iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

x86-64: Rework vsyscall emulation and add vsyscall= parameter

Browse Source 
There are three choices:

vsyscall=native: Vsyscalls are native code that issues the
corresponding syscalls.

vsyscall=emulate (default): Vsyscalls are emulated by instruction
fault traps, tested in the bad_area path.  The actual contents of
the vsyscall page is the same as the vsyscall=native case except
that it's marked NX.  This way programs that make assumptions about
what the code in the page does will not be confused when they read
that code.

vsyscall=none: Trying to execute a vsyscall will segfault.

Signed-off-by: Andy Lutomirski <luto@mit.edu>
Link: http://lkml.kernel.org/r/8449fb3abf89851fd6b2260972666a6f82542284.1312988155.git.luto@mit.edu
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
This commit is contained in:
Andy Lutomirski 2011-08-10 11:15:32 -04:00 committed by H. Peter Anvin
parent fce8dc0642
commit 3ae36655b9
10 changed files with 111 additions and 89 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

21
Documentation/kernel-parameters.txt
View File

@ -2657,6 +2657,27 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
vmpoff= [KNL,S390] Perform z/VM CP command after power off.
Format: <command>
vsyscall= [X86-64]
Controls the behavior of vsyscalls (i.e. calls to
fixed addresses of 0xffffffffff600x00 from legacy
code). Most statically-linked binaries and older
versions of glibc use these calls. Because these
functions are at fixed addresses, they make nice
targets for exploits that can control RIP.
emulate [default] Vsyscalls turn into traps and are
emulated reasonably safely.
native Vsyscalls are native syscall instructions.
This is a little bit faster than trapping
and makes a few dynamic recompilers work
better than they would in emulation mode.
It also makes exploits much easier to write.
none Vsyscalls don't work at all. This makes
them quite hard to use for exploits but
might break your system.
vt.cur_default= [VT] Default cursor shape.
Format: 0xCCBBAA, where AA, BB, and CC are the same as
the parameters of the <Esc>[?A;B;Cc escape sequence;

4
arch/x86/include/asm/irq_vectors.h
View File

@ -17,7 +17,6 @@
* Vectors 0 ... 31 : system traps and exceptions - hardcoded events
* Vectors 32 ... 127 : device interrupts
* Vector 128 : legacy int80 syscall interface
* Vector 204 : legacy x86_64 vsyscall emulation
* Vectors 129 ... INVALIDATE_TLB_VECTOR_START-1 except 204 : device interrupts
* Vectors INVALIDATE_TLB_VECTOR_START ... 255 : special interrupts
*
@ -51,9 +50,6 @@
#ifdef CONFIG_X86_32
# define SYSCALL_VECTOR 0x80
#endif
#ifdef CONFIG_X86_64
# define VSYSCALL_EMU_VECTOR 0xcc
#endif
/*
* Vectors 0x30-0x3f are used for ISA interrupts.

2
arch/x86/include/asm/traps.h
View File

@ -40,7 +40,6 @@ asmlinkage void alignment_check(void);
asmlinkage void machine_check(void);
#endif /* CONFIG_X86_MCE */
asmlinkage void simd_coprocessor_error(void);
asmlinkage void emulate_vsyscall(void);
dotraplinkage void do_divide_error(struct pt_regs *, long);
dotraplinkage void do_debug(struct pt_regs *, long);
@ -67,7 +66,6 @@ dotraplinkage void do_alignment_check(struct pt_regs *, long);
dotraplinkage void do_machine_check(struct pt_regs *, long);
#endif
dotraplinkage void do_simd_coprocessor_error(struct pt_regs *, long);
dotraplinkage void do_emulate_vsyscall(struct pt_regs *, long);
#ifdef CONFIG_X86_32
dotraplinkage void do_iret_error(struct pt_regs *, long);
#endif

6
arch/x86/include/asm/vsyscall.h
View File

@ -27,6 +27,12 @@ extern struct timezone sys_tz;
extern void map_vsyscall(void);
/*
* Called on instruction fetch fault in vsyscall page.
* Returns true if handled.
*/
extern bool emulate_vsyscall(struct pt_regs *regs, unsigned long address);
#endif /* __KERNEL__ */
#endif /* _ASM_X86_VSYSCALL_H */

1
arch/x86/kernel/entry_64.S
View File

@ -1123,7 +1123,6 @@ zeroentry spurious_interrupt_bug do_spurious_interrupt_bug
zeroentry coprocessor_error do_coprocessor_error
errorentry alignment_check do_alignment_check
zeroentry simd_coprocessor_error do_simd_coprocessor_error
zeroentry emulate_vsyscall do_emulate_vsyscall
/* Reload gs selector with exception handling */

6
arch/x86/kernel/traps.c
View File

@ -872,12 +872,6 @@ void __init trap_init(void)
set_bit(SYSCALL_VECTOR, used_vectors);
#endif
#ifdef CONFIG_X86_64
BUG_ON(test_bit(VSYSCALL_EMU_VECTOR, used_vectors));
set_system_intr_gate(VSYSCALL_EMU_VECTOR, &emulate_vsyscall);
set_bit(VSYSCALL_EMU_VECTOR, used_vectors);
#endif
/*
* Should be a barrier for any external CPU state:
*/

33
arch/x86/kernel/vmlinux.lds.S
View File

@ -71,7 +71,6 @@ PHDRS {
text PT_LOAD FLAGS(5); /* R_E */
data PT_LOAD FLAGS(6); /* RW_ */
#ifdef CONFIG_X86_64
user PT_LOAD FLAGS(5); /* R_E */
#ifdef CONFIG_SMP
percpu PT_LOAD FLAGS(6); /* RW_ */
#endif
@ -174,38 +173,6 @@ SECTIONS
. = ALIGN(__vvar_page + PAGE_SIZE, PAGE_SIZE);
#define VSYSCALL_ADDR (-10*1024*1024)
#define VLOAD_OFFSET (VSYSCALL_ADDR - __vsyscall_0 + LOAD_OFFSET)
#define VLOAD(x) (ADDR(x) - VLOAD_OFFSET)
#define VVIRT_OFFSET (VSYSCALL_ADDR - __vsyscall_0)
#define VVIRT(x) (ADDR(x) - VVIRT_OFFSET)
__vsyscall_0 = .;
. = VSYSCALL_ADDR;
.vsyscall : AT(VLOAD(.vsyscall)) {
/* work around gold bug 13023 */
__vsyscall_beginning_hack = .;
*(.vsyscall_0)
. = __vsyscall_beginning_hack + 1024;
*(.vsyscall_1)
. = __vsyscall_beginning_hack + 2048;
*(.vsyscall_2)
. = __vsyscall_beginning_hack + 4096; /* Pad the whole page. */
} :user =0xcc
. = ALIGN(__vsyscall_0 + PAGE_SIZE, PAGE_SIZE);
#undef VSYSCALL_ADDR
#undef VLOAD_OFFSET
#undef VLOAD
#undef VVIRT_OFFSET
#undef VVIRT
#endif /* CONFIG_X86_64 */
/* Init code and data - will be freed after init */

79
arch/x86/kernel/vsyscall_64.c
View File

@ -56,6 +56,27 @@ DEFINE_VVAR(struct vsyscall_gtod_data, vsyscall_gtod_data) =
.lock = __SEQLOCK_UNLOCKED(__vsyscall_gtod_data.lock),
};
static enum { EMULATE, NATIVE, NONE } vsyscall_mode = EMULATE;
static int __init vsyscall_setup(char *str)
{
if (str) {
if (!strcmp("emulate", str))
vsyscall_mode = EMULATE;
else if (!strcmp("native", str))
vsyscall_mode = NATIVE;
else if (!strcmp("none", str))
vsyscall_mode = NONE;
else
return -EINVAL;
return 0;
}
return -EINVAL;
}
early_param("vsyscall", vsyscall_setup);
void update_vsyscall_tz(void)
{
unsigned long flags;
@ -100,7 +121,7 @@ static void warn_bad_vsyscall(const char *level, struct pt_regs *regs,
printk("%s%s[%d] %s ip:%lx cs:%lx sp:%lx ax:%lx si:%lx di:%lx\n",
level, tsk->comm, task_pid_nr(tsk),
message, regs->ip - 2, regs->cs,
message, regs->ip, regs->cs,
regs->sp, regs->ax, regs->si, regs->di);
}
@ -118,45 +139,39 @@ static int addr_to_vsyscall_nr(unsigned long addr)
return nr;
}
void dotraplinkage do_emulate_vsyscall(struct pt_regs *regs, long error_code)
bool emulate_vsyscall(struct pt_regs *regs, unsigned long address)
{
struct task_struct *tsk;
unsigned long caller;
int vsyscall_nr;
long ret;
local_irq_enable();
/*
* No point in checking CS -- the only way to get here is a user mode
* trap to a high address, which means that we're in 64-bit user code.
*/
if (!user_64bit_mode(regs)) {
/*
* If we trapped from kernel mode, we might as well OOPS now
* instead of returning to some random address and OOPSing
* then.
*/
BUG_ON(!user_mode(regs));
WARN_ON_ONCE(address != regs->ip);
/* Compat mode and non-compat 32-bit CS should both segfault. */
warn_bad_vsyscall(KERN_WARNING, regs,
"illegal int 0xcc from 32-bit mode");
goto sigsegv;
if (vsyscall_mode == NONE) {
warn_bad_vsyscall(KERN_INFO, regs,
"vsyscall attempted with vsyscall=none");
return false;
}
/*
* x86-ism here: regs->ip points to the instruction after the int 0xcc,
* and int 0xcc is two bytes long.
*/
vsyscall_nr = addr_to_vsyscall_nr(regs->ip - 2);
vsyscall_nr = addr_to_vsyscall_nr(address);
trace_emulate_vsyscall(vsyscall_nr);
if (vsyscall_nr < 0) {
warn_bad_vsyscall(KERN_WARNING, regs,
"illegal int 0xcc (exploit attempt?)");
"misaligned vsyscall (exploit attempt or buggy program) -- look up the vsyscall kernel parameter if you need a workaround");
goto sigsegv;
}
if (get_user(caller, (unsigned long __user *)regs->sp) != 0) {
warn_bad_vsyscall(KERN_WARNING, regs, "int 0xcc with bad stack (exploit attempt?)");
warn_bad_vsyscall(KERN_WARNING, regs,
"vsyscall with bad stack (exploit attempt?)");
goto sigsegv;
}
@ -201,13 +216,11 @@ void dotraplinkage do_emulate_vsyscall(struct pt_regs *regs, long error_code)
regs->ip = caller;
regs->sp += 8;
local_irq_disable();
return;
return true;
sigsegv:
regs->ip -= 2; /* The faulting instruction should be the int 0xcc. */
force_sig(SIGSEGV, current);
local_irq_disable();
return true;
}
/*
@ -255,15 +268,21 @@ cpu_vsyscall_notifier(struct notifier_block *n, unsigned long action, void *arg)
void __init map_vsyscall(void)
{
extern char __vsyscall_0;
unsigned long physaddr_page0 = __pa_symbol(&__vsyscall_0);
extern char __vsyscall_page;
unsigned long physaddr_vsyscall = __pa_symbol(&__vsyscall_page);
extern char __vvar_page;
unsigned long physaddr_vvar_page = __pa_symbol(&__vvar_page);
/* Note that VSYSCALL_MAPPED_PAGES must agree with the code below. */
__set_fixmap(VSYSCALL_FIRST_PAGE, physaddr_page0, PAGE_KERNEL_VSYSCALL);
__set_fixmap(VSYSCALL_FIRST_PAGE, physaddr_vsyscall,
vsyscall_mode == NATIVE
? PAGE_KERNEL_VSYSCALL
: PAGE_KERNEL_VVAR);
BUILD_BUG_ON((unsigned long)__fix_to_virt(VSYSCALL_FIRST_PAGE) !=
(unsigned long)VSYSCALL_START);
__set_fixmap(VVAR_PAGE, physaddr_vvar_page, PAGE_KERNEL_VVAR);
BUILD_BUG_ON((unsigned long)__fix_to_virt(VVAR_PAGE) != (unsigned long)VVAR_ADDRESS);
BUILD_BUG_ON((unsigned long)__fix_to_virt(VVAR_PAGE) !=
(unsigned long)VVAR_ADDRESS);
}
static int __init vsyscall_init(void)

36
arch/x86/kernel/vsyscall_emu_64.S
View File

@ -7,21 +7,31 @@
*/
#include <linux/linkage.h>
#include <asm/irq_vectors.h>
#include <asm/page_types.h>
#include <asm/unistd_64.h>
/* The unused parts of the page are filled with 0xcc by the linker script. */
__PAGE_ALIGNED_DATA
.globl __vsyscall_page
.balign PAGE_SIZE, 0xcc
.type __vsyscall_page, @object
__vsyscall_page:
.section .vsyscall_0, "a"
ENTRY(vsyscall_0)
int $VSYSCALL_EMU_VECTOR
END(vsyscall_0)
mov $__NR_gettimeofday, %rax
syscall
ret
.section .vsyscall_1, "a"
ENTRY(vsyscall_1)
int $VSYSCALL_EMU_VECTOR
END(vsyscall_1)
.balign 1024, 0xcc
mov $__NR_time, %rax
syscall
ret
.section .vsyscall_2, "a"
ENTRY(vsyscall_2)
int $VSYSCALL_EMU_VECTOR
END(vsyscall_2)
.balign 1024, 0xcc
mov $__NR_getcpu, %rax
syscall
ret
.balign 4096, 0xcc
.size __vsyscall_page, 4096

12
arch/x86/mm/fault.c
View File

@ -720,6 +720,18 @@ __bad_area_nosemaphore(struct pt_regs *regs, unsigned long error_code,
if (is_errata100(regs, address))
return;
#ifdef CONFIG_X86_64
/*
* Instruction fetch faults in the vsyscall page might need
* emulation.
*/
if (unlikely((error_code & PF_INSTR) &&
((address & ~0xfff) == VSYSCALL_START))) {
if (emulate_vsyscall(regs, address))
return;
}
#endif
if (unlikely(show_unhandled_signals))
show_signal_msg(regs, error_code, address, tsk);