i2c/busses: Add support for Diolan U2C-12 USB-I2C adapter
This patch adds support for the Diolan U2C-12 USB-I2C adapter. It also updates MAINTAINERS to list the author as maintainer. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
This commit is contained in:
Guenter Roeck
Ben Dooks
parent
6fb1b30425
commit
335d7c58fc
26
Documentation/i2c/busses/i2c-diolan-u2c
Normal file
26
Documentation/i2c/busses/i2c-diolan-u2c
Normal file
@ -0,0 +1,26 @@
|
||||
Kernel driver i2c-diolan-u2c
|
||||
|
||||
Supported adapters:
|
||||
* Diolan U2C-12 I2C-USB adapter
|
||||
Documentation:
|
||||
http://www.diolan.com/i2c/u2c12.html
|
||||
|
||||
Author: Guenter Roeck <guenter.roeck@ericsson.com>
|
||||
|
||||
Description
|
||||
-----------
|
||||
|
||||
This is the driver for the Diolan U2C-12 USB-I2C adapter.
|
||||
|
||||
The Diolan U2C-12 I2C-USB Adapter provides a low cost solution to connect
|
||||
a computer to I2C slave devices using a USB interface. It also supports
|
||||
connectivity to SPI devices.
|
||||
|
||||
This driver only supports the I2C interface of U2C-12. The driver does not use
|
||||
interrupts.
|
||||
|
||||
|
||||
Module parameters
|
||||
-----------------
|
||||
|
||||
* frequency: I2C bus frequency
|
||||
@ -2093,6 +2093,12 @@ F: Documentation/serial/digiepca.txt
|
||||
F: drivers/char/epca*
|
||||
F: drivers/char/digi*
|
||||
|
||||
DIOLAN U2C-12 I2C DRIVER
|
||||
M: Guenter Roeck <guenter.roeck@ericsson.com>
|
||||
L: linux-i2c@vger.kernel.org
|
||||
S: Maintained
|
||||
F: drivers/i2c/busses/i2c-diolan-u2c.c
|
||||
|
||||
DIRECTORY NOTIFICATION (DNOTIFY)
|
||||
M: Eric Paris <eparis@parisplace.org>
|
||||
S: Maintained
|
||||
|
||||
@ -648,6 +648,16 @@ config I2C_EG20T
|
||||
|
||||
comment "External I2C/SMBus adapter drivers"
|
||||
|
||||
config I2C_DIOLAN_U2C
|
||||
tristate "Diolan U2C-12 USB adapter"
|
||||
depends on USB
|
||||
help
|
||||
If you say yes to this option, support will be included for Diolan
|
||||
U2C-12, a USB to I2C interface.
|
||||
|
||||
This driver can also be built as a module. If so, the module
|
||||
will be called i2c-diolan-u2c.
|
||||
|
||||
config I2C_PARPORT
|
||||
tristate "Parallel port adapter"
|
||||
depends on PARPORT
|
||||
|
||||
@ -64,6 +64,7 @@ obj-$(CONFIG_I2C_XILINX) += i2c-xiic.o
|
||||
obj-$(CONFIG_I2C_EG20T) += i2c-eg20t.o
|
||||
|
||||
# External I2C/SMBus adapter drivers
|
||||
obj-$(CONFIG_I2C_DIOLAN_U2C) += i2c-diolan-u2c.o
|
||||
obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o
|
||||
obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o
|
||||
obj-$(CONFIG_I2C_TAOS_EVM) += i2c-taos-evm.o
|
||||
|
||||
535
drivers/i2c/busses/i2c-diolan-u2c.c
Normal file
535
drivers/i2c/busses/i2c-diolan-u2c.c
Normal file
@ -0,0 +1,535 @@
|
||||
/*
|
||||
* Driver for the Diolan u2c-12 USB-I2C adapter
|
||||
*
|
||||
* Copyright (c) 2010-2011 Ericsson AB
|
||||
*
|
||||
* Derived from:
|
||||
* i2c-tiny-usb.c
|
||||
* Copyright (C) 2006-2007 Till Harbaum (Till@Harbaum.org)
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation, version 2.
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/errno.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/types.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/usb.h>
|
||||
#include <linux/i2c.h>
|
||||
|
||||
#define DRIVER_NAME "i2c-diolan-u2c"
|
||||
|
||||
#define USB_VENDOR_ID_DIOLAN 0x0abf
|
||||
#define USB_DEVICE_ID_DIOLAN_U2C 0x3370
|
||||
|
||||
#define DIOLAN_OUT_EP 0x02
|
||||
#define DIOLAN_IN_EP 0x84
|
||||
|
||||
/* commands via USB, must match command ids in the firmware */
|
||||
#define CMD_I2C_READ 0x01
|
||||
#define CMD_I2C_WRITE 0x02
|
||||
#define CMD_I2C_SCAN 0x03 /* Returns list of detected devices */
|
||||
#define CMD_I2C_RELEASE_SDA 0x04
|
||||
#define CMD_I2C_RELEASE_SCL 0x05
|
||||
#define CMD_I2C_DROP_SDA 0x06
|
||||
#define CMD_I2C_DROP_SCL 0x07
|
||||
#define CMD_I2C_READ_SDA 0x08
|
||||
#define CMD_I2C_READ_SCL 0x09
|
||||
#define CMD_GET_FW_VERSION 0x0a
|
||||
#define CMD_GET_SERIAL 0x0b
|
||||
#define CMD_I2C_START 0x0c
|
||||
#define CMD_I2C_STOP 0x0d
|
||||
#define CMD_I2C_REPEATED_START 0x0e
|
||||
#define CMD_I2C_PUT_BYTE 0x0f
|
||||
#define CMD_I2C_GET_BYTE 0x10
|
||||
#define CMD_I2C_PUT_ACK 0x11
|
||||
#define CMD_I2C_GET_ACK 0x12
|
||||
#define CMD_I2C_PUT_BYTE_ACK 0x13
|
||||
#define CMD_I2C_GET_BYTE_ACK 0x14
|
||||
#define CMD_I2C_SET_SPEED 0x1b
|
||||
#define CMD_I2C_GET_SPEED 0x1c
|
||||
#define CMD_I2C_SET_CLK_SYNC 0x24
|
||||
#define CMD_I2C_GET_CLK_SYNC 0x25
|
||||
#define CMD_I2C_SET_CLK_SYNC_TO 0x26
|
||||
#define CMD_I2C_GET_CLK_SYNC_TO 0x27
|
||||
|
||||
#define RESP_OK 0x00
|
||||
#define RESP_FAILED 0x01
|
||||
#define RESP_BAD_MEMADDR 0x04
|
||||
#define RESP_DATA_ERR 0x05
|
||||
#define RESP_NOT_IMPLEMENTED 0x06
|
||||
#define RESP_NACK 0x07
|
||||
#define RESP_TIMEOUT 0x09
|
||||
|
||||
#define U2C_I2C_SPEED_FAST 0 /* 400 kHz */
|
||||
#define U2C_I2C_SPEED_STD 1 /* 100 kHz */
|
||||
#define U2C_I2C_SPEED_2KHZ 242 /* 2 kHz, minimum speed */
|
||||
#define U2C_I2C_SPEED(f) ((DIV_ROUND_UP(1000000, (f)) - 10) / 2 + 1)
|
||||
|
||||
#define U2C_I2C_FREQ_FAST 400000
|
||||
#define U2C_I2C_FREQ_STD 100000
|
||||
#define U2C_I2C_FREQ(s) (1000000 / (2 * (s - 1) + 10))
|
||||
|
||||
#define DIOLAN_USB_TIMEOUT 100 /* in ms */
|
||||
#define DIOLAN_SYNC_TIMEOUT 20 /* in ms */
|
||||
|
||||
#define DIOLAN_OUTBUF_LEN 128
|
||||
#define DIOLAN_FLUSH_LEN (DIOLAN_OUTBUF_LEN - 4)
|
||||
#define DIOLAN_INBUF_LEN 256 /* Maximum supported receive length */
|
||||
|
||||
/* Structure to hold all of our device specific stuff */
|
||||
struct i2c_diolan_u2c {
|
||||
u8 obuffer[DIOLAN_OUTBUF_LEN]; /* output buffer */
|
||||
u8 ibuffer[DIOLAN_INBUF_LEN]; /* input buffer */
|
||||
struct usb_device *usb_dev; /* the usb device for this device */
|
||||
struct usb_interface *interface;/* the interface for this device */
|
||||
struct i2c_adapter adapter; /* i2c related things */
|
||||
int olen; /* Output buffer length */
|
||||
int ocount; /* Number of enqueued messages */
|
||||
};
|
||||
|
||||
static uint frequency = U2C_I2C_FREQ_STD; /* I2C clock frequency in Hz */
|
||||
|
||||
module_param(frequency, uint, S_IRUGO | S_IWUSR);
|
||||
MODULE_PARM_DESC(frequency, "I2C clock frequency in hertz");
|
||||
|
||||
/* usb layer */
|
||||
|
||||
/* Send command to device, and get response. */
|
||||
static int diolan_usb_transfer(struct i2c_diolan_u2c *dev)
|
||||
{
|
||||
int ret = 0;
|
||||
int actual;
|
||||
int i;
|
||||
|
||||
if (!dev->olen || !dev->ocount)
|
||||
return -EINVAL;
|
||||
|
||||
ret = usb_bulk_msg(dev->usb_dev,
|
||||
usb_sndbulkpipe(dev->usb_dev, DIOLAN_OUT_EP),
|
||||
dev->obuffer, dev->olen, &actual,
|
||||
DIOLAN_USB_TIMEOUT);
|
||||
if (!ret) {
|
||||
for (i = 0; i < dev->ocount; i++) {
|
||||
int tmpret;
|
||||
|
||||
tmpret = usb_bulk_msg(dev->usb_dev,
|
||||
usb_rcvbulkpipe(dev->usb_dev,
|
||||
DIOLAN_IN_EP),
|
||||
dev->ibuffer,
|
||||
sizeof(dev->ibuffer), &actual,
|
||||
DIOLAN_USB_TIMEOUT);
|
||||
/*
|
||||
* Stop command processing if a previous command
|
||||
* returned an error.
|
||||
* Note that we still need to retrieve all messages.
|
||||
*/
|
||||
if (ret < 0)
|
||||
continue;
|
||||
ret = tmpret;
|
||||
if (ret == 0 && actual > 0) {
|
||||
switch (dev->ibuffer[actual - 1]) {
|
||||
case RESP_NACK:
|
||||
/*
|
||||
* Return ENXIO if NACK was received as
|
||||
* response to the address phase,
|
||||
* EIO otherwise
|
||||
*/
|
||||
ret = i == 1 ? -ENXIO : -EIO;
|
||||
break;
|
||||
case RESP_TIMEOUT:
|
||||
ret = -ETIMEDOUT;
|
||||
break;
|
||||
case RESP_OK:
|
||||
/* strip off return code */
|
||||
ret = actual - 1;
|
||||
break;
|
||||
default:
|
||||
ret = -EIO;
|
||||
break;
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
dev->olen = 0;
|
||||
dev->ocount = 0;
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int diolan_write_cmd(struct i2c_diolan_u2c *dev, bool flush)
|
||||
{
|
||||
if (flush || dev->olen >= DIOLAN_FLUSH_LEN)
|
||||
return diolan_usb_transfer(dev);
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* Send command (no data) */
|
||||
static int diolan_usb_cmd(struct i2c_diolan_u2c *dev, u8 command, bool flush)
|
||||
{
|
||||
dev->obuffer[dev->olen++] = command;
|
||||
dev->ocount++;
|
||||
return diolan_write_cmd(dev, flush);
|
||||
}
|
||||
|
||||
/* Send command with one byte of data */
|
||||
static int diolan_usb_cmd_data(struct i2c_diolan_u2c *dev, u8 command, u8 data,
|
||||
bool flush)
|
||||
{
|
||||
dev->obuffer[dev->olen++] = command;
|
||||
dev->obuffer[dev->olen++] = data;
|
||||
dev->ocount++;
|
||||
return diolan_write_cmd(dev, flush);
|
||||
}
|
||||
|
||||
/* Send command with two bytes of data */
|
||||
static int diolan_usb_cmd_data2(struct i2c_diolan_u2c *dev, u8 command, u8 d1,
|
||||
u8 d2, bool flush)
|
||||
{
|
||||
dev->obuffer[dev->olen++] = command;
|
||||
dev->obuffer[dev->olen++] = d1;
|
||||
dev->obuffer[dev->olen++] = d2;
|
||||
dev->ocount++;
|
||||
return diolan_write_cmd(dev, flush);
|
||||
}
|
||||
|
||||
/*
|
||||
* Flush input queue.
|
||||
* If we don't do this at startup and the controller has queued up
|
||||
* messages which were not retrieved, it will stop responding
|
||||
* at some point.
|
||||
*/
|
||||
static void diolan_flush_input(struct i2c_diolan_u2c *dev)
|
||||
{
|
||||
int i;
|
||||
|
||||
for (i = 0; i < 10; i++) {
|
||||
int actual = 0;
|
||||
int ret;
|
||||
|
||||
ret = usb_bulk_msg(dev->usb_dev,
|
||||
usb_rcvbulkpipe(dev->usb_dev, DIOLAN_IN_EP),
|
||||
dev->ibuffer, sizeof(dev->ibuffer), &actual,
|
||||
DIOLAN_USB_TIMEOUT);
|
||||
if (ret < 0 || actual == 0)
|
||||
break;
|
||||
}
|
||||
if (i == 10)
|
||||
dev_err(&dev->interface->dev, "Failed to flush input buffer\n");
|
||||
}
|
||||
|
||||
static int diolan_i2c_start(struct i2c_diolan_u2c *dev)
|
||||
{
|
||||
return diolan_usb_cmd(dev, CMD_I2C_START, false);
|
||||
}
|
||||
|
||||
static int diolan_i2c_repeated_start(struct i2c_diolan_u2c *dev)
|
||||
{
|
||||
return diolan_usb_cmd(dev, CMD_I2C_REPEATED_START, false);
|
||||
}
|
||||
|
||||
static int diolan_i2c_stop(struct i2c_diolan_u2c *dev)
|
||||
{
|
||||
return diolan_usb_cmd(dev, CMD_I2C_STOP, true);
|
||||
}
|
||||
|
||||
static int diolan_i2c_get_byte_ack(struct i2c_diolan_u2c *dev, bool ack,
|
||||
u8 *byte)
|
||||
{
|
||||
int ret;
|
||||
|
||||
ret = diolan_usb_cmd_data(dev, CMD_I2C_GET_BYTE_ACK, ack, true);
|
||||
if (ret > 0)
|
||||
*byte = dev->ibuffer[0];
|
||||
else if (ret == 0)
|
||||
ret = -EIO;
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int diolan_i2c_put_byte_ack(struct i2c_diolan_u2c *dev, u8 byte)
|
||||
{
|
||||
return diolan_usb_cmd_data(dev, CMD_I2C_PUT_BYTE_ACK, byte, false);
|
||||
}
|
||||
|
||||
static int diolan_set_speed(struct i2c_diolan_u2c *dev, u8 speed)
|
||||
{
|
||||
return diolan_usb_cmd_data(dev, CMD_I2C_SET_SPEED, speed, true);
|
||||
}
|
||||
|
||||
/* Enable or disable clock synchronization (stretching) */
|
||||
static int diolan_set_clock_synch(struct i2c_diolan_u2c *dev, bool enable)
|
||||
{
|
||||
return diolan_usb_cmd_data(dev, CMD_I2C_SET_CLK_SYNC, enable, true);
|
||||
}
|
||||
|
||||
/* Set clock synchronization timeout in ms */
|
||||
static int diolan_set_clock_synch_timeout(struct i2c_diolan_u2c *dev, int ms)
|
||||
{
|
||||
int to_val = ms * 10;
|
||||
|
||||
return diolan_usb_cmd_data2(dev, CMD_I2C_SET_CLK_SYNC_TO,
|
||||
to_val & 0xff, (to_val >> 8) & 0xff, true);
|
||||
}
|
||||
|
||||
static void diolan_fw_version(struct i2c_diolan_u2c *dev)
|
||||
{
|
||||
int ret;
|
||||
|
||||
ret = diolan_usb_cmd(dev, CMD_GET_FW_VERSION, true);
|
||||
if (ret >= 2)
|
||||
dev_info(&dev->interface->dev,
|
||||
"Diolan U2C firmware version %u.%u\n",
|
||||
(unsigned int)dev->ibuffer[0],
|
||||
(unsigned int)dev->ibuffer[1]);
|
||||
}
|
||||
|
||||
static void diolan_get_serial(struct i2c_diolan_u2c *dev)
|
||||
{
|
||||
int ret;
|
||||
u32 serial;
|
||||
|
||||
ret = diolan_usb_cmd(dev, CMD_GET_SERIAL, true);
|
||||
if (ret >= 4) {
|
||||
serial = le32_to_cpu(*(u32 *)dev->ibuffer);
|
||||
dev_info(&dev->interface->dev,
|
||||
"Diolan U2C serial number %u\n", serial);
|
||||
}
|
||||
}
|
||||
|
||||
static int diolan_init(struct i2c_diolan_u2c *dev)
|
||||
{
|
||||
int speed, ret;
|
||||
|
||||
if (frequency >= 200000) {
|
||||
speed = U2C_I2C_SPEED_FAST;
|
||||
frequency = U2C_I2C_FREQ_FAST;
|
||||
} else if (frequency >= 100000 || frequency == 0) {
|
||||
speed = U2C_I2C_SPEED_STD;
|
||||
frequency = U2C_I2C_FREQ_STD;
|
||||
} else {
|
||||
speed = U2C_I2C_SPEED(frequency);
|
||||
if (speed > U2C_I2C_SPEED_2KHZ)
|
||||
speed = U2C_I2C_SPEED_2KHZ;
|
||||
frequency = U2C_I2C_FREQ(speed);
|
||||
}
|
||||
|
||||
dev_info(&dev->interface->dev,
|
||||
"Diolan U2C at USB bus %03d address %03d speed %d Hz\n",
|
||||
dev->usb_dev->bus->busnum, dev->usb_dev->devnum, frequency);
|
||||
|
||||
diolan_flush_input(dev);
|
||||
diolan_fw_version(dev);
|
||||
diolan_get_serial(dev);
|
||||
|
||||
/* Set I2C speed */
|
||||
ret = diolan_set_speed(dev, speed);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
/* Configure I2C clock synchronization */
|
||||
ret = diolan_set_clock_synch(dev, speed != U2C_I2C_SPEED_FAST);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
if (speed != U2C_I2C_SPEED_FAST)
|
||||
ret = diolan_set_clock_synch_timeout(dev, DIOLAN_SYNC_TIMEOUT);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
/* i2c layer */
|
||||
|
||||
static int diolan_usb_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs,
|
||||
int num)
|
||||
{
|
||||
struct i2c_diolan_u2c *dev = i2c_get_adapdata(adapter);
|
||||
struct i2c_msg *pmsg;
|
||||
int i, j;
|
||||
int ret, sret;
|
||||
|
||||
ret = diolan_i2c_start(dev);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
for (i = 0; i < num; i++) {
|
||||
pmsg = &msgs[i];
|
||||
if (i) {
|
||||
ret = diolan_i2c_repeated_start(dev);
|
||||
if (ret < 0)
|
||||
goto abort;
|
||||
}
|
||||
if (pmsg->flags & I2C_M_RD) {
|
||||
ret =
|
||||
diolan_i2c_put_byte_ack(dev, (pmsg->addr << 1) | 1);
|
||||
if (ret < 0)
|
||||
goto abort;
|
||||
for (j = 0; j < pmsg->len; j++) {
|
||||
u8 byte;
|
||||
bool ack = j < pmsg->len - 1;
|
||||
|
||||
/*
|
||||
* Don't send NACK if this is the first byte
|
||||
* of a SMBUS_BLOCK message.
|
||||
*/
|
||||
if (j == 0 && (pmsg->flags & I2C_M_RECV_LEN))
|
||||
ack = true;
|
||||
|
||||
ret = diolan_i2c_get_byte_ack(dev, ack, &byte);
|
||||
if (ret < 0)
|
||||
goto abort;
|
||||
/*
|
||||
* Adjust count if first received byte is length
|
||||
*/
|
||||
if (j == 0 && (pmsg->flags & I2C_M_RECV_LEN)) {
|
||||
if (byte == 0
|
||||
|| byte > I2C_SMBUS_BLOCK_MAX) {
|
||||
ret = -EPROTO;
|
||||
goto abort;
|
||||
}
|
||||
pmsg->len += byte;
|
||||
}
|
||||
pmsg->buf[j] = byte;
|
||||
}
|
||||
} else {
|
||||
ret = diolan_i2c_put_byte_ack(dev, pmsg->addr << 1);
|
||||
if (ret < 0)
|
||||
goto abort;
|
||||
for (j = 0; j < pmsg->len; j++) {
|
||||
ret = diolan_i2c_put_byte_ack(dev,
|
||||
pmsg->buf[j]);
|
||||
if (ret < 0)
|
||||
goto abort;
|
||||
}
|
||||
}
|
||||
}
|
||||
abort:
|
||||
sret = diolan_i2c_stop(dev);
|
||||
if (sret < 0 && ret >= 0)
|
||||
ret = sret;
|
||||
return ret;
|
||||
}
|
||||
|
||||
/*
|
||||
* Return list of supported functionality.
|
||||
*/
|
||||
static u32 diolan_usb_func(struct i2c_adapter *a)
|
||||
{
|
||||
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL |
|
||||
I2C_FUNC_SMBUS_READ_BLOCK_DATA | I2C_FUNC_SMBUS_BLOCK_PROC_CALL;
|
||||
}
|
||||
|
||||
static const struct i2c_algorithm diolan_usb_algorithm = {
|
||||
.master_xfer = diolan_usb_xfer,
|
||||
.functionality = diolan_usb_func,
|
||||
};
|
||||
|
||||
/* device layer */
|
||||
|
||||
static const struct usb_device_id diolan_u2c_table[] = {
|
||||
{ USB_DEVICE(USB_VENDOR_ID_DIOLAN, USB_DEVICE_ID_DIOLAN_U2C) },
|
||||
{ }
|
||||
};
|
||||
|
||||
MODULE_DEVICE_TABLE(usb, diolan_u2c_table);
|
||||
|
||||
static void diolan_u2c_free(struct i2c_diolan_u2c *dev)
|
||||
{
|
||||
usb_put_dev(dev->usb_dev);
|
||||
kfree(dev);
|
||||
}
|
||||
|
||||
static int diolan_u2c_probe(struct usb_interface *interface,
|
||||
const struct usb_device_id *id)
|
||||
{
|
||||
struct i2c_diolan_u2c *dev;
|
||||
int ret;
|
||||
|
||||
/* allocate memory for our device state and initialize it */
|
||||
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
|
||||
if (dev == NULL) {
|
||||
dev_err(&interface->dev, "no memory for device state\n");
|
||||
ret = -ENOMEM;
|
||||
goto error;
|
||||
}
|
||||
|
||||
dev->usb_dev = usb_get_dev(interface_to_usbdev(interface));
|
||||
dev->interface = interface;
|
||||
|
||||
/* save our data pointer in this interface device */
|
||||
usb_set_intfdata(interface, dev);
|
||||
|
||||
/* setup i2c adapter description */
|
||||
dev->adapter.owner = THIS_MODULE;
|
||||
dev->adapter.class = I2C_CLASS_HWMON;
|
||||
dev->adapter.algo = &diolan_usb_algorithm;
|
||||
i2c_set_adapdata(&dev->adapter, dev);
|
||||
snprintf(dev->adapter.name, sizeof(dev->adapter.name),
|
||||
DRIVER_NAME " at bus %03d device %03d",
|
||||
dev->usb_dev->bus->busnum, dev->usb_dev->devnum);
|
||||
|
||||
dev->adapter.dev.parent = &dev->interface->dev;
|
||||
|
||||
/* initialize diolan i2c interface */
|
||||
ret = diolan_init(dev);
|
||||
if (ret < 0) {
|
||||
dev_err(&interface->dev, "failed to initialize adapter\n");
|
||||
goto error_free;
|
||||
}
|
||||
|
||||
/* and finally attach to i2c layer */
|
||||
ret = i2c_add_adapter(&dev->adapter);
|
||||
if (ret < 0) {
|
||||
dev_err(&interface->dev, "failed to add I2C adapter\n");
|
||||
goto error_free;
|
||||
}
|
||||
|
||||
dev_dbg(&interface->dev, "connected " DRIVER_NAME "\n");
|
||||
|
||||
return 0;
|
||||
|
||||
error_free:
|
||||
usb_set_intfdata(interface, NULL);
|
||||
diolan_u2c_free(dev);
|
||||
error:
|
||||
return ret;
|
||||
}
|
||||
|
||||
static void diolan_u2c_disconnect(struct usb_interface *interface)
|
||||
{
|
||||
struct i2c_diolan_u2c *dev = usb_get_intfdata(interface);
|
||||
|
||||
i2c_del_adapter(&dev->adapter);
|
||||
usb_set_intfdata(interface, NULL);
|
||||
diolan_u2c_free(dev);
|
||||
|
||||
dev_dbg(&interface->dev, "disconnected\n");
|
||||
}
|
||||
|
||||
static struct usb_driver diolan_u2c_driver = {
|
||||
.name = DRIVER_NAME,
|
||||
.probe = diolan_u2c_probe,
|
||||
.disconnect = diolan_u2c_disconnect,
|
||||
.id_table = diolan_u2c_table,
|
||||
};
|
||||
|
||||
static int __init diolan_u2c_init(void)
|
||||
{
|
||||
/* register this driver with the USB subsystem */
|
||||
return usb_register(&diolan_u2c_driver);
|
||||
}
|
||||
|
||||
static void __exit diolan_u2c_exit(void)
|
||||
{
|
||||
/* deregister this driver with the USB subsystem */
|
||||
usb_deregister(&diolan_u2c_driver);
|
||||
}
|
||||
|
||||
module_init(diolan_u2c_init);
|
||||
module_exit(diolan_u2c_exit);
|
||||
|
||||
MODULE_AUTHOR("Guenter Roeck <guenter.roeck@ericsson.com>");
|
||||
MODULE_DESCRIPTION(DRIVER_NAME " driver");
|
||||
MODULE_LICENSE("GPL");
|
||||
Loading…
Reference in New Issue
Block a user