arm64: dts: qcom: sm8250-xiaomi-pipa: Add initial device tree
Initial support for Xiaomi Pad 6 tablet, that have sm8250 soc. Signed-off-by: Luka Panio <lukapanio@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20231125220315.118922-2-lukapanio@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This commit is contained in:
Luka Panio
Bjorn Andersson
parent
25bb226508
commit
264beb3cbd
@ -223,6 +223,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8250-sony-xperia-edo-pdx203.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sm8250-sony-xperia-edo-pdx206.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sm8250-xiaomi-elish-boe.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sm8250-xiaomi-elish-csot.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sm8250-xiaomi-pipa.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sm8350-hdk.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sm8350-microsoft-surface-duo2.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sm8350-mtp.dtb
|
||||
|
||||
623
arch/arm64/boot/dts/qcom/sm8250-xiaomi-pipa.dts
Normal file
623
arch/arm64/boot/dts/qcom/sm8250-xiaomi-pipa.dts
Normal file
@ -0,0 +1,623 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
||||
/*
|
||||
* Copyright (c) 2023 Luka Panio <lukapanio@gmail.com>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/arm/qcom,ids.h>
|
||||
#include <dt-bindings/phy/phy.h>
|
||||
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
|
||||
#include "sm8250.dtsi"
|
||||
#include "pm8150.dtsi"
|
||||
#include "pm8150b.dtsi"
|
||||
#include "pm8150l.dtsi"
|
||||
#include "pm8009.dtsi"
|
||||
|
||||
/*
|
||||
* Delete following upstream (sm8250.dtsi) reserved
|
||||
* memory mappings which are different on this device.
|
||||
*/
|
||||
/delete-node/ &adsp_mem;
|
||||
/delete-node/ &cdsp_secure_heap;
|
||||
/delete-node/ &slpi_mem;
|
||||
/delete-node/ &spss_mem;
|
||||
/delete-node/ &xbl_aop_mem;
|
||||
|
||||
/ {
|
||||
|
||||
model = "Xiaomi Pad 6";
|
||||
compatible = "xiaomi,pipa", "qcom,sm8250";
|
||||
|
||||
chassis-type = "tablet";
|
||||
|
||||
/* required for bootloader to select correct board */
|
||||
qcom,msm-id = <QCOM_ID_SM8250 0x20001>; /* SM8250 v2.1 */
|
||||
qcom,board-id = <0x34 0>;
|
||||
|
||||
chosen {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
framebuffer: framebuffer@9c000000 {
|
||||
compatible = "simple-framebuffer";
|
||||
reg = <0x0 0x9c000000 0x0 0x2300000>;
|
||||
width = <1800>;
|
||||
height = <2880>;
|
||||
stride = <(1800 * 4)>;
|
||||
format = "a8r8g8b8";
|
||||
};
|
||||
};
|
||||
|
||||
battery_l: battery-l {
|
||||
compatible = "simple-battery";
|
||||
voltage-min-design-microvolt = <3870000>;
|
||||
energy-full-design-microwatt-hours = <16700000>;
|
||||
charge-full-design-microamp-hours = <4420000>;
|
||||
};
|
||||
|
||||
battery_r: battery-r {
|
||||
compatible = "simple-battery";
|
||||
voltage-min-design-microvolt = <3870000>;
|
||||
energy-full-design-microwatt-hours = <16700000>;
|
||||
charge-full-design-microamp-hours = <4420000>;
|
||||
};
|
||||
|
||||
bl_vddpos_5p5: bl-vddpos-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "bl_vddpos_5p5";
|
||||
regulator-min-microvolt = <5500000>;
|
||||
regulator-max-microvolt = <5500000>;
|
||||
regulator-enable-ramp-delay = <233>;
|
||||
gpio = <&tlmm 130 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
bl_vddneg_5p5: bl-vddneg-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "bl_vddneg_5p5";
|
||||
regulator-min-microvolt = <5500000>;
|
||||
regulator-max-microvolt = <5500000>;
|
||||
regulator-enable-ramp-delay = <233>;
|
||||
gpio = <&tlmm 131 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
gpio_keys: gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
pinctrl-0 = <&vol_up_n>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
key-vol-up {
|
||||
label = "Volume Up";
|
||||
gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
debounce-interval = <15>;
|
||||
linux,can-disable;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
vph_pwr: vph-pwr-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vph_pwr";
|
||||
regulator-min-microvolt = <3700000>;
|
||||
regulator-max-microvolt = <3700000>;
|
||||
};
|
||||
|
||||
/* S6c is really ebi.lvl but it's there for supply map completeness sake. */
|
||||
vreg_s6c_0p88: smpc6-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vreg_s6c_0p88";
|
||||
regulator-min-microvolt = <880000>;
|
||||
regulator-max-microvolt = <880000>;
|
||||
regulator-always-on;
|
||||
vin-supply = <&vph_pwr>;
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
xbl_aop_mem: xbl-aop@80700000 {
|
||||
reg = <0x0 0x80600000 0x0 0x260000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
slpi_mem: slpi@88c00000 {
|
||||
reg = <0x0 0x88c00000 0x0 0x2f00000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
adsp_mem: adsp@8bb00000 {
|
||||
reg = <0x0 0x8bb00000 0x0 0x2500000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
spss_mem: spss@8e000000 {
|
||||
reg = <0x0 0x8e000000 0x0 0x100000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
cdsp_secure_heap: cdsp-secure-heap@8e100000 {
|
||||
reg = <0x0 0x8e100000 0x0 0x4600000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
cont_splash_mem: cont-splash@9c000000 {
|
||||
reg = <0x0 0x9c000000 0x0 0x2300000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
ramoops@b0000000 {
|
||||
compatible = "ramoops";
|
||||
reg = <0x0 0xb0000000 0x0 0x400000>;
|
||||
record-size = <0x1000>;
|
||||
console-size = <0x200000>;
|
||||
ecc-size = <16>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&adsp {
|
||||
firmware-name = "qcom/sm8250/xiaomi/pipa/adsp.mbn";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&apps_rsc {
|
||||
regulators-0 {
|
||||
compatible = "qcom,pm8150-rpmh-regulators";
|
||||
qcom,pmic-id = "a";
|
||||
|
||||
vdd-s1-supply = <&vph_pwr>;
|
||||
vdd-s2-supply = <&vph_pwr>;
|
||||
vdd-s3-supply = <&vph_pwr>;
|
||||
vdd-s4-supply = <&vph_pwr>;
|
||||
vdd-s5-supply = <&vph_pwr>;
|
||||
vdd-s6-supply = <&vph_pwr>;
|
||||
vdd-s7-supply = <&vph_pwr>;
|
||||
vdd-s8-supply = <&vph_pwr>;
|
||||
vdd-s9-supply = <&vph_pwr>;
|
||||
vdd-s10-supply = <&vph_pwr>;
|
||||
vdd-l1-l8-l11-supply = <&vreg_s6c_0p88>;
|
||||
vdd-l2-l10-supply = <&vreg_bob>;
|
||||
vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p95>;
|
||||
vdd-l6-l9-supply = <&vreg_s8c_1p35>;
|
||||
vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
|
||||
vdd-l13-l16-l17-supply = <&vreg_bob>;
|
||||
|
||||
/* (S1+S2+S3) - cx.lvl (ARC) */
|
||||
|
||||
vreg_s4a_1p8: smps4 {
|
||||
regulator-name = "vreg_s4a_1p8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1920000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
regulator-allow-set-load;
|
||||
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
||||
RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_s5a_1p9: smps5 {
|
||||
regulator-name = "vreg_s5a_1p9";
|
||||
regulator-min-microvolt = <1900000>;
|
||||
regulator-max-microvolt = <2040000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_s6a_0p95: smps6 {
|
||||
regulator-name = "vreg_s6a_0p95";
|
||||
regulator-min-microvolt = <600000>;
|
||||
regulator-max-microvolt = <1128000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l2a_3p1: ldo2 {
|
||||
regulator-name = "vreg_l2a_3p1";
|
||||
regulator-min-microvolt = <3072000>;
|
||||
regulator-max-microvolt = <3072000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l3a_0p9: ldo3 {
|
||||
regulator-name = "vreg_l3a_0p9";
|
||||
regulator-min-microvolt = <928000>;
|
||||
regulator-max-microvolt = <932000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
/* L4 - lmx.lvl (ARC) */
|
||||
|
||||
vreg_l5a_0p88: ldo5 {
|
||||
regulator-name = "vreg_l5a_0p88";
|
||||
regulator-min-microvolt = <880000>;
|
||||
regulator-max-microvolt = <880000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l6a_1p2: ldo6 {
|
||||
regulator-name = "vreg_l6a_1p2";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
regulator-allow-set-load;
|
||||
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
||||
RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
/* L7 is unused. */
|
||||
|
||||
vreg_l9a_1p2: ldo9 {
|
||||
regulator-name = "vreg_l9a_1p2";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
/* L10 is unused, L11 - lcx.lvl (ARC) */
|
||||
|
||||
vreg_l12a_1p8: ldo12 {
|
||||
regulator-name = "vreg_l12a_1p8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
/* L13 is unused. */
|
||||
|
||||
vreg_l14a_1p88: ldo14 {
|
||||
regulator-name = "vreg_l14a_1p88";
|
||||
regulator-min-microvolt = <1880000>;
|
||||
regulator-max-microvolt = <1880000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
/* L15 & L16 are unused. */
|
||||
|
||||
vreg_l17a_3p0: ldo17 {
|
||||
regulator-name = "vreg_l17a_3p0";
|
||||
regulator-min-microvolt = <2496000>;
|
||||
regulator-max-microvolt = <3008000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
regulator-allow-set-load;
|
||||
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
||||
RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l18a_0p9: ldo18 {
|
||||
regulator-name = "vreg_l18a_0p9";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <920000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
};
|
||||
|
||||
regulators-1 {
|
||||
compatible = "qcom,pm8150l-rpmh-regulators";
|
||||
qcom,pmic-id = "c";
|
||||
|
||||
vdd-s1-supply = <&vph_pwr>;
|
||||
vdd-s2-supply = <&vph_pwr>;
|
||||
vdd-s3-supply = <&vph_pwr>;
|
||||
vdd-s4-supply = <&vph_pwr>;
|
||||
vdd-s5-supply = <&vph_pwr>;
|
||||
vdd-s6-supply = <&vph_pwr>;
|
||||
vdd-s7-supply = <&vph_pwr>;
|
||||
vdd-s8-supply = <&vph_pwr>;
|
||||
vdd-l1-l8-supply = <&vreg_s4a_1p8>;
|
||||
vdd-l2-l3-supply = <&vreg_s8c_1p35>;
|
||||
vdd-l4-l5-l6-supply = <&vreg_bob>;
|
||||
vdd-l7-l11-supply = <&vreg_bob>;
|
||||
vdd-l9-l10-supply = <&vreg_bob>;
|
||||
vdd-bob-supply = <&vph_pwr>;
|
||||
|
||||
vreg_bob: bob {
|
||||
regulator-name = "vreg_bob";
|
||||
regulator-min-microvolt = <3350000>;
|
||||
regulator-max-microvolt = <3960000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
|
||||
};
|
||||
|
||||
/*
|
||||
* S1-S6 are ARCs:
|
||||
* (S1+S2) - gfx.lvl,
|
||||
* S3 - mx.lvl,
|
||||
* (S4+S5) - mmcx.lvl,
|
||||
* S6 - ebi.lvl
|
||||
*/
|
||||
|
||||
vreg_s7c_0p35: smps7 {
|
||||
regulator-name = "vreg_s7c_0p35";
|
||||
regulator-min-microvolt = <348000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_s8c_1p35: smps8 {
|
||||
regulator-name = "vreg_s8c_1p35";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1400000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l1c_1p8: ldo1 {
|
||||
regulator-name = "vreg_l1c_1p8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
/* L2-4 are unused. */
|
||||
|
||||
vreg_l5c_1p8: ldo5 {
|
||||
regulator-name = "vreg_l5c_1p8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l6c_2p9: ldo6 {
|
||||
regulator-name = "vreg_l6c_2p9";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2960000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
regulator-allow-set-load;
|
||||
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
||||
RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l7c_2p85: ldo7 {
|
||||
regulator-name = "vreg_l7c_2p85";
|
||||
regulator-min-microvolt = <2856000>;
|
||||
regulator-max-microvolt = <3104000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l8c_1p8: ldo8 {
|
||||
regulator-name = "vreg_l8c_1p8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l9c_2p9: ldo9 {
|
||||
regulator-name = "vreg_l9c_2p9";
|
||||
regulator-min-microvolt = <2704000>;
|
||||
regulator-max-microvolt = <2960000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
regulator-allow-set-load;
|
||||
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
||||
RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l10c_3p3: ldo10 {
|
||||
regulator-name = "vreg_l10c_3p3";
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3312000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l11c_3p0: ldo11 {
|
||||
regulator-name = "vreg_l11c_3p0";
|
||||
regulator-min-microvolt = <3104000>;
|
||||
regulator-max-microvolt = <3304000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
};
|
||||
|
||||
regulators-2 {
|
||||
compatible = "qcom,pm8009-rpmh-regulators";
|
||||
qcom,pmic-id = "f";
|
||||
|
||||
vdd-s1-supply = <&vph_pwr>;
|
||||
vdd-s2-supply = <&vreg_bob>;
|
||||
vdd-l2-supply = <&vreg_s8c_1p35>;
|
||||
vdd-l5-l6-supply = <&vreg_bob>;
|
||||
vdd-l7-supply = <&vreg_s4a_1p8>;
|
||||
|
||||
vreg_s1f_1p2: smps1 {
|
||||
regulator-name = "vreg_s1f_1p2";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1300000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_s2f_0p5: smps2 {
|
||||
regulator-name = "vreg_s2f_0p5";
|
||||
regulator-min-microvolt = <512000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
/* L1 is unused. */
|
||||
|
||||
vreg_l2f_1p3: ldo2 {
|
||||
regulator-name = "vreg_l2f_1p3";
|
||||
regulator-min-microvolt = <1056000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
/* L3 & L4 are unused. */
|
||||
|
||||
vreg_l5f_2p8: ldo5 {
|
||||
regulator-name = "vreg_l5f_2p85";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l6f_2p8: ldo6 {
|
||||
regulator-name = "vreg_l6f_2p8";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l7f_1p8: ldo7 {
|
||||
regulator-name = "vreg_l7f_1p8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&cdsp {
|
||||
firmware-name = "qcom/sm8250/xiaomi/pipa/cdsp.mbn";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpi_dma0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpi_dma1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpi_dma2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpu {
|
||||
status = "okay";
|
||||
|
||||
zap-shader {
|
||||
memory-region = <&gpu_mem>;
|
||||
firmware-name = "qcom/sm8250/xiaomi/pipa/a650_zap.mbn";
|
||||
};
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
clock-frequency = <400000>;
|
||||
status = "okay";
|
||||
|
||||
fuel-gauge@55 {
|
||||
compatible = "ti,bq27z561";
|
||||
reg = <0x55>;
|
||||
monitored-battery = <&battery_r>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c11 {
|
||||
clock-frequency = <400000>;
|
||||
status = "okay";
|
||||
|
||||
backlight: backlight@11 {
|
||||
compatible = "kinetic,ktz8866";
|
||||
reg = <0x11>;
|
||||
vddpos-supply = <&bl_vddpos_5p5>;
|
||||
vddneg-supply = <&bl_vddneg_5p5>;
|
||||
enable-gpios = <&tlmm 139 GPIO_ACTIVE_HIGH>;
|
||||
current-num-sinks = <5>;
|
||||
kinetic,current-ramp-delay-ms = <128>;
|
||||
kinetic,led-enable-ramp-delay-ms = <1>;
|
||||
kinetic,enable-lcd-bias;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c13 {
|
||||
clock-frequency = <400000>;
|
||||
status = "okay";
|
||||
|
||||
fuel-gauge@55 {
|
||||
compatible = "ti,bq27z561";
|
||||
reg = <0x55>;
|
||||
monitored-battery = <&battery_l>;
|
||||
};
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0_phy {
|
||||
vdda-phy-supply = <&vreg_l5a_0p88>;
|
||||
vdda-pll-supply = <&vreg_l9a_1p2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pm8150_gpios {
|
||||
vol_up_n: vol-up-n-state {
|
||||
pins = "gpio6";
|
||||
function = "normal";
|
||||
power-source = <1>;
|
||||
input-enable;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
&pon_pwrkey {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pon_resin {
|
||||
linux,code = <KEY_VOLUMEDOWN>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qupv3_id_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qupv3_id_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qupv3_id_2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&slpi {
|
||||
firmware-name = "qcom/sm8250/xiaomi/pipa/slpi.mbn";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_1_dwc3 {
|
||||
dr_mode = "peripheral";
|
||||
};
|
||||
|
||||
&usb_1_hsphy {
|
||||
vdda-pll-supply = <&vreg_l5a_0p88>;
|
||||
vdda18-supply = <&vreg_l12a_1p8>;
|
||||
vdda33-supply = <&vreg_l2a_3p1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_1_qmpphy {
|
||||
status = "okay";
|
||||
vdda-phy-supply = <&vreg_l9a_1p2>;
|
||||
vdda-pll-supply = <&vreg_l18a_0p9>;
|
||||
};
|
||||
|
||||
&ufs_mem_hc {
|
||||
vcc-supply = <&vreg_l17a_3p0>;
|
||||
vcc-max-microamp = <800000>;
|
||||
vccq-supply = <&vreg_l6a_1p2>;
|
||||
vccq-max-microamp = <800000>;
|
||||
vccq2-supply = <&vreg_s4a_1p8>;
|
||||
vccq2-max-microamp = <800000>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ufs_mem_phy {
|
||||
vdda-phy-supply = <&vreg_l5a_0p88>;
|
||||
vdda-pll-supply = <&vreg_l9a_1p2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&venus {
|
||||
firmware-name = "qcom/sm8250/xiaomi/pipa/venus.mbn";
|
||||
status = "okay";
|
||||
};
|
||||
Loading…
x
Reference in New Issue
Block a user