diff --git a/Documentation/devicetree/bindings/hwmon/ibmpowernv.txt b/Documentation/devicetree/bindings/hwmon/ibmpowernv.txt new file mode 100644 index 000000000000..f93242be60a1 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/ibmpowernv.txt @@ -0,0 +1,23 @@ +IBM POWERNV platform sensors +---------------------------- + +Required node properties: +- compatible: must be one of + "ibm,opal-sensor-cooling-fan" + "ibm,opal-sensor-amb-temp" + "ibm,opal-sensor-power-supply" + "ibm,opal-sensor-power" +- sensor-id: an opaque id provided by the firmware to the kernel, identifies a + given sensor and its attribute data + +Example sensors node: + +cooling-fan#8-data { + sensor-id = <0x7052107>; + compatible = "ibm,opal-sensor-cooling-fan"; +}; + +amb-temp#1-thrs { + sensor-id = <0x5096000>; + compatible = "ibm,opal-sensor-amb-temp"; +}; diff --git a/Documentation/hwmon/ibmpowernv b/Documentation/hwmon/ibmpowernv new file mode 100644 index 000000000000..8826ba29db36 --- /dev/null +++ b/Documentation/hwmon/ibmpowernv @@ -0,0 +1,41 @@ +Kernel Driver IBMPOWERNV +======================== + +Supported systems: + * Any recent IBM P servers based on POWERNV platform + +Author: Neelesh Gupta + +Description +----------- + +This driver implements reading the platform sensors data like temperature/fan/ +voltage/power for 'POWERNV' platform. + +The driver uses the platform device infrastructure. It probes the device tree +for sensor devices during the __init phase and registers them with the 'hwmon'. +'hwmon' populates the 'sysfs' tree having attribute files, each for a given +sensor type and its attribute data. + +All the nodes in the DT appear under "/ibm,opal/sensors" and each valid node in +the DT maps to an attribute file in 'sysfs'. The node exports unique 'sensor-id' +which the driver uses to make an OPAL call to the firmware. + +Usage notes +----------- +The driver is built statically with the kernel by enabling the config +CONFIG_SENSORS_IBMPOWERNV. It can also be built as module 'ibmpowernv'. + +Sysfs attributes +---------------- + +fanX_input Measured RPM value. +fanX_min Threshold RPM for alert generation. +fanX_fault 0: No fail condition + 1: Failing fan +tempX_input Measured ambient temperature. +tempX_max Threshold ambient temperature for alert generation. +inX_input Measured power supply voltage +inX_fault 0: No fail condition. + 1: Failing power supply. +power1_input System power consumption (microWatt) diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 37908ff8f7ff..c0aec8db462f 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -554,6 +554,17 @@ config SENSORS_IBMPEX This driver can also be built as a module. If so, the module will be called ibmpex. +config SENSORS_IBMPOWERNV + tristate "IBM POWERNV platform sensors" + depends on PPC_POWERNV + default y + help + If you say yes here you get support for the temperature/fan/power + sensors on your PowerNV platform. + + This driver can also be built as a module. If so, the module + will be called ibmpowernv. + config SENSORS_IIO_HWMON tristate "Hwmon driver that uses channels specified via iio maps" depends on IIO diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 1362382a3187..f4435ea6b169 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -71,6 +71,7 @@ obj-$(CONFIG_SENSORS_ULTRA45) += ultra45_env.o obj-$(CONFIG_SENSORS_I5K_AMB) += i5k_amb.o obj-$(CONFIG_SENSORS_IBMAEM) += ibmaem.o obj-$(CONFIG_SENSORS_IBMPEX) += ibmpex.o +obj-$(CONFIG_SENSORS_IBMPOWERNV)+= ibmpowernv.o obj-$(CONFIG_SENSORS_IIO_HWMON) += iio_hwmon.o obj-$(CONFIG_SENSORS_INA209) += ina209.o obj-$(CONFIG_SENSORS_INA2XX) += ina2xx.o diff --git a/drivers/hwmon/ibmpowernv.c b/drivers/hwmon/ibmpowernv.c new file mode 100644 index 000000000000..e6b652a35815 --- /dev/null +++ b/drivers/hwmon/ibmpowernv.c @@ -0,0 +1,364 @@ +/* + * IBM PowerNV platform sensors for temperature/fan/voltage/power + * Copyright (C) 2014 IBM + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. + */ + +#define DRVNAME "ibmpowernv" +#define pr_fmt(fmt) DRVNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#define MAX_ATTR_LEN 32 + +/* Sensor suffix name from DT */ +#define DT_FAULT_ATTR_SUFFIX "faulted" +#define DT_DATA_ATTR_SUFFIX "data" +#define DT_THRESHOLD_ATTR_SUFFIX "thrs" + +/* + * Enumerates all the types of sensors in the POWERNV platform and does index + * into 'struct sensor_group' + */ +enum sensors { + FAN, + AMBIENT_TEMP, + POWER_SUPPLY, + POWER_INPUT, + MAX_SENSOR_TYPE, +}; + +static struct sensor_group { + const char *name; + const char *compatible; + struct attribute_group group; + u32 attr_count; +} sensor_groups[] = { + {"fan", "ibm,opal-sensor-cooling-fan"}, + {"temp", "ibm,opal-sensor-amb-temp"}, + {"in", "ibm,opal-sensor-power-supply"}, + {"power", "ibm,opal-sensor-power"} +}; + +struct sensor_data { + u32 id; /* An opaque id of the firmware for each sensor */ + enum sensors type; + char name[MAX_ATTR_LEN]; + struct device_attribute dev_attr; +}; + +struct platform_data { + const struct attribute_group *attr_groups[MAX_SENSOR_TYPE + 1]; + u32 sensors_count; /* Total count of sensors from each group */ +}; + +/* Platform device representing all the ibmpowernv sensors */ +static struct platform_device *pdevice; + +static ssize_t show_sensor(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct sensor_data *sdata = container_of(devattr, struct sensor_data, + dev_attr); + ssize_t ret; + u32 x; + + ret = opal_get_sensor_data(sdata->id, &x); + if (ret) + return ret; + + /* Convert temperature to milli-degrees */ + if (sdata->type == AMBIENT_TEMP) + x *= 1000; + /* Convert power to micro-watts */ + else if (sdata->type == POWER_INPUT) + x *= 1000000; + + return sprintf(buf, "%u\n", x); +} + +static int __init get_sensor_index_attr(const char *name, u32 *index, + char *attr) +{ + char *hash_pos = strchr(name, '#'); + char buf[8] = { 0 }; + char *dash_pos; + u32 copy_len; + int err; + + if (!hash_pos) + return -EINVAL; + + dash_pos = strchr(hash_pos, '-'); + if (!dash_pos) + return -EINVAL; + + copy_len = dash_pos - hash_pos - 1; + if (copy_len >= sizeof(buf)) + return -EINVAL; + + strncpy(buf, hash_pos + 1, copy_len); + + err = kstrtou32(buf, 10, index); + if (err) + return err; + + strncpy(attr, dash_pos + 1, MAX_ATTR_LEN); + + return 0; +} + +/* + * This function translates the DT node name into the 'hwmon' attribute name. + * IBMPOWERNV device node appear like cooling-fan#2-data, amb-temp#1-thrs etc. + * which need to be mapped as fan2_input, temp1_max respectively before + * populating them inside hwmon device class. + */ +static int __init create_hwmon_attr_name(struct device *dev, enum sensors type, + const char *node_name, + char *hwmon_attr_name) +{ + char attr_suffix[MAX_ATTR_LEN]; + char *attr_name; + u32 index; + int err; + + err = get_sensor_index_attr(node_name, &index, attr_suffix); + if (err) { + dev_err(dev, "Sensor device node name '%s' is invalid\n", + node_name); + return err; + } + + if (!strcmp(attr_suffix, DT_FAULT_ATTR_SUFFIX)) { + attr_name = "fault"; + } else if (!strcmp(attr_suffix, DT_DATA_ATTR_SUFFIX)) { + attr_name = "input"; + } else if (!strcmp(attr_suffix, DT_THRESHOLD_ATTR_SUFFIX)) { + if (type == AMBIENT_TEMP) + attr_name = "max"; + else if (type == FAN) + attr_name = "min"; + else + return -ENOENT; + } else { + return -ENOENT; + } + + snprintf(hwmon_attr_name, MAX_ATTR_LEN, "%s%d_%s", + sensor_groups[type].name, index, attr_name); + return 0; +} + +static int __init populate_attr_groups(struct platform_device *pdev) +{ + struct platform_data *pdata = platform_get_drvdata(pdev); + const struct attribute_group **pgroups = pdata->attr_groups; + struct device_node *opal, *np; + enum sensors type; + + opal = of_find_node_by_path("/ibm,opal/sensors"); + if (!opal) { + dev_err(&pdev->dev, "Opal node 'sensors' not found\n"); + return -ENODEV; + } + + for_each_child_of_node(opal, np) { + if (np->name == NULL) + continue; + + for (type = 0; type < MAX_SENSOR_TYPE; type++) + if (of_device_is_compatible(np, + sensor_groups[type].compatible)) { + sensor_groups[type].attr_count++; + break; + } + } + + of_node_put(opal); + + for (type = 0; type < MAX_SENSOR_TYPE; type++) { + sensor_groups[type].group.attrs = devm_kzalloc(&pdev->dev, + sizeof(struct attribute *) * + (sensor_groups[type].attr_count + 1), + GFP_KERNEL); + if (!sensor_groups[type].group.attrs) + return -ENOMEM; + + pgroups[type] = &sensor_groups[type].group; + pdata->sensors_count += sensor_groups[type].attr_count; + sensor_groups[type].attr_count = 0; + } + + return 0; +} + +/* + * Iterate through the device tree for each child of 'sensors' node, create + * a sysfs attribute file, the file is named by translating the DT node name + * to the name required by the higher 'hwmon' driver like fan1_input, temp1_max + * etc.. + */ +static int __init create_device_attrs(struct platform_device *pdev) +{ + struct platform_data *pdata = platform_get_drvdata(pdev); + const struct attribute_group **pgroups = pdata->attr_groups; + struct device_node *opal, *np; + struct sensor_data *sdata; + const __be32 *sensor_id; + enum sensors type; + u32 count = 0; + int err = 0; + + opal = of_find_node_by_path("/ibm,opal/sensors"); + sdata = devm_kzalloc(&pdev->dev, pdata->sensors_count * sizeof(*sdata), + GFP_KERNEL); + if (!sdata) { + err = -ENOMEM; + goto exit_put_node; + } + + for_each_child_of_node(opal, np) { + if (np->name == NULL) + continue; + + for (type = 0; type < MAX_SENSOR_TYPE; type++) + if (of_device_is_compatible(np, + sensor_groups[type].compatible)) + break; + + if (type == MAX_SENSOR_TYPE) + continue; + + sensor_id = of_get_property(np, "sensor-id", NULL); + if (!sensor_id) { + dev_info(&pdev->dev, + "'sensor-id' missing in the node '%s'\n", + np->name); + continue; + } + + sdata[count].id = be32_to_cpup(sensor_id); + sdata[count].type = type; + err = create_hwmon_attr_name(&pdev->dev, type, np->name, + sdata[count].name); + if (err) + goto exit_put_node; + + sysfs_attr_init(&sdata[count].dev_attr.attr); + sdata[count].dev_attr.attr.name = sdata[count].name; + sdata[count].dev_attr.attr.mode = S_IRUGO; + sdata[count].dev_attr.show = show_sensor; + + pgroups[type]->attrs[sensor_groups[type].attr_count++] = + &sdata[count++].dev_attr.attr; + } + +exit_put_node: + of_node_put(opal); + return err; +} + +static int __init ibmpowernv_probe(struct platform_device *pdev) +{ + struct platform_data *pdata; + struct device *hwmon_dev; + int err; + + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return -ENOMEM; + + platform_set_drvdata(pdev, pdata); + pdata->sensors_count = 0; + err = populate_attr_groups(pdev); + if (err) + return err; + + /* Create sysfs attribute data for each sensor found in the DT */ + err = create_device_attrs(pdev); + if (err) + return err; + + /* Finally, register with hwmon */ + hwmon_dev = devm_hwmon_device_register_with_groups(&pdev->dev, DRVNAME, + pdata, + pdata->attr_groups); + + return PTR_ERR_OR_ZERO(hwmon_dev); +} + +static struct platform_driver ibmpowernv_driver = { + .driver = { + .owner = THIS_MODULE, + .name = DRVNAME, + }, +}; + +static int __init ibmpowernv_init(void) +{ + int err; + + pdevice = platform_device_alloc(DRVNAME, 0); + if (!pdevice) { + pr_err("Device allocation failed\n"); + err = -ENOMEM; + goto exit; + } + + err = platform_device_add(pdevice); + if (err) { + pr_err("Device addition failed (%d)\n", err); + goto exit_device_put; + } + + err = platform_driver_probe(&ibmpowernv_driver, ibmpowernv_probe); + if (err) { + pr_err("Platfrom driver probe failed\n"); + goto exit_device_del; + } + + return 0; + +exit_device_del: + platform_device_del(pdevice); +exit_device_put: + platform_device_put(pdevice); +exit: + return err; +} + +static void __exit ibmpowernv_exit(void) +{ + platform_driver_unregister(&ibmpowernv_driver); + platform_device_unregister(pdevice); +} + +MODULE_AUTHOR("Neelesh Gupta "); +MODULE_DESCRIPTION("IBM POWERNV platform sensors"); +MODULE_LICENSE("GPL"); + +module_init(ibmpowernv_init); +module_exit(ibmpowernv_exit);