From de5fad815703b5b24bc4726cd71422929537d259 Mon Sep 17 00:00:00 2001
From: Yoni Divinsky <yoni.divinsky@ti.com>
Date: Wed, 30 May 2012 11:36:39 +0300
Subject: [PATCH 01/15] mac80211: add op to configure default key id

There are hardwares which support offload of data packets
for example when auto ARP is enabled the hw will send
the ARP response. In such cases if WEP encryption is
configured the hw must know the default WEP key in order
to encrypt the packets correctly.

When hw_accel is enabled and encryption type is set to WEP,
the driver should get the default key index from mac80211.

Signed-off-by: Yoni Divinsky <yoni.divinsky@ti.com>
[cleanups, fixes, documentation]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 include/net/mac80211.h    | 10 ++++++++++
 net/mac80211/driver-ops.h | 16 ++++++++++++++++
 net/mac80211/key.c        |  5 ++++-
 net/mac80211/trace.h      | 23 +++++++++++++++++++++++
 4 files changed, 53 insertions(+), 1 deletion(-)

diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 3037f49e51c8..e0825a9dbfea 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -1630,6 +1630,10 @@ void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb);
  * rekeying), it will not include a valid phase 1 key. The valid phase 1 key is
  * provided by update_tkip_key only. The trigger that makes mac80211 call this
  * handler is software decryption with wrap around of iv16.
+ *
+ * The set_default_unicast_key() call updates the default WEP key index
+ * configured to the hardware for WEP encryption type. This is required
+ * for devices that support offload of data packets (e.g. ARP responses).
  */
 
 /**
@@ -2208,6 +2212,10 @@ enum ieee80211_rate_control_changed {
  *	After rekeying was done it should (for example during resume) notify
  *	userspace of the new replay counter using ieee80211_gtk_rekey_notify().
  *
+ * @set_default_unicast_key: Set the default (unicast) key index, useful for
+ *	WEP when the device sends data packets autonomously, e.g. for ARP
+ *	offloading. The index can be 0-3, or -1 for unsetting it.
+ *
  * @hw_scan: Ask the hardware to service the scan request, no need to start
  *	the scan state machine in stack. The scan must honour the channel
  *	configuration done by the regulatory agent in the wiphy's
@@ -2539,6 +2547,8 @@ struct ieee80211_ops {
 	void (*set_rekey_data)(struct ieee80211_hw *hw,
 			       struct ieee80211_vif *vif,
 			       struct cfg80211_gtk_rekey_data *data);
+	void (*set_default_unicast_key)(struct ieee80211_hw *hw,
+					struct ieee80211_vif *vif, int idx);
 	int (*hw_scan)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 		       struct cfg80211_scan_request *req);
 	void (*cancel_hw_scan)(struct ieee80211_hw *hw,
diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h
index 0c07f94c5378..e6033b06caba 100644
--- a/net/mac80211/driver-ops.h
+++ b/net/mac80211/driver-ops.h
@@ -1020,4 +1020,20 @@ static inline void drv_restart_complete(struct ieee80211_local *local)
 	trace_drv_return_void(local);
 }
 
+static inline void
+drv_set_default_unicast_key(struct ieee80211_local *local,
+			    struct ieee80211_sub_if_data *sdata,
+			    int key_idx)
+{
+	check_sdata_in_driver(sdata);
+
+	WARN_ON_ONCE(key_idx < -1 || key_idx > 3);
+
+	trace_drv_set_default_unicast_key(local, sdata, key_idx);
+	if (local->ops->set_default_unicast_key)
+		local->ops->set_default_unicast_key(&local->hw, &sdata->vif,
+						    key_idx);
+	trace_drv_return_void(local);
+}
+
 #endif /* __MAC80211_DRIVER_OPS */
diff --git a/net/mac80211/key.c b/net/mac80211/key.c
index 619c5d697999..ef252eb58c36 100644
--- a/net/mac80211/key.c
+++ b/net/mac80211/key.c
@@ -204,8 +204,11 @@ static void __ieee80211_set_default_key(struct ieee80211_sub_if_data *sdata,
 	if (idx >= 0 && idx < NUM_DEFAULT_KEYS)
 		key = key_mtx_dereference(sdata->local, sdata->keys[idx]);
 
-	if (uni)
+	if (uni) {
 		rcu_assign_pointer(sdata->default_unicast_key, key);
+		drv_set_default_unicast_key(sdata->local, sdata, idx);
+	}
+
 	if (multi)
 		rcu_assign_pointer(sdata->default_multicast_key, key);
 
diff --git a/net/mac80211/trace.h b/net/mac80211/trace.h
index 41861b91daa3..9341b9359b66 100644
--- a/net/mac80211/trace.h
+++ b/net/mac80211/trace.h
@@ -1821,6 +1821,29 @@ TRACE_EVENT(stop_queue,
 	)
 );
 
+TRACE_EVENT(drv_set_default_unicast_key,
+	TP_PROTO(struct ieee80211_local *local,
+		 struct ieee80211_sub_if_data *sdata,
+		 int key_idx),
+
+	TP_ARGS(local, sdata, key_idx),
+
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+		VIF_ENTRY
+		__field(int, key_idx)
+	),
+
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+		VIF_ASSIGN;
+		__entry->key_idx = key_idx;
+	),
+
+	TP_printk(LOCAL_PR_FMT VIF_PR_FMT " key_idx:%d",
+		  LOCAL_PR_ARG, VIF_PR_ARG, __entry->key_idx)
+);
+
 #ifdef CONFIG_MAC80211_MESSAGE_TRACING
 #undef TRACE_SYSTEM
 #define TRACE_SYSTEM mac80211_msg

From 0f19b41e223d787251c59137e61fc5145c13d1c4 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Mon, 14 Jan 2013 16:39:07 +0100
Subject: [PATCH 02/15] mac80211: remove ARP filter enable/disable logic

Depending on the driver, having ARP filtering for
some addresses may be possible. Remove the logic
that tracks whether ARP filter is enabled or not
and give the driver the total number of addresses
instead of the length of the list so it can make
its own decision.

Reviewed-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 .../wireless/brcm80211/brcmsmac/mac80211_if.c    |  5 ++---
 drivers/net/wireless/ti/wlcore/main.c            |  3 +--
 include/net/mac80211.h                           | 11 ++++-------
 net/mac80211/ieee80211_i.h                       |  2 --
 net/mac80211/iface.c                             |  3 ---
 net/mac80211/main.c                              | 16 ++++------------
 net/mac80211/mlme.c                              |  8 ++------
 net/mac80211/trace.h                             | 13 +++++++++----
 8 files changed, 22 insertions(+), 39 deletions(-)

diff --git a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
index f0fc8cd4d5df..e4b42f7e659c 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
@@ -539,9 +539,8 @@ brcms_ops_bss_info_changed(struct ieee80211_hw *hw,
 
 	if (changed & BSS_CHANGED_ARP_FILTER) {
 		/* Hardware ARP filter address list or state changed */
-		brcms_err(core, "%s: arp filtering: enabled %s, count %d"
-			  " (implement)\n", __func__, info->arp_filter_enabled ?
-			  "true" : "false", info->arp_addr_cnt);
+		brcms_err(core, "%s: arp filtering: %d addresses"
+			  " (implement)\n", __func__, info->arp_addr_cnt);
 	}
 
 	if (changed & BSS_CHANGED_QOS) {
diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index ce6e62a37e14..919ad70cc520 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -4113,8 +4113,7 @@ sta_not_found:
 		wlvif->sta.qos = bss_conf->qos;
 		WARN_ON(wlvif->bss_type != BSS_TYPE_STA_BSS);
 
-		if (bss_conf->arp_addr_cnt == 1 &&
-		    bss_conf->arp_filter_enabled) {
+		if (bss_conf->arp_addr_cnt == 1 && bss_conf->assoc) {
 			wlvif->ip_addr = addr;
 			/*
 			 * The template should have been configured only upon
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index e0825a9dbfea..679ad4bb222b 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -297,11 +297,9 @@ enum ieee80211_rssi_event {
  *	may filter ARP queries targeted for other addresses than listed here.
  *	The driver must allow ARP queries targeted for all address listed here
  *	to pass through. An empty list implies no ARP queries need to pass.
- * @arp_addr_cnt: Number of addresses currently on the list.
- * @arp_filter_enabled: Enable ARP filtering - if enabled, the hardware may
- *	filter ARP queries based on the @arp_addr_list, if disabled, the
- *	hardware must not perform any ARP filtering. Note, that the filter will
- *	be enabled also in promiscuous mode.
+ * @arp_addr_cnt: Number of addresses currently on the list. Note that this
+ *	may be larger than %IEEE80211_BSS_ARP_ADDR_LIST_LEN (the arp_addr_list
+ *	array size), it's up to the driver what to do in that case.
  * @qos: This is a QoS-enabled BSS.
  * @idle: This interface is idle. There's also a global idle flag in the
  *	hardware config which may be more appropriate depending on what
@@ -338,8 +336,7 @@ struct ieee80211_bss_conf {
 	u32 cqm_rssi_hyst;
 	struct cfg80211_chan_def chandef;
 	__be32 arp_addr_list[IEEE80211_BSS_ARP_ADDR_LIST_LEN];
-	u8 arp_addr_cnt;
-	bool arp_filter_enabled;
+	int arp_addr_cnt;
 	bool qos;
 	bool idle;
 	bool ps;
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 0fa44a965ad9..b1fed5491ed6 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -747,8 +747,6 @@ struct ieee80211_sub_if_data {
 	struct work_struct work;
 	struct sk_buff_head skb_queue;
 
-	bool arp_filter_state;
-
 	u8 needed_rx_chains;
 	enum ieee80211_smps_mode smps_mode;
 
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index 06fac2991d40..0a36dc6346bb 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -1574,9 +1574,6 @@ int ieee80211_if_add(struct ieee80211_local *local, const char *name,
 	/* initialise type-independent data */
 	sdata->wdev.wiphy = local->hw.wiphy;
 	sdata->local = local;
-#ifdef CONFIG_INET
-	sdata->arp_filter_state = true;
-#endif
 
 	for (i = 0; i < IEEE80211_FRAGMENT_MAX; i++)
 		skb_queue_head_init(&sdata->fragments[i].skb_list);
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 39cfe8f10ad2..baf9720c1876 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -349,27 +349,19 @@ static int ieee80211_ifa_changed(struct notifier_block *nb,
 
 	/* Copy the addresses to the bss_conf list */
 	ifa = idev->ifa_list;
-	while (c < IEEE80211_BSS_ARP_ADDR_LIST_LEN && ifa) {
-		bss_conf->arp_addr_list[c] = ifa->ifa_address;
+	while (ifa) {
+		if (c < IEEE80211_BSS_ARP_ADDR_LIST_LEN)
+			bss_conf->arp_addr_list[c] = ifa->ifa_address;
 		ifa = ifa->ifa_next;
 		c++;
 	}
 
-	/* If not all addresses fit the list, disable filtering */
-	if (ifa) {
-		sdata->arp_filter_state = false;
-		c = 0;
-	} else {
-		sdata->arp_filter_state = true;
-	}
 	bss_conf->arp_addr_cnt = c;
 
 	/* Configure driver only if associated (which also implies it is up) */
-	if (ifmgd->associated) {
-		bss_conf->arp_filter_enabled = sdata->arp_filter_state;
+	if (ifmgd->associated)
 		ieee80211_bss_info_change_notify(sdata,
 						 BSS_CHANGED_ARP_FILTER);
-	}
 
 	mutex_unlock(&ifmgd->mtx);
 
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index e930175771ff..2d9ef20cd38d 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -1465,10 +1465,8 @@ static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata,
 		bss_info_changed |= BSS_CHANGED_CQM;
 
 	/* Enable ARP filtering */
-	if (bss_conf->arp_filter_enabled != sdata->arp_filter_state) {
-		bss_conf->arp_filter_enabled = sdata->arp_filter_state;
+	if (bss_conf->arp_addr_cnt)
 		bss_info_changed |= BSS_CHANGED_ARP_FILTER;
-	}
 
 	ieee80211_bss_info_change_notify(sdata, bss_info_changed);
 
@@ -1582,10 +1580,8 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata,
 	cancel_work_sync(&local->dynamic_ps_enable_work);
 
 	/* Disable ARP filtering */
-	if (sdata->vif.bss_conf.arp_filter_enabled) {
-		sdata->vif.bss_conf.arp_filter_enabled = false;
+	if (sdata->vif.bss_conf.arp_addr_cnt)
 		changed |= BSS_CHANGED_ARP_FILTER;
-	}
 
 	sdata->vif.bss_conf.qos = false;
 	changed |= BSS_CHANGED_QOS;
diff --git a/net/mac80211/trace.h b/net/mac80211/trace.h
index 9341b9359b66..e9f95913c6f0 100644
--- a/net/mac80211/trace.h
+++ b/net/mac80211/trace.h
@@ -347,8 +347,11 @@ TRACE_EVENT(drv_bss_info_changed,
 		__field(s32, cqm_rssi_hyst);
 		__field(u32, channel_width);
 		__field(u32, channel_cfreq1);
-		__dynamic_array(u32, arp_addr_list, info->arp_addr_cnt);
-		__field(bool, arp_filter_enabled);
+		__dynamic_array(u32, arp_addr_list,
+				info->arp_addr_cnt > IEEE80211_BSS_ARP_ADDR_LIST_LEN ?
+					IEEE80211_BSS_ARP_ADDR_LIST_LEN :
+					info->arp_addr_cnt);
+		__field(int, arp_addr_cnt);
 		__field(bool, qos);
 		__field(bool, idle);
 		__field(bool, ps);
@@ -384,9 +387,11 @@ TRACE_EVENT(drv_bss_info_changed,
 		__entry->cqm_rssi_hyst = info->cqm_rssi_hyst;
 		__entry->channel_width = info->chandef.width;
 		__entry->channel_cfreq1 = info->chandef.center_freq1;
+		__entry->arp_addr_cnt = info->arp_addr_cnt;
 		memcpy(__get_dynamic_array(arp_addr_list), info->arp_addr_list,
-		       sizeof(u32) * info->arp_addr_cnt);
-		__entry->arp_filter_enabled = info->arp_filter_enabled;
+		       sizeof(u32) * (info->arp_addr_cnt > IEEE80211_BSS_ARP_ADDR_LIST_LEN ?
+					IEEE80211_BSS_ARP_ADDR_LIST_LEN :
+					info->arp_addr_cnt));
 		__entry->qos = info->qos;
 		__entry->idle = info->idle;
 		__entry->ps = info->ps;

From 0a214d3f7e5041685ebff054628a4354bedd78c3 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Wed, 16 Jan 2013 10:39:44 +0100
Subject: [PATCH 03/15] mac80211: improve aggregation debug messages

A lot of the aggregation messages don't indicate the
station so they're hard to understand if there are
multiple sessions in progress. Make that easier by
adding the MAC address to most messages. Also add
the TID if it wasn't already there.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/mac80211/agg-rx.c | 14 +++++++++-----
 net/mac80211/agg-tx.c | 44 ++++++++++++++++++++++++++-----------------
 2 files changed, 36 insertions(+), 22 deletions(-)

diff --git a/net/mac80211/agg-rx.c b/net/mac80211/agg-rx.c
index 808338a1bce5..31bf2586fb84 100644
--- a/net/mac80211/agg-rx.c
+++ b/net/mac80211/agg-rx.c
@@ -83,8 +83,8 @@ void ___ieee80211_stop_rx_ba_session(struct sta_info *sta, u16 tid,
 	if (drv_ampdu_action(local, sta->sdata, IEEE80211_AMPDU_RX_STOP,
 			     &sta->sta, tid, NULL, 0))
 		sdata_info(sta->sdata,
-			   "HW problem - can not stop rx aggregation for tid %d\n",
-			   tid);
+			   "HW problem - can not stop rx aggregation for %pM tid %d\n",
+			   sta->sta.addr, tid);
 
 	/* check if this is a self generated aggregation halt */
 	if (initiator == WLAN_BACK_RECIPIENT && tx)
@@ -159,7 +159,8 @@ static void sta_rx_agg_session_timer_expired(unsigned long data)
 	}
 	rcu_read_unlock();
 
-	ht_dbg(sta->sdata, "rx session timer expired on tid %d\n", (u16)*ptid);
+	ht_dbg(sta->sdata, "RX session timer expired on %pM tid %d\n",
+	       sta->sta.addr, (u16)*ptid);
 
 	set_bit(*ptid, sta->ampdu_mlme.tid_rx_timer_expired);
 	ieee80211_queue_work(&sta->local->hw, &sta->ampdu_mlme.work);
@@ -247,7 +248,9 @@ void ieee80211_process_addba_request(struct ieee80211_local *local,
 	status = WLAN_STATUS_REQUEST_DECLINED;
 
 	if (test_sta_flag(sta, WLAN_STA_BLOCK_BA)) {
-		ht_dbg(sta->sdata, "Suspend in progress - Denying ADDBA request\n");
+		ht_dbg(sta->sdata,
+		       "Suspend in progress - Denying ADDBA request (%pM tid %d)\n",
+		       sta->sta.addr, tid);
 		goto end_no_lock;
 	}
 
@@ -317,7 +320,8 @@ void ieee80211_process_addba_request(struct ieee80211_local *local,
 
 	ret = drv_ampdu_action(local, sta->sdata, IEEE80211_AMPDU_RX_START,
 			       &sta->sta, tid, &start_seq_num, 0);
-	ht_dbg(sta->sdata, "Rx A-MPDU request on tid %d result %d\n", tid, ret);
+	ht_dbg(sta->sdata, "Rx A-MPDU request on %pM tid %d result %d\n",
+	       sta->sta.addr, tid, ret);
 	if (ret) {
 		kfree(tid_agg_rx->reorder_buf);
 		kfree(tid_agg_rx->reorder_time);
diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c
index 2f0ccbc5f13e..e90911819ed4 100644
--- a/net/mac80211/agg-tx.c
+++ b/net/mac80211/agg-tx.c
@@ -387,12 +387,13 @@ static void sta_addba_resp_timer_expired(unsigned long data)
 	    test_bit(HT_AGG_STATE_RESPONSE_RECEIVED, &tid_tx->state)) {
 		rcu_read_unlock();
 		ht_dbg(sta->sdata,
-		       "timer expired on tid %d but we are not (or no longer) expecting addBA response there\n",
-		       tid);
+		       "timer expired on %pM tid %d but we are not (or no longer) expecting addBA response there\n",
+		       sta->sta.addr, tid);
 		return;
 	}
 
-	ht_dbg(sta->sdata, "addBA response timer expired on tid %d\n", tid);
+	ht_dbg(sta->sdata, "addBA response timer expired on %pM tid %d\n",
+	       sta->sta.addr, tid);
 
 	ieee80211_stop_tx_ba_session(&sta->sta, tid);
 	rcu_read_unlock();
@@ -429,7 +430,8 @@ void ieee80211_tx_ba_session_handle_start(struct sta_info *sta, int tid)
 			       &sta->sta, tid, &start_seq_num, 0);
 	if (ret) {
 		ht_dbg(sdata,
-		       "BA request denied - HW unavailable for tid %d\n", tid);
+		       "BA request denied - HW unavailable for %pM tid %d\n",
+		       sta->sta.addr, tid);
 		spin_lock_bh(&sta->lock);
 		ieee80211_agg_splice_packets(sdata, tid_tx, tid);
 		ieee80211_assign_tid_tx(sta, tid, NULL);
@@ -442,7 +444,8 @@ void ieee80211_tx_ba_session_handle_start(struct sta_info *sta, int tid)
 
 	/* activate the timer for the recipient's addBA response */
 	mod_timer(&tid_tx->addba_resp_timer, jiffies + ADDBA_RESP_INTERVAL);
-	ht_dbg(sdata, "activated addBA response timer on tid %d\n", tid);
+	ht_dbg(sdata, "activated addBA response timer on %pM tid %d\n",
+	       sta->sta.addr, tid);
 
 	spin_lock_bh(&sta->lock);
 	sta->ampdu_mlme.last_addba_req_time[tid] = jiffies;
@@ -489,7 +492,8 @@ static void sta_tx_agg_session_timer_expired(unsigned long data)
 
 	rcu_read_unlock();
 
-	ht_dbg(sta->sdata, "tx session timer expired on tid %d\n", (u16)*ptid);
+	ht_dbg(sta->sdata, "tx session timer expired on %pM tid %d\n",
+	       sta->sta.addr, (u16)*ptid);
 
 	ieee80211_stop_tx_ba_session(&sta->sta, *ptid);
 }
@@ -525,7 +529,8 @@ int ieee80211_start_tx_ba_session(struct ieee80211_sta *pubsta, u16 tid,
 
 	if (test_sta_flag(sta, WLAN_STA_BLOCK_BA)) {
 		ht_dbg(sdata,
-		       "BA sessions blocked - Denying BA session request\n");
+		       "BA sessions blocked - Denying BA session request %pM tid %d\n",
+		       sta->sta.addr, tid);
 		return -EINVAL;
 	}
 
@@ -566,8 +571,8 @@ int ieee80211_start_tx_ba_session(struct ieee80211_sta *pubsta, u16 tid,
 	    time_before(jiffies, sta->ampdu_mlme.last_addba_req_time[tid] +
 			HT_AGG_RETRIES_PERIOD)) {
 		ht_dbg(sdata,
-		       "BA request denied - waiting a grace period after %d failed requests on tid %u\n",
-		       sta->ampdu_mlme.addba_req_num[tid], tid);
+		       "BA request denied - waiting a grace period after %d failed requests on %pM tid %u\n",
+		       sta->ampdu_mlme.addba_req_num[tid], sta->sta.addr, tid);
 		ret = -EBUSY;
 		goto err_unlock_sta;
 	}
@@ -576,8 +581,8 @@ int ieee80211_start_tx_ba_session(struct ieee80211_sta *pubsta, u16 tid,
 	/* check if the TID is not in aggregation flow already */
 	if (tid_tx || sta->ampdu_mlme.tid_start_tx[tid]) {
 		ht_dbg(sdata,
-		       "BA request denied - session is not idle on tid %u\n",
-		       tid);
+		       "BA request denied - session is not idle on %pM tid %u\n",
+		       sta->sta.addr, tid);
 		ret = -EAGAIN;
 		goto err_unlock_sta;
 	}
@@ -632,7 +637,8 @@ static void ieee80211_agg_tx_operational(struct ieee80211_local *local,
 
 	tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
 
-	ht_dbg(sta->sdata, "Aggregation is on for tid %d\n", tid);
+	ht_dbg(sta->sdata, "Aggregation is on for %pM tid %d\n",
+	       sta->sta.addr, tid);
 
 	drv_ampdu_action(local, sta->sdata,
 			 IEEE80211_AMPDU_TX_OPERATIONAL,
@@ -802,7 +808,9 @@ void ieee80211_stop_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u8 tid)
 	tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
 
 	if (!tid_tx || !test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state)) {
-		ht_dbg(sdata, "unexpected callback to A-MPDU stop\n");
+		ht_dbg(sdata,
+		       "unexpected callback to A-MPDU stop for %pM tid %d\n",
+		       sta->sta.addr, tid);
 		goto unlock_sta;
 	}
 
@@ -861,13 +869,15 @@ void ieee80211_process_addba_resp(struct ieee80211_local *local,
 		goto out;
 
 	if (mgmt->u.action.u.addba_resp.dialog_token != tid_tx->dialog_token) {
-		ht_dbg(sta->sdata, "wrong addBA response token, tid %d\n", tid);
+		ht_dbg(sta->sdata, "wrong addBA response token, %pM tid %d\n",
+		       sta->sta.addr, tid);
 		goto out;
 	}
 
 	del_timer_sync(&tid_tx->addba_resp_timer);
 
-	ht_dbg(sta->sdata, "switched off addBA timer for tid %d\n", tid);
+	ht_dbg(sta->sdata, "switched off addBA timer for %pM tid %d\n",
+	       sta->sta.addr, tid);
 
 	/*
 	 * addba_resp_timer may have fired before we got here, and
@@ -877,8 +887,8 @@ void ieee80211_process_addba_resp(struct ieee80211_local *local,
 	if (test_bit(HT_AGG_STATE_WANT_STOP, &tid_tx->state) ||
 	    test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state)) {
 		ht_dbg(sta->sdata,
-		       "got addBA resp for tid %d but we already gave up\n",
-		       tid);
+		       "got addBA resp for %pM tid %d but we already gave up\n",
+		       sta->sta.addr, tid);
 		goto out;
 	}
 

From a65240c1013222dbf41166c8b2c5ed2720c807c3 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Mon, 14 Jan 2013 15:14:34 +0100
Subject: [PATCH 04/15] mac80211: allow drivers to access IPv6 information

To be able to implement NS response offloading (in
regular operation or while in WoWLAN) drivers need
to know the IPv6 addresses assigned to interfaces.
Implement an IPv6 notifier in mac80211 to call the
driver when addresses change.

Unlike for IPv4, implement it as a callback rather
than as a list in the BSS configuration, that is
more flexible.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 include/net/mac80211.h     |  9 +++++++
 net/mac80211/driver-ops.h  | 12 ++++++++++
 net/mac80211/ieee80211_i.h |  1 +
 net/mac80211/main.c        | 48 ++++++++++++++++++++++++++++++++++++++
 net/mac80211/trace.h       |  8 +++++++
 5 files changed, 78 insertions(+)

diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 679ad4bb222b..ece5733d113d 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -2497,6 +2497,9 @@ enum ieee80211_rate_control_changed {
  *	driver's resume function returned 1, as this is just like an "inline"
  *	hardware restart. This callback may sleep.
  *
+ * @ipv6_addr_change: IPv6 address assignment on the given interface changed.
+ *	Currently, this is only called for managed or P2P client interfaces.
+ *	This callback is optional; it must not sleep.
  */
 struct ieee80211_ops {
 	void (*tx)(struct ieee80211_hw *hw,
@@ -2672,6 +2675,12 @@ struct ieee80211_ops {
 				     struct ieee80211_chanctx_conf *ctx);
 
 	void (*restart_complete)(struct ieee80211_hw *hw);
+
+#if IS_ENABLED(CONFIG_IPV6)
+	void (*ipv6_addr_change)(struct ieee80211_hw *hw,
+				 struct ieee80211_vif *vif,
+				 struct inet6_dev *idev);
+#endif
 };
 
 /**
diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h
index e6033b06caba..d51afbd614d3 100644
--- a/net/mac80211/driver-ops.h
+++ b/net/mac80211/driver-ops.h
@@ -1036,4 +1036,16 @@ drv_set_default_unicast_key(struct ieee80211_local *local,
 	trace_drv_return_void(local);
 }
 
+#if IS_ENABLED(CONFIG_IPV6)
+static inline void drv_ipv6_addr_change(struct ieee80211_local *local,
+					struct ieee80211_sub_if_data *sdata,
+					struct inet6_dev *idev)
+{
+	trace_drv_ipv6_addr_change(local, sdata);
+	if (local->ops->ipv6_addr_change)
+		local->ops->ipv6_addr_change(&local->hw, &sdata->vif, idev);
+	trace_drv_return_void(local);
+}
+#endif
+
 #endif /* __MAC80211_DRIVER_OPS */
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index b1fed5491ed6..aec1b332aeb7 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -1127,6 +1127,7 @@ struct ieee80211_local {
 	struct timer_list dynamic_ps_timer;
 	struct notifier_block network_latency_notifier;
 	struct notifier_block ifa_notifier;
+	struct notifier_block ifa6_notifier;
 
 	/*
 	 * The dynamic ps timeout configured from user space via WEXT -
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index baf9720c1876..2bdd454e8bcf 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -23,6 +23,7 @@
 #include <linux/inetdevice.h>
 #include <net/net_namespace.h>
 #include <net/cfg80211.h>
+#include <net/addrconf.h>
 
 #include "ieee80211_i.h"
 #include "driver-ops.h"
@@ -369,6 +370,37 @@ static int ieee80211_ifa_changed(struct notifier_block *nb,
 }
 #endif
 
+#if IS_ENABLED(CONFIG_IPV6)
+static int ieee80211_ifa6_changed(struct notifier_block *nb,
+				  unsigned long data, void *arg)
+{
+	struct inet6_ifaddr *ifa = (struct inet6_ifaddr *)arg;
+	struct inet6_dev *idev = ifa->idev;
+	struct net_device *ndev = ifa->idev->dev;
+	struct ieee80211_local *local =
+		container_of(nb, struct ieee80211_local, ifa6_notifier);
+	struct wireless_dev *wdev = ndev->ieee80211_ptr;
+	struct ieee80211_sub_if_data *sdata;
+
+	/* Make sure it's our interface that got changed */
+	if (!wdev || wdev->wiphy != local->hw.wiphy)
+		return NOTIFY_DONE;
+
+	sdata = IEEE80211_DEV_TO_SUB_IF(ndev);
+
+	/*
+	 * For now only support station mode. This is mostly because
+	 * doing AP would have to handle AP_VLAN in some way ...
+	 */
+	if (sdata->vif.type != NL80211_IFTYPE_STATION)
+		return NOTIFY_DONE;
+
+	drv_ipv6_addr_change(local, sdata, idev);
+
+	return NOTIFY_DONE;
+}
+#endif
+
 static int ieee80211_napi_poll(struct napi_struct *napi, int budget)
 {
 	struct ieee80211_local *local =
@@ -977,12 +1009,25 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
 		goto fail_ifa;
 #endif
 
+#if IS_ENABLED(CONFIG_IPV6)
+	local->ifa6_notifier.notifier_call = ieee80211_ifa6_changed;
+	result = register_inet6addr_notifier(&local->ifa6_notifier);
+	if (result)
+		goto fail_ifa6;
+#endif
+
 	netif_napi_add(&local->napi_dev, &local->napi, ieee80211_napi_poll,
 			local->hw.napi_weight);
 
 	return 0;
 
+#if IS_ENABLED(CONFIG_IPV6)
+ fail_ifa6:
 #ifdef CONFIG_INET
+	unregister_inetaddr_notifier(&local->ifa_notifier);
+#endif
+#endif
+#if defined(CONFIG_INET) || defined(CONFIG_IPV6)
  fail_ifa:
 	pm_qos_remove_notifier(PM_QOS_NETWORK_LATENCY,
 			       &local->network_latency_notifier);
@@ -1018,6 +1063,9 @@ void ieee80211_unregister_hw(struct ieee80211_hw *hw)
 #ifdef CONFIG_INET
 	unregister_inetaddr_notifier(&local->ifa_notifier);
 #endif
+#if IS_ENABLED(CONFIG_IPV6)
+	unregister_inet6addr_notifier(&local->ifa6_notifier);
+#endif
 
 	rtnl_lock();
 
diff --git a/net/mac80211/trace.h b/net/mac80211/trace.h
index e9f95913c6f0..2a2c2e20307d 100644
--- a/net/mac80211/trace.h
+++ b/net/mac80211/trace.h
@@ -1437,6 +1437,14 @@ DEFINE_EVENT(local_only_evt, drv_restart_complete,
 	TP_ARGS(local)
 );
 
+#if IS_ENABLED(CONFIG_IPV6)
+DEFINE_EVENT(local_sdata_evt, drv_ipv6_addr_change,
+	TP_PROTO(struct ieee80211_local *local,
+		 struct ieee80211_sub_if_data *sdata),
+	TP_ARGS(local, sdata)
+);
+#endif
+
 /*
  * Tracing for API calls that drivers call.
  */

From 887da9176e011a044b12ec0deff62df5faadd67c Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Sun, 20 Jan 2013 17:32:41 +0200
Subject: [PATCH 05/15] mac80211: provide the vif in rssi_callback

Since drivers can support several BSS / P2P Client
interfaces, the rssi callback needs to inform the driver
about the interface teh rssi event relates to.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/iwlwifi/dvm/mac80211.c | 1 +
 include/net/mac80211.h                      | 1 +
 net/mac80211/driver-ops.h                   | 5 +++--
 net/mac80211/mlme.c                         | 4 ++--
 net/mac80211/trace.h                        | 9 ++++++---
 5 files changed, 13 insertions(+), 7 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/dvm/mac80211.c b/drivers/net/wireless/iwlwifi/dvm/mac80211.c
index 02fdcea76b21..f16b81d625ad 100644
--- a/drivers/net/wireless/iwlwifi/dvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/dvm/mac80211.c
@@ -1156,6 +1156,7 @@ static int iwlagn_mac_cancel_remain_on_channel(struct ieee80211_hw *hw)
 }
 
 static void iwlagn_mac_rssi_callback(struct ieee80211_hw *hw,
+				     struct ieee80211_vif *vif,
 				     enum ieee80211_rssi_event rssi_event)
 {
 	struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index ece5733d113d..5c98d654fc75 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -2633,6 +2633,7 @@ struct ieee80211_ops {
 	int (*set_bitrate_mask)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 				const struct cfg80211_bitrate_mask *mask);
 	void (*rssi_callback)(struct ieee80211_hw *hw,
+			      struct ieee80211_vif *vif,
 			      enum ieee80211_rssi_event rssi_event);
 
 	void (*allow_buffered_frames)(struct ieee80211_hw *hw,
diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h
index d51afbd614d3..e75f5b9eb24f 100644
--- a/net/mac80211/driver-ops.h
+++ b/net/mac80211/driver-ops.h
@@ -845,11 +845,12 @@ static inline void drv_set_rekey_data(struct ieee80211_local *local,
 }
 
 static inline void drv_rssi_callback(struct ieee80211_local *local,
+				     struct ieee80211_sub_if_data *sdata,
 				     const enum ieee80211_rssi_event event)
 {
-	trace_drv_rssi_callback(local, event);
+	trace_drv_rssi_callback(local, sdata, event);
 	if (local->ops->rssi_callback)
-		local->ops->rssi_callback(&local->hw, event);
+		local->ops->rssi_callback(&local->hw, &sdata->vif, event);
 	trace_drv_return_void(local);
 }
 
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 2d9ef20cd38d..344ef7d47c1a 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -2604,12 +2604,12 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
 		if (sig > ifmgd->rssi_max_thold &&
 		    (last_sig <= ifmgd->rssi_min_thold || last_sig == 0)) {
 			ifmgd->last_ave_beacon_signal = sig;
-			drv_rssi_callback(local, RSSI_EVENT_HIGH);
+			drv_rssi_callback(local, sdata, RSSI_EVENT_HIGH);
 		} else if (sig < ifmgd->rssi_min_thold &&
 			   (last_sig >= ifmgd->rssi_max_thold ||
 			   last_sig == 0)) {
 			ifmgd->last_ave_beacon_signal = sig;
-			drv_rssi_callback(local, RSSI_EVENT_LOW);
+			drv_rssi_callback(local, sdata, RSSI_EVENT_LOW);
 		}
 	}
 
diff --git a/net/mac80211/trace.h b/net/mac80211/trace.h
index 2a2c2e20307d..6ca53d64cb28 100644
--- a/net/mac80211/trace.h
+++ b/net/mac80211/trace.h
@@ -1189,23 +1189,26 @@ TRACE_EVENT(drv_set_rekey_data,
 
 TRACE_EVENT(drv_rssi_callback,
 	TP_PROTO(struct ieee80211_local *local,
+		 struct ieee80211_sub_if_data *sdata,
 		 enum ieee80211_rssi_event rssi_event),
 
-	TP_ARGS(local, rssi_event),
+	TP_ARGS(local, sdata, rssi_event),
 
 	TP_STRUCT__entry(
 		LOCAL_ENTRY
+		VIF_ENTRY
 		__field(u32, rssi_event)
 	),
 
 	TP_fast_assign(
 		LOCAL_ASSIGN;
+		VIF_ASSIGN;
 		__entry->rssi_event = rssi_event;
 	),
 
 	TP_printk(
-		LOCAL_PR_FMT " rssi_event:%d",
-		LOCAL_PR_ARG, __entry->rssi_event
+		LOCAL_PR_FMT VIF_PR_FMT " rssi_event:%d",
+		LOCAL_PR_ARG, VIF_PR_ARG, __entry->rssi_event
 	)
 );
 

From 8147dc7f54f0f2e13c3b65fd9628994ad576610b Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Fri, 18 Jan 2013 23:47:05 +0100
Subject: [PATCH 06/15] mac80211: fix aggregation state with current drivers

For drivers that don't actually flush their queues when
aggregation stop with the IEEE80211_AMPDU_TX_STOP_FLUSH
or IEEE80211_AMPDU_TX_STOP_FLUSH_CONT reasons is done,
like iwlwifi or iwlegacy, mac80211 can then transmit on
a TID that the driver still considers busy. This happens
in the following way:

 - IEEE80211_AMPDU_TX_STOP_FLUSH requested
 - driver marks TID as emptying
 - mac80211 removes tid_tx data, this can copy packets
   to the TX pending queues and also let new packets
   through to the driver
 - driver gets unexpected TX as it wasn't completely
   converted to the new API

In iwlwifi, this lead to the following warning:

WARNING: at drivers/net/wireless/iwlwifi/dvm/tx.c:442 iwlagn_tx_skb+0xc47/0xce0
Tx while agg.state = 4
Modules linked in: [...]
Pid: 0, comm: kworker/0:0 Tainted: G        W   3.1.0 #1
Call Trace:
 [<c1046e42>] warn_slowpath_common+0x72/0xa0
 [<c1046f13>] warn_slowpath_fmt+0x33/0x40
 [<fddffa17>] iwlagn_tx_skb+0xc47/0xce0 [iwldvm]
 [<fddfcaa3>] iwlagn_mac_tx+0x23/0x40 [iwldvm]
 [<fd8c98b6>] __ieee80211_tx+0xf6/0x3c0 [mac80211]
 [<fd8cbe00>] ieee80211_tx+0xd0/0x100 [mac80211]
 [<fd8cc176>] ieee80211_xmit+0x96/0xe0 [mac80211]
 [<fd8cc578>] ieee80211_subif_start_xmit+0x348/0xc80 [mac80211]
 [<c1445207>] dev_hard_start_xmit+0x337/0x6d0
 [<c145eee9>] sch_direct_xmit+0xa9/0x210
 [<c14462c0>] dev_queue_xmit+0x1b0/0x8e0

Fortunately, solving this problem is easy as the station
is being destroyed, so such transmit packets can only
happen due to races. Instead of trying to close the race
just let the race not reach the drivers by making two
changes:
 1) remove the explicit aggregation session teardown in
    the managed mode code, the same thing will be done
    when the station is removed, in __sta_info_destroy.
 2) When aggregation stop with AGG_STOP_DESTROY_STA is
    requested, leave the tid_tx data around as stopped.
    It will be cleared and freed in cleanup_single_sta
    later, but until then any racy packets will be put
    onto the tid_tx pending queue instead of transmitted
    which is fine since the station is being removed.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/mac80211/agg-tx.c | 17 ++++++++++-------
 net/mac80211/mlme.c   |  9 ---------
 2 files changed, 10 insertions(+), 16 deletions(-)

diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c
index e90911819ed4..13b7683de5a4 100644
--- a/net/mac80211/agg-tx.c
+++ b/net/mac80211/agg-tx.c
@@ -296,7 +296,7 @@ int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid,
 				       IEEE80211_AMPDU_TX_STOP_FLUSH_CONT,
 				       &sta->sta, tid, NULL, 0);
 		WARN_ON_ONCE(ret);
-		goto remove_tid_tx;
+		return 0;
 	}
 
 	if (test_bit(HT_AGG_STATE_WANT_START, &tid_tx->state)) {
@@ -354,12 +354,15 @@ int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid,
 		 */
 	}
 
-	if (reason == AGG_STOP_DESTROY_STA) {
- remove_tid_tx:
-		spin_lock_bh(&sta->lock);
-		ieee80211_remove_tid_tx(sta, tid);
-		spin_unlock_bh(&sta->lock);
-	}
+	/*
+	 * In the case of AGG_STOP_DESTROY_STA, the driver won't
+	 * necessarily call ieee80211_stop_tx_ba_cb(), so this may
+	 * seem like we can leave the tid_tx data pending forever.
+	 * This is true, in a way, but "forever" is only until the
+	 * station struct is actually destroyed. In the meantime,
+	 * leaving it around ensures that we don't transmit packets
+	 * to the driver on this TID which might confuse it.
+	 */
 
 	return 0;
 }
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 344ef7d47c1a..62e8f890fed6 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -1487,7 +1487,6 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata,
 {
 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
 	struct ieee80211_local *local = sdata->local;
-	struct sta_info *sta;
 	u32 changed = 0;
 
 	ASSERT_MGD_MTX(ifmgd);
@@ -1519,14 +1518,6 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata,
 	netif_tx_stop_all_queues(sdata->dev);
 	netif_carrier_off(sdata->dev);
 
-	mutex_lock(&local->sta_mtx);
-	sta = sta_info_get(sdata, ifmgd->bssid);
-	if (sta) {
-		set_sta_flag(sta, WLAN_STA_BLOCK_BA);
-		ieee80211_sta_tear_down_BA_sessions(sta, AGG_STOP_DESTROY_STA);
-	}
-	mutex_unlock(&local->sta_mtx);
-
 	/*
 	 * if we want to get out of ps before disassoc (why?) we have
 	 * to do it before sending disassoc, as otherwise the null-packet

From d437c86baacf265a640dfc462c75941d02c0e153 Mon Sep 17 00:00:00 2001
From: Bing Zhao <bzhao@marvell.com>
Date: Wed, 23 Jan 2013 20:33:58 -0800
Subject: [PATCH 07/15] ieee80211: define AKM suite selectors type 5, 6 and 7

Reference: IEEE 802.11-2012 8.4.2.27.3 "AKM suites"

Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 include/linux/ieee80211.h | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index ccf9ee1dca8c..11c8bc87fdcb 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -1898,7 +1898,10 @@ enum ieee80211_sa_query_action {
 /* AKM suite selectors */
 #define WLAN_AKM_SUITE_8021X		0x000FAC01
 #define WLAN_AKM_SUITE_PSK		0x000FAC02
-#define WLAN_AKM_SUITE_SAE			0x000FAC08
+#define WLAN_AKM_SUITE_8021X_SHA256	0x000FAC05
+#define WLAN_AKM_SUITE_PSK_SHA256	0x000FAC06
+#define WLAN_AKM_SUITE_TDLS		0x000FAC07
+#define WLAN_AKM_SUITE_SAE		0x000FAC08
 #define WLAN_AKM_SUITE_FT_OVER_SAE	0x000FAC09
 
 #define WLAN_MAX_KEY_LEN		32

From 296fcba3ba1b8888aa8f5211de1e25a78b47aeee Mon Sep 17 00:00:00 2001
From: Thomas Pedersen <thomas@cozybit.com>
Date: Wed, 23 Jan 2013 12:18:12 -0800
Subject: [PATCH 08/15] mac80211: clean up mesh sta allocation warning

This refactoring fixes a "scheduling while atomic" warning
when allocating a mesh station entry while holding the RCU
read lock. Fix this by creating a new function
mesh_sta_info_get(), which correctly handles the locking
and returns under RCU.

Also move some unnecessarily #ifdefed mesh station init
code from sta_info_alloc() to __mesh_sta_info_alloc().

Signed-off-by: Thomas Pedersen <thomas@cozybit.com>
[change code flow to make sparse happy]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/mac80211/mesh_plink.c | 158 +++++++++++++++++++++++---------------
 net/mac80211/sta_info.c   |   5 --
 2 files changed, 95 insertions(+), 68 deletions(-)

diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c
index 9e0416696a83..ef92d2705851 100644
--- a/net/mac80211/mesh_plink.c
+++ b/net/mac80211/mesh_plink.c
@@ -55,30 +55,6 @@ static inline void mesh_plink_fsm_restart(struct sta_info *sta)
 	sta->plink_retries = 0;
 }
 
-/*
- * Allocate mesh sta entry and insert into station table
- */
-static struct sta_info *mesh_plink_alloc(struct ieee80211_sub_if_data *sdata,
-					 u8 *hw_addr)
-{
-	struct sta_info *sta;
-
-	if (sdata->local->num_sta >= MESH_MAX_PLINKS)
-		return NULL;
-
-	sta = sta_info_alloc(sdata, hw_addr, GFP_KERNEL);
-	if (!sta)
-		return NULL;
-
-	sta_info_pre_move_state(sta, IEEE80211_STA_AUTH);
-	sta_info_pre_move_state(sta, IEEE80211_STA_ASSOC);
-	sta_info_pre_move_state(sta, IEEE80211_STA_AUTHORIZED);
-
-	set_sta_flag(sta, WLAN_STA_WME);
-
-	return sta;
-}
-
 /**
  * mesh_set_ht_prot_mode - set correct HT protection mode
  *
@@ -309,52 +285,24 @@ free:
 	return err;
 }
 
-/**
- * mesh_peer_init - initialize new mesh peer and return resulting sta_info
- *
- * @sdata: local meshif
- * @addr: peer's address
- * @elems: IEs from beacon or mesh peering frame
- *
- * call under RCU
- */
-static struct sta_info *mesh_peer_init(struct ieee80211_sub_if_data *sdata,
-				       u8 *addr,
-				       struct ieee802_11_elems *elems)
+static void mesh_sta_info_init(struct ieee80211_sub_if_data *sdata,
+			       struct sta_info *sta,
+			       struct ieee802_11_elems *elems, bool insert)
 {
 	struct ieee80211_local *local = sdata->local;
 	enum ieee80211_band band = ieee80211_get_sdata_band(sdata);
 	struct ieee80211_supported_band *sband;
 	u32 rates, basic_rates = 0;
-	struct sta_info *sta;
-	bool insert = false;
 
 	sband = local->hw.wiphy->bands[band];
 	rates = ieee80211_sta_get_rates(local, elems, band, &basic_rates);
 
-	sta = sta_info_get(sdata, addr);
-	if (!sta) {
-		/* Userspace handles peer allocation when security is enabled */
-		if (sdata->u.mesh.security & IEEE80211_MESH_SEC_AUTHED) {
-			cfg80211_notify_new_peer_candidate(sdata->dev, addr,
-							   elems->ie_start,
-							   elems->total_len,
-							   GFP_ATOMIC);
-			return NULL;
-		}
-
-		sta = mesh_plink_alloc(sdata, addr);
-		if (!sta)
-			return NULL;
-		insert = true;
-	}
-
 	spin_lock_bh(&sta->lock);
 	sta->last_rx = jiffies;
-	if (sta->plink_state == NL80211_PLINK_ESTAB) {
-		spin_unlock_bh(&sta->lock);
-		return sta;
-	}
+
+	/* rates and capabilities don't change during peering */
+	if (sta->plink_state == NL80211_PLINK_ESTAB)
+		goto out;
 
 	sta->sta.supp_rates[band] = rates;
 	if (elems->ht_cap_elem &&
@@ -379,22 +327,104 @@ static struct sta_info *mesh_peer_init(struct ieee80211_sub_if_data *sdata,
 
 	if (insert)
 		rate_control_rate_init(sta);
+out:
 	spin_unlock_bh(&sta->lock);
+}
 
-	if (insert && sta_info_insert(sta))
+static struct sta_info *
+__mesh_sta_info_alloc(struct ieee80211_sub_if_data *sdata, u8 *hw_addr)
+{
+	struct sta_info *sta;
+
+	if (sdata->local->num_sta >= MESH_MAX_PLINKS)
 		return NULL;
 
+	sta = sta_info_alloc(sdata, hw_addr, GFP_KERNEL);
+	if (!sta)
+		return NULL;
+
+	sta->plink_state = NL80211_PLINK_LISTEN;
+	init_timer(&sta->plink_timer);
+
+	sta_info_pre_move_state(sta, IEEE80211_STA_AUTH);
+	sta_info_pre_move_state(sta, IEEE80211_STA_ASSOC);
+	sta_info_pre_move_state(sta, IEEE80211_STA_AUTHORIZED);
+
+	set_sta_flag(sta, WLAN_STA_WME);
+
 	return sta;
 }
 
+static struct sta_info *
+mesh_sta_info_alloc(struct ieee80211_sub_if_data *sdata, u8 *addr,
+		    struct ieee802_11_elems *elems)
+{
+	struct sta_info *sta = NULL;
+
+	/* Userspace handles peer allocation when security is enabled */
+	if (sdata->u.mesh.security & IEEE80211_MESH_SEC_AUTHED)
+		cfg80211_notify_new_peer_candidate(sdata->dev, addr,
+						   elems->ie_start,
+						   elems->total_len,
+						   GFP_KERNEL);
+	else
+		sta = __mesh_sta_info_alloc(sdata, addr);
+
+	return sta;
+}
+
+/*
+ * mesh_sta_info_get - return mesh sta info entry for @addr.
+ *
+ * @sdata: local meshif
+ * @addr: peer's address
+ * @elems: IEs from beacon or mesh peering frame.
+ *
+ * Return existing or newly allocated sta_info under RCU read lock.
+ * (re)initialize with given IEs.
+ */
+static struct sta_info *
+mesh_sta_info_get(struct ieee80211_sub_if_data *sdata,
+		  u8 *addr, struct ieee802_11_elems *elems) __acquires(RCU)
+{
+	struct sta_info *sta = NULL;
+
+	rcu_read_lock();
+	sta = sta_info_get(sdata, addr);
+	if (sta) {
+		mesh_sta_info_init(sdata, sta, elems, false);
+	} else {
+		rcu_read_unlock();
+		/* can't run atomic */
+		sta = mesh_sta_info_alloc(sdata, addr, elems);
+		if (!sta) {
+			rcu_read_lock();
+			return NULL;
+		}
+
+		if (sta_info_insert_rcu(sta))
+			return NULL;
+	}
+
+	return sta;
+}
+
+/*
+ * mesh_neighbour_update - update or initialize new mesh neighbor.
+ *
+ * @sdata: local meshif
+ * @addr: peer's address
+ * @elems: IEs from beacon or mesh peering frame
+ *
+ * Initiates peering if appropriate.
+ */
 void mesh_neighbour_update(struct ieee80211_sub_if_data *sdata,
 			   u8 *hw_addr,
 			   struct ieee802_11_elems *elems)
 {
 	struct sta_info *sta;
 
-	rcu_read_lock();
-	sta = mesh_peer_init(sdata, hw_addr, elems);
+	sta = mesh_sta_info_get(sdata, hw_addr, elems);
 	if (!sta)
 		goto out;
 
@@ -632,6 +662,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 	    (ftype == WLAN_SP_MESH_PEERING_CLOSE && ie_len == 8))
 		memcpy(&llid, PLINK_GET_PLID(elems.peering), 2);
 
+	/* WARNING: Only for sta pointer, is dropped & re-acquired */
 	rcu_read_lock();
 
 	sta = sta_info_get(sdata, mgmt->sa);
@@ -735,8 +766,9 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 	}
 
 	if (event == OPN_ACPT) {
+		rcu_read_unlock();
 		/* allocate sta entry if necessary and update info */
-		sta = mesh_peer_init(sdata, mgmt->sa, &elems);
+		sta = mesh_sta_info_get(sdata, mgmt->sa, &elems);
 		if (!sta) {
 			mpl_dbg(sdata, "Mesh plink: failed to init peer!\n");
 			rcu_read_unlock();
diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c
index 9d864ed5f3da..227233c3ff7f 100644
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -380,11 +380,6 @@ struct sta_info *sta_info_alloc(struct ieee80211_sub_if_data *sdata,
 
 	sta_dbg(sdata, "Allocated STA %pM\n", sta->sta.addr);
 
-#ifdef CONFIG_MAC80211_MESH
-	sta->plink_state = NL80211_PLINK_LISTEN;
-	init_timer(&sta->plink_timer);
-#endif
-
 	return sta;
 }
 

From f68d776a04bfcebc426f605c4440ffe38c583a4b Mon Sep 17 00:00:00 2001
From: Thomas Pedersen <thomas@cozybit.com>
Date: Wed, 23 Jan 2013 12:18:13 -0800
Subject: [PATCH 09/15] mac80211: support mesh rate updates

An existing mesh station entry may change its rate
capabilities, so call rate_control_rate_update() to notify
the rate control.

Signed-off-by: Thomas Pedersen <thomas@cozybit.com>
[fix compilation]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/mac80211/driver-ops.h | 3 ++-
 net/mac80211/mesh_plink.c | 8 +++++++-
 2 files changed, 9 insertions(+), 2 deletions(-)

diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h
index e75f5b9eb24f..434b3c4f31b5 100644
--- a/net/mac80211/driver-ops.h
+++ b/net/mac80211/driver-ops.h
@@ -569,7 +569,8 @@ static inline void drv_sta_rc_update(struct ieee80211_local *local,
 	check_sdata_in_driver(sdata);
 
 	WARN_ON(changed & IEEE80211_RC_SUPP_RATES_CHANGED &&
-		sdata->vif.type != NL80211_IFTYPE_ADHOC);
+		(sdata->vif.type != NL80211_IFTYPE_ADHOC &&
+		 sdata->vif.type != NL80211_IFTYPE_MESH_POINT));
 
 	trace_drv_sta_rc_update(local, sdata, sta, changed);
 	if (local->ops->sta_rc_update)
diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c
index ef92d2705851..4e1d406fd9b1 100644
--- a/net/mac80211/mesh_plink.c
+++ b/net/mac80211/mesh_plink.c
@@ -292,7 +292,7 @@ static void mesh_sta_info_init(struct ieee80211_sub_if_data *sdata,
 	struct ieee80211_local *local = sdata->local;
 	enum ieee80211_band band = ieee80211_get_sdata_band(sdata);
 	struct ieee80211_supported_band *sband;
-	u32 rates, basic_rates = 0;
+	u32 rates, basic_rates = 0, changed = 0;
 
 	sband = local->hw.wiphy->bands[band];
 	rates = ieee80211_sta_get_rates(local, elems, band, &basic_rates);
@@ -304,6 +304,8 @@ static void mesh_sta_info_init(struct ieee80211_sub_if_data *sdata,
 	if (sta->plink_state == NL80211_PLINK_ESTAB)
 		goto out;
 
+	if (sta->sta.supp_rates[band] != rates)
+		changed |= IEEE80211_RC_SUPP_RATES_CHANGED;
 	sta->sta.supp_rates[band] = rates;
 	if (elems->ht_cap_elem &&
 	    sdata->vif.bss_conf.chandef.width != NL80211_CHAN_WIDTH_20_NOHT)
@@ -322,11 +324,15 @@ static void mesh_sta_info_init(struct ieee80211_sub_if_data *sdata,
 					    ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
 		ieee80211_ht_oper_to_chandef(sdata->vif.bss_conf.chandef.chan,
 					     elems->ht_operation, &chandef);
+		if (sta->ch_width != chandef.width)
+			changed |= IEEE80211_RC_BW_CHANGED;
 		sta->ch_width = chandef.width;
 	}
 
 	if (insert)
 		rate_control_rate_init(sta);
+	else
+		rate_control_rate_update(local, sband, sta, changed);
 out:
 	spin_unlock_bh(&sta->lock);
 }

From 683d41ae6755e6ae297ec09603c229795ab9566e Mon Sep 17 00:00:00 2001
From: Simon Wunderlich <simon.wunderlich@s2003.tu-chemnitz.de>
Date: Wed, 23 Jan 2013 15:15:57 +0100
Subject: [PATCH 10/15] cfg80211: fix channel check in
 cfg80211_can_use_iftype_chan

In commit "cfg80211: check radar interface combinations" a regression
was introduced which might lead to NULL dereference if the argument
chan = NULL, which might happen in IBSS/wext case (and probably
others).

Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/wireless/util.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/wireless/util.c b/net/wireless/util.c
index 1c2795d52db0..d7873c7ae0ec 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -1212,7 +1212,8 @@ int cfg80211_can_use_iftype_chan(struct cfg80211_registered_device *rdev,
 	case NL80211_IFTYPE_MESH_POINT:
 	case NL80211_IFTYPE_P2P_GO:
 	case NL80211_IFTYPE_WDS:
-		radar_required = !!(chan->flags & IEEE80211_CHAN_RADAR);
+		radar_required = !!(chan &&
+				    (chan->flags & IEEE80211_CHAN_RADAR));
 		break;
 	case NL80211_IFTYPE_P2P_CLIENT:
 	case NL80211_IFTYPE_STATION:

From 782d2673655c05a1c0335fe0ee4cb62c23bcc231 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Fri, 18 Jan 2013 21:21:31 +0100
Subject: [PATCH 11/15] mac80211: remove redundant check

There's no need to have two checks for "associated"
in ieee80211_sta_restart(), make the first one locked
to not race (unlikely at this point during resume)
and remove the second check.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/mac80211/mlme.c | 21 ++++++++++-----------
 1 file changed, 10 insertions(+), 11 deletions(-)

diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 62e8f890fed6..5913fb924b12 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -3156,23 +3156,22 @@ void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata)
 {
 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
 
-	if (!ifmgd->associated)
+	mutex_lock(&ifmgd->mtx);
+	if (!ifmgd->associated) {
+		mutex_unlock(&ifmgd->mtx);
 		return;
+	}
 
 	if (sdata->flags & IEEE80211_SDATA_DISCONNECT_RESUME) {
 		sdata->flags &= ~IEEE80211_SDATA_DISCONNECT_RESUME;
-		mutex_lock(&ifmgd->mtx);
-		if (ifmgd->associated) {
-			mlme_dbg(sdata,
-				 "driver requested disconnect after resume\n");
-			ieee80211_sta_connection_lost(sdata,
-				ifmgd->associated->bssid,
-				WLAN_REASON_UNSPECIFIED);
-			mutex_unlock(&ifmgd->mtx);
-			return;
-		}
+		mlme_dbg(sdata, "driver requested disconnect after resume\n");
+		ieee80211_sta_connection_lost(sdata,
+					      ifmgd->associated->bssid,
+					      WLAN_REASON_UNSPECIFIED);
 		mutex_unlock(&ifmgd->mtx);
+		return;
 	}
+	mutex_unlock(&ifmgd->mtx);
 
 	if (test_and_clear_bit(TMR_RUNNING_TIMER, &ifmgd->timers_running))
 		add_timer(&ifmgd->timer);

From fe80123d83d1f9abca426914f768048e601f54db Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Fri, 25 Jan 2013 14:14:33 +0000
Subject: [PATCH 12/15] mac80211: avoid a build warning

gcc cannot prove that the value of sdata->vif.type does not
change between the switch() statement and the second
comparison to NL80211_IFTYPE_AP, causing a harmless
warning.
Slightly reordering the code makes the warning go away
with no functional change.

Without this patch, building ARM at91sam9g45_defconfig with
gcc-4.6 results in:

net/mac80211/tx.c: In function 'ieee80211_subif_start_xmit':
net/mac80211/tx.c:1797:22: warning: 'chanctx_conf' may be used uninitialized in this function [-Wuninitialized]

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: "John W. Linville" <linville@tuxdriver.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/mac80211/tx.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 0d7381679a5c..b4a84146de0c 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -1784,16 +1784,16 @@ netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb,
 			break;
 		/* fall through */
 	case NL80211_IFTYPE_AP:
+		if (sdata->vif.type == NL80211_IFTYPE_AP)
+			chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
+		if (!chanctx_conf)
+			goto fail_rcu;
 		fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS);
 		/* DA BSSID SA */
 		memcpy(hdr.addr1, skb->data, ETH_ALEN);
 		memcpy(hdr.addr2, sdata->vif.addr, ETH_ALEN);
 		memcpy(hdr.addr3, skb->data + ETH_ALEN, ETH_ALEN);
 		hdrlen = 24;
-		if (sdata->vif.type == NL80211_IFTYPE_AP)
-			chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
-		if (!chanctx_conf)
-			goto fail_rcu;
 		band = chanctx_conf->def.chan->band;
 		break;
 	case NL80211_IFTYPE_WDS:

From 6d45a74b1f2e42e41c9931bfb35cdb789d0bb3ea Mon Sep 17 00:00:00 2001
From: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Date: Fri, 18 Jan 2013 11:18:44 +0530
Subject: [PATCH 13/15] cfg80211: Move the definition of struct mac_address up

struct mac_address will be used by ACL related configuration ops.

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 include/net/cfg80211.h | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 970da4420676..183033789e69 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -527,6 +527,10 @@ struct cfg80211_beacon_data {
 	size_t probe_resp_len;
 };
 
+struct mac_address {
+	u8 addr[ETH_ALEN];
+};
+
 /**
  * struct cfg80211_ap_settings - AP configuration
  *
@@ -2181,10 +2185,6 @@ struct ieee80211_iface_combination {
 	u8 radar_detect_widths;
 };
 
-struct mac_address {
-	u8 addr[ETH_ALEN];
-};
-
 struct ieee80211_txrx_stypes {
 	u16 tx, rx;
 };

From 77765eaf5cfb6b8dd98ec8b54b411d74ff6095f1 Mon Sep 17 00:00:00 2001
From: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Date: Fri, 18 Jan 2013 11:18:45 +0530
Subject: [PATCH 14/15] cfg80211/nl80211: add API for MAC address ACLs

Add API to enable drivers to implement MAC address based
access control in AP/P2P GO mode. Capable drivers advertise
this capability by setting the maximum number of MAC
addresses in such a list in wiphy->max_acl_mac_addrs.

An initial ACL may be given to the NL80211_CMD_START_AP
command and/or changed later with NL80211_CMD_SET_MAC_ACL.

Black- and whitelists are supported, but not simultaneously.

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
[rewrite commit log, many cleanups]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 include/net/cfg80211.h       |  34 ++++++++++
 include/uapi/linux/nl80211.h |  51 ++++++++++++++-
 net/wireless/core.c          |   5 ++
 net/wireless/nl80211.c       | 116 +++++++++++++++++++++++++++++++++++
 net/wireless/rdev-ops.h      |  12 ++++
 net/wireless/trace.h         |  18 ++++++
 6 files changed, 234 insertions(+), 2 deletions(-)

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 183033789e69..36e076e374d2 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -531,6 +531,22 @@ struct mac_address {
 	u8 addr[ETH_ALEN];
 };
 
+/**
+ * struct cfg80211_acl_data - Access control list data
+ *
+ * @acl_policy: ACL policy to be applied on the station's
+	entry specified by mac_addr
+ * @n_acl_entries: Number of MAC address entries passed
+ * @mac_addrs: List of MAC addresses of stations to be used for ACL
+ */
+struct cfg80211_acl_data {
+	enum nl80211_acl_policy acl_policy;
+	int n_acl_entries;
+
+	/* Keep it last */
+	struct mac_address mac_addrs[];
+};
+
 /**
  * struct cfg80211_ap_settings - AP configuration
  *
@@ -550,6 +566,8 @@ struct mac_address {
  * @inactivity_timeout: time in seconds to determine station's inactivity.
  * @p2p_ctwindow: P2P CT Window
  * @p2p_opp_ps: P2P opportunistic PS
+ * @acl: ACL configuration used by the drivers which has support for
+ *	MAC address based access control
  */
 struct cfg80211_ap_settings {
 	struct cfg80211_chan_def chandef;
@@ -566,6 +584,7 @@ struct cfg80211_ap_settings {
 	int inactivity_timeout;
 	u8 p2p_ctwindow;
 	bool p2p_opp_ps;
+	const struct cfg80211_acl_data *acl;
 };
 
 /**
@@ -1800,6 +1819,13 @@ struct cfg80211_gtk_rekey_data {
  *
  * @start_p2p_device: Start the given P2P device.
  * @stop_p2p_device: Stop the given P2P device.
+ *
+ * @set_mac_acl: Sets MAC address control list in AP and P2P GO mode.
+ *	Parameters include ACL policy, an array of MAC address of stations
+ *	and the number of MAC addresses. If there is already a list in driver
+ *	this new list replaces the existing one. Driver has to clear its ACL
+ *	when number of MAC addresses entries is passed as 0. Drivers which
+ *	advertise the support for MAC based ACL have to implement this callback.
  */
 struct cfg80211_ops {
 	int	(*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow);
@@ -2020,6 +2046,9 @@ struct cfg80211_ops {
 				    struct wireless_dev *wdev);
 	void	(*stop_p2p_device)(struct wiphy *wiphy,
 				   struct wireless_dev *wdev);
+
+	int	(*set_mac_acl)(struct wiphy *wiphy, struct net_device *dev,
+			       const struct cfg80211_acl_data *params);
 };
 
 /*
@@ -2325,6 +2354,9 @@ struct wiphy_wowlan_support {
  * @ap_sme_capa: AP SME capabilities, flags from &enum nl80211_ap_sme_features.
  * @ht_capa_mod_mask:  Specify what ht_cap values can be over-ridden.
  *	If null, then none can be over-ridden.
+ *
+ * @max_acl_mac_addrs: Maximum number of MAC addresses that the device
+ *	supports for ACL.
  */
 struct wiphy {
 	/* assign these fields before you register the wiphy */
@@ -2346,6 +2378,8 @@ struct wiphy {
 	/* Supported interface modes, OR together BIT(NL80211_IFTYPE_...) */
 	u16 interface_modes;
 
+	u16 max_acl_mac_addrs;
+
 	u32 flags, features;
 
 	u32 ap_sme_capa;
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index e6eeb4ba5dc5..5b7dbc1ea966 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -170,7 +170,8 @@
  *	%NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE,
  *	%NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS,
  *	%NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY,
- *	%NL80211_ATTR_AUTH_TYPE and %NL80211_ATTR_INACTIVITY_TIMEOUT.
+ *	%NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_INACTIVITY_TIMEOUT,
+ *	%NL80211_ATTR_ACL_POLICY and %NL80211_ATTR_MAC_ADDRS.
  *	The channel to use can be set on the interface or be given using the
  *	%NL80211_ATTR_WIPHY_FREQ and the attributes determining channel width.
  * @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP
@@ -586,6 +587,16 @@
  * @NL80211_CMD_SET_MCAST_RATE: Change the rate used to send multicast frames
  *	for IBSS or MESH vif.
  *
+ * @NL80211_CMD_SET_MAC_ACL: sets ACL for MAC address based access control.
+ *	This is to be used with the drivers advertising the support of MAC
+ *	address based access control. List of MAC addresses is passed in
+ *	%NL80211_ATTR_MAC_ADDRS and ACL policy is passed in
+ *	%NL80211_ATTR_ACL_POLICY. Driver will enable ACL with this list, if it
+ *	is not already done. The new list will replace any existing list. Driver
+ *	will clear its ACL when the list of MAC addresses passed is empty. This
+ *	command is used in AP/P2P GO mode. Driver has to make sure to clear its
+ *	ACL list during %NL80211_CMD_STOP_AP.
+ *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
@@ -736,6 +747,8 @@ enum nl80211_commands {
 
 	NL80211_CMD_SET_MCAST_RATE,
 
+	NL80211_CMD_SET_MAC_ACL,
+
 	/* add new commands above here */
 
 	/* used to define NL80211_CMD_MAX below */
@@ -1313,6 +1326,16 @@ enum nl80211_commands {
  * @NL80211_ATTR_LOCAL_MESH_POWER_MODE: local mesh STA link-specific power mode
  *	defined in &enum nl80211_mesh_power_mode.
  *
+ * @NL80211_ATTR_ACL_POLICY: ACL policy, see &enum nl80211_acl_policy,
+ *	carried in a u32 attribute
+ *
+ * @NL80211_ATTR_MAC_ADDRS: Array of nested MAC addresses, used for
+ *	MAC ACL.
+ *
+ * @NL80211_ATTR_MAC_ACL_MAX: u32 attribute to advertise the maximum
+ *	number of MAC addresses that a device can support for MAC
+ *	ACL.
+ *
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
  */
@@ -1585,6 +1608,12 @@ enum nl80211_attrs {
 
 	NL80211_ATTR_LOCAL_MESH_POWER_MODE,
 
+	NL80211_ATTR_ACL_POLICY,
+
+	NL80211_ATTR_MAC_ADDRS,
+
+	NL80211_ATTR_MAC_ACL_MAX,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -3248,7 +3277,7 @@ enum nl80211_probe_resp_offload_support_attr {
  * enum nl80211_connect_failed_reason - connection request failed reasons
  * @NL80211_CONN_FAIL_MAX_CLIENTS: Maximum number of clients that can be
  *	handled by the AP is reached.
- * @NL80211_CONN_FAIL_BLOCKED_CLIENT: Client's MAC is in the AP's blocklist.
+ * @NL80211_CONN_FAIL_BLOCKED_CLIENT: Connection request is rejected due to ACL.
  */
 enum nl80211_connect_failed_reason {
 	NL80211_CONN_FAIL_MAX_CLIENTS,
@@ -3276,4 +3305,22 @@ enum nl80211_scan_flags {
 	NL80211_SCAN_FLAG_AP				= 1<<2,
 };
 
+/**
+ * enum nl80211_acl_policy - access control policy
+ *
+ * Access control policy is applied on a MAC list set by
+ * %NL80211_CMD_START_AP and %NL80211_CMD_SET_MAC_ACL, to
+ * be used with %NL80211_ATTR_ACL_POLICY.
+ *
+ * @NL80211_ACL_POLICY_ACCEPT_UNLESS_LISTED: Deny stations which are
+ *	listed in ACL, i.e. allow all the stations which are not listed
+ *	in ACL to authenticate.
+ * @NL80211_ACL_POLICY_DENY_UNLESS_LISTED: Allow the stations which are listed
+ *	in ACL, i.e. deny all the stations which are not listed in ACL.
+ */
+enum nl80211_acl_policy {
+	NL80211_ACL_POLICY_ACCEPT_UNLESS_LISTED,
+	NL80211_ACL_POLICY_DENY_UNLESS_LISTED,
+};
+
 #endif /* __LINUX_NL80211_H */
diff --git a/net/wireless/core.c b/net/wireless/core.c
index 0e702cdc6043..ce827242f390 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -478,6 +478,11 @@ int wiphy_register(struct wiphy *wiphy)
 			   ETH_ALEN)))
 		return -EINVAL;
 
+	if (WARN_ON(wiphy->max_acl_mac_addrs &&
+		    (!(wiphy->flags & WIPHY_FLAG_HAVE_AP_SME) ||
+		     !rdev->ops->set_mac_acl)))
+		return -EINVAL;
+
 	if (wiphy->addresses)
 		memcpy(wiphy->perm_addr, wiphy->addresses[0].addr, ETH_ALEN);
 
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 33de80364c5c..b5978ab4ad7a 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -365,6 +365,8 @@ static const struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] = {
 	[NL80211_ATTR_SCAN_FLAGS] = { .type = NLA_U32 },
 	[NL80211_ATTR_P2P_CTWINDOW] = { .type = NLA_U8 },
 	[NL80211_ATTR_P2P_OPPPS] = { .type = NLA_U8 },
+	[NL80211_ATTR_ACL_POLICY] = {. type = NLA_U32 },
+	[NL80211_ATTR_MAC_ADDRS] = { .type = NLA_NESTED },
 };
 
 /* policy for the key attributes */
@@ -1268,6 +1270,12 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 portid, u32 seq, int flag
 		    dev->wiphy.ht_capa_mod_mask))
 		goto nla_put_failure;
 
+	if (dev->wiphy.flags & WIPHY_FLAG_HAVE_AP_SME &&
+	    dev->wiphy.max_acl_mac_addrs &&
+	    nla_put_u32(msg, NL80211_ATTR_MAC_ACL_MAX,
+			dev->wiphy.max_acl_mac_addrs))
+		goto nla_put_failure;
+
 	return genlmsg_end(msg, hdr);
 
  nla_put_failure:
@@ -2491,6 +2499,97 @@ static int nl80211_del_key(struct sk_buff *skb, struct genl_info *info)
 	return err;
 }
 
+/* This function returns an error or the number of nested attributes */
+static int validate_acl_mac_addrs(struct nlattr *nl_attr)
+{
+	struct nlattr *attr;
+	int n_entries = 0, tmp;
+
+	nla_for_each_nested(attr, nl_attr, tmp) {
+		if (nla_len(attr) != ETH_ALEN)
+			return -EINVAL;
+
+		n_entries++;
+	}
+
+	return n_entries;
+}
+
+/*
+ * This function parses ACL information and allocates memory for ACL data.
+ * On successful return, the calling function is responsible to free the
+ * ACL buffer returned by this function.
+ */
+static struct cfg80211_acl_data *parse_acl_data(struct wiphy *wiphy,
+						struct genl_info *info)
+{
+	enum nl80211_acl_policy acl_policy;
+	struct nlattr *attr;
+	struct cfg80211_acl_data *acl;
+	int i = 0, n_entries, tmp;
+
+	if (!wiphy->max_acl_mac_addrs)
+		return ERR_PTR(-EOPNOTSUPP);
+
+	if (!info->attrs[NL80211_ATTR_ACL_POLICY])
+		return ERR_PTR(-EINVAL);
+
+	acl_policy = nla_get_u32(info->attrs[NL80211_ATTR_ACL_POLICY]);
+	if (acl_policy != NL80211_ACL_POLICY_ACCEPT_UNLESS_LISTED &&
+	    acl_policy != NL80211_ACL_POLICY_DENY_UNLESS_LISTED)
+		return ERR_PTR(-EINVAL);
+
+	if (!info->attrs[NL80211_ATTR_MAC_ADDRS])
+		return ERR_PTR(-EINVAL);
+
+	n_entries = validate_acl_mac_addrs(info->attrs[NL80211_ATTR_MAC_ADDRS]);
+	if (n_entries < 0)
+		return ERR_PTR(n_entries);
+
+	if (n_entries > wiphy->max_acl_mac_addrs)
+		return ERR_PTR(-ENOTSUPP);
+
+	acl = kzalloc(sizeof(*acl) + (sizeof(struct mac_address) * n_entries),
+		      GFP_KERNEL);
+	if (!acl)
+		return ERR_PTR(-ENOMEM);
+
+	nla_for_each_nested(attr, info->attrs[NL80211_ATTR_MAC_ADDRS], tmp) {
+		memcpy(acl->mac_addrs[i].addr, nla_data(attr), ETH_ALEN);
+		i++;
+	}
+
+	acl->n_acl_entries = n_entries;
+	acl->acl_policy = acl_policy;
+
+	return acl;
+}
+
+static int nl80211_set_mac_acl(struct sk_buff *skb, struct genl_info *info)
+{
+	struct cfg80211_registered_device *rdev = info->user_ptr[0];
+	struct net_device *dev = info->user_ptr[1];
+	struct cfg80211_acl_data *acl;
+	int err;
+
+	if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP &&
+	    dev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_GO)
+		return -EOPNOTSUPP;
+
+	if (!dev->ieee80211_ptr->beacon_interval)
+		return -EINVAL;
+
+	acl = parse_acl_data(&rdev->wiphy, info);
+	if (IS_ERR(acl))
+		return PTR_ERR(acl);
+
+	err = rdev_set_mac_acl(rdev, dev, acl);
+
+	kfree(acl);
+
+	return err;
+}
+
 static int nl80211_parse_beacon(struct genl_info *info,
 				struct cfg80211_beacon_data *bcn)
 {
@@ -2734,6 +2833,12 @@ static int nl80211_start_ap(struct sk_buff *skb, struct genl_info *info)
 	if (err)
 		return err;
 
+	if (info->attrs[NL80211_ATTR_ACL_POLICY]) {
+		params.acl = parse_acl_data(&rdev->wiphy, info);
+		if (IS_ERR(params.acl))
+			return PTR_ERR(params.acl);
+	}
+
 	err = rdev_start_ap(rdev, dev, &params);
 	if (!err) {
 		wdev->preset_chandef = params.chandef;
@@ -2742,6 +2847,9 @@ static int nl80211_start_ap(struct sk_buff *skb, struct genl_info *info)
 		wdev->ssid_len = params.ssid_len;
 		memcpy(wdev->ssid, params.ssid, wdev->ssid_len);
 	}
+
+	kfree(params.acl);
+
 	return err;
 }
 
@@ -7876,6 +7984,14 @@ static struct genl_ops nl80211_ops[] = {
 		.internal_flags = NL80211_FLAG_NEED_NETDEV |
 				  NL80211_FLAG_NEED_RTNL,
 	},
+	{
+		.cmd = NL80211_CMD_SET_MAC_ACL,
+		.doit = nl80211_set_mac_acl,
+		.policy = nl80211_policy,
+		.flags = GENL_ADMIN_PERM,
+		.internal_flags = NL80211_FLAG_NEED_NETDEV |
+				  NL80211_FLAG_NEED_RTNL,
+	},
 };
 
 static struct genl_multicast_group nl80211_mlme_mcgrp = {
diff --git a/net/wireless/rdev-ops.h b/net/wireless/rdev-ops.h
index 6c0c8191f837..422d38291d66 100644
--- a/net/wireless/rdev-ops.h
+++ b/net/wireless/rdev-ops.h
@@ -875,4 +875,16 @@ static inline void rdev_stop_p2p_device(struct cfg80211_registered_device *rdev,
 	rdev->ops->stop_p2p_device(&rdev->wiphy, wdev);
 	trace_rdev_return_void(&rdev->wiphy);
 }					
+
+static inline int rdev_set_mac_acl(struct cfg80211_registered_device *rdev,
+				   struct net_device *dev,
+				   struct cfg80211_acl_data *params)
+{
+	int ret;
+
+	trace_rdev_set_mac_acl(&rdev->wiphy, dev, params);
+	ret = rdev->ops->set_mac_acl(&rdev->wiphy, dev, params);
+	trace_rdev_return_int(&rdev->wiphy, ret);
+	return ret;
+}
 #endif /* __CFG80211_RDEV_OPS */
diff --git a/net/wireless/trace.h b/net/wireless/trace.h
index 2134576f426e..8bc553199686 100644
--- a/net/wireless/trace.h
+++ b/net/wireless/trace.h
@@ -1767,6 +1767,24 @@ DEFINE_EVENT(wiphy_wdev_evt, rdev_stop_p2p_device,
 	TP_ARGS(wiphy, wdev)
 );
 
+TRACE_EVENT(rdev_set_mac_acl,
+	TP_PROTO(struct wiphy *wiphy, struct net_device *netdev,
+		 struct cfg80211_acl_data *params),
+	TP_ARGS(wiphy, netdev, params),
+	TP_STRUCT__entry(
+		WIPHY_ENTRY
+		NETDEV_ENTRY
+		__field(u32, acl_policy)
+	),
+	TP_fast_assign(
+		WIPHY_ASSIGN;
+		WIPHY_ASSIGN;
+		__entry->acl_policy = params->acl_policy;
+	),
+	TP_printk(WIPHY_PR_FMT ", " NETDEV_PR_FMT ", acl policy: %d",
+		  WIPHY_PR_ARG, NETDEV_PR_ARG, __entry->acl_policy)
+);
+
 /*************************************************************
  *	     cfg80211 exported functions traces		     *
  *************************************************************/

From 3b4797bce0050570e84bedd10e1b14e9320a3551 Mon Sep 17 00:00:00 2001
From: Thomas Pedersen <thomas@cozybit.com>
Date: Sat, 26 Jan 2013 17:00:02 -0800
Subject: [PATCH 15/15] mac80211: fix mesh_sta_info_get() reshuffle damage

Before "mac80211: clean up mesh sta allocation warning"
was applied, mesh_sta_info_get() was reshuffled to please
sparse. As a result we neglect to initialize newly created
STAs. Fix this.

Signed-off-by: Thomas Pedersen <thomas@cozybit.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/mac80211/mesh_plink.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c
index 4e1d406fd9b1..81e612682bc3 100644
--- a/net/mac80211/mesh_plink.c
+++ b/net/mac80211/mesh_plink.c
@@ -408,6 +408,8 @@ mesh_sta_info_get(struct ieee80211_sub_if_data *sdata,
 			return NULL;
 		}
 
+		mesh_sta_info_init(sdata, sta, elems, true);
+
 		if (sta_info_insert_rcu(sta))
 			return NULL;
 	}