iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

mtd: rawnand: arasan: Fix clock rate in NV-DDR

Browse Source 
commit e16eceea863b417fd328588b1be1a79de0bc937f upstream.

According to the Arasan NAND controller spec, the flash clock rate for SDR
must be <= 100 MHz, while for NV-DDR it must be the same as the rate of the
CLK line for the mode. The driver previously always set 100 MHz for NV-DDR,
which would result in incorrect behavior for NV-DDR modes 0-4.

The appropriate clock rate can be calculated from the NV-DDR timing
parameters as 1/tCK, or for rates measured in picoseconds,
10^12 / nand_nvddr_timings->tCK_min.

Fixes: 197b88fecc50 ("mtd: rawnand: arasan: Add new Arasan NAND controller")
CC: stable@vger.kernel.org # 5.8+
Signed-off-by: Olga Kitaina <okitain@gmail.com>
Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220628154824.12222-3-amit.kumar-mahapatra@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Olga Kitaina 2022-06-28 21:18:24 +05:30 committed by Greg Kroah-Hartman
parent 89f3a8bbb4
commit 2ffe64acf7
1 changed files with 7 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
drivers/mtd/nand/raw/arasan-nand-controller.c
View File

@ -1043,7 +1043,13 @@ static int anfc_setup_interface(struct nand_chip *chip, int target,
DQS_BUFF_SEL_OUT(dqs_mode);
}
anand->clk = ANFC_XLNX_SDR_DFLT_CORE_CLK;
if (nand_interface_is_sdr(conf)) {
anand->clk = ANFC_XLNX_SDR_DFLT_CORE_CLK;
} else {
/* ONFI timings are defined in picoseconds */
anand->clk = div_u64((u64)NSEC_PER_SEC * 1000,
conf->timings.nvddr.tCK_min);
}
/*
* Due to a hardware bug in the ZynqMP SoC, SDR timing modes 0-1 work