phy: Add MIPI D-PHY configuration options

Now that we have some infrastructure for it, allow the MIPI D-PHY phy's to
be configured through the generic functions through a custom structure
added to the generic union.

The parameters added here are the ones defined in the MIPI D-PHY spec, plus
the number of lanes in use. The current set of parameters should cover all
the potential users.

Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

include/linux/phy/phy-mipi-dphy.h

@@ -0,0 +1,279 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2018 Cadence Design Systems Inc.
+ */
+
+#ifndef __PHY_MIPI_DPHY_H_
+#define __PHY_MIPI_DPHY_H_
+
+#include <video/videomode.h>
+
+/**
+ * struct phy_configure_opts_mipi_dphy - MIPI D-PHY configuration set
+ *
+ * This structure is used to represent the configuration state of a
+ * MIPI D-PHY phy.
+ */
+struct phy_configure_opts_mipi_dphy {
+	/**
+	 * @clk_miss:
+	 *
+	 * Timeout, in picoseconds, for receiver to detect absence of
+	 * Clock transitions and disable the Clock Lane HS-RX.
+	 *
+	 * Maximum value: 60000 ps
+	 */
+	unsigned int		clk_miss;
+
+	/**
+	 * @clk_post:
+	 *
+	 * Time, in picoseconds, that the transmitter continues to
+	 * send HS clock after the last associated Data Lane has
+	 * transitioned to LP Mode. Interval is defined as the period
+	 * from the end of @hs_trail to the beginning of @clk_trail.
+	 *
+	 * Minimum value: 60000 ps + 52 * @hs_clk_rate period in ps
+	 */
+	unsigned int		clk_post;
+
+	/**
+	 * @clk_pre:
+	 *
+	 * Time, in UI, that the HS clock shall be driven by
+	 * the transmitter prior to any associated Data Lane beginning
+	 * the transition from LP to HS mode.
+	 *
+	 * Minimum value: 8 UI
+	 */
+	unsigned int		clk_pre;
+
+	/**
+	 * @clk_prepare:
+	 *
+	 * Time, in picoseconds, that the transmitter drives the Clock
+	 * Lane LP-00 Line state immediately before the HS-0 Line
+	 * state starting the HS transmission.
+	 *
+	 * Minimum value: 38000 ps
+	 * Maximum value: 95000 ps
+	 */
+	unsigned int		clk_prepare;
+
+	/**
+	 * @clk_settle:
+	 *
+	 * Time interval, in picoseconds, during which the HS receiver
+	 * should ignore any Clock Lane HS transitions, starting from
+	 * the beginning of @clk_prepare.
+	 *
+	 * Minimum value: 95000 ps
+	 * Maximum value: 300000 ps
+	 */
+	unsigned int		clk_settle;
+
+	/**
+	 * @clk_term_en:
+	 *
+	 * Time, in picoseconds, for the Clock Lane receiver to enable
+	 * the HS line termination.
+	 *
+	 * Maximum value: 38000 ps
+	 */
+	unsigned int		clk_term_en;
+
+	/**
+	 * @clk_trail:
+	 *
+	 * Time, in picoseconds, that the transmitter drives the HS-0
+	 * state after the last payload clock bit of a HS transmission
+	 * burst.
+	 *
+	 * Minimum value: 60000 ps
+	 */
+	unsigned int		clk_trail;
+
+	/**
+	 * @clk_zero:
+	 *
+	 * Time, in picoseconds, that the transmitter drives the HS-0
+	 * state prior to starting the Clock.
+	 */
+	unsigned int		clk_zero;
+
+	/**
+	 * @d_term_en:
+	 *
+	 * Time, in picoseconds, for the Data Lane receiver to enable
+	 * the HS line termination.
+	 *
+	 * Maximum value: 35000 ps + 4 * @hs_clk_rate period in ps
+	 */
+	unsigned int		d_term_en;
+
+	/**
+	 * @eot:
+	 *
+	 * Transmitted time interval, in picoseconds, from the start
+	 * of @hs_trail or @clk_trail, to the start of the LP- 11
+	 * state following a HS burst.
+	 *
+	 * Maximum value: 105000 ps + 12 * @hs_clk_rate period in ps
+	 */
+	unsigned int		eot;
+
+	/**
+	 * @hs_exit:
+	 *
+	 * Time, in picoseconds, that the transmitter drives LP-11
+	 * following a HS burst.
+	 *
+	 * Minimum value: 100000 ps
+	 */
+	unsigned int		hs_exit;
+
+	/**
+	 * @hs_prepare:
+	 *
+	 * Time, in picoseconds, that the transmitter drives the Data
+	 * Lane LP-00 Line state immediately before the HS-0 Line
+	 * state starting the HS transmission.
+	 *
+	 * Minimum value: 40000 ps + 4 * @hs_clk_rate period in ps
+	 * Maximum value: 85000 ps + 6 * @hs_clk_rate period in ps
+	 */
+	unsigned int		hs_prepare;
+
+	/**
+	 * @hs_settle:
+	 *
+	 * Time interval, in picoseconds, during which the HS receiver
+	 * shall ignore any Data Lane HS transitions, starting from
+	 * the beginning of @hs_prepare.
+	 *
+	 * Minimum value: 85000 ps + 6 * @hs_clk_rate period in ps
+	 * Maximum value: 145000 ps + 10 * @hs_clk_rate period in ps
+	 */
+	unsigned int		hs_settle;
+
+	/**
+	 * @hs_skip:
+	 *
+	 * Time interval, in picoseconds, during which the HS-RX
+	 * should ignore any transitions on the Data Lane, following a
+	 * HS burst. The end point of the interval is defined as the
+	 * beginning of the LP-11 state following the HS burst.
+	 *
+	 * Minimum value: 40000 ps
+	 * Maximum value: 55000 ps + 4 * @hs_clk_rate period in ps
+	 */
+	unsigned int		hs_skip;
+
+	/**
+	 * @hs_trail:
+	 *
+	 * Time, in picoseconds, that the transmitter drives the
+	 * flipped differential state after last payload data bit of a
+	 * HS transmission burst
+	 *
+	 * Minimum value: max(8 * @hs_clk_rate period in ps,
+	 *		      60000 ps + 4 * @hs_clk_rate period in ps)
+	 */
+	unsigned int		hs_trail;
+
+	/**
+	 * @hs_zero:
+	 *
+	 * Time, in picoseconds, that the transmitter drives the HS-0
+	 * state prior to transmitting the Sync sequence.
+	 */
+	unsigned int		hs_zero;
+
+	/**
+	 * @init:
+	 *
+	 * Time, in picoseconds for the initialization period to
+	 * complete.
+	 *
+	 * Minimum value: 100000000 ps
+	 */
+	unsigned int		init;
+
+	/**
+	 * @lpx:
+	 *
+	 * Transmitted length, in picoseconds, of any Low-Power state
+	 * period.
+	 *
+	 * Minimum value: 50000 ps
+	 */
+	unsigned int		lpx;
+
+	/**
+	 * @ta_get:
+	 *
+	 * Time, in picoseconds, that the new transmitter drives the
+	 * Bridge state (LP-00) after accepting control during a Link
+	 * Turnaround.
+	 *
+	 * Value: 5 * @lpx
+	 */
+	unsigned int		ta_get;
+
+	/**
+	 * @ta_go:
+	 *
+	 * Time, in picoseconds, that the transmitter drives the
+	 * Bridge state (LP-00) before releasing control during a Link
+	 * Turnaround.
+	 *
+	 * Value: 4 * @lpx
+	 */
+	unsigned int		ta_go;
+
+	/**
+	 * @ta_sure:
+	 *
+	 * Time, in picoseconds, that the new transmitter waits after
+	 * the LP-10 state before transmitting the Bridge state
+	 * (LP-00) during a Link Turnaround.
+	 *
+	 * Minimum value: @lpx
+	 * Maximum value: 2 * @lpx
+	 */
+	unsigned int		ta_sure;
+
+	/**
+	 * @wakeup:
+	 *
+	 * Time, in picoseconds, that a transmitter drives a Mark-1
+	 * state prior to a Stop state in order to initiate an exit
+	 * from ULPS.
+	 *
+	 * Minimum value: 1000000000 ps
+	 */
+	unsigned int		wakeup;
+
+	/**
+	 * @hs_clk_rate:
+	 *
+	 * Clock rate, in Hertz, of the high-speed clock.
+	 */
+	unsigned long		hs_clk_rate;
+
+	/**
+	 * @lp_clk_rate:
+	 *
+	 * Clock rate, in Hertz, of the low-power clock.
+	 */
+	unsigned long		lp_clk_rate;
+
+	/**
+	 * @lanes:
+	 *
+	 * Number of active data lanes used for the transmissions.
+	 */
+	unsigned char		lanes;
+};
+
+#endif /* __PHY_MIPI_DPHY_H_ */

include/linux/phy/phy.h

@@ -20,6 +20,8 @@
 #include <linux/pm_runtime.h>
 #include <linux/regulator/consumer.h>
 
+#include <linux/phy/phy-mipi-dphy.h>
+
 struct phy;
 
 enum phy_mode {
@@ -44,8 +46,12 @@ enum phy_mode {
 
 /**
  * union phy_configure_opts - Opaque generic phy configuration
+ *
+ * @mipi_dphy:	Configuration set applicable for phys supporting
+ *		the MIPI_DPHY phy mode.
  */
 union phy_configure_opts {
+	struct phy_configure_opts_mipi_dphy	mipi_dphy;
 };
 
 /**