO_INIT, + VGA_SWITCHEROO_NOT_FOUND, }; enum vga_switcheroo_client_id { @@ -50,6 +53,8 @@ void vga_switcheroo_unregister_handler(void); int vga_switcheroo_process_delayed_switch(void); +int vga_switcheroo_get_client_state(struct pci_dev *dev); + #else static inline void vga_switcheroo_unregister_client(struct pci_dev *dev) {} @@ -62,5 +67,7 @@ static inline int vga_switcheroo_register_audio_client(struct pci_dev *pdev, int id, bool active) { return 0; } static inline void vga_switcheroo_unregister_handler(void) {} static inline int vga_switcheroo_process_delayed_switch(void) { return 0; } +static inline int vga_switcheroo_get_client_state(struct pci_dev *dev) { return VGA_SWITCHEROO_CLIENT_ON; } + #endif From 12b78a7f671aa91fd41899615bf6d171c925c3d7 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 7 Jun 2012 12:15:16 +0200 Subject: [PATCH 11/30] ALSA: hda - Fix uninitialized HDMI controllers with VGA-switcheroo When VGA-switcheroo is built in but unused on systems with multiple graphics cards, the initializations of non-default graphics cards are skipped and never enabled (because the switcheroo is activated only when the controller supports). The current behavior is for avoiding the system lockup by accessing the disabled GPU, but due to the recent change in VGA-switcheroo, it determines the state simply by checking with the default VGA device. This is the culprit. Now with the new vga_switcheroo_get_client_state(), we can know the initial state of the bound GPU, thus can determine the initial audio client state more correctly. Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_intel.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 2b6392be451c..5f0375fefc89 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -2670,7 +2670,7 @@ static bool __devinit check_hdmi_disabled(struct pci_dev *pci) struct pci_dev *p = get_bound_vga(pci); if (p) { - if (vga_default_device() && p != vga_default_device()) + if (vga_switcheroo_get_client_state(p) == VGA_SWITCHEROO_OFF) vga_inactive = true; pci_dev_put(p); } From 505cff00de9c303b95c204eb4544066e3e707911 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 8 Jun 2012 12:49:17 +0200 Subject: [PATCH 12/30] vga_switcheroo: Fix error without CONFIG_VGA_SWITCHEROO Fix a typo that is built only when CONFIG_VGA_SWITCHEROO=n. Signed-off-by: Takashi Iwai --- include/linux/vga_switcheroo.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/vga_switcheroo.h b/include/linux/vga_switcheroo.h index b176342ca031..60da41fe9dc2 100644 --- a/include/linux/vga_switcheroo.h +++ b/include/linux/vga_switcheroo.h @@ -67,7 +67,7 @@ static inline int vga_switcheroo_register_audio_client(struct pci_dev *pdev, int id, bool active) { return 0; } static inline void vga_switcheroo_unregister_handler(void) {} static inline int vga_switcheroo_process_delayed_switch(void) { return 0; } -static inline int vga_switcheroo_get_client_state(struct pci_dev *dev) { return VGA_SWITCHEROO_CLIENT_ON; } +static inline int vga_switcheroo_get_client_state(struct pci_dev *dev) { return VGA_SWITCHEROO_ON; } #endif From 8393ec4a13889339bacfb8b038fb13716eef7a2b Mon Sep 17 00:00:00 2001 From: Steven Newbury Date: Fri, 8 Jun 2012 13:06:29 +0200 Subject: [PATCH 13/30] ALSA: hda - HDMI Audio init all connectors when VGA-switcheroo is off When VGA_SWITCHEROO support is enabled hda_intel initialises the HDMI audio device on the current VGA device. When it's not enabled it only initialises the HDMI device on the default VGA adaptor, this means secondary cards get no audio support which is very unhelpful for multi-seat! With this patch, when SUPPORT_VGA_SWITCHEROO is disabled hda_intel initialises all HDMI audio devices, not just the default VGA. [minor optimizations by tiwai] Signed-off-by: Steven Newbury Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_intel.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 5f0375fefc89..e172c5d6855a 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -2484,9 +2484,9 @@ static void azx_notifier_unregister(struct azx *chip) static int DELAYED_INIT_MARK azx_first_init(struct azx *chip); static int DELAYED_INIT_MARK azx_probe_continue(struct azx *chip); +#ifdef SUPPORT_VGA_SWITCHEROO static struct pci_dev __devinit *get_bound_vga(struct pci_dev *pci); -#ifdef SUPPORT_VGA_SWITCHEROO static void azx_vs_set_state(struct pci_dev *pci, enum vga_switcheroo_state state) { @@ -2578,6 +2578,7 @@ static int __devinit register_vga_switcheroo(struct azx *chip) #else #define init_vga_switcheroo(chip) /* NOP */ #define register_vga_switcheroo(chip) 0 +#define check_hdmi_disabled(pci) false #endif /* SUPPORT_VGA_SWITCHER */ /* @@ -2638,6 +2639,7 @@ static int azx_dev_free(struct snd_device *device) return azx_free(device->device_data); } +#ifdef SUPPORT_VGA_SWITCHEROO /* * Check of disabled HDMI controller by vga-switcheroo */ @@ -2676,6 +2678,7 @@ static bool __devinit check_hdmi_disabled(struct pci_dev *pci) } return vga_inactive; } +#endif /* SUPPORT_VGA_SWITCHEROO */ /* * white/black-listing for position_fix From c91c3faea500da34d42a14735f1f67bb137b6413 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Sat, 9 Jun 2012 08:46:42 +0200 Subject: [PATCH 14/30] vga_switcheroo: Enable/disable audio clients at the right time MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The audio clients have to be disabled before disabling the VGA and switching. Similarly, enabling the audio client should be done at last. Otherwise the audio-side operation stalls, eventually leading to Oops or lockups. Tested-by: Jörg-Volker Peetz Acked-by: Dave Airlie Signed-off-by: Takashi Iwai --- drivers/gpu/vga/vga_switcheroo.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/vga/vga_switcheroo.c b/drivers/gpu/vga/vga_switcheroo.c index eb4f64f0a565..5b3c7d135dc9 100644 --- a/drivers/gpu/vga/vga_switcheroo.c +++ b/drivers/gpu/vga/vga_switcheroo.c @@ -304,8 +304,6 @@ static int vga_switchto_stage1(struct vga_switcheroo_client *new_client) vga_switchon(new_client); vga_set_default_device(new_client->pdev); - set_audio_state(new_client->id, VGA_SWITCHEROO_ON); - return 0; } @@ -321,6 +319,8 @@ static int vga_switchto_stage2(struct vga_switcheroo_client *new_client) active->active = false; + set_audio_state(active->id, VGA_SWITCHEROO_OFF); + if (new_client->fb_info) { struct fb_event event; event.info = new_client->fb_info; @@ -334,11 +334,11 @@ static int vga_switchto_stage2(struct vga_switcheroo_client *new_client) if (new_client->ops->reprobe) new_client->ops->reprobe(new_client->pdev); - set_audio_state(active->id, VGA_SWITCHEROO_OFF); - if (active->pwr_state == VGA_SWITCHEROO_ON) vga_switchoff(active); + set_audio_state(new_client->id, VGA_SWITCHEROO_ON); + new_client->active = true; return 0; } @@ -384,8 +384,9 @@ vga_switcheroo_debugfs_write(struct file *filp, const char __user *ubuf, /* pwr off the device not in use */ if (strncmp(usercmd, "OFF", 3) == 0) { list_for_each_entry(client, &vgasr_priv.clients, list) { - if (client->active) + if (client->active || client_is_audio(client)) continue; + set_audio_state(client->id, VGA_SWITCHEROO_OFF); if (client->pwr_state == VGA_SWITCHEROO_ON) vga_switchoff(client); } @@ -394,10 +395,11 @@ vga_switcheroo_debugfs_write(struct file *filp, const char __user *ubuf, /* pwr on the device not in use */ if (strncmp(usercmd, "ON", 2) == 0) { list_for_each_entry(client, &vgasr_priv.clients, list) { - if (client->active) + if (client->active || client_is_audio(client)) continue; if (client->pwr_state == VGA_SWITCHEROO_OFF) vga_switchon(client); + set_audio_state(client->id, VGA_SWITCHEROO_ON); } goto out; } From 601722157b3f6be73623644eeae6f14940f0bd8f Mon Sep 17 00:00:00 2001 From: Qiao Zhou Date: Mon, 4 Jun 2012 10:41:03 +0800 Subject: [PATCH 15/30] ARM: MMP: add pxa910-ssp into ssp_id_table add pxa910-ssp into ssp_id_table, and fix pxa-ssp compiling issue under mach-mmp architect. Signed-off-by: Qiao Zhou Acked-by: Haojian Zhuang Signed-off-by: Mark Brown --- arch/arm/plat-pxa/ssp.c | 1 + include/linux/pxa2xx_ssp.h | 1 + include/linux/spi/pxa2xx_spi.h | 2 +- 3 files changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm/plat-pxa/ssp.c b/arch/arm/plat-pxa/ssp.c index 58b79809d20c..584c9bf8ed2d 100644 --- a/arch/arm/plat-pxa/ssp.c +++ b/arch/arm/plat-pxa/ssp.c @@ -193,6 +193,7 @@ static const struct platform_device_id ssp_id_table[] = { { "pxa25x-nssp", PXA25x_NSSP }, { "pxa27x-ssp", PXA27x_SSP }, { "pxa168-ssp", PXA168_SSP }, + { "pxa910-ssp", PXA910_SSP }, { }, }; diff --git a/include/linux/pxa2xx_ssp.h b/include/linux/pxa2xx_ssp.h index 44835fb39793..f9fe15ec2b51 100644 --- a/include/linux/pxa2xx_ssp.h +++ b/include/linux/pxa2xx_ssp.h @@ -161,6 +161,7 @@ enum pxa_ssp_type { PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */ PXA27x_SSP, PXA168_SSP, + PXA910_SSP, CE4100_SSP, }; diff --git a/include/linux/spi/pxa2xx_spi.h b/include/linux/spi/pxa2xx_spi.h index d3e1075f7b60..c73d1445c77e 100644 --- a/include/linux/spi/pxa2xx_spi.h +++ b/include/linux/spi/pxa2xx_spi.h @@ -43,7 +43,7 @@ struct pxa2xx_spi_chip { void (*cs_control)(u32 command); }; -#ifdef CONFIG_ARCH_PXA +#if defined(CONFIG_ARCH_PXA) || defined(CONFIG_ARCH_MMP) #include #include From 972a55b62d592cfcd6d73577df8a52f1251ea9a7 Mon Sep 17 00:00:00 2001 From: Qiao Zhou Date: Mon, 4 Jun 2012 10:41:04 +0800 Subject: [PATCH 16/30] ASoC: fix pxa-ssp compiling issue under mach-mmp pxa-ssp.c uses API like cpu_is_pxa3xx(), cpu_is_pxa2xx(), which is defined under arch-pxa architecture, and drivers under mach-mmp can't find it. so just use ssp->type to replace that API. Signed-off-by: Qiao Zhou Acked-by: Haojian Zhuang Signed-off-by: Mark Brown --- include/linux/pxa2xx_ssp.h | 1 + sound/soc/pxa/pxa-ssp.c | 38 +++++++++++--------------------------- 2 files changed, 12 insertions(+), 27 deletions(-) diff --git a/include/linux/pxa2xx_ssp.h b/include/linux/pxa2xx_ssp.h index f9fe15ec2b51..f36632061c66 100644 --- a/include/linux/pxa2xx_ssp.h +++ b/include/linux/pxa2xx_ssp.h @@ -160,6 +160,7 @@ enum pxa_ssp_type { PXA25x_SSP, /* pxa 210, 250, 255, 26x */ PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */ PXA27x_SSP, + PXA3xx_SSP, PXA168_SSP, PXA910_SSP, CE4100_SSP, diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c index 1c2aa7fab3fd..4da5fc55c7ee 100644 --- a/sound/soc/pxa/pxa-ssp.c +++ b/sound/soc/pxa/pxa-ssp.c @@ -33,7 +33,6 @@ #include #include -#include #include "../../arm/pxa2xx-pcm.h" #include "pxa-ssp.h" @@ -194,7 +193,7 @@ static void pxa_ssp_set_scr(struct ssp_device *ssp, u32 div) { u32 sscr0 = pxa_ssp_read_reg(ssp, SSCR0); - if (cpu_is_pxa25x() && ssp->type == PXA25x_SSP) { + if (ssp->type == PXA25x_SSP) { sscr0 &= ~0x0000ff00; sscr0 |= ((div - 2)/2) << 8; /* 2..512 */ } else { @@ -212,7 +211,7 @@ static u32 pxa_ssp_get_scr(struct ssp_device *ssp) u32 sscr0 = pxa_ssp_read_reg(ssp, SSCR0); u32 div; - if (cpu_is_pxa25x() && ssp->type == PXA25x_SSP) + if (ssp->type == PXA25x_SSP) div = ((sscr0 >> 8) & 0xff) * 2 + 2; else div = ((sscr0 >> 8) & 0xfff) + 1; @@ -242,7 +241,7 @@ static int pxa_ssp_set_dai_sysclk(struct snd_soc_dai *cpu_dai, break; case PXA_SSP_CLK_PLL: /* Internal PLL is fixed */ - if (cpu_is_pxa25x()) + if (ssp->type == PXA25x_SSP) priv->sysclk = 1843200; else priv->sysclk = 13000000; @@ -266,11 +265,11 @@ static int pxa_ssp_set_dai_sysclk(struct snd_soc_dai *cpu_dai, /* The SSP clock must be disabled when changing SSP clock mode * on PXA2xx. On PXA3xx it must be enabled when doing so. */ - if (!cpu_is_pxa3xx()) + if (ssp->type != PXA3xx_SSP) clk_disable(ssp->clk); val = pxa_ssp_read_reg(ssp, SSCR0) | sscr0; pxa_ssp_write_reg(ssp, SSCR0, val); - if (!cpu_is_pxa3xx()) + if (ssp->type != PXA3xx_SSP) clk_enable(ssp->clk); return 0; @@ -294,24 +293,20 @@ static int pxa_ssp_set_dai_clkdiv(struct snd_soc_dai *cpu_dai, case PXA_SSP_AUDIO_DIV_SCDB: val = pxa_ssp_read_reg(ssp, SSACD); val &= ~SSACD_SCDB; -#if defined(CONFIG_PXA3xx) - if (cpu_is_pxa3xx()) + if (ssp->type == PXA3xx_SSP) val &= ~SSACD_SCDX8; -#endif switch (div) { case PXA_SSP_CLK_SCDB_1: val |= SSACD_SCDB; break; case PXA_SSP_CLK_SCDB_4: break; -#if defined(CONFIG_PXA3xx) case PXA_SSP_CLK_SCDB_8: - if (cpu_is_pxa3xx()) + if (ssp->type == PXA3xx_SSP) val |= SSACD_SCDX8; else return -EINVAL; break; -#endif default: return -EINVAL; } @@ -337,10 +332,8 @@ static int pxa_ssp_set_dai_pll(struct snd_soc_dai *cpu_dai, int pll_id, struct ssp_device *ssp = priv->ssp; u32 ssacd = pxa_ssp_read_reg(ssp, SSACD) & ~0x70; -#if defined(CONFIG_PXA3xx) - if (cpu_is_pxa3xx()) + if (ssp->type == PXA3xx_SSP) pxa_ssp_write_reg(ssp, SSACDD, 0); -#endif switch (freq_out) { case 5622000: @@ -365,11 +358,10 @@ static int pxa_ssp_set_dai_pll(struct snd_soc_dai *cpu_dai, int pll_id, break; default: -#ifdef CONFIG_PXA3xx /* PXA3xx has a clock ditherer which can be used to generate * a wider range of frequencies - calculate a value for it. */ - if (cpu_is_pxa3xx()) { + if (ssp->type == PXA3xx_SSP) { u32 val; u64 tmp = 19968; tmp *= 1000000; @@ -386,7 +378,6 @@ static int pxa_ssp_set_dai_pll(struct snd_soc_dai *cpu_dai, int pll_id, val, freq_out); break; } -#endif return -EINVAL; } @@ -590,10 +581,8 @@ static int pxa_ssp_hw_params(struct snd_pcm_substream *substream, /* bit size */ switch (params_format(params)) { case SNDRV_PCM_FORMAT_S16_LE: -#ifdef CONFIG_PXA3xx - if (cpu_is_pxa3xx()) + if (ssp->type == PXA3xx_SSP) sscr0 |= SSCR0_FPCKE; -#endif sscr0 |= SSCR0_DataSize(16); break; case SNDRV_PCM_FORMAT_S24_LE: @@ -618,9 +607,7 @@ static int pxa_ssp_hw_params(struct snd_pcm_substream *substream, * trying and failing a lot; some of the registers * needed for that mode are only available on PXA3xx. */ - -#ifdef CONFIG_PXA3xx - if (!cpu_is_pxa3xx()) + if (ssp->type != PXA3xx_SSP) return -EINVAL; sspsp |= SSPSP_SFRMWDTH(width * 2); @@ -628,9 +615,6 @@ static int pxa_ssp_hw_params(struct snd_pcm_substream *substream, sspsp |= SSPSP_EDMYSTOP(3); sspsp |= SSPSP_DMYSTOP(3); sspsp |= SSPSP_DMYSTRT(1); -#else - return -EINVAL; -#endif } else { /* The frame width is the width the LRCLK is * asserted for; the delay is expressed in From 433897f7408b556f7dfbb98c94deea02e634d2a7 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sat, 9 Jun 2012 11:38:12 +0800 Subject: [PATCH 17/30] ASoC: wm8904: Fix GPIO and MICBIAS initialisation for regmap conversion We no longer have a flat ASoC cache so can't peer directly into the array any more but should instead use the register I/O functions to update the cache. Signed-off-by: Mark Brown Cc: stable@vger.kernel.org (v3.4) --- sound/soc/codecs/wm8904.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/sound/soc/codecs/wm8904.c b/sound/soc/codecs/wm8904.c index 65d525d74c54..4e190b5950ba 100644 --- a/sound/soc/codecs/wm8904.c +++ b/sound/soc/codecs/wm8904.c @@ -2084,7 +2084,6 @@ static int wm8904_probe(struct snd_soc_codec *codec) { struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec); struct wm8904_pdata *pdata = wm8904->pdata; - u16 *reg_cache = codec->reg_cache; int ret, i; codec->cache_sync = 1; @@ -2180,14 +2179,18 @@ static int wm8904_probe(struct snd_soc_codec *codec) if (!pdata->gpio_cfg[i]) continue; - reg_cache[WM8904_GPIO_CONTROL_1 + i] - = pdata->gpio_cfg[i] & 0xffff; + regmap_update_bits(wm8904->regmap, + WM8904_GPIO_CONTROL_1 + i, + 0xffff, + pdata->gpio_cfg[i]); } /* Zero is the default value for these anyway */ for (i = 0; i < WM8904_MIC_REGS; i++) - reg_cache[WM8904_MIC_BIAS_CONTROL_0 + i] - = pdata->mic_cfg[i]; + regmap_update_bits(wm8904->regmap, + WM8904_MIC_BIAS_CONTROL_0 + i, + 0xffff, + pdata->mic_cfg[i]); } /* Set Class W by default - this will be managed by the Class From c1b88ee2bbb82c56ac24c70850004de9a43915d5 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sat, 9 Jun 2012 11:27:17 +0800 Subject: [PATCH 18/30] ASoC: wm8904: Fix cache only management We should be using the regmap API consistently for all the cache only configuration and we should be going cache only before we power down the supplies. Signed-off-by: Mark Brown --- sound/soc/codecs/wm8904.c | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-) diff --git a/sound/soc/codecs/wm8904.c b/sound/soc/codecs/wm8904.c index 4e190b5950ba..812acd83fb48 100644 --- a/sound/soc/codecs/wm8904.c +++ b/sound/soc/codecs/wm8904.c @@ -1863,6 +1863,7 @@ static int wm8904_set_bias_level(struct snd_soc_codec *codec, return ret; } + regcache_cache_only(wm8904->regmap, false); regcache_sync(wm8904->regmap); /* Enable bias */ @@ -1899,14 +1900,8 @@ static int wm8904_set_bias_level(struct snd_soc_codec *codec, snd_soc_update_bits(codec, WM8904_BIAS_CONTROL_0, WM8904_BIAS_ENA, 0); -#ifdef CONFIG_REGULATOR - /* Post 2.6.34 we will be able to get a callback when - * the regulators are disabled which we can use but - * for now just assume that the power will be cut if - * the regulator API is in use. - */ - codec->cache_sync = 1; -#endif + regcache_cache_only(wm8904->regmap, true); + regcache_mark_dirty(wm8904->regmap); regulator_bulk_disable(ARRAY_SIZE(wm8904->supplies), wm8904->supplies); @@ -2086,7 +2081,6 @@ static int wm8904_probe(struct snd_soc_codec *codec) struct wm8904_pdata *pdata = wm8904->pdata; int ret, i; - codec->cache_sync = 1; codec->control_data = wm8904->regmap; switch (wm8904->devtype) { @@ -2149,6 +2143,7 @@ static int wm8904_probe(struct snd_soc_codec *codec) goto err_enable; } + regcache_cache_only(wm8904->regmap, true); /* Change some default settings - latch VU and enable ZC */ snd_soc_update_bits(codec, WM8904_ADC_DIGITAL_VOLUME_LEFT, WM8904_ADC_VU, WM8904_ADC_VU); From 90ba6859ce914feff3632eeb7227b9f99c030ca9 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 11 Jun 2012 18:15:50 +0800 Subject: [PATCH 19/30] ASoC: wm8996: Remove spurious regulator_bulk_free() We're using demv_regulator_bulk_get() so don't need to manually free and this is in the CODEC driver not the I2C driver anyway. Signed-off-by: Mark Brown --- sound/soc/codecs/wm8996.c | 1 - 1 file changed, 1 deletion(-) diff --git a/sound/soc/codecs/wm8996.c b/sound/soc/codecs/wm8996.c index 8af422e38fd0..379bd1e49432 100644 --- a/sound/soc/codecs/wm8996.c +++ b/sound/soc/codecs/wm8996.c @@ -3051,7 +3051,6 @@ static int wm8996_remove(struct snd_soc_codec *codec) for (i = 0; i < ARRAY_SIZE(wm8996->supplies); i++) regulator_unregister_notifier(wm8996->supplies[i].consumer, &wm8996->disable_nb[i]); - regulator_bulk_free(ARRAY_SIZE(wm8996->supplies), wm8996->supplies); return 0; } From db1334098392e1278a113e629a7ae58a7453f83f Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 11 Jun 2012 18:23:13 +0800 Subject: [PATCH 20/30] ASoC: wm8996: Move reset before the initial regulator disable If we don't have control over the LDO but do have control over the other regulators then we may end up trying to write to a powered off device. Signed-off-by: Mark Brown --- sound/soc/codecs/wm8996.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/wm8996.c b/sound/soc/codecs/wm8996.c index 379bd1e49432..64d9cf7149de 100644 --- a/sound/soc/codecs/wm8996.c +++ b/sound/soc/codecs/wm8996.c @@ -3205,14 +3205,14 @@ static __devinit int wm8996_i2c_probe(struct i2c_client *i2c, dev_info(&i2c->dev, "revision %c\n", (reg & WM8996_CHIP_REV_MASK) + 'A'); - regulator_bulk_disable(ARRAY_SIZE(wm8996->supplies), wm8996->supplies); - ret = wm8996_reset(wm8996); if (ret < 0) { dev_err(&i2c->dev, "Failed to issue reset\n"); goto err_regmap; } + regulator_bulk_disable(ARRAY_SIZE(wm8996->supplies), wm8996->supplies); + wm8996_init_gpio(wm8996); ret = snd_soc_register_codec(&i2c->dev, From 9c699e0a9566cfb6245284ce4857d7a06b02f3b1 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 11 Jun 2012 18:20:02 +0800 Subject: [PATCH 21/30] ASoC: wm8996: Mark the CODEC as cache only when powering off on boot Otherwise we might try to write to a powered off device. Signed-off-by: Mark Brown --- sound/soc/codecs/wm8996.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/sound/soc/codecs/wm8996.c b/sound/soc/codecs/wm8996.c index 64d9cf7149de..dc9b42b7fc4d 100644 --- a/sound/soc/codecs/wm8996.c +++ b/sound/soc/codecs/wm8996.c @@ -2837,8 +2837,6 @@ static int wm8996_probe(struct snd_soc_codec *codec) } } - regcache_cache_only(codec->control_data, true); - /* Apply platform data settings */ snd_soc_update_bits(codec, WM8996_LINE_INPUT_CONTROL, WM8996_INL_MODE_MASK | WM8996_INR_MODE_MASK, @@ -3211,6 +3209,7 @@ static __devinit int wm8996_i2c_probe(struct i2c_client *i2c, goto err_regmap; } + regcache_cache_only(wm8996->regmap, true); regulator_bulk_disable(ARRAY_SIZE(wm8996->supplies), wm8996->supplies); wm8996_init_gpio(wm8996); From f2a8ecaf6d7259cc70fb5898823eab9a2dd86570 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 11 Jun 2012 15:51:54 +0200 Subject: [PATCH 22/30] ALSA: hda - Fix detection of Creative SoundCore3D controllers The PCI ID entries of Creative SoundCore3D HD-audio controllers should be before the wildcard for vendor = Creative. Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_intel.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index e172c5d6855a..02763827dde0 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -3354,6 +3354,11 @@ static DEFINE_PCI_DEVICE_TABLE(azx_ids) = { { PCI_DEVICE(0x6549, 0x1200), .driver_data = AZX_DRIVER_TERA | AZX_DCAPS_NO_64BIT }, /* Creative X-Fi (CA0110-IBG) */ + /* CTHDA chips */ + { PCI_DEVICE(0x1102, 0x0010), + .driver_data = AZX_DRIVER_CTHDA | AZX_DCAPS_PRESET_CTHDA }, + { PCI_DEVICE(0x1102, 0x0012), + .driver_data = AZX_DRIVER_CTHDA | AZX_DCAPS_PRESET_CTHDA }, #if !defined(CONFIG_SND_CTXFI) && !defined(CONFIG_SND_CTXFI_MODULE) /* the following entry conflicts with snd-ctxfi driver, * as ctxfi driver mutates from HD-audio to native mode with @@ -3370,11 +3375,6 @@ static DEFINE_PCI_DEVICE_TABLE(azx_ids) = { .driver_data = AZX_DRIVER_CTX | AZX_DCAPS_CTX_WORKAROUND | AZX_DCAPS_RIRB_PRE_DELAY | AZX_DCAPS_POSFIX_LPIB }, #endif - /* CTHDA chips */ - { PCI_DEVICE(0x1102, 0x0010), - .driver_data = AZX_DRIVER_CTHDA | AZX_DCAPS_PRESET_CTHDA }, - { PCI_DEVICE(0x1102, 0x0012), - .driver_data = AZX_DRIVER_CTHDA | AZX_DCAPS_PRESET_CTHDA }, /* Vortex86MX */ { PCI_DEVICE(0x17f3, 0x3010), .driver_data = AZX_DRIVER_GENERIC }, /* VMware HDAudio */ From 3419ae781f1592b3d367107db6500090495490cd Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Mon, 11 Jun 2012 11:27:19 -0600 Subject: [PATCH 23/30] ASoC: tegra+wm8903: turn of mic detect when card is removed If mic detect is left enabled and the WM8903 detects a status change, the WM8903 driver will make a callback against the free()d jack, which will cause a crash. This problem can be triggered by fully initializing an audio card, then removing and re-inserting the machine driver module. Signed-off-by: Stephen Warren Signed-off-by: Mark Brown --- sound/soc/tegra/tegra_wm8903.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/sound/soc/tegra/tegra_wm8903.c b/sound/soc/tegra/tegra_wm8903.c index 0b0df49d9d33..3b6da91188a9 100644 --- a/sound/soc/tegra/tegra_wm8903.c +++ b/sound/soc/tegra/tegra_wm8903.c @@ -346,6 +346,17 @@ static int tegra_wm8903_init(struct snd_soc_pcm_runtime *rtd) return 0; } +static int tegra_wm8903_remove(struct snd_soc_card *card) +{ + struct snd_soc_pcm_runtime *rtd = &(card->rtd[0]); + struct snd_soc_dai *codec_dai = rtd->codec_dai; + struct snd_soc_codec *codec = codec_dai->codec; + + wm8903_mic_detect(codec, NULL, 0, 0); + + return 0; +} + static struct snd_soc_dai_link tegra_wm8903_dai = { .name = "WM8903", .stream_name = "WM8903 PCM", @@ -363,6 +374,8 @@ static struct snd_soc_card snd_soc_tegra_wm8903 = { .dai_link = &tegra_wm8903_dai, .num_links = 1, + .remove = tegra_wm8903_remove, + .controls = tegra_wm8903_controls, .num_controls = ARRAY_SIZE(tegra_wm8903_controls), .dapm_widgets = tegra_wm8903_dapm_widgets, From 6b18f79399f25a0f8e2b915b2dcb8bf5c7aa470d Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Tue, 12 Jun 2012 16:16:17 +0530 Subject: [PATCH 24/30] ALSA: compress_core: don't wake up on pause during pause the core should maintain the status-quo on the device and pointers and not wake up. If app needs it should call DROP explcitly. Signed-off-by: Namarta Kohli Signed-off-by: Vinod Koul Signed-off-by: Takashi Iwai --- sound/core/compress_offload.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/sound/core/compress_offload.c b/sound/core/compress_offload.c index a68aed7fce02..375f7a0d66ef 100644 --- a/sound/core/compress_offload.c +++ b/sound/core/compress_offload.c @@ -502,10 +502,8 @@ static int snd_compr_pause(struct snd_compr_stream *stream) if (stream->runtime->state != SNDRV_PCM_STATE_RUNNING) return -EPERM; retval = stream->ops->trigger(stream, SNDRV_PCM_TRIGGER_PAUSE_PUSH); - if (!retval) { + if (!retval) stream->runtime->state = SNDRV_PCM_STATE_PAUSED; - wake_up(&stream->runtime->sleep); - } return retval; } From 8b21460ac6c0c88a0fec1cc70906c8e25c5aaa54 Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Tue, 12 Jun 2012 16:16:18 +0530 Subject: [PATCH 25/30] ALSA: compress_core: cleanup pointers on stop as the start can be called after stop again, we need to reset state Signed-off-by: Namarta Kohli Signed-off-by: Vinod Koul Signed-off-by: Takashi Iwai --- sound/core/compress_offload.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/sound/core/compress_offload.c b/sound/core/compress_offload.c index 375f7a0d66ef..ec2118d0e27a 100644 --- a/sound/core/compress_offload.c +++ b/sound/core/compress_offload.c @@ -542,6 +542,10 @@ static int snd_compr_stop(struct snd_compr_stream *stream) if (!retval) { stream->runtime->state = SNDRV_PCM_STATE_SETUP; wake_up(&stream->runtime->sleep); + stream->runtime->hw_pointer = 0; + stream->runtime->app_pointer = 0; + stream->runtime->total_bytes_available = 0; + stream->runtime->total_bytes_transferred = 0; } return retval; } From edfe3bfc1b779ddda9bcff523eb022dda37b93c8 Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Tue, 12 Jun 2012 13:15:12 +0200 Subject: [PATCH 26/30] ALSA: HDA: Pin fixup for Zotac Z68 motherboard Pin 0x1b was connected to the front panel connector, which according to the HDA standard should contain a mic and a headphone. In this case, the headphone was listed as "line out" by BIOS. Cc: stable@kernel.org BugLink: https://bugs.launchpad.net/bugs/993162 Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 224410e8e9e7..b8966817ccfb 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6439,6 +6439,7 @@ enum { ALC662_FIXUP_ASUS_MODE7, ALC662_FIXUP_ASUS_MODE8, ALC662_FIXUP_NO_JACK_DETECT, + ALC662_FIXUP_ZOTAC_Z68, }; static const struct alc_fixup alc662_fixups[] = { @@ -6588,6 +6589,13 @@ static const struct alc_fixup alc662_fixups[] = { .type = ALC_FIXUP_FUNC, .v.func = alc_fixup_no_jack_detect, }, + [ALC662_FIXUP_ZOTAC_Z68] = { + .type = ALC_FIXUP_PINS, + .v.pins = (const struct alc_pincfg[]) { + { 0x1b, 0x02214020 }, /* Front HP */ + { } + } + }, }; static const struct snd_pci_quirk alc662_fixup_tbl[] = { @@ -6601,6 +6609,7 @@ static const struct snd_pci_quirk alc662_fixup_tbl[] = { SND_PCI_QUIRK(0x144d, 0xc051, "Samsung R720", ALC662_FIXUP_IDEAPAD), SND_PCI_QUIRK(0x17aa, 0x38af, "Lenovo Ideapad Y550P", ALC662_FIXUP_IDEAPAD), SND_PCI_QUIRK(0x17aa, 0x3a0d, "Lenovo Ideapad Y550", ALC662_FIXUP_IDEAPAD), + SND_PCI_QUIRK(0x19da, 0xa130, "Zotac Z68", ALC662_FIXUP_ZOTAC_Z68), SND_PCI_QUIRK(0x1b35, 0x2206, "CZC P10T", ALC662_FIXUP_CZC_P10T), #if 0 From 2e8b2b29d1f904353c3e54b342ccb8c66390dab8 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 13 Jun 2012 16:47:32 +0200 Subject: [PATCH 27/30] ALSA: hda - Don't forget to call init verbs added by fixup list During the split to the auto-parser helper functions, the actual call of init verbs was lost. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=43366 Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_conexant.c | 2 +- sound/pci/hda/patch_realtek.c | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index 3acb5824ad39..172370b3793b 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -4061,7 +4061,7 @@ static void cx_auto_init_digital(struct hda_codec *codec) static int cx_auto_init(struct hda_codec *codec) { struct conexant_spec *spec = codec->spec; - /*snd_hda_sequence_write(codec, cx_auto_init_verbs);*/ + snd_hda_gen_apply_verbs(codec); cx_auto_init_output(codec); cx_auto_init_input(codec); cx_auto_init_digital(codec); diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index b8966817ccfb..f8f4906e498d 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -1896,6 +1896,7 @@ static int alc_init(struct hda_codec *codec) alc_fix_pll(codec); alc_auto_init_amp(codec, spec->init_amp); + snd_hda_gen_apply_verbs(codec); alc_init_special_input_src(codec); alc_auto_init_std(codec); From 7fb75db139965c1955bf6bbde62a357f9843286d Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Sun, 17 Jun 2012 13:44:27 +0200 Subject: [PATCH 28/30] ALSA: snd-usb: fix sync pipe check Fix a bogus sanity check for sync pipe in pcm.c. This flaw was introduced during the streaming logic refactorization. While at it, improve the error messages that are generated in such cases. Signed-off-by: Daniel Mack Reported-and-tested-by: Signed-off-by: Takashi Iwai --- sound/usb/pcm.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c index cdf8b7601973..fc7ce7c1b4fa 100644 --- a/sound/usb/pcm.c +++ b/sound/usb/pcm.c @@ -354,17 +354,21 @@ static int set_format(struct snd_usb_substream *subs, struct audioformat *fmt) (get_endpoint(alts, 1)->bLength >= USB_DT_ENDPOINT_AUDIO_SIZE && get_endpoint(alts, 1)->bSynchAddress != 0 && !implicit_fb)) { - snd_printk(KERN_ERR "%d:%d:%d : invalid synch pipe\n", - dev->devnum, fmt->iface, fmt->altsetting); + snd_printk(KERN_ERR "%d:%d:%d : invalid sync pipe. bmAttributes %02x, bLength %d, bSynchAddress %02x\n", + dev->devnum, fmt->iface, fmt->altsetting, + get_endpoint(alts, 1)->bmAttributes, + get_endpoint(alts, 1)->bLength, + get_endpoint(alts, 1)->bSynchAddress); return -EINVAL; } ep = get_endpoint(alts, 1)->bEndpointAddress; - if (get_endpoint(alts, 0)->bLength >= USB_DT_ENDPOINT_AUDIO_SIZE && + if (!implicit_fb && + get_endpoint(alts, 0)->bLength >= USB_DT_ENDPOINT_AUDIO_SIZE && (( is_playback && ep != (unsigned int)(get_endpoint(alts, 0)->bSynchAddress | USB_DIR_IN)) || - (!is_playback && ep != (unsigned int)(get_endpoint(alts, 0)->bSynchAddress & ~USB_DIR_IN)) || - ( is_playback && !implicit_fb))) { - snd_printk(KERN_ERR "%d:%d:%d : invalid synch pipe\n", - dev->devnum, fmt->iface, fmt->altsetting); + (!is_playback && ep != (unsigned int)(get_endpoint(alts, 0)->bSynchAddress & ~USB_DIR_IN)))) { + snd_printk(KERN_ERR "%d:%d:%d : invalid sync pipe. is_playback %d, ep %02x, bSynchAddress %02x\n", + dev->devnum, fmt->iface, fmt->altsetting, + is_playback, ep, get_endpoint(alts, 0)->bSynchAddress); return -EINVAL; } From afe25967ecf66b38d94d374f0fcb5f4add458a4c Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Sat, 16 Jun 2012 16:58:04 +0200 Subject: [PATCH 29/30] ALSA: snd-usb: make snd_usb_substream_capture_trigger static Signed-off-by: Daniel Mack Signed-off-by: Takashi Iwai --- sound/usb/pcm.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c index fc7ce7c1b4fa..54607f8c4f66 100644 --- a/sound/usb/pcm.c +++ b/sound/usb/pcm.c @@ -1151,7 +1151,8 @@ static int snd_usb_substream_playback_trigger(struct snd_pcm_substream *substrea return -EINVAL; } -int snd_usb_substream_capture_trigger(struct snd_pcm_substream *substream, int cmd) +static int snd_usb_substream_capture_trigger(struct snd_pcm_substream *substream, + int cmd) { int err; struct snd_usb_substream *subs = substream->runtime->private_data; From b4a91cf05c33d4ab5b2b3738a257a3fe49b462bd Mon Sep 17 00:00:00 2001 From: Dylan Reid Date: Fri, 15 Jun 2012 19:36:23 -0700 Subject: [PATCH 30/30] ALSA: hda - Handle open while transitioning to D3. This addresses an issue encountered when a pcm is opened while transitioning to low power state (codec->power_on == 1 && codec->power_transition == -1). Add snd_pcm_power_up_d3wait to hda_codec. This function is used to power up from azx_open as opposed to snd_hda_power_up used from codec_exec_verb. When powering up from azx_open, wait for pending power downs to complete, avoiding the power up continuing in parallel with the power down on the work queue. The specific issue seen was with the CS4210 codec, it powers off the ADC and DAC nid in its suspend handler. If it is re-opened before the ~100ms power down process completes, the ADC and DAC nid are initialized while powered down and audio is lost until another suspend/resume cycle. Signed-off-by: Dylan Reid Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_codec.c | 46 +++++++++++++++++++++++++++++++-------- sound/pci/hda/hda_codec.h | 2 ++ sound/pci/hda/hda_intel.c | 2 +- 3 files changed, 40 insertions(+), 10 deletions(-) diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index 41ca803a1fff..7504e62188d6 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -4393,20 +4393,19 @@ void snd_hda_update_power_acct(struct hda_codec *codec) codec->power_jiffies += delta; } -/** - * snd_hda_power_up - Power-up the codec - * @codec: HD-audio codec - * - * Increment the power-up counter and power up the hardware really when - * not turned on yet. - */ -void snd_hda_power_up(struct hda_codec *codec) +/* Transition to powered up, if wait_power_down then wait for a pending + * transition to D3 to complete. A pending D3 transition is indicated + * with power_transition == -1. */ +static void __snd_hda_power_up(struct hda_codec *codec, bool wait_power_down) { struct hda_bus *bus = codec->bus; spin_lock(&codec->power_lock); codec->power_count++; - if (codec->power_on || codec->power_transition > 0) { + /* Return if power_on or transitioning to power_on, unless currently + * powering down. */ + if ((codec->power_on || codec->power_transition > 0) && + !(wait_power_down && codec->power_transition < 0)) { spin_unlock(&codec->power_lock); return; } @@ -4430,8 +4429,37 @@ void snd_hda_power_up(struct hda_codec *codec) codec->power_transition = 0; spin_unlock(&codec->power_lock); } + +/** + * snd_hda_power_up - Power-up the codec + * @codec: HD-audio codec + * + * Increment the power-up counter and power up the hardware really when + * not turned on yet. + */ +void snd_hda_power_up(struct hda_codec *codec) +{ + __snd_hda_power_up(codec, false); +} EXPORT_SYMBOL_HDA(snd_hda_power_up); +/** + * snd_hda_power_up_d3wait - Power-up the codec after waiting for any pending + * D3 transition to complete. This differs from snd_hda_power_up() when + * power_transition == -1. snd_hda_power_up sees this case as a nop, + * snd_hda_power_up_d3wait waits for the D3 transition to complete then powers + * back up. + * @codec: HD-audio codec + * + * Cancel any power down operation hapenning on the work queue, then power up. + */ +void snd_hda_power_up_d3wait(struct hda_codec *codec) +{ + /* This will cancel and wait for pending power_work to complete. */ + __snd_hda_power_up(codec, true); +} +EXPORT_SYMBOL_HDA(snd_hda_power_up_d3wait); + #define power_save(codec) \ ((codec)->bus->power_save ? *(codec)->bus->power_save : 0) diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h index 4fc3960c8591..2fdaadbb4326 100644 --- a/sound/pci/hda/hda_codec.h +++ b/sound/pci/hda/hda_codec.h @@ -1056,10 +1056,12 @@ const char *snd_hda_get_jack_location(u32 cfg); */ #ifdef CONFIG_SND_HDA_POWER_SAVE void snd_hda_power_up(struct hda_codec *codec); +void snd_hda_power_up_d3wait(struct hda_codec *codec); void snd_hda_power_down(struct hda_codec *codec); void snd_hda_update_power_acct(struct hda_codec *codec); #else static inline void snd_hda_power_up(struct hda_codec *codec) {} +static inline void snd_hda_power_up_d3wait(struct hda_codec *codec) {} static inline void snd_hda_power_down(struct hda_codec *codec) {} #endif diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 02763827dde0..7757536b9d5f 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -1766,7 +1766,7 @@ static int azx_pcm_open(struct snd_pcm_substream *substream) buff_step); snd_pcm_hw_constraint_step(runtime, 0, SNDRV_PCM_HW_PARAM_PERIOD_BYTES, buff_step); - snd_hda_power_up(apcm->codec); + snd_hda_power_up_d3wait(apcm->codec); err = hinfo->ops.open(hinfo, apcm->codec, substream); if (err < 0) { azx_release_device(azx_dev);