ARM: dts: qcom: msm8974: Add OnePlus One
OnePlus One is a smartphone launched in 2014 and is based on the Snapdragon 801 SoC (-AC variant). Supported features: * ADSP * Charger * Coincell charger * Fuel gauge * Internal storage * Touchscreen * UART * USB * Wifi/Bluetooth Signed-off-by: Julian Goldsmith <julian@juliangoldsmith.com> Co-developed-by: Oleg Chernovskiy <kanedias@keemail.me> Signed-off-by: Oleg Chernovskiy <kanedias@keemail.me> Co-developed-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221128172531.828660-2-luca@z3ntu.xyz
This commit is contained in:
Julian Goldsmith
Bjorn Andersson
parent
c8f740af51
commit
378f023133
@ -1061,6 +1061,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
|
||||
qcom-msm8974-sony-xperia-rhine-amami.dtb \
|
||||
qcom-msm8974-sony-xperia-rhine-honami.dtb \
|
||||
qcom-msm8974pro-fairphone-fp2.dtb \
|
||||
qcom-msm8974pro-oneplus-bacon.dtb \
|
||||
qcom-msm8974pro-samsung-klte.dtb \
|
||||
qcom-msm8974pro-sony-xperia-shinano-castor.dtb \
|
||||
qcom-mdm9615-wp8548-mangoh-green.dtb \
|
||||
|
||||
417
arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
Normal file
417
arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
Normal file
@ -0,0 +1,417 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
#include "qcom-msm8974pro.dtsi"
|
||||
#include "qcom-pm8841.dtsi"
|
||||
#include "qcom-pm8941.dtsi"
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
|
||||
|
||||
/ {
|
||||
model = "OnePlus One";
|
||||
compatible = "oneplus,bacon", "qcom,msm8974pro", "qcom,msm8974";
|
||||
chassis-type = "handset";
|
||||
qcom,msm-id = <194 0x10000>;
|
||||
qcom,board-id = <8 0>;
|
||||
|
||||
aliases {
|
||||
serial0 = &blsp1_uart2;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
};
|
||||
|
||||
&blsp1_i2c1 {
|
||||
status = "okay";
|
||||
|
||||
fuel-gauge@55 {
|
||||
compatible = "ti,bq27541";
|
||||
reg = <0x55>;
|
||||
power-supplies = <&bq24196_charger>;
|
||||
};
|
||||
};
|
||||
|
||||
&blsp1_i2c2 {
|
||||
status = "okay";
|
||||
|
||||
rmi4-i2c-dev@20 {
|
||||
compatible = "syna,rmi4-i2c";
|
||||
reg = <0x20>;
|
||||
|
||||
syna,startup-delay-ms = <100>;
|
||||
|
||||
interrupts-extended = <&tlmm 61 IRQ_TYPE_EDGE_FALLING>;
|
||||
vdd-supply = <&pm8941_l22>;
|
||||
vio-supply = <&pm8941_lvs3>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&touch_default_state>;
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
rmi4-f01@1 {
|
||||
reg = <0x1>;
|
||||
syna,nosleep-mode = <1>;
|
||||
};
|
||||
|
||||
rmi4-f12@12 {
|
||||
reg = <0x12>;
|
||||
syna,sensor-type = <1>;
|
||||
/*
|
||||
* Touchscreen size is 2040x1080, y-values between
|
||||
* 1920-2040 are used for touchkey (menu, home & back).
|
||||
* For now clip it off so we don't get touch events
|
||||
* outside of the display area.
|
||||
*/
|
||||
syna,clip-y-high = <1920>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&blsp1_i2c6 {
|
||||
status = "okay";
|
||||
|
||||
bq24196_charger: charger@6b {
|
||||
compatible = "ti,bq24196";
|
||||
reg = <0x6b>;
|
||||
interrupts-extended = <&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
|
||||
omit-battery-class;
|
||||
};
|
||||
};
|
||||
|
||||
&blsp1_uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gcc {
|
||||
compatible = "qcom,gcc-msm8974pro-ac";
|
||||
};
|
||||
|
||||
&pm8941_coincell {
|
||||
qcom,rset-ohms = <800>;
|
||||
qcom,vset-millivolts = <3200>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pronto {
|
||||
vddmx-supply = <&pm8841_s1>;
|
||||
vddcx-supply = <&pm8841_s2>;
|
||||
vddpx-supply = <&pm8941_s3>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wcnss_pin_a>;
|
||||
|
||||
status = "okay";
|
||||
|
||||
iris {
|
||||
vddxo-supply = <&pm8941_l6>;
|
||||
vddrfa-supply = <&pm8941_l11>;
|
||||
vddpa-supply = <&pm8941_l19>;
|
||||
vdddig-supply = <&pm8941_s3>;
|
||||
};
|
||||
|
||||
smd-edge {
|
||||
qcom,remote-pid = <4>;
|
||||
label = "pronto";
|
||||
|
||||
wcnss {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&remoteproc_adsp {
|
||||
cx-supply = <&pm8841_s2>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rpm_requests {
|
||||
regulators-0 {
|
||||
compatible = "qcom,rpm-pm8841-regulators";
|
||||
|
||||
pm8841_s1: s1 {
|
||||
regulator-min-microvolt = <675000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
};
|
||||
|
||||
pm8841_s2: s2 {
|
||||
regulator-min-microvolt = <875000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
pm8841_s3: s3 {
|
||||
regulator-min-microvolt = <1050000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
};
|
||||
};
|
||||
|
||||
regulators-1 {
|
||||
compatible = "qcom,rpm-pm8941-regulators";
|
||||
|
||||
vdd_l1_l3-supply = <&pm8941_s1>;
|
||||
vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
|
||||
vdd_l4_l11-supply = <&pm8941_s1>;
|
||||
vdd_l5_l7-supply = <&pm8941_s2>;
|
||||
vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
|
||||
vdd_l8_l16_l18_l19-supply = <&vreg_vph_pwr>;
|
||||
vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
|
||||
vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
|
||||
vdd_l21-supply = <&vreg_boost>;
|
||||
|
||||
pm8941_s1: s1 {
|
||||
regulator-min-microvolt = <1300000>;
|
||||
regulator-max-microvolt = <1300000>;
|
||||
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
pm8941_s2: s2 {
|
||||
regulator-min-microvolt = <2150000>;
|
||||
regulator-max-microvolt = <2150000>;
|
||||
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
pm8941_s3: s3 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-system-load = <154000>;
|
||||
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-allow-set-load;
|
||||
};
|
||||
|
||||
pm8941_l1: l1 {
|
||||
regulator-min-microvolt = <1225000>;
|
||||
regulator-max-microvolt = <1225000>;
|
||||
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
pm8941_l2: l2 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
};
|
||||
|
||||
pm8941_l3: l3 {
|
||||
regulator-min-microvolt = <1225000>;
|
||||
regulator-max-microvolt = <1225000>;
|
||||
};
|
||||
|
||||
pm8941_l4: l4 {
|
||||
regulator-min-microvolt = <1225000>;
|
||||
regulator-max-microvolt = <1225000>;
|
||||
};
|
||||
|
||||
pm8941_l5: l5 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
pm8941_l6: l6 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
pm8941_l7: l7 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
pm8941_l8: l8 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
pm8941_l9: l9 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
};
|
||||
|
||||
pm8941_l10: l10 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
};
|
||||
|
||||
pm8941_l11: l11 {
|
||||
regulator-min-microvolt = <1225000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
};
|
||||
|
||||
pm8941_l12: l12 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-allow-set-load;
|
||||
};
|
||||
|
||||
pm8941_l13: l13 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
pm8941_l14: l14 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
pm8941_l15: l15 {
|
||||
regulator-min-microvolt = <2050000>;
|
||||
regulator-max-microvolt = <2050000>;
|
||||
};
|
||||
|
||||
pm8941_l16: l16 {
|
||||
regulator-min-microvolt = <2700000>;
|
||||
regulator-max-microvolt = <2700000>;
|
||||
};
|
||||
|
||||
pm8941_l17: l17 {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <2850000>;
|
||||
};
|
||||
|
||||
pm8941_l18: l18 {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <2850000>;
|
||||
};
|
||||
|
||||
pm8941_l19: l19 {
|
||||
regulator-min-microvolt = <2900000>;
|
||||
regulator-max-microvolt = <3350000>;
|
||||
};
|
||||
|
||||
pm8941_l20: l20 {
|
||||
regulator-min-microvolt = <2950000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
|
||||
regulator-system-load = <200000>;
|
||||
regulator-allow-set-load;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
pm8941_l21: l21 {
|
||||
regulator-min-microvolt = <2950000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
pm8941_l22: l22 {
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-allow-set-load;
|
||||
};
|
||||
|
||||
pm8941_l23: l23 {
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
};
|
||||
|
||||
pm8941_l24: l24 {
|
||||
regulator-min-microvolt = <3075000>;
|
||||
regulator-max-microvolt = <3075000>;
|
||||
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
pm8941_lvs3: lvs3 {};
|
||||
};
|
||||
};
|
||||
|
||||
&sdhc_1 {
|
||||
vmmc-supply = <&pm8941_l20>;
|
||||
vqmmc-supply = <&pm8941_s3>;
|
||||
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&sdc1_on>;
|
||||
pinctrl-1 = <&sdc1_off>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
sdc1_on: sdc1-on-state {
|
||||
clk-pins {
|
||||
pins = "sdc1_clk";
|
||||
drive-strength = <4>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
cmd-data-pins {
|
||||
pins = "sdc1_cmd", "sdc1_data";
|
||||
drive-strength = <4>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
touch_default_state: touch-default-state {
|
||||
int-pins {
|
||||
pins = "gpio61";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
input-enable;
|
||||
};
|
||||
|
||||
reset-pins {
|
||||
pins = "gpio60";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
wcnss_pin_a: wcnss-pin-active-state {
|
||||
wlan-pins {
|
||||
pins = "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
|
||||
function = "wlan";
|
||||
drive-strength = <6>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
bt-pins {
|
||||
pins = "gpio35", "gpio43", "gpio44";
|
||||
function = "bt";
|
||||
drive-strength = <2>;
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&usb {
|
||||
phys = <&usb_hs1_phy>;
|
||||
phy-select = <&tcsr 0xb000 0>;
|
||||
extcon = <&smbb>, <&usb_id>;
|
||||
vbus-supply = <&chg_otg>;
|
||||
|
||||
hnp-disable;
|
||||
srp-disable;
|
||||
adp-disable;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_hs1_phy {
|
||||
status = "okay";
|
||||
|
||||
v1p8-supply = <&pm8941_l6>;
|
||||
v3p3-supply = <&pm8941_l24>;
|
||||
|
||||
extcon = <&smbb>;
|
||||
qcom,init-seq = /bits/ 8 <0x1 0x64>;
|
||||
};
|
||||
Loading…
x
Reference in New Issue
Block a user