Merge branch 'x86/urgent' into x86/asm, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-18 09:28:03 +01:00 · 2016-02-18 09:28:03 +01:00 · 3a2f2ac9b9
commit 3a2f2ac9b9
parent 4e79e182b4 f4eafd8bcd
1010 changed files with 11172 additions and 58848 deletions
--- a/.mailmap
+++ b/.mailmap
@ -21,6 +21,7 @@ Andrey Ryabinin <ryabinin.a.a@gmail.com> <a.ryabinin@samsung.com>
 Andrew Morton <akpm@linux-foundation.org>
 Andrew Vasquez <andrew.vasquez@qlogic.com>
 Andy Adamson <andros@citi.umich.edu>
+Antonio Ospite <ao2@ao2.it> <ao2@amarulasolutions.com>
 Archit Taneja <archit@ti.com>
 Arnaud Patard <arnaud.patard@rtp-net.org>
 Arnd Bergmann <arnd@arndb.de>
--- a/Documentation/Intel-IOMMU.txt
+++ b/Documentation/Intel-IOMMU.txt
@ -3,7 +3,7 @@ Linux IOMMU Support

 The architecture spec can be obtained from the below location.

-http://www.intel.com/technology/virtualization/
+http://www.intel.com/content/dam/www/public/us/en/documents/product-specifications/vt-directed-io-spec.pdf

 This guide gives a quick cheat sheet for some basic understanding.

--- a/Documentation/cgroup-v2.txt
+++ b/Documentation/cgroup-v2.txt
@ -7,7 +7,7 @@ This is the authoritative documentation on the design, interface and
 conventions of cgroup v2.  It describes all userland-visible aspects
 of cgroup including core and specific controller behaviors.  All
 future changes must be reflected in this document.  Documentation for
-v1 is available under Documentation/cgroup-legacy/.
+v1 is available under Documentation/cgroup-v1/.

 CONTENTS

@ -843,6 +843,10 @@ PAGE_SIZE multiple when read back.
 		Amount of memory used to cache filesystem data,
 		including tmpfs and shared memory.

+	  sock
+
+		Amount of memory used in network transmission buffers
+
 	  file_mapped

 		Amount of cached filesystem data mapped with mmap()
--- a/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt
+++ b/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt
@ -68,7 +68,7 @@ ethernet@f0b60000 {
 		phy1: ethernet-phy@1 {
 			max-speed = <1000>;
 			reg = <0x1>;
-			compatible = "brcm,28nm-gphy", "ethernet-phy-ieee802.3-c22";
+			compatible = "ethernet-phy-ieee802.3-c22";
 		};
 	};
 };
@ -115,7 +115,7 @@ ethernet@f0ba0000 {
 		phy0: ethernet-phy@0 {
 			max-speed = <1000>;
 			reg = <0x0>;
-			compatible = "brcm,bcm53125", "ethernet-phy-ieee802.3-c22";
+			compatible = "ethernet-phy-ieee802.3-c22";
 		};
 	};
 };
--- a/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt
+++ b/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt
@ -4,8 +4,6 @@ Required properties:
 - compatible: should be "hisilicon,hns-dsaf-v1" or "hisilicon,hns-dsaf-v2".
  "hisilicon,hns-dsaf-v1" is for hip05.
  "hisilicon,hns-dsaf-v2" is for Hi1610 and Hi1612.
- dsa-name: dsa fabric name who provide this interface.
-  should be "dsafX", X is the dsaf id.
 - mode: dsa fabric mode string. only support one of dsaf modes like these:
 		"2port-64vf",
 		"6port-16rss",
@ -26,9 +24,8 @@ Required properties:

 Example:

-dsa: dsa@c7000000 {
+dsaf0: dsa@c7000000 {
 	compatible = "hisilicon,hns-dsaf-v1";
-	dsa_name = "dsaf0";
 	mode = "6port-16rss";
 	interrupt-parent = <&mbigen_dsa>;
 	reg = <0x0 0xC0000000 0x0 0x420000
--- a/Documentation/devicetree/bindings/net/hisilicon-hns-nic.txt
+++ b/Documentation/devicetree/bindings/net/hisilicon-hns-nic.txt
@ -4,8 +4,9 @@ Required properties:
 - compatible: "hisilicon,hns-nic-v1" or "hisilicon,hns-nic-v2".
  "hisilicon,hns-nic-v1" is for hip05.
  "hisilicon,hns-nic-v2" is for Hi1610 and Hi1612.
- ae-name: accelerator name who provides this interface,
-  is simply a name referring to the name of name in the accelerator node.
+- ae-handle: accelerator engine handle for hns,
+  specifies a reference to the associating hardware driver node.
+  see Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt
 - port-id: is the index of port provided by DSAF (the accelerator). DSAF can
  connect to 8 PHYs. Port 0 to 1 are both used for adminstration purpose. They
  are called debug ports.
@ -41,7 +42,7 @@ Example:

 	ethernet@0{
 		compatible = "hisilicon,hns-nic-v1";
-		ae-name = "dsaf0";
+		ae-handle = <&dsaf0>;
 		port-id = <0>;
 		local-mac-address = [a2 14 e4 4b 56 76];
 	};
--- a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
+++ b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
@ -6,12 +6,17 @@ Required properties:
 - interrupts: interrupt for the device
 - phy: See ethernet.txt file in the same directory.
 - phy-mode: See ethernet.txt file in the same directory
- clocks: a pointer to the reference clock for this device.
+- clocks: List of clocks for this device. At least one clock is
+  mandatory for the core clock. If several clocks are given, then the
+  clock-names property must be used to identify them.

 Optional properties:
 - tx-csum-limit: maximum mtu supported by port that allow TX checksum.
  Value is presented in bytes. If not used, by default 1600B is set for
  "marvell,armada-370-neta" and 9800B for others.
+- clock-names: List of names corresponding to clocks property; shall be
+  "core" for core clock and "bus" for the optional bus clock.
+

 Example:

--- a/Documentation/devicetree/bindings/net/mdio-mux-gpio.txt
+++ b/Documentation/devicetree/bindings/net/mdio-mux-gpio.txt
@ -38,7 +38,6 @@ Example :

 			phy11: ethernet-phy@1 {
 				reg = <1>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,
@ -48,7 +47,6 @@ Example :
 			};
 			phy12: ethernet-phy@2 {
 				reg = <2>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,
@ -58,7 +56,6 @@ Example :
 			};
 			phy13: ethernet-phy@3 {
 				reg = <3>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,
@ -68,7 +65,6 @@ Example :
 			};
 			phy14: ethernet-phy@4 {
 				reg = <4>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,
@ -85,7 +81,6 @@ Example :

 			phy21: ethernet-phy@1 {
 				reg = <1>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,
@ -95,7 +90,6 @@ Example :
 			};
 			phy22: ethernet-phy@2 {
 				reg = <2>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,
@ -105,7 +99,6 @@ Example :
 			};
 			phy23: ethernet-phy@3 {
 				reg = <3>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,
@ -115,7 +108,6 @@ Example :
 			};
 			phy24: ethernet-phy@4 {
 				reg = <4>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,
--- a/Documentation/devicetree/bindings/net/mdio-mux.txt
+++ b/Documentation/devicetree/bindings/net/mdio-mux.txt
@ -47,7 +47,6 @@ Example :

 			phy11: ethernet-phy@1 {
 				reg = <1>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,
@ -57,7 +56,6 @@ Example :
 			};
 			phy12: ethernet-phy@2 {
 				reg = <2>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,
@ -67,7 +65,6 @@ Example :
 			};
 			phy13: ethernet-phy@3 {
 				reg = <3>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,
@ -77,7 +74,6 @@ Example :
 			};
 			phy14: ethernet-phy@4 {
 				reg = <4>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,
@ -94,7 +90,6 @@ Example :

 			phy21: ethernet-phy@1 {
 				reg = <1>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,
@ -104,7 +99,6 @@ Example :
 			};
 			phy22: ethernet-phy@2 {
 				reg = <2>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,
@ -114,7 +108,6 @@ Example :
 			};
 			phy23: ethernet-phy@3 {
 				reg = <3>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,
@ -124,7 +117,6 @@ Example :
 			};
 			phy24: ethernet-phy@4 {
 				reg = <4>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,
--- a/Documentation/devicetree/bindings/net/phy.txt
+++ b/Documentation/devicetree/bindings/net/phy.txt
@ -17,8 +17,7 @@ Optional Properties:
  "ethernet-phy-ieee802.3-c22" or "ethernet-phy-ieee802.3-c45" for
  PHYs that implement IEEE802.3 clause 22 or IEEE802.3 clause 45
  specifications. If neither of these are specified, the default is to
-  assume clause 22. The compatible list may also contain other
-  elements.
+  assume clause 22.

  If the phy's identifier is known then the list may contain an entry
  of the form: "ethernet-phy-idAAAA.BBBB" where
@ -28,6 +27,9 @@ Optional Properties:
            4 hex digits. This is the chip vendor OUI bits 19:24,
            followed by 10 bits of a vendor specific ID.

+  The compatible list should not contain other values than those
+  listed here.
+
 - max-speed: Maximum PHY supported speed (10, 100, 1000...)

 - broken-turn-around: If set, indicates the PHY device does not correctly
--- a/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt
+++ b/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt
@ -8,6 +8,7 @@ OHCI and EHCI controllers.
 Required properties:
 - compatible: "renesas,pci-r8a7790" for the R8A7790 SoC;
 	      "renesas,pci-r8a7791" for the R8A7791 SoC;
+	      "renesas,pci-r8a7793" for the R8A7793 SoC;
 	      "renesas,pci-r8a7794" for the R8A7794 SoC;
 	      "renesas,pci-rcar-gen2" for a generic R-Car Gen2 compatible device

--- a/Documentation/devicetree/bindings/pci/rcar-pci.txt
+++ b/Documentation/devicetree/bindings/pci/rcar-pci.txt
@ -4,6 +4,7 @@ Required properties:
 compatible: "renesas,pcie-r8a7779" for the R8A7779 SoC;
 	    "renesas,pcie-r8a7790" for the R8A7790 SoC;
 	    "renesas,pcie-r8a7791" for the R8A7791 SoC;
+	    "renesas,pcie-r8a7793" for the R8A7793 SoC;
 	    "renesas,pcie-r8a7795" for the R8A7795 SoC;
 	    "renesas,pcie-rcar-gen2" for a generic R-Car Gen2 compatible device.

--- a/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt
+++ b/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt
@ -30,6 +30,8 @@ The compatible list for this generic sound card currently:
 "fsl,imx-audio-sgtl5000"
 (compatible with Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt)

+ "fsl,imx-audio-wm8960"
+
 Required properties:

  - compatible		: Contains one of entries in the compatible list.
--- a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
@ -1,8 +1,9 @@
 * Renesas R-Car Thermal

 Required properties:
- compatible		: "renesas,thermal-<soctype>", "renesas,rcar-thermal"
-			  as fallback.
+- compatible		: "renesas,thermal-<soctype>",
+			   "renesas,rcar-gen2-thermal" (with thermal-zone) or
+			   "renesas,rcar-thermal" (without thermal-zone) as fallback.
 			  Examples with soctypes are:
 			    - "renesas,thermal-r8a73a4" (R-Mobile APE6)
 			    - "renesas,thermal-r8a7779" (R-Car H1)
@ -36,3 +37,35 @@ thermal@e61f0000 {
 		0xe61f0300 0x38>;
 	interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
 };
+
+Example (with thermal-zone):
+
+thermal-zones {
+	cpu_thermal: cpu-thermal {
+		polling-delay-passive	= <1000>;
+		polling-delay		= <5000>;
+
+		thermal-sensors = <&thermal>;
+
+		trips {
+			cpu-crit {
+				temperature	= <115000>;
+				hysteresis	= <0>;
+				type		= "critical";
+			};
+		};
+		cooling-maps {
+		};
+	};
+};
+
+thermal: thermal@e61f0000 {
+	compatible =	"renesas,thermal-r8a7790",
+			"renesas,rcar-gen2-thermal",
+			"renesas,rcar-thermal";
+	reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
+	interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&mstp5_clks R8A7790_CLK_THERMAL>;
+	power-domains = <&cpg_clocks>;
+	#thermal-sensor-cells = <0>;
+};
--- a/Documentation/filesystems/efivarfs.txt
+++ b/Documentation/filesystems/efivarfs.txt
@ -14,3 +14,10 @@ filesystem.
 efivarfs is typically mounted like this,

 	mount -t efivarfs none /sys/firmware/efi/efivars
+
+Due to the presence of numerous firmware bugs where removing non-standard
+UEFI variables causes the system firmware to fail to POST, efivarfs
+files that are not well-known standardized variables are created
+as immutable files.  This doesn't prevent removal - "chattr -i" will work -
+but it does prevent this kind of failure from being accomplished
+accidentally.
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@ -240,8 +240,8 @@ Table 1-2: Contents of the status files (as of 4.1)
 RssFile                     size of resident file mappings
 RssShmem                    size of resident shmem memory (includes SysV shm,
                             mapping of tmpfs and shared anonymous mappings)
- VmData                      size of data, stack, and text segments
- VmStk                       size of data, stack, and text segments
+ VmData                      size of private data segments
+ VmStk                       size of stack segments
 VmExe                       size of text segment
 VmLib                       size of shared library code
 VmPTE                       size of page table entries
@ -356,7 +356,7 @@ address           perms offset  dev   inode      pathname
 a7cb1000-a7cb2000 ---p 00000000 00:00 0
 a7cb2000-a7eb2000 rw-p 00000000 00:00 0
 a7eb2000-a7eb3000 ---p 00000000 00:00 0
-a7eb3000-a7ed5000 rw-p 00000000 00:00 0          [stack:1001]
+a7eb3000-a7ed5000 rw-p 00000000 00:00 0
 a7ed5000-a8008000 r-xp 00000000 03:00 4222       /lib/libc.so.6
 a8008000-a800a000 r--p 00133000 03:00 4222       /lib/libc.so.6
 a800a000-a800b000 rw-p 00135000 03:00 4222       /lib/libc.so.6
@ -388,7 +388,6 @@ is not associated with a file:

 [heap]                   = the heap of the program
 [stack]                  = the stack of the main process
- [stack:1001]             = the stack of the thread with tid 1001
 [vdso]                   = the "virtual dynamic shared object",
                            the kernel system call handler

@ -396,10 +395,8 @@ is not associated with a file:

 The /proc/PID/task/TID/maps is a view of the virtual memory from the viewpoint
 of the individual tasks of a process. In this file you will see a mapping marked
-as [stack] if that task sees it as a stack. This is a key difference from the
-content of /proc/PID/maps, where you will see all mappings that are being used
-as stack by all of those tasks. Hence, for the example above, the task-level
-map, i.e. /proc/PID/task/TID/maps for thread 1001 will look like this:
+as [stack] if that task sees it as a stack. Hence, for the example above, the
+task-level map, i.e. /proc/PID/task/TID/maps for thread 1001 will look like this:

 08048000-08049000 r-xp 00000000 03:00 8312       /opt/test
 08049000-0804a000 rw-p 00001000 03:00 8312       /opt/test
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@ -1496,6 +1496,11 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			could change it dynamically, usually by
 			/sys/module/printk/parameters/ignore_loglevel.

+	ignore_rlimit_data
+			Ignore RLIMIT_DATA setting for data mappings,
+			print warning at first misuse.  Can be changed via
+			/sys/module/kernel/parameters/ignore_rlimit_data.
+
 	ihash_entries=	[KNL]
 			Set number of hash buckets for inode cache.

@ -4230,6 +4235,17 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			The default value of this parameter is determined by
 			the config option CONFIG_WQ_POWER_EFFICIENT_DEFAULT.

+	workqueue.debug_force_rr_cpu
+			Workqueue used to implicitly guarantee that work
+			items queued without explicit CPU specified are put
+			on the local CPU.  This guarantee is no longer true
+			and while local CPU is still preferred work items
+			may be put on foreign CPUs.  This debug option
+			forces round-robin CPU selection to flush out
+			usages which depend on the now broken guarantee.
+			When enabled, memory and cache locality will be
+			impacted.
+
 	x2apic_phys	[X86-64,APIC] Use x2apic physical mode instead of
 			default x2apic cluster mode on platforms
 			supporting x2apic.
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@ -594,7 +594,7 @@ tcp_fastopen - INTEGER

 tcp_syn_retries - INTEGER
 	Number of times initial SYNs for an active TCP connection attempt
-	will be retransmitted. Should not be higher than 255. Default value
+	will be retransmitted. Should not be higher than 127. Default value
 	is 6, which corresponds to 63seconds till the last retransmission
 	with the current initial RTO of 1second. With this the final timeout
 	for an active TCP connection attempt will happen after 127seconds.
--- a/Documentation/timers/hpet.txt
+++ b/Documentation/timers/hpet.txt
@ -1,9 +1,7 @@
 		High Precision Event Timer Driver for Linux

 The High Precision Event Timer (HPET) hardware follows a specification
-by Intel and Microsoft which can be found at
-
-	http://www.intel.com/hardwaredesign/hpetspec_1.pdf
+by Intel and Microsoft, revision 1.

 Each HPET has one fixed-rate counter (at 10+ MHz, hence "High Precision")
 and up to 32 comparators.  Normally three or more comparators are provided,
--- a/Documentation/virtual/kvm/api.txt
+++ b/Documentation/virtual/kvm/api.txt
@ -3025,7 +3025,7 @@ len must be a multiple of sizeof(struct kvm_s390_irq). It must be > 0
 and it must not exceed (max_vcpus + 32) * sizeof(struct kvm_s390_irq),
 which is the maximum number of possibly pending cpu-local interrupts.

-4.90 KVM_SMI
+4.96 KVM_SMI

 Capability: KVM_CAP_X86_SMM
 Architectures: x86
--- a/79
+++ b/79
@ -223,9 +223,7 @@ F:	drivers/scsi/aacraid/

 ABI/API
 L:	linux-api@vger.kernel.org
-F:	Documentation/ABI/
 F:	include/linux/syscalls.h
-F:	include/uapi/
 F:	kernel/sys_ni.c

 ABIT UGURU 1,2 HARDWARE MONITOR DRIVER
@ -686,13 +684,6 @@ M:	Michael Hanselmann <linux-kernel@hansmi.ch>
 S:	Supported
 F:	drivers/macintosh/ams/

-AMSO1100 RNIC DRIVER
-M:	Tom Tucker <tom@opengridcomputing.com>
-M:	Steve Wise <swise@opengridcomputing.com>
-L:	linux-rdma@vger.kernel.org
-S:	Maintained
-F:	drivers/infiniband/hw/amso1100/
-
 ANALOG DEVICES INC AD9389B DRIVER
 M:	Hans Verkuil <hans.verkuil@cisco.com>
 L:	linux-media@vger.kernel.org
@ -967,6 +958,8 @@ M:	Rob Herring <robh@kernel.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-highbank/
+F:	arch/arm/boot/dts/highbank.dts
+F:	arch/arm/boot/dts/ecx-*.dts*

 ARM/CAVIUM NETWORKS CNS3XXX MACHINE SUPPORT
 M:	Krzysztof Halasa <khalasa@piap.pl>
@ -1042,6 +1035,7 @@ M:	Barry Song <baohua@kernel.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux.git
 S:	Maintained
+F:	arch/arm/boot/dts/prima2*
 F:	arch/arm/mach-prima2/
 F:	drivers/clk/sirf/
 F:	drivers/clocksource/timer-prima2.c
@ -1143,6 +1137,10 @@ W:	http://www.hisilicon.com
 S:	Supported
 T:	git git://github.com/hisilicon/linux-hisi.git
 F:	arch/arm/mach-hisi/
+F:	arch/arm/boot/dts/hi3*
+F:	arch/arm/boot/dts/hip*
+F:	arch/arm/boot/dts/hisi*
+F:	arch/arm64/boot/dts/hisilicon/

 ARM/HP JORNADA 7XX MACHINE SUPPORT
 M:	Kristoffer Ericson <kristoffer.ericson@gmail.com>
@ -1219,6 +1217,7 @@ M:	Santosh Shilimkar <ssantosh@kernel.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-keystone/
+F:	arch/arm/boot/dts/k2*
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone.git

 ARM/TEXAS INSTRUMENT KEYSTONE CLOCK FRAMEWORK
@ -1287,6 +1286,7 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-berlin/
 F:	arch/arm/boot/dts/berlin*
+F:	arch/arm64/boot/dts/marvell/berlin*


 ARM/Marvell Dove/MV78xx0/Orion SOC support
@ -1425,6 +1425,7 @@ S:	Maintained
 F:	arch/arm/boot/dts/qcom-*.dts
 F:	arch/arm/boot/dts/qcom-*.dtsi
 F:	arch/arm/mach-qcom/
+F:	arch/arm64/boot/dts/qcom/*
 F:	drivers/soc/qcom/
 F:	drivers/tty/serial/msm_serial.h
 F:	drivers/tty/serial/msm_serial.c
@ -1441,8 +1442,8 @@ S:	Maintained
 ARM/RENESAS ARM64 ARCHITECTURE
 M:	Simon Horman <horms@verge.net.au>
 M:	Magnus Damm <magnus.damm@gmail.com>
-L:	linux-sh@vger.kernel.org
-Q:	http://patchwork.kernel.org/project/linux-sh/list/
+L:	linux-renesas-soc@vger.kernel.org
+Q:	http://patchwork.kernel.org/project/linux-renesas-soc/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git next
 S:	Supported
 F:	arch/arm64/boot/dts/renesas/
@ -1484,6 +1485,8 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/boot/dts/s3c*
+F:	arch/arm/boot/dts/s5p*
+F:	arch/arm/boot/dts/samsung*
 F:	arch/arm/boot/dts/exynos*
 F:	arch/arm64/boot/dts/exynos/
 F:	arch/arm/plat-samsung/
@ -1563,6 +1566,7 @@ S:	Maintained
 F:	arch/arm/mach-socfpga/
 F:	arch/arm/boot/dts/socfpga*
 F:	arch/arm/configs/socfpga_defconfig
+F:	arch/arm64/boot/dts/altera/
 W:	http://www.rocketboards.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux.git

@ -1716,7 +1720,7 @@ M:	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/boot/dts/vexpress*
-F:	arch/arm64/boot/dts/arm/vexpress*
+F:	arch/arm64/boot/dts/arm/
 F:	arch/arm/mach-vexpress/
 F:	*/*/vexpress*
 F:	*/*/*/vexpress*
@ -2343,6 +2347,7 @@ F:	arch/arm/mach-bcm/
 F:	arch/arm/boot/dts/bcm113*
 F:	arch/arm/boot/dts/bcm216*
 F:	arch/arm/boot/dts/bcm281*
+F:	arch/arm64/boot/dts/broadcom/
 F:	arch/arm/configs/bcm_defconfig
 F:	drivers/mmc/host/sdhci-bcm-kona.c
 F:	drivers/clocksource/bcm_kona_timer.c
@ -2357,14 +2362,6 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rpi/linux-rpi.git
 S:	Maintained
 N:	bcm2835

-BROADCOM BCM33XX MIPS ARCHITECTURE
-M:	Kevin Cernekee <cernekee@gmail.com>
-L:	linux-mips@linux-mips.org
-S:	Maintained
-F:	arch/mips/bcm3384/*
-F:	arch/mips/include/asm/mach-bcm3384/*
-F:	arch/mips/kernel/*bmips*
-
 BROADCOM BCM47XX MIPS ARCHITECTURE
 M:	Hauke Mehrtens <hauke@hauke-m.de>
 M:	Rafał Miłecki <zajec5@gmail.com>
@ -3445,7 +3442,7 @@ S:	Maintained
 F:	drivers/usb/dwc2/

 DESIGNWARE USB3 DRD IP DRIVER
-M:	Felipe Balbi <balbi@ti.com>
+M:	Felipe Balbi <balbi@kernel.org>
 L:	linux-usb@vger.kernel.org
 L:	linux-omap@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
@ -4184,13 +4181,6 @@ W:	http://aeschi.ch.eu.org/efs/
 S:	Orphan
 F:	fs/efs/

-EHCA (IBM GX bus InfiniBand adapter) DRIVER
-M:	Hoang-Nam Nguyen <hnguyen@de.ibm.com>
-M:	Christoph Raisch <raisch@de.ibm.com>
-L:	linux-rdma@vger.kernel.org
-S:	Supported
-F:	drivers/infiniband/hw/ehca/
-
 EHEA (IBM pSeries eHEA 10Gb ethernet adapter) DRIVER
 M:	Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
 L:	netdev@vger.kernel.org
@ -5809,12 +5799,6 @@ M:	Juanjo Ciarlante <jjciarla@raiz.uncu.edu.ar>
 S:	Maintained
 F:	net/ipv4/netfilter/ipt_MASQUERADE.c

-IPATH DRIVER
-M:	Mike Marciniszyn <infinipath@intel.com>
-L:	linux-rdma@vger.kernel.org
-S:	Maintained
-F:	drivers/staging/rdma/ipath/
-
 IPMI SUBSYSTEM
 M:	Corey Minyard <minyard@acm.org>
 L:	openipmi-developer@lists.sourceforge.net (moderated for non-subscribers)
@ -7370,7 +7354,7 @@ F:	drivers/tty/isicom.c
 F:	include/linux/isicom.h

 MUSB MULTIPOINT HIGH SPEED DUAL-ROLE CONTROLLER
-M:	Felipe Balbi <balbi@ti.com>
+M:	Felipe Balbi <balbi@kernel.org>
 L:	linux-usb@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
 S:	Maintained
@ -7939,7 +7923,7 @@ F:	drivers/media/platform/omap3isp/
 F:	drivers/staging/media/omap4iss/

 OMAP USB SUPPORT
-M:	Felipe Balbi <balbi@ti.com>
+M:	Felipe Balbi <balbi@kernel.org>
 L:	linux-usb@vger.kernel.org
 L:	linux-omap@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
@ -8818,6 +8802,7 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 T:	git git://github.com/hzhuang1/linux.git
 T:	git git://github.com/rjarzmik/linux.git
 S:	Maintained
+F:	arch/arm/boot/dts/pxa*
 F:	arch/arm/mach-pxa/
 F:	drivers/dma/pxa*
 F:	drivers/pcmcia/pxa2xx*
@ -8847,6 +8832,7 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 T:	git git://github.com/hzhuang1/linux.git
 T:	git git://git.linaro.org/people/ycmiao/pxa-linux.git
 S:	Maintained
+F:	arch/arm/boot/dts/mmp*
 F:	arch/arm/mach-mmp/

 PXA MMCI DRIVER
@ -9793,10 +9779,11 @@ S:	Supported
 F:	drivers/scsi/be2iscsi/

 Emulex 10Gbps NIC BE2, BE3-R, Lancer, Skyhawk-R DRIVER
-M:	Sathya Perla <sathya.perla@avagotech.com>
-M:	Ajit Khaparde <ajit.khaparde@avagotech.com>
-M:	Padmanabh Ratnakar <padmanabh.ratnakar@avagotech.com>
-M:	Sriharsha Basavapatna <sriharsha.basavapatna@avagotech.com>
+M:	Sathya Perla <sathya.perla@broadcom.com>
+M:	Ajit Khaparde <ajit.khaparde@broadcom.com>
+M:	Padmanabh Ratnakar <padmanabh.ratnakar@broadcom.com>
+M:	Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
+M:	Somnath Kotur <somnath.kotur@broadcom.com>
 L:	netdev@vger.kernel.org
 W:	http://www.emulex.com
 S:	Supported
@ -10158,6 +10145,7 @@ S:	Supported
 F:	drivers/media/pci/solo6x10/

 SOFTWARE RAID (Multiple Disks) SUPPORT
+M:	Shaohua Li <shli@kernel.org>
 L:	linux-raid@vger.kernel.org
 T:	git git://neil.brown.name/md
 S:	Supported
@ -10173,7 +10161,7 @@ F:	drivers/net/ethernet/natsemi/sonic.*

 SONICS SILICON BACKPLANE DRIVER (SSB)
 M:	Michael Buesch <m@bues.ch>
-L:	netdev@vger.kernel.org
+L:	linux-wireless@vger.kernel.org
 S:	Maintained
 F:	drivers/ssb/
 F:	include/linux/ssb/
@ -10291,6 +10279,7 @@ L:	spear-devel@list.st.com
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.st.com/spear
 S:	Maintained
+F:	arch/arm/boot/dts/spear*
 F:	arch/arm/mach-spear/

 SPEAR CLOCK FRAMEWORK SUPPORT
@ -11318,7 +11307,7 @@ F:	Documentation/usb/ehci.txt
 F:	drivers/usb/host/ehci*

 USB GADGET/PERIPHERAL SUBSYSTEM
-M:	Felipe Balbi <balbi@ti.com>
+M:	Felipe Balbi <balbi@kernel.org>
 L:	linux-usb@vger.kernel.org
 W:	http://www.linux-usb.org/gadget
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
@ -11394,7 +11383,7 @@ S:	Maintained
 F:	drivers/net/usb/pegasus.*

 USB PHY LAYER
-M:	Felipe Balbi <balbi@ti.com>
+M:	Felipe Balbi <balbi@kernel.org>
 L:	linux-usb@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
 S:	Maintained
@ -12133,7 +12122,7 @@ F:	drivers/net/hamradio/*scc.c
 F:	drivers/net/hamradio/z8530.h

 ZBUD COMPRESSED PAGE ALLOCATOR
-M:	Seth Jennings <sjennings@variantweb.net>
+M:	Seth Jennings <sjenning@redhat.com>
 L:	linux-mm@kvack.org
 S:	Maintained
 F:	mm/zbud.c
@ -12188,7 +12177,7 @@ F:	include/linux/zsmalloc.h
 F:	Documentation/vm/zsmalloc.txt

 ZSWAP COMPRESSED SWAP CACHING
-M:	Seth Jennings <sjennings@variantweb.net>
+M:	Seth Jennings <sjenning@redhat.com>
 L:	linux-mm@kvack.org
 S:	Maintained
 F:	mm/zswap.c
--- a/2
+++ b/2
@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 5
 SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc4
 NAME = Blurry Fish Butt

 # *DOCUMENTATION*
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@ -338,6 +338,19 @@ config ARC_PAGE_SIZE_4K

 endchoice

+choice
+	prompt "MMU Super Page Size"
+	depends on ISA_ARCV2 && TRANSPARENT_HUGEPAGE
+	default ARC_HUGEPAGE_2M
+
+config ARC_HUGEPAGE_2M
+	bool "2MB"
+
+config ARC_HUGEPAGE_16M
+	bool "16MB"
+
+endchoice
+
 if ISA_ARCOMPACT

 config ARC_COMPACT_IRQ_LEVELS
@ -410,7 +423,7 @@ config ARC_HAS_RTC
 	default n
 	depends on !SMP

-config ARC_HAS_GRTC
+config ARC_HAS_GFRC
 	bool "SMP synchronized 64-bit cycle counter"
 	default y
 	depends on SMP
@ -566,6 +579,12 @@ endmenu
 endmenu	 # "ARC Architecture Configuration"

 source "mm/Kconfig"
+
+config FORCE_MAX_ZONEORDER
+	int "Maximum zone order"
+	default "12" if ARC_HUGEPAGE_16M
+	default "11"
+
 source "net/Kconfig"
 source "drivers/Kconfig"
 source "fs/Kconfig"
--- a/arch/arc/configs/vdk_hs38_smp_defconfig
+++ b/arch/arc/configs/vdk_hs38_smp_defconfig
@ -16,7 +16,7 @@ CONFIG_ARC_PLAT_AXS10X=y
 CONFIG_AXS103=y
 CONFIG_ISA_ARCV2=y
 CONFIG_SMP=y
-# CONFIG_ARC_HAS_GRTC is not set
+# CONFIG_ARC_HAS_GFRC is not set
 CONFIG_ARC_UBOOT_SUPPORT=y
 CONFIG_ARC_BUILTIN_DTB_NAME="vdk_hs38_smp"
 CONFIG_PREEMPT=y
--- a/arch/arc/include/asm/arcregs.h
+++ b/arch/arc/include/asm/arcregs.h
@ -349,14 +349,13 @@ struct cpuinfo_arc {
 	struct cpuinfo_arc_bpu bpu;
 	struct bcr_identity core;
 	struct bcr_isa isa;
-	struct bcr_timer timers;
 	unsigned int vec_base;
 	struct cpuinfo_arc_ccm iccm, dccm;
 	struct {
 		unsigned int swap:1, norm:1, minmax:1, barrel:1, crc:1, pad1:3,
 			     fpu_sp:1, fpu_dp:1, pad2:6,
 			     debug:1, ap:1, smart:1, rtt:1, pad3:4,
-			     pad4:8;
+			     timer0:1, timer1:1, rtc:1, gfrc:1, pad4:4;
 	} extn;
 	struct bcr_mpy extn_mpy;
 	struct bcr_extn_xymem extn_xymem;
--- a/arch/arc/include/asm/irqflags-arcv2.h
+++ b/arch/arc/include/asm/irqflags-arcv2.h
@ -30,8 +30,11 @@
 /* Was Intr taken in User Mode */
 #define AUX_IRQ_ACT_BIT_U	31

-/* 0 is highest level, but taken by FIRQs, if present in design */
-#define ARCV2_IRQ_DEF_PRIO		0
+/*
+ * User space should be interruptable even by lowest prio interrupt
+ * Safe even if actual interrupt priorities is fewer or even one
+ */
+#define ARCV2_IRQ_DEF_PRIO	15

 /* seed value for status register */
 #define ISA_INIT_STATUS_BITS	(STATUS_IE_MASK | STATUS_AD_MASK | \
--- a/arch/arc/include/asm/mcip.h
+++ b/arch/arc/include/asm/mcip.h
@ -39,8 +39,8 @@ struct mcip_cmd {
 #define CMD_DEBUG_SET_MASK		0x34
 #define CMD_DEBUG_SET_SELECT		0x36

-#define CMD_GRTC_READ_LO		0x42
-#define CMD_GRTC_READ_HI		0x43
+#define CMD_GFRC_READ_LO		0x42
+#define CMD_GFRC_READ_HI		0x43

 #define CMD_IDU_ENABLE			0x71
 #define CMD_IDU_DISABLE			0x72
--- a/arch/arc/include/asm/pgtable.h
+++ b/arch/arc/include/asm/pgtable.h
@ -179,37 +179,44 @@
 #define __S111  PAGE_U_X_W_R

 /****************************************************************
- * Page Table Lookup split
+ * 2 tier (PGD:PTE) software page walker
 *
- * We implement 2 tier paging and since this is all software, we are free
- * to customize the span of a PGD / PTE entry to suit us
- *
- *			32 bit virtual address
+ * [31]		    32 bit virtual address              [0]
 * -------------------------------------------------------
- * | BITS_FOR_PGD    |  BITS_FOR_PTE    |  BITS_IN_PAGE  |
+ * |               | <------------ PGDIR_SHIFT ----------> |
+ * |		   |					 |
+ * | BITS_FOR_PGD  |  BITS_FOR_PTE  | <-- PAGE_SHIFT --> |
 * -------------------------------------------------------
 *       |                  |                |
 *       |                  |                --> off in page frame
- *       |		    |
 *       |                  ---> index into Page Table
- *       |
 *       ----> index into Page Directory
+ *
+ * In a single page size configuration, only PAGE_SHIFT is fixed
+ * So both PGD and PTE sizing can be tweaked
+ *  e.g. 8K page (PAGE_SHIFT 13) can have
+ *  - PGDIR_SHIFT 21  -> 11:8:13 address split
+ *  - PGDIR_SHIFT 24  -> 8:11:13 address split
+ *
+ * If Super Page is configured, PGDIR_SHIFT becomes fixed too,
+ * so the sizing flexibility is gone.
 */

-#define BITS_IN_PAGE	PAGE_SHIFT
-
-/* Optimal Sizing of Pg Tbl - based on MMU page size */
-#if defined(CONFIG_ARC_PAGE_SIZE_8K)
-#define BITS_FOR_PTE	8		/* 11:8:13 */
-#elif defined(CONFIG_ARC_PAGE_SIZE_16K)
-#define BITS_FOR_PTE	8		/* 10:8:14 */
-#elif defined(CONFIG_ARC_PAGE_SIZE_4K)
-#define BITS_FOR_PTE	9		/* 11:9:12 */
+#if defined(CONFIG_ARC_HUGEPAGE_16M)
+#define PGDIR_SHIFT	24
+#elif defined(CONFIG_ARC_HUGEPAGE_2M)
+#define PGDIR_SHIFT	21
+#else
+/*
+ * Only Normal page support so "hackable" (see comment above)
+ * Default value provides 11:8:13 (8K), 11:9:12 (4K)
+ */
+#define PGDIR_SHIFT	21
 #endif

-#define BITS_FOR_PGD	(32 - BITS_FOR_PTE - BITS_IN_PAGE)
+#define BITS_FOR_PTE	(PGDIR_SHIFT - PAGE_SHIFT)
+#define BITS_FOR_PGD	(32 - PGDIR_SHIFT)

-#define PGDIR_SHIFT	(32 - BITS_FOR_PGD)
 #define PGDIR_SIZE	(1UL << PGDIR_SHIFT)	/* vaddr span, not PDG sz */
 #define PGDIR_MASK	(~(PGDIR_SIZE-1))

--- a/arch/arc/kernel/entry-arcv2.S
+++ b/arch/arc/kernel/entry-arcv2.S
@ -211,7 +211,11 @@ debug_marker_syscall:
 ; (since IRQ NOT allowed in DS in ARCv2, this can only happen if orig
 ; entry was via Exception in DS which got preempted in kernel).
 ;
-; IRQ RTIE won't reliably restore DE bit and/or BTA, needs handling
+; IRQ RTIE won't reliably restore DE bit and/or BTA, needs workaround
+;
+; Solution is return from Intr w/o any delay slot quirks into a kernel trampoline
+; and from pure kernel mode return to delay slot which handles DS bit/BTA correctly
+
 .Lintr_ret_to_delay_slot:
 debug_marker_ds:

@ -222,18 +226,23 @@ debug_marker_ds:
 	ld	r2, [sp, PT_ret]
 	ld	r3, [sp, PT_status32]

+	; STAT32 for Int return created from scratch
+	; (No delay dlot, disable Further intr in trampoline)
+
 	bic  	r0, r3, STATUS_U_MASK|STATUS_DE_MASK|STATUS_IE_MASK|STATUS_L_MASK
 	st	r0, [sp, PT_status32]

 	mov	r1, .Lintr_ret_to_delay_slot_2
 	st	r1, [sp, PT_ret]

+	; Orig exception PC/STAT32 safekept @orig_r0 and @event stack slots
 	st	r2, [sp, 0]
 	st	r3, [sp, 4]

 	b	.Lisr_ret_fast_path

 .Lintr_ret_to_delay_slot_2:
+	; Trampoline to restore orig exception PC/STAT32/BTA/AUX_USER_SP
 	sub	sp, sp, SZ_PT_REGS
 	st	r9, [sp, -4]

@ -243,11 +252,19 @@ debug_marker_ds:
 	ld	r9, [sp, 4]
 	sr	r9, [erstatus]

+	; restore AUX_USER_SP if returning to U mode
+	bbit0	r9, STATUS_U_BIT, 1f
+	ld	r9, [sp, PT_sp]
+	sr	r9, [AUX_USER_SP]
+
+1:
 	ld	r9, [sp, 8]
 	sr	r9, [erbta]

 	ld	r9, [sp, -4]
 	add	sp, sp, SZ_PT_REGS
+
+	; return from pure kernel mode to delay slot
 	rtie

 END(ret_from_exception)
--- a/arch/arc/kernel/intc-arcv2.c
+++ b/arch/arc/kernel/intc-arcv2.c
@ -14,6 +14,8 @@
 #include <linux/irqchip.h>
 #include <asm/irq.h>

+static int irq_prio;
+
 /*
 * Early Hardware specific Interrupt setup
 * -Called very early (start_kernel -> setup_arch -> setup_processor)
@ -24,6 +26,14 @@ void arc_init_IRQ(void)
 {
 	unsigned int tmp;

+	struct irq_build {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+		unsigned int pad:3, firq:1, prio:4, exts:8, irqs:8, ver:8;
+#else
+		unsigned int ver:8, irqs:8, exts:8, prio:4, firq:1, pad:3;
+#endif
+	} irq_bcr;
+
 	struct aux_irq_ctrl {
 #ifdef CONFIG_CPU_BIG_ENDIAN
 		unsigned int res3:18, save_idx_regs:1, res2:1,
@ -46,28 +56,25 @@ void arc_init_IRQ(void)

 	WRITE_AUX(AUX_IRQ_CTRL, ictrl);

-	/* setup status32, don't enable intr yet as kernel doesn't want */
-	tmp = read_aux_reg(0xa);
-	tmp |= ISA_INIT_STATUS_BITS;
-	tmp &= ~STATUS_IE_MASK;
-	asm volatile("flag %0	\n"::"r"(tmp));
-
 	/*
 	 * ARCv2 core intc provides multiple interrupt priorities (upto 16).
 	 * Typical builds though have only two levels (0-high, 1-low)
 	 * Linux by default uses lower prio 1 for most irqs, reserving 0 for
 	 * NMI style interrupts in future (say perf)
-	 *
-	 * Read the intc BCR to confirm that Linux default priority is avail
-	 * in h/w
-	 *
-	 * Note:
-	 *  IRQ_BCR[27..24] contains N-1 (for N priority levels) and prio level
-	 *  is 0 based.
 	 */
-	tmp = (read_aux_reg(ARC_REG_IRQ_BCR) >> 24 ) & 0xF;
-	if (ARCV2_IRQ_DEF_PRIO > tmp)
-		panic("Linux default irq prio incorrect\n");
+
+	READ_BCR(ARC_REG_IRQ_BCR, irq_bcr);
+
+	irq_prio = irq_bcr.prio;	/* Encoded as N-1 for N levels */
+	pr_info("archs-intc\t: %d priority levels (default %d)%s\n",
+		irq_prio + 1, irq_prio,
+		irq_bcr.firq ? " FIRQ (not used)":"");
+
+	/* setup status32, don't enable intr yet as kernel doesn't want */
+	tmp = read_aux_reg(0xa);
+	tmp |= STATUS_AD_MASK | (irq_prio << 1);
+	tmp &= ~STATUS_IE_MASK;
+	asm volatile("flag %0	\n"::"r"(tmp));
 }

 static void arcv2_irq_mask(struct irq_data *data)
@ -86,7 +93,7 @@ void arcv2_irq_enable(struct irq_data *data)
 {
 	/* set default priority */
 	write_aux_reg(AUX_IRQ_SELECT, data->irq);
-	write_aux_reg(AUX_IRQ_PRIORITY, ARCV2_IRQ_DEF_PRIO);
+	write_aux_reg(AUX_IRQ_PRIORITY, irq_prio);

 	/*
 	 * hw auto enables (linux unmask) all by default
--- a/arch/arc/kernel/mcip.c
+++ b/arch/arc/kernel/mcip.c
@ -96,13 +96,13 @@ static void mcip_probe_n_setup(void)
 #ifdef CONFIG_CPU_BIG_ENDIAN
 		unsigned int pad3:8,
 			     idu:1, llm:1, num_cores:6,
-			     iocoh:1,  grtc:1, dbg:1, pad2:1,
+			     iocoh:1,  gfrc:1, dbg:1, pad2:1,
 			     msg:1, sem:1, ipi:1, pad:1,
 			     ver:8;
 #else
 		unsigned int ver:8,
 			     pad:1, ipi:1, sem:1, msg:1,
-			     pad2:1, dbg:1, grtc:1, iocoh:1,
+			     pad2:1, dbg:1, gfrc:1, iocoh:1,
 			     num_cores:6, llm:1, idu:1,
 			     pad3:8;
 #endif
@ -116,7 +116,7 @@ static void mcip_probe_n_setup(void)
 		IS_AVAIL1(mp.ipi, "IPI "),
 		IS_AVAIL1(mp.idu, "IDU "),
 		IS_AVAIL1(mp.dbg, "DEBUG "),
-		IS_AVAIL1(mp.grtc, "GRTC"));
+		IS_AVAIL1(mp.gfrc, "GFRC"));

 	idu_detected = mp.idu;

@ -125,8 +125,8 @@ static void mcip_probe_n_setup(void)
 		__mcip_cmd_data(CMD_DEBUG_SET_MASK, 0xf, 0xf);
 	}

-	if (IS_ENABLED(CONFIG_ARC_HAS_GRTC) && !mp.grtc)
-		panic("kernel trying to use non-existent GRTC\n");
+	if (IS_ENABLED(CONFIG_ARC_HAS_GFRC) && !mp.gfrc)
+		panic("kernel trying to use non-existent GFRC\n");
 }

 struct plat_smp_ops plat_smp_ops = {
--- a/arch/arc/kernel/setup.c
+++ b/arch/arc/kernel/setup.c
@ -45,6 +45,7 @@ struct cpuinfo_arc cpuinfo_arc700[NR_CPUS];
 static void read_arc_build_cfg_regs(void)
 {
 	struct bcr_perip uncached_space;
+	struct bcr_timer timer;
 	struct bcr_generic bcr;
 	struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
 	unsigned long perip_space;
@ -53,7 +54,11 @@ static void read_arc_build_cfg_regs(void)
 	READ_BCR(AUX_IDENTITY, cpu->core);
 	READ_BCR(ARC_REG_ISA_CFG_BCR, cpu->isa);

-	READ_BCR(ARC_REG_TIMERS_BCR, cpu->timers);
+	READ_BCR(ARC_REG_TIMERS_BCR, timer);
+	cpu->extn.timer0 = timer.t0;
+	cpu->extn.timer1 = timer.t1;
+	cpu->extn.rtc = timer.rtc;
+
 	cpu->vec_base = read_aux_reg(AUX_INTR_VEC_BASE);

 	READ_BCR(ARC_REG_D_UNCACH_BCR, uncached_space);
@ -208,9 +213,9 @@ static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len)
 		       (unsigned int)(arc_get_core_freq() / 10000) % 100);

 	n += scnprintf(buf + n, len - n, "Timers\t\t: %s%s%s%s\nISA Extn\t: ",
-		       IS_AVAIL1(cpu->timers.t0, "Timer0 "),
-		       IS_AVAIL1(cpu->timers.t1, "Timer1 "),
-		       IS_AVAIL2(cpu->timers.rtc, "64-bit RTC ",
+		       IS_AVAIL1(cpu->extn.timer0, "Timer0 "),
+		       IS_AVAIL1(cpu->extn.timer1, "Timer1 "),
+		       IS_AVAIL2(cpu->extn.rtc, "Local-64-bit-Ctr ",
 				 CONFIG_ARC_HAS_RTC));

 	n += i = scnprintf(buf + n, len - n, "%s%s%s%s%s",
@ -293,13 +298,13 @@ static void arc_chk_core_config(void)
 	struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
 	int fpu_enabled;

-	if (!cpu->timers.t0)
+	if (!cpu->extn.timer0)
 		panic("Timer0 is not present!\n");

-	if (!cpu->timers.t1)
+	if (!cpu->extn.timer1)
 		panic("Timer1 is not present!\n");

-	if (IS_ENABLED(CONFIG_ARC_HAS_RTC) && !cpu->timers.rtc)
+	if (IS_ENABLED(CONFIG_ARC_HAS_RTC) && !cpu->extn.rtc)
 		panic("RTC is not present\n");

 #ifdef CONFIG_ARC_HAS_DCCM
@ -334,6 +339,7 @@ static void arc_chk_core_config(void)
 		panic("FPU non-existent, disable CONFIG_ARC_FPU_SAVE_RESTORE\n");

 	if (is_isa_arcv2() && IS_ENABLED(CONFIG_SMP) && cpu->isa.atomic &&
+	    IS_ENABLED(CONFIG_ARC_HAS_LLSC) &&
 	    !IS_ENABLED(CONFIG_ARC_STAR_9000923308))
 		panic("llock/scond livelock workaround missing\n");
 }
--- a/arch/arc/kernel/time.c
+++ b/arch/arc/kernel/time.c
@ -62,7 +62,7 @@

 /********** Clock Source Device *********/

-#ifdef CONFIG_ARC_HAS_GRTC
+#ifdef CONFIG_ARC_HAS_GFRC

 static int arc_counter_setup(void)
 {
@ -83,10 +83,10 @@ static cycle_t arc_counter_read(struct clocksource *cs)

 	local_irq_save(flags);

-	__mcip_cmd(CMD_GRTC_READ_LO, 0);
+	__mcip_cmd(CMD_GFRC_READ_LO, 0);
 	stamp.l = read_aux_reg(ARC_REG_MCIP_READBACK);

-	__mcip_cmd(CMD_GRTC_READ_HI, 0);
+	__mcip_cmd(CMD_GFRC_READ_HI, 0);
 	stamp.h = read_aux_reg(ARC_REG_MCIP_READBACK);

 	local_irq_restore(flags);
@ -95,7 +95,7 @@ static cycle_t arc_counter_read(struct clocksource *cs)
 }

 static struct clocksource arc_counter = {
-	.name   = "ARConnect GRTC",
+	.name   = "ARConnect GFRC",
 	.rating = 400,
 	.read   = arc_counter_read,
 	.mask   = CLOCKSOURCE_MASK(64),
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@ -106,6 +106,15 @@ ORIG_CFLAGS := $(KBUILD_CFLAGS)
 KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
 endif

+# -fstack-protector-strong triggers protection checks in this code,
+# but it is being used too early to link to meaningful stack_chk logic.
+nossp_flags := $(call cc-option, -fno-stack-protector)
+CFLAGS_atags_to_fdt.o := $(nossp_flags)
+CFLAGS_fdt.o := $(nossp_flags)
+CFLAGS_fdt_ro.o := $(nossp_flags)
+CFLAGS_fdt_rw.o := $(nossp_flags)
+CFLAGS_fdt_wip.o := $(nossp_flags)
+
 ccflags-y := -fpic -mno-single-pic-base -fno-builtin -I$(obj)
 asflags-y := -DZIMAGE

--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@ -439,6 +439,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <8>;
 			mbox_wkupm3: wkup_m3 {
+				ti,mbox-send-noirq;
 				ti,mbox-tx = <0 0 0>;
 				ti,mbox-rx = <0 0 3>;
 			};
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@ -73,7 +73,7 @@
 	global_timer: timer@48240200 {
 		compatible = "arm,cortex-a9-global-timer";
 		reg = <0x48240200 0x100>;
-		interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
 		interrupt-parent = <&gic>;
 		clocks = <&mpu_periphclk>;
 	};
@ -81,7 +81,7 @@
 	local_timer: timer@48240600 {
 		compatible = "arm,cortex-a9-twd-timer";
 		reg = <0x48240600 0x100>;
-		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_EDGE_RISING>;
 		interrupt-parent = <&gic>;
 		clocks = <&mpu_periphclk>;
 	};
@ -290,6 +290,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <8>;
 			mbox_wkupm3: wkup_m3 {
+				ti,mbox-send-noirq;
 				ti,mbox-tx = <0 0 0>;
 				ti,mbox-rx = <0 0 3>;
 			};
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@ -590,8 +590,6 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pixcir_ts_pins>;
 		reg = <0x5c>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <22 0>;

 		attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;

@ -599,7 +597,7 @@
 		 * 0x264 represents the offset of padconf register of
 		 * gpio3_22 from am43xx_pinmux base.
 		 */
-		interrupts-extended = <&gpio3 22 IRQ_TYPE_NONE>,
+		interrupts-extended = <&gpio3 22 IRQ_TYPE_EDGE_FALLING>,
 				      <&am43xx_pinmux 0x264>;
 		interrupt-names = "tsc", "wakeup";

--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@ -491,7 +491,7 @@
 		pinctrl-0 = <&pixcir_ts_pins>;
 		reg = <0x5c>;
 		interrupt-parent = <&gpio1>;
-		interrupts = <17 0>;
+		interrupts = <17 IRQ_TYPE_EDGE_FALLING>;

 		attb-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>;

--- a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
+++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
@ -167,7 +167,7 @@
 			DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */
 			DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */
 			DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */
-			DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT_PULLUP | MUX_MODE3)	/* vin2a_d23.rgmii1_rd0 */
+			DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */
 		>;
 	};

@ -492,14 +492,14 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&qspi1_pins>;

-	spi-max-frequency = <20000000>;
+	spi-max-frequency = <48000000>;

 	spi_flash: spi_flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "spansion,m25p80", "jedec,spi-nor";
 		reg = <0>;				/* CS0 */
-		spi-max-frequency = <20000000>;
+		spi-max-frequency = <48000000>;

 		partition@0 {
 			label = "uboot";
@ -559,13 +559,13 @@

 &cpsw_emac0 {
 	phy_id = <&davinci_mdio>, <0>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-txid";
 	dual_emac_res_vlan = <0>;
 };

 &cpsw_emac1 {
 	phy_id = <&davinci_mdio>, <1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-txid";
 	dual_emac_res_vlan = <1>;
 };

@ -588,7 +588,7 @@
 };

 &usb2 {
-	dr_mode = "peripheral";
+	dr_mode = "host";
 };

 &mcasp3 {
--- a/arch/arm/boot/dts/am57xx-sbc-am57x.dts
+++ b/arch/arm/boot/dts/am57xx-sbc-am57x.dts
@ -25,8 +25,8 @@
 &dra7_pmx_core {
 	uart3_pins_default: uart3_pins_default {
 		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_SLEW | MUX_MODE2)	/* uart2_ctsn.uart3_rxd */
-			DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_SLEW | MUX_MODE1)	/* uart2_rtsn.uart3_txd */
+			DRA7XX_CORE_IOPAD(0x3648, PIN_INPUT_SLEW | MUX_MODE0)	/* uart3_rxd */
+			DRA7XX_CORE_IOPAD(0x364c, PIN_INPUT_SLEW | MUX_MODE0)	/* uart3_txd */
 		>;
 	};

@ -108,9 +108,9 @@
 	pinctrl-0 = <&i2c5_pins_default>;
 	clock-frequency = <400000>;

-	eeprom_base: atmel@50 {
+	eeprom_base: atmel@54 {
 		compatible = "atmel,24c08";
-		reg = <0x50>;
+		reg = <0x54>;
 		pagesize = <16>;
 	};

--- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
+++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
@ -152,6 +152,7 @@
 				nand-on-flash-bbt;

 				partitions {
+					compatible = "fixed-partitions";
 					#address-cells = <1>;
 					#size-cells = <1>;

--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@ -114,9 +114,15 @@

 			macb0: ethernet@f8008000 {
 				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_macb0_default>;
+				pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>;
 				phy-mode = "rmii";
 				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					interrupt-parent = <&pioA>;
+					interrupts = <73 IRQ_TYPE_LEVEL_LOW>;
+				};
 			};

 			pdmic@f8018000 {
@ -300,6 +306,10 @@
 					bias-disable;
 				};

+				pinctrl_macb0_phy_irq: macb0_phy_irq {
+					pinmux = <PIN_PC9__GPIO>;
+				};
+
 				pinctrl_pdmic_default: pdmic_default {
 					pinmux = <PIN_PB26__PDMIC_DAT>,
 						<PIN_PB27__PDMIC_CLK>;
--- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
@ -86,10 +86,12 @@
 			macb0: ethernet@f8020000 {
 				phy-mode = "rmii";
 				status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;

 				phy0: ethernet-phy@1 {
 					interrupt-parent = <&pioE>;
-					interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+					interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
 					reg = <1>;
 				};
 			};
@ -152,6 +154,10 @@
 						atmel,pins =
 							<AT91_PIOE 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
 					};
+					pinctrl_macb0_phy_irq: macb0_phy_irq_0 {
+						atmel,pins =
+							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
 				};
 			};
 		};
--- a/arch/arm/boot/dts/at91-sama5d4ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d4ek.dts
@ -160,8 +160,15 @@
 			};

 			macb0: ethernet@f8020000 {
+				pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
 				phy-mode = "rmii";
 				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					interrupt-parent = <&pioE>;
+					interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+				};
 			};

 			mmc1: mmc@fc000000 {
@ -193,6 +200,10 @@

 			pinctrl@fc06a000 {
 				board {
+					pinctrl_macb0_phy_irq: macb0_phy_irq {
+						atmel,pins =
+							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
 					pinctrl_mmc0_cd: mmc0_cd {
 						atmel,pins =
 							<AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
--- a/arch/arm/boot/dts/at91sam9n12ek.dts
+++ b/arch/arm/boot/dts/at91sam9n12ek.dts
@ -215,7 +215,7 @@
 	};

 	panel: panel {
-		compatible = "qd,qd43003c0-40", "simple-panel";
+		compatible = "qiaodian,qd43003c0-40", "simple-panel";
 		backlight = <&backlight>;
 		power-supply = <&panel_reg>;
 		#address-cells = <1>;
--- a/arch/arm/boot/dts/kirkwood-lswvl.dts
+++ b/arch/arm/boot/dts/kirkwood-lswvl.dts
@ -1,7 +1,8 @@
 /*
 * Device Tree file for Buffalo Linkstation LS-WVL/VL
 *
- * Copyright (C) 2015, rogershimizu@gmail.com
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
@ -156,21 +157,21 @@
 		button@1 {
 			label = "Function Button";
 			linux,code = <KEY_OPTION>;
-			gpios = <&gpio0 45 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
 		};

 		button@2 {
 			label = "Power-on Switch";
 			linux,code = <KEY_RESERVED>;
 			linux,input-type = <5>;
-			gpios = <&gpio0 46 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 		};

 		button@3 {
 			label = "Power-auto Switch";
 			linux,code = <KEY_ESC>;
 			linux,input-type = <5>;
-			gpios = <&gpio0 47 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
 		};
 	};

@ -185,38 +186,38 @@

 		led@1 {
 			label = "lswvl:red:alarm";
-			gpios = <&gpio0 36 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
 		};

 		led@2 {
 			label = "lswvl:red:func";
-			gpios = <&gpio0 37 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
 		};

 		led@3 {
 			label = "lswvl:amber:info";
-			gpios = <&gpio0 38 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
 		};

 		led@4 {
 			label = "lswvl:blue:func";
-			gpios = <&gpio0 39 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 		};

 		led@5 {
 			label = "lswvl:blue:power";
-			gpios = <&gpio0 40 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
 		};

 		led@6 {
 			label = "lswvl:red:hdderr0";
-			gpios = <&gpio0 34 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
 		};

 		led@7 {
 			label = "lswvl:red:hdderr1";
-			gpios = <&gpio0 35 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
 		};
 	};

@ -233,7 +234,7 @@
 				3250 1
 				5000 0>;

-		alarm-gpios = <&gpio0 43 GPIO_ACTIVE_HIGH>;
+		alarm-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
 	};

 	restart_poweroff {
--- a/arch/arm/boot/dts/kirkwood-lswxl.dts
+++ b/arch/arm/boot/dts/kirkwood-lswxl.dts
@ -1,7 +1,8 @@
 /*
 * Device Tree file for Buffalo Linkstation LS-WXL/WSXL
 *
- * Copyright (C) 2015, rogershimizu@gmail.com
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
@ -156,21 +157,21 @@
 		button@1 {
 			label = "Function Button";
 			linux,code = <KEY_OPTION>;
-			gpios = <&gpio1 41 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
 		};

 		button@2 {
 			label = "Power-on Switch";
 			linux,code = <KEY_RESERVED>;
 			linux,input-type = <5>;
-			gpios = <&gpio1 42 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
 		};

 		button@3 {
 			label = "Power-auto Switch";
 			linux,code = <KEY_ESC>;
 			linux,input-type = <5>;
-			gpios = <&gpio1 43 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
 		};
 	};

@ -185,12 +186,12 @@

 		led@1 {
 			label = "lswxl:blue:func";
-			gpios = <&gpio1 36 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 		};

 		led@2 {
 			label = "lswxl:red:alarm";
-			gpios = <&gpio1 49 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
 		};

 		led@3 {
@ -200,23 +201,23 @@

 		led@4 {
 			label = "lswxl:blue:power";
-			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
 		};

 		led@5 {
 			label = "lswxl:red:func";
-			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
+			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
 		};

 		led@6 {
 			label = "lswxl:red:hdderr0";
-			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
 		};

 		led@7 {
 			label = "lswxl:red:hdderr1";
-			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
 		};
 	};

@ -225,15 +226,15 @@
 		pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
 		pinctrl-names = "default";

-		gpios = <&gpio0 47 GPIO_ACTIVE_LOW
-			 &gpio0 48 GPIO_ACTIVE_LOW>;
+		gpios = <&gpio1 16 GPIO_ACTIVE_LOW
+			 &gpio1 15 GPIO_ACTIVE_LOW>;

 		gpio-fan,speed-map = <0 3
 				1500 2
 				3250 1
 				5000 0>;

-		alarm-gpios = <&gpio1 49 GPIO_ACTIVE_HIGH>;
+		alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 	};

 	restart_poweroff {
@ -256,7 +257,7 @@
 			enable-active-high;
 			regulator-always-on;
 			regulator-boot-on;
-			gpio = <&gpio0 37 GPIO_ACTIVE_HIGH>;
+			gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
 		};
 		hdd_power0: regulator@2 {
 			compatible = "regulator-fixed";
--- a/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts
+++ b/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts
@ -131,6 +131,7 @@
 	chip-delay = <40>;
 	status = "okay";
 	partitions {
+		compatible = "fixed-partitions";
 		#address-cells = <1>;
 		#size-cells = <1>;

--- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
+++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
@ -112,14 +112,6 @@
 	clock-frequency = <400000>;
 };

-&i2c2 {
-	clock-frequency = <400000>;
-};
-
-&i2c3 {
-	clock-frequency = <400000>;
-};
-
 /*
 * Only found on the wireless SOM. For the SOM without wireless, the pins for
 * MMC3 can be routed with jumpers to the second MMC slot on the devkit and
@ -143,6 +135,7 @@
 		interrupt-parent = <&gpio5>;
 		interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; /* gpio 152 */
 		ref-clock-frequency = <26000000>;
+		tcxo-clock-frequency = <26000000>;
 	};
 };

--- a/arch/arm/boot/dts/omap5-board-common.dtsi
+++ b/arch/arm/boot/dts/omap5-board-common.dtsi
@ -130,6 +130,16 @@
 	};
 };

+&gpio8 {
+	/* TI trees use GPIO instead of msecure, see also muxing */
+	p234 {
+		gpio-hog;
+		gpios = <10 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "gpio8_234/msecure";
+	};
+};
+
 &omap5_pmx_core {
 	pinctrl-names = "default";
 	pinctrl-0 = <
@ -213,6 +223,13 @@
 		>;
 	};

+	/* TI trees use GPIO mode; msecure mode does not work reliably? */
+	palmas_msecure_pins: palmas_msecure_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x180, PIN_OUTPUT | MUX_MODE6) /* gpio8_234 */
+		>;
+	};
+
 	usbhost_pins: pinmux_usbhost_pins {
 		pinctrl-single,pins = <
 			OMAP5_IOPAD(0x0c4, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */
@ -278,6 +295,12 @@
 			&usbhost_wkup_pins
 	>;

+	palmas_sys_nirq_pins: pinmux_palmas_sys_nirq_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x068, PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq1 */
+		>;
+	};
+
 	usbhost_wkup_pins: pinmux_usbhost_wkup_pins {
 		pinctrl-single,pins = <
 			OMAP5_IOPAD(0x05a, PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */
@ -345,6 +368,8 @@
 		interrupt-controller;
 		#interrupt-cells = <2>;
 		ti,system-power-controller;
+		pinctrl-names = "default";
+		pinctrl-0 = <&palmas_sys_nirq_pins &palmas_msecure_pins>;

 		extcon_usb3: palmas_usb {
 			compatible = "ti,palmas-usb-vid";
@ -358,6 +383,14 @@
 			#clock-cells = <0>;
 		};

+		rtc {
+			compatible = "ti,palmas-rtc";
+			interrupt-parent = <&palmas>;
+			interrupts = <8 IRQ_TYPE_NONE>;
+			ti,backup-battery-chargeable;
+			ti,backup-battery-charge-high-current;
+		};
+
 		palmas_pmic {
 			compatible = "ti,palmas-pmic";
 			interrupt-parent = <&palmas>;
--- a/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts
+++ b/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts
@ -1,7 +1,8 @@
 /*
 * Device Tree file for Buffalo Linkstation LS-WTGL
 *
- * Copyright (C) 2015, Roger Shimizu <rogershimizu@gmail.com>
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
 *
 * This file is dual-licensed: you can use it either under the terms
 * of the GPL or the X11 license, at your option. Note that this dual
@ -69,8 +70,6 @@

 		internal-regs {
 			pinctrl: pinctrl@10000 {
-				pinctrl-0 = <&pmx_usb_power &pmx_power_hdd
-					&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
 				pinctrl-names = "default";

 				pmx_led_power: pmx-leds {
@ -162,6 +161,7 @@
 		led@1 {
 			label = "lswtgl:blue:power";
 			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
 		};

 		led@2 {
@ -188,7 +188,7 @@
 				3250 1
 				5000 0>;

-		alarm-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+		alarm-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
 	};

 	restart_poweroff {
--- a/arch/arm/boot/dts/sama5d4.dtsi
+++ b/arch/arm/boot/dts/sama5d4.dtsi
@ -1342,7 +1342,7 @@
 			dbgu: serial@fc069000 {
 				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xfc069000 0x200>;
-				interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>;
+				interrupts = <45 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
 				clocks = <&dbgu_clk>;
--- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
+++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
@ -127,22 +127,14 @@
 			};
 			mmcsd_default_mode: mmcsd_default {
 				mmcsd_default_cfg1 {
-					/* MCCLK */
-					pins = "GPIO8_B10";
-					ste,output = <0>;
-				};
-				mmcsd_default_cfg2 {
-					/* MCCMDDIR, MCDAT0DIR, MCDAT31DIR, MCDATDIR2 */
-					pins = "GPIO10_C11", "GPIO15_A12",
-					"GPIO16_C13", "GPIO23_D15";
-					ste,output = <1>;
-				};
-				mmcsd_default_cfg3 {
-					/* MCCMD, MCDAT3-0, MCMSFBCLK */
-					pins = "GPIO9_A10", "GPIO11_B11",
-					"GPIO12_A11", "GPIO13_C12",
-					"GPIO14_B12", "GPIO24_C15";
-					ste,input = <1>;
+					/*
+					 * MCCLK, MCCMDDIR, MCDAT0DIR, MCDAT31DIR, MCDATDIR2
+					 * MCCMD, MCDAT3-0, MCMSFBCLK
+					 */
+					pins = "GPIO8_B10", "GPIO9_A10", "GPIO10_C11", "GPIO11_B11",
+					       "GPIO12_A11", "GPIO13_C12", "GPIO14_B12", "GPIO15_A12",
+					       "GPIO16_C13", "GPIO23_D15", "GPIO24_C15";
+					ste,output = <2>;
 				};
 			};
 		};
@ -802,10 +794,21 @@
 			clock-names = "mclk", "apb_pclk";
 			interrupt-parent = <&vica>;
 			interrupts = <22>;
-			max-frequency = <48000000>;
+			max-frequency = <400000>;
 			bus-width = <4>;
 			cap-mmc-highspeed;
 			cap-sd-highspeed;
+			full-pwr-cycle;
+			/*
+			 * The STw4811 circuit used with the Nomadik strictly
+			 * requires that all of these signal direction pins be
+			 * routed and used for its 4-bit levelshifter.
+			 */
+			st,sig-dir-dat0;
+			st,sig-dir-dat2;
+			st,sig-dir-dat31;
+			st,sig-dir-cmd;
+			st,sig-pin-fbclk;
 			pinctrl-names = "default";
 			pinctrl-0 = <&mmcsd_default_mux>, <&mmcsd_default_mode>;
 			vmmc-supply = <&vmmc_regulator>;
--- a/arch/arm/common/icst.c
+++ b/arch/arm/common/icst.c
@ -16,7 +16,7 @@
 */
 #include <linux/module.h>
 #include <linux/kernel.h>
-
+#include <asm/div64.h>
 #include <asm/hardware/icst.h>

 /*
@ -29,7 +29,11 @@ EXPORT_SYMBOL(icst525_s2div);

 unsigned long icst_hz(const struct icst_params *p, struct icst_vco vco)
 {
-	return p->ref * 2 * (vco.v + 8) / ((vco.r + 2) * p->s2div[vco.s]);
+	u64 dividend = p->ref * 2 * (u64)(vco.v + 8);
+	u32 divisor = (vco.r + 2) * p->s2div[vco.s];
+
+	do_div(dividend, divisor);
+	return (unsigned long)dividend;
 }

 EXPORT_SYMBOL(icst_hz);
@ -58,6 +62,7 @@ icst_hz_to_vco(const struct icst_params *p, unsigned long freq)

 		if (f > p->vco_min && f <= p->vco_max)
 			break;
+		i++;
 	} while (i < 8);

 	if (i >= 8)
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@ -426,6 +426,7 @@ CONFIG_SUNXI_WATCHDOG=y
 CONFIG_IMX2_WDT=y
 CONFIG_TEGRA_WATCHDOG=m
 CONFIG_MESON_WATCHDOG=y
+CONFIG_DW_WATCHDOG=y
 CONFIG_DIGICOLOR_WATCHDOG=y
 CONFIG_MFD_AS3711=y
 CONFIG_MFD_AS3722=y
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@ -50,6 +50,7 @@ CONFIG_SOC_AM33XX=y
 CONFIG_SOC_AM43XX=y
 CONFIG_SOC_DRA7XX=y
 CONFIG_ARM_THUMBEE=y
+CONFIG_ARM_KERNMEM_PERMS=y
 CONFIG_ARM_ERRATA_411920=y
 CONFIG_ARM_ERRATA_430973=y
 CONFIG_SMP=y
@ -177,6 +178,7 @@ CONFIG_TI_CPTS=y
 CONFIG_AT803X_PHY=y
 CONFIG_SMSC_PHY=y
 CONFIG_USB_USBNET=m
+CONFIG_USB_NET_SMSC75XX=m
 CONFIG_USB_NET_SMSC95XX=m
 CONFIG_USB_ALI_M5632=y
 CONFIG_USB_AN2720=y
@ -290,24 +292,23 @@ CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
-CONFIG_OMAP2_DSS=m
-CONFIG_OMAP5_DSS_HDMI=y
-CONFIG_OMAP2_DSS_SDI=y
-CONFIG_OMAP2_DSS_DSI=y
+CONFIG_FB_OMAP5_DSS_HDMI=y
+CONFIG_FB_OMAP2_DSS_SDI=y
+CONFIG_FB_OMAP2_DSS_DSI=y
 CONFIG_FB_OMAP2=m
-CONFIG_DISPLAY_ENCODER_TFP410=m
-CONFIG_DISPLAY_ENCODER_TPD12S015=m
-CONFIG_DISPLAY_CONNECTOR_DVI=m
-CONFIG_DISPLAY_CONNECTOR_HDMI=m
-CONFIG_DISPLAY_CONNECTOR_ANALOG_TV=m
-CONFIG_DISPLAY_PANEL_DPI=m
-CONFIG_DISPLAY_PANEL_DSI_CM=m
-CONFIG_DISPLAY_PANEL_SONY_ACX565AKM=m
-CONFIG_DISPLAY_PANEL_LGPHILIPS_LB035Q02=m
-CONFIG_DISPLAY_PANEL_SHARP_LS037V7DW01=m
-CONFIG_DISPLAY_PANEL_TPO_TD028TTEC1=m
-CONFIG_DISPLAY_PANEL_TPO_TD043MTEA1=m
-CONFIG_DISPLAY_PANEL_NEC_NL8048HL11=m
+CONFIG_FB_OMAP2_ENCODER_TFP410=m
+CONFIG_FB_OMAP2_ENCODER_TPD12S015=m
+CONFIG_FB_OMAP2_CONNECTOR_DVI=m
+CONFIG_FB_OMAP2_CONNECTOR_HDMI=m
+CONFIG_FB_OMAP2_CONNECTOR_ANALOG_TV=m
+CONFIG_FB_OMAP2_PANEL_DPI=m
+CONFIG_FB_OMAP2_PANEL_DSI_CM=m
+CONFIG_FB_OMAP2_PANEL_SONY_ACX565AKM=m
+CONFIG_FB_OMAP2_PANEL_LGPHILIPS_LB035Q02=m
+CONFIG_FB_OMAP2_PANEL_SHARP_LS037V7DW01=m
+CONFIG_FB_OMAP2_PANEL_TPO_TD028TTEC1=m
+CONFIG_FB_OMAP2_PANEL_TPO_TD043MTEA1=m
+CONFIG_FB_OMAP2_PANEL_NEC_NL8048HL11=m
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_PLATFORM=y
@ -354,6 +355,11 @@ CONFIG_USB_MUSB_DSPS=m
 CONFIG_USB_INVENTRA_DMA=y
 CONFIG_USB_TI_CPPI41_DMA=y
 CONFIG_USB_DWC3=m
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_SIMPLE=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_PL2303=m
 CONFIG_USB_TEST=m
 CONFIG_AM335X_PHY_USB=y
 CONFIG_USB_GADGET=m
@ -387,6 +393,7 @@ CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=m
 CONFIG_LEDS_GPIO=m
 CONFIG_LEDS_PWM=m
+CONFIG_LEDS_PCA963X=m
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=m
 CONFIG_LEDS_TRIGGER_ONESHOT=m
@ -449,6 +456,8 @@ CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_SPLIT=y
+CONFIG_DEBUG_INFO_DWARF4=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_SCHEDSTATS=y
 CONFIG_TIMER_STATS=y
--- a/arch/arm/include/uapi/asm/unistd.h
+++ b/arch/arm/include/uapi/asm/unistd.h
@ -417,6 +417,7 @@
 #define __NR_userfaultfd		(__NR_SYSCALL_BASE+388)
 #define __NR_membarrier			(__NR_SYSCALL_BASE+389)
 #define __NR_mlock2			(__NR_SYSCALL_BASE+390)
+#define __NR_copy_file_range		(__NR_SYSCALL_BASE+391)

 /*
 * The following SWIs are ARM private.
--- a/arch/arm/kernel/calls.S
+++ b/arch/arm/kernel/calls.S
@ -400,6 +400,7 @@
 		CALL(sys_userfaultfd)
 		CALL(sys_membarrier)
 		CALL(sys_mlock2)
+		CALL(sys_copy_file_range)
 #ifndef syscalls_counted
 .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
 #define syscalls_counted
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@ -18,7 +18,6 @@
 #include <linux/slab.h>
 #include <linux/of.h>
 #include <linux/pinctrl/machine.h>
-#include <linux/platform_data/mailbox-omap.h>

 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
@ -66,32 +65,6 @@ static int __init omap3_l3_init(void)
 }
 omap_postcore_initcall(omap3_l3_init);

-#if defined(CONFIG_OMAP2PLUS_MBOX) || defined(CONFIG_OMAP2PLUS_MBOX_MODULE)
-static inline void __init omap_init_mbox(void)
-{
-	struct omap_hwmod *oh;
-	struct platform_device *pdev;
-	struct omap_mbox_pdata *pdata;
-
-	oh = omap_hwmod_lookup("mailbox");
-	if (!oh) {
-		pr_err("%s: unable to find hwmod\n", __func__);
-		return;
-	}
-	if (!oh->dev_attr) {
-		pr_err("%s: hwmod doesn't have valid attrs\n", __func__);
-		return;
-	}
-
-	pdata = (struct omap_mbox_pdata *)oh->dev_attr;
-	pdev = omap_device_build("omap-mailbox", -1, oh, pdata, sizeof(*pdata));
-	WARN(IS_ERR(pdev), "%s: could not build device, err %ld\n",
-						__func__, PTR_ERR(pdev));
-}
-#else
-static inline void omap_init_mbox(void) { }
-#endif /* CONFIG_OMAP2PLUS_MBOX */
-
 static inline void omap_init_sti(void) {}

 #if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE)
@ -229,7 +202,6 @@ static int __init omap2_init_devices(void)
 		 * please keep these calls, and their implementations above,
 		 * in alphabetical order so they're easier to sort through.
 		 */
-		omap_init_mbox();
 		omap_init_mcspi();
 		omap_init_sham();
 		omap_init_aes();
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@ -23,6 +23,8 @@
 #include <linux/platform_data/pinctrl-single.h>
 #include <linux/platform_data/iommu-omap.h>
 #include <linux/platform_data/wkup_m3.h>
+#include <linux/platform_data/pwm_omap_dmtimer.h>
+#include <plat/dmtimer.h>

 #include "common.h"
 #include "common-board-devices.h"
@ -449,6 +451,24 @@ void omap_auxdata_legacy_init(struct device *dev)
 	dev->platform_data = &twl_gpio_auxdata;
 }

+/* Dual mode timer PWM callbacks platdata */
+#if IS_ENABLED(CONFIG_OMAP_DM_TIMER)
+struct pwm_omap_dmtimer_pdata pwm_dmtimer_pdata = {
+	.request_by_node = omap_dm_timer_request_by_node,
+	.free = omap_dm_timer_free,
+	.enable = omap_dm_timer_enable,
+	.disable = omap_dm_timer_disable,
+	.get_fclk = omap_dm_timer_get_fclk,
+	.start = omap_dm_timer_start,
+	.stop = omap_dm_timer_stop,
+	.set_load = omap_dm_timer_set_load,
+	.set_match = omap_dm_timer_set_match,
+	.set_pwm = omap_dm_timer_set_pwm,
+	.set_prescaler = omap_dm_timer_set_prescaler,
+	.write_counter = omap_dm_timer_write_counter,
+};
+#endif
+
 /*
 * Few boards still need auxdata populated before we populate
 * the dev entries in of_platform_populate().
@ -502,6 +522,9 @@ static struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("ti,am4372-wkup-m3", 0x44d00000, "44d00000.wkup_m3",
 		       &wkup_m3_data),
 #endif
+#if IS_ENABLED(CONFIG_OMAP_DM_TIMER)
+	OF_DEV_AUXDATA("ti,omap-dmtimer-pwm", 0, NULL, &pwm_dmtimer_pdata),
+#endif
 #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
 	OF_DEV_AUXDATA("ti,omap4-iommu", 0x4a066000, "4a066000.mmu",
 		       &omap4_iommu_pdata),
--- a/arch/arm/mach-omap2/sleep34xx.S
+++ b/arch/arm/mach-omap2/sleep34xx.S
@ -86,13 +86,18 @@ ENTRY(enable_omap3630_toggle_l2_on_restore)
 	stmfd	sp!, {lr}	@ save registers on stack
 	/* Setup so that we will disable and enable l2 */
 	mov	r1, #0x1
-	adrl	r2, l2dis_3630	@ may be too distant for plain adr
-	str	r1, [r2]
+	adrl	r3, l2dis_3630_offset	@ may be too distant for plain adr
+	ldr	r2, [r3]		@ value for offset
+	str	r1, [r2, r3]		@ write to l2dis_3630
 	ldmfd	sp!, {pc}	@ restore regs and return
 ENDPROC(enable_omap3630_toggle_l2_on_restore)

-	.text
-/* Function to call rom code to save secure ram context */
+/*
+ * Function to call rom code to save secure ram context. This gets
+ * relocated to SRAM, so it can be all in .data section. Otherwise
+ * we need to initialize api_params separately.
+ */
+	.data
 	.align	3
 ENTRY(save_secure_ram_context)
 	stmfd	sp!, {r4 - r11, lr}	@ save registers on stack
@ -126,6 +131,8 @@ ENDPROC(save_secure_ram_context)
 ENTRY(save_secure_ram_context_sz)
 	.word	. - save_secure_ram_context

+	.text
+
 /*
 * ======================
 * == Idle entry point ==
@ -289,12 +296,6 @@ wait_sdrc_ready:
 	bic	r5, r5, #0x40
 	str	r5, [r4]

-/*
- * PC-relative stores lead to undefined behaviour in Thumb-2: use a r7 as a
- * base instead.
- * Be careful not to clobber r7 when maintaing this code.
- */
-
 is_dll_in_lock_mode:
 	/* Is dll in lock mode? */
 	ldr	r4, sdrc_dlla_ctrl
@ -302,11 +303,7 @@ is_dll_in_lock_mode:
 	tst	r5, #0x4
 	bne	exit_nonoff_modes	@ Return if locked
 	/* wait till dll locks */
-	adr	r7, kick_counter
 wait_dll_lock_timed:
-	ldr	r4, wait_dll_lock_counter
-	add	r4, r4, #1
-	str	r4, [r7, #wait_dll_lock_counter - kick_counter]
 	ldr	r4, sdrc_dlla_status
 	/* Wait 20uS for lock */
 	mov	r6, #8
@ -330,9 +327,6 @@ kick_dll:
 	orr	r6, r6, #(1<<3)		@ enable dll
 	str	r6, [r4]
 	dsb
-	ldr	r4, kick_counter
-	add	r4, r4, #1
-	str	r4, [r7]		@ kick_counter
 	b	wait_dll_lock_timed

 exit_nonoff_modes:
@ -360,15 +354,6 @@ sdrc_dlla_status:
 	.word	SDRC_DLLA_STATUS_V
 sdrc_dlla_ctrl:
 	.word	SDRC_DLLA_CTRL_V
-	/*
-	 * When exporting to userspace while the counters are in SRAM,
-	 * these 2 words need to be at the end to facilitate retrival!
-	 */
-kick_counter:
-	.word	0
-wait_dll_lock_counter:
-	.word	0
-
 ENTRY(omap3_do_wfi_sz)
 	.word	. - omap3_do_wfi

@ -437,7 +422,9 @@ ENTRY(omap3_restore)
 	cmp	r2, #0x0	@ Check if target power state was OFF or RET
 	bne	logic_l1_restore

-	ldr	r0, l2dis_3630
+	adr	r1, l2dis_3630_offset	@ address for offset
+	ldr	r0, [r1]		@ value for offset
+	ldr	r0, [r1, r0]		@ value at l2dis_3630
 	cmp	r0, #0x1	@ should we disable L2 on 3630?
 	bne	skipl2dis
 	mrc	p15, 0, r0, c1, c0, 1
@ -449,12 +436,14 @@ skipl2dis:
 	and	r1, #0x700
 	cmp	r1, #0x300
 	beq	l2_inv_gp
+	adr	r0, l2_inv_api_params_offset
+	ldr	r3, [r0]
+	add	r3, r3, r0		@ r3 points to dummy parameters
 	mov	r0, #40			@ set service ID for PPA
 	mov	r12, r0			@ copy secure Service ID in r12
 	mov	r1, #0			@ set task id for ROM code in r1
 	mov	r2, #4			@ set some flags in r2, r6
 	mov	r6, #0xff
-	adr	r3, l2_inv_api_params	@ r3 points to dummy parameters
 	dsb				@ data write barrier
 	dmb				@ data memory barrier
 	smc	#1			@ call SMI monitor (smi #1)
@ -488,8 +477,8 @@ skipl2dis:
 	b	logic_l1_restore

 	.align
-l2_inv_api_params:
-	.word	0x1, 0x00
+l2_inv_api_params_offset:
+	.long	l2_inv_api_params - .
 l2_inv_gp:
 	/* Execute smi to invalidate L2 cache */
 	mov r12, #0x1			@ set up to invalidate L2
@ -506,7 +495,9 @@ l2_inv_gp:
 	mov	r12, #0x2
 	smc	#0			@ Call SMI monitor (smieq)
 logic_l1_restore:
-	ldr	r1, l2dis_3630
+	adr	r0, l2dis_3630_offset	@ adress for offset
+	ldr	r1, [r0]		@ value for offset
+	ldr	r1, [r0, r1]		@ value at l2dis_3630
 	cmp	r1, #0x1		@ Test if L2 re-enable needed on 3630
 	bne	skipl2reen
 	mrc	p15, 0, r1, c1, c0, 1
@ -535,9 +526,17 @@ control_stat:
 	.word	CONTROL_STAT
 control_mem_rta:
 	.word	CONTROL_MEM_RTA_CTRL
+l2dis_3630_offset:
+	.long	l2dis_3630 - .
+
+	.data
 l2dis_3630:
 	.word	0

+	.data
+l2_inv_api_params:
+	.word	0x1, 0x00
+
 /*
 * Internal functions
 */
--- a/arch/arm/mach-omap2/sleep44xx.S
+++ b/arch/arm/mach-omap2/sleep44xx.S
@ -29,12 +29,6 @@
 	dsb
 .endm

-ppa_zero_params:
-	.word		0x0
-
-ppa_por_params:
-	.word		1, 0
-
 #ifdef CONFIG_ARCH_OMAP4

 /*
@ -266,7 +260,9 @@ ENTRY(omap4_cpu_resume)
 	beq	skip_ns_smp_enable
 ppa_actrl_retry:
 	mov     r0, #OMAP4_PPA_CPU_ACTRL_SMP_INDEX
-	adr	r3, ppa_zero_params		@ Pointer to parameters
+	adr	r1, ppa_zero_params_offset
+	ldr	r3, [r1]
+	add	r3, r3, r1			@ Pointer to ppa_zero_params
 	mov	r1, #0x0			@ Process ID
 	mov	r2, #0x4			@ Flag
 	mov	r6, #0xff
@ -303,7 +299,9 @@ skip_ns_smp_enable:
 	ldr     r0, =OMAP4_PPA_L2_POR_INDEX
 	ldr     r1, =OMAP44XX_SAR_RAM_BASE
 	ldr     r4, [r1, #L2X0_PREFETCH_CTRL_OFFSET]
-	adr     r3, ppa_por_params
+	adr     r1, ppa_por_params_offset
+	ldr	r3, [r1]
+	add	r3, r3, r1			@ Pointer to ppa_por_params
 	str     r4, [r3, #0x04]
 	mov	r1, #0x0			@ Process ID
 	mov	r2, #0x4			@ Flag
@ -328,6 +326,8 @@ skip_l2en:
 #endif

 	b	cpu_resume			@ Jump to generic resume
+ppa_por_params_offset:
+	.long	ppa_por_params - .
 ENDPROC(omap4_cpu_resume)
 #endif	/* CONFIG_ARCH_OMAP4 */

@ -380,4 +380,13 @@ ENTRY(omap_do_wfi)
 	nop

 	ldmfd	sp!, {pc}
+ppa_zero_params_offset:
+	.long	ppa_zero_params - .
 ENDPROC(omap_do_wfi)
+
+	.data
+ppa_zero_params:
+	.word		0
+
+ppa_por_params:
+	.word		1, 0
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@ -1,5 +1,6 @@
 menuconfig ARCH_REALVIEW
-	bool "ARM Ltd. RealView family" if ARCH_MULTI_V5 || ARCH_MULTI_V6 || ARCH_MULTI_V7
+	bool "ARM Ltd. RealView family"
+	depends on ARCH_MULTI_V5 || ARCH_MULTI_V6 || ARCH_MULTI_V7
 	select ARM_AMBA
 	select ARM_TIMER_SP804
 	select COMMON_CLK_VERSATILE
--- a/arch/arm/mach-realview/platsmp-dt.c
+++ b/arch/arm/mach-realview/platsmp-dt.c
@ -80,7 +80,7 @@ static void __init realview_smp_prepare_cpus(unsigned int max_cpus)
 		     virt_to_phys(versatile_secondary_startup));
 }

-struct smp_operations realview_dt_smp_ops __initdata = {
+static const struct smp_operations realview_dt_smp_ops __initconst = {
 	.smp_prepare_cpus	= realview_smp_prepare_cpus,
 	.smp_secondary_init	= versatile_secondary_init,
 	.smp_boot_secondary	= versatile_boot_secondary,
--- a/arch/arm/mach-tango/Kconfig
+++ b/arch/arm/mach-tango/Kconfig
@ -1,5 +1,6 @@
 config ARCH_TANGO
-	bool "Sigma Designs Tango4 (SMP87xx)" if ARCH_MULTI_V7
+	bool "Sigma Designs Tango4 (SMP87xx)"
+	depends on ARCH_MULTI_V7
 	# Cortex-A9 MPCore r3p0, PL310 r3p2
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARM_ERRATA_754322
--- a/arch/arm/mach-tango/platsmp.c
+++ b/arch/arm/mach-tango/platsmp.c
@ -9,7 +9,7 @@ static int tango_boot_secondary(unsigned int cpu, struct task_struct *idle)
 	return 0;
 }

-static struct smp_operations tango_smp_ops __initdata = {
+static const struct smp_operations tango_smp_ops __initconst = {
 	.smp_boot_secondary	= tango_boot_secondary,
 };

--- a/arch/arm64/Makefile
+++ b/arch/arm64/Makefile
@ -27,6 +27,8 @@ $(warning LSE atomics not supported by binutils)
 endif

 KBUILD_CFLAGS	+= -mgeneral-regs-only $(lseinstr)
+KBUILD_CFLAGS	+= -fno-asynchronous-unwind-tables
+KBUILD_CFLAGS	+= $(call cc-option, -mpc-relative-literal-loads)
 KBUILD_AFLAGS	+= $(lseinstr)

 ifeq ($(CONFIG_CPU_BIG_ENDIAN), y)
--- a/arch/arm64/boot/dts/arm/juno-base.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
@ -115,6 +115,7 @@
 			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
--- a/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi
@ -23,9 +23,8 @@ soc0: soc@000000000 {
 		};
 	};

-	dsa: dsa@c7000000 {
+	dsaf0: dsa@c7000000 {
 		compatible = "hisilicon,hns-dsaf-v1";
-		dsa_name = "dsaf0";
 		mode = "6port-16rss";
 		interrupt-parent = <&mbigen_dsa>;

@ -127,7 +126,7 @@ soc0: soc@000000000 {

 	eth0: ethernet@0{
 		compatible = "hisilicon,hns-nic-v1";
-		ae-name = "dsaf0";
+		ae-handle = <&dsaf0>;
 		port-id = <0>;
 		local-mac-address = [00 00 00 01 00 58];
 		status = "disabled";
@ -135,14 +134,14 @@ soc0: soc@000000000 {
 	};
 	eth1: ethernet@1{
 		compatible = "hisilicon,hns-nic-v1";
-		ae-name = "dsaf0";
+		ae-handle = <&dsaf0>;
 		port-id = <1>;
 		status = "disabled";
 		dma-coherent;
 	};
 	eth2: ethernet@2{
 		compatible = "hisilicon,hns-nic-v1";
-		ae-name = "dsaf0";
+		ae-handle = <&dsaf0>;
 		port-id = <2>;
 		local-mac-address = [00 00 00 01 00 5a];
 		status = "disabled";
@ -150,7 +149,7 @@ soc0: soc@000000000 {
 	};
 	eth3: ethernet@3{
 		compatible = "hisilicon,hns-nic-v1";
-		ae-name = "dsaf0";
+		ae-handle = <&dsaf0>;
 		port-id = <3>;
 		local-mac-address = [00 00 00 01 00 5b];
 		status = "disabled";
@ -158,7 +157,7 @@ soc0: soc@000000000 {
 	};
 	eth4: ethernet@4{
 		compatible = "hisilicon,hns-nic-v1";
-		ae-name = "dsaf0";
+		ae-handle = <&dsaf0>;
 		port-id = <4>;
 		local-mac-address = [00 00 00 01 00 5c];
 		status = "disabled";
@ -166,7 +165,7 @@ soc0: soc@000000000 {
 	};
 	eth5: ethernet@5{
 		compatible = "hisilicon,hns-nic-v1";
-		ae-name = "dsaf0";
+		ae-handle = <&dsaf0>;
 		port-id = <5>;
 		local-mac-address = [00 00 00 01 00 5d];
 		status = "disabled";
@ -174,7 +173,7 @@ soc0: soc@000000000 {
 	};
 	eth6: ethernet@6{
 		compatible = "hisilicon,hns-nic-v1";
-		ae-name = "dsaf0";
+		ae-handle = <&dsaf0>;
 		port-id = <6>;
 		local-mac-address = [00 00 00 01 00 5e];
 		status = "disabled";
@ -182,7 +181,7 @@ soc0: soc@000000000 {
 	};
 	eth7: ethernet@7{
 		compatible = "hisilicon,hns-nic-v1";
-		ae-name = "dsaf0";
+		ae-handle = <&dsaf0>;
 		port-id = <7>;
 		local-mac-address = [00 00 00 01 00 5f];
 		status = "disabled";
--- a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts
@ -12,6 +12,8 @@
 		rtc1 = "/rtc@0,7000e000";
 	};

+	chosen { };
+
 	memory {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x0 0x80000000>;
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@ -16,7 +16,6 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_MEMCG=y
 CONFIG_MEMCG_SWAP=y
-CONFIG_MEMCG_KMEM=y
 CONFIG_CGROUP_HUGETLB=y
 # CONFIG_UTS_NS is not set
 # CONFIG_IPC_NS is not set
@ -37,15 +36,13 @@ CONFIG_ARCH_EXYNOS7=y
 CONFIG_ARCH_LAYERSCAPE=y
 CONFIG_ARCH_HISI=y
 CONFIG_ARCH_MEDIATEK=y
+CONFIG_ARCH_QCOM=y
 CONFIG_ARCH_ROCKCHIP=y
 CONFIG_ARCH_SEATTLE=y
 CONFIG_ARCH_RENESAS=y
 CONFIG_ARCH_R8A7795=y
 CONFIG_ARCH_STRATIX10=y
 CONFIG_ARCH_TEGRA=y
-CONFIG_ARCH_TEGRA_132_SOC=y
-CONFIG_ARCH_TEGRA_210_SOC=y
-CONFIG_ARCH_QCOM=y
 CONFIG_ARCH_SPRD=y
 CONFIG_ARCH_THUNDER=y
 CONFIG_ARCH_UNIPHIER=y
@ -54,14 +51,19 @@ CONFIG_ARCH_XGENE=y
 CONFIG_ARCH_ZYNQMP=y
 CONFIG_PCI=y
 CONFIG_PCI_MSI=y
+CONFIG_PCI_IOV=y
+CONFIG_PCI_RCAR_GEN2_PCIE=y
 CONFIG_PCI_HOST_GENERIC=y
 CONFIG_PCI_XGENE=y
-CONFIG_SMP=y
+CONFIG_PCI_LAYERSCAPE=y
+CONFIG_PCI_HISI=y
+CONFIG_PCIE_QCOM=y
 CONFIG_SCHED_MC=y
 CONFIG_PREEMPT=y
 CONFIG_KSM=y
 CONFIG_TRANSPARENT_HUGEPAGE=y
 CONFIG_CMA=y
+CONFIG_XEN=y
 CONFIG_CMDLINE="console=ttyAMA0"
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_COMPAT=y
@ -100,7 +102,11 @@ CONFIG_PATA_OF_PLATFORM=y
 CONFIG_NETDEVICES=y
 CONFIG_TUN=y
 CONFIG_VIRTIO_NET=y
+CONFIG_AMD_XGBE=y
 CONFIG_NET_XGENE=y
+CONFIG_E1000E=y
+CONFIG_IGB=y
+CONFIG_IGBVF=y
 CONFIG_SKY2=y
 CONFIG_RAVB=y
 CONFIG_SMC91X=y
@ -117,25 +123,23 @@ CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_DW=y
 CONFIG_SERIAL_8250_MT6577=y
 CONFIG_SERIAL_8250_UNIPHIER=y
+CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_UARTS_4=y
-CONFIG_SERIAL_SAMSUNG_UARTS=4
 CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+CONFIG_SERIAL_TEGRA=y
 CONFIG_SERIAL_SH_SCI=y
 CONFIG_SERIAL_SH_SCI_NR_UARTS=11
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_TEGRA=y
 CONFIG_SERIAL_MSM=y
 CONFIG_SERIAL_MSM_CONSOLE=y
-CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_SERIAL_XILINX_PS_UART=y
 CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
 CONFIG_VIRTIO_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
 CONFIG_I2C_QUP=y
+CONFIG_I2C_UNIPHIER_F=y
 CONFIG_I2C_RCAR=y
 CONFIG_SPI=y
 CONFIG_SPI_PL022=y
@ -176,8 +180,6 @@ CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_TEGRA=y
 CONFIG_MMC_SPI=y
 CONFIG_MMC_DW=y
-CONFIG_MMC_DW_IDMAC=y
-CONFIG_MMC_DW_PLTFM=y
 CONFIG_MMC_DW_EXYNOS=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
@ -187,28 +189,33 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_LEDS_TRIGGER_CPU=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_EFI=y
+CONFIG_RTC_DRV_PL031=y
 CONFIG_RTC_DRV_XGENE=y
 CONFIG_DMADEVICES=y
-CONFIG_RCAR_DMAC=y
 CONFIG_QCOM_BAM_DMA=y
 CONFIG_TEGRA20_APB_DMA=y
+CONFIG_RCAR_DMAC=y
+CONFIG_VFIO=y
+CONFIG_VFIO_PCI=y
 CONFIG_VIRTIO_PCI=y
 CONFIG_VIRTIO_BALLOON=y
 CONFIG_VIRTIO_MMIO=y
+CONFIG_XEN_GNTDEV=y
+CONFIG_XEN_GRANT_DEV_ALLOC=y
 CONFIG_COMMON_CLK_CS2000_CP=y
 CONFIG_COMMON_CLK_QCOM=y
 CONFIG_MSM_GCC_8916=y
 CONFIG_HWSPINLOCK_QCOM=y
-# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_ARM_SMMU=y
 CONFIG_QCOM_SMEM=y
 CONFIG_QCOM_SMD=y
 CONFIG_QCOM_SMD_RPM=y
+CONFIG_ARCH_TEGRA_132_SOC=y
+CONFIG_ARCH_TEGRA_210_SOC=y
+CONFIG_HISILICON_IRQ_MBIGEN=y
 CONFIG_PHY_XGENE=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_EXT4_FS=y
 CONFIG_FANOTIFY=y
 CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
 CONFIG_QUOTA=y
@ -239,6 +246,7 @@ CONFIG_LOCKUP_DETECTOR=y
 # CONFIG_FTRACE is not set
 CONFIG_MEMTEST=y
 CONFIG_SECURITY=y
+CONFIG_CRYPTO_ECHAINIV=y
 CONFIG_CRYPTO_ANSI_CPRNG=y
 CONFIG_ARM64_CRYPTO=y
 CONFIG_CRYPTO_SHA1_ARM64_CE=y
--- a/arch/arm64/include/asm/arch_gicv3.h
+++ b/arch/arm64/include/asm/arch_gicv3.h
@ -103,6 +103,7 @@ static inline u64 gic_read_iar_common(void)
 	u64 irqstat;

 	asm volatile("mrs_s %0, " __stringify(ICC_IAR1_EL1) : "=r" (irqstat));
+	dsb(sy);
 	return irqstat;
 }

--- a/arch/arm64/include/asm/futex.h
+++ b/arch/arm64/include/asm/futex.h
@ -121,6 +121,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 		return -EFAULT;

 	asm volatile("// futex_atomic_cmpxchg_inatomic\n"
+ALTERNATIVE("nop", SET_PSTATE_PAN(0), ARM64_HAS_PAN, CONFIG_ARM64_PAN)
 "	prfm	pstl1strm, %2\n"
 "1:	ldxr	%w1, %2\n"
 "	sub	%w3, %w1, %w4\n"
@ -137,6 +138,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 "	.align	3\n"
 "	.quad	1b, 4b, 2b, 4b\n"
 "	.popsection\n"
+ALTERNATIVE("nop", SET_PSTATE_PAN(1), ARM64_HAS_PAN, CONFIG_ARM64_PAN)
 	: "+r" (ret), "=&r" (val), "+Q" (*uaddr), "=&r" (tmp)
 	: "r" (oldval), "r" (newval), "Ir" (-EFAULT)
 	: "memory");
--- a/arch/arm64/include/asm/kvm_arm.h
+++ b/arch/arm64/include/asm/kvm_arm.h
@ -182,6 +182,7 @@
 #define CPTR_EL2_TCPAC	(1 << 31)
 #define CPTR_EL2_TTA	(1 << 20)
 #define CPTR_EL2_TFP	(1 << CPTR_EL2_TFP_SHIFT)
+#define CPTR_EL2_DEFAULT	0x000033ff

 /* Hyp Debug Configuration Register bits */
 #define MDCR_EL2_TDRA		(1 << 11)
--- a/arch/arm64/include/asm/kvm_emulate.h
+++ b/arch/arm64/include/asm/kvm_emulate.h
@ -127,10 +127,14 @@ static inline unsigned long *vcpu_spsr(const struct kvm_vcpu *vcpu)

 static inline bool vcpu_mode_priv(const struct kvm_vcpu *vcpu)
 {
-	u32 mode = *vcpu_cpsr(vcpu) & PSR_MODE_MASK;
+	u32 mode;

-	if (vcpu_mode_is_32bit(vcpu))
+	if (vcpu_mode_is_32bit(vcpu)) {
+		mode = *vcpu_cpsr(vcpu) & COMPAT_PSR_MODE_MASK;
 		return mode > COMPAT_PSR_MODE_USR;
+	}
+
+	mode = *vcpu_cpsr(vcpu) & PSR_MODE_MASK;

 	return mode != PSR_MODE_EL0t;
 }
--- a/arch/arm64/include/asm/page.h
+++ b/arch/arm64/include/asm/page.h
@ -39,6 +39,7 @@

 #ifndef __ASSEMBLY__

+#include <linux/personality.h> /* for READ_IMPLIES_EXEC */
 #include <asm/pgtable-types.h>

 extern void __cpu_clear_user_page(void *p, unsigned long user);
--- a/arch/arm64/include/asm/pgtable.h
+++ b/arch/arm64/include/asm/pgtable.h
@ -67,11 +67,11 @@ extern void __pgd_error(const char *file, int line, unsigned long val);
 #define PROT_DEFAULT		(PTE_TYPE_PAGE | PTE_AF | PTE_SHARED)
 #define PROT_SECT_DEFAULT	(PMD_TYPE_SECT | PMD_SECT_AF | PMD_SECT_S)

-#define PROT_DEVICE_nGnRnE	(PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_ATTRINDX(MT_DEVICE_nGnRnE))
-#define PROT_DEVICE_nGnRE	(PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_ATTRINDX(MT_DEVICE_nGnRE))
-#define PROT_NORMAL_NC		(PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_ATTRINDX(MT_NORMAL_NC))
-#define PROT_NORMAL_WT		(PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_ATTRINDX(MT_NORMAL_WT))
-#define PROT_NORMAL		(PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_ATTRINDX(MT_NORMAL))
+#define PROT_DEVICE_nGnRnE	(PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_WRITE | PTE_ATTRINDX(MT_DEVICE_nGnRnE))
+#define PROT_DEVICE_nGnRE	(PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_WRITE | PTE_ATTRINDX(MT_DEVICE_nGnRE))
+#define PROT_NORMAL_NC		(PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_WRITE | PTE_ATTRINDX(MT_NORMAL_NC))
+#define PROT_NORMAL_WT		(PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_WRITE | PTE_ATTRINDX(MT_NORMAL_WT))
+#define PROT_NORMAL		(PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_WRITE | PTE_ATTRINDX(MT_NORMAL))

 #define PROT_SECT_DEVICE_nGnRE	(PROT_SECT_DEFAULT | PMD_SECT_PXN | PMD_SECT_UXN | PMD_ATTRINDX(MT_DEVICE_nGnRE))
 #define PROT_SECT_NORMAL	(PROT_SECT_DEFAULT | PMD_SECT_PXN | PMD_SECT_UXN | PMD_ATTRINDX(MT_NORMAL))
@ -81,7 +81,7 @@ extern void __pgd_error(const char *file, int line, unsigned long val);

 #define PAGE_KERNEL		__pgprot(_PAGE_DEFAULT | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_WRITE)
 #define PAGE_KERNEL_RO		__pgprot(_PAGE_DEFAULT | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_RDONLY)
-#define PAGE_KERNEL_ROX	__pgprot(_PAGE_DEFAULT | PTE_UXN | PTE_DIRTY | PTE_RDONLY)
+#define PAGE_KERNEL_ROX		__pgprot(_PAGE_DEFAULT | PTE_UXN | PTE_DIRTY | PTE_RDONLY)
 #define PAGE_KERNEL_EXEC	__pgprot(_PAGE_DEFAULT | PTE_UXN | PTE_DIRTY | PTE_WRITE)
 #define PAGE_KERNEL_EXEC_CONT	__pgprot(_PAGE_DEFAULT | PTE_UXN | PTE_DIRTY | PTE_WRITE | PTE_CONT)

@ -153,6 +153,7 @@ extern struct page *empty_zero_page;
 #define pte_write(pte)		(!!(pte_val(pte) & PTE_WRITE))
 #define pte_exec(pte)		(!(pte_val(pte) & PTE_UXN))
 #define pte_cont(pte)		(!!(pte_val(pte) & PTE_CONT))
+#define pte_user(pte)		(!!(pte_val(pte) & PTE_USER))

 #ifdef CONFIG_ARM64_HW_AFDBM
 #define pte_hw_dirty(pte)	(pte_write(pte) && !(pte_val(pte) & PTE_RDONLY))
@ -163,8 +164,6 @@ extern struct page *empty_zero_page;
 #define pte_dirty(pte)		(pte_sw_dirty(pte) || pte_hw_dirty(pte))

 #define pte_valid(pte)		(!!(pte_val(pte) & PTE_VALID))
-#define pte_valid_user(pte) \
-	((pte_val(pte) & (PTE_VALID | PTE_USER)) == (PTE_VALID | PTE_USER))
 #define pte_valid_not_user(pte) \
 	((pte_val(pte) & (PTE_VALID | PTE_USER)) == PTE_VALID)
 #define pte_valid_young(pte) \
@ -278,13 +277,13 @@ extern void __sync_icache_dcache(pte_t pteval, unsigned long addr);
 static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
 			      pte_t *ptep, pte_t pte)
 {
-	if (pte_valid_user(pte)) {
-		if (!pte_special(pte) && pte_exec(pte))
-			__sync_icache_dcache(pte, addr);
+	if (pte_valid(pte)) {
 		if (pte_sw_dirty(pte) && pte_write(pte))
 			pte_val(pte) &= ~PTE_RDONLY;
 		else
 			pte_val(pte) |= PTE_RDONLY;
+		if (pte_user(pte) && pte_exec(pte) && !pte_special(pte))
+			__sync_icache_dcache(pte, addr);
 	}

 	/*
--- a/arch/arm64/kernel/head.S
+++ b/arch/arm64/kernel/head.S
@ -514,9 +514,14 @@ CPU_LE(	movk	x0, #0x30d0, lsl #16	)	// Clear EE and E0E on LE systems
 #endif

 	/* EL2 debug */
+	mrs	x0, id_aa64dfr0_el1		// Check ID_AA64DFR0_EL1 PMUVer
+	sbfx	x0, x0, #8, #4
+	cmp	x0, #1
+	b.lt	4f				// Skip if no PMU present
 	mrs	x0, pmcr_el0			// Disable debug access traps
 	ubfx	x0, x0, #11, #5			// to EL2 and allow access to
 	msr	mdcr_el2, x0			// all PMU counters from EL1
+4:

 	/* Stage-2 translation */
 	msr	vttbr_el2, xzr
--- a/arch/arm64/kernel/image.h
+++ b/arch/arm64/kernel/image.h
@ -64,6 +64,16 @@

 #ifdef CONFIG_EFI

+/*
+ * Prevent the symbol aliases below from being emitted into the kallsyms
+ * table, by forcing them to be absolute symbols (which are conveniently
+ * ignored by scripts/kallsyms) rather than section relative symbols.
+ * The distinction is only relevant for partial linking, and only for symbols
+ * that are defined within a section declaration (which is not the case for
+ * the definitions below) so the resulting values will be identical.
+ */
+#define KALLSYMS_HIDE(sym)	ABSOLUTE(sym)
+
 /*
 * The EFI stub has its own symbol namespace prefixed by __efistub_, to
 * isolate it from the kernel proper. The following symbols are legally
@ -73,25 +83,25 @@
 * linked at. The routines below are all implemented in assembler in a
 * position independent manner
 */
-__efistub_memcmp		= __pi_memcmp;
-__efistub_memchr		= __pi_memchr;
-__efistub_memcpy		= __pi_memcpy;
-__efistub_memmove		= __pi_memmove;
-__efistub_memset		= __pi_memset;
-__efistub_strlen		= __pi_strlen;
-__efistub_strcmp		= __pi_strcmp;
-__efistub_strncmp		= __pi_strncmp;
-__efistub___flush_dcache_area	= __pi___flush_dcache_area;
+__efistub_memcmp		= KALLSYMS_HIDE(__pi_memcmp);
+__efistub_memchr		= KALLSYMS_HIDE(__pi_memchr);
+__efistub_memcpy		= KALLSYMS_HIDE(__pi_memcpy);
+__efistub_memmove		= KALLSYMS_HIDE(__pi_memmove);
+__efistub_memset		= KALLSYMS_HIDE(__pi_memset);
+__efistub_strlen		= KALLSYMS_HIDE(__pi_strlen);
+__efistub_strcmp		= KALLSYMS_HIDE(__pi_strcmp);
+__efistub_strncmp		= KALLSYMS_HIDE(__pi_strncmp);
+__efistub___flush_dcache_area	= KALLSYMS_HIDE(__pi___flush_dcache_area);

 #ifdef CONFIG_KASAN
-__efistub___memcpy		= __pi_memcpy;
-__efistub___memmove		= __pi_memmove;
-__efistub___memset		= __pi_memset;
+__efistub___memcpy		= KALLSYMS_HIDE(__pi_memcpy);
+__efistub___memmove		= KALLSYMS_HIDE(__pi_memmove);
+__efistub___memset		= KALLSYMS_HIDE(__pi_memset);
 #endif

-__efistub__text			= _text;
-__efistub__end			= _end;
-__efistub__edata		= _edata;
+__efistub__text			= KALLSYMS_HIDE(_text);
+__efistub__end			= KALLSYMS_HIDE(_end);
+__efistub__edata		= KALLSYMS_HIDE(_edata);

 #endif

--- a/arch/arm64/kvm/hyp/switch.c
+++ b/arch/arm64/kvm/hyp/switch.c
@ -36,7 +36,11 @@ static void __hyp_text __activate_traps(struct kvm_vcpu *vcpu)
 	write_sysreg(val, hcr_el2);
 	/* Trap on AArch32 cp15 c15 accesses (EL1 or EL0) */
 	write_sysreg(1 << 15, hstr_el2);
-	write_sysreg(CPTR_EL2_TTA | CPTR_EL2_TFP, cptr_el2);
+
+	val = CPTR_EL2_DEFAULT;
+	val |= CPTR_EL2_TTA | CPTR_EL2_TFP;
+	write_sysreg(val, cptr_el2);
+
 	write_sysreg(vcpu->arch.mdcr_el2, mdcr_el2);
 }

@ -45,7 +49,7 @@ static void __hyp_text __deactivate_traps(struct kvm_vcpu *vcpu)
 	write_sysreg(HCR_RW, hcr_el2);
 	write_sysreg(0, hstr_el2);
 	write_sysreg(read_sysreg(mdcr_el2) & MDCR_EL2_HPMN_MASK, mdcr_el2);
-	write_sysreg(0, cptr_el2);
+	write_sysreg(CPTR_EL2_DEFAULT, cptr_el2);
 }

 static void __hyp_text __activate_vm(struct kvm_vcpu *vcpu)
--- a/arch/arm64/kvm/inject_fault.c
+++ b/arch/arm64/kvm/inject_fault.c
@ -27,7 +27,11 @@

 #define PSTATE_FAULT_BITS_64 	(PSR_MODE_EL1h | PSR_A_BIT | PSR_F_BIT | \
 				 PSR_I_BIT | PSR_D_BIT)
-#define EL1_EXCEPT_SYNC_OFFSET	0x200
+
+#define CURRENT_EL_SP_EL0_VECTOR	0x0
+#define CURRENT_EL_SP_ELx_VECTOR	0x200
+#define LOWER_EL_AArch64_VECTOR		0x400
+#define LOWER_EL_AArch32_VECTOR		0x600

 static void prepare_fault32(struct kvm_vcpu *vcpu, u32 mode, u32 vect_offset)
 {
@ -97,6 +101,34 @@ static void inject_abt32(struct kvm_vcpu *vcpu, bool is_pabt,
 		*fsr = 0x14;
 }

+enum exception_type {
+	except_type_sync	= 0,
+	except_type_irq		= 0x80,
+	except_type_fiq		= 0x100,
+	except_type_serror	= 0x180,
+};
+
+static u64 get_except_vector(struct kvm_vcpu *vcpu, enum exception_type type)
+{
+	u64 exc_offset;
+
+	switch (*vcpu_cpsr(vcpu) & (PSR_MODE_MASK | PSR_MODE32_BIT)) {
+	case PSR_MODE_EL1t:
+		exc_offset = CURRENT_EL_SP_EL0_VECTOR;
+		break;
+	case PSR_MODE_EL1h:
+		exc_offset = CURRENT_EL_SP_ELx_VECTOR;
+		break;
+	case PSR_MODE_EL0t:
+		exc_offset = LOWER_EL_AArch64_VECTOR;
+		break;
+	default:
+		exc_offset = LOWER_EL_AArch32_VECTOR;
+	}
+
+	return vcpu_sys_reg(vcpu, VBAR_EL1) + exc_offset + type;
+}
+
 static void inject_abt64(struct kvm_vcpu *vcpu, bool is_iabt, unsigned long addr)
 {
 	unsigned long cpsr = *vcpu_cpsr(vcpu);
@ -108,8 +140,8 @@ static void inject_abt64(struct kvm_vcpu *vcpu, bool is_iabt, unsigned long addr
 	*vcpu_spsr(vcpu) = cpsr;
 	*vcpu_elr_el1(vcpu) = *vcpu_pc(vcpu);

+	*vcpu_pc(vcpu) = get_except_vector(vcpu, except_type_sync);
 	*vcpu_cpsr(vcpu) = PSTATE_FAULT_BITS_64;
-	*vcpu_pc(vcpu) = vcpu_sys_reg(vcpu, VBAR_EL1) + EL1_EXCEPT_SYNC_OFFSET;

 	vcpu_sys_reg(vcpu, FAR_EL1) = addr;

@ -143,8 +175,8 @@ static void inject_undef64(struct kvm_vcpu *vcpu)
 	*vcpu_spsr(vcpu) = cpsr;
 	*vcpu_elr_el1(vcpu) = *vcpu_pc(vcpu);

+	*vcpu_pc(vcpu) = get_except_vector(vcpu, except_type_sync);
 	*vcpu_cpsr(vcpu) = PSTATE_FAULT_BITS_64;
-	*vcpu_pc(vcpu) = vcpu_sys_reg(vcpu, VBAR_EL1) + EL1_EXCEPT_SYNC_OFFSET;

 	/*
 	 * Build an unknown exception, depending on the instruction
--- a/arch/arm64/kvm/sys_regs.c
+++ b/arch/arm64/kvm/sys_regs.c
@ -1007,10 +1007,9 @@ static int emulate_cp(struct kvm_vcpu *vcpu,
 		if (likely(r->access(vcpu, params, r))) {
 			/* Skip instruction, since it was emulated */
 			kvm_skip_instr(vcpu, kvm_vcpu_trap_il_is32bit(vcpu));
+			/* Handled */
+			return 0;
 		}
-
-		/* Handled */
-		return 0;
 	}

 	/* Not handled */
@ -1043,7 +1042,7 @@ static void unhandled_cp_access(struct kvm_vcpu *vcpu,
 }

 /**
- * kvm_handle_cp_64 -- handles a mrrc/mcrr trap on a guest CP15 access
+ * kvm_handle_cp_64 -- handles a mrrc/mcrr trap on a guest CP14/CP15 access
 * @vcpu: The VCPU pointer
 * @run:  The kvm_run struct
 */
@ -1095,7 +1094,7 @@ out:
 }

 /**
- * kvm_handle_cp15_32 -- handles a mrc/mcr trap on a guest CP15 access
+ * kvm_handle_cp_32 -- handles a mrc/mcr trap on a guest CP14/CP15 access
 * @vcpu: The VCPU pointer
 * @run:  The kvm_run struct
 */
--- a/arch/arm64/mm/dump.c
+++ b/arch/arm64/mm/dump.c
@ -46,7 +46,7 @@ enum address_markers_idx {
 	PCI_START_NR,
 	PCI_END_NR,
 	MODULES_START_NR,
-	MODUELS_END_NR,
+	MODULES_END_NR,
 	KERNEL_SPACE_NR,
 };

--- a/arch/arm64/mm/kasan_init.c
+++ b/arch/arm64/mm/kasan_init.c
@ -120,6 +120,7 @@ static void __init cpu_set_ttbr1(unsigned long ttbr1)
 void __init kasan_init(void)
 {
 	struct memblock_region *reg;
+	int i;

 	/*
 	 * We are going to perform proper setup of shadow memory.
@ -155,6 +156,14 @@ void __init kasan_init(void)
 				pfn_to_nid(virt_to_pfn(start)));
 	}

+	/*
+	 * KAsan may reuse the contents of kasan_zero_pte directly, so we
+	 * should make sure that it maps the zero page read-only.
+	 */
+	for (i = 0; i < PTRS_PER_PTE; i++)
+		set_pte(&kasan_zero_pte[i],
+			pfn_pte(virt_to_pfn(kasan_zero_page), PAGE_KERNEL_RO));
+
 	memset(kasan_zero_page, 0, PAGE_SIZE);
 	cpu_set_ttbr1(__pa(swapper_pg_dir));
 	flush_tlb_all();
--- a/arch/arm64/mm/pageattr.c
+++ b/arch/arm64/mm/pageattr.c
@ -14,6 +14,7 @@
 #include <linux/mm.h>
 #include <linux/module.h>
 #include <linux/sched.h>
+#include <linux/vmalloc.h>

 #include <asm/pgtable.h>
 #include <asm/tlbflush.h>
@ -44,6 +45,7 @@ static int change_memory_common(unsigned long addr, int numpages,
 	unsigned long end = start + size;
 	int ret;
 	struct page_change_data data;
+	struct vm_struct *area;

 	if (!PAGE_ALIGNED(addr)) {
 		start &= PAGE_MASK;
@ -51,11 +53,27 @@ static int change_memory_common(unsigned long addr, int numpages,
 		WARN_ON_ONCE(1);
 	}

-	if (start < MODULES_VADDR || start >= MODULES_END)
+	/*
+	 * Kernel VA mappings are always live, and splitting live section
+	 * mappings into page mappings may cause TLB conflicts. This means
+	 * we have to ensure that changing the permission bits of the range
+	 * we are operating on does not result in such splitting.
+	 *
+	 * Let's restrict ourselves to mappings created by vmalloc (or vmap).
+	 * Those are guaranteed to consist entirely of page mappings, and
+	 * splitting is never needed.
+	 *
+	 * So check whether the [addr, addr + size) interval is entirely
+	 * covered by precisely one VM area that has the VM_ALLOC flag set.
+	 */
+	area = find_vm_area((void *)addr);
+	if (!area ||
+	    end > (unsigned long)area->addr + area->size ||
+	    !(area->flags & VM_ALLOC))
 		return -EINVAL;

-	if (end < MODULES_VADDR || end >= MODULES_END)
-		return -EINVAL;
+	if (!numpages)
+		return 0;

 	data.set_mask = set_mask;
 	data.clear_mask = clear_mask;
--- a/arch/arm64/mm/proc-macros.S
+++ b/arch/arm64/mm/proc-macros.S
@ -84,3 +84,15 @@
 	b.lo	9998b
 	dsb	\domain
 	.endm
+
+/*
+ * reset_pmuserenr_el0 - reset PMUSERENR_EL0 if PMUv3 present
+ */
+	.macro	reset_pmuserenr_el0, tmpreg
+	mrs	\tmpreg, id_aa64dfr0_el1	// Check ID_AA64DFR0_EL1 PMUVer
+	sbfx	\tmpreg, \tmpreg, #8, #4
+	cmp	\tmpreg, #1			// Skip if no PMU present
+	b.lt	9000f
+	msr	pmuserenr_el0, xzr		// Disable PMU access from EL0
+9000:
+	.endm
--- a/arch/arm64/mm/proc.S
+++ b/arch/arm64/mm/proc.S
@ -117,7 +117,7 @@ ENTRY(cpu_do_resume)
 	 */
 	ubfx	x11, x11, #1, #1
 	msr	oslar_el1, x11
-	msr	pmuserenr_el0, xzr		// Disable PMU access from EL0
+	reset_pmuserenr_el0 x0			// Disable PMU access from EL0
 	mov	x0, x12
 	dsb	nsh		// Make sure local tlb invalidation completed
 	isb
@ -154,7 +154,7 @@ ENTRY(__cpu_setup)
 	msr	cpacr_el1, x0			// Enable FP/ASIMD
 	mov	x0, #1 << 12			// Reset mdscr_el1 and disable
 	msr	mdscr_el1, x0			// access to the DCC from EL0
-	msr	pmuserenr_el0, xzr		// Disable PMU access from EL0
+	reset_pmuserenr_el0 x0			// Disable PMU access from EL0
 	/*
 	 * Memory region attributes for LPAE:
 	 *
--- a/arch/m32r/Kconfig
+++ b/arch/m32r/Kconfig
@ -276,6 +276,7 @@ source "kernel/Kconfig.preempt"

 config SMP
 	bool "Symmetric multi-processing support"
+	depends on MMU
 	---help---
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, say N. If you have a system with more
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@ -2085,7 +2085,7 @@ config PAGE_SIZE_32KB

 config PAGE_SIZE_64KB
 	bool "64kB"
-	depends on !CPU_R3000 && !CPU_TX39XX
+	depends on !CPU_R3000 && !CPU_TX39XX && !CPU_R6000
 	help
 	  Using 64kB page size will result in higher performance kernel at
 	  the price of higher memory consumption.  This option is available on
--- a/arch/mips/bcm63xx/nvram.c
+++ b/arch/mips/bcm63xx/nvram.c
@ -19,6 +19,8 @@

 #include <bcm63xx_nvram.h>

+#define BCM63XX_DEFAULT_PSI_SIZE	64
+
 static struct bcm963xx_nvram nvram;
 static int mac_addr_used;

@ -85,3 +87,12 @@ int bcm63xx_nvram_get_mac_address(u8 *mac)
 	return 0;
 }
 EXPORT_SYMBOL(bcm63xx_nvram_get_mac_address);
+
+int bcm63xx_nvram_get_psi_size(void)
+{
+	if (nvram.psi_size > 0)
+		return nvram.psi_size;
+
+	return BCM63XX_DEFAULT_PSI_SIZE;
+}
+EXPORT_SYMBOL(bcm63xx_nvram_get_psi_size);
--- a/arch/mips/boot/dts/brcm/bcm6328.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm6328.dtsi
@ -74,6 +74,7 @@
 		timer: timer@10000040 {
 			compatible = "syscon";
 			reg = <0x10000040 0x2c>;
+			little-endian;
 		};

 		reboot {
--- a/arch/mips/boot/dts/brcm/bcm7125.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7125.dtsi
@ -98,6 +98,7 @@
 		sun_top_ctrl: syscon@404000 {
 			compatible = "brcm,bcm7125-sun-top-ctrl", "syscon";
 			reg = <0x404000 0x60c>;
+			little-endian;
 		};

 		reboot {
--- a/arch/mips/boot/dts/brcm/bcm7346.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7346.dtsi
@ -118,6 +118,7 @@
 		sun_top_ctrl: syscon@404000 {
 			compatible = "brcm,bcm7346-sun-top-ctrl", "syscon";
 			reg = <0x404000 0x51c>;
+			little-endian;
 		};

 		reboot {
--- a/arch/mips/boot/dts/brcm/bcm7358.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7358.dtsi
@ -112,6 +112,7 @@
 		sun_top_ctrl: syscon@404000 {
 			compatible = "brcm,bcm7358-sun-top-ctrl", "syscon";
 			reg = <0x404000 0x51c>;
+			little-endian;
 		};

 		reboot {
--- a/arch/mips/boot/dts/brcm/bcm7360.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7360.dtsi
@ -112,6 +112,7 @@
 		sun_top_ctrl: syscon@404000 {
 			compatible = "brcm,bcm7360-sun-top-ctrl", "syscon";
 			reg = <0x404000 0x51c>;
+			little-endian;
 		};

 		reboot {
--- a/arch/mips/boot/dts/brcm/bcm7362.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7362.dtsi
@ -118,6 +118,7 @@
 		sun_top_ctrl: syscon@404000 {
 			compatible = "brcm,bcm7362-sun-top-ctrl", "syscon";
 			reg = <0x404000 0x51c>;
+			little-endian;
 		};

 		reboot {
--- a/arch/mips/boot/dts/brcm/bcm7420.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7420.dtsi
@ -99,6 +99,7 @@
 		sun_top_ctrl: syscon@404000 {
 			compatible = "brcm,bcm7420-sun-top-ctrl", "syscon";
 			reg = <0x404000 0x60c>;
+			little-endian;
 		};

 		reboot {
--- a/arch/mips/boot/dts/brcm/bcm7425.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7425.dtsi
@ -100,6 +100,7 @@
 		sun_top_ctrl: syscon@404000 {
 			compatible = "brcm,bcm7425-sun-top-ctrl", "syscon";
 			reg = <0x404000 0x51c>;
+			little-endian;
 		};

 		reboot {
--- a/arch/mips/boot/dts/brcm/bcm7435.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7435.dtsi
@ -114,6 +114,7 @@
 		sun_top_ctrl: syscon@404000 {
 			compatible = "brcm,bcm7425-sun-top-ctrl", "syscon";
 			reg = <0x404000 0x51c>;
+			little-endian;
 		};

 		reboot {
--- a/arch/mips/include/asm/elf.h
+++ b/arch/mips/include/asm/elf.h
@ -227,7 +227,7 @@ struct mips_elf_abiflags_v0 {
 	int __res = 1;							\
 	struct elfhdr *__h = (hdr);					\
 									\
-	if (__h->e_machine != EM_MIPS)					\
+	if (!mips_elf_check_machine(__h))				\
 		__res = 0;						\
 	if (__h->e_ident[EI_CLASS] != ELFCLASS32)			\
 		__res = 0;						\
@ -258,7 +258,7 @@ struct mips_elf_abiflags_v0 {
 	int __res = 1;							\
 	struct elfhdr *__h = (hdr);					\
 									\
-	if (__h->e_machine != EM_MIPS)					\
+	if (!mips_elf_check_machine(__h))				\
 		__res = 0;						\
 	if (__h->e_ident[EI_CLASS] != ELFCLASS64)			\
 		__res = 0;						\
@ -285,6 +285,11 @@ struct mips_elf_abiflags_v0 {

 #endif /* !defined(ELF_ARCH) */

+#define mips_elf_check_machine(x) ((x)->e_machine == EM_MIPS)
+
+#define vmcore_elf32_check_arch mips_elf_check_machine
+#define vmcore_elf64_check_arch mips_elf_check_machine
+
 struct mips_abi;

 extern struct mips_abi mips_abi;
--- a/Show More
+++ b/Show More