iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

pinctrl: Ingenic: Add support for read the pin configuration of X1830.

Browse Source 
Add X1830 support in "ingenic_pinconf_get()", so that it can read the
configuration of X1830 SoC correctly.

Fixes: d7da2a1e4e08 ("pinctrl: Ingenic: Add pinctrl driver for X1830.")
Cc: <stable@vger.kernel.org>
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/1618757073-1724-3-git-send-email-zhouyanjie@wanyeetech.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
周琰杰 (Zhou Yanjie) 2021-04-18 22:44:23 +08:00 committed by Linus Walleij
parent 65afd97630
commit 1d0bd580ef
1 changed files with 31 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

40
drivers/pinctrl/pinctrl-ingenic.c
View File

@ -2109,26 +2109,48 @@ static int ingenic_pinconf_get(struct pinctrl_dev *pctldev,
enum pin_config_param param = pinconf_to_config_param(*config);
unsigned int idx = pin % PINS_PER_GPIO_CHIP;
unsigned int offt = pin / PINS_PER_GPIO_CHIP;
bool pull;
unsigned int bias;
bool pull, pullup, pulldown;
if (jzpc->info->version >= ID_JZ4770)
pull = !ingenic_get_pin_config(jzpc, pin, JZ4770_GPIO_PEN);
else
pull = !ingenic_get_pin_config(jzpc, pin, JZ4740_GPIO_PULL_DIS);
if (jzpc->info->version >= ID_X1830) {
unsigned int half = PINS_PER_GPIO_CHIP / 2;
unsigned int idxh = (pin % half) * 2;
if (idx < half)
regmap_read(jzpc->map, offt * jzpc->info->reg_offset +
X1830_GPIO_PEL, &bias);
else
regmap_read(jzpc->map, offt * jzpc->info->reg_offset +
X1830_GPIO_PEH, &bias);
bias = (bias >> idxh) & (GPIO_PULL_UP | GPIO_PULL_DOWN);
pullup = (bias == GPIO_PULL_UP) && (jzpc->info->pull_ups[offt] & BIT(idx));
pulldown = (bias == GPIO_PULL_DOWN) && (jzpc->info->pull_downs[offt] & BIT(idx));
} else {
if (jzpc->info->version >= ID_JZ4770)
pull = !ingenic_get_pin_config(jzpc, pin, JZ4770_GPIO_PEN);
else
pull = !ingenic_get_pin_config(jzpc, pin, JZ4740_GPIO_PULL_DIS);
pullup = pull && (jzpc->info->pull_ups[offt] & BIT(idx));
pulldown = pull && (jzpc->info->pull_downs[offt] & BIT(idx));
}
switch (param) {
case PIN_CONFIG_BIAS_DISABLE:
if (pull)
if (pullup || pulldown)
return -EINVAL;
break;
case PIN_CONFIG_BIAS_PULL_UP:
if (!pull || !(jzpc->info->pull_ups[offt] & BIT(idx)))
if (!pullup)
return -EINVAL;
break;
case PIN_CONFIG_BIAS_PULL_DOWN:
if (!pull || !(jzpc->info->pull_downs[offt] & BIT(idx)))
if (!pulldown)
return -EINVAL;
break;
@ -2146,7 +2168,7 @@ static void ingenic_set_bias(struct ingenic_pinctrl *jzpc,
if (jzpc->info->version >= ID_X1830) {
unsigned int idx = pin % PINS_PER_GPIO_CHIP;
unsigned int half = PINS_PER_GPIO_CHIP / 2;
unsigned int idxh = pin % half * 2;
unsigned int idxh = (pin % half) * 2;
unsigned int offt = pin / PINS_PER_GPIO_CHIP;
if (idx < half) {