[PATCH] libata: interrupt driven pio for libata-core
- add PIO_ST_FIRST for the state before sending ATAPI CDB or sending "ATA PIO data out" first data block. - add ATA_TFLAG_POLLING and ATA_DFLAG_CDB_INTR flags - remove the ATA_FLAG_NOINTR flag since the interrupt handler is now aware of the states - modify ata_pio_sector() and atapi_pio_bytes() to work in the interrupt context - modify the ata_host_intr() to handle PIO interrupts - modify ata_qc_issue_prot() to initialize states - atapi_packet_task() changed to handle "ATA PIO data out" first data block - support the pre-ATA4 ATAPI device which raise interrupt when ready to receive CDB Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
This commit is contained in:
parent
14be71f4c5
commit
312f7da282
@ -1292,6 +1292,9 @@ retry:
|
||||
ap->cdb_len = (unsigned int) rc;
|
||||
ap->host->max_cmd_len = (unsigned char) ap->cdb_len;
|
||||
|
||||
if (ata_id_cdb_intr(dev->id))
|
||||
dev->flags |= ATA_DFLAG_CDB_INTR;
|
||||
|
||||
/* print device info to dmesg */
|
||||
printk(KERN_INFO "ata%u: dev %u ATAPI, max %s\n",
|
||||
ap->id, device,
|
||||
@ -2405,7 +2408,6 @@ void ata_poll_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat)
|
||||
unsigned long flags;
|
||||
|
||||
spin_lock_irqsave(&ap->host_set->lock, flags);
|
||||
ap->flags &= ~ATA_FLAG_NOINTR;
|
||||
ata_irq_on(ap);
|
||||
ata_qc_complete(qc, drv_stat);
|
||||
spin_unlock_irqrestore(&ap->host_set->lock, flags);
|
||||
@ -2660,6 +2662,7 @@ static void ata_pio_sector(struct ata_queued_cmd *qc)
|
||||
struct page *page;
|
||||
unsigned int offset;
|
||||
unsigned char *buf;
|
||||
unsigned long flags;
|
||||
|
||||
if (qc->cursect == (qc->nsect - 1))
|
||||
ap->hsm_task_state = HSM_ST_LAST;
|
||||
@ -2671,7 +2674,8 @@ static void ata_pio_sector(struct ata_queued_cmd *qc)
|
||||
page = nth_page(page, (offset >> PAGE_SHIFT));
|
||||
offset %= PAGE_SIZE;
|
||||
|
||||
buf = kmap(page) + offset;
|
||||
local_irq_save(flags);
|
||||
buf = kmap_atomic(page, KM_IRQ0) + offset;
|
||||
|
||||
qc->cursect++;
|
||||
qc->cursg_ofs++;
|
||||
@ -2687,7 +2691,8 @@ static void ata_pio_sector(struct ata_queued_cmd *qc)
|
||||
do_write = (qc->tf.flags & ATA_TFLAG_WRITE);
|
||||
ata_data_xfer(ap, buf, ATA_SECT_SIZE, do_write);
|
||||
|
||||
kunmap(page);
|
||||
kunmap_atomic(buf - offset, KM_IRQ0);
|
||||
local_irq_restore(flags);
|
||||
}
|
||||
|
||||
/**
|
||||
@ -2710,6 +2715,7 @@ static void __atapi_pio_bytes(struct ata_queued_cmd *qc, unsigned int bytes)
|
||||
struct page *page;
|
||||
unsigned char *buf;
|
||||
unsigned int offset, count;
|
||||
unsigned long flags;
|
||||
|
||||
if (qc->curbytes + bytes >= qc->nbytes)
|
||||
ap->hsm_task_state = HSM_ST_LAST;
|
||||
@ -2753,7 +2759,8 @@ next_sg:
|
||||
/* don't cross page boundaries */
|
||||
count = min(count, (unsigned int)PAGE_SIZE - offset);
|
||||
|
||||
buf = kmap(page) + offset;
|
||||
local_irq_save(flags);
|
||||
buf = kmap_atomic(page, KM_IRQ0) + offset;
|
||||
|
||||
bytes -= count;
|
||||
qc->curbytes += count;
|
||||
@ -2769,7 +2776,8 @@ next_sg:
|
||||
/* do the actual data transfer */
|
||||
ata_data_xfer(ap, buf, count, do_write);
|
||||
|
||||
kunmap(page);
|
||||
kunmap_atomic(buf - offset, KM_IRQ0);
|
||||
local_irq_restore(flags);
|
||||
|
||||
if (bytes)
|
||||
goto next_sg;
|
||||
@ -2808,6 +2816,8 @@ static void atapi_pio_bytes(struct ata_queued_cmd *qc)
|
||||
if (do_write != i_write)
|
||||
goto err_out;
|
||||
|
||||
VPRINTK("ata%u: xfering %d bytes\n", ap->id, bytes);
|
||||
|
||||
__atapi_pio_bytes(qc, bytes);
|
||||
|
||||
return;
|
||||
@ -3054,6 +3064,8 @@ static void ata_qc_timeout(struct ata_queued_cmd *qc)
|
||||
printk(KERN_ERR "ata%u: command 0x%x timeout, stat 0x%x host_stat 0x%x\n",
|
||||
ap->id, qc->tf.command, drv_stat, host_stat);
|
||||
|
||||
ap->hsm_task_state = HSM_ST_IDLE;
|
||||
|
||||
/* complete taskfile transaction */
|
||||
ata_qc_complete(qc, drv_stat);
|
||||
break;
|
||||
@ -3344,42 +3356,95 @@ int ata_qc_issue_prot(struct ata_queued_cmd *qc)
|
||||
{
|
||||
struct ata_port *ap = qc->ap;
|
||||
|
||||
/* select the device */
|
||||
ata_dev_select(ap, qc->dev->devno, 1, 0);
|
||||
|
||||
/* start the command */
|
||||
switch (qc->tf.protocol) {
|
||||
case ATA_PROT_NODATA:
|
||||
if (qc->tf.flags & ATA_TFLAG_POLLING)
|
||||
ata_qc_set_polling(qc);
|
||||
|
||||
ata_tf_to_host_nolock(ap, &qc->tf);
|
||||
ap->hsm_task_state = HSM_ST_LAST;
|
||||
|
||||
if (qc->tf.flags & ATA_TFLAG_POLLING)
|
||||
queue_work(ata_wq, &ap->pio_task);
|
||||
|
||||
break;
|
||||
|
||||
case ATA_PROT_DMA:
|
||||
assert(!(qc->tf.flags & ATA_TFLAG_POLLING));
|
||||
|
||||
ap->ops->tf_load(ap, &qc->tf); /* load tf registers */
|
||||
ap->ops->bmdma_setup(qc); /* set up bmdma */
|
||||
ap->ops->bmdma_start(qc); /* initiate bmdma */
|
||||
ap->hsm_task_state = HSM_ST_LAST;
|
||||
break;
|
||||
|
||||
case ATA_PROT_PIO: /* load tf registers, initiate polling pio */
|
||||
case ATA_PROT_PIO:
|
||||
if (qc->tf.flags & ATA_TFLAG_POLLING)
|
||||
ata_qc_set_polling(qc);
|
||||
|
||||
ata_tf_to_host_nolock(ap, &qc->tf);
|
||||
|
||||
if (qc->tf.flags & ATA_TFLAG_POLLING) {
|
||||
/* polling PIO */
|
||||
ap->hsm_task_state = HSM_ST;
|
||||
queue_work(ata_wq, &ap->pio_task);
|
||||
} else {
|
||||
/* interrupt driven PIO */
|
||||
if (qc->tf.flags & ATA_TFLAG_WRITE) {
|
||||
/* PIO data out protocol */
|
||||
ap->hsm_task_state = HSM_ST_FIRST;
|
||||
queue_work(ata_wq, &ap->packet_task);
|
||||
|
||||
/* send first data block by polling */
|
||||
} else {
|
||||
/* PIO data in protocol */
|
||||
ap->hsm_task_state = HSM_ST;
|
||||
|
||||
/* interrupt handler takes over from here */
|
||||
}
|
||||
}
|
||||
|
||||
break;
|
||||
|
||||
case ATA_PROT_ATAPI:
|
||||
if (qc->tf.flags & ATA_TFLAG_POLLING)
|
||||
ata_qc_set_polling(qc);
|
||||
|
||||
ata_tf_to_host_nolock(ap, &qc->tf);
|
||||
ap->hsm_task_state = HSM_ST_FIRST;
|
||||
|
||||
/* send cdb by polling if no cdb interrupt */
|
||||
if ((!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) ||
|
||||
(qc->tf.flags & ATA_TFLAG_POLLING))
|
||||
queue_work(ata_wq, &ap->packet_task);
|
||||
break;
|
||||
|
||||
case ATA_PROT_ATAPI_NODATA:
|
||||
ap->flags |= ATA_FLAG_NOINTR;
|
||||
if (qc->tf.flags & ATA_TFLAG_POLLING)
|
||||
ata_qc_set_polling(qc);
|
||||
|
||||
ata_tf_to_host_nolock(ap, &qc->tf);
|
||||
ap->hsm_task_state = HSM_ST_FIRST;
|
||||
|
||||
/* send cdb by polling if no cdb interrupt */
|
||||
if ((!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) ||
|
||||
(qc->tf.flags & ATA_TFLAG_POLLING))
|
||||
queue_work(ata_wq, &ap->packet_task);
|
||||
break;
|
||||
|
||||
case ATA_PROT_ATAPI_DMA:
|
||||
ap->flags |= ATA_FLAG_NOINTR;
|
||||
assert(!(qc->tf.flags & ATA_TFLAG_POLLING));
|
||||
|
||||
ap->ops->tf_load(ap, &qc->tf); /* load tf registers */
|
||||
ap->ops->bmdma_setup(qc); /* set up bmdma */
|
||||
ap->hsm_task_state = HSM_ST_FIRST;
|
||||
|
||||
/* send cdb by polling if no cdb interrupt */
|
||||
if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR))
|
||||
queue_work(ata_wq, &ap->packet_task);
|
||||
break;
|
||||
|
||||
@ -3622,6 +3687,42 @@ void ata_bmdma_stop(struct ata_queued_cmd *qc)
|
||||
ata_altstatus(ap); /* dummy read */
|
||||
}
|
||||
|
||||
/**
|
||||
* atapi_send_cdb - Write CDB bytes to hardware
|
||||
* @ap: Port to which ATAPI device is attached.
|
||||
* @qc: Taskfile currently active
|
||||
*
|
||||
* When device has indicated its readiness to accept
|
||||
* a CDB, this function is called. Send the CDB.
|
||||
*
|
||||
* LOCKING:
|
||||
* caller.
|
||||
*/
|
||||
|
||||
static void atapi_send_cdb(struct ata_port *ap, struct ata_queued_cmd *qc)
|
||||
{
|
||||
/* send SCSI cdb */
|
||||
DPRINTK("send cdb\n");
|
||||
assert(ap->cdb_len >= 12);
|
||||
|
||||
ata_data_xfer(ap, qc->cdb, ap->cdb_len, 1);
|
||||
ata_altstatus(ap); /* flush */
|
||||
|
||||
switch (qc->tf.protocol) {
|
||||
case ATA_PROT_ATAPI:
|
||||
ap->hsm_task_state = HSM_ST;
|
||||
break;
|
||||
case ATA_PROT_ATAPI_NODATA:
|
||||
ap->hsm_task_state = HSM_ST_LAST;
|
||||
break;
|
||||
case ATA_PROT_ATAPI_DMA:
|
||||
ap->hsm_task_state = HSM_ST_LAST;
|
||||
/* initiate bmdma */
|
||||
ap->ops->bmdma_start(qc);
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* ata_host_intr - Handle host interrupt for given (port, task)
|
||||
* @ap: Port on which interrupt arrived (possibly...)
|
||||
@ -3641,13 +3742,24 @@ void ata_bmdma_stop(struct ata_queued_cmd *qc)
|
||||
inline unsigned int ata_host_intr (struct ata_port *ap,
|
||||
struct ata_queued_cmd *qc)
|
||||
{
|
||||
u8 status, host_stat;
|
||||
u8 status, host_stat = 0;
|
||||
|
||||
switch (qc->tf.protocol) {
|
||||
VPRINTK("ata%u: protocol %d task_state %d\n",
|
||||
ap->id, qc->tf.protocol, ap->hsm_task_state);
|
||||
|
||||
case ATA_PROT_DMA:
|
||||
case ATA_PROT_ATAPI_DMA:
|
||||
case ATA_PROT_ATAPI:
|
||||
/* Check whether we are expecting interrupt in this state */
|
||||
switch (ap->hsm_task_state) {
|
||||
case HSM_ST_FIRST:
|
||||
/* Check the ATA_DFLAG_CDB_INTR flag is enough here.
|
||||
* The flag was turned on only for atapi devices.
|
||||
* No need to check is_atapi_taskfile(&qc->tf) again.
|
||||
*/
|
||||
if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR))
|
||||
goto idle_irq;
|
||||
break;
|
||||
case HSM_ST_LAST:
|
||||
if (qc->tf.protocol == ATA_PROT_DMA ||
|
||||
qc->tf.protocol == ATA_PROT_ATAPI_DMA) {
|
||||
/* check status of DMA engine */
|
||||
host_stat = ap->ops->bmdma_status(ap);
|
||||
VPRINTK("ata%u: host_stat 0x%X\n", ap->id, host_stat);
|
||||
@ -3658,11 +3770,14 @@ inline unsigned int ata_host_intr (struct ata_port *ap,
|
||||
|
||||
/* before we do anything else, clear DMA-Start bit */
|
||||
ap->ops->bmdma_stop(qc);
|
||||
}
|
||||
break;
|
||||
case HSM_ST:
|
||||
break;
|
||||
default:
|
||||
goto idle_irq;
|
||||
}
|
||||
|
||||
/* fall through */
|
||||
|
||||
case ATA_PROT_ATAPI_NODATA:
|
||||
case ATA_PROT_NODATA:
|
||||
/* check altstatus */
|
||||
status = ata_altstatus(ap);
|
||||
if (status & ATA_BUSY)
|
||||
@ -3672,16 +3787,97 @@ inline unsigned int ata_host_intr (struct ata_port *ap,
|
||||
status = ata_chk_status(ap);
|
||||
if (unlikely(status & ATA_BUSY))
|
||||
goto idle_irq;
|
||||
DPRINTK("ata%u: protocol %d (dev_stat 0x%X)\n",
|
||||
ap->id, qc->tf.protocol, status);
|
||||
|
||||
DPRINTK("ata%u: protocol %d task_state %d (dev_stat 0x%X)\n",
|
||||
ap->id, qc->tf.protocol, ap->hsm_task_state, status);
|
||||
|
||||
/* ack bmdma irq events */
|
||||
ap->ops->irq_clear(ap);
|
||||
|
||||
/* check error */
|
||||
if (unlikely((status & ATA_ERR) || (host_stat & ATA_DMA_ERR)))
|
||||
ap->hsm_task_state = HSM_ST_ERR;
|
||||
|
||||
fsm_start:
|
||||
switch (ap->hsm_task_state) {
|
||||
case HSM_ST_FIRST:
|
||||
/* Some pre-ATAPI-4 devices assert INTRQ
|
||||
* at this state when ready to receive CDB.
|
||||
*/
|
||||
|
||||
/* check device status */
|
||||
if (unlikely((status & (ATA_BUSY | ATA_DRQ)) != ATA_DRQ)) {
|
||||
/* Wrong status. Let EH handle this */
|
||||
ap->hsm_task_state = HSM_ST_ERR;
|
||||
goto fsm_start;
|
||||
}
|
||||
|
||||
atapi_send_cdb(ap, qc);
|
||||
|
||||
break;
|
||||
|
||||
case HSM_ST:
|
||||
/* complete command or read/write the data register */
|
||||
if (qc->tf.protocol == ATA_PROT_ATAPI) {
|
||||
/* ATAPI PIO protocol */
|
||||
if ((status & ATA_DRQ) == 0) {
|
||||
/* no more data to transfer */
|
||||
ap->hsm_task_state = HSM_ST_LAST;
|
||||
goto fsm_start;
|
||||
}
|
||||
|
||||
atapi_pio_bytes(qc);
|
||||
|
||||
if (unlikely(ap->hsm_task_state == HSM_ST_ERR))
|
||||
/* bad ireason reported by device */
|
||||
goto fsm_start;
|
||||
|
||||
} else {
|
||||
/* ATA PIO protocol */
|
||||
if (unlikely((status & ATA_DRQ) == 0)) {
|
||||
/* handle BSY=0, DRQ=0 as error */
|
||||
ap->hsm_task_state = HSM_ST_ERR;
|
||||
goto fsm_start;
|
||||
}
|
||||
|
||||
ata_pio_sector(qc);
|
||||
|
||||
if (ap->hsm_task_state == HSM_ST_LAST &&
|
||||
(!(qc->tf.flags & ATA_TFLAG_WRITE))) {
|
||||
/* all data read */
|
||||
ata_altstatus(ap);
|
||||
status = ata_chk_status(ap);
|
||||
goto fsm_start;
|
||||
}
|
||||
}
|
||||
|
||||
ata_altstatus(ap); /* flush */
|
||||
break;
|
||||
|
||||
case HSM_ST_LAST:
|
||||
if (unlikely(status & ATA_DRQ)) {
|
||||
/* handle DRQ=1 as error */
|
||||
ap->hsm_task_state = HSM_ST_ERR;
|
||||
goto fsm_start;
|
||||
}
|
||||
|
||||
/* no more data to transfer */
|
||||
DPRINTK("ata%u: command complete, drv_stat 0x%x\n",
|
||||
ap->id, status);
|
||||
|
||||
ap->hsm_task_state = HSM_ST_IDLE;
|
||||
|
||||
/* complete taskfile transaction */
|
||||
ata_qc_complete(qc, status);
|
||||
break;
|
||||
|
||||
case HSM_ST_ERR:
|
||||
printk(KERN_ERR "ata%u: command error, drv_stat 0x%x host_stat 0x%x\n",
|
||||
ap->id, status, host_stat);
|
||||
|
||||
ap->hsm_task_state = HSM_ST_IDLE;
|
||||
ata_qc_complete(qc, status | ATA_ERR);
|
||||
break;
|
||||
default:
|
||||
goto idle_irq;
|
||||
}
|
||||
@ -3733,11 +3929,11 @@ irqreturn_t ata_interrupt (int irq, void *dev_instance, struct pt_regs *regs)
|
||||
|
||||
ap = host_set->ports[i];
|
||||
if (ap &&
|
||||
!(ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR))) {
|
||||
!(ap->flags & ATA_FLAG_PORT_DISABLED)) {
|
||||
struct ata_queued_cmd *qc;
|
||||
|
||||
qc = ata_qc_from_tag(ap, ap->active_tag);
|
||||
if (qc && (!(qc->tf.ctl & ATA_NIEN)) &&
|
||||
if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)) &&
|
||||
(qc->flags & ATA_QCFLAG_ACTIVE))
|
||||
handled |= ata_host_intr(ap, qc);
|
||||
}
|
||||
@ -3767,6 +3963,7 @@ static void atapi_packet_task(void *_data)
|
||||
struct ata_port *ap = _data;
|
||||
struct ata_queued_cmd *qc;
|
||||
u8 status;
|
||||
unsigned long flags;
|
||||
|
||||
qc = ata_qc_from_tag(ap, ap->active_tag);
|
||||
assert(qc != NULL);
|
||||
@ -3782,38 +3979,40 @@ static void atapi_packet_task(void *_data)
|
||||
if ((status & (ATA_BUSY | ATA_DRQ)) != ATA_DRQ)
|
||||
goto err_out;
|
||||
|
||||
/* send SCSI cdb */
|
||||
DPRINTK("send cdb\n");
|
||||
assert(ap->cdb_len >= 12);
|
||||
|
||||
if (qc->tf.protocol == ATA_PROT_ATAPI_DMA ||
|
||||
qc->tf.protocol == ATA_PROT_ATAPI_NODATA) {
|
||||
unsigned long flags;
|
||||
|
||||
/* Once we're done issuing command and kicking bmdma,
|
||||
* irq handler takes over. To not lose irq, we need
|
||||
* to clear NOINTR flag before sending cdb, but
|
||||
* interrupt handler shouldn't be invoked before we're
|
||||
* finished. Hence, the following locking.
|
||||
/* Send the CDB (atapi) or the first data block (ata pio out).
|
||||
* During the state transition, interrupt handler shouldn't
|
||||
* be invoked before the data transfer is complete and
|
||||
* hsm_task_state is changed. Hence, the following locking.
|
||||
*/
|
||||
spin_lock_irqsave(&ap->host_set->lock, flags);
|
||||
ap->flags &= ~ATA_FLAG_NOINTR;
|
||||
ata_data_xfer(ap, qc->cdb, ap->cdb_len, 1);
|
||||
if (qc->tf.protocol == ATA_PROT_ATAPI_DMA)
|
||||
ap->ops->bmdma_start(qc); /* initiate bmdma */
|
||||
spin_unlock_irqrestore(&ap->host_set->lock, flags);
|
||||
} else {
|
||||
ata_data_xfer(ap, qc->cdb, ap->cdb_len, 1);
|
||||
|
||||
/* PIO commands are handled by polling */
|
||||
ap->hsm_task_state = HSM_ST;
|
||||
if (is_atapi_taskfile(&qc->tf)) {
|
||||
/* send CDB */
|
||||
atapi_send_cdb(ap, qc);
|
||||
|
||||
if (qc->tf.flags & ATA_TFLAG_POLLING)
|
||||
queue_work(ata_wq, &ap->pio_task);
|
||||
} else {
|
||||
/* PIO data out protocol.
|
||||
* send first data block.
|
||||
*/
|
||||
|
||||
/* ata_pio_sector() might change the state to HSM_ST_LAST.
|
||||
* so, the state is changed here before ata_pio_sector().
|
||||
*/
|
||||
ap->hsm_task_state = HSM_ST;
|
||||
ata_pio_sector(qc);
|
||||
ata_altstatus(ap); /* flush */
|
||||
|
||||
/* interrupt handler takes over from here */
|
||||
}
|
||||
|
||||
spin_unlock_irqrestore(&ap->host_set->lock, flags);
|
||||
|
||||
return;
|
||||
|
||||
err_out:
|
||||
ata_poll_qc_complete(qc, ATA_ERR);
|
||||
ata_pio_error(ap);
|
||||
}
|
||||
|
||||
|
||||
|
@ -181,6 +181,7 @@ enum {
|
||||
ATA_TFLAG_ISADDR = (1 << 1), /* enable r/w to nsect/lba regs */
|
||||
ATA_TFLAG_DEVICE = (1 << 2), /* enable r/w to device reg */
|
||||
ATA_TFLAG_WRITE = (1 << 3), /* data dir: host->dev==1 (write) */
|
||||
ATA_TFLAG_POLLING = (1 << 4), /* set nIEN to 1 and use polling */
|
||||
};
|
||||
|
||||
enum ata_tf_protocols {
|
||||
@ -250,6 +251,8 @@ struct ata_taskfile {
|
||||
((u64) (id)[(n) + 1] << 16) | \
|
||||
((u64) (id)[(n) + 0]) )
|
||||
|
||||
#define ata_id_cdb_intr(id) (((id)[0] & 0x60) == 0x20)
|
||||
|
||||
static inline int atapi_cdb_len(u16 *dev_id)
|
||||
{
|
||||
u16 tmp = dev_id[0] & 0x3;
|
||||
|
@ -97,6 +97,7 @@ enum {
|
||||
ATA_DFLAG_LBA48 = (1 << 0), /* device supports LBA48 */
|
||||
ATA_DFLAG_PIO = (1 << 1), /* device currently in PIO mode */
|
||||
ATA_DFLAG_LOCK_SECTORS = (1 << 2), /* don't adjust max_sectors */
|
||||
ATA_DFLAG_CDB_INTR = (1 << 3), /* device asserts INTRQ when ready for CDB */
|
||||
|
||||
ATA_DEV_UNKNOWN = 0, /* unknown device */
|
||||
ATA_DEV_ATA = 1, /* ATA device */
|
||||
@ -115,8 +116,6 @@ enum {
|
||||
ATA_FLAG_MMIO = (1 << 6), /* use MMIO, not PIO */
|
||||
ATA_FLAG_SATA_RESET = (1 << 7), /* use COMRESET */
|
||||
ATA_FLAG_PIO_DMA = (1 << 8), /* PIO cmds via DMA */
|
||||
ATA_FLAG_NOINTR = (1 << 9), /* FIXME: Remove this once
|
||||
* proper HSM is in place. */
|
||||
|
||||
ATA_QCFLAG_ACTIVE = (1 << 1), /* cmd not yet ack'd to scsi lyer */
|
||||
ATA_QCFLAG_SG = (1 << 3), /* have s/g table? */
|
||||
@ -165,6 +164,7 @@ enum hsm_task_states {
|
||||
HSM_ST_LAST,
|
||||
HSM_ST_LAST_POLL,
|
||||
HSM_ST_ERR,
|
||||
HSM_ST_FIRST,
|
||||
};
|
||||
|
||||
/* forward declarations */
|
||||
|
Loading…
Reference in New Issue
Block a user