iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

ARM: dts: qcom: sdx65: move status properties to end of nodes

Browse Source 
Move a few device tree "status" properties so that they are the last
specified property, in "qcom-sdx65-mtp.dts" and "qcom-sdx65.dtsi".
Note that properties must always be specified before sub-nodes.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230327195605.2854123-3-elder@linaro.org
This commit is contained in:
Alex Elder 2023-03-27 14:56:05 -05:00 committed by Bjorn Andersson
parent 14079448cc
commit 280ecc1912
2 changed files with 8 additions and 6 deletions

6
arch/arm/boot/dts/qcom-sdx65-mtp.dts

@ -270,8 +270,8 @@
};
&remoteproc_mpss {
status = "okay";
memory-region = <&mpss_adsp_mem>;
status = "okay";
};
&usb {
@ -283,14 +283,14 @@
};
&usb_hsphy {
status = "okay";
vdda-pll-supply = <&vreg_l4b_0p88>;
vdda33-supply = <&vreg_l10b_3p08>;
vdda18-supply = <&vreg_l5b_1p8>;
status = "okay";
};
&usb_qmpphy {
status = "okay";
vdda-phy-supply = <&vreg_l4b_0p88>;
vdda-pll-supply = <&vreg_l1b_1p2>;
status = "okay";
};

8
arch/arm/boot/dts/qcom-sdx65.dtsi

@ -224,16 +224,15 @@
"qcom,usb-snps-hs-7nm-phy";
reg = <0xff4000 0x120>;
#phy-cells = <0>;
status = "disabled";
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "ref";
resets = <&gcc GCC_QUSB2PHY_BCR>;
status = "disabled";
};
usb_qmpphy: phy@ff6000 {
compatible = "qcom,sdx65-qmp-usb3-uni-phy";
reg = <0x00ff6000 0x1c8>;
status = "disabled";
#address-cells = <1>;
#size-cells = <1>;
ranges;
@ -247,6 +246,8 @@
<&gcc GCC_USB3_PHY_BCR>;
reset-names = "phy", "common";
status = "disabled";
usb_ssphy: phy@ff6200 {
reg = <0x00ff6e00 0x160>,
<0x00ff7000 0x1ec>,
@ -394,7 +395,6 @@
usb: usb@a6f8800 {
compatible = "qcom,sdx65-dwc3", "qcom,dwc3";
reg = <0x0a6f8800 0x400>;
status = "disabled";
#address-cells = <1>;
#size-cells = <1>;
ranges;
@ -424,6 +424,8 @@
resets = <&gcc GCC_USB30_BCR>;
status = "disabled";
usb_dwc3: usb@a600000 {
compatible = "snps,dwc3";
reg = <0x0a600000 0xcd00>;