diff --git a/Documentation/video4linux/CARDLIST.cx23885 b/Documentation/video4linux/CARDLIST.cx23885 index 191194ea1e25..f0e613ba55b8 100644 --- a/Documentation/video4linux/CARDLIST.cx23885 +++ b/Documentation/video4linux/CARDLIST.cx23885 @@ -8,3 +8,4 @@ 7 -> Hauppauge WinTV-HVR1200 [0070:71d1,0070:71d3] 8 -> Hauppauge WinTV-HVR1700 [0070:8101] 9 -> Hauppauge WinTV-HVR1400 [0070:8010] + 10 -> DViCO FusionHDTV7 Dual Express [18ac:d618] diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c index 20e05f230546..fd7112c11d35 100644 --- a/drivers/media/video/cx23885/cx23885-cards.c +++ b/drivers/media/video/cx23885/cx23885-cards.c @@ -143,6 +143,10 @@ struct cx23885_board cx23885_boards[] = { .name = "Hauppauge WinTV-HVR1400", .portc = CX23885_MPEG_DVB, }, + [CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP] = { + .name = "DViCO FusionHDTV7 Dual Express", + .portc = CX23885_MPEG_DVB, + }, }; const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards); @@ -210,6 +214,10 @@ struct cx23885_subid cx23885_subids[] = { .subvendor = 0x0070, .subdevice = 0x8010, .card = CX23885_BOARD_HAUPPAUGE_HVR1400, + },{ + .subvendor = 0x18ac, + .subdevice = 0xd618, + .card = CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP, }, }; const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids); @@ -477,6 +485,11 @@ void cx23885_card_setup(struct cx23885_dev *dev) } switch (dev->board) { + case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP: + ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ + ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */ + ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; + /* break omitted intentionally */ case CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP: ts1->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */ diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c index 022aa391937a..51dedb182c99 100644 --- a/drivers/media/video/cx23885/cx23885-dvb.c +++ b/drivers/media/video/cx23885/cx23885-dvb.c @@ -164,12 +164,28 @@ static struct s5h1409_config hauppauge_hvr1500q_config = { .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, }; +static struct s5h1409_config dvico_s5h1409_config = { + .demod_address = 0x32 >> 1, + .output_mode = S5H1409_SERIAL_OUTPUT, + .gpio = S5H1409_GPIO_ON, + .qam_if = 44000, + .inversion = S5H1409_INVERSION_OFF, + .status_mode = S5H1409_DEMODLOCKING, + .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, +}; + static struct xc5000_config hauppauge_hvr1500q_tunerconfig = { .i2c_address = 0x61, .if_khz = 5380, .tuner_callback = cx23885_tuner_callback }; +static struct xc5000_config dvico_xc5000_tunerconfig = { + .i2c_address = 0x64, + .if_khz = 5380, + .tuner_callback = cx23885_tuner_callback +}; + static struct tda829x_config tda829x_no_probe = { .probe_tuner = TDA829X_DONT_PROBE, }; @@ -453,6 +469,17 @@ static int dvb_register(struct cx23885_tsport *port) fe->ops.tuner_ops.set_config(fe, &ctl); } break; + case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP: + i2c_bus = &dev->i2c_bus[port->nr - 1]; + + port->dvb.frontend = dvb_attach(s5h1409_attach, + &dvico_s5h1409_config, + &i2c_bus->i2c_adap); + if (port->dvb.frontend != NULL) + dvb_attach(xc5000_attach, port->dvb.frontend, + &i2c_bus->i2c_adap, + &dvico_xc5000_tunerconfig, i2c_bus); + break; default: printk("%s: The frontend of your DVB/ATSC card isn't supported yet\n", dev->name); diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h index 32af87f25e7b..00dfdc89d641 100644 --- a/drivers/media/video/cx23885/cx23885.h +++ b/drivers/media/video/cx23885/cx23885.h @@ -63,6 +63,7 @@ #define CX23885_BOARD_HAUPPAUGE_HVR1200 7 #define CX23885_BOARD_HAUPPAUGE_HVR1700 8 #define CX23885_BOARD_HAUPPAUGE_HVR1400 9 +#define CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP 10 /* Currently unsupported by the driver: PAL/H, NTSC/Kr, SECAM B/G/H/LC */ #define CX23885_NORMS (\