arm64: dts: rockchip: Add Turing RK1 SoM support
The Turing RK1 is an upcoming RK3588-based SoM from Turing Machines, designed on the Jetson SO-DIMM form factor and meant to be compatible with most Jetson carrier boards (but especially the Turing Pi 2 cluster board from the same vendor). It has the typical I/O you'd expect from a Jetson board, including: - Two UARTs (UART9 for console, UART2 is auxiliary) - PCI Express (2.0 x1 + 3.0 x4) - Gigabit Ethernet - On-board eMMC - PWM fan w/ tach - USB-OTG [1] - HDMI and MIPI DSI [1] - Miscellaneous external GPIO, I²C, SPI lines [1] Beyond that, it is pretty similar to the RK3588 EVB (in terms of PMICs, RTC, etc). While this is absolutely a SoM, it is a little bit special in that it's marketed directly to users as a compute node, while most SoMs are intended to be a part/module incorporated into a larger system. Because of this, a majority of the users will be treating the RK1 less like a SoM and more like a miniature "blade server." This patch introduces a dtsi to enable most[1] of the SoM I/O, as well as a dts catered more directly to the "compute node" use case. [1] These peripherals are not addressed with this patch. Signed-off-by: Sam Edwards <CFSworks@gmail.com> Link: https://lore.kernel.org/r/20231011225823.2542262-4-CFSworks@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This commit is contained in:
parent
e30ecfcbe4
commit
2806a69f3f
@ -105,6 +105,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-nanopc-t6.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-orangepi-5-plus.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-quartzpro64.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-turing-rk1.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-indiedroid-nova.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-khadas-edge2.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-rock-5a.dtb
|
||||
|
21
arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dts
Normal file
21
arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dts
Normal file
@ -0,0 +1,21 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* This device tree covers the common case where the RK1 is used as a
|
||||
* "compute node" system, where the carrier board is functioning more like a
|
||||
* generic backplane (with no non-autoenumerable peripherals of its own) than
|
||||
* like a device that the SoM is meant to enable.
|
||||
*
|
||||
* Copyright (c) 2023 Sam Edwards <CFSworks@gmail.com>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "rk3588-turing-rk1.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Turing Machines RK1";
|
||||
compatible = "turing,rk1", "rockchip,rk3588";
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial9:115200n8";
|
||||
};
|
||||
};
|
614
arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi
Normal file
614
arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi
Normal file
@ -0,0 +1,614 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Device tree definitions for the Turing RK1 SoM.
|
||||
*
|
||||
* Copyright (c) 2023 Sam Edwards <CFSworks@gmail.com>
|
||||
*
|
||||
* Based on RK3588-EVB1 devicetree
|
||||
* Copyright (c) 2021 Rockchip Electronics Co., Ltd.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include "rk3588.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "turing,rk1", "rockchip,rk3588";
|
||||
|
||||
aliases {
|
||||
ethernet0 = &gmac1;
|
||||
mmc0 = &sdhci;
|
||||
serial2 = &uart2;
|
||||
serial9 = &uart9;
|
||||
};
|
||||
|
||||
fan: pwm-fan {
|
||||
compatible = "pwm-fan";
|
||||
cooling-levels = <0 25 95 145 195 255>;
|
||||
fan-supply = <&vcc5v0_sys>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm0m2_pins &fan_int>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>;
|
||||
pwms = <&pwm0 0 50000 0>;
|
||||
#cooling-cells = <2>;
|
||||
};
|
||||
|
||||
vcc3v3_pcie30: vcc3v3-pcie30-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_pcie30";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
enable-active-high;
|
||||
gpios = <&gpio2 RK_PC5 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc3v3_pcie30_en>;
|
||||
startup-delay-us = <5000>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: vcc5v0-sys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_1v1_nldo_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1100000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
};
|
||||
|
||||
&combphy2_psu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpu_b0 {
|
||||
cpu-supply = <&vdd_cpu_big0_s0>;
|
||||
};
|
||||
|
||||
&cpu_b1 {
|
||||
cpu-supply = <&vdd_cpu_big0_s0>;
|
||||
};
|
||||
|
||||
&cpu_b2 {
|
||||
cpu-supply = <&vdd_cpu_big1_s0>;
|
||||
};
|
||||
|
||||
&cpu_b3 {
|
||||
cpu-supply = <&vdd_cpu_big1_s0>;
|
||||
};
|
||||
|
||||
&cpu_l0 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_l1 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_l2 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_l3 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
clock_in_out = "output";
|
||||
phy-handle = <&rgmii_phy>;
|
||||
phy-mode = "rgmii-rxid";
|
||||
pinctrl-0 = <&gmac1_miim
|
||||
&gmac1_tx_bus2
|
||||
&gmac1_rx_bus2
|
||||
&gmac1_rgmii_clk
|
||||
&gmac1_rgmii_bus>;
|
||||
pinctrl-names = "default";
|
||||
rx_delay = <0x00>;
|
||||
tx_delay = <0x43>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0m2_xfer>;
|
||||
status = "okay";
|
||||
|
||||
vdd_cpu_big0_s0: regulator@42 {
|
||||
compatible = "rockchip,rk8602";
|
||||
reg = <0x42>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu_big0_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_big1_s0: regulator@43 {
|
||||
compatible = "rockchip,rk8603", "rockchip,rk8602";
|
||||
reg = <0x43>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu_big1_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c1m2_xfer>;
|
||||
status = "okay";
|
||||
|
||||
vdd_npu_s0: regulator@42 {
|
||||
compatible = "rockchip,rk8602";
|
||||
reg = <0x42>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_npu_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c6 {
|
||||
status = "okay";
|
||||
|
||||
hym8563: rtc@51 {
|
||||
compatible = "haoyu,hym8563";
|
||||
reg = <0x51>;
|
||||
#clock-cells = <0>;
|
||||
clock-output-names = "hym8563";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hym8563_int>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
&mdio1 {
|
||||
rgmii_phy: ethernet-phy@1 {
|
||||
/* RTL8211F */
|
||||
compatible = "ethernet-phy-id001c.c916",
|
||||
"ethernet-phy-ieee802.3-c22";
|
||||
reg = <0x1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rtl8211f_rst>;
|
||||
reset-assert-us = <15000>;
|
||||
reset-deassert-us = <50000>;
|
||||
reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
&pcie2x1l1 {
|
||||
linux,pci-domain = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie2_reset>;
|
||||
reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie30phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie3x4 {
|
||||
linux,pci-domain = <0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie3_reset>;
|
||||
reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc3v3_pcie30>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
fan {
|
||||
fan_int: fan-int {
|
||||
rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
hym8563 {
|
||||
hym8563_int: hym8563-int {
|
||||
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pcie2 {
|
||||
pcie2_reset: pcie2-reset {
|
||||
rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pcie3 {
|
||||
pcie3_reset: pcie3-reset {
|
||||
rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
vcc3v3_pcie30_en: pcie3-reg {
|
||||
rockchip,pins = <2 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
rtl8211f {
|
||||
rtl8211f_rst: rtl8211f-rst {
|
||||
rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
no-sdio;
|
||||
no-sd;
|
||||
non-removable;
|
||||
mmc-hs400-1_8v;
|
||||
mmc-hs400-enhanced-strobe;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi2 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
|
||||
num-cs = <1>;
|
||||
|
||||
pmic@0 {
|
||||
compatible = "rockchip,rk806";
|
||||
spi-max-frequency = <1000000>;
|
||||
reg = <0x0>;
|
||||
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
|
||||
<&rk806_dvs2_null>, <&rk806_dvs3_null>;
|
||||
|
||||
vcc1-supply = <&vcc5v0_sys>;
|
||||
vcc2-supply = <&vcc5v0_sys>;
|
||||
vcc3-supply = <&vcc5v0_sys>;
|
||||
vcc4-supply = <&vcc5v0_sys>;
|
||||
vcc5-supply = <&vcc5v0_sys>;
|
||||
vcc6-supply = <&vcc5v0_sys>;
|
||||
vcc7-supply = <&vcc5v0_sys>;
|
||||
vcc8-supply = <&vcc5v0_sys>;
|
||||
vcc9-supply = <&vcc5v0_sys>;
|
||||
vcc10-supply = <&vcc5v0_sys>;
|
||||
vcc11-supply = <&vcc_2v0_pldo_s3>;
|
||||
vcc12-supply = <&vcc5v0_sys>;
|
||||
vcc13-supply = <&vcc_1v1_nldo_s3>;
|
||||
vcc14-supply = <&vcc_1v1_nldo_s3>;
|
||||
vcca-supply = <&vcc5v0_sys>;
|
||||
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
rk806_dvs1_null: dvs1-null-pins {
|
||||
pins = "gpio_pwrctrl2";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
rk806_dvs2_null: dvs2-null-pins {
|
||||
pins = "gpio_pwrctrl2";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
rk806_dvs3_null: dvs3-null-pins {
|
||||
pins = "gpio_pwrctrl3";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
regulators {
|
||||
vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_gpu_s0";
|
||||
regulator-enable-ramp-delay = <400>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_cpu_lit_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_log_s0: dcdc-reg3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <675000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_log_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <750000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_vdenc_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_ddr_s0: dcdc-reg5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <675000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_ddr_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <850000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd2_ddr_s3: dcdc-reg6 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vdd2_ddr_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_2v0_pldo_s3: dcdc-reg7 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <2000000>;
|
||||
regulator-max-microvolt = <2000000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_2v0_pldo_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <2000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3_s3: dcdc-reg8 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc_3v3_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vddq_ddr_s0: dcdc-reg9 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vddq_ddr_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8_s3: dcdc-reg10 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc_1v8_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
avcc_1v8_s0: pldo-reg1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "avcc_1v8_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8_s0: pldo-reg2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc_1v8_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
avdd_1v2_s0: pldo-reg3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-name = "avdd_1v2_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3_s0: pldo-reg4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vcc_3v3_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd_s0: pldo-reg5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vccio_sd_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
pldo6_s3: pldo-reg6 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "pldo6_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v75_s3: nldo-reg1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-name = "vdd_0v75_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <750000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_ddr_pll_s0: nldo-reg2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <850000>;
|
||||
regulator-name = "vdd_ddr_pll_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <850000>;
|
||||
};
|
||||
};
|
||||
|
||||
avdd_0v75_s0: nldo-reg3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-name = "avdd_0v75_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v85_s0: nldo-reg4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <850000>;
|
||||
regulator-name = "vdd_0v85_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v75_s0: nldo-reg5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-name = "vdd_0v75_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-0 = <&uart2m0_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart9 {
|
||||
pinctrl-0 = <&uart9m0_xfer>;
|
||||
status = "okay";
|
||||
};
|
Loading…
x
Reference in New Issue
Block a user