iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

phy: qcom-qmp-combo: Introduce orientation switching

Browse Source 
The data lanes of the QMP PHY is swapped in order to handle changing
orientation of the USB Type-C cable. Register a typec_switch device to
allow a TCPM to configure the orientation.

The newly introduced orientation variable is adjusted based on the
request, and the initialized components are brought down and up again.
To keep track of what parts needs to be cycled new variables to keep
track of the individual init_count is introduced.

Both the USB and the DisplayPort altmode signals are properly switched.
For DisplayPort the controller will after the TCPM having established
orientation power on the PHY, so this is not done implicitly, but for
USB the PHY typically is kept initialized across the switch, and must
therefore then be reinitialized.

This is based on initial work by Wesley Cheng.

Link: https://lore.kernel.org/r/20201009082843.28503-3-wcheng@codeaurora.org/
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Abel Vesa <abel.vesa@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on HDK8450
Tested-by: Johan Hovold <johan+linaro@kernel.org>	# X13s
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20230515032743.400170-6-quic_bjorande@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This commit is contained in:
Bjorn Andersson 2023-05-14 20:27:40 -07:00 committed by Vinod Koul
parent 815891eee6
commit 2851117f8f
2 changed files with 85 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
drivers/phy/qualcomm/Kconfig
View File

@ -59,6 +59,7 @@ if PHY_QCOM_QMP
config PHY_QCOM_QMP_COMBO
tristate "Qualcomm QMP Combo PHY Driver"
default PHY_QCOM_QMP
depends on TYPEC || TYPEC=n
select GENERIC_PHY
select MFD_SYSCON
help

93
drivers/phy/qualcomm/phy-qcom-qmp-combo.c
View File

@ -20,6 +20,7 @@
#include <linux/reset.h>
#include <linux/slab.h>
#include <linux/usb/typec.h>
#include <linux/usb/typec_mux.h>
#include <dt-bindings/phy/phy-qcom-qmp.h>
@ -1320,15 +1321,18 @@ struct qmp_combo {
struct phy *usb_phy;
enum phy_mode mode;
unsigned int usb_init_count;
struct phy *dp_phy;
unsigned int dp_aux_cfg;
struct phy_configure_opts_dp dp_opts;
unsigned int dp_init_count;
struct clk_fixed_rate pipe_clk_fixed;
struct clk_hw dp_link_hw;
struct clk_hw dp_pixel_hw;
struct typec_switch_dev *sw;
enum typec_orientation orientation;
};
@ -2467,14 +2471,14 @@ static int qmp_combo_dp_calibrate(struct phy *phy)
return ret;
}
static int qmp_combo_com_init(struct qmp_combo *qmp)
static int qmp_combo_com_init(struct qmp_combo *qmp, bool force)
{
const struct qmp_phy_cfg *cfg = qmp->cfg;
void __iomem *com = qmp->com;
int ret;
u32 val;
if (qmp->init_count++)
if (!force && qmp->init_count++)
return 0;
ret = regulator_bulk_enable(cfg->num_vregs, qmp->vregs);
@ -2536,11 +2540,11 @@ err_decrement_count:
return ret;
}
static int qmp_combo_com_exit(struct qmp_combo *qmp)
static int qmp_combo_com_exit(struct qmp_combo *qmp, bool force)
{
const struct qmp_phy_cfg *cfg = qmp->cfg;
if (--qmp->init_count)
if (!force && --qmp->init_count)
return 0;
reset_control_bulk_assert(cfg->num_resets, qmp->resets);
@ -2560,12 +2564,14 @@ static int qmp_combo_dp_init(struct phy *phy)
mutex_lock(&qmp->phy_mutex);
ret = qmp_combo_com_init(qmp);
ret = qmp_combo_com_init(qmp, false);
if (ret)
goto out_unlock;
cfg->dp_aux_init(qmp);
qmp->dp_init_count++;
out_unlock:
mutex_unlock(&qmp->phy_mutex);
return ret;
@ -2577,7 +2583,9 @@ static int qmp_combo_dp_exit(struct phy *phy)
mutex_lock(&qmp->phy_mutex);
qmp_combo_com_exit(qmp);
qmp_combo_com_exit(qmp, false);
qmp->dp_init_count--;
mutex_unlock(&qmp->phy_mutex);
@ -2706,16 +2714,18 @@ static int qmp_combo_usb_init(struct phy *phy)
int ret;
mutex_lock(&qmp->phy_mutex);
ret = qmp_combo_com_init(qmp);
ret = qmp_combo_com_init(qmp, false);
if (ret)
goto out_unlock;
ret = qmp_combo_usb_power_on(phy);
if (ret) {
qmp_combo_com_exit(qmp);
qmp_combo_com_exit(qmp, false);
goto out_unlock;
}
qmp->usb_init_count++;
out_unlock:
mutex_unlock(&qmp->phy_mutex);
return ret;
@ -2731,10 +2741,12 @@ static int qmp_combo_usb_exit(struct phy *phy)
if (ret)
goto out_unlock;
ret = qmp_combo_com_exit(qmp);
ret = qmp_combo_com_exit(qmp, false);
if (ret)
goto out_unlock;
qmp->usb_init_count--;
out_unlock:
mutex_unlock(&qmp->phy_mutex);
return ret;
@ -3203,6 +3215,65 @@ static int qmp_combo_register_clocks(struct qmp_combo *qmp, struct device_node *
return devm_add_action_or_reset(qmp->dev, phy_clk_release_provider, dp_np);
}
#if IS_ENABLED(CONFIG_TYPEC)
static int qmp_combo_typec_switch_set(struct typec_switch_dev *sw,
enum typec_orientation orientation)
{
struct qmp_combo *qmp = typec_switch_get_drvdata(sw);
const struct qmp_phy_cfg *cfg = qmp->cfg;
if (orientation == qmp->orientation || orientation == TYPEC_ORIENTATION_NONE)
return 0;
mutex_lock(&qmp->phy_mutex);
qmp->orientation = orientation;
if (qmp->init_count) {
if (qmp->usb_init_count)
qmp_combo_usb_power_off(qmp->usb_phy);
qmp_combo_com_exit(qmp, true);
qmp_combo_com_init(qmp, true);
if (qmp->usb_init_count)
qmp_combo_usb_power_on(qmp->usb_phy);
if (qmp->dp_init_count)
cfg->dp_aux_init(qmp);
}
mutex_unlock(&qmp->phy_mutex);
return 0;
}
static void qmp_combo_typec_unregister(void *data)
{
struct qmp_combo *qmp = data;
typec_switch_unregister(qmp->sw);
}
static int qmp_combo_typec_switch_register(struct qmp_combo *qmp)
{
struct typec_switch_desc sw_desc = {};
struct device *dev = qmp->dev;
sw_desc.drvdata = qmp;
sw_desc.fwnode = dev->fwnode;
sw_desc.set = qmp_combo_typec_switch_set;
qmp->sw = typec_switch_register(dev, &sw_desc);
if (IS_ERR(qmp->sw)) {
dev_err(dev, "Unable to register typec switch: %pe\n", qmp->sw);
return PTR_ERR(qmp->sw);
}
return devm_add_action_or_reset(dev, qmp_combo_typec_unregister, qmp);
}
#else
static int qmp_combo_typec_switch_register(struct qmp_combo *qmp)
{
return 0;
}
#endif
static int qmp_combo_parse_dt_lecacy_dp(struct qmp_combo *qmp, struct device_node *np)
{
struct device *dev = qmp->dev;
@ -3403,6 +3474,10 @@ static int qmp_combo_probe(struct platform_device *pdev)
if (ret)
return ret;
ret = qmp_combo_typec_switch_register(qmp);
if (ret)
return ret;
/* Check for legacy binding with child nodes. */
usb_np = of_get_child_by_name(dev->of_node, "usb3-phy");
if (usb_np) {