From 5cfccd7f132432dd4705444a44b51d12ef88a85f Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Wed, 16 Nov 2005 23:37:53 +1100 Subject: [PATCH 01/35] [PATCH] powerpc: Fix database regression due to scheduler changes PowerPC's NUMA domain doesn't currently set up some of the newer sched-domains parameters. Brian Twichell discovered and diagnosed a 1.5% OLTP database regression on a 4 core POWER5 system that was due to the use of NUMA scheduling on ppc64. This patch applies some saneish values to the parameters, in line with other architectures. This solves the regression. Signed-off-by: Nick Piggin Signed-off-by: Paul Mackerras --- include/asm-powerpc/topology.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/include/asm-powerpc/topology.h b/include/asm-powerpc/topology.h index 015d28746e1b..0e8c20c96062 100644 --- a/include/asm-powerpc/topology.h +++ b/include/asm-powerpc/topology.h @@ -41,6 +41,10 @@ static inline int node_to_first_cpu(int node) .cache_hot_time = (10*1000000), \ .cache_nice_tries = 1, \ .per_cpu_gain = 100, \ + .busy_idx = 3, \ + .idle_id = 1, \ + .newidle_idx = 2, \ + .wake_idx = 1, \ .flags = SD_LOAD_BALANCE \ | SD_BALANCE_EXEC \ | SD_BALANCE_NEWIDLE \ From 1e28a7ddd3e713384e9c6768e7c502031dc205e2 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Thu, 17 Nov 2005 00:44:03 +0000 Subject: [PATCH 02/35] [PATCH] Avoid use of uninitialised spinlock in EEH. If the kernel supports both G5 and pSeries, and CONFIG_EEH is enabled, eeh_init() is (quite reasonably) never called when we boot on a G5. Yet eeh_check_failure() still gets called. We should avoid doing that if !eeh_subsystem_enabled. Signed-off-by: David Woodhouse Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pseries/eeh.c | 3 ++- include/asm-powerpc/eeh.h | 4 +++- 2 files changed, 5 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c index 79de2310e70b..c8d2a40dc5b4 100644 --- a/arch/powerpc/platforms/pseries/eeh.c +++ b/arch/powerpc/platforms/pseries/eeh.c @@ -86,7 +86,8 @@ static int ibm_read_slot_reset_state; static int ibm_read_slot_reset_state2; static int ibm_slot_error_detail; -static int eeh_subsystem_enabled; +int eeh_subsystem_enabled; +EXPORT_SYMBOL(eeh_subsystem_enabled); /* Lock to avoid races due to multiple reports of an error */ static DEFINE_SPINLOCK(confirm_error_lock); diff --git a/include/asm-powerpc/eeh.h b/include/asm-powerpc/eeh.h index 89f26ab31908..f8633aafe4ba 100644 --- a/include/asm-powerpc/eeh.h +++ b/include/asm-powerpc/eeh.h @@ -30,6 +30,8 @@ struct device_node; #ifdef CONFIG_EEH +extern int eeh_subsystem_enabled; + /* Values for eeh_mode bits in device_node */ #define EEH_MODE_SUPPORTED (1<<0) #define EEH_MODE_NOCHECK (1<<1) @@ -75,7 +77,7 @@ void eeh_remove_device(struct pci_dev *); * If this macro yields TRUE, the caller relays to eeh_check_failure() * which does further tests out of line. */ -#define EEH_POSSIBLE_ERROR(val, type) ((val) == (type)~0) +#define EEH_POSSIBLE_ERROR(val, type) ((val) == (type)~0 && eeh_subsystem_enabled) /* * Reads from a device which has been isolated by EEH will return From b341e32e5cc1a154cb0ac2f4229c2d040647804b Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 17 Nov 2005 13:34:57 +1100 Subject: [PATCH 03/35] [PATCH] powerpc: Workaround for offb on 64 bits platforms This fixes a problem with offb not parsing addresses properly on 64 bits machines, and thus crashing at boot. The problem is worked around by locating the matching PCI device and using the properly relocated PCI base addresses instead of misparsing the Open Firmware properties. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- drivers/video/offb.c | 40 +++++++++++++++++++++++++++++++++++----- 1 file changed, 35 insertions(+), 5 deletions(-) diff --git a/drivers/video/offb.c b/drivers/video/offb.c index 2c856838694e..fe8ba364b3e8 100644 --- a/drivers/video/offb.c +++ b/drivers/video/offb.c @@ -325,8 +325,8 @@ static void __init offb_init_nodriver(struct device_node *dp) int *pp, i; unsigned int len; int width = 640, height = 480, depth = 8, pitch; - unsigned *up; - unsigned long address; + unsigned int rsize, *up; + unsigned long address = 0; if ((pp = (int *) get_property(dp, "depth", &len)) != NULL && len == sizeof(int)) @@ -344,10 +344,40 @@ static void __init offb_init_nodriver(struct device_node *dp) pitch = 0x1000; } else pitch = width; - if ((up = (unsigned *) get_property(dp, "address", &len)) != NULL - && len == sizeof(unsigned)) + + rsize = (unsigned long)pitch * (unsigned long)height * + (unsigned long)(depth / 8); + + /* Try to match device to a PCI device in order to get a properly + * translated address rather then trying to decode the open firmware + * stuff in various incorrect ways + */ +#ifdef CONFIG_PCI + /* First try to locate the PCI device if any */ + { + struct pci_dev *pdev = NULL; + + for_each_pci_dev(pdev) { + if (dp == pci_device_to_OF_node(pdev)) + break; + } + if (pdev) { + for (i = 0; i < 6 && address == 0; i++) { + if ((pci_resource_flags(pdev, i) & + IORESOURCE_MEM) && + (pci_resource_len(pdev, i) >= rsize)) + address = pci_resource_start(pdev, i); + } + pci_dev_put(pdev); + } + } +#endif /* CONFIG_PCI */ + + if (address == 0 && + (up = (unsigned *) get_property(dp, "address", &len)) != NULL && + len == sizeof(unsigned)) address = (u_long) * up; - else { + if (address == 0) { for (i = 0; i < dp->n_addrs; ++i) if (dp->addrs[i].size >= pitch * height * depth / 8) From fedb25fae72bc2c3709448a43be067439643da87 Mon Sep 17 00:00:00 2001 From: "Chen, Kenneth W" Date: Thu, 17 Nov 2005 01:38:42 -0800 Subject: [PATCH 04/35] [IA64] 4 level page table bug fix in vhpt_miss From source code inspection, I think there is a bug with 4 level page table with vhpt_miss handler. In the code path of rechecking page table entry against previously read value after tlb insertion, *pte value in register r18 was overwritten with value newly read from pud pointer, render the check of new *pte against previous *pte completely wrong. Though the bug is none fatal and the penalty is to purge the entry and retry. For functional correctness, it should be fixed. The fix is to use a different register so new *pud don't trash *pte. (btw, the comments in the cmp statement is wrong as well, which I will address in the next patch). Signed-off-by: Ken Chen Signed-off-by: Tony Luck --- arch/ia64/kernel/ivt.S | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/ia64/kernel/ivt.S b/arch/ia64/kernel/ivt.S index e06f21f60dc5..c71c79262a48 100644 --- a/arch/ia64/kernel/ivt.S +++ b/arch/ia64/kernel/ivt.S @@ -209,13 +209,13 @@ ENTRY(vhpt_miss) ld8 r25=[r21] // read L4 entry again ld8 r26=[r17] // read L3 PTE again #ifdef CONFIG_PGTABLE_4 - ld8 r18=[r28] // read L2 entry again + ld8 r19=[r28] // read L2 entry again #endif cmp.ne p6,p7=r0,r0 ;; cmp.ne.or.andcm p6,p7=r26,r20 // did L3 entry change #ifdef CONFIG_PGTABLE_4 - cmp.ne.or.andcm p6,p7=r29,r18 // did L4 PTE change + cmp.ne.or.andcm p6,p7=r19,r29 // did L4 PTE change #endif mov r27=PAGE_SHIFT<<2 ;; From e8aabc47168d24eabc08418db4e034a4c625721c Mon Sep 17 00:00:00 2001 From: "Chen, Kenneth W" Date: Thu, 17 Nov 2005 01:55:34 -0800 Subject: [PATCH 05/35] [IA64] polish comments for tlb fault handler in ivt.S Polish the comments specifically in vhpt_miss and nested_dtlb_miss handlers. I think it's better to explicitly name each page table level with its name instead of numerically name them. i.e., use pgd, pud, pmd, and pte instead of referring as L1, L2, L3 etc. Along the line, remove some magic number in the comments like: "PTA + (((IFA(61,63) << 7) | IFA(33,39))*8)". No code change at all, pure comment update. Feel free to shoot anything you have, darts or tomahawk cruise missile. I will duck behind a bunker ;-) Signed-off-by: Ken Chen Acked-by: Robin Holt Signed-off-by: Tony Luck --- arch/ia64/kernel/ivt.S | 133 ++++++++++++++++++++++------------------- 1 file changed, 71 insertions(+), 62 deletions(-) diff --git a/arch/ia64/kernel/ivt.S b/arch/ia64/kernel/ivt.S index c71c79262a48..301f2e9d262e 100644 --- a/arch/ia64/kernel/ivt.S +++ b/arch/ia64/kernel/ivt.S @@ -91,16 +91,17 @@ ENTRY(vhpt_miss) * (the "original") TLB miss, which may either be caused by an instruction * fetch or a data access (or non-access). * - * What we do here is normal TLB miss handing for the _original_ miss, followed - * by inserting the TLB entry for the virtual page table page that the VHPT - * walker was attempting to access. The latter gets inserted as long - * as both L1 and L2 have valid mappings for the faulting address. - * The TLB entry for the original miss gets inserted only if - * the L3 entry indicates that the page is present. + * What we do here is normal TLB miss handing for the _original_ miss, + * followed by inserting the TLB entry for the virtual page table page + * that the VHPT walker was attempting to access. The latter gets + * inserted as long as page table entry above pte level have valid + * mappings for the faulting address. The TLB entry for the original + * miss gets inserted only if the pte entry indicates that the page is + * present. * * do_page_fault gets invoked in the following cases: * - the faulting virtual address uses unimplemented address bits - * - the faulting virtual address has no L1, L2, or L3 mapping + * - the faulting virtual address has no valid page table mapping */ mov r16=cr.ifa // get address that caused the TLB miss #ifdef CONFIG_HUGETLB_PAGE @@ -126,7 +127,7 @@ ENTRY(vhpt_miss) #endif ;; cmp.eq p6,p7=5,r17 // is IFA pointing into to region 5? - shr.u r18=r22,PGDIR_SHIFT // get bits 33-63 of the faulting address + shr.u r18=r22,PGDIR_SHIFT // get bottom portion of pgd index bit ;; (p7) dep r17=r17,r19,(PAGE_SHIFT-3),3 // put region number bits in place @@ -137,38 +138,38 @@ ENTRY(vhpt_miss) (p6) shr.u r21=r21,PGDIR_SHIFT+PAGE_SHIFT (p7) shr.u r21=r21,PGDIR_SHIFT+PAGE_SHIFT-3 ;; -(p6) dep r17=r18,r19,3,(PAGE_SHIFT-3) // r17=PTA + IFA(33,42)*8 -(p7) dep r17=r18,r17,3,(PAGE_SHIFT-6) // r17=PTA + (((IFA(61,63) << 7) | IFA(33,39))*8) +(p6) dep r17=r18,r19,3,(PAGE_SHIFT-3) // r17=pgd_offset for region 5 +(p7) dep r17=r18,r17,3,(PAGE_SHIFT-6) // r17=pgd_offset for region[0-4] cmp.eq p7,p6=0,r21 // unused address bits all zeroes? #ifdef CONFIG_PGTABLE_4 - shr.u r28=r22,PUD_SHIFT // shift L2 index into position + shr.u r28=r22,PUD_SHIFT // shift pud index into position #else - shr.u r18=r22,PMD_SHIFT // shift L3 index into position + shr.u r18=r22,PMD_SHIFT // shift pmd index into position #endif ;; - ld8 r17=[r17] // fetch the L1 entry (may be 0) + ld8 r17=[r17] // get *pgd (may be 0) ;; -(p7) cmp.eq p6,p7=r17,r0 // was L1 entry NULL? +(p7) cmp.eq p6,p7=r17,r0 // was pgd_present(*pgd) == NULL? #ifdef CONFIG_PGTABLE_4 - dep r28=r28,r17,3,(PAGE_SHIFT-3) // compute address of L2 page table entry + dep r28=r28,r17,3,(PAGE_SHIFT-3) // r28=pud_offset(pgd,addr) ;; - shr.u r18=r22,PMD_SHIFT // shift L3 index into position -(p7) ld8 r29=[r28] // fetch the L2 entry (may be 0) + shr.u r18=r22,PMD_SHIFT // shift pmd index into position +(p7) ld8 r29=[r28] // get *pud (may be 0) ;; -(p7) cmp.eq.or.andcm p6,p7=r29,r0 // was L2 entry NULL? - dep r17=r18,r29,3,(PAGE_SHIFT-3) // compute address of L3 page table entry +(p7) cmp.eq.or.andcm p6,p7=r29,r0 // was pud_present(*pud) == NULL? + dep r17=r18,r29,3,(PAGE_SHIFT-3) // r17=pmd_offset(pud,addr) #else - dep r17=r18,r17,3,(PAGE_SHIFT-3) // compute address of L3 page table entry + dep r17=r18,r17,3,(PAGE_SHIFT-3) // r17=pmd_offset(pgd,addr) #endif ;; -(p7) ld8 r20=[r17] // fetch the L3 entry (may be 0) - shr.u r19=r22,PAGE_SHIFT // shift L4 index into position +(p7) ld8 r20=[r17] // get *pmd (may be 0) + shr.u r19=r22,PAGE_SHIFT // shift pte index into position ;; -(p7) cmp.eq.or.andcm p6,p7=r20,r0 // was L3 entry NULL? - dep r21=r19,r20,3,(PAGE_SHIFT-3) // compute address of L4 page table entry +(p7) cmp.eq.or.andcm p6,p7=r20,r0 // was pmd_present(*pmd) == NULL? + dep r21=r19,r20,3,(PAGE_SHIFT-3) // r21=pte_offset(pmd,addr) ;; -(p7) ld8 r18=[r21] // read the L4 PTE - mov r19=cr.isr // cr.isr bit 0 tells us if this is an insn miss +(p7) ld8 r18=[r21] // read *pte + mov r19=cr.isr // cr.isr bit 32 tells us if this is an insn miss ;; (p7) tbit.z p6,p7=r18,_PAGE_P_BIT // page present bit cleared? mov r22=cr.iha // get the VHPT address that caused the TLB miss @@ -202,25 +203,33 @@ ENTRY(vhpt_miss) dv_serialize_data /* - * Re-check L2 and L3 pagetable. If they changed, we may have received a ptc.g + * Re-check pagetable entry. If they changed, we may have received a ptc.g * between reading the pagetable and the "itc". If so, flush the entry we - * inserted and retry. + * inserted and retry. At this point, we have: + * + * r28 = equivalent of pud_offset(pgd, ifa) + * r17 = equivalent of pmd_offset(pud, ifa) + * r21 = equivalent of pte_offset(pmd, ifa) + * + * r29 = *pud + * r20 = *pmd + * r18 = *pte */ - ld8 r25=[r21] // read L4 entry again - ld8 r26=[r17] // read L3 PTE again + ld8 r25=[r21] // read *pte again + ld8 r26=[r17] // read *pmd again #ifdef CONFIG_PGTABLE_4 - ld8 r19=[r28] // read L2 entry again + ld8 r19=[r28] // read *pud again #endif cmp.ne p6,p7=r0,r0 ;; - cmp.ne.or.andcm p6,p7=r26,r20 // did L3 entry change + cmp.ne.or.andcm p6,p7=r26,r20 // did *pmd change #ifdef CONFIG_PGTABLE_4 - cmp.ne.or.andcm p6,p7=r19,r29 // did L4 PTE change + cmp.ne.or.andcm p6,p7=r19,r29 // did *pud change #endif mov r27=PAGE_SHIFT<<2 ;; (p6) ptc.l r22,r27 // purge PTE page translation -(p7) cmp.ne.or.andcm p6,p7=r25,r18 // did L4 PTE change +(p7) cmp.ne.or.andcm p6,p7=r25,r18 // did *pte change ;; (p6) ptc.l r16,r27 // purge translation #endif @@ -235,19 +244,19 @@ END(vhpt_miss) ENTRY(itlb_miss) DBG_FAULT(1) /* - * The ITLB handler accesses the L3 PTE via the virtually mapped linear + * The ITLB handler accesses the PTE via the virtually mapped linear * page table. If a nested TLB miss occurs, we switch into physical - * mode, walk the page table, and then re-execute the L3 PTE read - * and go on normally after that. + * mode, walk the page table, and then re-execute the PTE read and + * go on normally after that. */ mov r16=cr.ifa // get virtual address mov r29=b0 // save b0 mov r31=pr // save predicates .itlb_fault: - mov r17=cr.iha // get virtual address of L3 PTE + mov r17=cr.iha // get virtual address of PTE movl r30=1f // load nested fault continuation point ;; -1: ld8 r18=[r17] // read L3 PTE +1: ld8 r18=[r17] // read *pte ;; mov b0=r29 tbit.z p6,p0=r18,_PAGE_P_BIT // page present bit cleared? @@ -262,7 +271,7 @@ ENTRY(itlb_miss) */ dv_serialize_data - ld8 r19=[r17] // read L3 PTE again and see if same + ld8 r19=[r17] // read *pte again and see if same mov r20=PAGE_SHIFT<<2 // setup page size for purge ;; cmp.ne p7,p0=r18,r19 @@ -279,19 +288,19 @@ END(itlb_miss) ENTRY(dtlb_miss) DBG_FAULT(2) /* - * The DTLB handler accesses the L3 PTE via the virtually mapped linear + * The DTLB handler accesses the PTE via the virtually mapped linear * page table. If a nested TLB miss occurs, we switch into physical - * mode, walk the page table, and then re-execute the L3 PTE read - * and go on normally after that. + * mode, walk the page table, and then re-execute the PTE read and + * go on normally after that. */ mov r16=cr.ifa // get virtual address mov r29=b0 // save b0 mov r31=pr // save predicates dtlb_fault: - mov r17=cr.iha // get virtual address of L3 PTE + mov r17=cr.iha // get virtual address of PTE movl r30=1f // load nested fault continuation point ;; -1: ld8 r18=[r17] // read L3 PTE +1: ld8 r18=[r17] // read *pte ;; mov b0=r29 tbit.z p6,p0=r18,_PAGE_P_BIT // page present bit cleared? @@ -306,7 +315,7 @@ dtlb_fault: */ dv_serialize_data - ld8 r19=[r17] // read L3 PTE again and see if same + ld8 r19=[r17] // read *pte again and see if same mov r20=PAGE_SHIFT<<2 // setup page size for purge ;; cmp.ne p7,p0=r18,r19 @@ -420,7 +429,7 @@ ENTRY(nested_dtlb_miss) * r30: continuation address * r31: saved pr * - * Output: r17: physical address of L3 PTE of faulting address + * Output: r17: physical address of PTE of faulting address * r29: saved b0 * r30: continuation address * r31: saved pr @@ -450,33 +459,33 @@ ENTRY(nested_dtlb_miss) (p6) shr.u r21=r21,PGDIR_SHIFT+PAGE_SHIFT (p7) shr.u r21=r21,PGDIR_SHIFT+PAGE_SHIFT-3 ;; -(p6) dep r17=r18,r19,3,(PAGE_SHIFT-3) // r17=PTA + IFA(33,42)*8 -(p7) dep r17=r18,r17,3,(PAGE_SHIFT-6) // r17=PTA + (((IFA(61,63) << 7) | IFA(33,39))*8) +(p6) dep r17=r18,r19,3,(PAGE_SHIFT-3) // r17=pgd_offset for region 5 +(p7) dep r17=r18,r17,3,(PAGE_SHIFT-6) // r17=pgd_offset for region[0-4] cmp.eq p7,p6=0,r21 // unused address bits all zeroes? #ifdef CONFIG_PGTABLE_4 - shr.u r18=r22,PUD_SHIFT // shift L2 index into position + shr.u r18=r22,PUD_SHIFT // shift pud index into position #else - shr.u r18=r22,PMD_SHIFT // shift L3 index into position + shr.u r18=r22,PMD_SHIFT // shift pmd index into position #endif ;; - ld8 r17=[r17] // fetch the L1 entry (may be 0) + ld8 r17=[r17] // get *pgd (may be 0) ;; -(p7) cmp.eq p6,p7=r17,r0 // was L1 entry NULL? - dep r17=r18,r17,3,(PAGE_SHIFT-3) // compute address of L2 page table entry +(p7) cmp.eq p6,p7=r17,r0 // was pgd_present(*pgd) == NULL? + dep r17=r18,r17,3,(PAGE_SHIFT-3) // r17=p[u|m]d_offset(pgd,addr) ;; #ifdef CONFIG_PGTABLE_4 -(p7) ld8 r17=[r17] // fetch the L2 entry (may be 0) - shr.u r18=r22,PMD_SHIFT // shift L3 index into position +(p7) ld8 r17=[r17] // get *pud (may be 0) + shr.u r18=r22,PMD_SHIFT // shift pmd index into position ;; -(p7) cmp.eq.or.andcm p6,p7=r17,r0 // was L2 entry NULL? - dep r17=r18,r17,3,(PAGE_SHIFT-3) // compute address of L2 page table entry +(p7) cmp.eq.or.andcm p6,p7=r17,r0 // was pud_present(*pud) == NULL? + dep r17=r18,r17,3,(PAGE_SHIFT-3) // r17=pmd_offset(pud,addr) ;; #endif -(p7) ld8 r17=[r17] // fetch the L3 entry (may be 0) - shr.u r19=r22,PAGE_SHIFT // shift L4 index into position +(p7) ld8 r17=[r17] // get *pmd (may be 0) + shr.u r19=r22,PAGE_SHIFT // shift pte index into position ;; -(p7) cmp.eq.or.andcm p6,p7=r17,r0 // was L3 entry NULL? - dep r17=r19,r17,3,(PAGE_SHIFT-3) // compute address of L4 page table entry +(p7) cmp.eq.or.andcm p6,p7=r17,r0 // was pmd_present(*pmd) == NULL? + dep r17=r19,r17,3,(PAGE_SHIFT-3) // r17=pte_offset(pmd,addr); (p6) br.cond.spnt page_fault mov b0=r30 br.sptk.many b0 // return to continuation point From d2a33170972c5772826f7f6cc950ab69ba034667 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 17 Nov 2005 20:34:35 +1100 Subject: [PATCH 06/35] [PATCH] powerpc: Fix typo in topology.h The fix to topology.h (5cfccd7f132432dd4705444a44b51d12ef88a85f) seems to have a typeo, struct sched_domain has an idle_idx member but not an idle_id member. I assume this is the fix. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- include/asm-powerpc/topology.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/asm-powerpc/topology.h b/include/asm-powerpc/topology.h index 0e8c20c96062..db8095cbe09b 100644 --- a/include/asm-powerpc/topology.h +++ b/include/asm-powerpc/topology.h @@ -42,7 +42,7 @@ static inline int node_to_first_cpu(int node) .cache_nice_tries = 1, \ .per_cpu_gain = 100, \ .busy_idx = 3, \ - .idle_id = 1, \ + .idle_idx = 1, \ .newidle_idx = 2, \ .wake_idx = 1, \ .flags = SD_LOAD_BALANCE \ From 68643cfb879ad8c327441f875b60981822016575 Mon Sep 17 00:00:00 2001 From: Olaf Hering Date: Thu, 17 Nov 2005 22:09:02 +0100 Subject: [PATCH 07/35] [PATCH] ppc boot: replace string labels with numbers Replacing the string labels with numbers saves 117 bytes in the final zImage. These local labels are not discared. Signed-off-by: Olaf Hering arch/powerpc/boot/crt0.S | 23 +++++++++++------------ 1 files changed, 11 insertions(+), 12 deletions(-) Signed-off-by: Paul Mackerras --- arch/powerpc/boot/crt0.S | 23 +++++++++++------------ 1 file changed, 11 insertions(+), 12 deletions(-) diff --git a/arch/powerpc/boot/crt0.S b/arch/powerpc/boot/crt0.S index 9cc442263939..d2f2ace56cd3 100644 --- a/arch/powerpc/boot/crt0.S +++ b/arch/powerpc/boot/crt0.S @@ -14,43 +14,42 @@ .text .globl _zimage_start _zimage_start: - bl reloc_offset + bl 1f -reloc_offset: +1: mflr r0 - lis r9,reloc_offset@ha - addi r9,r9,reloc_offset@l + lis r9,1b@ha + addi r9,r9,1b@l subf. r0,r9,r0 - beq clear_caches + beq 3f -reloc_got2: lis r9,__got2_start@ha addi r9,r9,__got2_start@l lis r8,__got2_end@ha addi r8,r8,__got2_end@l subf. r8,r9,r8 - beq clear_caches + beq 3f srwi. r8,r8,2 mtctr r8 add r9,r0,r9 -reloc_got2_loop: +2: lwz r8,0(r9) add r8,r8,r0 stw r8,0(r9) addi r9,r9,4 - bdnz reloc_got2_loop + bdnz 2b -clear_caches: +3: lis r9,_start@h add r9,r0,r9 lis r8,_etext@ha addi r8,r8,_etext@l add r8,r0,r8 -1: dcbf r0,r9 +4: dcbf r0,r9 icbi r0,r9 addi r9,r9,0x20 cmplwi 0,r9,8 - blt 1b + blt 4b sync isync From a097a35c9a6de6316c18a3e914c64400b5a6db57 Mon Sep 17 00:00:00 2001 From: Segher Boessenkool Date: Thu, 17 Nov 2005 22:22:14 +0100 Subject: [PATCH 08/35] [PATCH] powerpc: Maple: request I/O resource. Reserve the Maple RTC I/O resource. Needed now we use genrtc. Signed-off-by: Segher Boessenkool Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/maple/time.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/platforms/maple/time.c b/arch/powerpc/platforms/maple/time.c index 40fc07a8e606..15846cc938ac 100644 --- a/arch/powerpc/platforms/maple/time.c +++ b/arch/powerpc/platforms/maple/time.c @@ -158,6 +158,11 @@ int maple_set_rtc_time(struct rtc_time *tm) return 0; } +static struct resource rtc_iores = { + .name = "rtc", + .flags = IORESOURCE_BUSY, +}; + unsigned long __init maple_get_boot_time(void) { struct rtc_time tm; @@ -172,7 +177,11 @@ unsigned long __init maple_get_boot_time(void) printk(KERN_INFO "Maple: No device node for RTC, assuming " "legacy address (0x%x)\n", maple_rtc_addr); } - + + rtc_iores.start = maple_rtc_addr; + rtc_iores.end = maple_rtc_addr + 7; + request_resource(&ioport_resource, &rtc_iores); + maple_get_rtc_time(&tm); return mktime(tm.tm_year+1900, tm.tm_mon+1, tm.tm_mday, tm.tm_hour, tm.tm_min, tm.tm_sec); From 6760a1bdf56de6e1a30399d9069b94bfea59c13d Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 17 Nov 2005 17:05:02 -0600 Subject: [PATCH 09/35] [PATCH] ppc: Fix MPC83xx device table The SVRs for MPC8343/E were incorrect and really the SVRs for MPC8347/E. Signed-off-by: David Updegraff Signed-off-by: Kumar Gala Signed-off-by: Paul Mackerras --- arch/ppc/syslib/mpc83xx_sys.c | 28 ++++++++++++++++++++++++++-- 1 file changed, 26 insertions(+), 2 deletions(-) diff --git a/arch/ppc/syslib/mpc83xx_sys.c b/arch/ppc/syslib/mpc83xx_sys.c index a1523989aff4..82cf3ab77f4a 100644 --- a/arch/ppc/syslib/mpc83xx_sys.c +++ b/arch/ppc/syslib/mpc83xx_sys.c @@ -69,9 +69,33 @@ struct ppc_sys_spec ppc_sys_specs[] = { }, }, { - .ppc_sys_name = "8343E", + .ppc_sys_name = "8347E", .mask = 0xFFFF0000, .value = 0x80540000, + .num_devices = 9, + .device_list = (enum ppc_sys_devices[]) + { + MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1, + MPC83xx_IIC2, MPC83xx_DUART, MPC83xx_SEC2, + MPC83xx_USB2_DR, MPC83xx_USB2_MPH, MPC83xx_MDIO + }, + }, + { + .ppc_sys_name = "8347", + .mask = 0xFFFF0000, + .value = 0x80550000, + .num_devices = 8, + .device_list = (enum ppc_sys_devices[]) + { + MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1, + MPC83xx_IIC2, MPC83xx_DUART, + MPC83xx_USB2_DR, MPC83xx_USB2_MPH, MPC83xx_MDIO + }, + }, + { + .ppc_sys_name = "8343E", + .mask = 0xFFFF0000, + .value = 0x80560000, .num_devices = 8, .device_list = (enum ppc_sys_devices[]) { @@ -83,7 +107,7 @@ struct ppc_sys_spec ppc_sys_specs[] = { { .ppc_sys_name = "8343", .mask = 0xFFFF0000, - .value = 0x80550000, + .value = 0x80570000, .num_devices = 7, .device_list = (enum ppc_sys_devices[]) { From fe7bce5ef70105a6546dc9b5c354219b9f6ea991 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 17 Nov 2005 17:45:40 -0600 Subject: [PATCH 10/35] [PATCH] ppc: Fix warnings related to seq_file When we moved things around in irq.h seq_file became an issue. Fix warnings related to its usage. Signed-off-by: Kumar Gala Signed-off-by: Paul Mackerras --- arch/ppc/platforms/85xx/mpc85xx_ads_common.h | 2 ++ arch/ppc/platforms/85xx/stx_gp3.h | 2 -- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/ppc/platforms/85xx/mpc85xx_ads_common.h b/arch/ppc/platforms/85xx/mpc85xx_ads_common.h index 7b26bcc5d10d..198a6a02cde8 100644 --- a/arch/ppc/platforms/85xx/mpc85xx_ads_common.h +++ b/arch/ppc/platforms/85xx/mpc85xx_ads_common.h @@ -25,6 +25,8 @@ #define BCSR_ADDR ((uint)0xf8000000) #define BCSR_SIZE ((uint)(32 * 1024)) +struct seq_file; + extern int mpc85xx_ads_show_cpuinfo(struct seq_file *m); extern void mpc85xx_ads_init_IRQ(void) __init; extern void mpc85xx_ads_map_io(void) __init; diff --git a/arch/ppc/platforms/85xx/stx_gp3.h b/arch/ppc/platforms/85xx/stx_gp3.h index 7bcc6c35a417..2f25b5195152 100644 --- a/arch/ppc/platforms/85xx/stx_gp3.h +++ b/arch/ppc/platforms/85xx/stx_gp3.h @@ -21,7 +21,6 @@ #include #include -#include #include #define BOARD_CCSRBAR ((uint)0xe0000000) @@ -43,7 +42,6 @@ extern void mpc85xx_setup_hose(void) __init; extern void mpc85xx_restart(char *cmd); extern void mpc85xx_power_off(void); extern void mpc85xx_halt(void); -extern int mpc85xx_show_cpuinfo(struct seq_file *m); extern void mpc85xx_init_IRQ(void) __init; extern unsigned long mpc85xx_find_end_of_memory(void) __init; extern void mpc85xx_calibrate_decr(void) __init; From 6defa38b3754c84cd3449447477aed81ea979407 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Fri, 18 Nov 2005 13:44:17 +1100 Subject: [PATCH 11/35] powerpc: Fix delay functions for 601 processors My earlier merge of delay.h introduced a timebase-based udelay for 32-bit machines but also broke the 601, which doesn't have the timebase register. This fixes it by using the 601's RTC register on the 601, and also moves __delay() and udelay() to be out-of-line in arch/powerpc/kernel/time.c. These functions aren't really performance critical, after all. Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/misc_32.S | 8 ------- arch/powerpc/kernel/time.c | 28 ++++++++++++++++++++++++ include/asm-powerpc/delay.h | 40 ++--------------------------------- 3 files changed, 30 insertions(+), 46 deletions(-) diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S index f6d84a75ed26..624a983a9676 100644 --- a/arch/powerpc/kernel/misc_32.S +++ b/arch/powerpc/kernel/misc_32.S @@ -27,14 +27,6 @@ .text - .align 5 -_GLOBAL(__delay) - cmpwi 0,r3,0 - mtctr r3 - beqlr -1: bdnz 1b - blr - /* * This returns the high 64 bits of the product of two 64-bit numbers. */ diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 070b4b458aaf..de8479769bb7 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -130,6 +130,34 @@ unsigned long tb_last_stamp; */ DEFINE_PER_CPU(unsigned long, last_jiffy); +void __delay(unsigned long loops) +{ + unsigned long start; + int diff; + + if (__USE_RTC()) { + start = get_rtcl(); + do { + /* the RTCL register wraps at 1000000000 */ + diff = get_rtcl() - start; + if (diff < 0) + diff += 1000000000; + } while (diff < loops); + } else { + start = get_tbl(); + while (get_tbl() - start < loops) + HMT_low(); + HMT_medium(); + } +} +EXPORT_SYMBOL(__delay); + +void udelay(unsigned long usecs) +{ + __delay(tb_ticks_per_usec * usecs); +} +EXPORT_SYMBOL(udelay); + static __inline__ void timer_check_rtc(void) { /* diff --git a/include/asm-powerpc/delay.h b/include/asm-powerpc/delay.h index 1492aa9ab716..54fe1f4f8fd0 100644 --- a/include/asm-powerpc/delay.h +++ b/include/asm-powerpc/delay.h @@ -13,43 +13,7 @@ * Anton Blanchard. */ -extern unsigned long tb_ticks_per_usec; - -#ifdef CONFIG_PPC64 -/* define these here to prevent circular dependencies */ -/* these instructions control the thread priority on multi-threaded cpus */ -#define __HMT_low() asm volatile("or 1,1,1") -#define __HMT_medium() asm volatile("or 2,2,2") -#else -#define __HMT_low() -#define __HMT_medium() -#endif - -#define __barrier() asm volatile("" ::: "memory") - -static inline unsigned long __get_tb(void) -{ - unsigned long rval; - - asm volatile("mftb %0" : "=r" (rval)); - return rval; -} - -static inline void __delay(unsigned long loops) -{ - unsigned long start = __get_tb(); - - while((__get_tb() - start) < loops) - __HMT_low(); - __HMT_medium(); - __barrier(); -} - -static inline void udelay(unsigned long usecs) -{ - unsigned long loops = tb_ticks_per_usec * usecs; - - __delay(loops); -} +extern void __delay(unsigned long loops); +extern void udelay(unsigned long usecs); #endif /* _ASM_POWERPC_DELAY_H */ From 5daf9071b527089b1bd5d9cb3a5354b83121550e Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 18 Nov 2005 14:09:41 +1100 Subject: [PATCH 12/35] [PATCH] powerpc: merge align.c This patch merges align.c, the result isn't quite what was in ppc64 nor what was in ppc32 :) It should implement all the functionalities of both though. Kumar, since you played with that in the past, I suppose you have some test cases for verifying that it works properly before I dig out the 601 machine ? :) Since it's likely that I won't be able to test all scenario, code inspection is much welcome. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/Makefile | 2 +- arch/{ppc64 => powerpc}/kernel/align.c | 396 ++++++++++++++++-------- arch/ppc/kernel/Makefile | 4 +- arch/ppc/kernel/align.c | 410 ------------------------- arch/ppc64/kernel/Makefile | 2 +- include/asm-powerpc/cputable.h | 22 +- 6 files changed, 281 insertions(+), 555 deletions(-) rename arch/{ppc64 => powerpc}/kernel/align.c (51%) delete mode 100644 arch/ppc/kernel/align.c diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 4970e3721a84..0e679afb2e20 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -12,7 +12,7 @@ CFLAGS_btext.o += -fPIC endif obj-y := semaphore.o cputable.o ptrace.o syscalls.o \ - irq.o signal_32.o pmc.o vdso.o + irq.o align.o signal_32.o pmc.o vdso.o obj-y += vdso32/ obj-$(CONFIG_PPC64) += setup_64.o binfmt_elf32.o sys_ppc32.o \ signal_64.o ptrace32.o systbl.o \ diff --git a/arch/ppc64/kernel/align.c b/arch/powerpc/kernel/align.c similarity index 51% rename from arch/ppc64/kernel/align.c rename to arch/powerpc/kernel/align.c index 256d5b592aa1..faaec9c6f78f 100644 --- a/arch/ppc64/kernel/align.c +++ b/arch/powerpc/kernel/align.c @@ -7,6 +7,9 @@ * PowerPC 403GCX/405GP modifications. * Copyright (c) 2001-2002 PPC64 team, IBM Corp * 64-bit and Power4 support + * Copyright (c) 2005 Benjamin Herrenschmidt, IBM Corp + * + * Merge ppc32 and ppc64 implementations * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -38,10 +41,15 @@ struct aligninfo { #define F 8 /* to/from fp regs */ #define U 0x10 /* update index register */ #define M 0x20 /* multiple load/store */ -#define SW 0x40 /* byte swap */ +#define SW 0x40 /* byte swap int or ... */ +#define S 0x40 /* ... single-precision fp */ +#define SX 0x40 /* byte count in XER */ +#define HARD 0x80 /* string, stwcx. */ #define DCBZ 0x5f /* 8xx/82xx dcbz faults when cache not enabled */ +#define SWAP(a, b) (t = (a), (a) = (b), (b) = t) + /* * The PowerPC stores certain bits of the instruction that caused the * alignment exception in the DSISR register. This array maps those @@ -57,14 +65,14 @@ static struct aligninfo aligninfo[128] = { { 2, LD+SE }, /* 00 0 0101: lha */ { 2, ST }, /* 00 0 0110: sth */ { 4, LD+M }, /* 00 0 0111: lmw */ - { 4, LD+F }, /* 00 0 1000: lfs */ + { 4, LD+F+S }, /* 00 0 1000: lfs */ { 8, LD+F }, /* 00 0 1001: lfd */ - { 4, ST+F }, /* 00 0 1010: stfs */ + { 4, ST+F+S }, /* 00 0 1010: stfs */ { 8, ST+F }, /* 00 0 1011: stfd */ INVALID, /* 00 0 1100 */ - { 8, LD }, /* 00 0 1101: ld */ + { 8, LD }, /* 00 0 1101: ld/ldu/lwa */ INVALID, /* 00 0 1110 */ - { 8, ST }, /* 00 0 1111: std */ + { 8, ST }, /* 00 0 1111: std/stdu */ { 4, LD+U }, /* 00 1 0000: lwzu */ INVALID, /* 00 1 0001 */ { 4, ST+U }, /* 00 1 0010: stwu */ @@ -73,9 +81,9 @@ static struct aligninfo aligninfo[128] = { { 2, LD+SE+U }, /* 00 1 0101: lhau */ { 2, ST+U }, /* 00 1 0110: sthu */ { 4, ST+M }, /* 00 1 0111: stmw */ - { 4, LD+F+U }, /* 00 1 1000: lfsu */ + { 4, LD+F+S+U }, /* 00 1 1000: lfsu */ { 8, LD+F+U }, /* 00 1 1001: lfdu */ - { 4, ST+F+U }, /* 00 1 1010: stfsu */ + { 4, ST+F+S+U }, /* 00 1 1010: stfsu */ { 8, ST+F+U }, /* 00 1 1011: stfdu */ INVALID, /* 00 1 1100 */ INVALID, /* 00 1 1101 */ @@ -89,10 +97,10 @@ static struct aligninfo aligninfo[128] = { { 4, LD+SE }, /* 01 0 0101: lwax */ INVALID, /* 01 0 0110 */ INVALID, /* 01 0 0111 */ - { 0, LD }, /* 01 0 1000: lswx */ - { 0, LD }, /* 01 0 1001: lswi */ - { 0, ST }, /* 01 0 1010: stswx */ - { 0, ST }, /* 01 0 1011: stswi */ + { 4, LD+M+HARD+SX }, /* 01 0 1000: lswx */ + { 4, LD+M+HARD }, /* 01 0 1001: lswi */ + { 4, ST+M+HARD+SX }, /* 01 0 1010: stswx */ + { 4, ST+M+HARD }, /* 01 0 1011: stswi */ INVALID, /* 01 0 1100 */ { 8, LD+U }, /* 01 0 1101: ldu */ INVALID, /* 01 0 1110 */ @@ -115,7 +123,7 @@ static struct aligninfo aligninfo[128] = { INVALID, /* 01 1 1111 */ INVALID, /* 10 0 0000 */ INVALID, /* 10 0 0001 */ - { 0, ST }, /* 10 0 0010: stwcx. */ + INVALID, /* 10 0 0010: stwcx. */ INVALID, /* 10 0 0011 */ INVALID, /* 10 0 0100 */ INVALID, /* 10 0 0101 */ @@ -144,7 +152,7 @@ static struct aligninfo aligninfo[128] = { INVALID, /* 10 1 1100 */ INVALID, /* 10 1 1101 */ INVALID, /* 10 1 1110 */ - { L1_CACHE_BYTES, ST }, /* 10 1 1111: dcbz */ + { 0, ST+HARD }, /* 10 1 1111: dcbz */ { 4, LD }, /* 11 0 0000: lwzx */ INVALID, /* 11 0 0001 */ { 4, ST }, /* 11 0 0010: stwx */ @@ -153,9 +161,9 @@ static struct aligninfo aligninfo[128] = { { 2, LD+SE }, /* 11 0 0101: lhax */ { 2, ST }, /* 11 0 0110: sthx */ INVALID, /* 11 0 0111 */ - { 4, LD+F }, /* 11 0 1000: lfsx */ + { 4, LD+F+S }, /* 11 0 1000: lfsx */ { 8, LD+F }, /* 11 0 1001: lfdx */ - { 4, ST+F }, /* 11 0 1010: stfsx */ + { 4, ST+F+S }, /* 11 0 1010: stfsx */ { 8, ST+F }, /* 11 0 1011: stfdx */ INVALID, /* 11 0 1100 */ { 8, LD+M }, /* 11 0 1101: lmd */ @@ -169,9 +177,9 @@ static struct aligninfo aligninfo[128] = { { 2, LD+SE+U }, /* 11 1 0101: lhaux */ { 2, ST+U }, /* 11 1 0110: sthux */ INVALID, /* 11 1 0111 */ - { 4, LD+F+U }, /* 11 1 1000: lfsux */ + { 4, LD+F+S+U }, /* 11 1 1000: lfsux */ { 8, LD+F+U }, /* 11 1 1001: lfdux */ - { 4, ST+F+U }, /* 11 1 1010: stfsux */ + { 4, ST+F+S+U }, /* 11 1 1010: stfsux */ { 8, ST+F+U }, /* 11 1 1011: stfdux */ INVALID, /* 11 1 1100 */ INVALID, /* 11 1 1101 */ @@ -179,45 +187,175 @@ static struct aligninfo aligninfo[128] = { INVALID, /* 11 1 1111 */ }; -#define SWAP(a, b) (t = (a), (a) = (b), (b) = t) - +/* + * Create a DSISR value from the instruction + */ static inline unsigned make_dsisr(unsigned instr) { unsigned dsisr; - - /* create a DSISR value from the instruction */ - dsisr = (instr & 0x03ff0000) >> 16; /* bits 6:15 --> 22:31 */ - - if ( IS_XFORM(instr) ) { - dsisr |= (instr & 0x00000006) << 14; /* bits 29:30 --> 15:16 */ - dsisr |= (instr & 0x00000040) << 8; /* bit 25 --> 17 */ - dsisr |= (instr & 0x00000780) << 3; /* bits 21:24 --> 18:21 */ + + + /* bits 6:15 --> 22:31 */ + dsisr = (instr & 0x03ff0000) >> 16; + + if (IS_XFORM(instr)) { + /* bits 29:30 --> 15:16 */ + dsisr |= (instr & 0x00000006) << 14; + /* bit 25 --> 17 */ + dsisr |= (instr & 0x00000040) << 8; + /* bits 21:24 --> 18:21 */ + dsisr |= (instr & 0x00000780) << 3; + } else { + /* bit 5 --> 17 */ + dsisr |= (instr & 0x04000000) >> 12; + /* bits 1: 4 --> 18:21 */ + dsisr |= (instr & 0x78000000) >> 17; + /* bits 30:31 --> 12:13 */ + if (IS_DSFORM(instr)) + dsisr |= (instr & 0x00000003) << 18; } - else { - dsisr |= (instr & 0x04000000) >> 12; /* bit 5 --> 17 */ - dsisr |= (instr & 0x78000000) >> 17; /* bits 1: 4 --> 18:21 */ - if ( IS_DSFORM(instr) ) { - dsisr |= (instr & 0x00000003) << 18; /* bits 30:31 --> 12:13 */ - } - } - + return dsisr; } -int -fix_alignment(struct pt_regs *regs) +/* + * The dcbz (data cache block zero) instruction + * gives an alignment fault if used on non-cacheable + * memory. We handle the fault mainly for the + * case when we are running with the cache disabled + * for debugging. + */ +static int emulate_dcbz(struct pt_regs *regs, unsigned char __user *addr) +{ + long __user *p; + int i, size; + +#ifdef __powerpc64__ + size = ppc64_caches.dline_size; +#else + size = L1_CACHE_BYTES; +#endif + p = (long __user *) (regs->dar & -size); + if (user_mode(regs) && !access_ok(VERIFY_WRITE, p, size)) + return -EFAULT; + for (i = 0; i < size / sizeof(long); ++i) + if (__put_user(0, p+i)) + return -EFAULT; + return 1; +} + +/* + * Emulate load & store multiple instructions + * On 64-bit machines, these instructions only affect/use the + * bottom 4 bytes of each register, and the loads clear the + * top 4 bytes of the affected register. + */ +#ifdef CONFIG_PPC64 +#define REG_BYTE(rp, i) *((u8 *)((rp) + ((i) >> 2)) + ((i) & 3) + 4) +#else +#define REG_BYTE(rp, i) *((u8 *)(rp) + (i)) +#endif + +static int emulate_multiple(struct pt_regs *regs, unsigned char __user *addr, + unsigned int reg, unsigned int nb, + unsigned int flags, unsigned int instr) +{ + unsigned long *rptr; + unsigned int nb0, i; + + /* + * We do not try to emulate 8 bytes multiple as they aren't really + * available in our operating environments and we don't try to + * emulate multiples operations in kernel land as they should never + * be used/generated there at least not on unaligned boundaries + */ + if (unlikely((nb > 4) || !user_mode(regs))) + return 0; + + /* lmw, stmw, lswi/x, stswi/x */ + nb0 = 0; + if (flags & HARD) { + if (flags & SX) { + nb = regs->xer & 127; + if (nb == 0) + return 1; + } else { + if (__get_user(instr, + (unsigned int __user *)regs->nip)) + return -EFAULT; + nb = (instr >> 11) & 0x1f; + if (nb == 0) + nb = 32; + } + if (nb + reg * 4 > 128) { + nb0 = nb + reg * 4 - 128; + nb = 128 - reg * 4; + } + } else { + /* lwm, stmw */ + nb = (32 - reg) * 4; + } + + if (!access_ok((flags & ST ? VERIFY_WRITE: VERIFY_READ), addr, nb+nb0)) + return -EFAULT; /* bad address */ + + rptr = ®s->gpr[reg]; + if (flags & LD) { + /* + * This zeroes the top 4 bytes of the affected registers + * in 64-bit mode, and also zeroes out any remaining + * bytes of the last register for lsw*. + */ + memset(rptr, 0, ((nb + 3) / 4) * sizeof(unsigned long)); + if (nb0 > 0) + memset(®s->gpr[0], 0, + ((nb0 + 3) / 4) * sizeof(unsigned long)); + + for (i = 0; i < nb; ++i) + if (__get_user(REG_BYTE(rptr, i), addr + i)) + return -EFAULT; + if (nb0 > 0) { + rptr = ®s->gpr[0]; + addr += nb; + for (i = 0; i < nb0; ++i) + if (__get_user(REG_BYTE(rptr, i), addr + i)) + return -EFAULT; + } + + } else { + for (i = 0; i < nb; ++i) + if (__put_user(REG_BYTE(rptr, i), addr + i)) + return -EFAULT; + if (nb0 > 0) { + rptr = ®s->gpr[0]; + addr += nb; + for (i = 0; i < nb0; ++i) + if (__put_user(REG_BYTE(rptr, i), addr + i)) + return -EFAULT; + } + } + return 1; +} + + +/* + * Called on alignment exception. Attempts to fixup + * + * Return 1 on success + * Return 0 if unable to handle the interrupt + * Return -EFAULT if data address is bad + */ + +int fix_alignment(struct pt_regs *regs) { unsigned int instr, nb, flags; - int t; - unsigned long reg, areg; - unsigned long i; - int ret; - unsigned dsisr; + unsigned int reg, areg; + unsigned int dsisr; unsigned char __user *addr; unsigned char __user *p; - unsigned long __user *lp; + int ret, t; union { - long ll; + u64 ll; double dd; unsigned char v[8]; struct { @@ -231,18 +369,22 @@ fix_alignment(struct pt_regs *regs) } data; /* - * Return 1 on success - * Return 0 if unable to handle the interrupt - * Return -EFAULT if data address is bad + * We require a complete register set, if not, then our assembly + * is broken */ + CHECK_FULL_REGS(regs); dsisr = regs->dsisr; + /* Some processors don't provide us with a DSISR we can use here, + * let's make one up from the instruction + */ if (cpu_has_feature(CPU_FTR_NODSISRALIGN)) { - unsigned int real_instr; - if (__get_user(real_instr, (unsigned int __user *)regs->nip)) - return 0; - dsisr = make_dsisr(real_instr); + unsigned int real_instr; + if (unlikely(__get_user(real_instr, + (unsigned int __user *)regs->nip))) + return -EFAULT; + dsisr = make_dsisr(real_instr); } /* extract the operation and registers from the dsisr */ @@ -258,33 +400,37 @@ fix_alignment(struct pt_regs *regs) /* DAR has the operand effective address */ addr = (unsigned char __user *)regs->dar; - /* A size of 0 indicates an instruction we don't support */ - /* we also don't support the multiples (lmw, stmw, lmd, stmd) */ - if ((nb == 0) || (flags & M)) - return 0; /* too hard or invalid instruction */ - - /* - * Special handling for dcbz - * dcbz may give an alignment exception for accesses to caching inhibited - * storage + /* A size of 0 indicates an instruction we don't support, with + * the exception of DCBZ which is handled as a special case here */ if (instr == DCBZ) - addr = (unsigned char __user *) ((unsigned long)addr & -L1_CACHE_BYTES); + return emulate_dcbz(regs, addr); + if (unlikely(nb == 0)) + return 0; + + /* Load/Store Multiple instructions are handled in their own + * function + */ + if (flags & M) + return emulate_multiple(regs, addr, reg, nb, flags, instr); /* Verify the address of the operand */ - if (user_mode(regs)) { - if (!access_ok((flags & ST? VERIFY_WRITE: VERIFY_READ), addr, nb)) - return -EFAULT; /* bad address */ - } + if (unlikely(user_mode(regs) && + !access_ok((flags & ST ? VERIFY_WRITE : VERIFY_READ), + addr, nb))) + return -EFAULT; /* Force the fprs into the save area so we can reference them */ if (flags & F) { - if (!user_mode(regs)) + /* userland only */ + if (unlikely(!user_mode(regs))) return 0; flush_fp_to_thread(current); } - - /* If we are loading, get the data from user space */ + + /* If we are loading, get the data from user space, else + * get it from register values + */ if (flags & LD) { data.ll = 0; ret = 0; @@ -301,75 +447,62 @@ fix_alignment(struct pt_regs *regs) case 2: ret |= __get_user(data.v[6], p++); ret |= __get_user(data.v[7], p++); - if (ret) + if (unlikely(ret)) return -EFAULT; } - } - - /* If we are storing, get the data from the saved gpr or fpr */ - if (flags & ST) { - if (flags & F) { - if (nb == 4) { - /* Doing stfs, have to convert to single */ - preempt_disable(); - enable_kernel_fp(); - cvt_df(¤t->thread.fpr[reg], (float *)&data.v[4], ¤t->thread); - disable_kernel_fp(); - preempt_enable(); - } - else - data.dd = current->thread.fpr[reg]; - } - else - data.ll = regs->gpr[reg]; - } - - /* Swap bytes as needed */ - if (flags & SW) { - if (nb == 2) - SWAP(data.v[6], data.v[7]); - else { /* nb must be 4 */ - SWAP(data.v[4], data.v[7]); - SWAP(data.v[5], data.v[6]); - } - } - - /* Sign extend as needed */ - if (flags & SE) { + } else if (flags & F) + data.dd = current->thread.fpr[reg]; + else + data.ll = regs->gpr[reg]; + + /* Perform other misc operations like sign extension, byteswap, + * or floating point single precision conversion + */ + switch (flags & ~U) { + case LD+SE: /* sign extend */ if ( nb == 2 ) data.ll = data.x16.low16; else /* nb must be 4 */ data.ll = data.x32.low32; - } - - /* If we are loading, move the data to the gpr or fpr */ - if (flags & LD) { - if (flags & F) { - if (nb == 4) { - /* Doing lfs, have to convert to double */ - preempt_disable(); - enable_kernel_fp(); - cvt_fd((float *)&data.v[4], ¤t->thread.fpr[reg], ¤t->thread); - disable_kernel_fp(); - preempt_enable(); - } - else - current->thread.fpr[reg] = data.dd; + break; + case LD+S: /* byte-swap */ + case ST+S: + if (nb == 2) { + SWAP(data.v[6], data.v[7]); + } else { + SWAP(data.v[4], data.v[7]); + SWAP(data.v[5], data.v[6]); } - else - regs->gpr[reg] = data.ll; + break; + + /* Single-precision FP load and store require conversions... */ + case LD+F+S: +#ifdef CONFIG_PPC_FPU + preempt_disable(); + enable_kernel_fp(); + cvt_fd((float *)&data.v[4], &data.dd, ¤t->thread); + preempt_enable(); +#else + return 0; +#endif + break; + case ST+F+S: +#ifdef CONFIG_PPC_FPU + preempt_disable(); + enable_kernel_fp(); + cvt_df(&data.dd, (float *)&data.v[4], ¤t->thread); + preempt_enable(); +#else + return 0; +#endif + break; } - - /* If we are storing, copy the data to the user */ + + /* Store result to memory or update registers */ if (flags & ST) { ret = 0; p = addr; switch (nb) { - case 128: /* Special case - must be dcbz */ - lp = (unsigned long __user *)p; - for (i = 0; i < L1_CACHE_BYTES / sizeof(long); ++i) - ret |= __put_user(0, lp++); - break; case 8: ret |= __put_user(data.v[0], p++); ret |= __put_user(data.v[1], p++); @@ -382,15 +515,16 @@ fix_alignment(struct pt_regs *regs) ret |= __put_user(data.v[6], p++); ret |= __put_user(data.v[7], p++); } - if (ret) + if (unlikely(ret)) return -EFAULT; - } - + } else if (flags & F) + current->thread.fpr[reg] = data.dd; + else + regs->gpr[reg] = data.ll; + /* Update RA as needed */ - if (flags & U) { + if (flags & U) regs->gpr[areg] = regs->dar; - } return 1; } - diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile index 17a4da65e275..0bb23fce4293 100644 --- a/arch/ppc/kernel/Makefile +++ b/arch/ppc/kernel/Makefile @@ -13,7 +13,7 @@ extra-$(CONFIG_POWER4) += idle_power4.o extra-y += vmlinux.lds obj-y := entry.o traps.o idle.o time.o misc.o \ - process.o align.o \ + process.o \ setup.o \ ppc_htab.o obj-$(CONFIG_6xx) += l2cr.o cpu_setup_6xx.o @@ -38,7 +38,7 @@ endif # These are here while we do the architecture merge else -obj-y := idle.o align.o +obj-y := idle.o obj-$(CONFIG_6xx) += l2cr.o cpu_setup_6xx.o obj-$(CONFIG_SOFTWARE_SUSPEND) += swsusp.o obj-$(CONFIG_MODULES) += module.o diff --git a/arch/ppc/kernel/align.c b/arch/ppc/kernel/align.c deleted file mode 100644 index ab398c4b70b6..000000000000 --- a/arch/ppc/kernel/align.c +++ /dev/null @@ -1,410 +0,0 @@ -/* - * align.c - handle alignment exceptions for the Power PC. - * - * Copyright (c) 1996 Paul Mackerras - * Copyright (c) 1998-1999 TiVo, Inc. - * PowerPC 403GCX modifications. - * Copyright (c) 1999 Grant Erickson - * PowerPC 403GCX/405GP modifications. - */ -#include -#include -#include -#include -#include -#include -#include -#include - -struct aligninfo { - unsigned char len; - unsigned char flags; -}; - -#if defined(CONFIG_4xx) || defined(CONFIG_POWER4) || defined(CONFIG_BOOKE) -#define OPCD(inst) (((inst) & 0xFC000000) >> 26) -#define RS(inst) (((inst) & 0x03E00000) >> 21) -#define RA(inst) (((inst) & 0x001F0000) >> 16) -#define IS_XFORM(code) ((code) == 31) -#endif - -#define INVALID { 0, 0 } - -#define LD 1 /* load */ -#define ST 2 /* store */ -#define SE 4 /* sign-extend value */ -#define F 8 /* to/from fp regs */ -#define U 0x10 /* update index register */ -#define M 0x20 /* multiple load/store */ -#define S 0x40 /* single-precision fp, or byte-swap value */ -#define SX 0x40 /* byte count in XER */ -#define HARD 0x80 /* string, stwcx. */ - -#define DCBZ 0x5f /* 8xx/82xx dcbz faults when cache not enabled */ - -/* - * The PowerPC stores certain bits of the instruction that caused the - * alignment exception in the DSISR register. This array maps those - * bits to information about the operand length and what the - * instruction would do. - */ -static struct aligninfo aligninfo[128] = { - { 4, LD }, /* 00 0 0000: lwz / lwarx */ - INVALID, /* 00 0 0001 */ - { 4, ST }, /* 00 0 0010: stw */ - INVALID, /* 00 0 0011 */ - { 2, LD }, /* 00 0 0100: lhz */ - { 2, LD+SE }, /* 00 0 0101: lha */ - { 2, ST }, /* 00 0 0110: sth */ - { 4, LD+M }, /* 00 0 0111: lmw */ - { 4, LD+F+S }, /* 00 0 1000: lfs */ - { 8, LD+F }, /* 00 0 1001: lfd */ - { 4, ST+F+S }, /* 00 0 1010: stfs */ - { 8, ST+F }, /* 00 0 1011: stfd */ - INVALID, /* 00 0 1100 */ - INVALID, /* 00 0 1101: ld/ldu/lwa */ - INVALID, /* 00 0 1110 */ - INVALID, /* 00 0 1111: std/stdu */ - { 4, LD+U }, /* 00 1 0000: lwzu */ - INVALID, /* 00 1 0001 */ - { 4, ST+U }, /* 00 1 0010: stwu */ - INVALID, /* 00 1 0011 */ - { 2, LD+U }, /* 00 1 0100: lhzu */ - { 2, LD+SE+U }, /* 00 1 0101: lhau */ - { 2, ST+U }, /* 00 1 0110: sthu */ - { 4, ST+M }, /* 00 1 0111: stmw */ - { 4, LD+F+S+U }, /* 00 1 1000: lfsu */ - { 8, LD+F+U }, /* 00 1 1001: lfdu */ - { 4, ST+F+S+U }, /* 00 1 1010: stfsu */ - { 8, ST+F+U }, /* 00 1 1011: stfdu */ - INVALID, /* 00 1 1100 */ - INVALID, /* 00 1 1101 */ - INVALID, /* 00 1 1110 */ - INVALID, /* 00 1 1111 */ - INVALID, /* 01 0 0000: ldx */ - INVALID, /* 01 0 0001 */ - INVALID, /* 01 0 0010: stdx */ - INVALID, /* 01 0 0011 */ - INVALID, /* 01 0 0100 */ - INVALID, /* 01 0 0101: lwax */ - INVALID, /* 01 0 0110 */ - INVALID, /* 01 0 0111 */ - { 4, LD+M+HARD+SX }, /* 01 0 1000: lswx */ - { 4, LD+M+HARD }, /* 01 0 1001: lswi */ - { 4, ST+M+HARD+SX }, /* 01 0 1010: stswx */ - { 4, ST+M+HARD }, /* 01 0 1011: stswi */ - INVALID, /* 01 0 1100 */ - INVALID, /* 01 0 1101 */ - INVALID, /* 01 0 1110 */ - INVALID, /* 01 0 1111 */ - INVALID, /* 01 1 0000: ldux */ - INVALID, /* 01 1 0001 */ - INVALID, /* 01 1 0010: stdux */ - INVALID, /* 01 1 0011 */ - INVALID, /* 01 1 0100 */ - INVALID, /* 01 1 0101: lwaux */ - INVALID, /* 01 1 0110 */ - INVALID, /* 01 1 0111 */ - INVALID, /* 01 1 1000 */ - INVALID, /* 01 1 1001 */ - INVALID, /* 01 1 1010 */ - INVALID, /* 01 1 1011 */ - INVALID, /* 01 1 1100 */ - INVALID, /* 01 1 1101 */ - INVALID, /* 01 1 1110 */ - INVALID, /* 01 1 1111 */ - INVALID, /* 10 0 0000 */ - INVALID, /* 10 0 0001 */ - { 0, ST+HARD }, /* 10 0 0010: stwcx. */ - INVALID, /* 10 0 0011 */ - INVALID, /* 10 0 0100 */ - INVALID, /* 10 0 0101 */ - INVALID, /* 10 0 0110 */ - INVALID, /* 10 0 0111 */ - { 4, LD+S }, /* 10 0 1000: lwbrx */ - INVALID, /* 10 0 1001 */ - { 4, ST+S }, /* 10 0 1010: stwbrx */ - INVALID, /* 10 0 1011 */ - { 2, LD+S }, /* 10 0 1100: lhbrx */ - INVALID, /* 10 0 1101 */ - { 2, ST+S }, /* 10 0 1110: sthbrx */ - INVALID, /* 10 0 1111 */ - INVALID, /* 10 1 0000 */ - INVALID, /* 10 1 0001 */ - INVALID, /* 10 1 0010 */ - INVALID, /* 10 1 0011 */ - INVALID, /* 10 1 0100 */ - INVALID, /* 10 1 0101 */ - INVALID, /* 10 1 0110 */ - INVALID, /* 10 1 0111 */ - INVALID, /* 10 1 1000 */ - INVALID, /* 10 1 1001 */ - INVALID, /* 10 1 1010 */ - INVALID, /* 10 1 1011 */ - INVALID, /* 10 1 1100 */ - INVALID, /* 10 1 1101 */ - INVALID, /* 10 1 1110 */ - { 0, ST+HARD }, /* 10 1 1111: dcbz */ - { 4, LD }, /* 11 0 0000: lwzx */ - INVALID, /* 11 0 0001 */ - { 4, ST }, /* 11 0 0010: stwx */ - INVALID, /* 11 0 0011 */ - { 2, LD }, /* 11 0 0100: lhzx */ - { 2, LD+SE }, /* 11 0 0101: lhax */ - { 2, ST }, /* 11 0 0110: sthx */ - INVALID, /* 11 0 0111 */ - { 4, LD+F+S }, /* 11 0 1000: lfsx */ - { 8, LD+F }, /* 11 0 1001: lfdx */ - { 4, ST+F+S }, /* 11 0 1010: stfsx */ - { 8, ST+F }, /* 11 0 1011: stfdx */ - INVALID, /* 11 0 1100 */ - INVALID, /* 11 0 1101: lmd */ - INVALID, /* 11 0 1110 */ - INVALID, /* 11 0 1111: stmd */ - { 4, LD+U }, /* 11 1 0000: lwzux */ - INVALID, /* 11 1 0001 */ - { 4, ST+U }, /* 11 1 0010: stwux */ - INVALID, /* 11 1 0011 */ - { 2, LD+U }, /* 11 1 0100: lhzux */ - { 2, LD+SE+U }, /* 11 1 0101: lhaux */ - { 2, ST+U }, /* 11 1 0110: sthux */ - INVALID, /* 11 1 0111 */ - { 4, LD+F+S+U }, /* 11 1 1000: lfsux */ - { 8, LD+F+U }, /* 11 1 1001: lfdux */ - { 4, ST+F+S+U }, /* 11 1 1010: stfsux */ - { 8, ST+F+U }, /* 11 1 1011: stfdux */ - INVALID, /* 11 1 1100 */ - INVALID, /* 11 1 1101 */ - INVALID, /* 11 1 1110 */ - INVALID, /* 11 1 1111 */ -}; - -#define SWAP(a, b) (t = (a), (a) = (b), (b) = t) - -int -fix_alignment(struct pt_regs *regs) -{ - int instr, nb, flags; -#if defined(CONFIG_4xx) || defined(CONFIG_POWER4) || defined(CONFIG_BOOKE) - int opcode, f1, f2, f3; -#endif - int i, t; - int reg, areg; - int offset, nb0; - unsigned char __user *addr; - unsigned char *rptr; - union { - long l; - float f; - double d; - unsigned char v[8]; - } data; - - CHECK_FULL_REGS(regs); - -#if defined(CONFIG_4xx) || defined(CONFIG_POWER4) || defined(CONFIG_BOOKE) - /* The 4xx-family & Book-E processors have no DSISR register, - * so we emulate it. - * The POWER4 has a DSISR register but doesn't set it on - * an alignment fault. -- paulus - */ - - if (__get_user(instr, (unsigned int __user *) regs->nip)) - return 0; - opcode = OPCD(instr); - reg = RS(instr); - areg = RA(instr); - - if (!IS_XFORM(opcode)) { - f1 = 0; - f2 = (instr & 0x04000000) >> 26; - f3 = (instr & 0x78000000) >> 27; - } else { - f1 = (instr & 0x00000006) >> 1; - f2 = (instr & 0x00000040) >> 6; - f3 = (instr & 0x00000780) >> 7; - } - - instr = ((f1 << 5) | (f2 << 4) | f3); -#else - reg = (regs->dsisr >> 5) & 0x1f; /* source/dest register */ - areg = regs->dsisr & 0x1f; /* register to update */ - instr = (regs->dsisr >> 10) & 0x7f; -#endif - - nb = aligninfo[instr].len; - if (nb == 0) { - long __user *p; - int i; - - if (instr != DCBZ) - return 0; /* too hard or invalid instruction */ - /* - * The dcbz (data cache block zero) instruction - * gives an alignment fault if used on non-cacheable - * memory. We handle the fault mainly for the - * case when we are running with the cache disabled - * for debugging. - */ - p = (long __user *) (regs->dar & -L1_CACHE_BYTES); - if (user_mode(regs) - && !access_ok(VERIFY_WRITE, p, L1_CACHE_BYTES)) - return -EFAULT; - for (i = 0; i < L1_CACHE_BYTES / sizeof(long); ++i) - if (__put_user(0, p+i)) - return -EFAULT; - return 1; - } - - flags = aligninfo[instr].flags; - if ((flags & (LD|ST)) == 0) - return 0; - - /* For the 4xx-family & Book-E processors, the 'dar' field of the - * pt_regs structure is overloaded and is really from the DEAR. - */ - - addr = (unsigned char __user *)regs->dar; - - if (flags & M) { - /* lmw, stmw, lswi/x, stswi/x */ - nb0 = 0; - if (flags & HARD) { - if (flags & SX) { - nb = regs->xer & 127; - if (nb == 0) - return 1; - } else { - if (__get_user(instr, - (unsigned int __user *)regs->nip)) - return 0; - nb = (instr >> 11) & 0x1f; - if (nb == 0) - nb = 32; - } - if (nb + reg * 4 > 128) { - nb0 = nb + reg * 4 - 128; - nb = 128 - reg * 4; - } - } else { - /* lwm, stmw */ - nb = (32 - reg) * 4; - } - - if (!access_ok((flags & ST? VERIFY_WRITE: VERIFY_READ), addr, nb+nb0)) - return -EFAULT; /* bad address */ - - rptr = (unsigned char *) ®s->gpr[reg]; - if (flags & LD) { - for (i = 0; i < nb; ++i) - if (__get_user(rptr[i], addr+i)) - return -EFAULT; - if (nb0 > 0) { - rptr = (unsigned char *) ®s->gpr[0]; - addr += nb; - for (i = 0; i < nb0; ++i) - if (__get_user(rptr[i], addr+i)) - return -EFAULT; - } - for (; (i & 3) != 0; ++i) - rptr[i] = 0; - } else { - for (i = 0; i < nb; ++i) - if (__put_user(rptr[i], addr+i)) - return -EFAULT; - if (nb0 > 0) { - rptr = (unsigned char *) ®s->gpr[0]; - addr += nb; - for (i = 0; i < nb0; ++i) - if (__put_user(rptr[i], addr+i)) - return -EFAULT; - } - } - return 1; - } - - offset = 0; - if (nb < 4) { - /* read/write the least significant bits */ - data.l = 0; - offset = 4 - nb; - } - - /* Verify the address of the operand */ - if (user_mode(regs)) { - if (!access_ok((flags & ST? VERIFY_WRITE: VERIFY_READ), addr, nb)) - return -EFAULT; /* bad address */ - } - - if (flags & F) { - preempt_disable(); - if (regs->msr & MSR_FP) - giveup_fpu(current); - preempt_enable(); - } - - /* If we read the operand, copy it in, else get register values */ - if (flags & LD) { - for (i = 0; i < nb; ++i) - if (__get_user(data.v[offset+i], addr+i)) - return -EFAULT; - } else if (flags & F) { - data.d = current->thread.fpr[reg]; - } else { - data.l = regs->gpr[reg]; - } - - switch (flags & ~U) { - case LD+SE: /* sign extend */ - if (data.v[2] >= 0x80) - data.v[0] = data.v[1] = -1; - break; - - case LD+S: /* byte-swap */ - case ST+S: - if (nb == 2) { - SWAP(data.v[2], data.v[3]); - } else { - SWAP(data.v[0], data.v[3]); - SWAP(data.v[1], data.v[2]); - } - break; - - /* Single-precision FP load and store require conversions... */ - case LD+F+S: -#ifdef CONFIG_PPC_FPU - preempt_disable(); - enable_kernel_fp(); - cvt_fd(&data.f, &data.d, ¤t->thread); - preempt_enable(); -#else - return 0; -#endif - break; - case ST+F+S: -#ifdef CONFIG_PPC_FPU - preempt_disable(); - enable_kernel_fp(); - cvt_df(&data.d, &data.f, ¤t->thread); - preempt_enable(); -#else - return 0; -#endif - break; - } - - if (flags & ST) { - for (i = 0; i < nb; ++i) - if (__put_user(data.v[offset+i], addr+i)) - return -EFAULT; - } else if (flags & F) { - current->thread.fpr[reg] = data.d; - } else { - regs->gpr[reg] = data.l; - } - - if (flags & U) - regs->gpr[areg] = regs->dar; - - return 1; -} diff --git a/arch/ppc64/kernel/Makefile b/arch/ppc64/kernel/Makefile index e876c213f5ce..5f0abdb66e0b 100644 --- a/arch/ppc64/kernel/Makefile +++ b/arch/ppc64/kernel/Makefile @@ -2,6 +2,6 @@ # Makefile for the linux ppc64 kernel. # -obj-y += idle.o align.o +obj-y += idle.o obj-$(CONFIG_PPC_MULTIPLATFORM) += nvram.o diff --git a/include/asm-powerpc/cputable.h b/include/asm-powerpc/cputable.h index 04e2726002cf..d1cfa3f515ea 100644 --- a/include/asm-powerpc/cputable.h +++ b/include/asm-powerpc/cputable.h @@ -90,6 +90,7 @@ extern void do_cpu_ftr_fixups(unsigned long offset); #define CPU_FTR_NEED_COHERENT ASM_CONST(0x0000000000020000) #define CPU_FTR_NO_BTIC ASM_CONST(0x0000000000040000) #define CPU_FTR_BIG_PHYS ASM_CONST(0x0000000000080000) +#define CPU_FTR_NODSISRALIGN ASM_CONST(0x0000000000100000) #ifdef __powerpc64__ /* Add the 64b processor unique features in the top half of the word */ @@ -97,7 +98,6 @@ extern void do_cpu_ftr_fixups(unsigned long offset); #define CPU_FTR_16M_PAGE ASM_CONST(0x0000000200000000) #define CPU_FTR_TLBIEL ASM_CONST(0x0000000400000000) #define CPU_FTR_NOEXECUTE ASM_CONST(0x0000000800000000) -#define CPU_FTR_NODSISRALIGN ASM_CONST(0x0000001000000000) #define CPU_FTR_IABR ASM_CONST(0x0000002000000000) #define CPU_FTR_MMCRA ASM_CONST(0x0000004000000000) #define CPU_FTR_CTRL ASM_CONST(0x0000008000000000) @@ -113,7 +113,6 @@ extern void do_cpu_ftr_fixups(unsigned long offset); #define CPU_FTR_16M_PAGE ASM_CONST(0x0) #define CPU_FTR_TLBIEL ASM_CONST(0x0) #define CPU_FTR_NOEXECUTE ASM_CONST(0x0) -#define CPU_FTR_NODSISRALIGN ASM_CONST(0x0) #define CPU_FTR_IABR ASM_CONST(0x0) #define CPU_FTR_MMCRA ASM_CONST(0x0) #define CPU_FTR_CTRL ASM_CONST(0x0) @@ -273,18 +272,21 @@ enum { CPU_FTRS_POWER3_32 = CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE, CPU_FTRS_POWER4_32 = CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE | - CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE, + CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_NODSISRALIGN, CPU_FTRS_970_32 = CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_ALTIVEC_COMP | - CPU_FTR_MAYBE_CAN_NAP, + CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_NODSISRALIGN, CPU_FTRS_8XX = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB, - CPU_FTRS_40X = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB, - CPU_FTRS_44X = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB, - CPU_FTRS_E200 = CPU_FTR_USE_TB, - CPU_FTRS_E500 = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB, + CPU_FTRS_40X = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | + CPU_FTR_NODSISRALIGN, + CPU_FTRS_44X = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | + CPU_FTR_NODSISRALIGN, + CPU_FTRS_E200 = CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN, + CPU_FTRS_E500 = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | + CPU_FTR_NODSISRALIGN, CPU_FTRS_E500_2 = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | - CPU_FTR_BIG_PHYS, - CPU_FTRS_GENERIC_32 = CPU_FTR_COMMON, + CPU_FTR_BIG_PHYS | CPU_FTR_NODSISRALIGN, + CPU_FTRS_GENERIC_32 = CPU_FTR_COMMON | CPU_FTR_NODSISRALIGN, #ifdef __powerpc64__ CPU_FTRS_POWER3 = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_IABR, From f62859bb6871c5e4a8e591c60befc8caaf54db8c Mon Sep 17 00:00:00 2001 From: Mike Kravetz Date: Mon, 14 Nov 2005 16:12:49 -0800 Subject: [PATCH 13/35] [PATCH] Remove SPAN_OTHER_NODES config definition The config option SPAN_OTHER_NODES was created so that we could make pSeries numa layouts work within the DISCONTIG memory model. Now that DISCONTIG has been replaced by SPARSEMEM, we can eliminate this option. I'll be sending a separate patch to Andrew to remove the arch independent code as pSeries was the only arch that needed this. Signed-off-by: Mike Kravetz Signed-off-by: Paul Mackerras --- arch/powerpc/Kconfig | 13 ------------- arch/powerpc/configs/pseries_defconfig | 1 - 2 files changed, 14 deletions(-) diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 94df74bcc0ee..bb2efdd566a9 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -598,19 +598,6 @@ config ARCH_MEMORY_PROBE def_bool y depends on MEMORY_HOTPLUG -# Some NUMA nodes have memory ranges that span -# other nodes. Even though a pfn is valid and -# between a node's start and end pfns, it may not -# reside on that node. -# -# This is a relatively temporary hack that should -# be able to go away when sparsemem is fully in -# place - -config NODES_SPAN_OTHER_NODES - def_bool y - depends on NEED_MULTIPLE_NODES - config PPC_64K_PAGES bool "64k page size" depends on PPC64 diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig index b4745c918a4a..b589b196eb3f 100644 --- a/arch/powerpc/configs/pseries_defconfig +++ b/arch/powerpc/configs/pseries_defconfig @@ -165,7 +165,6 @@ CONFIG_SPARSEMEM_EXTREME=y # CONFIG_MEMORY_HOTPLUG is not set CONFIG_SPLIT_PTLOCK_CPUS=4096 CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y -CONFIG_NODES_SPAN_OTHER_NODES=y # CONFIG_PPC_64K_PAGES is not set CONFIG_SCHED_SMT=y CONFIG_PROC_DEVICETREE=y From 437a58db57c61385baaa1cb8b7fa590b6a2f1607 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Fri, 18 Nov 2005 15:43:34 +1100 Subject: [PATCH 14/35] powerpc: Move remaining .c files from arch/ppc64 to arch/powerpc This also deletes the now-unused Makefiles under arch/ppc64. Both of the files moved over could use some merging, but for now I have moved them as-is and arranged for them to be used only in 64-bit kernels. For 32-bit kernels we still use arch/ppc/kernel/idle.c and drivers/char/generic_nvram.c as before. Signed-off-by: Paul Mackerras --- arch/powerpc/Makefile | 4 +- arch/powerpc/kernel/Makefile | 5 +- .../idle.c => powerpc/kernel/idle_64.c} | 0 .../nvram.c => powerpc/kernel/nvram_64.c} | 0 arch/ppc64/Makefile | 142 ------------------ arch/ppc64/kernel/Makefile | 7 - 6 files changed, 6 insertions(+), 152 deletions(-) rename arch/{ppc64/kernel/idle.c => powerpc/kernel/idle_64.c} (100%) rename arch/{ppc64/kernel/nvram.c => powerpc/kernel/nvram_64.c} (100%) delete mode 100644 arch/ppc64/Makefile delete mode 100644 arch/ppc64/kernel/Makefile diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 99dbea8c5c50..987036b60c88 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -125,11 +125,11 @@ head-$(CONFIG_PPC64) += arch/powerpc/kernel/entry_64.o head-$(CONFIG_PPC_FPU) += arch/powerpc/kernel/fpu.o core-y += arch/powerpc/kernel/ \ - arch/$(OLDARCH)/kernel/ \ arch/powerpc/mm/ \ arch/powerpc/lib/ \ arch/powerpc/sysdev/ \ arch/powerpc/platforms/ +core-$(CONFIG_PPC32) += arch/ppc/kernel/ core-$(CONFIG_MATH_EMULATION) += arch/ppc/math-emu/ core-$(CONFIG_XMON) += arch/powerpc/xmon/ core-$(CONFIG_APUS) += arch/ppc/amiga/ @@ -165,7 +165,7 @@ define archhelp @echo ' (your) ~/bin/installkernel or' @echo ' (distribution) /sbin/installkernel or' @echo ' install to $$(INSTALL_PATH) and run lilo' - @echo ' *_defconfig - Select default config from arch/$(ARCH)/ppc/configs' + @echo ' *_defconfig - Select default config from arch/$(ARCH)/configs' endef archclean: diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 0e679afb2e20..9ed551b6c172 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -17,7 +17,7 @@ obj-y += vdso32/ obj-$(CONFIG_PPC64) += setup_64.o binfmt_elf32.o sys_ppc32.o \ signal_64.o ptrace32.o systbl.o \ paca.o ioctl32.o cpu_setup_power4.o \ - firmware.o sysfs.o udbg.o + firmware.o sysfs.o udbg.o idle_64.o obj-$(CONFIG_PPC64) += vdso64/ obj-$(CONFIG_ALTIVEC) += vecemu.o vector.o obj-$(CONFIG_POWER4) += idle_power4.o @@ -35,6 +35,7 @@ obj-$(CONFIG_PPC_PSERIES) += udbg_16550.o obj-$(CONFIG_PPC_MAPLE) += udbg_16550.o udbgscc-$(CONFIG_PPC64) := udbg_scc.o obj-$(CONFIG_PPC_PMAC) += $(udbgscc-y) +obj64-$(CONFIG_PPC_MULTIPLATFORM) += nvram_64.o ifeq ($(CONFIG_PPC_MERGE),y) @@ -78,5 +79,7 @@ smpobj-$(CONFIG_SMP) += smp.o endif +obj-$(CONFIG_PPC64) += $(obj64-y) + extra-$(CONFIG_PPC_FPU) += fpu.o extra-$(CONFIG_PPC64) += entry_64.o diff --git a/arch/ppc64/kernel/idle.c b/arch/powerpc/kernel/idle_64.c similarity index 100% rename from arch/ppc64/kernel/idle.c rename to arch/powerpc/kernel/idle_64.c diff --git a/arch/ppc64/kernel/nvram.c b/arch/powerpc/kernel/nvram_64.c similarity index 100% rename from arch/ppc64/kernel/nvram.c rename to arch/powerpc/kernel/nvram_64.c diff --git a/arch/ppc64/Makefile b/arch/ppc64/Makefile deleted file mode 100644 index a55a82d145d4..000000000000 --- a/arch/ppc64/Makefile +++ /dev/null @@ -1,142 +0,0 @@ -# This file is included by the global makefile so that you can add your own -# architecture-specific flags and dependencies. Remember to do have actions -# for "archclean" and "archdep" for cleaning up and making dependencies for -# this architecture -# -# This file is subject to the terms and conditions of the GNU General Public -# License. See the file "COPYING" in the main directory of this archive -# for more details. -# -# Copyright (C) 1994 by Linus Torvalds -# Changes for PPC by Gary Thomas -# Rewritten by Cort Dougan and Paul Mackerras -# Adjusted for PPC64 by Tom Gall -# - -KERNELLOAD := 0xc000000000000000 - -# Set default 32 bits cross compilers for vdso and boot wrapper -CROSS32_COMPILE ?= - -CROSS32CC := $(CROSS32_COMPILE)gcc -CROSS32AS := $(CROSS32_COMPILE)as -CROSS32LD := $(CROSS32_COMPILE)ld -CROSS32OBJCOPY := $(CROSS32_COMPILE)objcopy - -# If we have a biarch compiler, use it for 32 bits cross compile if -# CROSS32_COMPILE wasn't explicitely defined, and add proper explicit -# target type to target compilers - -HAS_BIARCH := $(call cc-option-yn, -m64) -ifeq ($(HAS_BIARCH),y) -ifeq ($(CROSS32_COMPILE),) -CROSS32CC := $(CC) -m32 -CROSS32AS := $(AS) -a32 -CROSS32LD := $(LD) -m elf32ppc -CROSS32OBJCOPY := $(OBJCOPY) -endif -override AS += -a64 -override LD += -m elf64ppc -override CC += -m64 -endif - -export CROSS32CC CROSS32AS CROSS32LD CROSS32OBJCOPY - -new_nm := $(shell if $(NM) --help 2>&1 | grep -- '--synthetic' > /dev/null; then echo y; else echo n; fi) - -ifeq ($(new_nm),y) -NM := $(NM) --synthetic - -endif - -CHECKFLAGS += -m64 -D__powerpc__ -D__powerpc64__ - -LDFLAGS := -m elf64ppc -LDFLAGS_vmlinux := -Bstatic -e $(KERNELLOAD) -Ttext $(KERNELLOAD) -CFLAGS += -msoft-float -pipe -mminimal-toc -mtraceback=none \ - -mcall-aixdesc -# Temporary hack until we have migrated to asm-powerpc -CPPFLAGS += -Iarch/$(ARCH)/include - -GCC_VERSION := $(call cc-version) -GCC_BROKEN_VEC := $(shell if [ $(GCC_VERSION) -lt 0400 ] ; then echo "y"; fi ;) - -ifeq ($(CONFIG_POWER4_ONLY),y) -ifeq ($(CONFIG_ALTIVEC),y) -ifeq ($(GCC_BROKEN_VEC),y) - CFLAGS += $(call cc-option,-mcpu=970) -else - CFLAGS += $(call cc-option,-mcpu=power4) -endif -else - CFLAGS += $(call cc-option,-mcpu=power4) -endif -else - CFLAGS += $(call cc-option,-mtune=power4) -endif - -# No AltiVec instruction when building kernel -CFLAGS += $(call cc-option, -mno-altivec) - -# Enable unit-at-a-time mode when possible. It shrinks the -# kernel considerably. -CFLAGS += $(call cc-option,-funit-at-a-time) - -head-y := arch/ppc64/kernel/head.o -head-y += arch/powerpc/kernel/fpu.o -head-y += arch/powerpc/kernel/entry_64.o - -core-y += arch/ppc64/kernel/ arch/powerpc/kernel/ -core-y += arch/powerpc/mm/ -core-y += arch/powerpc/sysdev/ -core-y += arch/powerpc/platforms/ -core-y += arch/powerpc/lib/ -core-$(CONFIG_XMON) += arch/powerpc/xmon/ -drivers-$(CONFIG_OPROFILE) += arch/powerpc/oprofile/ - -boot := arch/ppc64/boot - -boottargets-$(CONFIG_PPC_PSERIES) += zImage zImage.initrd -boottargets-$(CONFIG_PPC_PMAC) += zImage.vmode zImage.initrd.vmode -boottargets-$(CONFIG_PPC_MAPLE) += zImage zImage.initrd -boottargets-$(CONFIG_PPC_ISERIES) += vmlinux.sminitrd vmlinux.initrd vmlinux.sm -boottargets-$(CONFIG_PPC_BPA) += zImage zImage.initrd -$(boottargets-y): vmlinux - $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ - -bootimage-$(CONFIG_PPC_PSERIES) := $(boot)/zImage -bootimage-$(CONFIG_PPC_PMAC) := vmlinux -bootimage-$(CONFIG_PPC_MAPLE) := $(boot)/zImage -bootimage-$(CONFIG_PPC_BPA) := $(boot)/zImage -bootimage-$(CONFIG_PPC_ISERIES) := vmlinux -BOOTIMAGE := $(bootimage-y) -install: vmlinux - $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(BOOTIMAGE) $@ - -defaultimage-$(CONFIG_PPC_PSERIES) := zImage -defaultimage-$(CONFIG_PPC_PMAC) := zImage.vmode -defaultimage-$(CONFIG_PPC_MAPLE) := zImage -defaultimage-$(CONFIG_PPC_ISERIES) := vmlinux -KBUILD_IMAGE := $(defaultimage-y) -all: $(KBUILD_IMAGE) - -archclean: - $(Q)$(MAKE) $(clean)=$(boot) - # Temporary hack until we have migrated to asm-powerpc - $(Q)rm -rf arch/$(ARCH)/include - - -# Temporary hack until we have migrated to asm-powerpc -include/asm: arch/$(ARCH)/include/asm -arch/$(ARCH)/include/asm: - $(Q)if [ ! -d arch/$(ARCH)/include ]; then mkdir -p arch/$(ARCH)/include; fi - $(Q)ln -fsn $(srctree)/include/asm-powerpc arch/$(ARCH)/include/asm - -define archhelp - echo ' zImage.vmode - Compressed kernel image (arch/$(ARCH)/boot/zImage.vmode)' - echo ' zImage.initrd.vmode - Compressed kernel image with initrd attached,' - echo ' sourced from arch/$(ARCH)/boot/ramdisk.image.gz' - echo ' (arch/$(ARCH)/boot/zImage.initrd.vmode)' - echo ' zImage - zImage for pSeries machines' - echo ' zImage.initrd - zImage with initrd for pSeries machines' -endef diff --git a/arch/ppc64/kernel/Makefile b/arch/ppc64/kernel/Makefile deleted file mode 100644 index 5f0abdb66e0b..000000000000 --- a/arch/ppc64/kernel/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# -# Makefile for the linux ppc64 kernel. -# - -obj-y += idle.o - -obj-$(CONFIG_PPC_MULTIPLATFORM) += nvram.o From 6146eed1e972a7de93ce2e36adc5812de81e879c Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Fri, 18 Nov 2005 15:47:18 +1100 Subject: [PATCH 15/35] powerpc: Fix compile error on pSeries arising from delay.h changes pseries_dedicated_idle() was using __get_tb which used to be defined in asm/delay.h. Change it to use get_tb from asm/time.h, which is in fact exactly the same thing. Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pseries/setup.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index b9d9732b2e06..4a465f067ede 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -504,7 +504,7 @@ static void pseries_dedicated_idle(void) lpaca->lppaca.idle = 1; if (!need_resched()) { - start_snooze = __get_tb() + + start_snooze = get_tb() + *smt_snooze_delay * tb_ticks_per_usec; while (!need_resched() && !cpu_is_offline(cpu)) { @@ -518,7 +518,7 @@ static void pseries_dedicated_idle(void) HMT_very_low(); if (*smt_snooze_delay != 0 && - __get_tb() > start_snooze) { + get_tb() > start_snooze) { HMT_medium(); dedicated_idle_sleep(cpu); } From 49e16b7becd6320bde51aa238c11815708f836d9 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Fri, 18 Nov 2005 15:52:38 +1100 Subject: [PATCH 16/35] powerpc: time-of-day fixes for 32-bit CHRP systems This makes 32-bit CHRP systems use the RTAS time-of-day routines if available. It fixes a bug in the RTAS time-of-day routines where they were storing a 64-bit timebase value in an unsigned long by making those variables u64. Also, the direct-access time-of-day routines had the wrong convention for the month and year in the struct rtc_time. Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/rtas-rtc.c | 6 +++--- arch/powerpc/platforms/chrp/setup.c | 11 ++++++++++- arch/powerpc/platforms/chrp/time.c | 3 +-- 3 files changed, 14 insertions(+), 6 deletions(-) diff --git a/arch/powerpc/kernel/rtas-rtc.c b/arch/powerpc/kernel/rtas-rtc.c index 7b948662704c..635d3b9a8811 100644 --- a/arch/powerpc/kernel/rtas-rtc.c +++ b/arch/powerpc/kernel/rtas-rtc.c @@ -15,7 +15,7 @@ unsigned long __init rtas_get_boot_time(void) { int ret[8]; int error, wait_time; - unsigned long max_wait_tb; + u64 max_wait_tb; max_wait_tb = get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT; do { @@ -45,7 +45,7 @@ void rtas_get_rtc_time(struct rtc_time *rtc_tm) { int ret[8]; int error, wait_time; - unsigned long max_wait_tb; + u64 max_wait_tb; max_wait_tb = get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT; do { @@ -80,7 +80,7 @@ void rtas_get_rtc_time(struct rtc_time *rtc_tm) int rtas_set_rtc_time(struct rtc_time *tm) { int error, wait_time; - unsigned long max_wait_tb; + u64 max_wait_tb; max_wait_tb = get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT; do { diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c index 4099ddab9205..dda5f2c72c25 100644 --- a/arch/powerpc/platforms/chrp/setup.c +++ b/arch/powerpc/platforms/chrp/setup.c @@ -257,6 +257,13 @@ void __init chrp_setup_arch(void) if (rtas_token("display-character") >= 0) ppc_md.progress = rtas_progress; + /* use RTAS time-of-day routines if available */ + if (rtas_token("get-time-of-day") != RTAS_UNKNOWN_SERVICE) { + ppc_md.get_boot_time = rtas_get_boot_time; + ppc_md.get_rtc_time = rtas_get_rtc_time; + ppc_md.set_rtc_time = rtas_set_rtc_time; + } + #ifdef CONFIG_BOOTX_TEXT if (ppc_md.progress == NULL && boot_text_mapped) ppc_md.progress = btext_progress; @@ -505,9 +512,11 @@ void __init chrp_init(void) ppc_md.halt = rtas_halt; ppc_md.time_init = chrp_time_init; + ppc_md.calibrate_decr = chrp_calibrate_decr; + + /* this may get overridden with rtas routines later... */ ppc_md.set_rtc_time = chrp_set_rtc_time; ppc_md.get_rtc_time = chrp_get_rtc_time; - ppc_md.calibrate_decr = chrp_calibrate_decr; #ifdef CONFIG_SMP smp_ops = &chrp_smp_ops; diff --git a/arch/powerpc/platforms/chrp/time.c b/arch/powerpc/platforms/chrp/time.c index 9e53535ddb82..737ee5d9f0aa 100644 --- a/arch/powerpc/platforms/chrp/time.c +++ b/arch/powerpc/platforms/chrp/time.c @@ -87,7 +87,6 @@ int chrp_set_rtc_time(struct rtc_time *tmarg) chrp_cmos_clock_write((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT); - tm.tm_year -= 1900; if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { BIN_TO_BCD(tm.tm_sec); BIN_TO_BCD(tm.tm_min); @@ -156,7 +155,7 @@ void chrp_get_rtc_time(struct rtc_time *tm) BCD_TO_BIN(mon); BCD_TO_BIN(year); } - if ((year += 1900) < 1970) + if (year < 70) year += 100; tm->tm_sec = sec; tm->tm_min = min; From 44aedfe7dedb1ba9f4f9d17f55dec5727f5ff82f Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Fri, 18 Nov 2005 15:54:12 +1100 Subject: [PATCH 17/35] powerpc: Fix a couple of compile warnings for 32-bit compiles Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/chrp/smp.c | 1 + arch/ppc/kernel/pci.c | 1 - 2 files changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/platforms/chrp/smp.c b/arch/powerpc/platforms/chrp/smp.c index bb2315997d45..b616053bc331 100644 --- a/arch/powerpc/platforms/chrp/smp.c +++ b/arch/powerpc/platforms/chrp/smp.c @@ -34,6 +34,7 @@ #include #include #include +#include static void __devinit smp_chrp_kick_cpu(int nr) { diff --git a/arch/ppc/kernel/pci.c b/arch/ppc/kernel/pci.c index 48ed58f995c0..f7fae5f153b2 100644 --- a/arch/ppc/kernel/pci.c +++ b/arch/ppc/kernel/pci.c @@ -45,7 +45,6 @@ static void update_bridge_base(struct pci_bus *bus, int i); static void pcibios_fixup_resources(struct pci_dev* dev); static void fixup_broken_pcnet32(struct pci_dev* dev); static int reparent_resources(struct resource *parent, struct resource *res); -static void fixup_rev1_53c810(struct pci_dev* dev); static void fixup_cpc710_pci64(struct pci_dev* dev); #ifdef CONFIG_PPC_OF static u8* pci_to_OF_bus_map; From 8a5abdf80ecf3ad3fa052878778c7185c5911a53 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Fri, 18 Nov 2005 16:39:08 +1100 Subject: [PATCH 18/35] powerpc: Move defconfig over and remove remaining arch/ppc64 files make defconfig will now use arch/powerpc/configs/ppc64_defconfig if running on a ppc64 system. I need to add an arch/powerpc/configs/ppc_defconfig sometime. Signed-off-by: Paul Mackerras --- arch/powerpc/Makefile | 5 +- .../configs/ppc64_defconfig} | 348 +++-- arch/ppc64/Kconfig.debug | 65 - arch/ppc64/configs/bpa_defconfig | 1024 ------------ arch/ppc64/configs/g5_defconfig | 1392 ----------------- arch/ppc64/configs/iSeries_defconfig | 998 ------------ arch/ppc64/configs/maple_defconfig | 1062 ------------- arch/ppc64/configs/pSeries_defconfig | 1371 ---------------- 8 files changed, 245 insertions(+), 6020 deletions(-) rename arch/{ppc64/defconfig => powerpc/configs/ppc64_defconfig} (86%) delete mode 100644 arch/ppc64/Kconfig.debug delete mode 100644 arch/ppc64/configs/bpa_defconfig delete mode 100644 arch/ppc64/configs/g5_defconfig delete mode 100644 arch/ppc64/configs/iSeries_defconfig delete mode 100644 arch/ppc64/configs/maple_defconfig delete mode 100644 arch/ppc64/configs/pSeries_defconfig diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 987036b60c88..98f67c78d1bd 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -33,6 +33,8 @@ endif export CROSS32CC CROSS32AS CROSS32LD CROSS32OBJCOPY +KBUILD_DEFCONFIG := $(shell uname -m)_defconfig + ifeq ($(CONFIG_PPC64),y) OLDARCH := ppc64 SZ := 64 @@ -111,9 +113,6 @@ cpu-as-$(CONFIG_E200) += -Wa,-me200 AFLAGS += $(cpu-as-y) CFLAGS += $(cpu-as-y) -# Default to the common case. -KBUILD_DEFCONFIG := common_defconfig - head-y := arch/powerpc/kernel/head_32.o head-$(CONFIG_PPC64) := arch/powerpc/kernel/head_64.o head-$(CONFIG_8xx) := arch/powerpc/kernel/head_8xx.o diff --git a/arch/ppc64/defconfig b/arch/powerpc/configs/ppc64_defconfig similarity index 86% rename from arch/ppc64/defconfig rename to arch/powerpc/configs/ppc64_defconfig index e79fd60bc122..b5ba3bbd96fb 100644 --- a/arch/ppc64/defconfig +++ b/arch/powerpc/configs/ppc64_defconfig @@ -1,18 +1,33 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc4 -# Thu Oct 20 08:28:33 2005 +# Linux kernel version: 2.6.15-rc1 +# Fri Nov 18 16:23:24 2005 # +CONFIG_PPC64=y CONFIG_64BIT=y +CONFIG_PPC_MERGE=y CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_ISA_DMA=y +CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y +CONFIG_SYSVIPC_COMPAT=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_FORCE_MAX_ZONEORDER=13 + +# +# Processor support +# +# CONFIG_POWER4_ONLY is not set +CONFIG_POWER3=y +CONFIG_POWER4=y +CONFIG_PPC_FPU=y +CONFIG_ALTIVEC=y +CONFIG_PPC_STD_MMU=y +CONFIG_SMP=y +CONFIG_NR_CPUS=32 # # Code maturity level options @@ -41,7 +56,7 @@ CONFIG_CPUSETS=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set +CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_PRINTK=y CONFIG_BUG=y @@ -67,78 +82,115 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y CONFIG_STOP_MACHINE=y -CONFIG_SYSVIPC_COMPAT=y + +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" # # Platform support # -# CONFIG_PPC_ISERIES is not set CONFIG_PPC_MULTIPLATFORM=y +# CONFIG_PPC_ISERIES is not set +# CONFIG_EMBEDDED6xx is not set +# CONFIG_APUS is not set CONFIG_PPC_PSERIES=y -CONFIG_PPC_BPA=y CONFIG_PPC_PMAC=y +CONFIG_PPC_PMAC64=y CONFIG_PPC_MAPLE=y -CONFIG_PPC=y -CONFIG_PPC64=y +# CONFIG_PPC_CELL is not set CONFIG_PPC_OF=y CONFIG_XICS=y -CONFIG_MPIC=y -CONFIG_BPA_IIC=y -CONFIG_ALTIVEC=y -CONFIG_PPC_SPLPAR=y -CONFIG_KEXEC=y -CONFIG_IBMVIO=y CONFIG_U3_DART=y +CONFIG_MPIC=y +CONFIG_PPC_RTAS=y +CONFIG_RTAS_ERROR_LOGGING=y +CONFIG_RTAS_PROC=y +CONFIG_RTAS_FLASH=m +# CONFIG_MMIO_NVRAM is not set CONFIG_MPIC_BROKEN_U3=y -CONFIG_PPC_PMAC64=y -CONFIG_BOOTX_TEXT=y -# CONFIG_POWER4_ONLY is not set -CONFIG_IOMMU_VMERGE=y -CONFIG_SMP=y -CONFIG_NR_CPUS=32 -CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_ARCH_DISCONTIGMEM_ENABLE=y -CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y -CONFIG_ARCH_SPARSEMEM_ENABLE=y -CONFIG_SELECT_MEMORY_MODEL=y -# CONFIG_FLATMEM_MANUAL is not set -CONFIG_DISCONTIGMEM_MANUAL=y -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_DISCONTIGMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_NEED_MULTIPLE_NODES=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y -CONFIG_NODES_SPAN_OTHER_NODES=y -# CONFIG_NUMA is not set -# CONFIG_SCHED_SMT is not set -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -# CONFIG_PREEMPT_BKL is not set +CONFIG_IBMVIO=y +# CONFIG_PPC_MPC106 is not set +CONFIG_GENERIC_TBSYNC=y +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +# CONFIG_CPU_FREQ_DEBUG is not set +CONFIG_CPU_FREQ_STAT=y +# CONFIG_CPU_FREQ_STAT_DETAILS is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_USERSPACE=y +# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_PMAC64=y +# CONFIG_WANT_EARLY_SERIAL is not set + +# +# Kernel options +# # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_1000 is not set CONFIG_HZ=250 -CONFIG_EEH=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_PPC_RTAS=y -CONFIG_RTAS_PROC=y -CONFIG_RTAS_FLASH=m -CONFIG_SCANLOG=m -CONFIG_LPARCFG=y -CONFIG_SECCOMP=y +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +# CONFIG_PREEMPT_BKL is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m +CONFIG_FORCE_MAX_ZONEORDER=13 +CONFIG_IOMMU_VMERGE=y CONFIG_HOTPLUG_CPU=y +CONFIG_KEXEC=y +CONFIG_IRQ_ALL_CPUS=y +CONFIG_PPC_SPLPAR=y +CONFIG_EEH=y +CONFIG_SCANLOG=m +CONFIG_LPARCFG=y +# CONFIG_NUMA is not set +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +# CONFIG_DISCONTIGMEM_MANUAL is not set +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_HAVE_MEMORY_PRESENT=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_EXTREME=y +# CONFIG_MEMORY_HOTPLUG is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PPC_64K_PAGES is not set +# CONFIG_SCHED_SMT is not set CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y # -# Bus Options +# Bus options # +CONFIG_GENERIC_ISA_DMA=y +CONFIG_PPC_I8259=y +# CONFIG_PPC_INDIRECT_PCI is not set CONFIG_PCI=y CONFIG_PCI_DOMAINS=y # CONFIG_PCI_LEGACY_PROC is not set @@ -158,6 +210,7 @@ CONFIG_HOTPLUG_PCI=m # CONFIG_HOTPLUG_PCI_SHPC is not set CONFIG_HOTPLUG_PCI_RPA=m CONFIG_HOTPLUG_PCI_RPA_DLPAR=m +CONFIG_KERNEL_START=0xc000000000000000 # # Networking @@ -199,6 +252,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# CONFIG_NETFILTER_NETLINK=y CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m @@ -301,6 +358,10 @@ CONFIG_LLC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y @@ -338,13 +399,7 @@ CONFIG_FW_LOADER=y # # Parallel port support # -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -# CONFIG_PARPORT_SERIAL is not set -# CONFIG_PARPORT_PC_FIFO is not set -# CONFIG_PARPORT_PC_SUPERIO is not set -# CONFIG_PARPORT_GSC is not set -# CONFIG_PARPORT_1284 is not set +# CONFIG_PARPORT is not set # # Plug and Play support @@ -354,7 +409,6 @@ CONFIG_PARPORT_PC=m # Block devices # CONFIG_BLK_DEV_FD=y -# CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -370,14 +424,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=65536 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # @@ -407,7 +453,7 @@ CONFIG_IDEPCI_SHARE_IRQ=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y # CONFIG_BLK_DEV_OPTI621 is not set -CONFIG_BLK_DEV_SL82C105=y +# CONFIG_BLK_DEV_SL82C105 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_IDEDMA_FORCED is not set CONFIG_IDEDMA_PCI_AUTO=y @@ -479,6 +525,7 @@ CONFIG_SCSI_ISCSI_ATTRS=m # # SCSI low-level drivers # +# CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -495,10 +542,12 @@ CONFIG_SCSI_SATA_SVW=y # CONFIG_SCSI_ATA_PIIX is not set # CONFIG_SCSI_SATA_MV is not set # CONFIG_SCSI_SATA_NV is not set -# CONFIG_SCSI_SATA_PROMISE is not set +# CONFIG_SCSI_PDC_ADMA is not set # CONFIG_SCSI_SATA_QSTOR is not set +# CONFIG_SCSI_SATA_PROMISE is not set # CONFIG_SCSI_SATA_SX4 is not set # CONFIG_SCSI_SATA_SIL is not set +# CONFIG_SCSI_SATA_SIL24 is not set # CONFIG_SCSI_SATA_SIS is not set # CONFIG_SCSI_SATA_ULI is not set # CONFIG_SCSI_SATA_VIA is not set @@ -512,8 +561,6 @@ CONFIG_SCSI_SATA_SVW=y CONFIG_SCSI_IBMVSCSI=y # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_PPA is not set -# CONFIG_SCSI_IMM is not set CONFIG_SCSI_SYM53C8XX_2=y CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 @@ -608,6 +655,9 @@ CONFIG_IEEE1394_AMDTP=m CONFIG_ADB_PMU=y CONFIG_PMAC_SMU=y CONFIG_THERM_PM72=y +CONFIG_WINDFARM=y +CONFIG_WINDFARM_PM81=y +CONFIG_WINDFARM_PM91=y # # Network device support @@ -664,7 +714,6 @@ CONFIG_E100=y # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_VIA_RHINE is not set -# CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) @@ -684,7 +733,6 @@ CONFIG_E1000=y # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y # CONFIG_BNX2 is not set -# CONFIG_SPIDER_NET is not set # CONFIG_MV643XX_ETH is not set # @@ -714,7 +762,6 @@ CONFIG_IBMOL=y # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set -# CONFIG_PLIP is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set # CONFIG_PPP_FILTER is not set @@ -722,6 +769,7 @@ CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set CONFIG_PPPOE=m # CONFIG_SLIP is not set # CONFIG_NET_FC is not set @@ -784,7 +832,6 @@ CONFIG_INPUT_PCSPKR=m CONFIG_SERIO=y CONFIG_SERIO_I8042=y # CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_PARKBD is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set @@ -817,10 +864,6 @@ CONFIG_SERIAL_JSM=m CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 -CONFIG_PRINTER=m -# CONFIG_LP_CONSOLE is not set -# CONFIG_PPDEV is not set -# CONFIG_TIPAR is not set CONFIG_HVC_CONSOLE=y CONFIG_HVCS=m @@ -834,6 +877,7 @@ CONFIG_HVCS=m # # CONFIG_WATCHDOG is not set # CONFIG_RTC is not set +# CONFIG_GEN_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -851,6 +895,7 @@ CONFIG_MAX_RAW_DEVS=256 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -879,7 +924,6 @@ CONFIG_I2C_AMD8111=y CONFIG_I2C_KEYWEST=y CONFIG_I2C_PMAC_SMU=y # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set @@ -904,6 +948,7 @@ CONFIG_I2C_PMAC_SMU=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -945,7 +990,6 @@ CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SOFT_CURSOR=y CONFIG_FB_MACMODES=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y @@ -960,6 +1004,7 @@ CONFIG_FB_OF=y # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set CONFIG_FB_MATROX=y @@ -983,7 +1028,6 @@ CONFIG_FB_RADEON_I2C=y # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set -# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -992,6 +1036,7 @@ CONFIG_FB_RADEON_I2C=y # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y @@ -1012,7 +1057,94 @@ CONFIG_LCD_DEVICE=y # # Sound # -# CONFIG_SOUND is not set +CONFIG_SOUND=m + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_SEQUENCER=m +CONFIG_SND_SEQ_DUMMY=m +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_GENERIC_DRIVER=y + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# PCI devices +# +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_YMFPCI is not set +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS4000 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_HDA_INTEL is not set + +# +# ALSA PowerMac devices +# +CONFIG_SND_POWERMAC=m +CONFIG_SND_POWERMAC_AUTO_DRC=y + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_USX2Y is not set + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set # # USB support @@ -1046,12 +1178,16 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # USB Device Class drivers # -# CONFIG_USB_BLUETOOTH_TTY is not set +# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set @@ -1106,7 +1242,7 @@ CONFIG_USB_HIDDEV=y # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set -CONFIG_USB_PEGASUS=y +# CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set # CONFIG_USB_MON is not set @@ -1114,7 +1250,6 @@ CONFIG_USB_PEGASUS=y # # USB port drivers # -# CONFIG_USB_USS720 is not set # # USB Serial Converter support @@ -1163,6 +1298,7 @@ CONFIG_INFINIBAND_MTHCA=m # CONFIG_INFINIBAND_MTHCA_DEBUG is not set CONFIG_INFINIBAND_IPOIB=m # CONFIG_INFINIBAND_IPOIB_DEBUG is not set +# CONFIG_INFINIBAND_SRP is not set # # SN Devices @@ -1358,10 +1494,25 @@ CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m # -# Profiling support +# Library routines +# +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m + +# +# Instrumentation Support # CONFIG_PROFILING=y CONFIG_OPROFILE=y +# CONFIG_KPROBES is not set # # Kernel hacking @@ -1378,14 +1529,15 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_FS=y +# CONFIG_DEBUG_VM is not set +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_STACKOVERFLOW=y -# CONFIG_KPROBES is not set CONFIG_DEBUG_STACK_USAGE=y CONFIG_DEBUGGER=y CONFIG_XMON=y # CONFIG_XMON_DEFAULT is not set -# CONFIG_PPCDBG is not set CONFIG_IRQSTACKS=y +CONFIG_BOOTX_TEXT=y # # Security options @@ -1425,17 +1577,3 @@ CONFIG_CRYPTO_TEST=m # # Hardware crypto devices # - -# -# Library routines -# -CONFIG_CRC_CCITT=m -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/ppc64/Kconfig.debug b/arch/ppc64/Kconfig.debug deleted file mode 100644 index b258c9314a1b..000000000000 --- a/arch/ppc64/Kconfig.debug +++ /dev/null @@ -1,65 +0,0 @@ -menu "Kernel hacking" - -source "lib/Kconfig.debug" - -config DEBUG_STACKOVERFLOW - bool "Check for stack overflows" - depends on DEBUG_KERNEL - help - This option will cause messages to be printed if free stack space - drops below a certain limit. - -config KPROBES - bool "Kprobes" - depends on DEBUG_KERNEL - help - Kprobes allows you to trap at almost any kernel address and - execute a callback function. register_kprobe() establishes - a probepoint and specifies the callback. Kprobes is useful - for kernel debugging, non-intrusive instrumentation and testing. - If in doubt, say "N". - -config DEBUG_STACK_USAGE - bool "Stack utilization instrumentation" - depends on DEBUG_KERNEL - help - Enables the display of the minimum amount of free stack which each - task has ever had available in the sysrq-T and sysrq-P debug output. - - This option will slow down process creation somewhat. - -config DEBUGGER - bool "Enable debugger hooks" - depends on DEBUG_KERNEL - help - Include in-kernel hooks for kernel debuggers. Unless you are - intending to debug the kernel, say N here. - -config XMON - bool "Include xmon kernel debugger" - depends on DEBUGGER && !PPC_ISERIES - help - Include in-kernel hooks for the xmon kernel monitor/debugger. - Unless you are intending to debug the kernel, say N here. - Make sure to enable also CONFIG_BOOTX_TEXT on Macs. Otherwise - nothing will appear on the screen (xmon writes directly to the - framebuffer memory). - The cmdline option 'xmon' or 'xmon=early' will drop into xmon very - early during boot. 'xmon=on' will just enable the xmon debugger hooks. - 'xmon=off' will disable the debugger hooks if CONFIG_XMON_DEFAULT is set. - -config XMON_DEFAULT - bool "Enable xmon by default" - depends on XMON - help - xmon is normally disabled unless booted with 'xmon=on'. - Use 'xmon=off' to disable xmon init during runtime. - -config IRQSTACKS - bool "Use separate kernel stacks when processing interrupts" - help - If you say Y here the kernel will use separate kernel stacks - for handling hard and soft interrupts. This can help avoid - overflowing the process kernel stacks. - -endmenu diff --git a/arch/ppc64/configs/bpa_defconfig b/arch/ppc64/configs/bpa_defconfig deleted file mode 100644 index 67ffecbc05cb..000000000000 --- a/arch/ppc64/configs/bpa_defconfig +++ /dev/null @@ -1,1024 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc4 -# Thu Oct 20 08:29:10 2005 -# -CONFIG_64BIT=y -CONFIG_MMU=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_ISA_DMA=y -CONFIG_EARLY_PRINTK=y -CONFIG_COMPAT=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_FORCE_MAX_ZONEORDER=13 - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set -# CONFIG_CPUSETS is not set -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_EMBEDDED is not set -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set -CONFIG_STOP_MACHINE=y -CONFIG_SYSVIPC_COMPAT=y - -# -# Platform support -# -# CONFIG_PPC_ISERIES is not set -CONFIG_PPC_MULTIPLATFORM=y -# CONFIG_PPC_PSERIES is not set -CONFIG_PPC_BPA=y -# CONFIG_PPC_PMAC is not set -# CONFIG_PPC_MAPLE is not set -CONFIG_PPC=y -CONFIG_PPC64=y -CONFIG_PPC_OF=y -CONFIG_BPA_IIC=y -CONFIG_ALTIVEC=y -CONFIG_KEXEC=y -# CONFIG_U3_DART is not set -# CONFIG_BOOTX_TEXT is not set -# CONFIG_POWER4_ONLY is not set -# CONFIG_IOMMU_VMERGE is not set -CONFIG_SMP=y -CONFIG_NR_CPUS=4 -CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_NUMA is not set -CONFIG_SCHED_SMT=y -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -CONFIG_PREEMPT_BKL=y -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_GENERIC_HARDIRQS=y -CONFIG_PPC_RTAS=y -CONFIG_RTAS_PROC=y -CONFIG_RTAS_FLASH=y -CONFIG_SECCOMP=y -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_PROC_DEVICETREE=y -# CONFIG_CMDLINE_BOOL is not set -CONFIG_ISA_DMA_API=y - -# -# Bus Options -# -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_LEGACY_PROC=y -# CONFIG_PCI_DEBUG is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set -CONFIG_NET_IPIP=y -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=y -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set -CONFIG_IPV6=y -# CONFIG_IPV6_PRIVACY is not set -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -CONFIG_INET6_TUNNEL=m -CONFIG_IPV6_TUNNEL=m -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -# CONFIG_NETFILTER_NETLINK is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=y -# CONFIG_IP_NF_CT_ACCT is not set -# CONFIG_IP_NF_CONNTRACK_MARK is not set -# CONFIG_IP_NF_CONNTRACK_EVENTS is not set -CONFIG_IP_NF_CT_PROTO_SCTP=y -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -# CONFIG_IP_NF_NETBIOS_NS is not set -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m -# CONFIG_IP_NF_PPTP is not set -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_REALM=m -CONFIG_IP_NF_MATCH_SCTP=m -# CONFIG_IP_NF_MATCH_DCCP is not set -CONFIG_IP_NF_MATCH_COMMENT=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_MATCH_STRING=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_TARGET_NFQUEUE=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m - -# -# IPv6: Netfilter Configuration (EXPERIMENTAL) -# -# CONFIG_IP6_NF_QUEUE is not set -# CONFIG_IP6_NF_IPTABLES is not set -# CONFIG_IP6_NF_TARGET_NFQUEUE is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set -CONFIG_NET_CLS_ROUTE=y - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -# CONFIG_DEBUG_DRIVER is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -CONFIG_BLK_DEV_NBD=y -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=131072 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -CONFIG_IDEDISK_MULTI_MODE=y -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y -# CONFIG_BLK_DEV_OFFBOARD is not set -CONFIG_BLK_DEV_GENERIC=y -# CONFIG_BLK_DEV_OPTI621 is not set -# CONFIG_BLK_DEV_SL82C105 is not set -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -CONFIG_BLK_DEV_AEC62XX=y -# CONFIG_BLK_DEV_ALI15X3 is not set -# CONFIG_BLK_DEV_AMD74XX is not set -# CONFIG_BLK_DEV_CMD64X is not set -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set -# CONFIG_BLK_DEV_CS5520 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_SC1200 is not set -# CONFIG_BLK_DEV_PIIX is not set -# CONFIG_BLK_DEV_IT821X is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -# CONFIG_BLK_DEV_PDC202XX_NEW is not set -# CONFIG_BLK_DEV_SVWKS is not set -CONFIG_BLK_DEV_SIIMAGE=y -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -# CONFIG_BLK_DEV_VIA82CXXX is not set -# CONFIG_IDE_ARM is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Macintosh device drivers -# - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -# CONFIG_NET_PCI is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -CONFIG_E1000=m -# CONFIG_E1000_NAPI is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -CONFIG_SKGE=m -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -# CONFIG_SPIDER_NET is not set -# CONFIG_MV643XX_ETH is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_PCIPS2 is not set -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -CONFIG_SERIAL_NONSTANDARD=y -# CONFIG_ROCKETPORT is not set -# CONFIG_CYCLADES is not set -# CONFIG_DIGIEPCA is not set -# CONFIG_MOXA_SMARTIO is not set -# CONFIG_ISI is not set -# CONFIG_SYNCLINK is not set -# CONFIG_SYNCLINKMP is not set -# CONFIG_N_HDLC is not set -# CONFIG_SPECIALIX is not set -# CONFIG_SX is not set -# CONFIG_STALDRV is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -CONFIG_WATCHDOG_RTAS=y - -# -# PCI-based Watchdog Cards -# -# CONFIG_PCIPCWATCHDOG is not set -# CONFIG_WDTPCI is not set -# CONFIG_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_HANGCHECK_TIMER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -CONFIG_I2C=y -# CONFIG_I2C_CHARDEV is not set - -# -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=y -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set - -# -# Misc devices -# - -# -# Multimedia Capabilities Port drivers -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -# CONFIG_USB is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# SN Devices -# - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -# CONFIG_ZISOFS is not set -CONFIG_UDF_FS=m -CONFIG_UDF_NLS=y - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -CONFIG_HUGETLBFS=y -CONFIG_HUGETLB_PAGE=y -CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=m -CONFIG_NFSD_V2_ACL=y -CONFIG_NFSD_V3=y -CONFIG_NFSD_V3_ACL=y -# CONFIG_NFSD_V4 is not set -CONFIG_NFSD_TCP=y -CONFIG_LOCKD=m -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=m -CONFIG_NFS_ACL_SUPPORT=m -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=m -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -CONFIG_EFI_PARTITION=y - -# -# Native Language Support -# -CONFIG_NLS=m -CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_LOG_BUF_SHIFT=15 -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_SPINLOCK is not set -CONFIG_DEBUG_SPINLOCK_SLEEP=y -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_INFO is not set -CONFIG_DEBUG_FS=y -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_KPROBES is not set -# CONFIG_DEBUG_STACK_USAGE is not set -CONFIG_DEBUGGER=y -# CONFIG_XMON is not set -# CONFIG_PPCDBG is not set -CONFIG_IRQSTACKS=y - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_HMAC=y -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_MD4 is not set -CONFIG_CRYPTO_MD5=m -CONFIG_CRYPTO_SHA1=m -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set -# CONFIG_CRYPTO_TGR192 is not set -CONFIG_CRYPTO_DES=m -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -CONFIG_CRYPTO_DEFLATE=m -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=m -CONFIG_ZLIB_DEFLATE=m -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/ppc64/configs/g5_defconfig b/arch/ppc64/configs/g5_defconfig deleted file mode 100644 index 6323065fbf2c..000000000000 --- a/arch/ppc64/configs/g5_defconfig +++ /dev/null @@ -1,1392 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc4 -# Thu Oct 20 08:30:23 2005 -# -CONFIG_64BIT=y -CONFIG_MMU=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_ISA_DMA=y -CONFIG_EARLY_PRINTK=y -CONFIG_COMPAT=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_FORCE_MAX_ZONEORDER=13 - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -# CONFIG_CPUSETS is not set -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_EMBEDDED is not set -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_KMOD=y -CONFIG_STOP_MACHINE=y -CONFIG_SYSVIPC_COMPAT=y - -# -# Platform support -# -# CONFIG_PPC_ISERIES is not set -CONFIG_PPC_MULTIPLATFORM=y -# CONFIG_PPC_PSERIES is not set -# CONFIG_PPC_BPA is not set -CONFIG_PPC_PMAC=y -# CONFIG_PPC_MAPLE is not set -CONFIG_PPC=y -CONFIG_PPC64=y -CONFIG_PPC_OF=y -CONFIG_MPIC=y -CONFIG_ALTIVEC=y -CONFIG_KEXEC=y -CONFIG_U3_DART=y -CONFIG_PPC_PMAC64=y -CONFIG_BOOTX_TEXT=y -CONFIG_POWER4_ONLY=y -CONFIG_IOMMU_VMERGE=y -CONFIG_SMP=y -CONFIG_NR_CPUS=2 -CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_NUMA is not set -# CONFIG_SCHED_SMT is not set -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -# CONFIG_PREEMPT_BKL is not set -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_GENERIC_HARDIRQS=y -CONFIG_SECCOMP=y -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -# CONFIG_HOTPLUG_CPU is not set -CONFIG_PROC_DEVICETREE=y -# CONFIG_CMDLINE_BOOL is not set -CONFIG_ISA_DMA_API=y - -# -# Bus Options -# -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_LEGACY_PROC=y -# CONFIG_PCI_DEBUG is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=m -CONFIG_NET_KEY=m -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set -CONFIG_NET_IPIP=y -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_IPCOMP=m -CONFIG_INET_TUNNEL=y -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set -# CONFIG_IPV6 is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -# CONFIG_NETFILTER_NETLINK is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_CT_ACCT=y -CONFIG_IP_NF_CONNTRACK_MARK=y -CONFIG_IP_NF_CONNTRACK_EVENTS=y -CONFIG_IP_NF_CT_PROTO_SCTP=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -# CONFIG_IP_NF_NETBIOS_NS is not set -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m -# CONFIG_IP_NF_PPTP is not set -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_REALM=m -CONFIG_IP_NF_MATCH_SCTP=m -# CONFIG_IP_NF_MATCH_DCCP is not set -CONFIG_IP_NF_MATCH_COMMENT=m -CONFIG_IP_NF_MATCH_CONNMARK=m -CONFIG_IP_NF_MATCH_CONNBYTES=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_MATCH_STRING=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_TARGET_NFQUEUE=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_TARGET_CONNMARK=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -CONFIG_LLC=y -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set -CONFIG_NET_CLS_ROUTE=y - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -# CONFIG_DEBUG_DRIVER is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -CONFIG_BLK_DEV_NBD=m -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_UB is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=65536 -CONFIG_BLK_DEV_INITRD=y -CONFIG_CDROM_PKTCDVD=m -CONFIG_CDROM_PKTCDVD_BUFFERS=8 -# CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECD=y -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_BLK_DEV_IDESCSI is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_IDEPCI=y -# CONFIG_IDEPCI_SHARE_IRQ is not set -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_GENERIC is not set -# CONFIG_BLK_DEV_OPTI621 is not set -# CONFIG_BLK_DEV_SL82C105 is not set -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -# CONFIG_BLK_DEV_AEC62XX is not set -# CONFIG_BLK_DEV_ALI15X3 is not set -# CONFIG_BLK_DEV_AMD74XX is not set -# CONFIG_BLK_DEV_CMD64X is not set -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set -# CONFIG_BLK_DEV_CS5520 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_SC1200 is not set -# CONFIG_BLK_DEV_PIIX is not set -# CONFIG_BLK_DEV_IT821X is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -# CONFIG_BLK_DEV_PDC202XX_NEW is not set -# CONFIG_BLK_DEV_SVWKS is not set -# CONFIG_BLK_DEV_SIIMAGE is not set -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -# CONFIG_BLK_DEV_VIA82CXXX is not set -CONFIG_BLK_DEV_IDE_PMAC=y -CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y -CONFIG_BLK_DEV_IDEDMA_PMAC=y -# CONFIG_BLK_DEV_IDE_PMAC_BLINK is not set -# CONFIG_IDE_ARM is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=y -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=y -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -CONFIG_SCSI_CONSTANTS=y -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transport Attributes -# -CONFIG_SCSI_SPI_ATTRS=y -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -CONFIG_SCSI_SATA=y -# CONFIG_SCSI_SATA_AHCI is not set -CONFIG_SCSI_SATA_SVW=y -# CONFIG_SCSI_ATA_PIIX is not set -# CONFIG_SCSI_SATA_MV is not set -# CONFIG_SCSI_SATA_NV is not set -# CONFIG_SCSI_SATA_PROMISE is not set -# CONFIG_SCSI_SATA_QSTOR is not set -# CONFIG_SCSI_SATA_SX4 is not set -# CONFIG_SCSI_SATA_SIL is not set -# CONFIG_SCSI_SATA_SIS is not set -# CONFIG_SCSI_SATA_ULI is not set -# CONFIG_SCSI_SATA_VIA is not set -# CONFIG_SCSI_SATA_VITESSE is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_FC is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA24XX is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_DEBUG is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=y -CONFIG_MD_LINEAR=y -CONFIG_MD_RAID0=y -CONFIG_MD_RAID1=y -CONFIG_MD_RAID10=m -CONFIG_MD_RAID5=y -CONFIG_MD_RAID6=m -CONFIG_MD_MULTIPATH=m -CONFIG_MD_FAULTY=m -CONFIG_BLK_DEV_DM=y -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_MIRROR=m -CONFIG_DM_ZERO=m -# CONFIG_DM_MULTIPATH is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set - -# -# IEEE 1394 (FireWire) support -# -CONFIG_IEEE1394=y - -# -# Subsystem Options -# -# CONFIG_IEEE1394_VERBOSEDEBUG is not set -CONFIG_IEEE1394_OUI_DB=y -CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y -CONFIG_IEEE1394_CONFIG_ROM_IP1394=y -# CONFIG_IEEE1394_EXPORT_FULL_API is not set - -# -# Device Drivers -# -# CONFIG_IEEE1394_PCILYNX is not set -CONFIG_IEEE1394_OHCI1394=y - -# -# Protocol Drivers -# -CONFIG_IEEE1394_VIDEO1394=m -CONFIG_IEEE1394_SBP2=m -# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set -CONFIG_IEEE1394_ETH1394=m -CONFIG_IEEE1394_DV1394=m -CONFIG_IEEE1394_RAWIO=y -# CONFIG_IEEE1394_CMP is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Macintosh device drivers -# -CONFIG_ADB_PMU=y -CONFIG_PMAC_SMU=y -CONFIG_THERM_PM72=y - -# -# Network device support -# -CONFIG_NETDEVICES=y -CONFIG_DUMMY=m -CONFIG_BONDING=m -# CONFIG_EQUALIZER is not set -CONFIG_TUN=m - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -CONFIG_SUNGEM=y -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -# CONFIG_NET_PCI is not set - -# -# Ethernet (1000 Mbit) -# -CONFIG_ACENIC=y -CONFIG_ACENIC_OMIT_TIGON_I=y -# CONFIG_DL2K is not set -CONFIG_E1000=y -# CONFIG_E1000_NAPI is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SK98LIN is not set -CONFIG_TIGON3=m -# CONFIG_BNX2 is not set -# CONFIG_MV643XX_ETH is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -CONFIG_TR=y -CONFIG_IBMOL=y -# CONFIG_3C359 is not set -# CONFIG_TMS380TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_JOYDEV=m -# CONFIG_INPUT_TSDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -# CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -CONFIG_INPUT_MOUSE=y -# CONFIG_MOUSE_PS2 is not set -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_PCIPS2 is not set -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -# CONFIG_SERIAL_PMACZILOG is not set -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -CONFIG_AGP=m -CONFIG_AGP_UNINORTH=m -# CONFIG_DRM is not set -CONFIG_RAW_DRIVER=y -CONFIG_MAX_RAW_DEVS=256 -# CONFIG_HANGCHECK_TIMER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=y -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_KEYWEST=y -CONFIG_I2C_PMAC_SMU=y -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set - -# -# Misc devices -# - -# -# Multimedia Capabilities Port drivers -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -CONFIG_FB=y -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SOFT_CURSOR=y -CONFIG_FB_MACMODES=y -CONFIG_FB_MODE_HELPERS=y -CONFIG_FB_TILEBLITTING=y -# CONFIG_FB_CIRRUS is not set -# CONFIG_FB_PM2 is not set -# CONFIG_FB_CYBER2000 is not set -CONFIG_FB_OF=y -# CONFIG_FB_CONTROL is not set -# CONFIG_FB_PLATINUM is not set -# CONFIG_FB_VALKYRIE is not set -# CONFIG_FB_CT65550 is not set -# CONFIG_FB_ASILIANT is not set -# CONFIG_FB_IMSTT is not set -# CONFIG_FB_VGA16 is not set -# CONFIG_FB_NVIDIA is not set -CONFIG_FB_RIVA=y -# CONFIG_FB_RIVA_I2C is not set -# CONFIG_FB_RIVA_DEBUG is not set -# CONFIG_FB_MATROX is not set -# CONFIG_FB_RADEON_OLD is not set -CONFIG_FB_RADEON=y -CONFIG_FB_RADEON_I2C=y -# CONFIG_FB_RADEON_DEBUG is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_ATY is not set -# CONFIG_FB_SAVAGE is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_KYRO is not set -# CONFIG_FB_3DFX is not set -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_CYBLA is not set -# CONFIG_FB_TRIDENT is not set -# CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_VIRTUAL is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -# CONFIG_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y - -# -# Logo configuration -# -CONFIG_LOGO=y -CONFIG_LOGO_LINUX_MONO=y -CONFIG_LOGO_LINUX_VGA16=y -CONFIG_LOGO_LINUX_CLUT224=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_BACKLIGHT_CLASS_DEVICE=m -CONFIG_BACKLIGHT_DEVICE=y -CONFIG_LCD_CLASS_DEVICE=m -CONFIG_LCD_DEVICE=y - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_OTG is not set - -# -# USB Host Controller Drivers -# -CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_SPLIT_ISO is not set -# CONFIG_USB_EHCI_ROOT_HUB_TT is not set -# CONFIG_USB_ISP116X_HCD is not set -CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -# CONFIG_USB_UHCI_HCD is not set -# CONFIG_USB_SL811_HCD is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_BLUETOOTH_TTY is not set -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=y - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# -CONFIG_USB_STORAGE=y -# CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_DATAFAB=y -CONFIG_USB_STORAGE_FREECOM=y -CONFIG_USB_STORAGE_ISD200=y -CONFIG_USB_STORAGE_DPCM=y -# CONFIG_USB_STORAGE_USBAT is not set -CONFIG_USB_STORAGE_SDDR09=y -CONFIG_USB_STORAGE_SDDR55=y -CONFIG_USB_STORAGE_JUMPSHOT=y -# CONFIG_USB_STORAGE_ONETOUCH is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=y -CONFIG_USB_HIDINPUT=y -CONFIG_HID_FF=y -CONFIG_HID_PID=y -CONFIG_LOGITECH_FF=y -CONFIG_THRUSTMASTER_FF=y -CONFIG_USB_HIDDEV=y -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_ITMTOUCH is not set -# CONFIG_USB_EGALAX is not set -# CONFIG_USB_YEALINK is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set - -# -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - -# -# USB Network Adapters -# -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_USBNET=m -# CONFIG_USB_NET_AX8817X is not set -CONFIG_USB_NET_CDCETHER=m -# CONFIG_USB_NET_GL620A is not set -# CONFIG_USB_NET_NET1080 is not set -# CONFIG_USB_NET_PLUSB is not set -# CONFIG_USB_NET_RNDIS_HOST is not set -# CONFIG_USB_NET_CDC_SUBSET is not set -# CONFIG_USB_NET_ZAURUS is not set -CONFIG_USB_MON=y - -# -# USB port drivers -# - -# -# USB Serial Converter support -# -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_GENERIC=y -# CONFIG_USB_SERIAL_AIRPRIME is not set -CONFIG_USB_SERIAL_BELKIN=m -CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -# CONFIG_USB_SERIAL_CP2101 is not set -CONFIG_USB_SERIAL_CYPRESS_M8=m -CONFIG_USB_SERIAL_EMPEG=m -CONFIG_USB_SERIAL_FTDI_SIO=m -CONFIG_USB_SERIAL_VISOR=m -CONFIG_USB_SERIAL_IPAQ=m -CONFIG_USB_SERIAL_IR=m -CONFIG_USB_SERIAL_EDGEPORT=m -CONFIG_USB_SERIAL_EDGEPORT_TI=m -CONFIG_USB_SERIAL_GARMIN=m -CONFIG_USB_SERIAL_IPW=m -CONFIG_USB_SERIAL_KEYSPAN_PDA=m -CONFIG_USB_SERIAL_KEYSPAN=m -CONFIG_USB_SERIAL_KEYSPAN_MPR=y -CONFIG_USB_SERIAL_KEYSPAN_USA28=y -CONFIG_USB_SERIAL_KEYSPAN_USA28X=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y -CONFIG_USB_SERIAL_KEYSPAN_USA19=y -CONFIG_USB_SERIAL_KEYSPAN_USA18X=y -CONFIG_USB_SERIAL_KEYSPAN_USA19W=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y -CONFIG_USB_SERIAL_KEYSPAN_USA49W=y -CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y -CONFIG_USB_SERIAL_KLSI=m -CONFIG_USB_SERIAL_KOBIL_SCT=m -CONFIG_USB_SERIAL_MCT_U232=m -CONFIG_USB_SERIAL_PL2303=m -# CONFIG_USB_SERIAL_HP4X is not set -CONFIG_USB_SERIAL_SAFE=m -CONFIG_USB_SERIAL_SAFE_PADDED=y -CONFIG_USB_SERIAL_TI=m -CONFIG_USB_SERIAL_CYBERJACK=m -CONFIG_USB_SERIAL_XIRCOM=m -CONFIG_USB_SERIAL_OMNINET=m -CONFIG_USB_EZUSB=y - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_AUERSWALD is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGETKIT is not set -# CONFIG_USB_PHIDGETSERVO is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_SISUSBVGA is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# SN Devices -# - -# -# File systems -# -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT2_FS_SECURITY=y -CONFIG_EXT2_FS_XIP=y -CONFIG_FS_XIP=y -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_EXT3_FS_SECURITY=y -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -CONFIG_REISERFS_FS_SECURITY=y -# CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y -CONFIG_XFS_FS=m -CONFIG_XFS_EXPORT=y -# CONFIG_XFS_QUOTA is not set -CONFIG_XFS_SECURITY=y -CONFIG_XFS_POSIX_ACL=y -# CONFIG_XFS_RT is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -CONFIG_AUTOFS_FS=m -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_ZISOFS_FS=y -CONFIG_UDF_FS=m -CONFIG_UDF_NLS=y - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -CONFIG_HUGETLBFS=y -CONFIG_HUGETLB_PAGE=y -CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -CONFIG_HFS_FS=m -CONFIG_HFSPLUS_FS=m -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_CRAMFS=y -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=y -CONFIG_NFSD_V2_ACL=y -CONFIG_NFSD_V3=y -CONFIG_NFSD_V3_ACL=y -CONFIG_NFSD_V4=y -CONFIG_NFSD_TCP=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=y -CONFIG_NFS_ACL_SUPPORT=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -CONFIG_SUNRPC_GSS=y -CONFIG_RPCSEC_GSS_KRB5=y -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -CONFIG_CIFS=m -# CONFIG_CIFS_STATS is not set -# CONFIG_CIFS_XATTR is not set -# CONFIG_CIFS_EXPERIMENTAL is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -CONFIG_MAC_PARTITION=y -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=y -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -CONFIG_NLS_CODEPAGE_1250=y -CONFIG_NLS_CODEPAGE_1251=y -CONFIG_NLS_ASCII=y -CONFIG_NLS_ISO8859_1=y -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -CONFIG_NLS_ISO8859_15=y -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -CONFIG_NLS_UTF8=y - -# -# Profiling support -# -CONFIG_PROFILING=y -CONFIG_OPROFILE=y - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_LOG_BUF_SHIFT=17 -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_INFO is not set -CONFIG_DEBUG_FS=y -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_KPROBES is not set -# CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUGGER is not set -# CONFIG_PPCDBG is not set -CONFIG_IRQSTACKS=y - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -# CONFIG_CRYPTO_TGR192 is not set -CONFIG_CRYPTO_DES=y -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -CONFIG_CRYPTO_TEST=m - -# -# Hardware crypto devices -# - -# -# Library routines -# -CONFIG_CRC_CCITT=m -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/ppc64/configs/iSeries_defconfig b/arch/ppc64/configs/iSeries_defconfig deleted file mode 100644 index 62e92c7e9e27..000000000000 --- a/arch/ppc64/configs/iSeries_defconfig +++ /dev/null @@ -1,998 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc4 -# Thu Oct 20 08:30:56 2005 -# -CONFIG_64BIT=y -CONFIG_MMU=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_ISA_DMA=y -CONFIG_EARLY_PRINTK=y -CONFIG_COMPAT=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_FORCE_MAX_ZONEORDER=13 - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_AUDIT=y -CONFIG_AUDITSYSCALL=y -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -# CONFIG_CPUSETS is not set -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_EMBEDDED is not set -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_KMOD=y -CONFIG_STOP_MACHINE=y -CONFIG_SYSVIPC_COMPAT=y - -# -# Platform support -# -CONFIG_PPC_ISERIES=y -# CONFIG_PPC_MULTIPLATFORM is not set -CONFIG_PPC=y -CONFIG_PPC64=y -CONFIG_IBMVIO=y -# CONFIG_POWER4_ONLY is not set -CONFIG_IOMMU_VMERGE=y -CONFIG_SMP=y -CONFIG_NR_CPUS=32 -CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_NUMA is not set -# CONFIG_SCHED_SMT is not set -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -# CONFIG_PREEMPT_BKL is not set -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_GENERIC_HARDIRQS=y -CONFIG_LPARCFG=y -CONFIG_SECCOMP=y -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_ISA_DMA_API=y - -# -# Bus Options -# -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_LEGACY_PROC=y -# CONFIG_PCI_DEBUG is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=m -CONFIG_NET_KEY=m -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set -CONFIG_NET_IPIP=y -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_IPCOMP=m -CONFIG_INET_TUNNEL=y -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set -# CONFIG_IPV6 is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -# CONFIG_NETFILTER_NETLINK is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_CT_ACCT=y -CONFIG_IP_NF_CONNTRACK_MARK=y -CONFIG_IP_NF_CONNTRACK_EVENTS=y -CONFIG_IP_NF_CT_PROTO_SCTP=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -# CONFIG_IP_NF_NETBIOS_NS is not set -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m -# CONFIG_IP_NF_PPTP is not set -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_REALM=m -CONFIG_IP_NF_MATCH_SCTP=m -# CONFIG_IP_NF_MATCH_DCCP is not set -CONFIG_IP_NF_MATCH_COMMENT=m -CONFIG_IP_NF_MATCH_CONNMARK=m -CONFIG_IP_NF_MATCH_CONNBYTES=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_MATCH_STRING=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_TARGET_NFQUEUE=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_TARGET_CONNMARK=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -CONFIG_LLC=y -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set -CONFIG_NET_CLS_ROUTE=y - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m -# CONFIG_DEBUG_DRIVER is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -CONFIG_BLK_DEV_NBD=m -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=65536 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=y -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=y -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -CONFIG_SCSI_CONSTANTS=y -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transport Attributes -# -CONFIG_SCSI_SPI_ATTRS=y -CONFIG_SCSI_FC_ATTRS=y -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -CONFIG_SCSI_IBMVSCSI=m -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_FC is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA24XX is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_DEBUG is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=y -CONFIG_MD_LINEAR=y -CONFIG_MD_RAID0=y -CONFIG_MD_RAID1=y -CONFIG_MD_RAID10=m -CONFIG_MD_RAID5=y -CONFIG_MD_RAID6=m -CONFIG_MD_MULTIPATH=m -CONFIG_MD_FAULTY=m -CONFIG_BLK_DEV_DM=y -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_MIRROR=m -CONFIG_DM_ZERO=m -# CONFIG_DM_MULTIPATH is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Macintosh device drivers -# - -# -# Network device support -# -CONFIG_NETDEVICES=y -CONFIG_DUMMY=m -CONFIG_BONDING=m -# CONFIG_EQUALIZER is not set -CONFIG_TUN=m - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_NET_PCI=y -CONFIG_PCNET32=y -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set -# CONFIG_EEPRO100 is not set -CONFIG_E100=y -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_VIA_RHINE is not set - -# -# Ethernet (1000 Mbit) -# -CONFIG_ACENIC=m -# CONFIG_ACENIC_OMIT_TIGON_I is not set -# CONFIG_DL2K is not set -CONFIG_E1000=m -# CONFIG_E1000_NAPI is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -CONFIG_TR=y -CONFIG_IBMOL=y -# CONFIG_3C359 is not set -# CONFIG_TMS380TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -CONFIG_ISERIES_VETH=y -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set -CONFIG_NETCONSOLE=y -CONFIG_NETPOLL=y -CONFIG_NETPOLL_RX=y -CONFIG_NETPOLL_TRAP=y -CONFIG_NET_POLL_CONTROLLER=y - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=m -CONFIG_SERIAL_ICOM=m -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_AGP is not set -# CONFIG_DRM is not set -CONFIG_RAW_DRIVER=y -CONFIG_MAX_RAW_DEVS=256 -# CONFIG_HANGCHECK_TIMER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set - -# -# Misc devices -# - -# -# Multimedia Capabilities Port drivers -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -# CONFIG_USB is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# SN Devices -# - -# -# File systems -# -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT2_FS_SECURITY=y -CONFIG_EXT2_FS_XIP=y -CONFIG_FS_XIP=y -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_EXT3_FS_SECURITY=y -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -CONFIG_REISERFS_FS_SECURITY=y -CONFIG_JFS_FS=m -CONFIG_JFS_POSIX_ACL=y -CONFIG_JFS_SECURITY=y -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set -CONFIG_FS_POSIX_ACL=y -CONFIG_XFS_FS=m -CONFIG_XFS_EXPORT=y -# CONFIG_XFS_QUOTA is not set -CONFIG_XFS_SECURITY=y -CONFIG_XFS_POSIX_ACL=y -# CONFIG_XFS_RT is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -CONFIG_AUTOFS_FS=m -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_ZISOFS_FS=y -CONFIG_UDF_FS=m -CONFIG_UDF_NLS=y - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_HUGETLBFS is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_CRAMFS=y -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=m -CONFIG_NFSD_V2_ACL=y -CONFIG_NFSD_V3=y -CONFIG_NFSD_V3_ACL=y -CONFIG_NFSD_V4=y -CONFIG_NFSD_TCP=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=m -CONFIG_NFS_ACL_SUPPORT=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -CONFIG_SUNRPC_GSS=y -CONFIG_RPCSEC_GSS_KRB5=y -CONFIG_RPCSEC_GSS_SPKM3=m -# CONFIG_SMB_FS is not set -CONFIG_CIFS=m -# CONFIG_CIFS_STATS is not set -CONFIG_CIFS_XATTR=y -CONFIG_CIFS_POSIX=y -# CONFIG_CIFS_EXPERIMENTAL is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=y -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -CONFIG_NLS_ASCII=y -CONFIG_NLS_ISO8859_1=y -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set - -# -# iSeries device drivers -# -CONFIG_VIOCONS=y -CONFIG_VIODASD=y -CONFIG_VIOCD=m -CONFIG_VIOTAPE=m -CONFIG_VIOPATH=y - -# -# Profiling support -# -CONFIG_PROFILING=y -CONFIG_OPROFILE=y - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_LOG_BUF_SHIFT=17 -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_INFO is not set -CONFIG_DEBUG_FS=y -CONFIG_DEBUG_STACKOVERFLOW=y -# CONFIG_KPROBES is not set -CONFIG_DEBUG_STACK_USAGE=y -# CONFIG_DEBUGGER is not set -# CONFIG_PPCDBG is not set -CONFIG_IRQSTACKS=y - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_DES=y -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -CONFIG_CRYPTO_TEST=m - -# -# Hardware crypto devices -# - -# -# Library routines -# -CONFIG_CRC_CCITT=m -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/ppc64/configs/maple_defconfig b/arch/ppc64/configs/maple_defconfig deleted file mode 100644 index 7b480f3d1406..000000000000 --- a/arch/ppc64/configs/maple_defconfig +++ /dev/null @@ -1,1062 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc4 -# Thu Oct 20 08:31:24 2005 -# -CONFIG_64BIT=y -CONFIG_MMU=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_ISA_DMA=y -CONFIG_EARLY_PRINTK=y -CONFIG_COMPAT=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_FORCE_MAX_ZONEORDER=13 - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -# CONFIG_CPUSETS is not set -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_EMBEDDED is not set -CONFIG_KALLSYMS=y -CONFIG_KALLSYMS_ALL=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_KMOD=y -CONFIG_STOP_MACHINE=y -CONFIG_SYSVIPC_COMPAT=y - -# -# Platform support -# -# CONFIG_PPC_ISERIES is not set -CONFIG_PPC_MULTIPLATFORM=y -# CONFIG_PPC_PSERIES is not set -# CONFIG_PPC_BPA is not set -# CONFIG_PPC_PMAC is not set -CONFIG_PPC_MAPLE=y -CONFIG_PPC=y -CONFIG_PPC64=y -CONFIG_PPC_OF=y -CONFIG_MPIC=y -# CONFIG_ALTIVEC is not set -CONFIG_KEXEC=y -CONFIG_U3_DART=y -CONFIG_MPIC_BROKEN_U3=y -CONFIG_BOOTX_TEXT=y -CONFIG_POWER4_ONLY=y -CONFIG_IOMMU_VMERGE=y -CONFIG_SMP=y -CONFIG_NR_CPUS=2 -CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_NUMA is not set -# CONFIG_SCHED_SMT is not set -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -# CONFIG_PREEMPT_BKL is not set -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_GENERIC_HARDIRQS=y -CONFIG_SECCOMP=y -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_PROC_DEVICETREE=y -# CONFIG_CMDLINE_BOOL is not set -CONFIG_ISA_DMA_API=y - -# -# Bus Options -# -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_LEGACY_PROC=y -# CONFIG_PCI_DEBUG is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set -# CONFIG_DEBUG_DRIVER is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -# CONFIG_BLK_DEV_LOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_UB is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=8192 -# CONFIG_BLK_DEV_INITRD is not set -# CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECD=y -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -CONFIG_IDE_TASK_IOCTL=y - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y -# CONFIG_BLK_DEV_OFFBOARD is not set -CONFIG_BLK_DEV_GENERIC=y -# CONFIG_BLK_DEV_OPTI621 is not set -# CONFIG_BLK_DEV_SL82C105 is not set -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -# CONFIG_BLK_DEV_AEC62XX is not set -# CONFIG_BLK_DEV_ALI15X3 is not set -CONFIG_BLK_DEV_AMD74XX=y -# CONFIG_BLK_DEV_CMD64X is not set -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set -# CONFIG_BLK_DEV_CS5520 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_SC1200 is not set -# CONFIG_BLK_DEV_PIIX is not set -# CONFIG_BLK_DEV_IT821X is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -# CONFIG_BLK_DEV_PDC202XX_NEW is not set -# CONFIG_BLK_DEV_SVWKS is not set -# CONFIG_BLK_DEV_SIIMAGE is not set -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -# CONFIG_BLK_DEV_VIA82CXXX is not set -# CONFIG_IDE_ARM is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Macintosh device drivers -# - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_NET_PCI=y -# CONFIG_PCNET32 is not set -CONFIG_AMD8111_ETH=y -# CONFIG_AMD8111E_NAPI is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set -# CONFIG_EEPRO100 is not set -# CONFIG_E100 is not set -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_VIA_RHINE is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -CONFIG_E1000=y -# CONFIG_E1000_NAPI is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -# CONFIG_MV643XX_ETH is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1600 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_HANGCHECK_TIMER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=y -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -CONFIG_I2C_AMD8111=y -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set - -# -# Misc devices -# - -# -# Multimedia Capabilities Port drivers -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_OTG is not set - -# -# USB Host Controller Drivers -# -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_SPLIT_ISO=y -CONFIG_USB_EHCI_ROOT_HUB_TT=y -# CONFIG_USB_ISP116X_HCD is not set -CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -CONFIG_USB_UHCI_HCD=y -# CONFIG_USB_SL811_HCD is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_BLUETOOTH_TTY is not set -# CONFIG_USB_ACM is not set -# CONFIG_USB_PRINTER is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# -# CONFIG_USB_STORAGE is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=y -CONFIG_USB_HIDINPUT=y -# CONFIG_HID_FF is not set -# CONFIG_USB_HIDDEV is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_ITMTOUCH is not set -# CONFIG_USB_EGALAX is not set -# CONFIG_USB_YEALINK is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set - -# -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -CONFIG_USB_PEGASUS=y -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET is not set -CONFIG_USB_MON=y - -# -# USB port drivers -# - -# -# USB Serial Converter support -# -CONFIG_USB_SERIAL=y -# CONFIG_USB_SERIAL_CONSOLE is not set -CONFIG_USB_SERIAL_GENERIC=y -# CONFIG_USB_SERIAL_AIRPRIME is not set -# CONFIG_USB_SERIAL_BELKIN is not set -# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set -# CONFIG_USB_SERIAL_CP2101 is not set -CONFIG_USB_SERIAL_CYPRESS_M8=m -# CONFIG_USB_SERIAL_EMPEG is not set -# CONFIG_USB_SERIAL_FTDI_SIO is not set -# CONFIG_USB_SERIAL_VISOR is not set -# CONFIG_USB_SERIAL_IPAQ is not set -# CONFIG_USB_SERIAL_IR is not set -# CONFIG_USB_SERIAL_EDGEPORT is not set -# CONFIG_USB_SERIAL_EDGEPORT_TI is not set -CONFIG_USB_SERIAL_GARMIN=m -CONFIG_USB_SERIAL_IPW=m -# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set -CONFIG_USB_SERIAL_KEYSPAN=y -CONFIG_USB_SERIAL_KEYSPAN_MPR=y -CONFIG_USB_SERIAL_KEYSPAN_USA28=y -CONFIG_USB_SERIAL_KEYSPAN_USA28X=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y -CONFIG_USB_SERIAL_KEYSPAN_USA19=y -CONFIG_USB_SERIAL_KEYSPAN_USA18X=y -CONFIG_USB_SERIAL_KEYSPAN_USA19W=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y -CONFIG_USB_SERIAL_KEYSPAN_USA49W=y -CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y -# CONFIG_USB_SERIAL_KLSI is not set -# CONFIG_USB_SERIAL_KOBIL_SCT is not set -# CONFIG_USB_SERIAL_MCT_U232 is not set -# CONFIG_USB_SERIAL_PL2303 is not set -# CONFIG_USB_SERIAL_HP4X is not set -# CONFIG_USB_SERIAL_SAFE is not set -CONFIG_USB_SERIAL_TI=m -# CONFIG_USB_SERIAL_CYBERJACK is not set -# CONFIG_USB_SERIAL_XIRCOM is not set -# CONFIG_USB_SERIAL_OMNINET is not set -CONFIG_USB_EZUSB=y - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_AUERSWALD is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGETKIT is not set -# CONFIG_USB_PHIDGETSERVO is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_SISUSBVGA is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# SN Devices -# - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -CONFIG_EXT2_FS_XIP=y -CONFIG_FS_XIP=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -CONFIG_HUGETLBFS=y -CONFIG_HUGETLB_PAGE=y -CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_CRAMFS=y -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_ACL_SUPPORT=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -CONFIG_SUNRPC_GSS=y -CONFIG_RPCSEC_GSS_KRB5=y -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -CONFIG_MAC_PARTITION=y -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="utf-8" -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -CONFIG_NLS_UTF8=y - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_LOG_BUF_SHIFT=17 -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_SCHEDSTATS is not set -CONFIG_DEBUG_SLAB=y -# CONFIG_DEBUG_SPINLOCK is not set -CONFIG_DEBUG_SPINLOCK_SLEEP=y -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_INFO is not set -CONFIG_DEBUG_FS=y -CONFIG_DEBUG_STACKOVERFLOW=y -# CONFIG_KPROBES is not set -CONFIG_DEBUG_STACK_USAGE=y -CONFIG_DEBUGGER=y -CONFIG_XMON=y -CONFIG_XMON_DEFAULT=y -# CONFIG_PPCDBG is not set -# CONFIG_IRQSTACKS is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -# CONFIG_CRYPTO_HMAC is not set -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_MD4 is not set -CONFIG_CRYPTO_MD5=y -# CONFIG_CRYPTO_SHA1 is not set -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set -# CONFIG_CRYPTO_TGR192 is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# - -# -# Library routines -# -CONFIG_CRC_CCITT=y -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y diff --git a/arch/ppc64/configs/pSeries_defconfig b/arch/ppc64/configs/pSeries_defconfig deleted file mode 100644 index 9f09dff9e11a..000000000000 --- a/arch/ppc64/configs/pSeries_defconfig +++ /dev/null @@ -1,1371 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc4 -# Thu Oct 20 08:32:17 2005 -# -CONFIG_64BIT=y -CONFIG_MMU=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_ISA_DMA=y -CONFIG_EARLY_PRINTK=y -CONFIG_COMPAT=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_FORCE_MAX_ZONEORDER=13 - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_AUDIT=y -CONFIG_AUDITSYSCALL=y -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_CPUSETS=y -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_EMBEDDED is not set -CONFIG_KALLSYMS=y -CONFIG_KALLSYMS_ALL=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_KMOD=y -CONFIG_STOP_MACHINE=y -CONFIG_SYSVIPC_COMPAT=y - -# -# Platform support -# -# CONFIG_PPC_ISERIES is not set -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_PPC_PSERIES=y -# CONFIG_PPC_BPA is not set -# CONFIG_PPC_PMAC is not set -# CONFIG_PPC_MAPLE is not set -CONFIG_PPC=y -CONFIG_PPC64=y -CONFIG_PPC_OF=y -CONFIG_XICS=y -CONFIG_MPIC=y -CONFIG_ALTIVEC=y -CONFIG_PPC_SPLPAR=y -CONFIG_KEXEC=y -CONFIG_IBMVIO=y -# CONFIG_U3_DART is not set -# CONFIG_BOOTX_TEXT is not set -# CONFIG_POWER4_ONLY is not set -CONFIG_IOMMU_VMERGE=y -CONFIG_SMP=y -CONFIG_NR_CPUS=128 -CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_ARCH_DISCONTIGMEM_ENABLE=y -CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y -CONFIG_ARCH_SPARSEMEM_ENABLE=y -CONFIG_SELECT_MEMORY_MODEL=y -# CONFIG_FLATMEM_MANUAL is not set -CONFIG_DISCONTIGMEM_MANUAL=y -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_DISCONTIGMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_NEED_MULTIPLE_NODES=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y -CONFIG_NODES_SPAN_OTHER_NODES=y -CONFIG_NUMA=y -CONFIG_SCHED_SMT=y -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -# CONFIG_PREEMPT_BKL is not set -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_EEH=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_PPC_RTAS=y -CONFIG_RTAS_PROC=y -CONFIG_RTAS_FLASH=m -CONFIG_SCANLOG=m -CONFIG_LPARCFG=y -CONFIG_SECCOMP=y -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_HOTPLUG_CPU=y -CONFIG_PROC_DEVICETREE=y -# CONFIG_CMDLINE_BOOL is not set -CONFIG_ISA_DMA_API=y - -# -# Bus Options -# -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_LEGACY_PROC=y -# CONFIG_PCI_DEBUG is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# -CONFIG_HOTPLUG_PCI=m -# CONFIG_HOTPLUG_PCI_FAKE is not set -# CONFIG_HOTPLUG_PCI_CPCI is not set -# CONFIG_HOTPLUG_PCI_SHPC is not set -CONFIG_HOTPLUG_PCI_RPA=m -CONFIG_HOTPLUG_PCI_RPA_DLPAR=m - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=m -CONFIG_NET_KEY=m -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set -CONFIG_NET_IPIP=y -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_IPCOMP=m -CONFIG_INET_TUNNEL=y -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set -# CONFIG_IPV6 is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -CONFIG_NETFILTER_NETLINK=y -CONFIG_NETFILTER_NETLINK_QUEUE=m -CONFIG_NETFILTER_NETLINK_LOG=m - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_CT_ACCT=y -CONFIG_IP_NF_CONNTRACK_MARK=y -CONFIG_IP_NF_CONNTRACK_EVENTS=y -CONFIG_IP_NF_CONNTRACK_NETLINK=m -CONFIG_IP_NF_CT_PROTO_SCTP=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -# CONFIG_IP_NF_NETBIOS_NS is not set -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m -# CONFIG_IP_NF_PPTP is not set -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_REALM=m -CONFIG_IP_NF_MATCH_SCTP=m -# CONFIG_IP_NF_MATCH_DCCP is not set -CONFIG_IP_NF_MATCH_COMMENT=m -CONFIG_IP_NF_MATCH_CONNMARK=m -CONFIG_IP_NF_MATCH_CONNBYTES=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_MATCH_STRING=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_TARGET_NFQUEUE=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_TARGET_CONNMARK=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -CONFIG_LLC=y -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set -CONFIG_NET_CLS_ROUTE=y - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -# CONFIG_DEBUG_DRIVER is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -# CONFIG_PARPORT_SERIAL is not set -# CONFIG_PARPORT_PC_FIFO is not set -# CONFIG_PARPORT_PC_SUPERIO is not set -# CONFIG_PARPORT_GSC is not set -# CONFIG_PARPORT_1284 is not set - -# -# Plug and Play support -# - -# -# Block devices -# -CONFIG_BLK_DEV_FD=m -# CONFIG_PARIDE is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -CONFIG_BLK_DEV_NBD=m -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_UB is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=65536 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECD=y -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_BLK_DEV_IDESCSI is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y -# CONFIG_BLK_DEV_OFFBOARD is not set -CONFIG_BLK_DEV_GENERIC=y -# CONFIG_BLK_DEV_OPTI621 is not set -CONFIG_BLK_DEV_SL82C105=y -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -# CONFIG_BLK_DEV_AEC62XX is not set -# CONFIG_BLK_DEV_ALI15X3 is not set -CONFIG_BLK_DEV_AMD74XX=y -# CONFIG_BLK_DEV_CMD64X is not set -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set -# CONFIG_BLK_DEV_CS5520 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_SC1200 is not set -# CONFIG_BLK_DEV_PIIX is not set -# CONFIG_BLK_DEV_IT821X is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -# CONFIG_BLK_DEV_PDC202XX_NEW is not set -# CONFIG_BLK_DEV_SVWKS is not set -# CONFIG_BLK_DEV_SIIMAGE is not set -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -# CONFIG_BLK_DEV_VIA82CXXX is not set -# CONFIG_IDE_ARM is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=y -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=y -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -CONFIG_SCSI_CONSTANTS=y -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transport Attributes -# -CONFIG_SCSI_SPI_ATTRS=y -CONFIG_SCSI_FC_ATTRS=y -CONFIG_SCSI_ISCSI_ATTRS=m -# CONFIG_SCSI_SAS_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -CONFIG_SCSI_IBMVSCSI=y -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_PPA is not set -# CONFIG_SCSI_IMM is not set -CONFIG_SCSI_SYM53C8XX_2=y -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set -CONFIG_SCSI_IPR=y -CONFIG_SCSI_IPR_TRACE=y -CONFIG_SCSI_IPR_DUMP=y -# CONFIG_SCSI_QLOGIC_FC is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=y -CONFIG_SCSI_QLA21XX=m -CONFIG_SCSI_QLA22XX=m -CONFIG_SCSI_QLA2300=m -CONFIG_SCSI_QLA2322=m -CONFIG_SCSI_QLA6312=m -CONFIG_SCSI_QLA24XX=m -CONFIG_SCSI_LPFC=m -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_DEBUG is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=y -CONFIG_MD_LINEAR=y -CONFIG_MD_RAID0=y -CONFIG_MD_RAID1=y -CONFIG_MD_RAID10=m -CONFIG_MD_RAID5=y -CONFIG_MD_RAID6=m -CONFIG_MD_MULTIPATH=m -CONFIG_MD_FAULTY=m -CONFIG_BLK_DEV_DM=y -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_MIRROR=m -CONFIG_DM_ZERO=m -CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Macintosh device drivers -# - -# -# Network device support -# -CONFIG_NETDEVICES=y -CONFIG_DUMMY=m -CONFIG_BONDING=m -# CONFIG_EQUALIZER is not set -CONFIG_TUN=m - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -CONFIG_NET_VENDOR_3COM=y -CONFIG_VORTEX=y -# CONFIG_TYPHOON is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_IBMVETH=y -CONFIG_NET_PCI=y -CONFIG_PCNET32=y -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set -# CONFIG_EEPRO100 is not set -CONFIG_E100=y -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_VIA_RHINE is not set -# CONFIG_NET_POCKET is not set - -# -# Ethernet (1000 Mbit) -# -CONFIG_ACENIC=y -CONFIG_ACENIC_OMIT_TIGON_I=y -# CONFIG_DL2K is not set -CONFIG_E1000=y -# CONFIG_E1000_NAPI is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set -CONFIG_TIGON3=y -# CONFIG_BNX2 is not set -# CONFIG_MV643XX_ETH is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -CONFIG_IXGB=m -# CONFIG_IXGB_NAPI is not set -CONFIG_S2IO=m -# CONFIG_S2IO_NAPI is not set -# CONFIG_2BUFF_MODE is not set - -# -# Token Ring devices -# -CONFIG_TR=y -CONFIG_IBMOL=y -# CONFIG_3C359 is not set -# CONFIG_TMS380TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PLIP is not set -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set -CONFIG_NETCONSOLE=y -CONFIG_NETPOLL=y -CONFIG_NETPOLL_RX=y -CONFIG_NETPOLL_TRAP=y -CONFIG_NET_POLL_CONTROLLER=y - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=y -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -CONFIG_INPUT_MISC=y -CONFIG_INPUT_PCSPKR=m -# CONFIG_INPUT_UINPUT is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_PARKBD is not set -# CONFIG_SERIO_PCIPS2 is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_SERIAL_ICOM=m -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_PRINTER is not set -# CONFIG_PPDEV is not set -# CONFIG_TIPAR is not set -CONFIG_HVC_CONSOLE=y -CONFIG_HVCS=m - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_AGP is not set -# CONFIG_DRM is not set -CONFIG_RAW_DRIVER=y -CONFIG_MAX_RAW_DEVS=1024 -# CONFIG_HANGCHECK_TIMER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -CONFIG_I2C=y -# CONFIG_I2C_CHARDEV is not set - -# -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=y -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set - -# -# Misc devices -# - -# -# Multimedia Capabilities Port drivers -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -CONFIG_FB=y -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SOFT_CURSOR=y -CONFIG_FB_MACMODES=y -CONFIG_FB_MODE_HELPERS=y -CONFIG_FB_TILEBLITTING=y -# CONFIG_FB_CIRRUS is not set -# CONFIG_FB_PM2 is not set -# CONFIG_FB_CYBER2000 is not set -CONFIG_FB_OF=y -# CONFIG_FB_CT65550 is not set -# CONFIG_FB_ASILIANT is not set -# CONFIG_FB_IMSTT is not set -# CONFIG_FB_VGA16 is not set -# CONFIG_FB_NVIDIA is not set -# CONFIG_FB_RIVA is not set -CONFIG_FB_MATROX=y -CONFIG_FB_MATROX_MILLENIUM=y -CONFIG_FB_MATROX_MYSTIQUE=y -CONFIG_FB_MATROX_G=y -# CONFIG_FB_MATROX_I2C is not set -CONFIG_FB_MATROX_MULTIHEAD=y -# CONFIG_FB_RADEON_OLD is not set -CONFIG_FB_RADEON=y -CONFIG_FB_RADEON_I2C=y -# CONFIG_FB_RADEON_DEBUG is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_ATY is not set -# CONFIG_FB_SAVAGE is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_KYRO is not set -# CONFIG_FB_3DFX is not set -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_CYBLA is not set -# CONFIG_FB_TRIDENT is not set -# CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_VIRTUAL is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -# CONFIG_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y - -# -# Logo configuration -# -CONFIG_LOGO=y -CONFIG_LOGO_LINUX_MONO=y -CONFIG_LOGO_LINUX_VGA16=y -CONFIG_LOGO_LINUX_CLUT224=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_BACKLIGHT_CLASS_DEVICE=m -CONFIG_BACKLIGHT_DEVICE=y -CONFIG_LCD_CLASS_DEVICE=m -CONFIG_LCD_DEVICE=y - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_OTG is not set - -# -# USB Host Controller Drivers -# -CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_SPLIT_ISO is not set -# CONFIG_USB_EHCI_ROOT_HUB_TT is not set -# CONFIG_USB_ISP116X_HCD is not set -CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -# CONFIG_USB_UHCI_HCD is not set -# CONFIG_USB_SL811_HCD is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_BLUETOOTH_TTY is not set -# CONFIG_USB_ACM is not set -# CONFIG_USB_PRINTER is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# -CONFIG_USB_STORAGE=y -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=y -CONFIG_USB_HIDINPUT=y -# CONFIG_HID_FF is not set -CONFIG_USB_HIDDEV=y -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_ITMTOUCH is not set -# CONFIG_USB_EGALAX is not set -# CONFIG_USB_YEALINK is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set - -# -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET is not set -CONFIG_USB_MON=y - -# -# USB port drivers -# -# CONFIG_USB_USS720 is not set - -# -# USB Serial Converter support -# -# CONFIG_USB_SERIAL is not set - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_AUERSWALD is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGETKIT is not set -# CONFIG_USB_PHIDGETSERVO is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_SISUSBVGA is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# InfiniBand support -# -CONFIG_INFINIBAND=m -# CONFIG_INFINIBAND_USER_MAD is not set -# CONFIG_INFINIBAND_USER_ACCESS is not set -CONFIG_INFINIBAND_MTHCA=m -# CONFIG_INFINIBAND_MTHCA_DEBUG is not set -CONFIG_INFINIBAND_IPOIB=m -# CONFIG_INFINIBAND_IPOIB_DEBUG is not set - -# -# SN Devices -# - -# -# File systems -# -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT2_FS_SECURITY=y -CONFIG_EXT2_FS_XIP=y -CONFIG_FS_XIP=y -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_EXT3_FS_SECURITY=y -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -CONFIG_REISERFS_FS_SECURITY=y -CONFIG_JFS_FS=m -CONFIG_JFS_POSIX_ACL=y -CONFIG_JFS_SECURITY=y -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set -CONFIG_FS_POSIX_ACL=y -CONFIG_XFS_FS=m -CONFIG_XFS_EXPORT=y -# CONFIG_XFS_QUOTA is not set -CONFIG_XFS_SECURITY=y -CONFIG_XFS_POSIX_ACL=y -# CONFIG_XFS_RT is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -CONFIG_AUTOFS_FS=m -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_ZISOFS_FS=y -CONFIG_UDF_FS=m -CONFIG_UDF_NLS=y - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -CONFIG_HUGETLBFS=y -CONFIG_HUGETLB_PAGE=y -CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_CRAMFS=y -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=y -CONFIG_NFSD_V2_ACL=y -CONFIG_NFSD_V3=y -CONFIG_NFSD_V3_ACL=y -CONFIG_NFSD_V4=y -CONFIG_NFSD_TCP=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=y -CONFIG_NFS_ACL_SUPPORT=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -CONFIG_SUNRPC_GSS=y -CONFIG_RPCSEC_GSS_KRB5=y -CONFIG_RPCSEC_GSS_SPKM3=m -# CONFIG_SMB_FS is not set -CONFIG_CIFS=m -# CONFIG_CIFS_STATS is not set -CONFIG_CIFS_XATTR=y -CONFIG_CIFS_POSIX=y -# CONFIG_CIFS_EXPERIMENTAL is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=y -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -CONFIG_NLS_ASCII=y -CONFIG_NLS_ISO8859_1=y -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set - -# -# Profiling support -# -CONFIG_PROFILING=y -CONFIG_OPROFILE=y - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_LOG_BUF_SHIFT=17 -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_INFO is not set -CONFIG_DEBUG_FS=y -CONFIG_DEBUG_STACKOVERFLOW=y -# CONFIG_KPROBES is not set -CONFIG_DEBUG_STACK_USAGE=y -CONFIG_DEBUGGER=y -CONFIG_XMON=y -CONFIG_XMON_DEFAULT=y -# CONFIG_PPCDBG is not set -CONFIG_IRQSTACKS=y - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_DES=y -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -CONFIG_CRYPTO_TEST=m - -# -# Hardware crypto devices -# - -# -# Library routines -# -CONFIG_CRC_CCITT=m -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m From f365cfd0d8b6d8fb3583d23d48f54efa88ee8563 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Fri, 18 Nov 2005 16:41:49 +1100 Subject: [PATCH 19/35] offb: Fix compile error on ppc32 systems The code Ben H added needs for things like pci_dev, etc. Signed-off-by: Paul Mackerras --- drivers/video/offb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/video/offb.c b/drivers/video/offb.c index fe8ba364b3e8..00d87f5bb7be 100644 --- a/drivers/video/offb.c +++ b/drivers/video/offb.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include From 2203d6ed448ff3b777ee6bb614a53e686b483e5b Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 18 Nov 2005 07:29:51 -0800 Subject: [PATCH 20/35] Fix ACPI processor power block initialization Properly clear the memory, and set "pr->flags.power" only if a C2 or deeper state is valid (to make the code match both the comment and previous behaviour). This fixes a boot-time lockup reported by Maneesh Soni when using "maxcpus=1". Acked-by: Maneesh Soni Signed-off-by: Linus Torvalds --- drivers/acpi/processor_idle.c | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-) diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 573b6a97bb1f..70d8a6ec0920 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -514,8 +514,6 @@ static int acpi_processor_set_power_policy(struct acpi_processor *pr) static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr) { - int i; - ACPI_FUNCTION_TRACE("acpi_processor_get_power_info_fadt"); if (!pr) @@ -524,8 +522,7 @@ static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr) if (!pr->pblk) return_VALUE(-ENODEV); - for (i = 0; i < ACPI_PROCESSOR_MAX_POWER; i++) - memset(pr->power.states, 0, sizeof(struct acpi_processor_cx)); + memset(pr->power.states, 0, sizeof(pr->power.states)); /* if info is obtained from pblk/fadt, type equals state */ pr->power.states[ACPI_STATE_C1].type = ACPI_STATE_C1; @@ -555,13 +552,9 @@ static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr) static int acpi_processor_get_power_info_default_c1(struct acpi_processor *pr) { - int i; - ACPI_FUNCTION_TRACE("acpi_processor_get_power_info_default_c1"); - for (i = 0; i < ACPI_PROCESSOR_MAX_POWER; i++) - memset(&(pr->power.states[i]), 0, - sizeof(struct acpi_processor_cx)); + memset(pr->power.states, 0, sizeof(pr->power.states)); /* if info is obtained from pblk/fadt, type equals state */ pr->power.states[ACPI_STATE_C1].type = ACPI_STATE_C1; @@ -873,7 +866,8 @@ static int acpi_processor_get_power_info(struct acpi_processor *pr) for (i = 1; i < ACPI_PROCESSOR_MAX_POWER; i++) { if (pr->power.states[i].valid) { pr->power.count = i; - pr->flags.power = 1; + if (pr->power.states[i].type >= ACPI_STATE_C2) + pr->flags.power = 1; } } From 2463ade2cb78224302998ee3c7dc7d53da88d258 Mon Sep 17 00:00:00 2001 From: Andrey Volkov Date: Fri, 18 Nov 2005 01:10:48 -0800 Subject: [PATCH 21/35] [PATCH] Fix copy-paste bug in ohci-ppc-soc.c Fix copy-paste bug in ohci-ppc-soc.c(ohci_hcd_ppc_soc_drv_remove) Signed-off-by: Andrey Volkov Cc: Russell King Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/usb/host/ohci-ppc-soc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/host/ohci-ppc-soc.c b/drivers/usb/host/ohci-ppc-soc.c index 18755766e406..2ec6a78bd65e 100644 --- a/drivers/usb/host/ohci-ppc-soc.c +++ b/drivers/usb/host/ohci-ppc-soc.c @@ -185,7 +185,7 @@ static int ohci_hcd_ppc_soc_drv_probe(struct platform_device *pdev) static int ohci_hcd_ppc_soc_drv_remove(struct platform_device *pdev) { - struct usb_hcd *hcd = platform_get_drvdata(dev); + struct usb_hcd *hcd = platform_get_drvdata(pdev); usb_hcd_ppc_soc_remove(hcd, pdev); return 0; From 996417d2c4eb583e94553e4ede58974e0da1c38e Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Fri, 18 Nov 2005 01:10:50 -0800 Subject: [PATCH 22/35] [PATCH] add success/failure indication to RCU torture test One issue with the RCU torture test is that the current error flagging can be lost in dmesg. This patch adds a "SUCCESS"/"FAILURE" string to the line that flags the end of the test, where it can easily be seen with "dmesg | tail" at the end of the test. Also adds tests of architecture-specific memory barriers -- or, more likely, of the RCU torture test itself. Cc: Signed-off-by: "Paul E. McKenney" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/rcutorture.c | 30 ++++++++++++++++++++++++------ 1 file changed, 24 insertions(+), 6 deletions(-) diff --git a/kernel/rcutorture.c b/kernel/rcutorture.c index eb6719c50b4e..88c28d476550 100644 --- a/kernel/rcutorture.c +++ b/kernel/rcutorture.c @@ -80,6 +80,7 @@ struct rcu_torture { struct rcu_head rtort_rcu; int rtort_pipe_count; struct list_head rtort_free; + int rtort_mbtest; }; static int fullstop = 0; /* stop generating callbacks at test end. */ @@ -96,6 +97,8 @@ static atomic_t rcu_torture_wcount[RCU_TORTURE_PIPE_LEN + 1]; atomic_t n_rcu_torture_alloc; atomic_t n_rcu_torture_alloc_fail; atomic_t n_rcu_torture_free; +atomic_t n_rcu_torture_mberror; +atomic_t n_rcu_torture_error; /* * Allocate an element from the rcu_tortures pool. @@ -145,9 +148,10 @@ rcu_torture_cb(struct rcu_head *p) if (i > RCU_TORTURE_PIPE_LEN) i = RCU_TORTURE_PIPE_LEN; atomic_inc(&rcu_torture_wcount[i]); - if (++rp->rtort_pipe_count >= RCU_TORTURE_PIPE_LEN) + if (++rp->rtort_pipe_count >= RCU_TORTURE_PIPE_LEN) { + rp->rtort_mbtest = 0; rcu_torture_free(rp); - else + } else call_rcu(p, rcu_torture_cb); } @@ -206,6 +210,7 @@ rcu_torture_writer(void *arg) rp->rtort_pipe_count = 0; udelay(rcu_random(&rand) & 0x3ff); old_rp = rcu_torture_current; + rp->rtort_mbtest = 1; rcu_assign_pointer(rcu_torture_current, rp); smp_wmb(); if (old_rp != NULL) { @@ -252,6 +257,8 @@ rcu_torture_reader(void *arg) schedule_timeout_interruptible(HZ); continue; } + if (p->rtort_mbtest == 0) + atomic_inc(&n_rcu_torture_mberror); udelay(rcu_random(&rand) & 0x7f); preempt_disable(); pipe_count = p->rtort_pipe_count; @@ -300,16 +307,22 @@ rcu_torture_printk(char *page) } cnt += sprintf(&page[cnt], "rcutorture: "); cnt += sprintf(&page[cnt], - "rtc: %p ver: %ld tfle: %d rta: %d rtaf: %d rtf: %d", + "rtc: %p ver: %ld tfle: %d rta: %d rtaf: %d rtf: %d " + "rtmbe: %d", rcu_torture_current, rcu_torture_current_version, list_empty(&rcu_torture_freelist), atomic_read(&n_rcu_torture_alloc), atomic_read(&n_rcu_torture_alloc_fail), - atomic_read(&n_rcu_torture_free)); + atomic_read(&n_rcu_torture_free), + atomic_read(&n_rcu_torture_mberror)); + if (atomic_read(&n_rcu_torture_mberror) != 0) + cnt += sprintf(&page[cnt], " !!!"); cnt += sprintf(&page[cnt], "\nrcutorture: "); - if (i > 1) + if (i > 1) { cnt += sprintf(&page[cnt], "!!! "); + atomic_inc(&n_rcu_torture_error); + } cnt += sprintf(&page[cnt], "Reader Pipe: "); for (i = 0; i < RCU_TORTURE_PIPE_LEN + 1; i++) cnt += sprintf(&page[cnt], " %ld", pipesummary[i]); @@ -400,7 +413,9 @@ rcu_torture_cleanup(void) for (i = 0; i < RCU_TORTURE_PIPE_LEN; i++) synchronize_rcu(); rcu_torture_stats_print(); /* -After- the stats thread is stopped! */ - PRINTK_STRING("--- End of test"); + printk(KERN_ALERT TORTURE_FLAG + "--- End of test: %s\n", + atomic_read(&n_rcu_torture_error) == 0 ? "SUCCESS" : "FAILURE"); } static int @@ -425,6 +440,7 @@ rcu_torture_init(void) INIT_LIST_HEAD(&rcu_torture_freelist); for (i = 0; i < sizeof(rcu_tortures) / sizeof(rcu_tortures[0]); i++) { + rcu_tortures[i].rtort_mbtest = 0; list_add_tail(&rcu_tortures[i].rtort_free, &rcu_torture_freelist); } @@ -436,6 +452,8 @@ rcu_torture_init(void) atomic_set(&n_rcu_torture_alloc, 0); atomic_set(&n_rcu_torture_alloc_fail, 0); atomic_set(&n_rcu_torture_free, 0); + atomic_set(&n_rcu_torture_mberror, 0); + atomic_set(&n_rcu_torture_error, 0); for (i = 0; i < RCU_TORTURE_PIPE_LEN + 1; i++) atomic_set(&rcu_torture_wcount[i], 0); for_each_cpu(cpu) { From 58bb01a9cd72eebf60d00c57b948a76aa7b85727 Mon Sep 17 00:00:00 2001 From: Hans Reiser Date: Fri, 18 Nov 2005 01:10:53 -0800 Subject: [PATCH 23/35] [PATCH] re-export clear_page_dirty_for_io() 2.6.14 has this exported, and reiser4 (at least) uses it. Put things back the way they were. Signed-off-by: Vladimir V. Saveliev Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/page-writeback.c | 1 + 1 file changed, 1 insertion(+) diff --git a/mm/page-writeback.c b/mm/page-writeback.c index 74138c9a22b9..0166ea15c9ee 100644 --- a/mm/page-writeback.c +++ b/mm/page-writeback.c @@ -750,6 +750,7 @@ int clear_page_dirty_for_io(struct page *page) } return TestClearPageDirty(page); } +EXPORT_SYMBOL(clear_page_dirty_for_io); int test_clear_page_writeback(struct page *page) { From 44f080c46e84090daf81b4d142359f8e38d7c5ee Mon Sep 17 00:00:00 2001 From: Matt Domsch Date: Fri, 18 Nov 2005 01:10:54 -0800 Subject: [PATCH 24/35] [PATCH] ipmi: missing NULL test for kthread On IPMI systems with BT interfaces, we don't start the kernel thread, so smi_info->thread is NULL. Test for NULL when stopping the thread, because kthread_stop() doesn't, and an oops ensues otherwise. Signed-off-by: Matt Domsch Acked-by: Corey Minyard Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/ipmi/ipmi_si_intf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index ea89dca3dbb5..01a1f6badb53 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -2203,7 +2203,7 @@ static void setup_xaction_handlers(struct smi_info *smi_info) static inline void wait_for_timer_and_thread(struct smi_info *smi_info) { - if (smi_info->thread != ERR_PTR(-ENOMEM)) + if (smi_info->thread != NULL && smi_info->thread != ERR_PTR(-ENOMEM)) kthread_stop(smi_info->thread); del_timer_sync(&smi_info->si_timer); } From 966cc04b4d9d3d7a49e744888628acc36ebec5d4 Mon Sep 17 00:00:00 2001 From: Vitaly Bordug Date: Fri, 18 Nov 2005 01:10:55 -0800 Subject: [PATCH 25/35] [PATCH] ppc32: add missing define for fs_enet Ethernet driver This adds the FCC_PSMR_RMII defenition, which is used in fs_enet to enable RMII mode. Signed-off-by: Vitaly Bordug Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-ppc/cpm2.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/asm-ppc/cpm2.h b/include/asm-ppc/cpm2.h index 43d2ebbc7748..b638b87cebe3 100644 --- a/include/asm-ppc/cpm2.h +++ b/include/asm-ppc/cpm2.h @@ -1091,5 +1091,7 @@ typedef struct im_idma { #define CPM_IMMR_OFFSET 0x101a8 #endif +#define FCC_PSMR_RMII ((uint)0x00020000) /* Use RMII interface */ + #endif /* __CPM2__ */ #endif /* __KERNEL__ */ From ba3961152e7016237e15e3dfc18f08c1853d156b Mon Sep 17 00:00:00 2001 From: Kylene Jo Hall Date: Fri, 18 Nov 2005 01:10:57 -0800 Subject: [PATCH 26/35] [PATCH] tpm: use flush_scheduled_work() Add the necessary flush_schedule_work calls when canceling the timer. Signed-off-by: Kylene Hall Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/tpm/tpm.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c index 0b283d246730..a9be0e8eaea5 100644 --- a/drivers/char/tpm/tpm.c +++ b/drivers/char/tpm/tpm.c @@ -377,6 +377,7 @@ int tpm_release(struct inode *inode, struct file *file) file->private_data = NULL; chip->num_opens--; del_singleshot_timer_sync(&chip->user_read_timer); + flush_scheduled_work(); atomic_set(&chip->data_pending, 0); put_device(chip->dev); kfree(chip->data_buffer); @@ -428,6 +429,7 @@ ssize_t tpm_read(struct file * file, char __user *buf, int ret_size; del_singleshot_timer_sync(&chip->user_read_timer); + flush_scheduled_work(); ret_size = atomic_read(&chip->data_pending); atomic_set(&chip->data_pending, 0); if (ret_size > 0) { /* relay data */ From 90612b308f2a2cc8aa08fbaf6f7184f5b7b5a855 Mon Sep 17 00:00:00 2001 From: Kylene Jo Hall Date: Fri, 18 Nov 2005 01:10:58 -0800 Subject: [PATCH 27/35] [PATCH] tpm: use ioread8 and iowrite8 Use ioread8 and iowrite8 as suggested. Signed-off-by: Kylene Hall Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/tpm/tpm_atmel.c | 47 ++++++++++++++++++++---------------- drivers/char/tpm/tpm_atmel.h | 22 +++++++++-------- 2 files changed, 38 insertions(+), 31 deletions(-) diff --git a/drivers/char/tpm/tpm_atmel.c b/drivers/char/tpm/tpm_atmel.c index deb4b5c80914..ff3654964fe3 100644 --- a/drivers/char/tpm/tpm_atmel.c +++ b/drivers/char/tpm/tpm_atmel.c @@ -47,13 +47,12 @@ static int tpm_atml_recv(struct tpm_chip *chip, u8 *buf, size_t count) return -EIO; for (i = 0; i < 6; i++) { - status = atmel_getb(chip, 1); + status = ioread8(chip->vendor->iobase + 1); if ((status & ATML_STATUS_DATA_AVAIL) == 0) { - dev_err(chip->dev, - "error reading header\n"); + dev_err(chip->dev, "error reading header\n"); return -EIO; } - *buf++ = atmel_getb(chip, 0); + *buf++ = ioread8(chip->vendor->iobase); } /* size of the data received */ @@ -64,10 +63,9 @@ static int tpm_atml_recv(struct tpm_chip *chip, u8 *buf, size_t count) dev_err(chip->dev, "Recv size(%d) less than available space\n", size); for (; i < size; i++) { /* clear the waiting data anyway */ - status = atmel_getb(chip, 1); + status = ioread8(chip->vendor->iobase + 1); if ((status & ATML_STATUS_DATA_AVAIL) == 0) { - dev_err(chip->dev, - "error reading data\n"); + dev_err(chip->dev, "error reading data\n"); return -EIO; } } @@ -76,17 +74,17 @@ static int tpm_atml_recv(struct tpm_chip *chip, u8 *buf, size_t count) /* read all the data available */ for (; i < size; i++) { - status = atmel_getb(chip, 1); + status = ioread8(chip->vendor->iobase + 1); if ((status & ATML_STATUS_DATA_AVAIL) == 0) { - dev_err(chip->dev, - "error reading data\n"); + dev_err(chip->dev, "error reading data\n"); return -EIO; } - *buf++ = atmel_getb(chip, 0); + *buf++ = ioread8(chip->vendor->iobase); } /* make sure data available is gone */ - status = atmel_getb(chip, 1); + status = ioread8(chip->vendor->iobase + 1); + if (status & ATML_STATUS_DATA_AVAIL) { dev_err(chip->dev, "data available is stuck\n"); return -EIO; @@ -102,7 +100,7 @@ static int tpm_atml_send(struct tpm_chip *chip, u8 *buf, size_t count) dev_dbg(chip->dev, "tpm_atml_send:\n"); for (i = 0; i < count; i++) { dev_dbg(chip->dev, "%d 0x%x(%d)\n", i, buf[i], buf[i]); - atmel_putb(buf[i], chip, 0); + iowrite8(buf[i], chip->vendor->iobase); } return count; @@ -110,12 +108,12 @@ static int tpm_atml_send(struct tpm_chip *chip, u8 *buf, size_t count) static void tpm_atml_cancel(struct tpm_chip *chip) { - atmel_putb(ATML_STATUS_ABORT, chip, 1); + iowrite8(ATML_STATUS_ABORT, chip->vendor->iobase + 1); } static u8 tpm_atml_status(struct tpm_chip *chip) { - return atmel_getb(chip, 1); + return ioread8(chip->vendor->iobase + 1); } static struct file_operations atmel_ops = { @@ -162,7 +160,8 @@ static void atml_plat_remove(void) if (chip) { if (chip->vendor->have_region) - atmel_release_region(chip->vendor->base, chip->vendor->region_size); + atmel_release_region(chip->vendor->base, + chip->vendor->region_size); atmel_put_base_addr(chip->vendor); tpm_remove_hardware(chip->dev); platform_device_unregister(pdev); @@ -183,14 +182,19 @@ static int __init init_atmel(void) driver_register(&atml_drv); - if (atmel_get_base_addr(&tpm_atmel) != 0) { + if ((tpm_atmel.iobase = atmel_get_base_addr(&tpm_atmel)) == NULL) { rc = -ENODEV; goto err_unreg_drv; } - tpm_atmel.have_region = (atmel_request_region( tpm_atmel.base, tpm_atmel.region_size, "tpm_atmel0") == NULL) ? 0 : 1; + tpm_atmel.have_region = + (atmel_request_region + (tpm_atmel.base, tpm_atmel.region_size, + "tpm_atmel0") == NULL) ? 0 : 1; - if (IS_ERR(pdev = platform_device_register_simple("tpm_atmel", -1, NULL, 0 ))) { + if (IS_ERR + (pdev = + platform_device_register_simple("tpm_atmel", -1, NULL, 0))) { rc = PTR_ERR(pdev); goto err_rel_reg; } @@ -202,9 +206,10 @@ static int __init init_atmel(void) err_unreg_dev: platform_device_unregister(pdev); err_rel_reg: - if (tpm_atmel.have_region) - atmel_release_region(tpm_atmel.base, tpm_atmel.region_size); atmel_put_base_addr(&tpm_atmel); + if (tpm_atmel.have_region) + atmel_release_region(tpm_atmel.base, + tpm_atmel.region_size); err_unreg_drv: driver_unregister(&atml_drv); return rc; diff --git a/drivers/char/tpm/tpm_atmel.h b/drivers/char/tpm/tpm_atmel.h index 3c5b9a8d1c49..d3478aaadd77 100644 --- a/drivers/char/tpm/tpm_atmel.h +++ b/drivers/char/tpm/tpm_atmel.h @@ -27,12 +27,14 @@ #define atmel_putb(val, chip, offset) writeb(val, chip->vendor->iobase + offset) #define atmel_request_region request_mem_region #define atmel_release_region release_mem_region -static inline void atmel_put_base_addr(struct tpm_vendor_specific *vendor) + +static inline void atmel_put_base_addr(struct tpm_vendor_specific + *vendor) { iounmap(vendor->iobase); } -static int atmel_get_base_addr(struct tpm_vendor_specific *vendor) +static void __iomem * atmel_get_base_addr(struct tpm_vendor_specific *vendor) { struct device_node *dn; unsigned long address, size; @@ -44,11 +46,11 @@ static int atmel_get_base_addr(struct tpm_vendor_specific *vendor) dn = of_find_node_by_name(NULL, "tpm"); if (!dn) - return 1; + return NULL; if (!device_is_compatible(dn, "AT97SC3201")) { of_node_put(dn); - return 1; + return NULL; } reg = (unsigned int *) get_property(dn, "reg", ®len); @@ -71,8 +73,7 @@ static int atmel_get_base_addr(struct tpm_vendor_specific *vendor) vendor->base = address; vendor->region_size = size; - vendor->iobase = ioremap(address, size); - return 0; + return ioremap(vendor->base, vendor->region_size); } #else #define atmel_getb(chip, offset) inb(chip->vendor->base + offset) @@ -105,18 +106,19 @@ static int atmel_verify_tpm11(void) return 0; } -static inline void atmel_put_base_addr(struct tpm_vendor_specific *vendor) +static inline void atmel_put_base_addr(struct tpm_vendor_specific + *vendor) { } /* Determine where to talk to device */ -static unsigned long atmel_get_base_addr(struct tpm_vendor_specific +static void __iomem * atmel_get_base_addr(struct tpm_vendor_specific *vendor) { int lo, hi; if (atmel_verify_tpm11() != 0) - return 1; + return NULL; lo = tpm_read_index(TPM_ADDR, TPM_ATMEL_BASE_ADDR_LO); hi = tpm_read_index(TPM_ADDR, TPM_ATMEL_BASE_ADDR_HI); @@ -124,6 +126,6 @@ static unsigned long atmel_get_base_addr(struct tpm_vendor_specific vendor->base = (hi << 8) | lo; vendor->region_size = 2; - return 0; + return ioport_map(vendor->base, vendor->region_size); } #endif From c4b32b8b010d036dc03f77b0ef2a747db0cc3588 Mon Sep 17 00:00:00 2001 From: Kylene Jo Hall Date: Fri, 18 Nov 2005 01:10:59 -0800 Subject: [PATCH 28/35] [PATCH] tpm: remove PCI kconfig dependency The driver dependencies on PCI have been removed. This patch clears that up in the Kconfig file Signed-off-by: Kylene Hall Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/tpm/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig index b58adfe3ed19..a6873bf89ffa 100644 --- a/drivers/char/tpm/Kconfig +++ b/drivers/char/tpm/Kconfig @@ -6,7 +6,7 @@ menu "TPM devices" config TCG_TPM tristate "TPM Hardware Support" - depends on EXPERIMENTAL && PCI + depends on EXPERIMENTAL ---help--- If you have a TPM security chip in your system, which implements the Trusted Computing Group's specification, From 34ef75f09f09611b62ae11ae36c3c7b0a6a8a9cb Mon Sep 17 00:00:00 2001 From: Neil Brown Date: Fri, 18 Nov 2005 01:10:59 -0800 Subject: [PATCH 29/35] [PATCH] md: don't pass a NULL file* into ->prepare_write() Some filesystems go oops. Signed-off-by: Neil Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/md/bitmap.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c index 51315302a85e..252d55df9642 100644 --- a/drivers/md/bitmap.c +++ b/drivers/md/bitmap.c @@ -326,9 +326,9 @@ static int write_page(struct bitmap *bitmap, struct page *page, int wait) } } - ret = page->mapping->a_ops->prepare_write(NULL, page, 0, PAGE_SIZE); + ret = page->mapping->a_ops->prepare_write(bitmap->file, page, 0, PAGE_SIZE); if (!ret) - ret = page->mapping->a_ops->commit_write(NULL, page, 0, + ret = page->mapping->a_ops->commit_write(bitmap->file, page, 0, PAGE_SIZE); if (ret) { unlock_page(page); From c0e485216de80046dd0d448b7cd530dbfc31402f Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 18 Nov 2005 01:11:01 -0800 Subject: [PATCH 30/35] [PATCH] md: fix is_mddev_idle calculation now that disk/sector accounting happens when request completes md needs to monitor the rate of requests to its devices when doing resync/recovery so that it can back-off when there is non-resync IO. It does this by comparing resync IO, which it counts, with total IO which is taken from disk_stats. disk_stats were recently changed to account sectors when a request completes instead of when it is queued. This upsets md's calculations. We could do the sync_io accounting at the end of requests too, but that has problems. If an underlying device is an md array, the accounting will still be done when the request is submitted. This could be changed for some raid levels, but it cannot be changed for raid0 or linear without substantial code changes. So instead, we increase the error that is_mddev_idle allows, up to the maximum amount of resync IO that can be in flight at any time. The calculation is current fragile as each personality as different limits for in-flight resync. This should be fixed up. For now, this simple patch fixes the problem. Increasing the error margin decreases the sensitivity to non-resync IO. To partially compensate for this, the time to wait when non-resync IO is detected is increased so that less steady IO is required to keep the resync at bay. Signed-off-by: Neil Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/md/md.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index f3fed662f32e..78c7418478d6 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -3846,11 +3846,20 @@ static int is_mddev_idle(mddev_t *mddev) curr_events = disk_stat_read(disk, sectors[0]) + disk_stat_read(disk, sectors[1]) - atomic_read(&disk->sync_io); - /* Allow some slack between valud of curr_events and last_events, - * as there are some uninteresting races. + /* The difference between curr_events and last_events + * will be affected by any new non-sync IO (making + * curr_events bigger) and any difference in the amount of + * in-flight syncio (making current_events bigger or smaller) + * The amount in-flight is currently limited to + * 32*64K in raid1/10 and 256*PAGE_SIZE in raid5/6 + * which is at most 4096 sectors. + * These numbers are fairly fragile and should be made + * more robust, probably by enforcing the + * 'window size' that md_do_sync sort-of uses. + * * Note: the following is an unsigned comparison. */ - if ((curr_events - rdev->last_events + 32) > 64) { + if ((curr_events - rdev->last_events + 4096) > 8192) { rdev->last_events = curr_events; idle = 0; } @@ -4109,7 +4118,7 @@ static void md_do_sync(mddev_t *mddev) if (currspeed > sysctl_speed_limit_min) { if ((currspeed > sysctl_speed_limit_max) || !is_mddev_idle(mddev)) { - msleep(250); + msleep(500); goto repeat; } } From b50ce2324cecf4efc7babe31f4aa1a07f9157317 Mon Sep 17 00:00:00 2001 From: Andy Whitcroft Date: Fri, 18 Nov 2005 01:11:02 -0800 Subject: [PATCH 31/35] [PATCH] ppc64 need HPAGE_SHIFT when huge pages disabled With the new powerpc architecture we don't seem to be able to disable huge pages anymore. mm/built-in.o(.toc1+0xae0): undefined reference to `HPAGE_SHIFT' make: *** [.tmp_vmlinux1] Error 1 We seem to need to define HPAGE_SHIFT to something when HUGETLB_PAGE isn't defined. This patch defines it to PAGE_SHIFT when we have no support. Signed-off-by: Andy Whitcroft Cc: Paul Mackerras Cc: Benjamin Herrenschmidt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-powerpc/page_64.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/include/asm-powerpc/page_64.h b/include/asm-powerpc/page_64.h index c16f106b5373..1e6e7846824f 100644 --- a/include/asm-powerpc/page_64.h +++ b/include/asm-powerpc/page_64.h @@ -86,7 +86,11 @@ static inline void copy_page(void *to, void *from) extern u64 ppc64_pft_size; /* Large pages size */ +#ifdef CONFIG_HUGETLB_PAGE extern unsigned int HPAGE_SHIFT; +#else +#define HPAGE_SHIFT PAGE_SHIFT +#endif #define HPAGE_SIZE ((1UL) << HPAGE_SHIFT) #define HPAGE_MASK (~(HPAGE_SIZE - 1)) #define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT) From fc71fe40d2bedcc57d3406bf2050481f8b3441b6 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Fri, 18 Nov 2005 01:11:03 -0800 Subject: [PATCH 32/35] [PATCH] s390: fix class_device_create calls in 3270 the driver Add the missing NULL argument to the class_device_create calls. Signed-off-by: Martin Schwidefsky Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/s390/char/raw3270.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/s390/char/raw3270.c b/drivers/s390/char/raw3270.c index f5b7d360fc10..1026f2bc3185 100644 --- a/drivers/s390/char/raw3270.c +++ b/drivers/s390/char/raw3270.c @@ -1179,12 +1179,12 @@ raw3270_create_attributes(struct raw3270 *rp) //FIXME: check return code sysfs_create_group(&rp->cdev->dev.kobj, &raw3270_attr_group); rp->clttydev = - class_device_create(class3270, + class_device_create(class3270, NULL, MKDEV(IBM_TTY3270_MAJOR, rp->minor), &rp->cdev->dev, "tty%s", rp->cdev->dev.bus_id); rp->cltubdev = - class_device_create(class3270, + class_device_create(class3270, NULL, MKDEV(IBM_FS3270_MAJOR, rp->minor), &rp->cdev->dev, "tub%s", rp->cdev->dev.bus_id); From 6fb0425b99e00d4d73012264785c662e1783755f Mon Sep 17 00:00:00 2001 From: Jody McIntyre Date: Fri, 18 Nov 2005 09:31:06 -0800 Subject: [PATCH 33/35] [PATCH] Add SCM info to MAINTAINERS Add tree information to MAINTAINERS file. Signed-off-by: Jody McIntyre Signed-off-by: Greg Kroah-Hartman Signed-off-by: Linus Torvalds --- MAINTAINERS | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 509927e40bbb..f239ac4762dd 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -58,6 +58,7 @@ P: Person M: Mail patches to L: Mailing list that is relevant to this area W: Web-page with status/info +T: SCM tree type and URL. Type is one of: git, hg, quilt. S: Status, one of the following: Supported: Someone is actually paid to look after this. @@ -183,6 +184,7 @@ P: Len Brown M: len.brown@intel.com L: acpi-devel@lists.sourceforge.net W: http://acpi.sourceforge.net/ +T: git kernel.org:/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6.git S: Maintained AD1816 SOUND DRIVER @@ -418,6 +420,7 @@ BLOCK LAYER P: Jens Axboe M: axboe@suse.de L: linux-kernel@vger.kernel.org +T: git kernel.org:/pub/scm/linux/kernel/git/axboe/linux-2.6-block.git S: Maintained BLUETOOTH SUBSYSTEM @@ -803,12 +806,14 @@ DRIVER CORE, KOBJECTS, AND SYSFS P: Greg Kroah-Hartman M: gregkh@suse.de L: linux-kernel@vger.kernel.org +T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/ S: Supported DRM DRIVERS P: David Airlie M: airlied@linux.ie L: dri-devel@lists.sourceforge.net +T: git kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6.git S: Maintained DSCC4 DRIVER @@ -1113,6 +1118,7 @@ P: Jean Delvare M: khali@linux-fr.org L: lm-sensors@lm-sensors.org W: http://www.lm-sensors.nu/ +T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/ S: Maintained I2O @@ -1145,6 +1151,7 @@ P: Tony Luck M: tony.luck@intel.com L: linux-ia64@vger.kernel.org W: http://www.ia64-linux.org/ +T: git kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6.git S: Maintained SN-IA64 (Itanium) SUB-PLATFORM @@ -1212,6 +1219,7 @@ P: Jody McIntyre M: scjody@steamballoon.com L: linux1394-devel@lists.sourceforge.net W: http://www.linux1394.org/ +T: git kernel.org:/pub/scm/linux/kernel/git/scjody/ieee1394.git S: Maintained IEEE 1394 OHCI DRIVER @@ -1263,6 +1271,7 @@ P: Hal Rosenstock M: halr@voltaire.com L: openib-general@openib.org W: http://www.openib.org/ +T: git kernel.org:/pub/scm/linux/kernel/git/roland/infiniband.git S: Supported INPUT (KEYBOARD, MOUSE, JOYSTICK) DRIVERS @@ -1436,6 +1445,7 @@ P: Kai Germaschewski M: kai@germaschewski.name P: Sam Ravnborg M: sam@ravnborg.org +T: git kernel.org:/pub/scm/linux/kernel/git/sam/kbuild.git S: Maintained KERNEL JANITORS @@ -1782,6 +1792,7 @@ M: akpm@osdl.org P: Jeff Garzik M: jgarzik@pobox.com L: netdev@vger.kernel.org +T: git kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git S: Maintained NETWORKING [GENERAL] @@ -1959,6 +1970,7 @@ P: Greg Kroah-Hartman M: gregkh@suse.de L: linux-kernel@vger.kernel.org L: linux-pci@atrey.karlin.mff.cuni.cz +T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/ S: Supported PCI HOTPLUG CORE @@ -1980,6 +1992,7 @@ S: Maintained PCMCIA SUBSYSTEM P: Linux PCMCIA Team L: http://lists.infradead.org/mailman/listinfo/linux-pcmcia +T: git kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6.git S: Maintained PCNET32 NETWORK DRIVER @@ -2189,6 +2202,7 @@ SCSI SUBSYSTEM P: James E.J. Bottomley M: James.Bottomley@SteelEye.com L: linux-scsi@vger.kernel.org +T: git kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git S: Maintained SCSI TAPE DRIVER @@ -2228,6 +2242,7 @@ SERIAL ATA (SATA) SUBSYSTEM: P: Jeff Garzik M: jgarzik@pobox.com L: linux-ide@vger.kernel.org +T: git kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git S: Supported SGI SN-IA64 (Altix) SERIAL CONSOLE DRIVER @@ -2749,6 +2764,7 @@ M: gregkh@suse.de L: linux-usb-users@lists.sourceforge.net L: linux-usb-devel@lists.sourceforge.net W: http://www.linux-usb.org +T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/ S: Supported USB UHCI DRIVER From d36cc9d0813f813408a1f0bed5e8ced358bb43bf Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 18 Nov 2005 09:31:11 -0800 Subject: [PATCH 34/35] [PATCH] Add HOWTO do kernel development document to the Documentation directory Here's a document that describes the process and procedures of how to do Linux kernel development. It has gone through a number of rounds of review on the linux-kernel mailing list, and contains contributions and help from Paolo Ciarrocchi, Randy Dunlap, Gerrit Huizenga, Pat Mochel, Hanna Linder, Kay Sievers, Vojtech Pavlik, Jan Kara, Josh Boyer, Kees Cook, Andrew Morton, Andi Kleen, Vadim Lobanov, Jesper Juhl, Adrian Bunk, Keri Harris, Frans Pop, David A. Wheeler, Junio Hamano, Michael Kerrisk, and Alex Shepard. Signed-off-by: Greg Kroah-Hartman Signed-off-by: Linus Torvalds --- Documentation/00-INDEX | 2 + Documentation/HOWTO | 618 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 620 insertions(+) create mode 100644 Documentation/HOWTO diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX index 433cf5e9ae04..2903337d564f 100644 --- a/Documentation/00-INDEX +++ b/Documentation/00-INDEX @@ -24,6 +24,8 @@ DMA-mapping.txt - info for PCI drivers using DMA portably across all platforms. DocBook/ - directory with DocBook templates etc. for kernel documentation. +HOWTO + - The process and procedures of how to do Linux kernel development. IO-mapping.txt - how to access I/O mapped memory from within device drivers. IPMI.txt diff --git a/Documentation/HOWTO b/Documentation/HOWTO new file mode 100644 index 000000000000..6c9e746267da --- /dev/null +++ b/Documentation/HOWTO @@ -0,0 +1,618 @@ +HOWTO do Linux kernel development +--------------------------------- + +This is the be-all, end-all document on this topic. It contains +instructions on how to become a Linux kernel developer and how to learn +to work with the Linux kernel development community. It tries to not +contain anything related to the technical aspects of kernel programming, +but will help point you in the right direction for that. + +If anything in this document becomes out of date, please send in patches +to the maintainer of this file, who is listed at the bottom of the +document. + + +Introduction +------------ + +So, you want to learn how to become a Linux kernel developer? Or you +have been told by your manager, "Go write a Linux driver for this +device." This document's goal is to teach you everything you need to +know to achieve this by describing the process you need to go through, +and hints on how to work with the community. It will also try to +explain some of the reasons why the community works like it does. + +The kernel is written mostly in C, with some architecture-dependent +parts written in assembly. A good understanding of C is required for +kernel development. Assembly (any architecture) is not required unless +you plan to do low-level development for that architecture. Though they +are not a good substitute for a solid C education and/or years of +experience, the following books are good for, if anything, reference: + - "The C Programming Language" by Kernighan and Ritchie [Prentice Hall] + - "Practical C Programming" by Steve Oualline [O'Reilly] + +The kernel is written using GNU C and the GNU toolchain. While it +adheres to the ISO C89 standard, it uses a number of extensions that are +not featured in the standard. The kernel is a freestanding C +environment, with no reliance on the standard C library, so some +portions of the C standard are not supported. Arbitrary long long +divisions and floating point are not allowed. It can sometimes be +difficult to understand the assumptions the kernel has on the toolchain +and the extensions that it uses, and unfortunately there is no +definitive reference for them. Please check the gcc info pages (`info +gcc`) for some information on them. + +Please remember that you are trying to learn how to work with the +existing development community. It is a diverse group of people, with +high standards for coding, style and procedure. These standards have +been created over time based on what they have found to work best for +such a large and geographically dispersed team. Try to learn as much as +possible about these standards ahead of time, as they are well +documented; do not expect people to adapt to you or your company's way +of doing things. + + +Legal Issues +------------ + +The Linux kernel source code is released under the GPL. Please see the +file, COPYING, in the main directory of the source tree, for details on +the license. If you have further questions about the license, please +contact a lawyer, and do not ask on the Linux kernel mailing list. The +people on the mailing lists are not lawyers, and you should not rely on +their statements on legal matters. + +For common questions and answers about the GPL, please see: + http://www.gnu.org/licenses/gpl-faq.html + + +Documentation +------------ + +The Linux kernel source tree has a large range of documents that are +invaluable for learning how to interact with the kernel community. When +new features are added to the kernel, it is recommended that new +documentation files are also added which explain how to use the feature. +When a kernel change causes the interface that the kernel exposes to +userspace to change, it is recommended that you send the information or +a patch to the manual pages explaining the change to the manual pages +maintainer at mtk-manpages@gmx.net. + +Here is a list of files that are in the kernel source tree that are +required reading: + README + This file gives a short background on the Linux kernel and describes + what is necessary to do to configure and build the kernel. People + who are new to the kernel should start here. + + Documentation/Changes + This file gives a list of the minimum levels of various software + packages that are necessary to build and run the kernel + successfully. + + Documentation/CodingStyle + This describes the Linux kernel coding style, and some of the + rationale behind it. All new code is expected to follow the + guidelines in this document. Most maintainers will only accept + patches if these rules are followed, and many people will only + review code if it is in the proper style. + + Documentation/SubmittingPatches + Documentation/SubmittingDrivers + These files describe in explicit detail how to successfully create + and send a patch, including (but not limited to): + - Email contents + - Email format + - Who to send it to + Following these rules will not guarantee success (as all patches are + subject to scrutiny for content and style), but not following them + will almost always prevent it. + + Other excellent descriptions of how to create patches properly are: + "The Perfect Patch" + http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt + "Linux kernel patch submission format" + http://linux.yyz.us/patch-format.html + + Documentation/stable_api_nonsense.txt + This file describes the rationale behind the conscious decision to + not have a stable API within the kernel, including things like: + - Subsystem shim-layers (for compatibility?) + - Driver portability between Operating Systems. + - Mitigating rapid change within the kernel source tree (or + preventing rapid change) + This document is crucial for understanding the Linux development + philosophy and is very important for people moving to Linux from + development on other Operating Systems. + + Documentation/SecurityBugs + If you feel you have found a security problem in the Linux kernel, + please follow the steps in this document to help notify the kernel + developers, and help solve the issue. + + Documentation/ManagementStyle + This document describes how Linux kernel maintainers operate and the + shared ethos behind their methodologies. This is important reading + for anyone new to kernel development (or anyone simply curious about + it), as it resolves a lot of common misconceptions and confusion + about the unique behavior of kernel maintainers. + + Documentation/stable_kernel_rules.txt + This file describes the rules on how the stable kernel releases + happen, and what to do if you want to get a change into one of these + releases. + + Documentation/kernel-docs.txt + A list of external documentation that pertains to kernel + development. Please consult this list if you do not find what you + are looking for within the in-kernel documentation. + + Documentation/applying-patches.txt + A good introduction describing exactly what a patch is and how to + apply it to the different development branches of the kernel. + +The kernel also has a large number of documents that can be +automatically generated from the source code itself. This includes a +full description of the in-kernel API, and rules on how to handle +locking properly. The documents will be created in the +Documentation/DocBook/ directory and can be generated as PDF, +Postscript, HTML, and man pages by running: + make pdfdocs + make psdocs + make htmldocs + make mandocs +respectively from the main kernel source directory. + + +Becoming A Kernel Developer +--------------------------- + +If you do not know anything about Linux kernel development, you should +look at the Linux KernelNewbies project: + http://kernelnewbies.org +It consists of a helpful mailing list where you can ask almost any type +of basic kernel development question (make sure to search the archives +first, before asking something that has already been answered in the +past.) It also has an IRC channel that you can use to ask questions in +real-time, and a lot of helpful documentation that is useful for +learning about Linux kernel development. + +The website has basic information about code organization, subsystems, +and current projects (both in-tree and out-of-tree). It also describes +some basic logistical information, like how to compile a kernel and +apply a patch. + +If you do not know where you want to start, but you want to look for +some task to start doing to join into the kernel development community, +go to the Linux Kernel Janitor's project: + http://janitor.kernelnewbies.org/ +It is a great place to start. It describes a list of relatively simple +problems that need to be cleaned up and fixed within the Linux kernel +source tree. Working with the developers in charge of this project, you +will learn the basics of getting your patch into the Linux kernel tree, +and possibly be pointed in the direction of what to go work on next, if +you do not already have an idea. + +If you already have a chunk of code that you want to put into the kernel +tree, but need some help getting it in the proper form, the +kernel-mentors project was created to help you out with this. It is a +mailing list, and can be found at: + http://selenic.com/mailman/listinfo/kernel-mentors + +Before making any actual modifications to the Linux kernel code, it is +imperative to understand how the code in question works. For this +purpose, nothing is better than reading through it directly (most tricky +bits are commented well), perhaps even with the help of specialized +tools. One such tool that is particularly recommended is the Linux +Cross-Reference project, which is able to present source code in a +self-referential, indexed webpage format. An excellent up-to-date +repository of the kernel code may be found at: + http://sosdg.org/~coywolf/lxr/ + + +The development process +----------------------- + +Linux kernel development process currently consists of a few different +main kernel "branches" and lots of different subsystem-specific kernel +branches. These different branches are: + - main 2.6.x kernel tree + - 2.6.x.y -stable kernel tree + - 2.6.x -git kernel patches + - 2.6.x -mm kernel patches + - subsystem specific kernel trees and patches + +2.6.x kernel tree +----------------- +2.6.x kernels are maintained by Linus Torvalds, and can be found on +kernel.org in the pub/linux/kernel/v2.6/ directory. Its development +process is as follows: + - As soon as a new kernel is released a two weeks window is open, + during this period of time maintainers can submit big diffs to + Linus, usually the patches that have already been included in the + -mm kernel for a few weeks. The preferred way to submit big changes + is using git (the kernel's source management tool, more information + can be found at http://git.or.cz/) but plain patches are also just + fine. + - After two weeks a -rc1 kernel is released it is now possible to push + only patches that do not include new features that could affect the + stability of the whole kernel. Please note that a whole new driver + (or filesystem) might be accepted after -rc1 because there is no + risk of causing regressions with such a change as long as the change + is self-contained and does not affect areas outside of the code that + is being added. git can be used to send patches to Linus after -rc1 + is released, but the patches need to also be sent to a public + mailing list for review. + - A new -rc is released whenever Linus deems the current git tree to + be in a reasonably sane state adequate for testing. The goal is to + release a new -rc kernel every week. + - Process continues until the kernel is considered "ready", the + process should last around 6 weeks. + +It is worth mentioning what Andrew Morton wrote on the linux-kernel +mailing list about kernel releases: + "Nobody knows when a kernel will be released, because it's + released according to perceived bug status, not according to a + preconceived timeline." + +2.6.x.y -stable kernel tree +--------------------------- +Kernels with 4 digit versions are -stable kernels. They contain +relatively small and critical fixes for security problems or significant +regressions discovered in a given 2.6.x kernel. + +This is the recommended branch for users who want the most recent stable +kernel and are not interested in helping test development/experimental +versions. + +If no 2.6.x.y kernel is available, then the highest numbered 2.6.x +kernel is the current stable kernel. + +2.6.x.y are maintained by the "stable" team , and are +released almost every other week. + +The file Documentation/stable_kernel_rules.txt in the kernel tree +documents what kinds of changes are acceptable for the -stable tree, and +how the release process works. + +2.6.x -git patches +------------------ +These are daily snapshots of Linus' kernel tree which are managed in a +git repository (hence the name.) These patches are usually released +daily and represent the current state of Linus' tree. They are more +experimental than -rc kernels since they are generated automatically +without even a cursory glance to see if they are sane. + +2.6.x -mm kernel patches +------------------------ +These are experimental kernel patches released by Andrew Morton. Andrew +takes all of the different subsystem kernel trees and patches and mushes +them together, along with a lot of patches that have been plucked from +the linux-kernel mailing list. This tree serves as a proving ground for +new features and patches. Once a patch has proved its worth in -mm for +a while Andrew or the subsystem maintainer pushes it on to Linus for +inclusion in mainline. + +It is heavily encouraged that all new patches get tested in the -mm tree +before they are sent to Linus for inclusion in the main kernel tree. + +These kernels are not appropriate for use on systems that are supposed +to be stable and they are more risky to run than any of the other +branches. + +If you wish to help out with the kernel development process, please test +and use these kernel releases and provide feedback to the linux-kernel +mailing list if you have any problems, and if everything works properly. + +In addition to all the other experimental patches, these kernels usually +also contain any changes in the mainline -git kernels available at the +time of release. + +The -mm kernels are not released on a fixed schedule, but usually a few +-mm kernels are released in between each -rc kernel (1 to 3 is common). + +Subsystem Specific kernel trees and patches +------------------------------------------- +A number of the different kernel subsystem developers expose their +development trees so that others can see what is happening in the +different areas of the kernel. These trees are pulled into the -mm +kernel releases as described above. + +Here is a list of some of the different kernel trees available: + git trees: + - Kbuild development tree, Sam Ravnborg + kernel.org:/pub/scm/linux/kernel/git/sam/kbuild.git + + - ACPI development tree, Len Brown + kernel.org:/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6.git + + - Block development tree, Jens Axboe + kernel.org:/pub/scm/linux/kernel/git/axboe/linux-2.6-block.git + + - DRM development tree, Dave Airlie + kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6.git + + - ia64 development tree, Tony Luck + kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6.git + + - ieee1394 development tree, Jody McIntyre + kernel.org:/pub/scm/linux/kernel/git/scjody/ieee1394.git + + - infiniband, Roland Dreier + kernel.org:/pub/scm/linux/kernel/git/roland/infiniband.git + + - libata, Jeff Garzik + kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git + + - network drivers, Jeff Garzik + kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git + + - pcmcia, Dominik Brodowski + kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6.git + + - SCSI, James Bottomley + kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git + + Other git kernel trees can be found listed at http://kernel.org/git + + quilt trees: + - USB, PCI, Driver Core, and I2C, Greg Kroah-Hartman + kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/ + + +Bug Reporting +------------- + +bugzilla.kernel.org is where the Linux kernel developers track kernel +bugs. Users are encouraged to report all bugs that they find in this +tool. For details on how to use the kernel bugzilla, please see: + http://test.kernel.org/bugzilla/faq.html + +The file REPORTING-BUGS in the main kernel source directory has a good +template for how to report a possible kernel bug, and details what kind +of information is needed by the kernel developers to help track down the +problem. + + +Mailing lists +------------- + +As some of the above documents describe, the majority of the core kernel +developers participate on the Linux Kernel Mailing list. Details on how +to subscribe and unsubscribe from the list can be found at: + http://vger.kernel.org/vger-lists.html#linux-kernel +There are archives of the mailing list on the web in many different +places. Use a search engine to find these archives. For example: + http://dir.gmane.org/gmane.linux.kernel +It is highly recommended that you search the archives about the topic +you want to bring up, before you post it to the list. A lot of things +already discussed in detail are only recorded at the mailing list +archives. + +Most of the individual kernel subsystems also have their own separate +mailing list where they do their development efforts. See the +MAINTAINERS file for a list of what these lists are for the different +groups. + +Many of the lists are hosted on kernel.org. Information on them can be +found at: + http://vger.kernel.org/vger-lists.html + +Please remember to follow good behavioral habits when using the lists. +Though a bit cheesy, the following URL has some simple guidelines for +interacting with the list (or any list): + http://www.albion.com/netiquette/ + +If multiple people respond to your mail, the CC: list of recipients may +get pretty large. Don't remove anybody from the CC: list without a good +reason, or don't reply only to the list address. Get used to receiving the +mail twice, one from the sender and the one from the list, and don't try +to tune that by adding fancy mail-headers, people will not like it. + +Remember to keep the context and the attribution of your replies intact, +keep the "John Kernelhacker wrote ...:" lines at the top of your reply, and +add your statements between the individual quoted sections instead of +writing at the top of the mail. + +If you add patches to your mail, make sure they are plain readable text +as stated in Documentation/SubmittingPatches. Kernel developers don't +want to deal with attachments or compressed patches; they may want +to comment on individual lines of your patch, which works only that way. +Make sure you use a mail program that does not mangle spaces and tab +characters. A good first test is to send the mail to yourself and try +to apply your own patch by yourself. If that doesn't work, get your +mail program fixed or change it until it works. + +Above all, please remember to show respect to other subscribers. + + +Working with the community +-------------------------- + +The goal of the kernel community is to provide the best possible kernel +there is. When you submit a patch for acceptance, it will be reviewed +on its technical merits and those alone. So, what should you be +expecting? + - criticism + - comments + - requests for change + - requests for justification + - silence + +Remember, this is part of getting your patch into the kernel. You have +to be able to take criticism and comments about your patches, evaluate +them at a technical level and either rework your patches or provide +clear and concise reasoning as to why those changes should not be made. +If there are no responses to your posting, wait a few days and try +again, sometimes things get lost in the huge volume. + +What should you not do? + - expect your patch to be accepted without question + - become defensive + - ignore comments + - resubmit the patch without making any of the requested changes + +In a community that is looking for the best technical solution possible, +there will always be differing opinions on how beneficial a patch is. +You have to be cooperative, and willing to adapt your idea to fit within +the kernel. Or at least be willing to prove your idea is worth it. +Remember, being wrong is acceptable as long as you are willing to work +toward a solution that is right. + +It is normal that the answers to your first patch might simply be a list +of a dozen things you should correct. This does _not_ imply that your +patch will not be accepted, and it is _not_ meant against you +personally. Simply correct all issues raised against your patch and +resend it. + + +Differences between the kernel community and corporate structures +----------------------------------------------------------------- + +The kernel community works differently than most traditional corporate +development environments. Here are a list of things that you can try to +do to try to avoid problems: + Good things to say regarding your proposed changes: + - "This solves multiple problems." + - "This deletes 2000 lines of code." + - "Here is a patch that explains what I am trying to describe." + - "I tested it on 5 different architectures..." + - "Here is a series of small patches that..." + - "This increases performance on typical machines..." + + Bad things you should avoid saying: + - "We did it this way in AIX/ptx/Solaris, so therefore it must be + good..." + - "I've being doing this for 20 years, so..." + - "This is required for my company to make money" + - "This is for our Enterprise product line." + - "Here is my 1000 page design document that describes my idea" + - "I've been working on this for 6 months..." + - "Here's a 5000 line patch that..." + - "I rewrote all of the current mess, and here it is..." + - "I have a deadline, and this patch needs to be applied now." + +Another way the kernel community is different than most traditional +software engineering work environments is the faceless nature of +interaction. One benefit of using email and irc as the primary forms of +communication is the lack of discrimination based on gender or race. +The Linux kernel work environment is accepting of women and minorities +because all you are is an email address. The international aspect also +helps to level the playing field because you can't guess gender based on +a person's name. A man may be named Andrea and a woman may be named Pat. +Most women who have worked in the Linux kernel and have expressed an +opinion have had positive experiences. + +The language barrier can cause problems for some people who are not +comfortable with English. A good grasp of the language can be needed in +order to get ideas across properly on mailing lists, so it is +recommended that you check your emails to make sure they make sense in +English before sending them. + + +Break up your changes +--------------------- + +The Linux kernel community does not gladly accept large chunks of code +dropped on it all at once. The changes need to be properly introduced, +discussed, and broken up into tiny, individual portions. This is almost +the exact opposite of what companies are used to doing. Your proposal +should also be introduced very early in the development process, so that +you can receive feedback on what you are doing. It also lets the +community feel that you are working with them, and not simply using them +as a dumping ground for your feature. However, don't send 50 emails at +one time to a mailing list, your patch series should be smaller than +that almost all of the time. + +The reasons for breaking things up are the following: + +1) Small patches increase the likelihood that your patches will be + applied, since they don't take much time or effort to verify for + correctness. A 5 line patch can be applied by a maintainer with + barely a second glance. However, a 500 line patch may take hours to + review for correctness (the time it takes is exponentially + proportional to the size of the patch, or something). + + Small patches also make it very easy to debug when something goes + wrong. It's much easier to back out patches one by one than it is + to dissect a very large patch after it's been applied (and broken + something). + +2) It's important not only to send small patches, but also to rewrite + and simplify (or simply re-order) patches before submitting them. + +Here is an analogy from kernel developer Al Viro: + "Think of a teacher grading homework from a math student. The + teacher does not want to see the student's trials and errors + before they came up with the solution. They want to see the + cleanest, most elegant answer. A good student knows this, and + would never submit her intermediate work before the final + solution." + + The same is true of kernel development. The maintainers and + reviewers do not want to see the thought process behind the + solution to the problem one is solving. They want to see a + simple and elegant solution." + +It may be challenging to keep the balance between presenting an elegant +solution and working together with the community and discussing your +unfinished work. Therefore it is good to get early in the process to +get feedback to improve your work, but also keep your changes in small +chunks that they may get already accepted, even when your whole task is +not ready for inclusion now. + +Also realize that it is not acceptable to send patches for inclusion +that are unfinished and will be "fixed up later." + + +Justify your change +------------------- + +Along with breaking up your patches, it is very important for you to let +the Linux community know why they should add this change. New features +must be justified as being needed and useful. + + +Document your change +-------------------- + +When sending in your patches, pay special attention to what you say in +the text in your email. This information will become the ChangeLog +information for the patch, and will be preserved for everyone to see for +all time. It should describe the patch completely, containing: + - why the change is necessary + - the overall design approach in the patch + - implementation details + - testing results + +For more details on what this should all look like, please see the +ChangeLog section of the document: + "The Perfect Patch" + http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt + + + + +All of these things are sometimes very hard to do. It can take years to +perfect these practices (if at all). It's a continuous process of +improvement that requires a lot of patience and determination. But +don't give up, it's possible. Many have done it before, and each had to +start exactly where you are now. + + + + +---------- +Thanks to Paolo Ciarrocchi who allowed the "Development Process" section +to be based on text he had written, and to Randy Dunlap and Gerrit +Huizenga for some of the list of things you should and should not say. +Also thanks to Pat Mochel, Hanna Linder, Randy Dunlap, Kay Sievers, +Vojtech Pavlik, Jan Kara, Josh Boyer, Kees Cook, Andrew Morton, Andi +Kleen, Vadim Lobanov, Jesper Juhl, Adrian Bunk, Keri Harris, Frans Pop, +David A. Wheeler, Junio Hamano, Michael Kerrisk, and Alex Shepard for +their review, comments, and contributions. Without their help, this +document would not have been possible. + + + +Maintainer: Greg Kroah-Hartman From 8907e94be2661be940c622232d6ce5ae938f10c3 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 18 Nov 2005 09:31:15 -0800 Subject: [PATCH 35/35] [PATCH] update Documentation/00-INDEX Update the index file with descriptions of the stable_api_nonsense.txt and stable_kernel_rules.txt files. Signed-off-by: Greg Kroah-Hartman Signed-off-by: Linus Torvalds --- Documentation/00-INDEX | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX index 2903337d564f..5f7f7d7f77d2 100644 --- a/Documentation/00-INDEX +++ b/Documentation/00-INDEX @@ -258,6 +258,10 @@ specialix.txt - info on hardware/driver for specialix IO8+ multiport serial card. spinlocks.txt - info on using spinlocks to provide exclusive access in kernel. +stable_api_nonsense.txt + - info on why the kernel does not have a stable in-kernel api or abi. +stable_kernel_rules.txt + - rules and procedures for the -stable kernel releases. stallion.txt - info on using the Stallion multiport serial driver. svga.txt