i.MX fixes for 5.1:

- Correct phy mode setting of imx6dl-yapp4 board to fix a problem
    caused by commit 5ecdd77c61 ("net: dsa: qca8k: disable delay
    for RGMII mode").
  - Add a missing of_node_put call to fix leaked reference detected by
    coccinelle in imx51 machine code.
  - Fix imx6q cpuidle driver bug which causes that CPU might not wake up
    at expected time.
  - Increase reset duration of Ethernet phy Micrel KSZ9031RNX to fix
    transmission timeouts error seen on imx6qdl-phytec-pfla02 board.
  - Correct SPDX License Identifier style for imx6ull-pinfunc-snvs.h.
  - Fix 'bus-witdh' typos in imx6qdl-icore-rqs.dtsi.
  - Correct pseudo PHY address of switch device for imx6dl-yapp4 board.
  - Update PWM driver options in imx defconfig files due to the change
    on driver part.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJclKQNAAoJEFBXWFqHsHzOSugIAJGMo/4tEOijA6oysBhzwE3A
 xy7nHp92RxAZEImjE14NRNgyS6zTZd51PWn3CQjjtw+x+6OBsk4kI+ftQvxp1irg
 7ag6uvjZ5lPaW04tF6bUbI9vZd9+Fsy1z7D/hTzsPPj7w7iH+2rMgWsNwma/ZZ9r
 UFmSfkgxE1kj8sHsnm3EoryKLeu69gD1p+chsWwe4/zxeo+yDeOQuXc1fc05HN5Y
 JOPvHk8PWPDNHwhu8XX20aPGGZpjxi75uhwGDbIQnVCp/k4fDZyDxKfNKcZSrFbK
 JsDxGRIRYd+TXM/E/UJ1TdXsmP6pUoyMXVJi3+0nk0QqLnQqjkdTP2O9MRt+Qng=
 =jCPr
 -----END PGP SIGNATURE-----

Merge tag 'imx-fixes-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes

i.MX fixes for 5.1:
 - Correct phy mode setting of imx6dl-yapp4 board to fix a problem
   caused by commit 5ecdd77c61 ("net: dsa: qca8k: disable delay
   for RGMII mode").
 - Add a missing of_node_put call to fix leaked reference detected by
   coccinelle in imx51 machine code.
 - Fix imx6q cpuidle driver bug which causes that CPU might not wake up
   at expected time.
 - Increase reset duration of Ethernet phy Micrel KSZ9031RNX to fix
   transmission timeouts error seen on imx6qdl-phytec-pfla02 board.
 - Correct SPDX License Identifier style for imx6ull-pinfunc-snvs.h.
 - Fix 'bus-witdh' typos in imx6qdl-icore-rqs.dtsi.
 - Correct pseudo PHY address of switch device for imx6dl-yapp4 board.
 - Update PWM driver options in imx defconfig files due to the change
   on driver part.

* tag 'imx-fixes-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: imx_v4_v5_defconfig: enable PWM driver
  ARM: imx_v6_v7_defconfig: continue compiling the pwm driver
  ARM: dts: imx6dl-yapp4: Use correct pseudo PHY address for the switch
  ARM: dts: imx6qdl: Fix typo in imx6qdl-icore-rqs.dtsi
  ARM: dts: imx6ull: Use the correct style for SPDX License Identifier
  ARM: dts: pfla02: increase phy reset duration
  ARM: imx6q: cpuidle: fix bug that CPU might not wake up at expected time
  ARM: imx51: fix a leaked reference by adding missing of_node_put
  ARM: dts: imx6dl-yapp4: Use rgmii-id phy mode on the cpu port

arch/arm/boot/dts/imx6dl-yapp4-common.dtsi

@@ -114,9 +114,9 @@
 			reg = <2>;
 		};
 
-		switch@0 {
+		switch@10 {
 			compatible = "qca,qca8334";
-			reg = <0>;
+			reg = <10>;
 
 			switch_ports: ports {
 				#address-cells = <1>;
@@ -125,7 +125,7 @@
 				ethphy0: port@0 {
 					reg = <0>;
 					label = "cpu";
-					phy-mode = "rgmii";
+					phy-mode = "rgmii-id";
 					ethernet = <&fec>;
 
 					fixed-link {

arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi

@@ -264,7 +264,7 @@
 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
 	vmcc-supply = <&reg_sd3_vmmc>;
 	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
-	bus-witdh = <4>;
+	bus-width = <4>;
 	no-1-8-v;
 	status = "okay";
 };
@@ -275,7 +275,7 @@
 	pinctrl-1 = <&pinctrl_usdhc4_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc4_200mhz>;
 	vmcc-supply = <&reg_sd4_vmmc>;
-	bus-witdh = <8>;
+	bus-width = <8>;
 	no-1-8-v;
 	non-removable;
 	status = "okay";

arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi

@@ -91,6 +91,7 @@
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-handle = <&ethphy>;
 	phy-mode = "rgmii";
+	phy-reset-duration = <10>; /* in msecs */
 	phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
 	phy-supply = <&vdd_eth_io_reg>;
 	status = "disabled";

arch/arm/boot/dts/imx6ull-pinfunc-snvs.h

@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * Copyright (C) 2016 Freescale Semiconductor, Inc.
  * Copyright (C) 2017 NXP

arch/arm/configs/imx_v4_v5_defconfig

@@ -170,6 +170,9 @@ CONFIG_IMX_SDMA=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_IIO=y
 CONFIG_FSL_MX25_ADC=y
+CONFIG_PWM=y
+CONFIG_PWM_IMX1=y
+CONFIG_PWM_IMX27=y
 CONFIG_EXT4_FS=y
 # CONFIG_DNOTIFY is not set
 CONFIG_VFAT_FS=y

arch/arm/configs/imx_v6_v7_defconfig

@@ -398,7 +398,7 @@ CONFIG_MAG3110=y
 CONFIG_MPL3115=y
 CONFIG_PWM=y
 CONFIG_PWM_FSL_FTM=y
-CONFIG_PWM_IMX=y
+CONFIG_PWM_IMX27=y
 CONFIG_NVMEM_IMX_OCOTP=y
 CONFIG_NVMEM_VF610_OCOTP=y
 CONFIG_TEE=y

arch/arm/mach-imx/cpuidle-imx6q.c

@@ -16,30 +16,23 @@
 #include "cpuidle.h"
 #include "hardware.h"
 
-static atomic_t master = ATOMIC_INIT(0);
-static DEFINE_SPINLOCK(master_lock);
+static int num_idle_cpus = 0;
+static DEFINE_SPINLOCK(cpuidle_lock);
 
 static int imx6q_enter_wait(struct cpuidle_device *dev,
 			    struct cpuidle_driver *drv, int index)
 {
-	if (atomic_inc_return(&master) == num_online_cpus()) {
-		/*
-		 * With this lock, we prevent other cpu to exit and enter
-		 * this function again and become the master.
-		 */
-		if (!spin_trylock(&master_lock))
-			goto idle;
+	spin_lock(&cpuidle_lock);
+	if (++num_idle_cpus == num_online_cpus())
 		imx6_set_lpm(WAIT_UNCLOCKED);
-		cpu_do_idle();
-		imx6_set_lpm(WAIT_CLOCKED);
-		spin_unlock(&master_lock);
-		goto done;
-	}
+	spin_unlock(&cpuidle_lock);
 
-idle:
 	cpu_do_idle();
-done:
-	atomic_dec(&master);
+
+	spin_lock(&cpuidle_lock);
+	if (num_idle_cpus-- == num_online_cpus())
+		imx6_set_lpm(WAIT_CLOCKED);
+	spin_unlock(&cpuidle_lock);
 
 	return index;
 }

arch/arm/mach-imx/mach-imx51.c

@@ -59,6 +59,7 @@ static void __init imx51_m4if_setup(void)
 		return;
 
 	m4if_base = of_iomap(np, 0);
+	of_node_put(np);
 	if (!m4if_base) {
 		pr_err("Unable to map M4IF registers\n");
 		return;