mmc: sdhci: fix the timeout check window for clock and reset
commit b704441e38f645dcfba1348ca3cc1ba43d1a9f31 upstream. We observed some premature timeouts on a virtualization platform, the log is like this: case 1: [159525.255629] mmc1: Internal clock never stabilised. [159525.255818] mmc1: sdhci: ============ SDHCI REGISTER DUMP =========== [159525.256049] mmc1: sdhci: Sys addr: 0x00000000 | Version: 0x00001002 ... [159525.257205] mmc1: sdhci: Wake-up: 0x00000000 | Clock: 0x0000fa03 From the clock control register dump, we are pretty sure the clock was stablized. case 2: [ 914.550127] mmc1: Reset 0x2 never completed. [ 914.550321] mmc1: sdhci: ============ SDHCI REGISTER DUMP =========== [ 914.550608] mmc1: sdhci: Sys addr: 0x00000010 | Version: 0x00001002 After checking the sdhci code, we found the timeout check actually has a little window that the CPU can be scheduled out and when it comes back, the original time set or check is not valid. Fixes: 5a436cc0af62 ("mmc: sdhci: Optimize delay loops") Cc: stable@vger.kernel.org # v4.12+ Signed-off-by: Alek Du <alek.du@intel.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
parent
30d358d804
commit
38ef9c5a93
@ -193,8 +193,12 @@ void sdhci_reset(struct sdhci_host *host, u8 mask)
|
||||
timeout = ktime_add_ms(ktime_get(), 100);
|
||||
|
||||
/* hw clears the bit when it's done */
|
||||
while (sdhci_readb(host, SDHCI_SOFTWARE_RESET) & mask) {
|
||||
if (ktime_after(ktime_get(), timeout)) {
|
||||
while (1) {
|
||||
bool timedout = ktime_after(ktime_get(), timeout);
|
||||
|
||||
if (!(sdhci_readb(host, SDHCI_SOFTWARE_RESET) & mask))
|
||||
break;
|
||||
if (timedout) {
|
||||
pr_err("%s: Reset 0x%x never completed.\n",
|
||||
mmc_hostname(host->mmc), (int)mask);
|
||||
sdhci_dumpregs(host);
|
||||
@ -1417,9 +1421,13 @@ void sdhci_enable_clk(struct sdhci_host *host, u16 clk)
|
||||
|
||||
/* Wait max 20 ms */
|
||||
timeout = ktime_add_ms(ktime_get(), 20);
|
||||
while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
|
||||
& SDHCI_CLOCK_INT_STABLE)) {
|
||||
if (ktime_after(ktime_get(), timeout)) {
|
||||
while (1) {
|
||||
bool timedout = ktime_after(ktime_get(), timeout);
|
||||
|
||||
clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
|
||||
if (clk & SDHCI_CLOCK_INT_STABLE)
|
||||
break;
|
||||
if (timedout) {
|
||||
pr_err("%s: Internal clock never stabilised.\n",
|
||||
mmc_hostname(host->mmc));
|
||||
sdhci_dumpregs(host);
|
||||
|
Loading…
x
Reference in New Issue
Block a user