drm/probe-helpers: Drop locking from poll_enable

It was only needed to protect the connector_list walking, see

commit 8c4ccc4ab6
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Thu Jul 9 23:44:26 2015 +0200

    drm/probe-helper: Grab mode_config.mutex in poll_init/enable

Unfortunately the commit message of that patch fails to mention that
the new locking check was for the connector_list.

But that requirement disappeared in

commit c36a3254f7
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Thu Dec 15 16:58:43 2016 +0100

    drm: Convert all helpers to drm_connector_list_iter

and so we can drop this again.

This fixes a locking inversion on nouveau, where the rpm code needs to
re-enable. But in other places the rpm_get() calls are nested within
the big modeset locks.

While at it, also improve the kerneldoc for these two functions a
notch.

v2: Update the kerneldoc even more to explain that these functions
can't be called concurrently, or bad things happen (Chris).

Cc: Dave Airlie <airlied@gmail.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Lyude <lyude@redhat.com>
Reviewed-by: Lyude <lyude@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170111090117.5134-1-daniel.vetter@ffwll.ch

drivers/gpu/drm/drm_probe_helper.c

@@ -115,24 +115,27 @@ static int drm_helper_probe_add_cmdline_mode(struct drm_connector *connector)
 
 #define DRM_OUTPUT_POLL_PERIOD (10*HZ)
 /**
- * drm_kms_helper_poll_enable_locked - re-enable output polling.
+ * drm_kms_helper_poll_enable - re-enable output polling.
  * @dev: drm_device
  *
- * This function re-enables the output polling work without
+ * This function re-enables the output polling work, after it has been
- * locking the mode_config mutex.
+ * temporarily disabled using drm_kms_helper_poll_disable(), for example over
+ * suspend/resume.
  *
- * This is like drm_kms_helper_poll_enable() however it is to be
+ * Drivers can call this helper from their device resume implementation. It is
- * called from a context where the mode_config mutex is locked
+ * an error to call this when the output polling support has not yet been set
- * already.
+ * up.
+ *
+ * Note that calls to enable and disable polling must be strictly ordered, which
+ * is automatically the case when they're only call from suspend/resume
+ * callbacks.
  */
-void drm_kms_helper_poll_enable_locked(struct drm_device *dev)
+void drm_kms_helper_poll_enable(struct drm_device *dev)
 {
 	bool poll = false;
 	struct drm_connector *connector;
 	unsigned long delay = DRM_OUTPUT_POLL_PERIOD;
 
-	WARN_ON(!mutex_is_locked(&dev->mode_config.mutex));
-
 	if (!dev->mode_config.poll_enabled || !drm_kms_helper_poll)
 		return;
 
@@ -160,7 +163,7 @@ void drm_kms_helper_poll_enable_locked(struct drm_device *dev)
 	if (poll)
 		schedule_delayed_work(&dev->mode_config.output_poll_work, delay);
 }
-EXPORT_SYMBOL(drm_kms_helper_poll_enable_locked);
+EXPORT_SYMBOL(drm_kms_helper_poll_enable);
 
 static enum drm_connector_status
 drm_connector_detect(struct drm_connector *connector, bool force)
@@ -287,7 +290,7 @@ int drm_helper_probe_single_connector_modes(struct drm_connector *connector,
 
 	/* Re-enable polling in case the global poll config changed. */
 	if (drm_kms_helper_poll != dev->mode_config.poll_running)
-		drm_kms_helper_poll_enable_locked(dev);
+		drm_kms_helper_poll_enable(dev);
 
 	dev->mode_config.poll_running = drm_kms_helper_poll;
 
@@ -479,8 +482,12 @@ out:
  * This function disables the output polling work.
  *
  * Drivers can call this helper from their device suspend implementation. It is
- * not an error to call this even when output polling isn't enabled or arlready
+ * not an error to call this even when output polling isn't enabled or already
- * disabled.
+ * disabled. Polling is re-enabled by calling drm_kms_helper_poll_enable().
+ *
+ * Note that calls to enable and disable polling must be strictly ordered, which
+ * is automatically the case when they're only call from suspend/resume
+ * callbacks.
  */
 void drm_kms_helper_poll_disable(struct drm_device *dev)
 {
@@ -490,24 +497,6 @@ void drm_kms_helper_poll_disable(struct drm_device *dev)
 }
 EXPORT_SYMBOL(drm_kms_helper_poll_disable);
 
-/**
- * drm_kms_helper_poll_enable - re-enable output polling.
- * @dev: drm_device
- *
- * This function re-enables the output polling work.
- *
- * Drivers can call this helper from their device resume implementation. It is
- * an error to call this when the output polling support has not yet been set
- * up.
- */
-void drm_kms_helper_poll_enable(struct drm_device *dev)
-{
-	mutex_lock(&dev->mode_config.mutex);
-	drm_kms_helper_poll_enable_locked(dev);
-	mutex_unlock(&dev->mode_config.mutex);
-}
-EXPORT_SYMBOL(drm_kms_helper_poll_enable);
-
 /**
  * drm_kms_helper_poll_init - initialize and enable output polling
  * @dev: drm_device

drivers/gpu/drm/i915/intel_hotplug.c

@@ -180,7 +180,7 @@ static void intel_hpd_irq_storm_disable(struct drm_i915_private *dev_priv)
 
 	/* Enable polling and queue hotplug re-enabling. */
 	if (hpd_disabled) {
-		drm_kms_helper_poll_enable_locked(dev);
+		drm_kms_helper_poll_enable(dev);
 		mod_delayed_work(system_wq, &dev_priv->hotplug.reenable_work,
 				 msecs_to_jiffies(HPD_STORM_REENABLE_DELAY));
 	}
@@ -511,7 +511,7 @@ static void i915_hpd_poll_init_work(struct work_struct *work)
 	}
 
 	if (enabled)
-		drm_kms_helper_poll_enable_locked(dev);
+		drm_kms_helper_poll_enable(dev);
 
 	mutex_unlock(&dev->mode_config.mutex);
 

include/drm/drm_crtc_helper.h

@@ -73,6 +73,5 @@ extern void drm_kms_helper_hotplug_event(struct drm_device *dev);
 
 extern void drm_kms_helper_poll_disable(struct drm_device *dev);
 extern void drm_kms_helper_poll_enable(struct drm_device *dev);
-extern void drm_kms_helper_poll_enable_locked(struct drm_device *dev);
 
 #endif