iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

bf609: change ad7877 cs and irq pin

Browse Source 
Extend chip select number supported by spi master as well
because we can accept SPISEL1-SPISEL7 and all GPIO.

Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
This commit is contained in:
Scott Jiang 2012-05-18 16:13:03 -04:00 committed by Bob Liu
parent 28a33cbc24
commit 2cdd700833
1 changed files with 4 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
arch/blackfin/mach-bf609/boards/ezkit.c
View File

@ -981,10 +981,10 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "ad7877",
.platform_data = &bfin_ad7877_ts_info,
.irq = IRQ_PB4, /* old boards (<=Rev 1.3) use IRQ_PJ11 */
.irq = IRQ_PD9,
.max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 2,
.chip_select = 4,
},
#endif
#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
@ -1050,7 +1050,7 @@ static struct resource bfin_spi1_resource[] = {
/* SPI controller data */
static struct bfin6xx_spi_master bf60x_spi_master_info0 = {
.num_chipselect = 4,
.num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS,
.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
};
@ -1065,7 +1065,7 @@ static struct platform_device bf60x_spi_master0 = {
};
static struct bfin6xx_spi_master bf60x_spi_master_info1 = {
.num_chipselect = 4,
.num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS,
.pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0},
};