Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

arch/arm/mach-shark/core.c

@@ -0,0 +1,114 @@
+/*
+ *  linux/arch/arm/mach-shark/arch.c
+ *
+ *  Architecture specific stuff.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/serial_8250.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/io.h>
+#include <asm/leds.h>
+#include <asm/param.h>
+
+#include <asm/mach/map.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+static struct plat_serial8250_port serial_platform_data[] = {
+	{
+		.iobase		= 0x3f8,
+		.irq		= 4,
+		.uartclk	= 1843200,
+		.regshift	= 2,
+		.iotype		= UPIO_PORT,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+	},
+	{
+		.iobase		= 0x2f8,
+		.irq		= 3,
+		.uartclk	= 1843200,
+		.regshift	= 2,
+		.iotype		= UPIO_PORT,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+	},
+	{ },
+};
+
+static struct platform_device serial_device = {
+	.name			= "serial8250",
+	.id			= 0,
+	.dev			= {
+		.platform_data	= serial_platform_data,
+	},
+};
+
+static int __init shark_init(void)
+{
+	int ret;
+
+	if (machine_is_shark())
+		ret = platform_device_register(&serial_device);
+
+	return ret;
+}
+
+arch_initcall(shark_init);
+
+extern void shark_init_irq(void);
+
+static struct map_desc shark_io_desc[] __initdata = {
+	{ IO_BASE	, IO_START	, IO_SIZE	, MT_DEVICE }
+};
+
+static void __init shark_map_io(void)
+{
+	iotable_init(shark_io_desc, ARRAY_SIZE(shark_io_desc));
+}
+
+#define IRQ_TIMER 0
+#define HZ_TIME ((1193180 + HZ/2) / HZ)
+
+static irqreturn_t
+shark_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	write_seqlock(&xtime_lock);
+	timer_tick(regs);
+	write_sequnlock(&xtime_lock);
+	return IRQ_HANDLED;
+}
+
+static struct irqaction shark_timer_irq = {
+	.name		= "Shark Timer Tick",
+	.flags		= SA_INTERRUPT,
+	.handler	= shark_timer_interrupt
+};
+
+/*
+ * Set up timer interrupt, and return the current time in seconds.
+ */
+static void __init shark_timer_init(void)
+{
+	outb(0x34, 0x43);               /* binary, mode 0, LSB/MSB, Ch 0 */
+	outb(HZ_TIME & 0xff, 0x40);     /* LSB of count */
+	outb(HZ_TIME >> 8, 0x40);
+
+	setup_irq(IRQ_TIMER, &shark_timer_irq);
+}
+
+static struct sys_timer shark_timer = {
+	.init		= shark_timer_init,
+};
+
+MACHINE_START(SHARK, "Shark")
+	MAINTAINER("Alexander Schulz")
+	BOOT_MEM(0x08000000, 0x40000000, 0xe0000000)
+	BOOT_PARAMS(0x08003000)
+	MAPIO(shark_map_io)
+	INITIRQ(shark_init_irq)
+	.timer		= &shark_timer,
+MACHINE_END