spi: remove the older/duplicated bcm53xx driver
This driver was added by commit0fc6a323e1
("spi: bcm53xx: driver for SPI controller on Broadcom bcma SoC") back in 2014. It was needed to provide a minimal support for SPI controller on BCM5301X (AKA Northstar) devices. An alternative driver was added by Kamal in commitfa236a7ef2
("spi: bcm-qspi: Add Broadcom MSPI driver") 2 years later. It supports the same hardware but for some reason a new driver has been developed for it. At this point the new driver supports: more modes, setting a speed, setting bits per word and uses IRQs instead of polling. DTS file for BCM5301X has also been updated in the commit1c8f406507
("ARM: dts: BCM5301X: convert to iProc QSPI") - over a year ago. That explained I see no reason to keep the old driver alive. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
parent
62bbc864d1
commit
331bbcfc50
@ -1,360 +0,0 @@
|
||||
/*
|
||||
* Copyright (C) 2014-2016 Rafał Miłecki <rafal@milecki.pl>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/bcma/bcma.h>
|
||||
#include <linux/spi/spi.h>
|
||||
|
||||
#include "spi-bcm53xx.h"
|
||||
|
||||
#define BCM53XXSPI_MAX_SPI_BAUD 13500000 /* 216 MHz? */
|
||||
#define BCM53XXSPI_FLASH_WINDOW SZ_32M
|
||||
|
||||
/* The longest observed required wait was 19 ms */
|
||||
#define BCM53XXSPI_SPE_TIMEOUT_MS 80
|
||||
|
||||
struct bcm53xxspi {
|
||||
struct bcma_device *core;
|
||||
struct spi_master *master;
|
||||
void __iomem *mmio_base;
|
||||
bool bspi; /* Boot SPI mode with memory mapping */
|
||||
};
|
||||
|
||||
static inline u32 bcm53xxspi_read(struct bcm53xxspi *b53spi, u16 offset)
|
||||
{
|
||||
return bcma_read32(b53spi->core, offset);
|
||||
}
|
||||
|
||||
static inline void bcm53xxspi_write(struct bcm53xxspi *b53spi, u16 offset,
|
||||
u32 value)
|
||||
{
|
||||
bcma_write32(b53spi->core, offset, value);
|
||||
}
|
||||
|
||||
static void bcm53xxspi_disable_bspi(struct bcm53xxspi *b53spi)
|
||||
{
|
||||
struct device *dev = &b53spi->core->dev;
|
||||
unsigned long deadline;
|
||||
u32 tmp;
|
||||
|
||||
if (!b53spi->bspi)
|
||||
return;
|
||||
|
||||
tmp = bcm53xxspi_read(b53spi, B53SPI_BSPI_MAST_N_BOOT_CTRL);
|
||||
if (tmp & 0x1)
|
||||
return;
|
||||
|
||||
deadline = jiffies + usecs_to_jiffies(200);
|
||||
do {
|
||||
tmp = bcm53xxspi_read(b53spi, B53SPI_BSPI_BUSY_STATUS);
|
||||
if (!(tmp & 0x1)) {
|
||||
bcm53xxspi_write(b53spi, B53SPI_BSPI_MAST_N_BOOT_CTRL,
|
||||
0x1);
|
||||
ndelay(200);
|
||||
b53spi->bspi = false;
|
||||
return;
|
||||
}
|
||||
udelay(1);
|
||||
} while (!time_after_eq(jiffies, deadline));
|
||||
|
||||
dev_warn(dev, "Timeout disabling BSPI\n");
|
||||
}
|
||||
|
||||
static void bcm53xxspi_enable_bspi(struct bcm53xxspi *b53spi)
|
||||
{
|
||||
u32 tmp;
|
||||
|
||||
if (b53spi->bspi)
|
||||
return;
|
||||
|
||||
tmp = bcm53xxspi_read(b53spi, B53SPI_BSPI_MAST_N_BOOT_CTRL);
|
||||
if (!(tmp & 0x1))
|
||||
return;
|
||||
|
||||
bcm53xxspi_write(b53spi, B53SPI_BSPI_MAST_N_BOOT_CTRL, 0x0);
|
||||
b53spi->bspi = true;
|
||||
}
|
||||
|
||||
static inline unsigned int bcm53xxspi_calc_timeout(size_t len)
|
||||
{
|
||||
/* Do some magic calculation based on length and buad. Add 10% and 1. */
|
||||
return (len * 9000 / BCM53XXSPI_MAX_SPI_BAUD * 110 / 100) + 1;
|
||||
}
|
||||
|
||||
static int bcm53xxspi_wait(struct bcm53xxspi *b53spi, unsigned int timeout_ms)
|
||||
{
|
||||
unsigned long deadline;
|
||||
u32 tmp;
|
||||
|
||||
/* SPE bit has to be 0 before we read MSPI STATUS */
|
||||
deadline = jiffies + msecs_to_jiffies(BCM53XXSPI_SPE_TIMEOUT_MS);
|
||||
do {
|
||||
tmp = bcm53xxspi_read(b53spi, B53SPI_MSPI_SPCR2);
|
||||
if (!(tmp & B53SPI_MSPI_SPCR2_SPE))
|
||||
break;
|
||||
udelay(5);
|
||||
} while (!time_after_eq(jiffies, deadline));
|
||||
|
||||
if (tmp & B53SPI_MSPI_SPCR2_SPE)
|
||||
goto spi_timeout;
|
||||
|
||||
/* Check status */
|
||||
deadline = jiffies + msecs_to_jiffies(timeout_ms);
|
||||
do {
|
||||
tmp = bcm53xxspi_read(b53spi, B53SPI_MSPI_MSPI_STATUS);
|
||||
if (tmp & B53SPI_MSPI_MSPI_STATUS_SPIF) {
|
||||
bcm53xxspi_write(b53spi, B53SPI_MSPI_MSPI_STATUS, 0);
|
||||
return 0;
|
||||
}
|
||||
|
||||
cpu_relax();
|
||||
udelay(100);
|
||||
} while (!time_after_eq(jiffies, deadline));
|
||||
|
||||
spi_timeout:
|
||||
bcm53xxspi_write(b53spi, B53SPI_MSPI_MSPI_STATUS, 0);
|
||||
|
||||
pr_err("Timeout waiting for SPI to be ready!\n");
|
||||
|
||||
return -EBUSY;
|
||||
}
|
||||
|
||||
static void bcm53xxspi_buf_write(struct bcm53xxspi *b53spi, u8 *w_buf,
|
||||
size_t len, bool cont)
|
||||
{
|
||||
u32 tmp;
|
||||
int i;
|
||||
|
||||
for (i = 0; i < len; i++) {
|
||||
/* Transmit Register File MSB */
|
||||
bcm53xxspi_write(b53spi, B53SPI_MSPI_TXRAM + 4 * (i * 2),
|
||||
(unsigned int)w_buf[i]);
|
||||
}
|
||||
|
||||
for (i = 0; i < len; i++) {
|
||||
tmp = B53SPI_CDRAM_CONT | B53SPI_CDRAM_PCS_DISABLE_ALL |
|
||||
B53SPI_CDRAM_PCS_DSCK;
|
||||
if (!cont && i == len - 1)
|
||||
tmp &= ~B53SPI_CDRAM_CONT;
|
||||
tmp &= ~0x1;
|
||||
/* Command Register File */
|
||||
bcm53xxspi_write(b53spi, B53SPI_MSPI_CDRAM + 4 * i, tmp);
|
||||
}
|
||||
|
||||
/* Set queue pointers */
|
||||
bcm53xxspi_write(b53spi, B53SPI_MSPI_NEWQP, 0);
|
||||
bcm53xxspi_write(b53spi, B53SPI_MSPI_ENDQP, len - 1);
|
||||
|
||||
if (cont)
|
||||
bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 1);
|
||||
|
||||
/* Start SPI transfer */
|
||||
tmp = bcm53xxspi_read(b53spi, B53SPI_MSPI_SPCR2);
|
||||
tmp |= B53SPI_MSPI_SPCR2_SPE;
|
||||
if (cont)
|
||||
tmp |= B53SPI_MSPI_SPCR2_CONT_AFTER_CMD;
|
||||
bcm53xxspi_write(b53spi, B53SPI_MSPI_SPCR2, tmp);
|
||||
|
||||
/* Wait for SPI to finish */
|
||||
bcm53xxspi_wait(b53spi, bcm53xxspi_calc_timeout(len));
|
||||
|
||||
if (!cont)
|
||||
bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 0);
|
||||
}
|
||||
|
||||
static void bcm53xxspi_buf_read(struct bcm53xxspi *b53spi, u8 *r_buf,
|
||||
size_t len, bool cont)
|
||||
{
|
||||
u32 tmp;
|
||||
int i;
|
||||
|
||||
for (i = 0; i < len; i++) {
|
||||
tmp = B53SPI_CDRAM_CONT | B53SPI_CDRAM_PCS_DISABLE_ALL |
|
||||
B53SPI_CDRAM_PCS_DSCK;
|
||||
if (!cont && i == len - 1)
|
||||
tmp &= ~B53SPI_CDRAM_CONT;
|
||||
tmp &= ~0x1;
|
||||
/* Command Register File */
|
||||
bcm53xxspi_write(b53spi, B53SPI_MSPI_CDRAM + 4 * i, tmp);
|
||||
}
|
||||
|
||||
/* Set queue pointers */
|
||||
bcm53xxspi_write(b53spi, B53SPI_MSPI_NEWQP, 0);
|
||||
bcm53xxspi_write(b53spi, B53SPI_MSPI_ENDQP, len - 1);
|
||||
|
||||
if (cont)
|
||||
bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 1);
|
||||
|
||||
/* Start SPI transfer */
|
||||
tmp = bcm53xxspi_read(b53spi, B53SPI_MSPI_SPCR2);
|
||||
tmp |= B53SPI_MSPI_SPCR2_SPE;
|
||||
if (cont)
|
||||
tmp |= B53SPI_MSPI_SPCR2_CONT_AFTER_CMD;
|
||||
bcm53xxspi_write(b53spi, B53SPI_MSPI_SPCR2, tmp);
|
||||
|
||||
/* Wait for SPI to finish */
|
||||
bcm53xxspi_wait(b53spi, bcm53xxspi_calc_timeout(len));
|
||||
|
||||
if (!cont)
|
||||
bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 0);
|
||||
|
||||
for (i = 0; i < len; ++i) {
|
||||
u16 reg = B53SPI_MSPI_RXRAM + 4 * (1 + i * 2);
|
||||
|
||||
/* Data stored in the transmit register file LSB */
|
||||
r_buf[i] = (u8)bcm53xxspi_read(b53spi, reg);
|
||||
}
|
||||
}
|
||||
|
||||
static int bcm53xxspi_transfer_one(struct spi_master *master,
|
||||
struct spi_device *spi,
|
||||
struct spi_transfer *t)
|
||||
{
|
||||
struct bcm53xxspi *b53spi = spi_master_get_devdata(master);
|
||||
u8 *buf;
|
||||
size_t left;
|
||||
|
||||
bcm53xxspi_disable_bspi(b53spi);
|
||||
|
||||
if (t->tx_buf) {
|
||||
buf = (u8 *)t->tx_buf;
|
||||
left = t->len;
|
||||
while (left) {
|
||||
size_t to_write = min_t(size_t, 16, left);
|
||||
bool cont = !spi_transfer_is_last(master, t) ||
|
||||
left - to_write > 0;
|
||||
|
||||
bcm53xxspi_buf_write(b53spi, buf, to_write, cont);
|
||||
left -= to_write;
|
||||
buf += to_write;
|
||||
}
|
||||
}
|
||||
|
||||
if (t->rx_buf) {
|
||||
buf = (u8 *)t->rx_buf;
|
||||
left = t->len;
|
||||
while (left) {
|
||||
size_t to_read = min_t(size_t, 16, left);
|
||||
bool cont = !spi_transfer_is_last(master, t) ||
|
||||
left - to_read > 0;
|
||||
|
||||
bcm53xxspi_buf_read(b53spi, buf, to_read, cont);
|
||||
left -= to_read;
|
||||
buf += to_read;
|
||||
}
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int bcm53xxspi_flash_read(struct spi_device *spi,
|
||||
struct spi_flash_read_message *msg)
|
||||
{
|
||||
struct bcm53xxspi *b53spi = spi_master_get_devdata(spi->master);
|
||||
int ret = 0;
|
||||
|
||||
if (msg->from + msg->len > BCM53XXSPI_FLASH_WINDOW)
|
||||
return -EINVAL;
|
||||
|
||||
bcm53xxspi_enable_bspi(b53spi);
|
||||
memcpy_fromio(msg->buf, b53spi->mmio_base + msg->from, msg->len);
|
||||
msg->retlen = msg->len;
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
/**************************************************
|
||||
* BCMA
|
||||
**************************************************/
|
||||
|
||||
static const struct bcma_device_id bcm53xxspi_bcma_tbl[] = {
|
||||
BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_NS_QSPI, BCMA_ANY_REV, BCMA_ANY_CLASS),
|
||||
{},
|
||||
};
|
||||
MODULE_DEVICE_TABLE(bcma, bcm53xxspi_bcma_tbl);
|
||||
|
||||
static int bcm53xxspi_bcma_probe(struct bcma_device *core)
|
||||
{
|
||||
struct device *dev = &core->dev;
|
||||
struct bcm53xxspi *b53spi;
|
||||
struct spi_master *master;
|
||||
int err;
|
||||
|
||||
if (core->bus->drv_cc.core->id.rev != 42) {
|
||||
pr_err("SPI on SoC with unsupported ChipCommon rev\n");
|
||||
return -ENOTSUPP;
|
||||
}
|
||||
|
||||
master = spi_alloc_master(dev, sizeof(*b53spi));
|
||||
if (!master)
|
||||
return -ENOMEM;
|
||||
|
||||
b53spi = spi_master_get_devdata(master);
|
||||
b53spi->master = master;
|
||||
b53spi->core = core;
|
||||
|
||||
if (core->addr_s[0])
|
||||
b53spi->mmio_base = devm_ioremap(dev, core->addr_s[0],
|
||||
BCM53XXSPI_FLASH_WINDOW);
|
||||
b53spi->bspi = true;
|
||||
bcm53xxspi_disable_bspi(b53spi);
|
||||
|
||||
master->dev.of_node = dev->of_node;
|
||||
master->transfer_one = bcm53xxspi_transfer_one;
|
||||
if (b53spi->mmio_base)
|
||||
master->spi_flash_read = bcm53xxspi_flash_read;
|
||||
|
||||
bcma_set_drvdata(core, b53spi);
|
||||
|
||||
err = devm_spi_register_master(dev, master);
|
||||
if (err) {
|
||||
spi_master_put(master);
|
||||
bcma_set_drvdata(core, NULL);
|
||||
return err;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct bcma_driver bcm53xxspi_bcma_driver = {
|
||||
.name = KBUILD_MODNAME,
|
||||
.id_table = bcm53xxspi_bcma_tbl,
|
||||
.probe = bcm53xxspi_bcma_probe,
|
||||
};
|
||||
|
||||
/**************************************************
|
||||
* Init & exit
|
||||
**************************************************/
|
||||
|
||||
static int __init bcm53xxspi_module_init(void)
|
||||
{
|
||||
int err = 0;
|
||||
|
||||
err = bcma_driver_register(&bcm53xxspi_bcma_driver);
|
||||
if (err)
|
||||
pr_err("Failed to register bcma driver: %d\n", err);
|
||||
|
||||
return err;
|
||||
}
|
||||
|
||||
static void __exit bcm53xxspi_module_exit(void)
|
||||
{
|
||||
bcma_driver_unregister(&bcm53xxspi_bcma_driver);
|
||||
}
|
||||
|
||||
module_init(bcm53xxspi_module_init);
|
||||
module_exit(bcm53xxspi_module_exit);
|
||||
|
||||
MODULE_DESCRIPTION("Broadcom BCM53xx SPI Controller driver");
|
||||
MODULE_AUTHOR("Rafał Miłecki <zajec5@gmail.com>");
|
||||
MODULE_LICENSE("GPL v2");
|
@ -1,73 +0,0 @@
|
||||
/* SPDX-License-Identifier: GPL-2.0 */
|
||||
#ifndef SPI_BCM53XX_H
|
||||
#define SPI_BCM53XX_H
|
||||
|
||||
#define B53SPI_BSPI_REVISION_ID 0x000
|
||||
#define B53SPI_BSPI_SCRATCH 0x004
|
||||
#define B53SPI_BSPI_MAST_N_BOOT_CTRL 0x008
|
||||
#define B53SPI_BSPI_BUSY_STATUS 0x00c
|
||||
#define B53SPI_BSPI_INTR_STATUS 0x010
|
||||
#define B53SPI_BSPI_B0_STATUS 0x014
|
||||
#define B53SPI_BSPI_B0_CTRL 0x018
|
||||
#define B53SPI_BSPI_B1_STATUS 0x01c
|
||||
#define B53SPI_BSPI_B1_CTRL 0x020
|
||||
#define B53SPI_BSPI_STRAP_OVERRIDE_CTRL 0x024
|
||||
#define B53SPI_BSPI_FLEX_MODE_ENABLE 0x028
|
||||
#define B53SPI_BSPI_BITS_PER_CYCLE 0x02c
|
||||
#define B53SPI_BSPI_BITS_PER_PHASE 0x030
|
||||
#define B53SPI_BSPI_CMD_AND_MODE_BYTE 0x034
|
||||
#define B53SPI_BSPI_BSPI_FLASH_UPPER_ADDR_BYTE 0x038
|
||||
#define B53SPI_BSPI_BSPI_XOR_VALUE 0x03c
|
||||
#define B53SPI_BSPI_BSPI_XOR_ENABLE 0x040
|
||||
#define B53SPI_BSPI_BSPI_PIO_MODE_ENABLE 0x044
|
||||
#define B53SPI_BSPI_BSPI_PIO_IODIR 0x048
|
||||
#define B53SPI_BSPI_BSPI_PIO_DATA 0x04c
|
||||
|
||||
/* RAF */
|
||||
#define B53SPI_RAF_START_ADDR 0x100
|
||||
#define B53SPI_RAF_NUM_WORDS 0x104
|
||||
#define B53SPI_RAF_CTRL 0x108
|
||||
#define B53SPI_RAF_FULLNESS 0x10c
|
||||
#define B53SPI_RAF_WATERMARK 0x110
|
||||
#define B53SPI_RAF_STATUS 0x114
|
||||
#define B53SPI_RAF_READ_DATA 0x118
|
||||
#define B53SPI_RAF_WORD_CNT 0x11c
|
||||
#define B53SPI_RAF_CURR_ADDR 0x120
|
||||
|
||||
/* MSPI */
|
||||
#define B53SPI_MSPI_SPCR0_LSB 0x200
|
||||
#define B53SPI_MSPI_SPCR0_MSB 0x204
|
||||
#define B53SPI_MSPI_SPCR1_LSB 0x208
|
||||
#define B53SPI_MSPI_SPCR1_MSB 0x20c
|
||||
#define B53SPI_MSPI_NEWQP 0x210
|
||||
#define B53SPI_MSPI_ENDQP 0x214
|
||||
#define B53SPI_MSPI_SPCR2 0x218
|
||||
#define B53SPI_MSPI_SPCR2_SPE 0x00000040
|
||||
#define B53SPI_MSPI_SPCR2_CONT_AFTER_CMD 0x00000080
|
||||
#define B53SPI_MSPI_MSPI_STATUS 0x220
|
||||
#define B53SPI_MSPI_MSPI_STATUS_SPIF 0x00000001
|
||||
#define B53SPI_MSPI_CPTQP 0x224
|
||||
#define B53SPI_MSPI_TXRAM 0x240 /* 32 registers, up to 0x2b8 */
|
||||
#define B53SPI_MSPI_RXRAM 0x2c0 /* 32 registers, up to 0x33c */
|
||||
#define B53SPI_MSPI_CDRAM 0x340 /* 16 registers, up to 0x37c */
|
||||
#define B53SPI_CDRAM_PCS_PCS0 0x00000001
|
||||
#define B53SPI_CDRAM_PCS_PCS1 0x00000002
|
||||
#define B53SPI_CDRAM_PCS_PCS2 0x00000004
|
||||
#define B53SPI_CDRAM_PCS_PCS3 0x00000008
|
||||
#define B53SPI_CDRAM_PCS_DISABLE_ALL 0x0000000f
|
||||
#define B53SPI_CDRAM_PCS_DSCK 0x00000010
|
||||
#define B53SPI_CDRAM_BITSE 0x00000040
|
||||
#define B53SPI_CDRAM_CONT 0x00000080
|
||||
#define B53SPI_MSPI_WRITE_LOCK 0x380
|
||||
#define B53SPI_MSPI_DISABLE_FLUSH_GEN 0x384
|
||||
|
||||
/* Interrupt */
|
||||
#define B53SPI_INTR_RAF_LR_FULLNESS_REACHED 0x3a0
|
||||
#define B53SPI_INTR_RAF_LR_TRUNCATED 0x3a4
|
||||
#define B53SPI_INTR_RAF_LR_IMPATIENT 0x3a8
|
||||
#define B53SPI_INTR_RAF_LR_SESSION_DONE 0x3ac
|
||||
#define B53SPI_INTR_RAF_LR_OVERREAD 0x3b0
|
||||
#define B53SPI_INTR_MSPI_DONE 0x3b4
|
||||
#define B53SPI_INTR_MSPI_HALT_SET_TRANSACTION_DONE 0x3b8
|
||||
|
||||
#endif /* SPI_BCM53XX_H */
|
Loading…
Reference in New Issue
Block a user