iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

staging: et131x: Remove redundant phy code

Browse Source 
Now we are using a phy_device, remove driver functionality that is now handled by the phydev.

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
Mark Einon 2011-08-30 12:47:24 +01:00 committed by Greg Kroah-Hartman
parent f660732fdc
commit 3cecd9203c
4 changed files with 15 additions and 452 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

415
drivers/staging/et131x/et1310_phy.c
View File

@ -122,7 +122,7 @@ int et131x_mdio_reset(struct mii_bus *bus)
struct net_device *netdev = bus->priv;
struct et131x_adapter *adapter = netdev_priv(netdev);
et1310_phy_reset(adapter);
et131x_mii_write(adapter, PHY_CONTROL, 0x8000);
return 0;
}
@ -278,11 +278,6 @@ int et131x_mii_write(struct et131x_adapter *adapter, u8 reg, u16 value)
return status;
}
void et1310_phy_reset(struct et131x_adapter *adapter)
{
et131x_mii_write(adapter, PHY_CONTROL, 0x8000);
}
/**
* et1310_phy_power_down - PHY power control
* @adapter: device to control
@ -304,63 +299,6 @@ void et1310_phy_power_down(struct et131x_adapter *adapter, bool down)
et131x_mii_write(adapter, PHY_CONTROL, data);
}
/**
* et1310_phy_auto_neg - autonegotiate control
* @adapter: device to control
* @enabe: autoneg on/off
*
* Set up the autonegotiation state according to whether we will be
* negotiating the state or forcing a speed.
*/
static void et1310_phy_auto_neg(struct et131x_adapter *adapter, bool enable)
{
u16 data;
et131x_mii_read(adapter, PHY_CONTROL, &data);
data &= ~0x1000; /* Autonegotiation OFF */
if (enable)
data |= 0x1000; /* Autonegotiation ON */
et131x_mii_write(adapter, PHY_CONTROL, data);
}
/**
* et1310_phy_duplex_mode - duplex control
* @adapter: device to control
* @duplex: duplex on/off
*
* Set up the duplex state on the PHY
*/
static void et1310_phy_duplex_mode(struct et131x_adapter *adapter, u16 duplex)
{
u16 data;
et131x_mii_read(adapter, PHY_CONTROL, &data);
data &= ~0x100; /* Set Half Duplex */
if (duplex == TRUEPHY_DUPLEX_FULL)
data |= 0x100; /* Set Full Duplex */
et131x_mii_write(adapter, PHY_CONTROL, data);
}
/**
* et1310_phy_speed_select - speed control
* @adapter: device to control
* @duplex: duplex on/off
*
* Set the speed of our PHY.
*/
static void et1310_phy_speed_select(struct et131x_adapter *adapter, u16 speed)
{
u16 data;
static const u16 bits[3] = {0x0000, 0x2000, 0x0040};
/* Read the PHY control register */
et131x_mii_read(adapter, PHY_CONTROL, &data);
/* Clear all Speed settings (Bits 6, 13) */
data &= ~0x2040;
/* Write back the new speed */
et131x_mii_write(adapter, PHY_CONTROL, data | bits[speed]);
}
/**
* et1310_phy_link_status - read link state
* @adapter: device to read
@ -450,122 +388,12 @@ void et1310_phy_access_mii_bit(struct et131x_adapter *adapter, u16 action,
}
}
void et1310_phy_advertise_1000BaseT(struct et131x_adapter *adapter,
u16 duplex)
{
u16 data;
/* Read the PHY 1000 Base-T Control Register */
et131x_mii_read(adapter, PHY_1000_CONTROL, &data);
/* Clear Bits 8,9 */
data &= ~0x0300;
switch (duplex) {
case TRUEPHY_ADV_DUPLEX_NONE:
/* Duplex already cleared, do nothing */
break;
case TRUEPHY_ADV_DUPLEX_FULL:
/* Set Bit 9 */
data |= 0x0200;
break;
case TRUEPHY_ADV_DUPLEX_HALF:
/* Set Bit 8 */
data |= 0x0100;
break;
case TRUEPHY_ADV_DUPLEX_BOTH:
default:
data |= 0x0300;
break;
}
/* Write back advertisement */
et131x_mii_write(adapter, PHY_1000_CONTROL, data);
}
static void et1310_phy_advertise_100BaseT(struct et131x_adapter *adapter,
u16 duplex)
{
u16 data;
/* Read the Autonegotiation Register (10/100) */
et131x_mii_read(adapter, PHY_AUTO_ADVERTISEMENT, &data);
/* Clear bits 7,8 */
data &= ~0x0180;
switch (duplex) {
case TRUEPHY_ADV_DUPLEX_NONE:
/* Duplex already cleared, do nothing */
break;
case TRUEPHY_ADV_DUPLEX_FULL:
/* Set Bit 8 */
data |= 0x0100;
break;
case TRUEPHY_ADV_DUPLEX_HALF:
/* Set Bit 7 */
data |= 0x0080;
break;
case TRUEPHY_ADV_DUPLEX_BOTH:
default:
/* Set Bits 7,8 */
data |= 0x0180;
break;
}
/* Write back advertisement */
et131x_mii_write(adapter, PHY_AUTO_ADVERTISEMENT, data);
}
static void et1310_phy_advertise_10BaseT(struct et131x_adapter *adapter,
u16 duplex)
{
u16 data;
/* Read the Autonegotiation Register (10/100) */
et131x_mii_read(adapter, PHY_AUTO_ADVERTISEMENT, &data);
/* Clear bits 5,6 */
data &= ~0x0060;
switch (duplex) {
case TRUEPHY_ADV_DUPLEX_NONE:
/* Duplex already cleared, do nothing */
break;
case TRUEPHY_ADV_DUPLEX_FULL:
/* Set Bit 6 */
data |= 0x0040;
break;
case TRUEPHY_ADV_DUPLEX_HALF:
/* Set Bit 5 */
data |= 0x0020;
break;
case TRUEPHY_ADV_DUPLEX_BOTH:
default:
/* Set Bits 5,6 */
data |= 0x0060;
break;
}
/* Write back advertisement */
et131x_mii_write(adapter, PHY_AUTO_ADVERTISEMENT, data);
}
/**
* et131x_xcvr_init - Init the phy if we are setting it into force mode
* @adapter: pointer to our private adapter structure
*
*/
static void et131x_xcvr_init(struct et131x_adapter *adapter)
void et131x_xcvr_init(struct et131x_adapter *adapter)
{
u16 imr;
u16 isr;
@ -607,132 +435,6 @@ static void et131x_xcvr_init(struct et131x_adapter *adapter)
et131x_mii_write(adapter, (u8) offsetof(struct mi_regs, lcr2),
lcr2);
}
/* Determine if we need to go into a force mode and set it */
if (adapter->ai_force_speed == 0 && adapter->ai_force_duplex == 0) {
if (adapter->wanted_flow == FLOW_TXONLY ||
adapter->wanted_flow == FLOW_BOTH)
et1310_phy_access_mii_bit(adapter,
TRUEPHY_BIT_SET, 4, 11, NULL);
else
et1310_phy_access_mii_bit(adapter,
TRUEPHY_BIT_CLEAR, 4, 11, NULL);
if (adapter->wanted_flow == FLOW_BOTH)
et1310_phy_access_mii_bit(adapter,
TRUEPHY_BIT_SET, 4, 10, NULL);
else
et1310_phy_access_mii_bit(adapter,
TRUEPHY_BIT_CLEAR, 4, 10, NULL);
/* Set the phy to autonegotiation */
et1310_phy_auto_neg(adapter, true);
/* NOTE - Do we need this? */
et1310_phy_access_mii_bit(adapter, TRUEPHY_BIT_SET, 0, 9, NULL);
return;
}
et1310_phy_auto_neg(adapter, false);
/* Set to the correct force mode. */
if (adapter->ai_force_duplex != 1) {
if (adapter->wanted_flow == FLOW_TXONLY ||
adapter->wanted_flow == FLOW_BOTH)
et1310_phy_access_mii_bit(adapter,
TRUEPHY_BIT_SET, 4, 11, NULL);
else
et1310_phy_access_mii_bit(adapter,
TRUEPHY_BIT_CLEAR, 4, 11, NULL);
if (adapter->wanted_flow == FLOW_BOTH)
et1310_phy_access_mii_bit(adapter,
TRUEPHY_BIT_SET, 4, 10, NULL);
else
et1310_phy_access_mii_bit(adapter,
TRUEPHY_BIT_CLEAR, 4, 10, NULL);
} else {
et1310_phy_access_mii_bit(adapter, TRUEPHY_BIT_CLEAR,
4, 10, NULL);
et1310_phy_access_mii_bit(adapter, TRUEPHY_BIT_CLEAR,
4, 11, NULL);
}
et1310_phy_power_down(adapter, 1);
switch (adapter->ai_force_speed) {
case 10:
/* First we need to turn off all other advertisement */
et1310_phy_advertise_1000BaseT(adapter, TRUEPHY_ADV_DUPLEX_NONE);
et1310_phy_advertise_100BaseT(adapter, TRUEPHY_ADV_DUPLEX_NONE);
if (adapter->ai_force_duplex == 1) {
/* Set our advertise values accordingly */
et1310_phy_advertise_10BaseT(adapter,
TRUEPHY_ADV_DUPLEX_HALF);
} else if (adapter->ai_force_duplex == 2) {
/* Set our advertise values accordingly */
et1310_phy_advertise_10BaseT(adapter,
TRUEPHY_ADV_DUPLEX_FULL);
} else {
/* Disable autoneg */
et1310_phy_auto_neg(adapter, false);
/* Disable rest of the advertisements */
et1310_phy_advertise_10BaseT(adapter,
TRUEPHY_ADV_DUPLEX_NONE);
/* Force 10 Mbps */
et1310_phy_speed_select(adapter, TRUEPHY_SPEED_10MBPS);
/* Force Full duplex */
et1310_phy_duplex_mode(adapter, TRUEPHY_DUPLEX_FULL);
}
break;
case 100:
/* first we need to turn off all other advertisement */
et1310_phy_advertise_1000BaseT(adapter, TRUEPHY_ADV_DUPLEX_NONE);
et1310_phy_advertise_10BaseT(adapter, TRUEPHY_ADV_DUPLEX_NONE);
if (adapter->ai_force_duplex == 1) {
/* Set our advertise values accordingly */
et1310_phy_advertise_100BaseT(adapter,
TRUEPHY_ADV_DUPLEX_HALF);
/* Set speed */
et1310_phy_speed_select(adapter, TRUEPHY_SPEED_100MBPS);
} else if (adapter->ai_force_duplex == 2) {
/* Set our advertise values accordingly */
et1310_phy_advertise_100BaseT(adapter,
TRUEPHY_ADV_DUPLEX_FULL);
} else {
/* Disable autoneg */
et1310_phy_auto_neg(adapter, false);
/* Disable other advertisement */
et1310_phy_advertise_100BaseT(adapter,
TRUEPHY_ADV_DUPLEX_NONE);
/* Force 100 Mbps */
et1310_phy_speed_select(adapter, TRUEPHY_SPEED_100MBPS);
/* Force Full duplex */
et1310_phy_duplex_mode(adapter, TRUEPHY_DUPLEX_FULL);
}
break;
case 1000:
/* first we need to turn off all other advertisement */
et1310_phy_advertise_100BaseT(adapter, TRUEPHY_ADV_DUPLEX_NONE);
et1310_phy_advertise_10BaseT(adapter, TRUEPHY_ADV_DUPLEX_NONE);
/* set our advertise values accordingly */
et1310_phy_advertise_1000BaseT(adapter, TRUEPHY_ADV_DUPLEX_FULL);
break;
}
et1310_phy_power_down(adapter, 0);
}
/**
* et131x_setphy_normal - Set PHY for normal operation.
* @adapter: pointer to our private adapter structure
*
* Used by Power Management to force the PHY into 10 Base T half-duplex mode,
* when going to D3 in WOL mode. Also used during initialization to set the
* PHY for normal operation.
*/
void et131x_setphy_normal(struct et131x_adapter *adapter)
{
/* Make sure the PHY is powered up */
et1310_phy_power_down(adapter, 0);
et131x_xcvr_init(adapter);
}
void et131x_mii_check(struct et131x_adapter *adapter,
@ -847,116 +549,3 @@ void et131x_mii_check(struct et131x_adapter *adapter,
}
}
/*
* The routines which follow provide low-level access to the PHY, and are used
* primarily by the routines above (although there are a few places elsewhere
* in the driver where this level of access is required).
*/
static const u16 config_phy[25][2] = {
/* Reg Value Register */
/* Addr */
{0x880B, 0x0926}, /* AfeIfCreg4B1000Msbs */
{0x880C, 0x0926}, /* AfeIfCreg4B100Msbs */
{0x880D, 0x0926}, /* AfeIfCreg4B10Msbs */
{0x880E, 0xB4D3}, /* AfeIfCreg4B1000Lsbs */
{0x880F, 0xB4D3}, /* AfeIfCreg4B100Lsbs */
{0x8810, 0xB4D3}, /* AfeIfCreg4B10Lsbs */
{0x8805, 0xB03E}, /* AfeIfCreg3B1000Msbs */
{0x8806, 0xB03E}, /* AfeIfCreg3B100Msbs */
{0x8807, 0xFF00}, /* AfeIfCreg3B10Msbs */
{0x8808, 0xE090}, /* AfeIfCreg3B1000Lsbs */
{0x8809, 0xE110}, /* AfeIfCreg3B100Lsbs */
{0x880A, 0x0000}, /* AfeIfCreg3B10Lsbs */
{0x300D, 1}, /* DisableNorm */
{0x280C, 0x0180}, /* LinkHoldEnd */
{0x1C21, 0x0002}, /* AlphaM */
{0x3821, 6}, /* FfeLkgTx0 */
{0x381D, 1}, /* FfeLkg1g4 */
{0x381E, 1}, /* FfeLkg1g5 */
{0x381F, 1}, /* FfeLkg1g6 */
{0x3820, 1}, /* FfeLkg1g7 */
{0x8402, 0x01F0}, /* Btinact */
{0x800E, 20}, /* LftrainTime */
{0x800F, 24}, /* DvguardTime */
{0x8010, 46}, /* IdlguardTime */
{0, 0}
};
/* condensed version of the phy initialization routine */
void et1310_phy_init(struct et131x_adapter *adapter)
{
u16 data, index;
/* get the identity (again ?) */
et131x_mii_read(adapter, PHY_ID_1, &data);
et131x_mii_read(adapter, PHY_ID_2, &data);
/* what does this do/achieve ? */
/* should read 0002 */
et131x_mii_read(adapter, PHY_MPHY_CONTROL_REG, &data);
et131x_mii_write(adapter, PHY_MPHY_CONTROL_REG, 0x0006);
/* read modem register 0402, should I do something with the return
data ? */
et131x_mii_write(adapter, PHY_INDEX_REG, 0x0402);
et131x_mii_read(adapter, PHY_DATA_REG, &data);
/* what does this do/achieve ? */
et131x_mii_write(adapter, PHY_MPHY_CONTROL_REG, 0x0002);
/* get the identity (again ?) */
et131x_mii_read(adapter, PHY_ID_1, &data);
et131x_mii_read(adapter, PHY_ID_2, &data);
/* what does this achieve ? */
/* should read 0002 */
et131x_mii_read(adapter, PHY_MPHY_CONTROL_REG, &data);
et131x_mii_write(adapter, PHY_MPHY_CONTROL_REG, 0x0006);
/* read modem register 0402, should I do something with
the return data? */
et131x_mii_write(adapter, PHY_INDEX_REG, 0x0402);
et131x_mii_read(adapter, PHY_DATA_REG, &data);
et131x_mii_write(adapter, PHY_MPHY_CONTROL_REG, 0x0002);
/* what does this achieve (should return 0x1040) */
et131x_mii_read(adapter, PHY_CONTROL, &data);
/* should read 0002 */
et131x_mii_read(adapter, PHY_MPHY_CONTROL_REG, &data);
et131x_mii_write(adapter, PHY_CONTROL, 0x1840);
et131x_mii_write(adapter, PHY_MPHY_CONTROL_REG, 0x0007);
/* here the writing of the array starts.... */
index = 0;
while (config_phy[index][0] != 0x0000) {
/* write value */
et131x_mii_write(adapter, PHY_INDEX_REG, config_phy[index][0]);
et131x_mii_write(adapter, PHY_DATA_REG, config_phy[index][1]);
/* read it back */
et131x_mii_write(adapter, PHY_INDEX_REG, config_phy[index][0]);
et131x_mii_read(adapter, PHY_DATA_REG, &data);
/* do a check on the value read back ? */
index++;
}
/* here the writing of the array ends... */
et131x_mii_read(adapter, PHY_CONTROL, &data); /* 0x1840 */
/* should read 0007 */
et131x_mii_read(adapter, PHY_MPHY_CONTROL_REG, &data);
et131x_mii_write(adapter, PHY_CONTROL, 0x1040);
et131x_mii_write(adapter, PHY_MPHY_CONTROL_REG, 0x0002);
}

15
drivers/staging/et131x/et1310_pm.c
View File

@ -116,8 +116,12 @@ void et1310_enable_phy_coma(struct et131x_adapter *adapter)
/* Save the GbE PHY speed and duplex modes. Need to restore this
* when cable is plugged back in
*/
adapter->pdown_speed = adapter->ai_force_speed;
adapter->pdown_duplex = adapter->ai_force_duplex;
/*
* TODO - when PM is re-enabled, check if we need to
* perform a similar task as this -
* adapter->pdown_speed = adapter->ai_force_speed;
* adapter->pdown_duplex = adapter->ai_force_duplex;
*/
/* Stop sending packets. */
spin_lock_irqsave(&adapter->send_hw_lock, flags);
@ -153,8 +157,11 @@ void et1310_disable_phy_coma(struct et131x_adapter *adapter)
/* Restore the GbE PHY speed and duplex modes;
* Reset JAGCore; re-configure and initialize JAGCore and gigE PHY
*/
adapter->ai_force_speed = adapter->pdown_speed;
adapter->ai_force_duplex = adapter->pdown_duplex;
/* TODO - when PM is re-enabled, check if we need to
* perform a similar task as this -
* adapter->ai_force_speed = adapter->pdown_speed;
* adapter->ai_force_duplex = adapter->pdown_duplex;
*/
/* Re-initialize the send structures */
et131x_init_send(adapter);

7
drivers/staging/et131x/et131x.h
View File

@ -89,17 +89,12 @@ void et1310_enable_phy_coma(struct et131x_adapter *adapter);
void et1310_disable_phy_coma(struct et131x_adapter *adapter);
/* et1310_phy.c */
void et1310_phy_init(struct et131x_adapter *adapter);
void et1310_phy_reset(struct et131x_adapter *adapter);
void et1310_phy_power_down(struct et131x_adapter *adapter, bool down);
void et1310_phy_advertise_1000BaseT(struct et131x_adapter *adapter,
u16 duplex);
void et1310_phy_access_mii_bit(struct et131x_adapter *adapter,
u16 action,
u16 regnum, u16 bitnum, u8 *value);
int et131x_xcvr_find(struct et131x_adapter *adapter);
void et131x_setphy_normal(struct et131x_adapter *adapter);
void et131x_xcvr_init(struct et131x_adapter *adapter);
/* static inline function does not work because et131x_adapter is not always
* defined

30
drivers/staging/et131x/et131x_initpci.c
View File

@ -137,7 +137,6 @@ void et131x_hwaddr_init(struct et131x_adapter *adapter)
}
}
/**
* et131x_pci_init - initial PCI setup
* @adapter: pointer to our private adapter structure
@ -146,7 +145,6 @@ void et131x_hwaddr_init(struct et131x_adapter *adapter)
* Perform the initial setup of PCI registers and if possible initialise
* the MAC address. At this point the I/O registers have yet to be mapped
*/
static int et131x_pci_init(struct et131x_adapter *adapter,
struct pci_dev *pdev)
{
@ -347,28 +345,8 @@ void et131x_adapter_setup(struct et131x_adapter *adapter)
et1310_config_macstat_regs(adapter);
/* Prepare the TRUEPHY library. */
et1310_phy_init(adapter);
/* Reset the phy now so changes take place */
et1310_phy_reset(adapter);
/* Power down PHY */
et1310_phy_power_down(adapter, 1);
/*
* We need to turn off 1000 base half dulplex, the mac does not
* support it. For the 10/100 part, turn off all gig advertisement
*/
if (adapter->pdev->device != ET131X_PCI_DEVICE_ID_FAST)
et1310_phy_advertise_1000BaseT(adapter, TRUEPHY_ADV_DUPLEX_FULL);
else
et1310_phy_advertise_1000BaseT(adapter, TRUEPHY_ADV_DUPLEX_NONE);
/* Power up PHY */
et1310_phy_power_down(adapter, 0);
et131x_setphy_normal(adapter);
et131x_xcvr_init(adapter);
}
/**
@ -547,8 +525,6 @@ static struct et131x_adapter *et131x_adapter_init(struct net_device *netdev,
struct pci_dev *pdev)
{
static const u8 default_mac[] = { 0x00, 0x05, 0x3d, 0x00, 0x02, 0x00 };
static const u8 duplex[] = { 0, 1, 2, 1, 2, 2 };
static const u16 speed[] = { 0, 10, 10, 100, 100, 1000 };
struct et131x_adapter *adapter;
@ -571,15 +547,11 @@ static struct et131x_adapter *et131x_adapter_init(struct net_device *netdev,
spin_lock_init(&adapter->fbr_lock);
spin_lock_init(&adapter->phy_lock);
adapter->speed_duplex = 0; /* Auto Speed Auto Duplex */
adapter->registry_jumbo_packet = 1514; /* 1514-9216 */
/* Set the MAC address to a default */
memcpy(adapter->addr, default_mac, ETH_ALEN);
adapter->ai_force_speed = speed[adapter->speed_duplex];
adapter->ai_force_duplex = duplex[adapter->speed_duplex]; /* Auto FDX */
return adapter;
}