Merge branch 'irq/urgent' into irq/core

Reason: Get mainline fixes integrated. Further patches conflict with
        them

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

.mailmap

@@ -23,6 +23,7 @@ Andy Adamson <andros@citi.umich.edu>
 Arnaud Patard <arnaud.patard@rtp-net.org>
 Arnd Bergmann <arnd@arndb.de>
 Axel Dyks <xl@xlsigned.net>
+Axel Lin <axel.lin@gmail.com>
 Ben Gardner <bgardner@wabtec.com>
 Ben M Cahill <ben.m.cahill@intel.com>
 Björn Steinbrink <B.Steinbrink@gmx.de>

Documentation/ABI/testing/sysfs-platform-at91

@@ -0,0 +1,25 @@
+What:		/sys/devices/platform/at91_can/net/<iface>/mb0_id
+Date:		January 2011
+KernelVersion:	2.6.38
+Contact:	Marc Kleine-Budde <kernel@pengutronix.de>
+Description:
+		Value representing the can_id of mailbox 0.
+
+		Default: 0x7ff (standard frame)
+
+		Due to a chip bug (errata 50.2.6.3 & 50.3.5.3 in
+		"AT91SAM9263 Preliminary 6249H-ATARM-27-Jul-09") the
+		contents of mailbox 0 may be send under certain
+		conditions (even if disabled or in rx mode).
+
+		The workaround in the errata suggests not to use the
+		mailbox and load it with an unused identifier.
+
+		In order to use an extended can_id add the
+		CAN_EFF_FLAG (0x80000000U) to the can_id. Example:
+
+		- standard id 0x7ff:
+		echo 0x7ff      > /sys/class/net/can0/mb0_id
+
+		- extended id 0x1fffffff:
+		echo 0x9fffffff > /sys/class/net/can0/mb0_id

Documentation/DocBook/device-drivers.tmpl

@@ -217,8 +217,8 @@ X!Isound/sound_firmware.c
   <chapter id="uart16x50">
      <title>16x50 UART Driver</title>
 !Iinclude/linux/serial_core.h
-!Edrivers/serial/serial_core.c
+!Edrivers/tty/serial/serial_core.c
-!Edrivers/serial/8250.c
+!Edrivers/tty/serial/8250.c
   </chapter>
 
   <chapter id="fbdev">

Documentation/feature-removal-schedule.txt

@@ -603,3 +603,19 @@ Why:	The adm9240, w83792d and w83793 hardware monitoring drivers have
 Who:	Jean Delvare <khali@linux-fr.org>
 
 ----------------------------
+
+What:	noswapaccount kernel command line parameter
+When:	2.6.40
+Why:	The original implementation of memsw feature enabled by
+	CONFIG_CGROUP_MEM_RES_CTLR_SWAP could be disabled by the noswapaccount
+	kernel parameter (introduced in 2.6.29-rc1). Later on, this decision
+	turned out to be not ideal because we cannot have the feature compiled
+	in and disabled by default and let only interested to enable it
+	(e.g. general distribution kernels might need it). Therefore we have
+	added swapaccount[=0|1] parameter (introduced in 2.6.37) which provides
+	the both possibilities. If we remove noswapaccount we will have
+	less command line parameters with the same functionality and we
+	can also cleanup the parameter handling a bit ().
+Who:	Michal Hocko <mhocko@suse.cz>
+
+----------------------------

Documentation/filesystems/ntfs.txt

@@ -460,6 +460,8 @@ Note, a technical ChangeLog aimed at kernel hackers is in fs/ntfs/ChangeLog.
 2.1.30:
 	- Fix writev() (it kept writing the first segment over and over again
 	  instead of moving onto subsequent segments).
+	- Fix crash in ntfs_mft_record_alloc() when mapping the new extent mft
+	  record failed.
 2.1.29:
 	- Fix a deadlock when mounting read-write.
 2.1.28:

Documentation/kernel-parameters.txt

@@ -43,11 +43,11 @@ parameter is applicable:
 	AVR32	AVR32 architecture is enabled.
 	AX25	Appropriate AX.25 support is enabled.
 	BLACKFIN Blackfin architecture is enabled.
+	DRM	Direct Rendering Management support is enabled.
+	DYNAMIC_DEBUG Build in debug messages and enable them at runtime
 	EDD	BIOS Enhanced Disk Drive Services (EDD) is enabled
 	EFI	EFI Partitioning (GPT) is enabled
 	EIDE	EIDE/ATAPI support is enabled.
-	DRM	Direct Rendering Management support is enabled.
-	DYNAMIC_DEBUG Build in debug messages and enable them at runtime
 	FB	The frame buffer device is enabled.
 	GCOV	GCOV profiling is enabled.
 	HW	Appropriate hardware is enabled.

Documentation/networking/bonding.txt

@@ -49,7 +49,8 @@ Table of Contents
 3.3	Configuring Bonding Manually with Ifenslave
 3.3.1		Configuring Multiple Bonds Manually
 3.4	Configuring Bonding Manually via Sysfs
-3.5	Overriding Configuration for Special Cases
+3.5	Configuration with Interfaces Support
+3.6	Overriding Configuration for Special Cases
 
 4. Querying Bonding Configuration
 4.1	Bonding Configuration
@@ -161,8 +162,8 @@ onwards) do not have /usr/include/linux symbolically linked to the
 default kernel source include directory.
 
 SECOND IMPORTANT NOTE:
-	If you plan to configure bonding using sysfs, you do not need
+	If you plan to configure bonding using sysfs or using the
-to use ifenslave.
+/etc/network/interfaces file, you do not need to use ifenslave.
 
 2. Bonding Driver Options
 =========================
@@ -779,22 +780,26 @@ resend_igmp
 
 	You can configure bonding using either your distro's network
 initialization scripts, or manually using either ifenslave or the
-sysfs interface.  Distros generally use one of two packages for the
+sysfs interface.  Distros generally use one of three packages for the
-network initialization scripts: initscripts or sysconfig.  Recent
+network initialization scripts: initscripts, sysconfig or interfaces.
-versions of these packages have support for bonding, while older
+Recent versions of these packages have support for bonding, while older
 versions do not.
 
 	We will first describe the options for configuring bonding for
-distros using versions of initscripts and sysconfig with full or
+distros using versions of initscripts, sysconfig and interfaces with full
-partial support for bonding, then provide information on enabling
+or partial support for bonding, then provide information on enabling
 bonding without support from the network initialization scripts (i.e.,
 older versions of initscripts or sysconfig).
 
-	If you're unsure whether your distro uses sysconfig or
+	If you're unsure whether your distro uses sysconfig,
-initscripts, or don't know if it's new enough, have no fear.
+initscripts or interfaces, or don't know if it's new enough, have no fear.
 Determining this is fairly straightforward.
 
-	First, issue the command:
+	First, look for a file called interfaces in /etc/network directory.
+If this file is present in your system, then your system use interfaces. See
+Configuration with Interfaces Support.
+
+	Else, issue the command:
 
 $ rpm -qf /sbin/ifup
 
@@ -1327,8 +1332,62 @@ echo 2000 > /sys/class/net/bond1/bonding/arp_interval
 echo +eth2 > /sys/class/net/bond1/bonding/slaves
 echo +eth3 > /sys/class/net/bond1/bonding/slaves
 
-3.5 Overriding Configuration for Special Cases
+3.5 Configuration with Interfaces Support
+-----------------------------------------
+
+        This section applies to distros which use /etc/network/interfaces file
+to describe network interface configuration, most notably Debian and it's
+derivatives.
+
+	The ifup and ifdown commands on Debian don't support bonding out of
+the box. The ifenslave-2.6 package should be installed to provide bonding
+support.  Once installed, this package will provide bond-* options to be used
+into /etc/network/interfaces.
+
+	Note that ifenslave-2.6 package will load the bonding module and use
+the ifenslave command when appropriate.
+
+Example Configurations
+----------------------
+
+In /etc/network/interfaces, the following stanza will configure bond0, in
+active-backup mode, with eth0 and eth1 as slaves.
+
+auto bond0
+iface bond0 inet dhcp
+	bond-slaves eth0 eth1
+	bond-mode active-backup
+	bond-miimon 100
+	bond-primary eth0 eth1
+
+If the above configuration doesn't work, you might have a system using
+upstart for system startup. This is most notably true for recent
+Ubuntu versions. The following stanza in /etc/network/interfaces will
+produce the same result on those systems.
+
+auto bond0
+iface bond0 inet dhcp
+	bond-slaves none
+	bond-mode active-backup
+	bond-miimon 100
+
+auto eth0
+iface eth0 inet manual
+	bond-master bond0
+	bond-primary eth0 eth1
+
+auto eth1
+iface eth1 inet manual
+	bond-master bond0
+	bond-primary eth0 eth1
+
+For a full list of bond-* supported options in /etc/network/interfaces and some
+more advanced examples tailored to you particular distros, see the files in
+/usr/share/doc/ifenslave-2.6.
+
+3.6 Overriding Configuration for Special Cases
 ----------------------------------------------
+
 When using the bonding driver, the physical port which transmits a frame is
 typically selected by the bonding driver, and is not relevant to the user or
 system administrator.  The output port is simply selected using the policies of

Documentation/networking/ip-sysctl.txt

@@ -187,7 +187,7 @@ tcp_cookie_size - INTEGER
 tcp_dsack - BOOLEAN
 	Allows TCP to send "duplicate" SACKs.
 
-tcp_ecn - BOOLEAN
+tcp_ecn - INTEGER
 	Enable Explicit Congestion Notification (ECN) in TCP. ECN is only
 	used when both ends of the TCP flow support it. It is useful to
 	avoid losses due to congestion (when the bottleneck router supports

Documentation/scheduler/sched-stats.txt

@@ -1,3 +1,7 @@
+Version 15 of schedstats dropped counters for some sched_yield:
+yld_exp_empty, yld_act_empty and yld_both_empty. Otherwise, it is
+identical to version 14.
+
 Version 14 of schedstats includes support for sched_domains, which hit the
 mainline kernel in 2.6.20 although it is identical to the stats from version
 12 which was in the kernel from 2.6.13-2.6.19 (version 13 never saw a kernel
@@ -28,32 +32,25 @@ to write their own scripts, the fields are described here.
 
 CPU statistics
 --------------
-cpu<N> 1 2 3 4 5 6 7 8 9 10 11 12
+cpu<N> 1 2 3 4 5 6 7 8 9
 
-NOTE: In the sched_yield() statistics, the active queue is considered empty
+First field is a sched_yield() statistic:
-    if it has only one process in it, since obviously the process calling
+     1) # of times sched_yield() was called
-    sched_yield() is that process.
-
-First four fields are sched_yield() statistics:
-     1) # of times both the active and the expired queue were empty
-     2) # of times just the active queue was empty
-     3) # of times just the expired queue was empty
-     4) # of times sched_yield() was called
 
 Next three are schedule() statistics:
-     5) # of times we switched to the expired queue and reused it
+     2) # of times we switched to the expired queue and reused it
-     6) # of times schedule() was called
+     3) # of times schedule() was called
-     7) # of times schedule() left the processor idle
+     4) # of times schedule() left the processor idle
 
 Next two are try_to_wake_up() statistics:
-     8) # of times try_to_wake_up() was called
+     5) # of times try_to_wake_up() was called
-     9) # of times try_to_wake_up() was called to wake up the local cpu
+     6) # of times try_to_wake_up() was called to wake up the local cpu
 
 Next three are statistics describing scheduling latency:
-    10) sum of all time spent running by tasks on this processor (in jiffies)
+     7) sum of all time spent running by tasks on this processor (in jiffies)
-    11) sum of all time spent waiting to run by tasks on this processor (in
+     8) sum of all time spent waiting to run by tasks on this processor (in
         jiffies)
-    12) # of timeslices run on this cpu
+     9) # of timeslices run on this cpu
 
 
 Domain statistics

MAINTAINERS

@@ -978,6 +978,8 @@ S:	Maintained
 F:	arch/arm/plat-samsung/
 F:	arch/arm/plat-s3c24xx/
 F:	arch/arm/plat-s5p/
+F:	drivers/*/*s3c2410*
+F:	drivers/*/*/*s3c2410*
 
 ARM/S3C2410 ARM ARCHITECTURE
 M:	Ben Dooks <ben-linux@fluff.org>
@@ -3139,6 +3141,12 @@ S:	Maintained
 F:	net/ieee802154/
 F:	drivers/ieee802154/
 
+IKANOS/ADI EAGLE ADSL USB DRIVER
+M:	Matthieu Castet <castet.matthieu@free.fr>
+M:	Stanislaw Gruszka <stf_xl@wp.pl>
+S:	Maintained
+F:	drivers/usb/atm/ueagle-atm.c
+
 INTEGRITY MEASUREMENT ARCHITECTURE (IMA)
 M:	Mimi Zohar <zohar@us.ibm.com>
 S:	Supported
@@ -3327,7 +3335,6 @@ F:	drivers/net/wimax/i2400m/
 F:	include/linux/wimax/i2400m.h
 
 INTEL WIRELESS WIFI LINK (iwlwifi)
-M:	Reinette Chatre <reinette.chatre@intel.com>
 M:	Wey-Yi Guy <wey-yi.w.guy@intel.com>
 M:	Intel Linux Wireless <ilw@linux.intel.com>
 L:	linux-wireless@vger.kernel.org
@@ -3674,6 +3681,28 @@ F:	include/linux/key-type.h
 F:	include/keys/
 F:	security/keys/
 
+KEYS-TRUSTED
+M:	David Safford <safford@watson.ibm.com>
+M:	Mimi Zohar <zohar@us.ibm.com>
+L:	linux-security-module@vger.kernel.org
+L:	keyrings@linux-nfs.org
+S:	Supported
+F:	Documentation/keys-trusted-encrypted.txt
+F:	include/keys/trusted-type.h
+F:	security/keys/trusted.c
+F:	security/keys/trusted.h
+
+KEYS-ENCRYPTED
+M:	Mimi Zohar <zohar@us.ibm.com>
+M:	David Safford <safford@watson.ibm.com>
+L:	linux-security-module@vger.kernel.org
+L:	keyrings@linux-nfs.org
+S:	Supported
+F:	Documentation/keys-trusted-encrypted.txt
+F:	include/keys/encrypted-type.h
+F:	security/keys/encrypted.c
+F:	security/keys/encrypted.h
+
 KGDB / KDB /debug_core
 M:	Jason Wessel <jason.wessel@windriver.com>
 W:	http://kgdb.wiki.kernel.org/
@@ -5522,12 +5551,11 @@ S:	Supported
 F:	drivers/scsi/be2iscsi/
 
 SERVER ENGINES 10Gbps NIC - BladeEngine 2 DRIVER
-M:	Sathya Perla <sathyap@serverengines.com>
+M:	Sathya Perla <sathya.perla@emulex.com>
-M:	Subbu Seetharaman <subbus@serverengines.com>
+M:	Subbu Seetharaman <subbu.seetharaman@emulex.com>
-M:	Sarveshwar Bandi <sarveshwarb@serverengines.com>
+M:	Ajit Khaparde <ajit.khaparde@emulex.com>
-M:	Ajit Khaparde <ajitk@serverengines.com>
 L:	netdev@vger.kernel.org
-W:	http://www.serverengines.com
+W:	http://www.emulex.com
 S:	Supported
 F:	drivers/net/benet/
 
@@ -5587,18 +5615,20 @@ F:	include/linux/sfi*.h
 
 SIMTEC EB110ATX (Chalice CATS)
 P:	Ben Dooks
-M:	Vincent Sanders <support@simtec.co.uk>
+P:	Vincent Sanders <vince@simtec.co.uk>
+M:	Simtec Linux Team <linux@simtec.co.uk>
 W:	http://www.simtec.co.uk/products/EB110ATX/
 S:	Supported
 
 SIMTEC EB2410ITX (BAST)
 P:	Ben Dooks
-M:	Vincent Sanders <support@simtec.co.uk>
+P:	Vincent Sanders <vince@simtec.co.uk>
+M:	Simtec Linux Team <linux@simtec.co.uk>
 W:	http://www.simtec.co.uk/products/EB2410ITX/
 S:	Supported
-F:	arch/arm/mach-s3c2410/
+F:	arch/arm/mach-s3c2410/mach-bast.c
-F:	drivers/*/*s3c2410*
+F:	arch/arm/mach-s3c2410/bast-ide.c
-F:	drivers/*/*/*s3c2410*
+F:	arch/arm/mach-s3c2410/bast-irq.c
 
 TI DAVINCI MACHINE SUPPORT
 M:	Kevin Hilman <khilman@deeprootsystems.com>
@@ -6573,6 +6603,16 @@ S:	Maintained
 F:	drivers/char/virtio_console.c
 F:	include/linux/virtio_console.h
 
+VIRTIO CORE, NET AND BLOCK DRIVERS
+M:	Rusty Russell <rusty@rustcorp.com.au>
+M:	"Michael S. Tsirkin" <mst@redhat.com>
+L:	virtualization@lists.linux-foundation.org
+S:	Maintained
+F:	drivers/virtio/
+F:	drivers/net/virtio_net.c
+F:	drivers/block/virtio_blk.c
+F:	include/linux/virtio_*.h
+
 VIRTIO HOST (VHOST)
 M:	"Michael S. Tsirkin" <mst@redhat.com>
 L:	kvm@vger.kernel.org
@@ -6746,12 +6786,12 @@ S:	Maintained
 F:	drivers/net/wireless/wl1251/*
 
 WL1271 WIRELESS DRIVER
-M:	Luciano Coelho <luciano.coelho@nokia.com>
+M:	Luciano Coelho <coelho@ti.com>
 L:	linux-wireless@vger.kernel.org
-W:	http://wireless.kernel.org
+W:	http://wireless.kernel.org/en/users/Drivers/wl12xx
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/luca/wl12xx.git
 S:	Maintained
-F:	drivers/net/wireless/wl12xx/wl1271*
+F:	drivers/net/wireless/wl12xx/
 F:	include/linux/wl12xx.h
 
 WL3501 WIRELESS PCMCIA CARD DRIVER

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 38
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc3
 NAME = Flesh-Eating Bats with Fangs
 
 # *DOCUMENTATION*

arch/arm/include/asm/hardware/sp810.h

@@ -50,6 +50,12 @@
 #define SCPCELLID2		0xFF8
 #define SCPCELLID3		0xFFC
 
+#define SCCTRL_TIMEREN0SEL_REFCLK	(0 << 15)
+#define SCCTRL_TIMEREN0SEL_TIMCLK	(1 << 15)
+
+#define SCCTRL_TIMEREN1SEL_REFCLK	(0 << 17)
+#define SCCTRL_TIMEREN1SEL_TIMCLK	(1 << 17)
+
 static inline void sysctl_soft_reset(void __iomem *base)
 {
 	/* writing any value to SCSYSSTAT reg will reset system */

arch/arm/include/asm/io.h

@@ -95,6 +95,15 @@ static inline void __iomem *__typesafe_io(unsigned long addr)
 	return (void __iomem *)addr;
 }
 
+/* IO barriers */
+#ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE
+#define __iormb()		rmb()
+#define __iowmb()		wmb()
+#else
+#define __iormb()		do { } while (0)
+#define __iowmb()		do { } while (0)
+#endif
+
 /*
  * Now, pick up the machine-defined IO definitions
  */
@@ -125,17 +134,17 @@ static inline void __iomem *__typesafe_io(unsigned long addr)
  * The {in,out}[bwl] macros are for emulating x86-style PCI/ISA IO space.
  */
 #ifdef __io
-#define outb(v,p)		__raw_writeb(v,__io(p))
+#define outb(v,p)	({ __iowmb(); __raw_writeb(v,__io(p)); })
-#define outw(v,p)		__raw_writew((__force __u16) \
+#define outw(v,p)	({ __iowmb(); __raw_writew((__force __u16) \
-					cpu_to_le16(v),__io(p))
+					cpu_to_le16(v),__io(p)); })
-#define outl(v,p)		__raw_writel((__force __u32) \
+#define outl(v,p)	({ __iowmb(); __raw_writel((__force __u32) \
-					cpu_to_le32(v),__io(p))
+					cpu_to_le32(v),__io(p)); })
 
-#define inb(p)	({ __u8 __v = __raw_readb(__io(p)); __v; })
+#define inb(p)	({ __u8 __v = __raw_readb(__io(p)); __iormb(); __v; })
 #define inw(p)	({ __u16 __v = le16_to_cpu((__force __le16) \
-			__raw_readw(__io(p))); __v; })
+			__raw_readw(__io(p))); __iormb(); __v; })
 #define inl(p)	({ __u32 __v = le32_to_cpu((__force __le32) \
-			__raw_readl(__io(p))); __v; })
+			__raw_readl(__io(p))); __iormb(); __v; })
 
 #define outsb(p,d,l)		__raw_writesb(__io(p),d,l)
 #define outsw(p,d,l)		__raw_writesw(__io(p),d,l)
@@ -192,14 +201,6 @@ extern void _memset_io(volatile void __iomem *, int, size_t);
 #define writel_relaxed(v,c)	((void)__raw_writel((__force u32) \
 					cpu_to_le32(v),__mem_pci(c)))
 
-#ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE
-#define __iormb()		rmb()
-#define __iowmb()		wmb()
-#else
-#define __iormb()		do { } while (0)
-#define __iowmb()		do { } while (0)
-#endif
-
 #define readb(c)		({ u8  __v = readb_relaxed(c); __iormb(); __v; })
 #define readw(c)		({ u16 __v = readw_relaxed(c); __iormb(); __v; })
 #define readl(c)		({ u32 __v = readl_relaxed(c); __iormb(); __v; })

arch/arm/include/asm/memory.h

@@ -188,7 +188,7 @@
  * translation for translating DMA addresses.  Use the driver
  * DMA support - see dma-mapping.h.
  */
-static inline unsigned long virt_to_phys(void *x)
+static inline unsigned long virt_to_phys(const volatile void *x)
 {
 	return __virt_to_phys((unsigned long)(x));
 }

arch/arm/kernel/head.S

@@ -392,24 +392,22 @@ ENDPROC(__turn_mmu_on)
 
 #ifdef CONFIG_SMP_ON_UP
 __fixup_smp:
-	mov	r4, #0x00070000
+	and	r3, r9, #0x000f0000	@ architecture version
-	orr	r3, r4, #0xff000000	@ mask 0xff070000
+	teq	r3, #0x000f0000		@ CPU ID supported?
-	orr	r4, r4, #0x41000000	@ val 0x41070000
-	and	r0, r9, r3
-	teq	r0, r4			@ ARM CPU and ARMv6/v7?
 	bne	__fixup_smp_on_up	@ no, assume UP
 
-	orr	r3, r3, #0x0000ff00
+	bic	r3, r9, #0x00ff0000
-	orr	r3, r3, #0x000000f0	@ mask 0xff07fff0
+	bic	r3, r3, #0x0000000f	@ mask 0xff00fff0
+	mov	r4, #0x41000000
 	orr	r4, r4, #0x0000b000
-	orr	r4, r4, #0x00000020	@ val 0x4107b020
+	orr	r4, r4, #0x00000020	@ val 0x4100b020
-	and	r0, r9, r3
+	teq	r3, r4			@ ARM 11MPCore?
-	teq	r0, r4			@ ARM 11MPCore?
 	moveq	pc, lr			@ yes, assume SMP
 
 	mrc	p15, 0, r0, c0, c0, 5	@ read MPIDR
-	tst	r0, #1 << 31
+	and	r0, r0, #0xc0000000	@ multiprocessing extensions and
-	movne	pc, lr			@ bit 31 => SMP
+	teq	r0, #0x80000000		@ not part of a uniprocessor system?
+	moveq	pc, lr			@ yes, assume SMP
 
 __fixup_smp_on_up:
 	adr	r0, 1f

arch/arm/kernel/smp_twd.c

@@ -36,6 +36,7 @@ static void twd_set_mode(enum clock_event_mode mode,
 		/* timer load already set up */
 		ctrl = TWD_TIMER_CONTROL_ENABLE | TWD_TIMER_CONTROL_IT_ENABLE
 			| TWD_TIMER_CONTROL_PERIODIC;
+		__raw_writel(twd_timer_rate / HZ, twd_base + TWD_TIMER_LOAD);
 		break;
 	case CLOCK_EVT_MODE_ONESHOT:
 		/* period set, and timer enabled in 'next_event' hook */
@@ -81,7 +82,7 @@ int twd_timer_ack(void)
 
 static void __cpuinit twd_calibrate_rate(void)
 {
-	unsigned long load, count;
+	unsigned long count;
 	u64 waitjiffies;
 
 	/*
@@ -116,10 +117,6 @@ static void __cpuinit twd_calibrate_rate(void)
 		printk("%lu.%02luMHz.\n", twd_timer_rate / 1000000,
 			(twd_timer_rate / 1000000) % 100);
 	}
-
-	load = twd_timer_rate / HZ;
-
-	__raw_writel(load, twd_base + TWD_TIMER_LOAD);
 }
 
 /*

arch/arm/mach-ep93xx/gpio.c

@@ -427,6 +427,13 @@ void __init ep93xx_gpio_init(void)
 {
 	int i;
 
+	/* Set Ports C, D, E, G, and H for GPIO use */
+	ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS |
+				 EP93XX_SYSCON_DEVCFG_GONK |
+				 EP93XX_SYSCON_DEVCFG_EONIDE |
+				 EP93XX_SYSCON_DEVCFG_GONIDE |
+				 EP93XX_SYSCON_DEVCFG_HONIDE);
+
 	for (i = 0; i < ARRAY_SIZE(ep93xx_gpio_banks); i++)
 		gpiochip_add(&ep93xx_gpio_banks[i].chip);
 }

arch/arm/mach-footbridge/include/mach/debug-macro.S

@@ -17,8 +17,8 @@
 	/* For NetWinder debugging */
 		.macro	addruart, rp, rv
 		mov	\rp, #0x000003f8
-		orr	\rv, \rp, #0x7c000000	@ physical
+		orr	\rv, \rp, #0xff000000	@ virtual
-		orr	\rp, \rp, #0xff000000	@ virtual
+		orr	\rp, \rp, #0x7c000000	@ physical
 		.endm
 
 #define UART_SHIFT	0

arch/arm/mach-omap1/Kconfig

@@ -9,6 +9,7 @@ config ARCH_OMAP730
 	depends on ARCH_OMAP1
 	bool "OMAP730 Based System"
 	select CPU_ARM926T
+	select OMAP_MPU_TIMER
 	select ARCH_OMAP_OTG
 
 config ARCH_OMAP850
@@ -22,6 +23,7 @@ config ARCH_OMAP15XX
 	default y
 	bool "OMAP15xx Based System"
 	select CPU_ARM925T
+	select OMAP_MPU_TIMER
 
 config ARCH_OMAP16XX
 	depends on ARCH_OMAP1

arch/arm/mach-omap1/Makefile

@@ -3,12 +3,11 @@
 #
 
 # Common support
-obj-y := io.o id.o sram.o irq.o mux.o flash.o serial.o devices.o dma.o
+obj-y := io.o id.o sram.o time.o irq.o mux.o flash.o serial.o devices.o dma.o
 obj-y += clock.o clock_data.o opp_data.o
 
 obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
 
-obj-$(CONFIG_OMAP_MPU_TIMER)	+= time.o
 obj-$(CONFIG_OMAP_32K_TIMER)	+= timer32k.o
 
 # Power Management

arch/arm/mach-omap1/include/mach/entry-macro.S

@@ -14,19 +14,6 @@
 #include <mach/irqs.h>
 #include <asm/hardware/gic.h>
 
-/*
- * We use __glue to avoid errors with multiple definitions of
- * .globl omap_irq_flags as it's included from entry-armv.S but not
- * from entry-common.S.
- */
-#ifdef __glue
-		.pushsection .data
-		.globl	omap_irq_flags
-omap_irq_flags:
-		.word	0
-		.popsection
-#endif
-
  		.macro	disable_fiq
 		.endm
 

arch/arm/mach-omap1/irq.c

@@ -57,6 +57,7 @@ struct omap_irq_bank {
 	unsigned long wake_enable;
 };
 
+u32 omap_irq_flags;
 static unsigned int irq_bank_count;
 static struct omap_irq_bank *irq_banks;
 
@@ -176,7 +177,6 @@ static struct irq_chip omap_irq_chip = {
 
 void __init omap_init_irq(void)
 {
-	extern unsigned int omap_irq_flags;
 	int i, j;
 
 #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)

arch/arm/mach-omap1/time.c

@@ -44,16 +44,21 @@
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
 #include <linux/io.h>
+#include <linux/sched.h>
 
 #include <asm/system.h>
 #include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/irq.h>
+#include <asm/sched_clock.h>
+
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 
 #include <plat/common.h>
 
+#ifdef CONFIG_OMAP_MPU_TIMER
+
 #define OMAP_MPU_TIMER_BASE		OMAP_MPU_TIMER1_BASE
 #define OMAP_MPU_TIMER_OFFSET		0x100
 
@@ -67,7 +72,7 @@ typedef struct {
 ((volatile omap_mpu_timer_regs_t*)OMAP1_IO_ADDRESS(OMAP_MPU_TIMER_BASE +	\
 				 (n)*OMAP_MPU_TIMER_OFFSET))
 
-static inline unsigned long omap_mpu_timer_read(int nr)
+static inline unsigned long notrace omap_mpu_timer_read(int nr)
 {
 	volatile omap_mpu_timer_regs_t* timer = omap_mpu_timer_base(nr);
 	return timer->read_tim;
@@ -212,6 +217,32 @@ static struct clocksource clocksource_mpu = {
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
+static DEFINE_CLOCK_DATA(cd);
+
+static inline unsigned long long notrace _omap_mpu_sched_clock(void)
+{
+	u32 cyc = mpu_read(&clocksource_mpu);
+	return cyc_to_sched_clock(&cd, cyc, (u32)~0);
+}
+
+#ifndef CONFIG_OMAP_32K_TIMER
+unsigned long long notrace sched_clock(void)
+{
+	return _omap_mpu_sched_clock();
+}
+#else
+static unsigned long long notrace omap_mpu_sched_clock(void)
+{
+	return _omap_mpu_sched_clock();
+}
+#endif
+
+static void notrace mpu_update_sched_clock(void)
+{
+	u32 cyc = mpu_read(&clocksource_mpu);
+	update_sched_clock(&cd, cyc, (u32)~0);
+}
+
 static void __init omap_init_clocksource(unsigned long rate)
 {
 	static char err[] __initdata = KERN_ERR
@@ -219,17 +250,13 @@ static void __init omap_init_clocksource(unsigned long rate)
 
 	setup_irq(INT_TIMER2, &omap_mpu_timer2_irq);
 	omap_mpu_timer_start(1, ~0, 1);
+	init_sched_clock(&cd, mpu_update_sched_clock, 32, rate);
 
 	if (clocksource_register_hz(&clocksource_mpu, rate))
 		printk(err, clocksource_mpu.name);
 }
 
-/*
+static void __init omap_mpu_timer_init(void)
- * ---------------------------------------------------------------------------
- * Timer initialization
- * ---------------------------------------------------------------------------
- */
-static void __init omap_timer_init(void)
 {
 	struct clk	*ck_ref = clk_get(NULL, "ck_ref");
 	unsigned long	rate;
@@ -246,6 +273,66 @@ static void __init omap_timer_init(void)
 	omap_init_clocksource(rate);
 }
 
+#else
+static inline void omap_mpu_timer_init(void)
+{
+	pr_err("Bogus timer, should not happen\n");
+}
+#endif	/* CONFIG_OMAP_MPU_TIMER */
+
+#if defined(CONFIG_OMAP_MPU_TIMER) && defined(CONFIG_OMAP_32K_TIMER)
+static unsigned long long (*preferred_sched_clock)(void);
+
+unsigned long long notrace sched_clock(void)
+{
+	if (!preferred_sched_clock)
+		return 0;
+
+	return preferred_sched_clock();
+}
+
+static inline void preferred_sched_clock_init(bool use_32k_sched_clock)
+{
+	if (use_32k_sched_clock)
+		preferred_sched_clock = omap_32k_sched_clock;
+	else
+		preferred_sched_clock = omap_mpu_sched_clock;
+}
+#else
+static inline void preferred_sched_clock_init(bool use_32k_sched_clcok)
+{
+}
+#endif
+
+static inline int omap_32k_timer_usable(void)
+{
+	int res = false;
+
+	if (cpu_is_omap730() || cpu_is_omap15xx())
+		return res;
+
+#ifdef CONFIG_OMAP_32K_TIMER
+	res = omap_32k_timer_init();
+#endif
+
+	return res;
+}
+
+/*
+ * ---------------------------------------------------------------------------
+ * Timer initialization
+ * ---------------------------------------------------------------------------
+ */
+static void __init omap_timer_init(void)
+{
+	if (omap_32k_timer_usable()) {
+		preferred_sched_clock_init(1);
+	} else {
+		omap_mpu_timer_init();
+		preferred_sched_clock_init(0);
+	}
+}
+
 struct sys_timer omap_timer = {
 	.init		= omap_timer_init,
 };

arch/arm/mach-omap1/timer32k.c

@@ -52,10 +52,9 @@
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
+#include <plat/common.h>
 #include <plat/dmtimer.h>
 
-struct sys_timer omap_timer;
-
 /*
  * ---------------------------------------------------------------------------
  * 32KHz OS timer
@@ -181,14 +180,14 @@ static __init void omap_init_32k_timer(void)
  * Timer initialization
  * ---------------------------------------------------------------------------
  */
-static void __init omap_timer_init(void)
+bool __init omap_32k_timer_init(void)
 {
+	omap_init_clocksource_32k();
+
 #ifdef CONFIG_OMAP_DM_TIMER
 	omap_dm_timer_init();
 #endif
 	omap_init_32k_timer();
-}
 
-struct sys_timer omap_timer = {
+	return true;
-	.init		= omap_timer_init,
+}
-};

arch/arm/mach-omap2/board-cm-t3517.c

@@ -124,8 +124,9 @@ static inline void cm_t3517_init_hecc(void) {}
 #if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
 #define RTC_IO_GPIO		(153)
 #define RTC_WR_GPIO		(154)
-#define RTC_RD_GPIO		(160)
+#define RTC_RD_GPIO		(53)
 #define RTC_CS_GPIO		(163)
+#define RTC_CS_EN_GPIO		(160)
 
 struct v3020_platform_data cm_t3517_v3020_pdata = {
 	.use_gpio	= 1,
@@ -145,6 +146,16 @@ static struct platform_device cm_t3517_rtc_device = {
 
 static void __init cm_t3517_init_rtc(void)
 {
+	int err;
+
+	err = gpio_request(RTC_CS_EN_GPIO, "rtc cs en");
+	if (err) {
+		pr_err("CM-T3517: rtc cs en gpio request failed: %d\n", err);
+		return;
+	}
+
+	gpio_direction_output(RTC_CS_EN_GPIO, 1);
+
 	platform_device_register(&cm_t3517_rtc_device);
 }
 #else
@@ -214,12 +225,12 @@ static struct mtd_partition cm_t3517_nand_partitions[] = {
 	},
 	{
 		.name           = "linux",
-		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x280000 */
+		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x2A0000 */
 		.size           = 32 * NAND_BLOCK_SIZE,
 	},
 	{
 		.name           = "rootfs",
-		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x680000 */
+		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x6A0000 */
 		.size           = MTDPART_SIZ_FULL,
 	},
 };
@@ -256,11 +267,19 @@ static void __init cm_t3517_init_irq(void)
 static struct omap_board_mux board_mux[] __initdata = {
 	/* GPIO186 - Green LED */
 	OMAP3_MUX(SYS_CLKOUT2, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
-	/* RTC GPIOs: IO, WR#, RD#, CS# */
+
+	/* RTC GPIOs: */
+	/* IO - GPIO153 */
 	OMAP3_MUX(MCBSP4_DR, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
+	/* WR# - GPIO154 */
 	OMAP3_MUX(MCBSP4_DX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
-	OMAP3_MUX(MCBSP_CLKS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
+	/* RD# - GPIO53 */
+	OMAP3_MUX(GPMC_NCS2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
+	/* CS# - GPIO163 */
 	OMAP3_MUX(UART3_CTS_RCTX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
+	/* CS EN - GPIO160 */
+	OMAP3_MUX(MCBSP_CLKS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
+
 	/* HSUSB1 RESET */
 	OMAP3_MUX(UART2_TX, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
 	/* HSUSB2 RESET */

arch/arm/mach-omap2/board-devkit8000.c

@@ -275,8 +275,7 @@ static struct twl4030_gpio_platform_data devkit8000_gpio_data = {
 	.irq_base	= TWL4030_GPIO_IRQ_BASE,
 	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.use_leds	= true,
-	.pullups	= BIT(1),
+	.pulldowns	= BIT(1) | BIT(2) | BIT(6) | BIT(8) | BIT(13)
-	.pulldowns	= BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13)
 				| BIT(15) | BIT(16) | BIT(17),
 	.setup		= devkit8000_twl_gpio_setup,
 };

arch/arm/mach-omap2/clock44xx_data.c

@@ -34,7 +34,6 @@
 #include "cm2_44xx.h"
 #include "cm-regbits-44xx.h"
 #include "prm44xx.h"
-#include "prm44xx.h"
 #include "prm-regbits-44xx.h"
 #include "control.h"
 #include "scrm44xx.h"

arch/arm/mach-omap2/clockdomain.c

@@ -423,6 +423,12 @@ int clkdm_add_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
 {
 	struct clkdm_dep *cd;
 
+	if (!cpu_is_omap24xx() && !cpu_is_omap34xx()) {
+		pr_err("clockdomain: %s/%s: %s: not yet implemented\n",
+		       clkdm1->name, clkdm2->name, __func__);
+		return -EINVAL;
+	}
+
 	if (!clkdm1 || !clkdm2)
 		return -EINVAL;
 
@@ -458,6 +464,12 @@ int clkdm_del_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
 {
 	struct clkdm_dep *cd;
 
+	if (!cpu_is_omap24xx() && !cpu_is_omap34xx()) {
+		pr_err("clockdomain: %s/%s: %s: not yet implemented\n",
+		       clkdm1->name, clkdm2->name, __func__);
+		return -EINVAL;
+	}
+
 	if (!clkdm1 || !clkdm2)
 		return -EINVAL;
 
@@ -500,6 +512,12 @@ int clkdm_read_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
 	if (!clkdm1 || !clkdm2)
 		return -EINVAL;
 
+	if (!cpu_is_omap24xx() && !cpu_is_omap34xx()) {
+		pr_err("clockdomain: %s/%s: %s: not yet implemented\n",
+		       clkdm1->name, clkdm2->name, __func__);
+		return -EINVAL;
+	}
+
 	cd = _clkdm_deps_lookup(clkdm2, clkdm1->wkdep_srcs);
 	if (IS_ERR(cd)) {
 		pr_debug("clockdomain: hardware cannot set/clear wake up of "
@@ -527,6 +545,12 @@ int clkdm_clear_all_wkdeps(struct clockdomain *clkdm)
 	struct clkdm_dep *cd;
 	u32 mask = 0;
 
+	if (!cpu_is_omap24xx() && !cpu_is_omap34xx()) {
+		pr_err("clockdomain: %s: %s: not yet implemented\n",
+		       clkdm->name, __func__);
+		return -EINVAL;
+	}
+
 	if (!clkdm)
 		return -EINVAL;
 
@@ -830,8 +854,7 @@ void omap2_clkdm_allow_idle(struct clockdomain *clkdm)
 	 * dependency code and data for OMAP4.
 	 */
 	if (cpu_is_omap44xx()) {
-		WARN_ONCE(1, "clockdomain: OMAP4 wakeup/sleep dependency "
+		pr_err("clockdomain: %s: OMAP4 wakeup/sleep dependency support: not yet implemented\n", clkdm->name);
-			  "support is not yet implemented\n");
 	} else {
 		if (atomic_read(&clkdm->usecount) > 0)
 			_clkdm_add_autodeps(clkdm);
@@ -872,8 +895,7 @@ void omap2_clkdm_deny_idle(struct clockdomain *clkdm)
 	 * dependency code and data for OMAP4.
 	 */
 	if (cpu_is_omap44xx()) {
-		WARN_ONCE(1, "clockdomain: OMAP4 wakeup/sleep dependency "
+		pr_err("clockdomain: %s: OMAP4 wakeup/sleep dependency support: not yet implemented\n", clkdm->name);
-			  "support is not yet implemented\n");
 	} else {
 		if (atomic_read(&clkdm->usecount) > 0)
 			_clkdm_del_autodeps(clkdm);

arch/arm/mach-omap2/clockdomains44xx_data.c

@@ -30,8 +30,6 @@
 #include "cm1_44xx.h"
 #include "cm2_44xx.h"
 
-#include "cm1_44xx.h"
-#include "cm2_44xx.h"
 #include "cm-regbits-44xx.h"
 #include "prm44xx.h"
 #include "prcm44xx.h"

arch/arm/mach-omap2/dma.c

@@ -264,7 +264,7 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused)
 	if (IS_ERR(od)) {
 		pr_err("%s: Cant build omap_device for %s:%s.\n",
 			__func__, name, oh->name);
-		return IS_ERR(od);
+		return PTR_ERR(od);
 	}
 
 	mem = platform_get_resource(&od->pdev, IORESOURCE_MEM, 0);

arch/arm/mach-omap2/include/mach/entry-macro.S

@@ -38,20 +38,6 @@
  */
 
 #ifdef MULTI_OMAP2
-
-/*
- * We use __glue to avoid errors with multiple definitions of
- * .globl omap_irq_base as it's included from entry-armv.S but not
- * from entry-common.S.
- */
-#ifdef __glue
-		.pushsection .data
-		.globl	omap_irq_base
-omap_irq_base:
-		.word	0
-		.popsection
-#endif
-
 		/*
 		 * Configure the interrupt base on the first interrupt.
 		 * See also omap_irq_base_init for setting omap_irq_base.

arch/arm/mach-omap2/io.c

@@ -314,14 +314,13 @@ static int _set_hwmod_postsetup_state(struct omap_hwmod *oh, void *data)
 	return omap_hwmod_set_postsetup_state(oh, *(u8 *)data);
 }
 
+void __iomem *omap_irq_base;
+
 /*
  * Initialize asm_irq_base for entry-macro.S
  */
 static inline void omap_irq_base_init(void)
 {
-	extern void __iomem *omap_irq_base;
-
-#ifdef MULTI_OMAP2
 	if (cpu_is_omap24xx())
 		omap_irq_base = OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE);
 	else if (cpu_is_omap34xx())
@@ -330,7 +329,6 @@ static inline void omap_irq_base_init(void)
 		omap_irq_base = OMAP2_L4_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE);
 	else
 		pr_err("Could not initialize omap_irq_base\n");
-#endif
 }
 
 void __init omap2_init_common_infrastructure(void)

arch/arm/mach-omap2/mux.c

@@ -160,7 +160,7 @@ static int __init _omap_mux_get_by_name(struct omap_mux_partition *partition,
 	struct omap_mux *mux = NULL;
 	struct omap_mux_entry *e;
 	const char *mode_name;
-	int found = 0, found_mode, mode0_len = 0;
+	int found = 0, found_mode = 0, mode0_len = 0;
 	struct list_head *muxmodes = &partition->muxmodes;
 
 	mode_name = strchr(muxname, '.');

arch/arm/mach-omap2/pm24xx.c

@@ -134,7 +134,7 @@ static void omap2_enter_full_retention(void)
 
 	/* Block console output in case it is on one of the OMAP UARTs */
 	if (!is_suspending())
-		if (try_acquire_console_sem())
+		if (!console_trylock())
 			goto no_sleep;
 
 	omap_uart_prepare_idle(0);
@@ -151,7 +151,7 @@ static void omap2_enter_full_retention(void)
 	omap_uart_resume_idle(0);
 
 	if (!is_suspending())
-		release_console_sem();
+		console_unlock();
 
 no_sleep:
 	if (omap2_pm_debug) {

arch/arm/mach-omap2/pm34xx.c

@@ -398,7 +398,7 @@ void omap_sram_idle(void)
 	if (!is_suspending())
 		if (per_next_state < PWRDM_POWER_ON ||
 		    core_next_state < PWRDM_POWER_ON)
-			if (try_acquire_console_sem())
+			if (!console_trylock())
 				goto console_still_active;
 
 	/* PER */
@@ -481,7 +481,7 @@ void omap_sram_idle(void)
 	}
 
 	if (!is_suspending())
-		release_console_sem();
+		console_unlock();
 
 console_still_active:
 	/* Disable IO-PAD and IO-CHAIN wakeup */

arch/arm/mach-omap2/powerdomain2xxx_3xxx.c

@@ -19,7 +19,6 @@
 #include <plat/prcm.h>
 
 #include "powerdomain.h"
-#include "prm-regbits-34xx.h"
 #include "prm.h"
 #include "prm-regbits-24xx.h"
 #include "prm-regbits-34xx.h"

arch/arm/mach-omap2/serial.c

@@ -812,7 +812,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata)
 
 	oh->dev_attr = uart;
 
-	acquire_console_sem(); /* in case the earlycon is on the UART */
+	console_lock(); /* in case the earlycon is on the UART */
 
 	/*
 	 * Because of early UART probing, UART did not get idled
@@ -838,7 +838,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata)
 	omap_uart_block_sleep(uart);
 	uart->timeout = DEFAULT_TIMEOUT;
 
-	release_console_sem();
+	console_unlock();
 
 	if ((cpu_is_omap34xx() && uart->padconf) ||
 	    (uart->wk_en && uart->wk_mask)) {

arch/arm/mach-omap2/timer-gp.c

@@ -42,6 +42,8 @@
 
 #include "timer-gp.h"
 
+#include <plat/common.h>
+
 /* MAX_GPTIMER_ID: number of GPTIMERs on the chip */
 #define MAX_GPTIMER_ID		12
 
@@ -176,10 +178,14 @@ static void __init omap2_gp_clockevent_init(void)
 /* 
  * When 32k-timer is enabled, don't use GPTimer for clocksource
  * instead, just leave default clocksource which uses the 32k
- * sync counter.  See clocksource setup in see plat-omap/common.c. 
+ * sync counter.  See clocksource setup in plat-omap/counter_32k.c
  */
 
-static inline void __init omap2_gp_clocksource_init(void) {}
+static void __init omap2_gp_clocksource_init(void)
+{
+	omap_init_clocksource_32k();
+}
+
 #else
 /*
  * clocksource

arch/arm/mach-realview/Kconfig

@@ -2,52 +2,56 @@ menu "RealView platform type"
 	depends on ARCH_REALVIEW
 
 config MACH_REALVIEW_EB
-	bool "Support RealView/EB platform"
+	bool "Support RealView(R) Emulation Baseboard"
 	select ARM_GIC
 	help
-	  Include support for the ARM(R) RealView Emulation Baseboard platform.
+	  Include support for the ARM(R) RealView(R) Emulation Baseboard
+	  platform.
 
 config REALVIEW_EB_A9MP
-	bool "Support Multicore Cortex-A9"
+	bool "Support Multicore Cortex-A9 Tile"
 	depends on MACH_REALVIEW_EB
 	select CPU_V7
 	help
-	  Enable support for the Cortex-A9MPCore tile on the Realview platform.
+	  Enable support for the Cortex-A9MPCore tile fitted to the
+	  Realview(R) Emulation Baseboard platform.
 
 config REALVIEW_EB_ARM11MP
-	bool "Support ARM11MPCore tile"
+	bool "Support ARM11MPCore Tile"
 	depends on MACH_REALVIEW_EB
 	select CPU_V6
 	select ARCH_HAS_BARRIERS if SMP
 	help
-	  Enable support for the ARM11MPCore tile on the Realview platform.
+	  Enable support for the ARM11MPCore tile fitted to the Realview(R)
+	  Emulation Baseboard platform.
 
 config REALVIEW_EB_ARM11MP_REVB
-	bool "Support ARM11MPCore RevB tile"
+	bool "Support ARM11MPCore RevB Tile"
 	depends on REALVIEW_EB_ARM11MP
 	help
-	  Enable support for the ARM11MPCore RevB tile on the Realview
+	  Enable support for the ARM11MPCore Revision B tile on the
-	  platform. Since there are device address differences, a
+	  Realview(R) Emulation Baseboard platform. Since there are device
-	  kernel built with this option enabled is not compatible with
+	  address differences, a kernel built with this option enabled is
-	  other revisions of the ARM11MPCore tile.
+	  not compatible with other revisions of the ARM11MPCore tile.
 
 config MACH_REALVIEW_PB11MP
-	bool "Support RealView/PB11MPCore platform"
+	bool "Support RealView(R) Platform Baseboard for ARM11MPCore"
 	select CPU_V6
 	select ARM_GIC
 	select HAVE_PATA_PLATFORM
 	select ARCH_HAS_BARRIERS if SMP
 	help
-	  Include support for the ARM(R) RealView MPCore Platform Baseboard.
+	  Include support for the ARM(R) RealView(R) Platform Baseboard for
-	  PB11MPCore is a platform with an on-board ARM11MPCore and has
+	  the ARM11MPCore.  This platform has an on-board ARM11MPCore and has
 	  support for PCI-E and Compact Flash.
 
 config MACH_REALVIEW_PB1176
-	bool "Support RealView/PB1176 platform"
+	bool "Support RealView(R) Platform Baseboard for ARM1176JZF-S"
 	select CPU_V6
 	select ARM_GIC
 	help
-	  Include support for the ARM(R) RealView ARM1176 Platform Baseboard.
+	  Include support for the ARM(R) RealView(R) Platform Baseboard for
+	  ARM1176JZF-S.
 
 config REALVIEW_PB1176_SECURE_FLASH
 	bool "Allow access to the secure flash memory block"
@@ -59,23 +63,24 @@ config REALVIEW_PB1176_SECURE_FLASH
 	  block (64MB @ 0x3c000000) is required.
 
 config MACH_REALVIEW_PBA8
-	bool "Support RealView/PB-A8 platform"
+	bool "Support RealView(R) Platform Baseboard for Cortex(tm)-A8 platform"
 	select CPU_V7
 	select ARM_GIC
 	select HAVE_PATA_PLATFORM
 	help
-	  Include support for the ARM(R) RealView Cortex-A8 Platform Baseboard.
+	  Include support for the ARM(R) RealView Platform Baseboard for
-	  PB-A8 is a platform with an on-board Cortex-A8 and has support for
+	  Cortex(tm)-A8.  This platform has an on-board Cortex-A8 and has
-	  PCI-E and Compact Flash.
+	  support for PCI-E and Compact Flash.
 
 config MACH_REALVIEW_PBX
-	bool "Support RealView/PBX platform"
+	bool "Support RealView(R) Platform Baseboard Explore"
 	select ARM_GIC
 	select HAVE_PATA_PLATFORM
 	select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !REALVIEW_HIGH_PHYS_OFFSET
 	select ZONE_DMA if SPARSEMEM
 	help
-	  Include support for the ARM(R) RealView PBX platform.
+	  Include support for the ARM(R) RealView(R) Platform Baseboard
+	  Explore.
 
 config REALVIEW_HIGH_PHYS_OFFSET
 	bool "High physical base address for the RealView platform"

arch/arm/mach-realview/platsmp.c

@@ -41,7 +41,7 @@ volatile int __cpuinitdata pen_release = -1;
  * observers, irrespective of whether they're taking part in coherency
  * or not.  This is necessary for the hotplug code to work reliably.
  */
-static void write_pen_release(int val)
+static void __cpuinit write_pen_release(int val)
 {
 	pen_release = val;
 	smp_wmb();

arch/arm/mach-shmobile/Kconfig

@@ -60,6 +60,8 @@ endchoice
 
 config MACH_AG5EVM
 	bool "AG5EVM board"
+	select ARCH_REQUIRE_GPIOLIB
+	select SH_LCD_MIPI_DSI
 	depends on ARCH_SH73A0
 
 config MACH_MACKEREL

arch/arm/mach-shmobile/board-ag5evm.c

@@ -34,9 +34,10 @@
 #include <linux/input/sh_keysc.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/sh_mmcif.h>
-
+#include <linux/sh_clk.h>
+#include <video/sh_mobile_lcdc.h>
+#include <video/sh_mipi_dsi.h>
 #include <sound/sh_fsi.h>
-
 #include <mach/hardware.h>
 #include <mach/sh73a0.h>
 #include <mach/common.h>
@@ -183,11 +184,165 @@ static struct platform_device mmc_device = {
 	.resource	= sh_mmcif_resources,
 };
 
+/* IrDA */
+static struct resource irda_resources[] = {
+	[0] = {
+		.start	= 0xE6D00000,
+		.end	= 0xE6D01FD4 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gic_spi(95),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device irda_device = {
+	.name           = "sh_irda",
+	.id		= 0,
+	.resource       = irda_resources,
+	.num_resources  = ARRAY_SIZE(irda_resources),
+};
+
+static unsigned char lcd_backlight_seq[3][2] = {
+	{ 0x04, 0x07 },
+	{ 0x23, 0x80 },
+	{ 0x03, 0x01 },
+};
+
+static void lcd_backlight_on(void)
+{
+	struct i2c_adapter *a;
+	struct i2c_msg msg;
+	int k;
+
+	a = i2c_get_adapter(1);
+	for (k = 0; a && k < 3; k++) {
+		msg.addr = 0x6d;
+		msg.buf = &lcd_backlight_seq[k][0];
+		msg.len = 2;
+		msg.flags = 0;
+		if (i2c_transfer(a, &msg, 1) != 1)
+			break;
+	}
+}
+
+static void lcd_backlight_reset(void)
+{
+	gpio_set_value(GPIO_PORT235, 0);
+	mdelay(24);
+	gpio_set_value(GPIO_PORT235, 1);
+}
+
+static void lcd_on(void *board_data, struct fb_info *info)
+{
+	lcd_backlight_on();
+}
+
+static void lcd_off(void *board_data)
+{
+	lcd_backlight_reset();
+}
+
+/* LCDC0 */
+static const struct fb_videomode lcdc0_modes[] = {
+	{
+		.name		= "R63302(QHD)",
+		.xres		= 544,
+		.yres		= 961,
+		.left_margin	= 72,
+		.right_margin	= 600,
+		.hsync_len	= 16,
+		.upper_margin	= 8,
+		.lower_margin	= 8,
+		.vsync_len	= 2,
+		.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT,
+	},
+};
+
+static struct sh_mobile_lcdc_info lcdc0_info = {
+	.clock_source = LCDC_CLK_PERIPHERAL,
+	.ch[0] = {
+		.chan = LCDC_CHAN_MAINLCD,
+		.interface_type = RGB24,
+		.clock_divider = 1,
+		.flags = LCDC_FLAGS_DWPOL,
+		.lcd_size_cfg.width = 44,
+		.lcd_size_cfg.height = 79,
+		.bpp = 16,
+		.lcd_cfg = lcdc0_modes,
+		.num_cfg = ARRAY_SIZE(lcdc0_modes),
+		.board_cfg = {
+			.display_on = lcd_on,
+			.display_off = lcd_off,
+		},
+	}
+};
+
+static struct resource lcdc0_resources[] = {
+	[0] = {
+		.name	= "LCDC0",
+		.start	= 0xfe940000, /* P4-only space */
+		.end	= 0xfe943fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= intcs_evt2irq(0x580),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device lcdc0_device = {
+	.name		= "sh_mobile_lcdc_fb",
+	.num_resources	= ARRAY_SIZE(lcdc0_resources),
+	.resource	= lcdc0_resources,
+	.id             = 0,
+	.dev	= {
+		.platform_data	= &lcdc0_info,
+		.coherent_dma_mask = ~0,
+	},
+};
+
+/* MIPI-DSI */
+static struct resource mipidsi0_resources[] = {
+	[0] = {
+		.start  = 0xfeab0000,
+		.end    = 0xfeab3fff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 0xfeab4000,
+		.end    = 0xfeab7fff,
+		.flags  = IORESOURCE_MEM,
+	},
+};
+
+static struct sh_mipi_dsi_info mipidsi0_info = {
+	.data_format	= MIPI_RGB888,
+	.lcd_chan	= &lcdc0_info.ch[0],
+	.vsynw_offset	= 20,
+	.clksrc		= 1,
+	.flags		= SH_MIPI_DSI_HSABM,
+};
+
+static struct platform_device mipidsi0_device = {
+	.name           = "sh-mipi-dsi",
+	.num_resources  = ARRAY_SIZE(mipidsi0_resources),
+	.resource       = mipidsi0_resources,
+	.id             = 0,
+	.dev	= {
+		.platform_data	= &mipidsi0_info,
+	},
+};
+
 static struct platform_device *ag5evm_devices[] __initdata = {
 	&eth_device,
 	&keysc_device,
 	&fsi_device,
 	&mmc_device,
+	&irda_device,
+	&lcdc0_device,
+	&mipidsi0_device,
 };
 
 static struct map_desc ag5evm_io_desc[] __initdata = {
@@ -224,6 +379,8 @@ void __init ag5evm_init_irq(void)
 	__raw_writew(__raw_readw(PINTCR0A) | (2<<10), PINTCR0A);
 }
 
+#define DSI0PHYCR	0xe615006c
+
 static void __init ag5evm_init(void)
 {
 	sh73a0_pinmux_init();
@@ -287,6 +444,25 @@ static void __init ag5evm_init(void)
 	gpio_request(GPIO_FN_FSIAISLD, NULL);
 	gpio_request(GPIO_FN_FSIAOSLD, NULL);
 
+	/* IrDA */
+	gpio_request(GPIO_FN_PORT241_IRDA_OUT, NULL);
+	gpio_request(GPIO_FN_PORT242_IRDA_IN,  NULL);
+	gpio_request(GPIO_FN_PORT243_IRDA_FIRSEL, NULL);
+
+	/* LCD panel */
+	gpio_request(GPIO_PORT217, NULL); /* RESET */
+	gpio_direction_output(GPIO_PORT217, 0);
+	mdelay(1);
+	gpio_set_value(GPIO_PORT217, 1);
+
+	/* LCD backlight controller */
+	gpio_request(GPIO_PORT235, NULL); /* RESET */
+	gpio_direction_output(GPIO_PORT235, 0);
+	lcd_backlight_reset();
+
+	/* MIPI-DSI clock setup */
+	__raw_writel(0x2a809010, DSI0PHYCR);
+
 #ifdef CONFIG_CACHE_L2X0
 	/* Shared attribute override enable, 64K*8way */
 	l2x0_init(__io(0xf0100000), 0x00460000, 0xc2000fff);

arch/arm/mach-shmobile/board-g3evm.c

@@ -347,7 +347,6 @@ static void __init g3evm_init(void)
 	gpio_request(GPIO_FN_IRDA_OUT, NULL);
 	gpio_request(GPIO_FN_IRDA_IN, NULL);
 	gpio_request(GPIO_FN_IRDA_FIRSEL, NULL);
-	set_irq_type(evt2irq(0x480), IRQ_TYPE_LEVEL_LOW);
 
 	sh7367_add_standard_devices();
 

arch/arm/mach-shmobile/board-mackerel.c

@@ -169,9 +169,8 @@
  *	SW1	|	SW33
  *		| bit1 | bit2 | bit3 | bit4
  * -------------+------+------+------+-------
- * MMC0	  OFF	|  OFF |  ON  |  ON  |  X
+ * MMC0   OFF	|  OFF |   X  |  ON  |  X       (Use MMCIF)
- * MMC1	  ON	|  OFF |  ON  |  X   | ON
+ * SDHI1  OFF	|  ON  |   X  |  OFF |  X       (Use MFD_SH_MOBILE_SDHI)
- * SDHI1  OFF	|  ON  |   X  |  OFF | ON
  *
  */
 

arch/arm/mach-shmobile/clock-sh7372.c

@@ -234,7 +234,9 @@ static int pllc2_set_rate(struct clk *clk, unsigned long rate)
 
 	value = __raw_readl(PLLC2CR) & ~(0x3f << 24);
 
-	__raw_writel((value & ~0x80000000) | ((idx + 19) << 24), PLLC2CR);
+	__raw_writel(value | ((idx + 19) << 24), PLLC2CR);
+
+	clk->rate = clk->freq_table[idx].frequency;
 
 	return 0;
 }

arch/arm/mach-shmobile/clock-sh73a0.c

@@ -118,8 +118,16 @@ static unsigned long pll_recalc(struct clk *clk)
 {
 	unsigned long mult = 1;
 
-	if (__raw_readl(PLLECR) & (1 << clk->enable_bit))
+	if (__raw_readl(PLLECR) & (1 << clk->enable_bit)) {
 		mult = (((__raw_readl(clk->enable_reg) >> 24) & 0x3f) + 1);
+		/* handle CFG bit for PLL1 and PLL2 */
+		switch (clk->enable_bit) {
+		case 1:
+		case 2:
+			if (__raw_readl(clk->enable_reg) & (1 << 20))
+				mult *= 2;
+		}
+	}
 
 	return clk->parent->rate * mult;
 }
@@ -212,7 +220,7 @@ enum { DIV4_I, DIV4_ZG, DIV4_M3, DIV4_B, DIV4_M1, DIV4_M2,
 static struct clk div4_clks[DIV4_NR] = {
 	[DIV4_I] = DIV4(FRQCRA, 20, 0xfff, CLK_ENABLE_ON_INIT),
 	[DIV4_ZG] = DIV4(FRQCRA, 16, 0xbff, CLK_ENABLE_ON_INIT),
-	[DIV4_M3] = DIV4(FRQCRA, 8, 0xfff, CLK_ENABLE_ON_INIT),
+	[DIV4_M3] = DIV4(FRQCRA, 12, 0xfff, CLK_ENABLE_ON_INIT),
 	[DIV4_B] = DIV4(FRQCRA, 8, 0xfff, CLK_ENABLE_ON_INIT),
 	[DIV4_M1] = DIV4(FRQCRA, 4, 0xfff, 0),
 	[DIV4_M2] = DIV4(FRQCRA, 0, 0xfff, 0),
@@ -255,10 +263,10 @@ static struct clk div6_clks[DIV6_NR] = {
 };
 
 enum { MSTP001,
-	MSTP125, MSTP116,
+	MSTP125, MSTP118, MSTP116, MSTP100,
 	MSTP219,
 	MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
-	MSTP331, MSTP329, MSTP323, MSTP312,
+	MSTP331, MSTP329, MSTP325, MSTP323, MSTP312,
 	MSTP411, MSTP410, MSTP403,
 	MSTP_NR };
 
@@ -268,7 +276,9 @@ enum { MSTP001,
 static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP001] = MSTP(&div4_clks[DIV4_HP], SMSTPCR0, 1, 0), /* IIC2 */
 	[MSTP125] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR1, 25, 0), /* TMU0 */
+	[MSTP118] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 18, 0), /* DSITX0 */
 	[MSTP116] = MSTP(&div4_clks[DIV4_HP], SMSTPCR1, 16, 0), /* IIC0 */
+	[MSTP100] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 0, 0), /* LCDC0 */
 	[MSTP219] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 19, 0), /* SCIFA7 */
 	[MSTP207] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 7, 0), /* SCIFA5 */
 	[MSTP206] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 6, 0), /* SCIFB */
@@ -279,6 +289,7 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP200] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 0, 0), /* SCIFA4 */
 	[MSTP331] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 31, 0), /* SCIFA6 */
 	[MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */
+	[MSTP325] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 25, 0), /* IrDA */
 	[MSTP323] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 23, 0), /* IIC1 */
 	[MSTP312] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 12, 0), /* MMCIF0 */
 	[MSTP411] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 11, 0), /* IIC3 */
@@ -288,16 +299,25 @@ static struct clk mstp_clks[MSTP_NR] = {
 
 #define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk }
 #define CLKDEV_DEV_ID(_id, _clk) { .dev_id = _id, .clk = _clk }
+#define CLKDEV_ICK_ID(_cid, _did, _clk) { .con_id = _cid, .dev_id = _did, .clk = _clk }
 
 static struct clk_lookup lookups[] = {
 	/* main clocks */
 	CLKDEV_CON_ID("r_clk", &r_clk),
 
+	/* DIV6 clocks */
+	CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSIT]),
+	CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSIT]),
+	CLKDEV_ICK_ID("dsi0p_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]),
+	CLKDEV_ICK_ID("dsi1p_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]),
+
 	/* MSTP32 clocks */
 	CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* I2C2 */
+	CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[MSTP100]), /* LCDC0 */
 	CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP125]), /* TMU00 */
 	CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP125]), /* TMU01 */
 	CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* I2C0 */
+	CLKDEV_DEV_ID("sh-mipi-dsi.0", &mstp_clks[MSTP118]), /* DSITX */
 	CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP219]), /* SCIFA7 */
 	CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */
 	CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]), /* SCIFB */
@@ -308,6 +328,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]), /* SCIFA4 */
 	CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP331]), /* SCIFA6 */
 	CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */
+	CLKDEV_DEV_ID("sh_irda.0", &mstp_clks[MSTP325]), /* IrDA */
 	CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* I2C1 */
 	CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMCIF0 */
 	CLKDEV_DEV_ID("i2c-sh_mobile.3", &mstp_clks[MSTP411]), /* I2C3 */

arch/arm/mach-shmobile/intc-sh7372.c

@@ -365,6 +365,7 @@ static struct intc_desc intca_desc __initdata = {
 
 enum {
 	UNUSED_INTCS = 0,
+	ENABLED_INTCS,
 
 	INTCS,
 
@@ -413,7 +414,7 @@ enum {
 	CMT4,
 	DSITX1_DSITX1_0,
 	DSITX1_DSITX1_1,
-	/* MFIS2 */
+	MFIS2_INTCS, /* Priority always enabled using ENABLED_INTCS */
 	CPORTS2R,
 	/* CEC */
 	JPU6E,
@@ -477,7 +478,7 @@ static struct intc_vect intcs_vectors[] = {
 	INTCS_VECT(CMT4, 0x1980),
 	INTCS_VECT(DSITX1_DSITX1_0, 0x19a0),
 	INTCS_VECT(DSITX1_DSITX1_1, 0x19c0),
-	/* MFIS2 */
+	INTCS_VECT(MFIS2_INTCS, 0x1a00),
 	INTCS_VECT(CPORTS2R, 0x1a20),
 	/* CEC */
 	INTCS_VECT(JPU6E, 0x1a80),
@@ -543,7 +544,7 @@ static struct intc_mask_reg intcs_mask_registers[] = {
 	  { 0, TMU1_TUNI2, TMU1_TUNI1, TMU1_TUNI0,
 	    CMT4, DSITX1_DSITX1_0, DSITX1_DSITX1_1, 0 } },
 	{ 0xffd5019c, 0xffd501dc, 8, /* IMR7SA3 / IMCR7SA3 */
-	  { 0, CPORTS2R, 0, 0,
+	  { MFIS2_INTCS, CPORTS2R, 0, 0,
 	    JPU6E, 0, 0, 0 } },
 	{ 0xffd20104, 0, 16, /* INTAMASK */
 	  { 0, 0, 0, 0, 0, 0, 0, 0,
@@ -571,7 +572,8 @@ static struct intc_prio_reg intcs_prio_registers[] = {
 	{ 0xffd50030, 0, 16, 4, /* IPRMS3 */ { TMU1, 0, 0, 0 } },
 	{ 0xffd50034, 0, 16, 4, /* IPRNS3 */ { CMT4, DSITX1_DSITX1_0,
 					       DSITX1_DSITX1_1, 0 } },
-	{ 0xffd50038, 0, 16, 4, /* IPROS3 */ { 0, CPORTS2R, 0, 0 } },
+	{ 0xffd50038, 0, 16, 4, /* IPROS3 */ { ENABLED_INTCS, CPORTS2R,
+					       0, 0 } },
 	{ 0xffd5003c, 0, 16, 4, /* IPRPS3 */ { JPU6E, 0, 0, 0 } },
 };
 
@@ -590,6 +592,7 @@ static struct resource intcs_resources[] __initdata = {
 
 static struct intc_desc intcs_desc __initdata = {
 	.name = "sh7372-intcs",
+	.force_enable = ENABLED_INTCS,
 	.resource = intcs_resources,
 	.num_resources = ARRAY_SIZE(intcs_resources),
 	.hw = INTC_HW_DESC(intcs_vectors, intcs_groups, intcs_mask_registers,

arch/arm/mach-shmobile/intc-sh73a0.c

@@ -252,10 +252,11 @@ static irqreturn_t sh73a0_intcs_demux(int irq, void *dev_id)
 
 void __init sh73a0_init_irq(void)
 {
-	void __iomem *gic_base = __io(0xf0001000);
+	void __iomem *gic_dist_base = __io(0xf0001000);
+	void __iomem *gic_cpu_base = __io(0xf0000100);
 	void __iomem *intevtsa = ioremap_nocache(0xffd20100, PAGE_SIZE);
 
-	gic_init(0, 29, gic_base, gic_base);
+	gic_init(0, 29, gic_dist_base, gic_cpu_base);
 
 	register_intc_controller(&intcs_desc);
 

arch/arm/mach-tegra/gpio.c

@@ -207,9 +207,9 @@ static int tegra_gpio_irq_set_type(struct irq_data *d, unsigned int type)
 	spin_unlock_irqrestore(&bank->lvl_lock[port], flags);
 
 	if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
-		__set_irq_handler_unlocked(irq, handle_level_irq);
+		__set_irq_handler_unlocked(d->irq, handle_level_irq);
 	else if (type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
-		__set_irq_handler_unlocked(irq, handle_edge_irq);
+		__set_irq_handler_unlocked(d->irq, handle_edge_irq);
 
 	return 0;
 }

arch/arm/mach-tegra/include/mach/clk.h

@@ -20,6 +20,8 @@
 #ifndef __MACH_CLK_H
 #define __MACH_CLK_H
 
+struct clk;
+
 void tegra_periph_reset_deassert(struct clk *c);
 void tegra_periph_reset_assert(struct clk *c);
 

arch/arm/mach-tegra/include/mach/clkdev.h

@@ -20,6 +20,8 @@
 #ifndef __MACH_CLKDEV_H
 #define __MACH_CLKDEV_H
 
+struct clk;
+
 static inline int __clk_get(struct clk *clk)
 {
 	return 1;

arch/arm/mach-tegra/include/mach/kbc.h

@@ -0,0 +1,61 @@
+/*
+ * Platform definitions for tegra-kbc keyboard input driver
+ *
+ * Copyright (c) 2010-2011, NVIDIA Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ */
+
+#ifndef ASMARM_ARCH_TEGRA_KBC_H
+#define ASMARM_ARCH_TEGRA_KBC_H
+
+#include <linux/types.h>
+#include <linux/input/matrix_keypad.h>
+
+#ifdef CONFIG_ARCH_TEGRA_2x_SOC
+#define KBC_MAX_GPIO	24
+#define KBC_MAX_KPENT	8
+#else
+#define KBC_MAX_GPIO	20
+#define KBC_MAX_KPENT	7
+#endif
+
+#define KBC_MAX_ROW	16
+#define KBC_MAX_COL	8
+#define KBC_MAX_KEY	(KBC_MAX_ROW * KBC_MAX_COL)
+
+struct tegra_kbc_pin_cfg {
+	bool is_row;
+	unsigned char num;
+};
+
+struct tegra_kbc_wake_key {
+	u8 row:4;
+	u8 col:4;
+};
+
+struct tegra_kbc_platform_data {
+	unsigned int debounce_cnt;
+	unsigned int repeat_cnt;
+
+	unsigned int wake_cnt; /* 0:wake on any key >1:wake on wake_cfg */
+	const struct tegra_kbc_wake_key *wake_cfg;
+
+	struct tegra_kbc_pin_cfg pin_cfg[KBC_MAX_GPIO];
+	const struct matrix_keymap_data *keymap_data;
+
+	bool wakeup;
+};
+#endif

arch/arm/mach-tegra/irq.c

@@ -46,24 +46,24 @@
 #define ICTLR_COP_IER_CLR	0x38
 #define ICTLR_COP_IEP_CLASS	0x3c
 
-static void (*gic_mask_irq)(struct irq_data *d);
+static void (*tegra_gic_mask_irq)(struct irq_data *d);
-static void (*gic_unmask_irq)(struct irq_data *d);
+static void (*tegra_gic_unmask_irq)(struct irq_data *d);
 
-#define irq_to_ictlr(irq) (((irq)-32) >> 5)
+#define irq_to_ictlr(irq) (((irq) - 32) >> 5)
 static void __iomem *tegra_ictlr_base = IO_ADDRESS(TEGRA_PRIMARY_ICTLR_BASE);
-#define ictlr_to_virt(ictlr) (tegra_ictlr_base + (ictlr)*0x100)
+#define ictlr_to_virt(ictlr) (tegra_ictlr_base + (ictlr) * 0x100)
 
 static void tegra_mask(struct irq_data *d)
 {
 	void __iomem *addr = ictlr_to_virt(irq_to_ictlr(d->irq));
-	gic_mask_irq(d);
+	tegra_gic_mask_irq(d);
-	writel(1<<(d->irq&31), addr+ICTLR_CPU_IER_CLR);
+	writel(1 << (d->irq & 31), addr+ICTLR_CPU_IER_CLR);
 }
 
 static void tegra_unmask(struct irq_data *d)
 {
 	void __iomem *addr = ictlr_to_virt(irq_to_ictlr(d->irq));
-	gic_unmask_irq(d);
+	tegra_gic_unmask_irq(d);
 	writel(1<<(d->irq&31), addr+ICTLR_CPU_IER_SET);
 }
 
@@ -98,8 +98,8 @@ void __init tegra_init_irq(void)
 		 IO_ADDRESS(TEGRA_ARM_PERIF_BASE + 0x100));
 
 	gic = get_irq_chip(29);
-	gic_unmask_irq = gic->irq_unmask;
+	tegra_gic_unmask_irq = gic->irq_unmask;
-	gic_mask_irq = gic->irq_mask;
+	tegra_gic_mask_irq = gic->irq_mask;
 	tegra_irq.irq_ack = gic->irq_ack;
 #ifdef CONFIG_SMP
 	tegra_irq.irq_set_affinity = gic->irq_set_affinity;

arch/arm/mach-versatile/Kconfig

@@ -2,17 +2,19 @@ menu "Versatile platform type"
 	depends on ARCH_VERSATILE
 
 config ARCH_VERSATILE_PB
-	bool "Support Versatile/PB platform"
+	bool "Support Versatile Platform Baseboard for ARM926EJ-S"
 	select CPU_ARM926T
 	select MIGHT_HAVE_PCI
 	default y
 	help
-	  Include support for the ARM(R) Versatile/PB platform.
+	  Include support for the ARM(R) Versatile Platform Baseboard
+	  for the ARM926EJ-S.
 
 config MACH_VERSATILE_AB
-	bool "Support Versatile/AB platform"
+	bool "Support Versatile Application Baseboard for ARM926EJ-S"
 	select CPU_ARM926T
 	help
-	  Include support for the ARM(R) Versatile/AP platform.
+	  Include support for the ARM(R) Versatile Application Baseboard
+	  for the ARM926EJ-S.
 
 endmenu

arch/arm/mach-vexpress/platsmp.c

@@ -39,7 +39,7 @@ volatile int __cpuinitdata pen_release = -1;
  * observers, irrespective of whether they're taking part in coherency
  * or not.  This is necessary for the hotplug code to work reliably.
  */
-static void write_pen_release(int val)
+static void __cpuinit write_pen_release(int val)
 {
 	pen_release = val;
 	smp_wmb();

arch/arm/mach-vexpress/v2m.c

@@ -19,6 +19,7 @@
 #include <asm/mach/time.h>
 #include <asm/hardware/arm_timer.h>
 #include <asm/hardware/timer-sp.h>
+#include <asm/hardware/sp810.h>
 
 #include <mach/motherboard.h>
 
@@ -50,8 +51,16 @@ void __init v2m_map_io(struct map_desc *tile, size_t num)
 
 static void __init v2m_timer_init(void)
 {
+	u32 scctrl;
+
 	versatile_sched_clock_init(MMIO_P2V(V2M_SYS_24MHZ), 24000000);
 
+	/* Select 1MHz TIMCLK as the reference clock for SP804 timers */
+	scctrl = readl(MMIO_P2V(V2M_SYSCTL + SCCTRL));
+	scctrl |= SCCTRL_TIMEREN0SEL_TIMCLK;
+	scctrl |= SCCTRL_TIMEREN1SEL_TIMCLK;
+	writel(scctrl, MMIO_P2V(V2M_SYSCTL + SCCTRL));
+
 	writel(0, MMIO_P2V(V2M_TIMER0) + TIMER_CTRL);
 	writel(0, MMIO_P2V(V2M_TIMER1) + TIMER_CTRL);
 

arch/arm/mm/init.c

@@ -297,6 +297,12 @@ void __init arm_memblock_init(struct meminfo *mi, struct machine_desc *mdesc)
 	memblock_reserve(__pa(_stext), _end - _stext);
 #endif
 #ifdef CONFIG_BLK_DEV_INITRD
+	if (phys_initrd_size &&
+	    memblock_is_region_reserved(phys_initrd_start, phys_initrd_size)) {
+		pr_err("INITRD: 0x%08lx+0x%08lx overlaps in-use memory region - disabling initrd\n",
+		       phys_initrd_start, phys_initrd_size);
+		phys_initrd_start = phys_initrd_size = 0;
+	}
 	if (phys_initrd_size) {
 		memblock_reserve(phys_initrd_start, phys_initrd_size);
 

arch/arm/plat-omap/Kconfig

@@ -144,12 +144,9 @@ config OMAP_IOMMU_DEBUG
 config OMAP_IOMMU_IVA2
 	bool
 
-choice
-	prompt "System timer"
-	default OMAP_32K_TIMER if !ARCH_OMAP15XX
-
 config OMAP_MPU_TIMER
 	bool "Use mpu timer"
+	depends on ARCH_OMAP1
 	help
 	  Select this option if you want to use the OMAP mpu timer. This
 	  timer provides more intra-tick resolution than the 32KHz timer,
@@ -158,6 +155,7 @@ config OMAP_MPU_TIMER
 config OMAP_32K_TIMER
 	bool "Use 32KHz timer"
 	depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS
+	default y if (ARCH_OMAP16XX || ARCH_OMAP2PLUS)
 	help
 	  Select this option if you want to enable the OMAP 32KHz timer.
 	  This timer saves power compared to the OMAP_MPU_TIMER, and has
@@ -165,8 +163,6 @@ config OMAP_32K_TIMER
 	  intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is
 	  currently only available for OMAP16XX, 24XX, 34XX and OMAP4.
 
-endchoice
-
 config OMAP3_L2_AUX_SECURE_SAVE_RESTORE
 	bool "OMAP3 HS/EMU save and restore for L2 AUX control register"
 	depends on ARCH_OMAP3 && PM

arch/arm/plat-omap/counter_32k.c

@@ -36,8 +36,6 @@
 
 #define OMAP16XX_TIMER_32K_SYNCHRONIZED		0xfffbc410
 
-#if !(defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP15XX))
-
 #include <linux/clocksource.h>
 
 /*
@@ -122,12 +120,24 @@ static DEFINE_CLOCK_DATA(cd);
 #define SC_MULT		4000000000u
 #define SC_SHIFT	17
 
-unsigned long long notrace sched_clock(void)
+static inline unsigned long long notrace _omap_32k_sched_clock(void)
 {
 	u32 cyc = clocksource_32k.read(&clocksource_32k);
 	return cyc_to_fixed_sched_clock(&cd, cyc, (u32)~0, SC_MULT, SC_SHIFT);
 }
 
+#ifndef CONFIG_OMAP_MPU_TIMER
+unsigned long long notrace sched_clock(void)
+{
+	return _omap_32k_sched_clock();
+}
+#else
+unsigned long long notrace omap_32k_sched_clock(void)
+{
+	return _omap_32k_sched_clock();
+}
+#endif
+
 static void notrace omap_update_sched_clock(void)
 {
 	u32 cyc = clocksource_32k.read(&clocksource_32k);
@@ -160,7 +170,7 @@ void read_persistent_clock(struct timespec *ts)
 	*ts = *tsp;
 }
 
-static int __init omap_init_clocksource_32k(void)
+int __init omap_init_clocksource_32k(void)
 {
 	static char err[] __initdata = KERN_ERR
 			"%s: can't register clocksource!\n";
@@ -195,7 +205,3 @@ static int __init omap_init_clocksource_32k(void)
 	}
 	return 0;
 }
-arch_initcall(omap_init_clocksource_32k);
-
-#endif	/* !(defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP15XX)) */
-

arch/arm/plat-omap/dma.c

@@ -53,7 +53,7 @@ enum { DMA_CHAIN_STARTED, DMA_CHAIN_NOTSTARTED };
 #endif
 
 #define OMAP_DMA_ACTIVE			0x01
-#define OMAP2_DMA_CSR_CLEAR_MASK	0xffe
+#define OMAP2_DMA_CSR_CLEAR_MASK	0xffffffff
 
 #define OMAP_FUNC_MUX_ARM_BASE		(0xfffe1000 + 0xec)
 
@@ -1873,7 +1873,7 @@ static int omap2_dma_handle_ch(int ch)
 		printk(KERN_INFO "DMA misaligned error with device %d\n",
 		       dma_chan[ch].dev_id);
 
-	p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, ch);
+	p->dma_write(status, CSR, ch);
 	p->dma_write(1 << ch, IRQSTATUS_L0, ch);
 	/* read back the register to flush the write */
 	p->dma_read(IRQSTATUS_L0, ch);
@@ -1893,10 +1893,9 @@ static int omap2_dma_handle_ch(int ch)
 			OMAP_DMA_CHAIN_INCQHEAD(chain_id);
 
 		status = p->dma_read(CSR, ch);
+		p->dma_write(status, CSR, ch);
 	}
 
-	p->dma_write(status, CSR, ch);
-
 	if (likely(dma_chan[ch].callback != NULL))
 		dma_chan[ch].callback(ch, status, dma_chan[ch].data);
 

arch/arm/plat-omap/include/plat/common.h

@@ -35,6 +35,9 @@ struct sys_timer;
 
 extern void omap_map_common_io(void);
 extern struct sys_timer omap_timer;
+extern bool omap_32k_timer_init(void);
+extern int __init omap_init_clocksource_32k(void);
+extern unsigned long long notrace omap_32k_sched_clock(void);
 
 extern void omap_reserve(void);
 

arch/avr32/include/asm/pgalloc.h

@@ -8,6 +8,7 @@
 #ifndef __ASM_AVR32_PGALLOC_H
 #define __ASM_AVR32_PGALLOC_H
 
+#include <linux/mm.h>
 #include <linux/quicklist.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>

arch/m32r/kernel/irq.c

@@ -80,7 +80,7 @@ asmlinkage unsigned int do_IRQ(int irq, struct pt_regs *regs)
 #ifdef CONFIG_DEBUG_STACKOVERFLOW
 	/* FIXME M32R */
 #endif
-	__do_IRQ(irq);
+	generic_handle_irq(irq);
 	irq_exit();
 	set_irq_regs(old_regs);
 

arch/m68k/amiga/config.c

@@ -610,17 +610,17 @@ static void amiga_mem_console_write(struct console *co, const char *s,
 
 static int __init amiga_savekmsg_setup(char *arg)
 {
-	static struct resource debug_res = { .name = "Debug" };
-
 	if (!MACH_IS_AMIGA || strcmp(arg, "mem"))
-		goto done;
+		return 0;
 
-	if (!AMIGAHW_PRESENT(CHIP_RAM)) {
+	if (amiga_chip_size < SAVEKMSG_MAXMEM) {
-		printk("Warning: no chipram present for debugging\n");
+		pr_err("Not enough chipram for debugging\n");
-		goto done;
+		return -ENOMEM;
 	}
 
-	savekmsg = amiga_chip_alloc_res(SAVEKMSG_MAXMEM, &debug_res);
+	/* Just steal the block, the chipram allocator isn't functional yet */
+	amiga_chip_size -= SAVEKMSG_MAXMEM;
+	savekmsg = (void *)ZTWO_VADDR(CHIP_PHYSADDR + amiga_chip_size);
 	savekmsg->magic1 = SAVEKMSG_MAGIC1;
 	savekmsg->magic2 = SAVEKMSG_MAGIC2;
 	savekmsg->magicptr = ZTWO_PADDR(savekmsg);
@@ -628,8 +628,6 @@ static int __init amiga_savekmsg_setup(char *arg)
 
 	amiga_console_driver.write = amiga_mem_console_write;
 	register_console(&amiga_console_driver);
-
-done:
 	return 0;
 }
 

arch/m68k/atari/ataints.c

@@ -388,9 +388,9 @@ void __init atari_init_IRQ(void)
 	}
 
 	if (ATARIHW_PRESENT(SCC) && !atari_SCC_reset_done) {
-		scc.cha_a_ctrl = 9;
+		atari_scc.cha_a_ctrl = 9;
 		MFPDELAY();
-		scc.cha_a_ctrl = (char) 0xc0; /* hardware reset */
+		atari_scc.cha_a_ctrl = (char) 0xc0; /* hardware reset */
 	}
 
 	if (ATARIHW_PRESENT(SCU)) {

arch/m68k/atari/config.c

@@ -315,7 +315,7 @@ void __init config_atari(void)
 		ATARIHW_SET(SCC_DMA);
 		printk("SCC_DMA ");
 	}
-	if (scc_test(&scc.cha_a_ctrl)) {
+	if (scc_test(&atari_scc.cha_a_ctrl)) {
 		ATARIHW_SET(SCC);
 		printk("SCC ");
 	}

arch/m68k/atari/debug.c

@@ -53,9 +53,9 @@ static inline void ata_scc_out(char c)
 {
 	do {
 		MFPDELAY();
-	} while (!(scc.cha_b_ctrl & 0x04)); /* wait for tx buf empty */
+	} while (!(atari_scc.cha_b_ctrl & 0x04)); /* wait for tx buf empty */
 	MFPDELAY();
-	scc.cha_b_data = c;
+	atari_scc.cha_b_data = c;
 }
 
 static void atari_scc_console_write(struct console *co, const char *str,
@@ -140,9 +140,9 @@ int atari_scc_console_wait_key(struct console *co)
 {
 	do {
 		MFPDELAY();
-	} while (!(scc.cha_b_ctrl & 0x01)); /* wait for rx buf filled */
+	} while (!(atari_scc.cha_b_ctrl & 0x01)); /* wait for rx buf filled */
 	MFPDELAY();
-	return scc.cha_b_data;
+	return atari_scc.cha_b_data;
 }
 
 int atari_midi_console_wait_key(struct console *co)
@@ -185,9 +185,9 @@ static void __init atari_init_mfp_port(int cflag)
 
 #define SCC_WRITE(reg, val)				\
 	do {						\
-		scc.cha_b_ctrl = (reg);			\
+		atari_scc.cha_b_ctrl = (reg);		\
 		MFPDELAY();				\
-		scc.cha_b_ctrl = (val);			\
+		atari_scc.cha_b_ctrl = (val);		\
 		MFPDELAY();				\
 	} while (0)
 
@@ -240,7 +240,7 @@ static void __init atari_init_scc_port(int cflag)
 	reg3 = (cflag & CSIZE) == CS8 ? 0xc0 : 0x40;
 	reg5 = (cflag & CSIZE) == CS8 ? 0x60 : 0x20 | 0x82 /* assert DTR/RTS */;
 
-	(void)scc.cha_b_ctrl;		/* reset reg pointer */
+	(void)atari_scc.cha_b_ctrl;	/* reset reg pointer */
 	SCC_WRITE(9, 0xc0);		/* reset */
 	LONG_DELAY();			/* extra delay after WR9 access */
 	SCC_WRITE(4, (cflag & PARENB) ? ((cflag & PARODD) ? 0x01 : 0x03)

arch/m68k/include/asm/atarihw.h

@@ -449,7 +449,7 @@ struct SCC
   u_char char_dummy3;
   u_char cha_b_data;
  };
-# define scc ((*(volatile struct SCC*)SCC_BAS))
+# define atari_scc ((*(volatile struct SCC*)SCC_BAS))
 
 /* The ESCC (Z85230) in an Atari ST. The channels are reversed! */
 # define st_escc ((*(volatile struct SCC*)0xfffffa31))

arch/m68k/include/asm/string.h

@@ -81,18 +81,6 @@ static inline char *strncpy(char *dest, const char *src, size_t n)
 	strcpy(__d + strlen(__d), (s));		\
 })
 
-#define __HAVE_ARCH_STRCHR
-static inline char *strchr(const char *s, int c)
-{
-	char sc, ch = c;
-
-	for (; (sc = *s++) != ch; ) {
-		if (!sc)
-			return NULL;
-	}
-	return (char *)s - 1;
-}
-
 #ifndef CONFIG_COLDFIRE
 #define __HAVE_ARCH_STRCMP
 static inline int strcmp(const char *cs, const char *ct)

arch/microblaze/kernel/head.S

@@ -77,8 +77,18 @@ real_start:
    We ensure r7 points to a valid FDT, just in case the bootloader
    is broken or non-existent */
 	beqi	r7, no_fdt_arg			/* NULL pointer?  don't copy */
-	lw	r11, r0, r7			/* Does r7 point to a */
+/* Does r7 point to a valid FDT? Load HEADER magic number */
-	rsubi	r11, r11, OF_DT_HEADER		/* valid FDT? */
+	/* Run time Big/Little endian platform */
+	/* Save 1 as word and load byte - 0 - BIG, 1 - LITTLE */
+	addik	r11, r0, 0x1 /* BIG/LITTLE checking value */
+	/* __bss_start will be zeroed later - it is just temp location */
+	swi	r11, r0, TOPHYS(__bss_start)
+	lbui	r11, r0, TOPHYS(__bss_start)
+	beqid	r11, big_endian /* DO NOT break delay stop dependency */
+	lw	r11, r0, r7 /* Big endian load in delay slot */
+	lwr	r11, r0, r7 /* Little endian load */
+big_endian:
+	rsubi	r11, r11, OF_DT_HEADER	/* Check FDT header */
 	beqi	r11, _prepare_copy_fdt
 	or	r7, r0, r0		/* clear R7 when not valid DTB */
 	bnei	r11, no_fdt_arg			/* No - get out of here */

arch/microblaze/kernel/hw_exception_handler.S

@@ -147,10 +147,6 @@
 	#if CONFIG_XILINX_MICROBLAZE0_USE_BARREL > 0
 	#define BSRLI(rD, rA, imm)	\
 		bsrli rD, rA, imm
-	#elif CONFIG_XILINX_MICROBLAZE0_USE_DIV > 0
-	#define BSRLI(rD, rA, imm)	\
-		ori rD, r0, (1 << imm);	\
-		idivu rD, rD, rA
 	#else
 	#define BSRLI(rD, rA, imm) BSRLI ## imm (rD, rA)
 	/* Only the used shift constants defined here - add more if needed */

arch/microblaze/lib/fastcopy.S

@@ -29,6 +29,10 @@
  *	between mem locations with size of xfer spec'd in bytes
  */
 
+#ifdef __MICROBLAZEEL__
+#error Microblaze LE not support ASM optimized lib func. Disable OPT_LIB_ASM.
+#endif
+
 #include <linux/linkage.h>
 	.text
 	.globl	memcpy

arch/parisc/kernel/pdc_cons.c

@@ -169,11 +169,11 @@ static int __init pdc_console_tty_driver_init(void)
 
 	struct console *tmp;
 
-	acquire_console_sem();
+	console_lock();
 	for_each_console(tmp)
 		if (tmp == &pdc_cons)
 			break;
-	release_console_sem();
+	console_unlock();
 
 	if (!tmp) {
 		printk(KERN_INFO "PDC console driver not registered anymore, not creating %s\n", pdc_cons.name);

arch/powerpc/kernel/perf_event_fsl_emb.c

@@ -596,6 +596,7 @@ static void record_and_restart(struct perf_event *event, unsigned long val,
 			if (left <= 0)
 				left = period;
 			record = 1;
+			event->hw.last_period = event->hw.sample_period;
 		}
 		if (left < 0x80000000LL)
 			val = 0x80000000LL - left;

arch/s390/Kconfig

@@ -406,7 +406,7 @@ config QDIO
 	  If unsure, say Y.
 
 config CHSC_SCH
-	def_tristate y
+	def_tristate m
 	prompt "Support for CHSC subchannels"
 	help
 	  This driver allows usage of CHSC subchannels. A CHSC subchannel

arch/s390/include/asm/cacheflush.h

@@ -1,29 +1,8 @@
 #ifndef _S390_CACHEFLUSH_H
 #define _S390_CACHEFLUSH_H
 
-/* Keep includes the same across arches.  */
-#include <linux/mm.h>
-
 /* Caches aren't brain-dead on the s390. */
-#define flush_cache_all()			do { } while (0)
+#include <asm-generic/cacheflush.h>
-#define flush_cache_mm(mm)			do { } while (0)
-#define flush_cache_dup_mm(mm)			do { } while (0)
-#define flush_cache_range(vma, start, end)	do { } while (0)
-#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
-#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0
-#define flush_dcache_page(page)			do { } while (0)
-#define flush_dcache_mmap_lock(mapping)		do { } while (0)
-#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
-#define flush_icache_range(start, end)		do { } while (0)
-#define flush_icache_page(vma,pg)		do { } while (0)
-#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
-#define flush_cache_vmap(start, end)		do { } while (0)
-#define flush_cache_vunmap(start, end)		do { } while (0)
-
-#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
-	memcpy(dst, src, len)
-#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
-	memcpy(dst, src, len)
 
 #ifdef CONFIG_DEBUG_PAGEALLOC
 void kernel_map_pages(struct page *page, int numpages, int enable);

arch/s390/include/asm/tlb.h

@@ -22,6 +22,7 @@
  */
 
 #include <linux/mm.h>
+#include <linux/pagemap.h>
 #include <linux/swap.h>
 #include <asm/processor.h>
 #include <asm/pgalloc.h>

arch/s390/lib/uaccess_std.c

@@ -125,9 +125,9 @@ static size_t copy_in_user_std(size_t size, void __user *to,
 	unsigned long tmp1;
 
 	asm volatile(
+		"   sacf  256\n"
 		"  "AHI"  %0,-1\n"
 		"   jo    5f\n"
-		"   sacf  256\n"
 		"   bras  %3,3f\n"
 		"0:"AHI"  %0,257\n"
 		"1: mvc   0(1,%1),0(%2)\n"
@@ -142,9 +142,8 @@ static size_t copy_in_user_std(size_t size, void __user *to,
 		"3:"AHI"  %0,-256\n"
 		"   jnm   2b\n"
 		"4: ex    %0,1b-0b(%3)\n"
-		"   sacf  0\n"
 		"5: "SLR"  %0,%0\n"
-		"6:\n"
+		"6: sacf  0\n"
 		EX_TABLE(1b,6b) EX_TABLE(2b,0b) EX_TABLE(4b,0b)
 		: "+a" (size), "+a" (to), "+a" (from), "=a" (tmp1)
 		: : "cc", "memory");
@@ -156,9 +155,9 @@ static size_t clear_user_std(size_t size, void __user *to)
 	unsigned long tmp1, tmp2;
 
 	asm volatile(
+		"   sacf  256\n"
 		"  "AHI"  %0,-1\n"
 		"   jo    5f\n"
-		"   sacf  256\n"
 		"   bras  %3,3f\n"
 		"   xc    0(1,%1),0(%1)\n"
 		"0:"AHI"  %0,257\n"
@@ -178,9 +177,8 @@ static size_t clear_user_std(size_t size, void __user *to)
 		"3:"AHI"  %0,-256\n"
 		"   jnm   2b\n"
 		"4: ex    %0,0(%3)\n"
-		"   sacf  0\n"
 		"5: "SLR"  %0,%0\n"
-		"6:\n"
+		"6: sacf  0\n"
 		EX_TABLE(1b,6b) EX_TABLE(2b,0b) EX_TABLE(4b,0b)
 		: "+a" (size), "+a" (to), "=a" (tmp1), "=a" (tmp2)
 		: : "cc", "memory");

arch/s390/mm/pgtable.c

@@ -336,7 +336,8 @@ void page_table_free(struct mm_struct *mm, unsigned long *table)
 	page->flags ^= bits;
 	if (page->flags & FRAG_MASK) {
 		/* Page now has some free pgtable fragments. */
-		list_move(&page->lru, &mm->context.pgtable_list);
+		if (!list_empty(&page->lru))
+			list_move(&page->lru, &mm->context.pgtable_list);
 		page = NULL;
 	} else
 		/* All fragments of the 4K page have been freed. */

arch/sh/Kconfig

@@ -15,6 +15,7 @@ config SUPERH
 	select HAVE_KERNEL_GZIP
 	select HAVE_KERNEL_BZIP2
 	select HAVE_KERNEL_LZMA
+	select HAVE_KERNEL_XZ
 	select HAVE_KERNEL_LZO
 	select HAVE_SYSCALL_TRACEPOINTS
 	select HAVE_REGS_AND_STACK_ACCESS_API

arch/sh/Makefile

@@ -200,7 +200,7 @@ endif
 libs-$(CONFIG_SUPERH32)		:= arch/sh/lib/	$(libs-y)
 libs-$(CONFIG_SUPERH64)		:= arch/sh/lib64/ $(libs-y)
 
-BOOT_TARGETS = uImage uImage.bz2 uImage.gz uImage.lzma uImage.lzo \
+BOOT_TARGETS = uImage uImage.bz2 uImage.gz uImage.lzma uImage.xz uImage.lzo \
 	       uImage.srec uImage.bin zImage vmlinux.bin vmlinux.srec \
 	       romImage
 PHONY += $(BOOT_TARGETS)
@@ -230,5 +230,6 @@ define archhelp
 	@echo '* uImage.gz	           - Kernel-only image for U-Boot (gzip)'
 	@echo '  uImage.bz2	           - Kernel-only image for U-Boot (bzip2)'
 	@echo '  uImage.lzma	           - Kernel-only image for U-Boot (lzma)'
+	@echo '  uImage.xz	           - Kernel-only image for U-Boot (xz)'
 	@echo '  uImage.lzo	           - Kernel-only image for U-Boot (lzo)'
 endef

arch/sh/boards/mach-ecovec24/setup.c

@@ -1294,6 +1294,7 @@ static int __init arch_setup(void)
 	i2c_register_board_info(1, i2c1_devices,
 				ARRAY_SIZE(i2c1_devices));
 
+#if defined(CONFIG_VIDEO_SH_VOU) || defined(CONFIG_VIDEO_SH_VOU_MODULE)
 	/* VOU */
 	gpio_request(GPIO_FN_DV_D15, NULL);
 	gpio_request(GPIO_FN_DV_D14, NULL);
@@ -1325,6 +1326,7 @@ static int __init arch_setup(void)
 
 	/* Remove reset */
 	gpio_set_value(GPIO_PTG4, 1);
+#endif
 
 	return platform_add_devices(ecovec_devices,
 				    ARRAY_SIZE(ecovec_devices));

arch/sh/boot/Makefile

@@ -24,12 +24,13 @@ suffix-y := bin
 suffix-$(CONFIG_KERNEL_GZIP)	:= gz
 suffix-$(CONFIG_KERNEL_BZIP2)	:= bz2
 suffix-$(CONFIG_KERNEL_LZMA)	:= lzma
+suffix-$(CONFIG_KERNEL_XZ)	:= xz
 suffix-$(CONFIG_KERNEL_LZO)	:= lzo
 
 targets := zImage vmlinux.srec romImage uImage uImage.srec uImage.gz \
-	   uImage.bz2 uImage.lzma uImage.lzo uImage.bin
+	   uImage.bz2 uImage.lzma uImage.xz uImage.lzo uImage.bin
 extra-y += vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma \
-	   vmlinux.bin.lzo
+	   vmlinux.bin.xz vmlinux.bin.lzo
 subdir- := compressed romimage
 
 $(obj)/zImage: $(obj)/compressed/vmlinux FORCE
@@ -76,6 +77,9 @@ $(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE
 $(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
 	$(call if_changed,lzma)
 
+$(obj)/vmlinux.bin.xz: $(obj)/vmlinux.bin FORCE
+	$(call if_changed,xzkern)
+
 $(obj)/vmlinux.bin.lzo: $(obj)/vmlinux.bin FORCE
 	$(call if_changed,lzo)
 
@@ -88,6 +92,9 @@ $(obj)/uImage.gz: $(obj)/vmlinux.bin.gz
 $(obj)/uImage.lzma: $(obj)/vmlinux.bin.lzma
 	$(call if_changed,uimage,lzma)
 
+$(obj)/uImage.xz: $(obj)/vmlinux.bin.xz
+	$(call if_changed,uimage,xz)
+
 $(obj)/uImage.lzo: $(obj)/vmlinux.bin.lzo
 	$(call if_changed,uimage,lzo)
 

arch/sh/boot/compressed/Makefile

@@ -6,7 +6,7 @@
 
 targets		:= vmlinux vmlinux.bin vmlinux.bin.gz \
 		   vmlinux.bin.bz2 vmlinux.bin.lzma \
-		   vmlinux.bin.lzo \
+		   vmlinux.bin.xz vmlinux.bin.lzo \
 		   head_$(BITS).o misc.o piggy.o
 
 OBJECTS = $(obj)/head_$(BITS).o $(obj)/misc.o $(obj)/cache.o
@@ -50,6 +50,8 @@ $(obj)/vmlinux.bin.bz2: $(vmlinux.bin.all-y) FORCE
 	$(call if_changed,bzip2)
 $(obj)/vmlinux.bin.lzma: $(vmlinux.bin.all-y) FORCE
 	$(call if_changed,lzma)
+$(obj)/vmlinux.bin.xz: $(vmlinux.bin.all-y) FORCE
+	$(call if_changed,xzkern)
 $(obj)/vmlinux.bin.lzo: $(vmlinux.bin.all-y) FORCE
 	$(call if_changed,lzo)
 

arch/sh/boot/compressed/misc.c

@@ -61,6 +61,10 @@ static unsigned long free_mem_end_ptr;
 #include "../../../../lib/decompress_unlzma.c"
 #endif
 
+#ifdef CONFIG_KERNEL_XZ
+#include "../../../../lib/decompress_unxz.c"
+#endif
+
 #ifdef CONFIG_KERNEL_LZO
 #include "../../../../lib/decompress_unlzo.c"
 #endif

arch/sh/include/asm/pgtable.h

@@ -134,6 +134,7 @@ typedef pte_t *pte_addr_t;
 extern void pgtable_cache_init(void);
 
 struct vm_area_struct;
+struct mm_struct;
 
 extern void __update_cache(struct vm_area_struct *vma,
 			   unsigned long address, pte_t pte);

arch/sh/kernel/cpu/sh4/setup-sh7750.c

@@ -230,10 +230,10 @@ static struct platform_device *sh7750_devices[] __initdata = {
 static int __init sh7750_devices_setup(void)
 {
 	if (mach_is_rts7751r2d()) {
-		platform_register_device(&scif_device);
+		platform_device_register(&scif_device);
 	} else {
-		platform_register_device(&sci_device);
+		platform_device_register(&sci_device);
-		platform_register_device(&scif_device);
+		platform_device_register(&scif_device);
 	}
 
 	return platform_add_devices(sh7750_devices,

arch/sh/kernel/topology.c

@@ -17,6 +17,7 @@
 static DEFINE_PER_CPU(struct cpu, cpu_devices);
 
 cpumask_t cpu_core_map[NR_CPUS];
+EXPORT_SYMBOL(cpu_core_map);
 
 static cpumask_t cpu_coregroup_map(unsigned int cpu)
 {

arch/x86/include/asm/cacheflush.h

@@ -1,48 +1,8 @@
 #ifndef _ASM_X86_CACHEFLUSH_H
 #define _ASM_X86_CACHEFLUSH_H
 
-/* Keep includes the same across arches.  */
-#include <linux/mm.h>
-
 /* Caches aren't brain-dead on the intel. */
-static inline void flush_cache_all(void) { }
+#include <asm-generic/cacheflush.h>
-static inline void flush_cache_mm(struct mm_struct *mm) { }
-static inline void flush_cache_dup_mm(struct mm_struct *mm) { }
-static inline void flush_cache_range(struct vm_area_struct *vma,
-				     unsigned long start, unsigned long end) { }
-static inline void flush_cache_page(struct vm_area_struct *vma,
-				    unsigned long vmaddr, unsigned long pfn) { }
-#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0
-static inline void flush_dcache_page(struct page *page) { }
-static inline void flush_dcache_mmap_lock(struct address_space *mapping) { }
-static inline void flush_dcache_mmap_unlock(struct address_space *mapping) { }
-static inline void flush_icache_range(unsigned long start,
-				      unsigned long end) { }
-static inline void flush_icache_page(struct vm_area_struct *vma,
-				     struct page *page) { }
-static inline void flush_icache_user_range(struct vm_area_struct *vma,
-					   struct page *page,
-					   unsigned long addr,
-					   unsigned long len) { }
-static inline void flush_cache_vmap(unsigned long start, unsigned long end) { }
-static inline void flush_cache_vunmap(unsigned long start,
-				      unsigned long end) { }
-
-static inline void copy_to_user_page(struct vm_area_struct *vma,
-				     struct page *page, unsigned long vaddr,
-				     void *dst, const void *src,
-				     unsigned long len)
-{
-	memcpy(dst, src, len);
-}
-
-static inline void copy_from_user_page(struct vm_area_struct *vma,
-				       struct page *page, unsigned long vaddr,
-				       void *dst, const void *src,
-				       unsigned long len)
-{
-	memcpy(dst, src, len);
-}
 
 #ifdef CONFIG_X86_PAT
 /*

arch/x86/include/asm/cpu.h

@@ -32,5 +32,6 @@ extern void arch_unregister_cpu(int);
 
 DECLARE_PER_CPU(int, cpu_state);
 
+int __cpuinit mwait_usable(const struct cpuinfo_x86 *);
 
 #endif /* _ASM_X86_CPU_H */

arch/x86/include/asm/jump_label.h

@@ -14,7 +14,7 @@
 	do {							\
 		asm goto("1:"					\
 			JUMP_LABEL_INITIAL_NOP			\
-			".pushsection __jump_table,  \"a\" \n\t"\
+			".pushsection __jump_table,  \"aw\" \n\t"\
 			_ASM_PTR "1b, %l[" #label "], %c0 \n\t" \
 			".popsection \n\t"			\
 			: :  "i" (key) :  : label);		\

arch/x86/include/asm/mmu_context.h

@@ -36,8 +36,6 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
 	unsigned cpu = smp_processor_id();
 
 	if (likely(prev != next)) {
-		/* stop flush ipis for the previous mm */
-		cpumask_clear_cpu(cpu, mm_cpumask(prev));
 #ifdef CONFIG_SMP
 		percpu_write(cpu_tlbstate.state, TLBSTATE_OK);
 		percpu_write(cpu_tlbstate.active_mm, next);
@@ -47,6 +45,9 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
 		/* Re-load page tables */
 		load_cr3(next->pgd);
 
+		/* stop flush ipis for the previous mm */
+		cpumask_clear_cpu(cpu, mm_cpumask(prev));
+
 		/*
 		 * load the LDT, if the LDT is different:
 		 */

arch/x86/include/asm/paravirt.h

@@ -558,13 +558,12 @@ static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
 static inline void set_pmd_at(struct mm_struct *mm, unsigned long addr,
 			      pmd_t *pmdp, pmd_t pmd)
 {
-#if PAGETABLE_LEVELS >= 3
 	if (sizeof(pmdval_t) > sizeof(long))
 		/* 5 arg words */
 		pv_mmu_ops.set_pmd_at(mm, addr, pmdp, pmd);
 	else
-		PVOP_VCALL4(pv_mmu_ops.set_pmd_at, mm, addr, pmdp, pmd.pmd);
+		PVOP_VCALL4(pv_mmu_ops.set_pmd_at, mm, addr, pmdp,
-#endif
+			    native_pmd_val(pmd));
 }
 #endif
 

arch/x86/include/asm/percpu.h

@@ -273,34 +273,34 @@ do {									\
 	typeof(var) pxo_new__ = (nval);					\
 	switch (sizeof(var)) {						\
 	case 1:								\
-		asm("\n1:mov "__percpu_arg(1)",%%al"			\
+		asm("\n\tmov "__percpu_arg(1)",%%al"			\
-		    "\n\tcmpxchgb %2, "__percpu_arg(1)			\
+		    "\n1:\tcmpxchgb %2, "__percpu_arg(1)		\
 		    "\n\tjnz 1b"					\
-			    : "=a" (pxo_ret__), "+m" (var)		\
+			    : "=&a" (pxo_ret__), "+m" (var)		\
 			    : "q" (pxo_new__)				\
 			    : "memory");				\
 		break;							\
 	case 2:								\
-		asm("\n1:mov "__percpu_arg(1)",%%ax"			\
+		asm("\n\tmov "__percpu_arg(1)",%%ax"			\
-		    "\n\tcmpxchgw %2, "__percpu_arg(1)			\
+		    "\n1:\tcmpxchgw %2, "__percpu_arg(1)		\
 		    "\n\tjnz 1b"					\
-			    : "=a" (pxo_ret__), "+m" (var)		\
+			    : "=&a" (pxo_ret__), "+m" (var)		\
 			    : "r" (pxo_new__)				\
 			    : "memory");				\
 		break;							\
 	case 4:								\
-		asm("\n1:mov "__percpu_arg(1)",%%eax"			\
+		asm("\n\tmov "__percpu_arg(1)",%%eax"			\
-		    "\n\tcmpxchgl %2, "__percpu_arg(1)			\
+		    "\n1:\tcmpxchgl %2, "__percpu_arg(1)		\
 		    "\n\tjnz 1b"					\
-			    : "=a" (pxo_ret__), "+m" (var)		\
+			    : "=&a" (pxo_ret__), "+m" (var)		\
 			    : "r" (pxo_new__)				\
 			    : "memory");				\
 		break;							\
 	case 8:								\
-		asm("\n1:mov "__percpu_arg(1)",%%rax"			\
+		asm("\n\tmov "__percpu_arg(1)",%%rax"			\
-		    "\n\tcmpxchgq %2, "__percpu_arg(1)			\
+		    "\n1:\tcmpxchgq %2, "__percpu_arg(1)		\
 		    "\n\tjnz 1b"					\
-			    : "=a" (pxo_ret__), "+m" (var)		\
+			    : "=&a" (pxo_ret__), "+m" (var)		\
 			    : "r" (pxo_new__)				\
 			    : "memory");				\
 		break;							\

arch/x86/include/asm/system_64.h

@@ -1,22 +0,0 @@
-#ifndef _ASM_X86_SYSTEM_64_H
-#define _ASM_X86_SYSTEM_64_H
-
-#include <asm/segment.h>
-#include <asm/cmpxchg.h>
-
-
-static inline unsigned long read_cr8(void)
-{
-	unsigned long cr8;
-	asm volatile("movq %%cr8,%0" : "=r" (cr8));
-	return cr8;
-}
-
-static inline void write_cr8(unsigned long val)
-{
-	asm volatile("movq %0,%%cr8" :: "r" (val) : "memory");
-}
-
-#include <linux/irqflags.h>
-
-#endif /* _ASM_X86_SYSTEM_64_H */

arch/x86/kernel/cpu/intel_cacheinfo.c

@@ -45,6 +45,7 @@ static const struct _cache_table __cpuinitconst cache_table[] =
 	{ 0x0a, LVL_1_DATA, 8 },	/* 2 way set assoc, 32 byte line size */
 	{ 0x0c, LVL_1_DATA, 16 },	/* 4-way set assoc, 32 byte line size */
 	{ 0x0d, LVL_1_DATA, 16 },	/* 4-way set assoc, 64 byte line size */
+	{ 0x0e, LVL_1_DATA, 24 },	/* 6-way set assoc, 64 byte line size */
 	{ 0x21, LVL_2,      256 },	/* 8-way set assoc, 64 byte line size */
 	{ 0x22, LVL_3,      512 },	/* 4-way set assoc, sectored cache, 64 byte line size */
 	{ 0x23, LVL_3,      MB(1) },	/* 8-way set assoc, sectored cache, 64 byte line size */
@@ -66,6 +67,7 @@ static const struct _cache_table __cpuinitconst cache_table[] =
 	{ 0x45, LVL_2,      MB(2) },	/* 4-way set assoc, 32 byte line size */
 	{ 0x46, LVL_3,      MB(4) },	/* 4-way set assoc, 64 byte line size */
 	{ 0x47, LVL_3,      MB(8) },	/* 8-way set assoc, 64 byte line size */
+	{ 0x48, LVL_2,      MB(3) },	/* 12-way set assoc, 64 byte line size */
 	{ 0x49, LVL_3,      MB(4) },	/* 16-way set assoc, 64 byte line size */
 	{ 0x4a, LVL_3,      MB(6) },	/* 12-way set assoc, 64 byte line size */
 	{ 0x4b, LVL_3,      MB(8) },	/* 16-way set assoc, 64 byte line size */
@@ -87,6 +89,7 @@ static const struct _cache_table __cpuinitconst cache_table[] =
 	{ 0x7c, LVL_2,      MB(1) },	/* 8-way set assoc, sectored cache, 64 byte line size */
 	{ 0x7d, LVL_2,      MB(2) },	/* 8-way set assoc, 64 byte line size */
 	{ 0x7f, LVL_2,      512 },	/* 2-way set assoc, 64 byte line size */
+	{ 0x80, LVL_2,      512 },	/* 8-way set assoc, 64 byte line size */
 	{ 0x82, LVL_2,      256 },	/* 8-way set assoc, 32 byte line size */
 	{ 0x83, LVL_2,      512 },	/* 8-way set assoc, 32 byte line size */
 	{ 0x84, LVL_2,      MB(1) },	/* 8-way set assoc, 32 byte line size */

arch/x86/kernel/cpu/mcheck/therm_throt.c

@@ -59,6 +59,7 @@ struct thermal_state {
 
 /* Callback to handle core threshold interrupts */
 int (*platform_thermal_notify)(__u64 msr_val);
+EXPORT_SYMBOL(platform_thermal_notify);
 
 static DEFINE_PER_CPU(struct thermal_state, thermal_state);
 

arch/x86/kernel/cpu/perf_event_p4.c

@@ -682,7 +682,7 @@ static int p4_validate_raw_event(struct perf_event *event)
 	 * if an event is shared accross the logical threads
 	 * the user needs special permissions to be able to use it
 	 */
-	if (p4_event_bind_map[v].shared) {
+	if (p4_ht_active() && p4_event_bind_map[v].shared) {
 		if (perf_paranoid_cpu() && !capable(CAP_SYS_ADMIN))
 			return -EACCES;
 	}
@@ -727,7 +727,8 @@ static int p4_hw_config(struct perf_event *event)
 		event->hw.config = p4_set_ht_bit(event->hw.config);
 
 	if (event->attr.type == PERF_TYPE_RAW) {
-
+		struct p4_event_bind *bind;
+		unsigned int esel;
 		/*
 		 * Clear bits we reserve to be managed by kernel itself
 		 * and never allowed from a user space
@@ -743,6 +744,13 @@ static int p4_hw_config(struct perf_event *event)
 		 * bits since we keep additional info here (for cache events and etc)
 		 */
 		event->hw.config |= event->attr.config;
+		bind = p4_config_get_bind(event->attr.config);
+		if (!bind) {
+			rc = -EINVAL;
+			goto out;
+		}
+		esel = P4_OPCODE_ESEL(bind->opcode);
+		event->hw.config |= p4_config_pack_cccr(P4_CCCR_ESEL(esel));
 	}
 
 	rc = x86_setup_perfctr(event);

arch/x86/kernel/dumpstack_64.c

@@ -149,13 +149,13 @@ void dump_trace(struct task_struct *task,
 	unsigned used = 0;
 	struct thread_info *tinfo;
 	int graph = 0;
+	unsigned long dummy;
 	unsigned long bp;
 
 	if (!task)
 		task = current;
 
 	if (!stack) {
-		unsigned long dummy;
 		stack = &dummy;
 		if (task && task != current)
 			stack = (unsigned long *)task->thread.sp;

arch/x86/kernel/process.c

@@ -14,6 +14,7 @@
 #include <linux/utsname.h>
 #include <trace/events/power.h>
 #include <linux/hw_breakpoint.h>
+#include <asm/cpu.h>
 #include <asm/system.h>
 #include <asm/apic.h>
 #include <asm/syscalls.h>
@@ -505,7 +506,7 @@ static void poll_idle(void)
 #define MWAIT_ECX_EXTENDED_INFO		0x01
 #define MWAIT_EDX_C1			0xf0
 
-static int __cpuinit mwait_usable(const struct cpuinfo_x86 *c)
+int __cpuinit mwait_usable(const struct cpuinfo_x86 *c)
 {
 	u32 eax, ebx, ecx, edx;