diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 0b506af51a50..df76e7f1141c 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -87,6 +87,8 @@
 #define AT803X_PSSR_MR_AN_COMPLETE		0x0200
 
 #define AT803X_DEBUG_REG_0			0x00
+#define QCA8327_DEBUG_MANU_CTRL_EN		BIT(2)
+#define QCA8337_DEBUG_MANU_CTRL_EN		GENMASK(3, 2)
 #define AT803X_DEBUG_RX_CLK_DLY_EN		BIT(15)
 
 #define AT803X_DEBUG_REG_5			0x05
@@ -1317,9 +1319,37 @@ static int qca83xx_config_init(struct phy_device *phydev)
 		break;
 	}
 
+	/* QCA8327 require DAC amplitude adjustment for 100m set to +6%.
+	 * Disable on init and enable only with 100m speed following
+	 * qca original source code.
+	 */
+	if (phydev->drv->phy_id == QCA8327_A_PHY_ID ||
+	    phydev->drv->phy_id == QCA8327_B_PHY_ID)
+		at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0,
+				      QCA8327_DEBUG_MANU_CTRL_EN, 0);
+
 	return 0;
 }
 
+static void qca83xx_link_change_notify(struct phy_device *phydev)
+{
+	/* QCA8337 doesn't require DAC Amplitude adjustement */
+	if (phydev->drv->phy_id == QCA8337_PHY_ID)
+		return;
+
+	/* Set DAC Amplitude adjustment to +6% for 100m on link running */
+	if (phydev->state == PHY_RUNNING) {
+		if (phydev->speed == SPEED_100)
+			at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0,
+					      QCA8327_DEBUG_MANU_CTRL_EN,
+					      QCA8327_DEBUG_MANU_CTRL_EN);
+	} else {
+		/* Reset DAC Amplitude adjustment */
+		at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0,
+				      QCA8327_DEBUG_MANU_CTRL_EN, 0);
+	}
+}
+
 static int qca83xx_resume(struct phy_device *phydev)
 {
 	int ret, val;
@@ -1489,6 +1519,7 @@ static struct phy_driver at803x_driver[] = {
 	.phy_id_mask		= QCA8K_PHY_ID_MASK,
 	.name			= "Qualcomm Atheros 8337 internal PHY",
 	/* PHY_GBIT_FEATURES */
+	.link_change_notify	= qca83xx_link_change_notify,
 	.probe			= at803x_probe,
 	.flags			= PHY_IS_INTERNAL,
 	.config_init		= qca83xx_config_init,
@@ -1504,6 +1535,7 @@ static struct phy_driver at803x_driver[] = {
 	.phy_id_mask		= QCA8K_PHY_ID_MASK,
 	.name			= "Qualcomm Atheros 8327-A internal PHY",
 	/* PHY_GBIT_FEATURES */
+	.link_change_notify	= qca83xx_link_change_notify,
 	.probe			= at803x_probe,
 	.flags			= PHY_IS_INTERNAL,
 	.config_init		= qca83xx_config_init,
@@ -1519,6 +1551,7 @@ static struct phy_driver at803x_driver[] = {
 	.phy_id_mask		= QCA8K_PHY_ID_MASK,
 	.name			= "Qualcomm Atheros 8327-B internal PHY",
 	/* PHY_GBIT_FEATURES */
+	.link_change_notify	= qca83xx_link_change_notify,
 	.probe			= at803x_probe,
 	.flags			= PHY_IS_INTERNAL,
 	.config_init		= qca83xx_config_init,