PCI: qcom: Use default config space read function
Move the device class fudge to a proper fixup function, and remove qcom_pcie_rd_own_conf() which has become useless. dw_pcie_setup_rc() already did the right thing, but it's broken on older qcom chips, such as 8064. Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
This commit is contained in:
parent
9e98c678c2
commit
322f034366
@ -1129,25 +1129,8 @@ err_deinit:
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int qcom_pcie_rd_own_conf(struct pcie_port *pp, int where, int size,
|
||||
u32 *val)
|
||||
{
|
||||
struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
|
||||
|
||||
/* the device class is not reported correctly from the register */
|
||||
if (where == PCI_CLASS_REVISION && size == 4) {
|
||||
*val = readl(pci->dbi_base + PCI_CLASS_REVISION);
|
||||
*val &= 0xff; /* keep revision id */
|
||||
*val |= PCI_CLASS_BRIDGE_PCI << 16;
|
||||
return PCIBIOS_SUCCESSFUL;
|
||||
}
|
||||
|
||||
return dw_pcie_read(pci->dbi_base + where, size, val);
|
||||
}
|
||||
|
||||
static const struct dw_pcie_host_ops qcom_pcie_dw_ops = {
|
||||
.host_init = qcom_pcie_host_init,
|
||||
.rd_own_conf = qcom_pcie_rd_own_conf,
|
||||
};
|
||||
|
||||
/* Qcom IP rev.: 2.1.0 Synopsys IP rev.: 4.01a */
|
||||
@ -1309,6 +1292,12 @@ static const struct of_device_id qcom_pcie_match[] = {
|
||||
{ }
|
||||
};
|
||||
|
||||
static void qcom_fixup_class(struct pci_dev *dev)
|
||||
{
|
||||
dev->class = PCI_CLASS_BRIDGE_PCI << 8;
|
||||
}
|
||||
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, PCI_ANY_ID, qcom_fixup_class);
|
||||
|
||||
static struct platform_driver qcom_pcie_driver = {
|
||||
.probe = qcom_pcie_probe,
|
||||
.driver = {
|
||||
|
Loading…
Reference in New Issue
Block a user