iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

wifi: ath12k: fix and enable AP mode for WCN7850

Browse Source 
[ Upstream commit ed7e818a7b501012038d6bc6fedadaf7375a380a ]

For AP mode, the peer is created earlier in ath12k_mac_op_add_interface() but
ath12k_mac_op_assign_vif_chanctx() will try to create peer again.  Then an
error will return which makes AP mode startup fail.

Kernel log:

[ 5017.665006] ath12k_pci 0000:04:00.0: failed to create peer after vdev start delay: -22

wpa_supplicant log:

Failed to set beacon parameters
Interface initialization failed
wls1: interface state UNINITIALIZED->DISABLED
wls1: AP-DISABLED
wls1: Unable to setup interface.
Failed to initialize AP interface
wls1: interface state DISABLED->DISABLED
wls1: AP-DISABLED

So fix this check and enable AP mode for WCN7850, as now AP mode works normally.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4

Signed-off-by: Kang Yang <quic_kangyang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231121022459.17209-1-quic_kangyang@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
This commit is contained in:
Kang Yang 2023-12-01 18:09:48 +02:00 committed by Greg Kroah-Hartman
parent a9bf3a490e
commit 1f4fd12d2a
2 changed files with 4 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
drivers/net/wireless/ath/ath12k/hw.c
View File

@ -942,7 +942,8 @@ static const struct ath12k_hw_params ath12k_hw_params[] = {
.rx_mac_buf_ring = true,
.vdev_start_delay = true,
.interface_modes = BIT(NL80211_IFTYPE_STATION),
.interface_modes = BIT(NL80211_IFTYPE_STATION) |
BIT(NL80211_IFTYPE_AP),
.supports_monitor = false,
.idle_ps = true,

4
drivers/net/wireless/ath/ath12k/mac.c
View File

@ -6196,8 +6196,8 @@ ath12k_mac_op_assign_vif_chanctx(struct ieee80211_hw *hw,
}
if (ab->hw_params->vdev_start_delay &&
(arvif->vdev_type == WMI_VDEV_TYPE_AP ||
arvif->vdev_type == WMI_VDEV_TYPE_MONITOR)) {
arvif->vdev_type != WMI_VDEV_TYPE_AP &&
arvif->vdev_type != WMI_VDEV_TYPE_MONITOR) {
param.vdev_id = arvif->vdev_id;
param.peer_type = WMI_PEER_TYPE_DEFAULT;
param.peer_addr = ar->mac_addr;