iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

emac: Fix EMAC soft reset on 460EX/GT

Browse Source 
Fix EMAC soft reset on 460EX/GT to select the right PHY clock source
before and after the soft reset.

EMAC with PHY should use the clock from PHY during soft reset.
EMAC without PHY should use the internal clock during soft reset.

PPC460EX/GT Embedded Processor Advanced User's Manual
section 28.10.1 Mode Register 0 (EMACx_MR0) states:
Note: The PHY must provide a TX Clk in order to perform a soft reset
of the EMAC. If none is present, select the internal clock
(SDR0_ETH_CFG[EMACx_PHY_CLK] = 1).
After a soft reset, select the external clock.

Without the fix, 460EX/GT-based boards with RGMII PHYs attached to
EMACs experience EMAC interrupt storm and system watchdog reset when
issuing "ifconfig eth0 down" + "ifconfig eth0 up" a few times.
The system enters endless loop of serving emac_irq() with EMACx_ISR
register stuck at value 0x10000000 (Rx parity error).

With the fix, the above issue is no longer observed.

Signed-off-by: Petri Gynther <pgynther@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Petri Gynther 2013-05-09 16:50:00 +00:00 committed by David S. Miller
parent 4b264a1676
commit 23fbb5a87c
1 changed files with 28 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

36
drivers/net/ethernet/ibm/emac/core.c
View File

@ -359,10 +359,26 @@ static int emac_reset(struct emac_instance *dev)
}
#ifdef CONFIG_PPC_DCR_NATIVE
/* Enable internal clock source */
if (emac_has_feature(dev, EMAC_FTR_460EX_PHY_CLK_FIX))
dcri_clrset(SDR0, SDR0_ETH_CFG,
0, SDR0_ETH_CFG_ECS << dev->cell_index);
/*
* PPC460EX/GT Embedded Processor Advanced User's Manual
* section 28.10.1 Mode Register 0 (EMACx_MR0) states:
* Note: The PHY must provide a TX Clk in order to perform a soft reset
* of the EMAC. If none is present, select the internal clock
* (SDR0_ETH_CFG[EMACx_PHY_CLK] = 1).
* After a soft reset, select the external clock.
*/
if (emac_has_feature(dev, EMAC_FTR_460EX_PHY_CLK_FIX)) {
if (dev->phy_address == 0xffffffff &&
dev->phy_map == 0xffffffff) {
/* No PHY: select internal loop clock before reset */
dcri_clrset(SDR0, SDR0_ETH_CFG,
0, SDR0_ETH_CFG_ECS << dev->cell_index);
} else {
/* PHY present: select external clock before reset */
dcri_clrset(SDR0, SDR0_ETH_CFG,
SDR0_ETH_CFG_ECS << dev->cell_index, 0);
}
}
#endif
out_be32(&p->mr0, EMAC_MR0_SRST);
@ -370,10 +386,14 @@ static int emac_reset(struct emac_instance *dev)
--n;
#ifdef CONFIG_PPC_DCR_NATIVE
/* Enable external clock source */
if (emac_has_feature(dev, EMAC_FTR_460EX_PHY_CLK_FIX))
dcri_clrset(SDR0, SDR0_ETH_CFG,
SDR0_ETH_CFG_ECS << dev->cell_index, 0);
if (emac_has_feature(dev, EMAC_FTR_460EX_PHY_CLK_FIX)) {
if (dev->phy_address == 0xffffffff &&
dev->phy_map == 0xffffffff) {
/* No PHY: restore external clock source after reset */
dcri_clrset(SDR0, SDR0_ETH_CFG,
SDR0_ETH_CFG_ECS << dev->cell_index, 0);
}
}
#endif
if (n) {