ARM: dts: stm32: add sdmmc2 pins for STM32MP13

Those pins are used for SDIO on STM32MP135F-DK board.

Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
This commit is contained in:
Yann Gautier 2022-01-12 17:33:56 +01:00 committed by Alexandre Torgue
parent a7f6433fed
commit 2f715efc19

View File

@ -57,6 +57,57 @@
};
};
sdmmc2_b4_pins_a: sdmmc2-b4-0 {
pins {
pinmux = <STM32_PINMUX('B', 14, AF10)>, /* SDMMC2_D0 */
<STM32_PINMUX('B', 15, AF10)>, /* SDMMC2_D1 */
<STM32_PINMUX('B', 3, AF10)>, /* SDMMC2_D2 */
<STM32_PINMUX('B', 4, AF10)>, /* SDMMC2_D3 */
<STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
slew-rate = <1>;
drive-push-pull;
bias-pull-up;
};
};
sdmmc2_b4_od_pins_a: sdmmc2-b4-od-0 {
pins1 {
pinmux = <STM32_PINMUX('B', 14, AF10)>, /* SDMMC2_D0 */
<STM32_PINMUX('B', 15, AF10)>, /* SDMMC2_D1 */
<STM32_PINMUX('B', 3, AF10)>, /* SDMMC2_D2 */
<STM32_PINMUX('B', 4, AF10)>; /* SDMMC2_D3 */
slew-rate = <1>;
drive-push-pull;
bias-pull-up;
};
pins2 {
pinmux = <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
slew-rate = <1>;
drive-open-drain;
bias-pull-up;
};
};
sdmmc2_b4_sleep_pins_a: sdmmc2-b4-sleep-0 {
pins {
pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */
<STM32_PINMUX('B', 15, ANALOG)>, /* SDMMC2_D1 */
<STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC2_D2 */
<STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC2_D3 */
<STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC2_CK */
<STM32_PINMUX('G', 6, ANALOG)>; /* SDMMC2_CMD */
};
};
sdmmc2_clk_pins_a: sdmmc2-clk-0 {
pins {
pinmux = <STM32_PINMUX('E', 3, AF10)>; /* SDMMC2_CK */
slew-rate = <1>;
drive-push-pull;
bias-pull-up;
};
};
uart4_pins_a: uart4-0 {
pins1 {
pinmux = <STM32_PINMUX('D', 6, AF8)>; /* UART4_TX */